YnHub Guide

YnHub Guide

2013-04-22 1:35 PM

Here i will try and explain how you setup your hub and get started. I wont explain howe these settings works, if you want a little better explanation of some settings, get into the GUI section on the page instead. I will skip some parts of YnHub, cause this should just be a quick up and go guide. So you have to fine tune your hub yourself later on. If you use these settings then the Admin and OP usercommand will fit, you will find them on this site. Step 1 First of all you need to download YnHub, the latest version is 1.036 YnHub 1.036 (1.0.36.152) TTH: ZMRK6OVCTEPM3D2G5REVMLECXE5HWE2MPM4PIII (magnet) After unpacking the rar file, you will se this. Just press the YnHub.exe file.

To the top

Step 2 - Hub

http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 1 of 22

YnHub Guide

2013-04-22 1:35 PM

1. Here you will see the uptime of your hub. 2. Here you start and stop your hub To the top

Step 3 - Settings

1.Hub control

http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 2 of 22

YnHub Guide

2013-04-22 1:35 PM

Autostart Lock hub Prompt on shutdown Minimize to tray Userlimit Workpace Port(s)

What ever you think is enough Normal 411 is default. to separate use ; to use more then one port (411;23;1411)

2.Here you will be abel to give you hub a name and the "bot" in your hub. The first box will name you hub. here it will be called The YnHub demo hub. The second box tells what you will call your bot, in this case -YnHub3. Hub address, description, language, saves, convert. In the first box you add your hub address, it can be a DNS or your external IP The second box you can type a short description of your hub. This part will be visible in the hublist later on if you choose to register your hub. Core language will change the language in your hub, but it will not change the language in the GUI. You can get the different languageshere. Mark the auto save box and set it to 60 minutes, then you wont need to press the save button every time you make a change. But remember to press the save button before a reboot of the hub, this is where most people do wrong when they have made a reboot and when the hub is started again, some accounts have disappeared. Now you are done here, lets get going to the next step.

To the top

Step 4 - Redirects

http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 3 of 22

YnHub Guide

2013-04-22 1:35 PM

1. Here you choose if you want to use the different redirects or not by marking the box. 2. Here you add the addresses you want the user should be redirected to. This will be all up to you, who you want to redirect or not. If you want multiple addresses on hub full for an example. then separate with a pipe. on.hub.full1:411|on.hub.full2:411| and so on then the users will be sent to random addresses. But you don´t need to type in a address, you can write what ever you want. On banned example. We don't want you in here.Your ass is banned in this hub so fu** off. To the top

Step 5 - Notifications

http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 4 of 22

YnHub Guide

2013-04-22 1:35 PM

These settings will send a feed message to a chat-room you have chosen. It will be explained further down. 1. Protocol notifications (before kicking) Notify invalid key (if kicking) Notify invalid MyINFO Notify invalid private message Notify invalid mainchat message Notify invalid search result (SR) Notify incorrect IP in connection attempt Notify invalid passive connection attempt Notify incorrect characters in nick

2. Spam notifications Notify on MyINFO spam Notify on search spam Notify on mainchat spam. Notify on private message spam Notify on nicklist spam Notify on junk data spam http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 5 of 22

YnHub Guide

2013-04-22 1:35 PM

3. Other notifications Suppress client kick message in mainchat Notify operators on kick in mainchat Notify operators on ban in mainchat

4. Feed Use the feed command if supported Save feed to disk Feed name when sent to a chatroom

Type any name you want

5. Miscellaneous Notify incorrect pass after x times

To the top

Step 6 - Text command

http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 6 of 22

YnHub Guide

2013-04-22 1:35 PM

You can leave this step if you like. and go to the text command on this page instead.

1. Here you will se all of your added text commands 2. Here you are abel to choose edit level, receive level, access level. who you want the command to be broadcast to, and so on. 3. Here you set a name for your command. It´s the name that triggers the text in the hub. +trigger 4. Here you type what ever should be in the command. To the top

Step 7 - Security

http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 7 of 22

YnHub Guide

2013-04-22 1:35 PM

1. General security - Mark these options

Kick user if key is invalid Check sender IP on Search and connectToMe Perform DNS lookup Check data before lock 2. Maintenance & Timeouts - Mark all these options and leave the time value as it is.

Handshake timouts Drop non responding Temporary ban on kick 3. Share trace - Mark all these options and leave the time value as it is.

Enable share trace Notify on share update Autoprune

4. Auto bans - Mark all these options and leave the time value as it is.

Ban on kick no Ban on incorrect pass no

http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 8 of 22

YnHub Guide

2013-04-22 1:35 PM

5. Spam control - mark all these options and leave the time values as they are.

New MyINFOs

Make this one "grayed " Make this one "grayed "

Searching Mainchat

Not grayed

Private messages

Make this one "grayed "

Nicklist

Make this one "grayed "

Junk data Not "grayed" Junk data direct Not "grayed" kick Max spam warnings You click twice in the box to make the box grayed. To the top

Step 8 - Restrictions

1. Length restrictions mark all these options and leave the values as they are Nick max length Search max length MyINFO max length http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 9 of 22

YnHub Guide

2013-04-22 1:35 PM

Mainchat length Private message max length

2.

Allowed nick characters

Here you select what chars you will let your users to have in their nicks. so just mark the box on which characters you will allow in the hub. But you can leave this option as it is for now. 3. Passive search restrictions- mark all these options an Max search replies Max length any file type Min length specific file type d leave the values as they are.

4.MyINFO distribution - mark all these option and make all these options grayed Here we can gain some bandwidth, if ban with is your limitation. Pool MyINFO changes for Disable description Disable description tag Disable email Disable connection speed information

http://www.jsdator.se/YnHub/sidor/Setup.htm

If it´s grayed only the OP´s will se this If it´s grayed only the OP´s will se this If it´s grayed only the OP´s will se this If it´s grayed only the OP´s will se this

Page 10 of 22

YnHub Guide

2013-04-22 1:35 PM

To the top

Step 9 - Miscellaneous

1. Hub command visibility - mark all these options and set the drop-down menu to nobody Force reply to PM Integrated command visibility

2. Integrated command visibility - Mark this option and set the drop-down menu to operators. Force reply to PM 3. General searching - mark this option and leave the search value as it is. Maxhits on hub integrated commands searches

Autosend own userIP on login http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 11 of 22

YnHub Guide

2013-04-22 1:35 PM

To the top

Step 10 - Chat-rooms

Mark every chatroom and change the welcome message if you like.and only have the show feed box marked on the OP-chat 1. Here you will see all you different chat-rooms 2. No need to change anything here, but you can type in a welcome message if you like. 3. No need to change anything here either. Show chatroom as operator Show feed message Just have this option marked for the OP-chat To the top

Step 11 - Hublist

http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 12 of 22

YnHub Guide

2013-04-22 1:35 PM

1. Here you will se all available hublists you can get registered at. 2. Enable hublist registration 3. Use this hublist registration server Fix for dreamland: select the old dreamland hub reg. Name Description Host DNS/IP change the old address to dreamland.gotdns.org Port Allow pinger to connect to other users Use a nick/nick patterns for hublist pinger Use a IP/IP pattern for hublist change the IP of the pinger to 213.226.67.113 pinger Use host DNS to update pinger IP Then press the "save" button Fix for hublist.org: http://www.jsdator.se/YnHub/sidor/Setup.htm

You have to make a new one Page 13 of 22

YnHub Guide

2013-04-22 1:35 PM

Name Description Host DNS/IP Port Allow pinger to connect to other users Use a nick/nick patterns for hublist pinger

Hublist.org

Use a IP/IP pattern for hublist pinger

80.222.*;80.223.*;82.141.*;82.208.4.112;193.6.50.47; 212.50.*;213.112.*;213.113.*;213.114.*;213.115.*

reg.hublist.org 2501

{HublistPinger}

Use host DNS to update pinger IP Then press the "save as" button To the top

Step 12 - User stats

1. Here you are abel to choose how you should store your user stats , you have to enable this feature or you wont be abel to use the !ui in the hub. Type Prune 2. MySQL http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 14 of 22

YnHub Guide

2013-04-22 1:35 PM

No need to change anything unless you have MySQL on your computer, this has it ´s advantages. When you reboot the hub you wont lose your user stats as you would if you stored it locally. To the top

Step 13 - Users

1. Default connection restriction Mark this if you want a private hub . mark this, If you want your users Enable register (allows users to register their to register themselves (+regme nicks) +unregme) Enable ISP/IP check Allow IP's not found in ISP list Use case sensitive prefix validation Required prefix Min share size Min slots Max slots Require an account or register (reg only)

Max share size Max hubs Slot ratio Allow "tag-less" clients to bypass hub/slot restrictions May connect using passive mode http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 15 of 22

YnHub Guide

2013-04-22 1:35 PM

2. Default password Required password: To the top

Step 14 - Profiles

1. Here you will see all of your different accounts. 2. Here you choose what level and what the account should be named. 3. Here you choose what the different accounts can do. I will go through everyone here and we shall concentrate on the owner, OP and VIP accounts. 3.1 Profile settings May use hub commands Is operator May see hidden users My hide self Can enter even if hub is full Force hide share May hide share Connection restrictions Set min share Set max share http://www.jsdator.se/YnHub/sidor/Setup.htm

Owner

OP

VIP

Page 16 of 22

YnHub Guide

2013-04-22 1:35 PM

Set min slots Set max slots Set slotratio Hub control Save settings Change userlimit Set Topic Redirect all Set Workpace Lock hub Lock mainchat Information Hub info Userinfo IP info Nick info Traffic info Traffic stats 3.2 Accounts Add account Remove account List account Set profile Set required IP/IP range Show required IP/IP range Set comment Set expire date Set owner Set password Show password Show profiles User control Block user Redirect user Drop user Kick user Ban nick Ban IP/IP range http://www.jsdator.se/YnHub/sidor/Setup.htm

Owner

OP

VIP

Page 17 of 22

YnHub Guide

2013-04-22 1:35 PM

Ban DNS Ban client Tempban Mute user Luarize user Kennylize user 3.3 ISPs Add ISP Remove ISP List ISP Set min share Set max share Set max hubs Set min slots Set max slots Set slotratio IP on ISP's Add IP to ISP remove IP from ISP Show IP's on ISP

Owner

OP

VIP

3.4 Redirects Hub full Incorrect ISP/IP Low share High share Reg. only Passive No tag High hubs Low slots High slots Low slot ratio Banned Miscellaneous Admin chat rooms Admin text files Admin registered Use say command

Owner

OP

VIP

http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 18 of 22

YnHub Guide

2013-04-22 1:35 PM

Use MC command Use warn command Use inform Use PM command Use OPM command 3.5 Privileges ( overrides ) Flood check PM length limit check Mainchat length limit check IP check on search/connect Nick check in PM/MC Bypass ISP/IP check Override default/ISP tag restrictions Nickban IP/IP range ban DNS ban Client ban Tempban Min share

Owner

OP

VIP

Owner

OP

VIP

Min slots Max slots Max sharesize Max hubs Slot ratio Allow"tag-less" clients to bypass hub/slot restrictions May connect using passive mode 3.5 Protocol access Search in active mode Search in passive mode Send mainchat http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 19 of 22

YnHub Guide

2013-04-22 1:35 PM

messages Send private messages Connect in active mode Connect in passive mode Feature access May access UserIP May access UserIP2 May access MCTo Master overrides Cannot be kicked Cannot be dropped Cannot be redirected Feed Receive feed Receive action feed Receive kick feed Receive event feed Receive GUI feed Receive error feed 3.6 Owner OP VIP Enable join announcement In the content box you can type what ever you want. Example: Here is the almighty his profile level is: Or just leave it empty if you don´t want it to announce when someone gets into the hub. To the top

Step 15 - Accounts

http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 20 of 22

YnHub Guide

2013-04-22 1:35 PM

1. Here you will see all your added accounts Lets se if we can add an account for you here. 2. Type a nick you want. example [OP]kalle , then choose a password you want. 3. On profile you choose Owner and let the owner box stay as it is. In IP patter you can choose your Internal IP if you like, then nobody then you can enter on that account. but you wont be abel to enter from a different machine if you are at a friend and so on. So if you don´t want that leave it blank. The comment field you can leave blank to. The greeting box will send a private message to you when you log into the hub. Only you will be abel to se it. Then hit the save as button. To the top

Step 16 - Registered

http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 21 of 22

YnHub Guide

2013-04-22 1:35 PM

1. Enable register. Let your user to reg them self in the hub. The command is +regme and +unregme 2. Here you can search among the self registered users. If you type an asterix * then it will list all registered users, or just search on nick. 3. Here your registered users should be listed when you do a search To the top

Well this should be it, now you should have a working hub. try and log in on the hub by connecting to you local IP. 127.0.0.1:411 if you haven't changed the port number in settings, with your chosen nick and password. All you have to do now is to open up the port you did choose in settings on your router, firewall. Howe do i do that? well look in your manual for your router/firewall, but here is a good page you can look at if you have a router. http://portforward.com/routers.htm. To check so you have forwarded the right port in your router/firewall go to this page and test it. http://www.canyouseeme.org/

The End

http://www.jsdator.se/YnHub/sidor/Setup.htm

Page 22 of 22