Wiring Harness Color Codes for Pioneer KEH Cassete Receiver

What are the wiring harness color codes for DEH, DEHP, KEH, KEHP car stereos (1999 models) and KE, DEH and KEH car stereos (models prior to 1999)? Description of the wiring harness color codes for DEH, DEHP, KEH, KEHP high power car stereos (1999 models); KE low power car stereos (prior to 1999), and DEH and KEH high power car stereos (prior to 1999) Before 1999 - Low Power Car Stereo KE models only: GREEN is the left front positive GREEN WITH RED STRIPE is the left rear positive GRAY is the right front positive GRAY WITH RED STRIPE is the right rear positive BLACK is the negative for all speakers RED is the switched power ORANGE is the constant power BLUE is the trigger for amp or power antenna YELLOW is to lighting switch terminal. Connect a ground wire from the center post on the back of the radio to chassis ground Before 1999 - High Power Car Stereos DEH & KEH models only: GREEN is the left front positive GREEN/BLACK is the negative GREEN/RED is the left rear positive BLACK/GREEN is the negative GRAY is the right front positive GRAY/BLACK is right front negative GRAY/RED is right rear positive BLACK/GRAY is the right rear negative RED is the Acc lead ORANGE is for memory BLACK is ground (-) BLUE is for power antenna YELLOW is to lighting switch terminal 1999 models - High Power Car Stereos DEH & DEHP , KEH & KEHP WHITE is the left front speaker positive WHITE/BLACK is the left front speaker negative GREEN is the left rear speaker positive GREEN/BLACK is the left rear speaker negative GREY is the right front speaker positive GREY/BLACK is the right front speaker negative VIOLET is the right rear speaker positive VIOLET/BLACK is the right rear speaker negative YELLOW is to terminal always supplied with power RED is to terminal controled by ignition switch BLACK is chassis ground BLUE/WHITE is to system control of power amp or power antenna ORANGE is to lighting switch terminal. DFS Alarm: WHITE is the door trigger - +/BROWN is the pulsed output - + (500ma max) DFS Alarm +: WHITE is the door trigger - +/- Input WHITE/ORANGE is the remote disarm - (+/-) Input BLUE/BROWN is the starter disable - (+) Output (500ma) WHITE/RED is the auxiliary trigger - (-) Input BROWN is the switchable pulse/constant output - (+) Output (500ma) Attachments: There are no attachments for this solution. What are the wiring harness color codes for model DEH, DEHP, KEH and KEHP car stereos (1999 or later model years)? Description of wiring harness color codes for model DEH, DEHP, KEH and KEHP car stereos (1999 or later model years) WHITE is the left front speaker positive WHITE/BLACK is the left front speaker negative GREEN is the left rear speaker positive GREEN/BLACK is the left rear speaker negative GREY is the right front speaker positive

GREY/BLACK is the right front speaker negative VIOLET is the right rear speaker positive VIOLET/BLACK is the right rear speaker negative YELLOW is the terminal always supplied with power RED is the terminal controlled by ignition switch BLACK is the chassis ground BLUE/WHITE is the system control of power amp or power antenna ORANGE is the lighting switch terminal. DFS Alarm: WHITE is the door trigger - +/BROWN is the pulsed output - + (500ma max) DFS Alarm +: WHITE is the door trigger - +/- Input WHITE/ORANGE is the remote disarm - (+/-) Input BLUE/BROWN is the starter disable - (+) Output (500ma.) WHITE/RED is the auxiliary trigger - (-) Input BROWN is the switchable pulse/constant output - (+) Output (500ma.) Attachments: There are no attachments for this solution.