Wire Ropes

SeaLinkers Pvt. Ltd.

SeaLinkers Pvt. Ltd.

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

Rope Clamping

Wire Ropes Wire Rope Components ! Wire

Authorised Distributor

! Strand ! Core

The RIGHT WAY to clip wire rope

Fundamental Constructions

usha martin Cross Lay

WIRE ROPE Strand Painting

Spray Nozzle

Wires

Equal Lay

As Manufactured + In-service Lube

The WRONG WAY to clip wire rope

Single Layer

140%

Note: Improper fixing of clamps may lead to safety hazards. For proper clamping standards, refer applicable standards or OEM recommendations.

! Single wire centre with six wires of the same diameter

As Manufactured 100%

King Wire

Seale Single Layer

Life Enhancement

! All wires in each layer are of the

In-Use Lubrication ! Usha Martin ropes are supplied with a special

In-use lubrication pays rich dividends

lubricant ! Periodic lubrication during usage is necessary to derive enhanced performance

Storage

same diameter.

! Large outer wires rest in the valley between the small inner wires

Rope Size

! Must be stored in a well ventilated shed. ! Free from moisture, dust and fumes. ! Suitable lubricant to be applied very 3 months to the

Measure the circle just touching the extreme outer limits (crown) of the strands.

Seale

of wires as the outer layer.

! Small filler wires, equal in number

outer layers.

to the inner layer, are laid in the valleys of the inner layer. between the small inner wires

after every 3 months. ! Protect wooden reels from the attack of termites. ! In no case the reels should b put on ground or uncemented floor.

Dripping

Filler Wire ! Inner layer having half the number

! Reel containing ropes to be rolled through 90 degree

Continuous Bath

! Equal number of wires in each layer.

Core

Filler Wire

Warrington ! One diameter of wire in the inner layer

! Two diameters of wire alternating Cover Shed

Correct

large and small in the outer layer Warrington

! The large outer layer wire rest in the valleys and the smaller ones on the crowns of the inner layer

Combined ! Combination of above constructions. Eg Seale-Filler, WarringtonSeale etc.

Incorrect

Pouring

Ground Clearance

Swabbing 4

Method of Measuring Rope Diameter

Combined 1

WIRE ROPES

Wire Ropes

SeaLinkers Pvt. Ltd.

SeaLinkers Pvt. Ltd.

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

Wire Ropes

Rope Dia (d)

LAY Direction of Wire & Strand Helix

FLEET ANGLE

Right Hand Lay (Use right hand)

Sheave Dia (D)

Pulley / Rope Bending Ratio (D/d Ratio)

Right Hand Regular Lay (RHRL/RHO/sZ)

L

Note The ratios are based on Max. rope speed of 60 meters/min. For each increase in 30 meters/min. in excess of 60 meters/min., add 5% to the drum diameter.

Angle of Fleet

α

Left Hand Lay (Use left hand) L

R

Underwind Right to Left

R

Underwind Left to Right

Left Hand Regular Lay (LHRL/LHO/zS) Sr. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Right Hand Langs Lay (RHLL/RHL/zZ)

Left Hand Langs Lay (LHLL/LHL/sS)

Alternate Lay (Combination of Langs & Regular)

Special Alternate Lay (2 Langs 1 Regular)

Ideal Pulley Groove Greater contact area between the rope and the pulley reduces abrasion and enhances service life.

Wrong

Wrong

Right

Sheave groove too wide

Sheave groove too narrow

Sheave groove of correct size

2

Construction

D:d Ratio

6x7 (6-1) 6x19S (9-9-1) 6x26SW (10-5+5-5-1) 6x25F (12-6F-6-1) 6x31SW (12-6+6-6-1) 6x37SF (12-12-6F-6-1) 6x36SW (14-7+7-7-1) 6x43SF (14-14-7F-7-1) 6x50SFS (14-14-7F-7-7-1) 6x41SW (16-8+8-8-1) 6x49SW (16-8+8-8-8-1) 6x49SF (16+16+8F-8-1) 6x46SW (18-9+9-9-1) 6x52SW (18-9+9-9/6-1) 6x55SF (18-18-9F-9/6-1) 8x19S (9-9-1) 8x26SW (10-5+5-5-1) 8x25F (12-6F-6-1) 8x31SW (12-6+6-6-1) 8x37F (12-12-6F-6-1) 8x36SW (14-7+7-7-1) 8x50SFS (14-14-7F-7-7-1) 17x7 (11:16-1) 18x7 (12:6-FC) 19x7 (12:6-1) 34x7 (17:11/6-FC) 35x7 (16:6+6-6-1) 6x25FS (12/12/∆) 6x8FS (7/∆) 6x28FS (15/12/∆) Locked Coil Winding Rope

64 48 45 39 39 39 33 33 33 30 30 30 27 27 27 39 36 33 33 33 29 29 52 52 52 45 61 48 73 45 152

42 42 30 26 26 26 22 22 22 20 20 20 18 18 18 26 24 22 22 22 19 19 34 34 34 30 40 32 48 30 100

Rope Cutting Procedure

Centre Line of Reel

Recommended Minimum

2. Twisting 1. Seizing Centre Line of Sheave

Note: Recommended angle Grooved drum: α ≤ 2.5° Flat drum: 0.5° ≤ α ≤ 1.5°

3. Cutting

Spooling / Anchorage of Rope on Drum ! Ropes are supplied with zero internal torque ! Improper spooling induces torque in rope, reducing rope life

Right Hand Lay (Use right hand) L

R

Overwind Left to Right

Left Hand Lay (Use left hand) L

Note: Seizing wire recommendation - for ungalvanised rope - use annealed wire - for galvanised rope - use soft, zinc-coated wire. - Diameter of wire: 8 - 24 mm = 1 mm 25 - 36 mm= 1.6 mm 38 - 56 mm = 2 mm - Recommended sizing length. = 1xdmin or 10 wraps

R

Overwind Right to Left

3

WIRE ROPES

Wire Ropes

SeaLinkers Pvt. Ltd.

SeaLinkers Pvt. Ltd.

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

Wire Ropes

Wire Ropes WIRE ROPES

Handling - The right way ! Use spindle through the reels for loading / unloading

TYPES OF TYPICAL FAILURE

TERMINATION FAILURE

!

SHOCK LOADING

! ! !

or put the rope on a swift with brake arrangement. Allow clearance for free rotation of reel when the rope end is pulled. Maintain constant tension during haul off. Prevent crossing of rope laps on the reel. Avoid possible kink, which is a permanent damage to a rope.

ABRASION

Wire Rope Characteristics BEND FATIGUE AND ABRASION RESISTANCE FATIGUE FAILURE

Rope resistance to bending

THERMAL DAMAGE

Rope resistance to bending

6x7

6 9

CORROSION

LE

AS T

10

BIRD CAGE

RE

SIS

12 12

TA NC ET OB

ION AS R AB

EN

12 14

RE

16 18

ST TE A E GR

L

ST EA

SIS

TO CE N TA

DIN G

FAT IGU

6x19S 6x21F FLATTENED STRAND 6 25FW

E

6x31WS

GR EA TE S

6x36WS

T

6x49WS 6x61WS

! More wires - better fatigue resistance ! Less wires -better abrasion resistance

Authorised Distributor

usha martin 8

5

SeaLinkers Pvt. Ltd.

SeaLinkers Pvt. Ltd.

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

COMPACTED ROPES CHARACTERISTICS SIMPLY STATED

! More wires in the outer strand (14 for 36WS) will

! Increased breaking force ! Increased performance ! Improved characteristics 8 Improved wear resistance 8 Improved crushing resistance 8 Improved Bend Fatigue resistance

improve bend fatigue ! Less wires in the outer strands (9 for 19S) improve wear/abrasion resistance characteristics ! Steel core (IWRC) resists drum crushing better than fibre core ! Langs lay resists interference at drum better than ordinary lay

2.54 mm

6 x 19S

9 outer wires

2.11 mm

6 x 25F

12 outer wires

1.70 mm

6 x 36

14 outer wires

1.49 mm

6 x 41

16 outer wires

1.34 mm

! Full Plastic impregnation ! Reduces wire contact stress & interstrand nicking ! Retains lubrication inside & does not require in-

200000 146000

150000

service lubrication

70000

100000

! Prevents ingress of solid abrasives & reduces internal corrosion

50000

! Provides greater and better wear & abrasion

0

Hyflex 6

Powerform 6

resistance ! Minimizes bend stress over sheaves and increases fatigue life ! Ideally suitable for mining application

PLASTICATED ROPE CHARACTERISTICS SIMPLY STATED (Cushion Core - Compacted outer strands)

Comparison of outer wire sizes for 25 mm diameter rope as illustration 6 outer wires

PLASTICATED ROPE CHARACTERISTICS SIMPLY STATED (plastic Valley Filled)

20 mm Hyflex (conventional) versus 20mm Powerform 6 1960 N/mm2

High breaking load per unit area

Abrasion Resistance

6x7

Greater bend fatigue resistance

Cycles to failure

COMMONLY USED ROPE (NON-COMPACTED) CHARACTERISTICS SIMPLY STATED.

Wire Ropes

Compacted rope minimum breaking force

Conventional rope minimum breaking force

20 mm Hyflex (conventional) versus 20mm Powerform 6 1960 N/mm2 375

COMPARISON OF ROTATION RESISTANCE

335 kN

! ! ! !

Plastic impregnation of core (IWRC) Greater resistance to drum crushing Increases abrasion resistance Smoother exteriors and greater surface area resulting in reduced sheave wear ! Reduced IWRC and outer-strand nicking & crosscutting ! High fatigue life

Impregnation of IWRC

279 kN

300

Typical Example

225 150

Impregnation of IWRC

75

Conventional

Compacted

Line Contact

Surface Contact

Parallel closed ropes (eg. Powerform 8PC)

High Crushing Resistance

6/8 strand ropes (eg. Hyflex 6)

Turn

Low rotation ropes (eg. Hyflex 18) Rotation resistant ropes (eg. Powerform 35)

0

Fatigue Life

External Contacts

200

At cross-over points due to high fill factor

6

At lower layers in multilayer operation

Normal Rope

150 0

100 50

PVF

Compacted Non Compacted (6/8 outer strands)

Authorised Distributor

0

Load

Compacted Rope

175%

100%

Hyflex 6 x 19

20% x MBL

Hyflex 6 x 29Fi

15% x MBL

Rope Failure Discard Level

Hyflex 6 x 36

0 Rope Tension

250

Internal Contacts

Plastic Valley Filled (Compacted strands)

250%

Comparison of bend fatigue illustration

High Abrasion Resistance

Hyflex & powerform 35

Typical Example

Hyflex 8P

Hyflex & powerform 18

Powerform 6

Powerform 8P

8 x 19 Class

Comparison of service life (mining application) Hyflex 6

Powerform 6

0

Cycles to failure (000’s)

Rotation (deg/m)

6 x 19 Class

usha martin

Our suffix is ‘P’ Colour of plastication is indicated in blue

7

WIRE ROPES

Wire Ropes

SeaLinkers Pvt. Ltd.

SeaLinkers Pvt. Ltd.

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

Wire Ropes GENERAL ENGINEERING Construction

SHIPPING Construction

Page Ref.

6x7&7x7 6 x 19M 6 x 19F 6 x 19S 6 x 29F 6 x 36SW 6 x 37M

6 x 37 6 x 24

CRANE Construction

Page Ref.

ELEVATOR Page Ref.

Construction

Powerform 35/35P Hyflex 35/35P Powerform 18 Hyflex 18 Powerform 6/6P Powerform 8/8P Hyflex 8/8P Powerform 8PC Hyflex 4 Hyflex 6 x 36 Hyflex 6 x 19 Hyflex 6 x 29F

Page Ref.

6 x 19F (CFN) 8 x 19S (CFN) 8 x 19S + IWRC (8 x 7 + CF) Governor Rope

OIL FIELD Construction

Page Ref.

TITAN Anchor Mooring75 TITAN Drilling Lines79 TITAN Riser Tensioner96 35 x 7 for cranes

Authorised Distributor

usha martin

DISCARD CRITERIA

RECOMMENDED DO'S & DON'TS

! For single-layer construction, if the reduction in diameter is greater than 8% (eg. 6x7). ! For multiplayer construction, if the reduction in diameter is greater than 5% (eg. 6x19, 6x36 etc.) ! Total no. of visible broken wires exceed 10% of total no. of wires in the rope, in a length of 8 x dia. of rope or 3 or more adjacent broken wires in a stand. ! Evidence of considerable plastic wear or surface embrittlement. ! Localised distortion, damage or kink, bird-caging, crushing. ! Localised diameter reduction or lay variation associated with waviness. ! Collapsed core or one strand broken coupled with wire looseness and bulging. ! Corrosion / chain pitting & associated fatigue of wires. ! Damage due to heat / fire. ! Rope has been subjected to severe shock load or overload due to some accident with equipments. ! End-fitting / attachments damaged or cracked or deformed or worn out.

DO’S ! Lubricate ropes with good quality acid free and moisture free lubricant. ! Regularly inspect the sheaves, rollers or pulleys-the life of a rope largely depends on their conditions. ! Inspect ropes and fittings/terminations periodically. DONT’S ! Do not allow ropes in store to deteriorate ! Do not mishandle ropes when uncoiling or unreeling & allow kinks to form. ! Do not use Langs lay with a swivel ! Do not cut a rope without seizing. ! Do not use rope which is not sufficiently flexible for he size of drum or pulley. ! Do not load the rope beyond its safe working load. Reduction of safety factor may jeopardise not only rope, but also equipment, job and men. Note: Remember - Care in handling, installation, and careful inspection gives more life and enormous dividends.

Note: The inspector should also refer to International Standards like ISO 4309 and BS 6570 or any other relevant standard for the purpose, as a tool, for discarding a wire rope. Authorised Distributor

usha martin 12

9

WIRE ROPES

APPLICATION

Wire Ropes

SeaLinkers Pvt. Ltd.

SeaLinkers Pvt. Ltd.

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

Wire Ropes WIRE ROPES

Wire Ropes

10

HYLEX 4 (Fibre Core) Page # 13

SHIPPING ROPE 6x24 (15/9)Fibre)Page # 13

SHIPPING ROPE 6x37 (18/12/6/1)Page # 13

ROUND STRAND (Fibre Core) 6/19S (9-9-1)Page # 14

ROUND STRAND (Steel Core) 6/19S (9-9-1)Page # 14

ROUND STRAND (Fibre Core) 6/19F (12-6F+6-1)Page # 15

ROUND STRAND (Steel Core) 6/19F (12-6F+6-1)Page #15

ROUND STRAND (Fibre Core) 6/36SW (14-7+7-7-1)Page #16

ROUND STRAND (Steel Core) 6/36SW (14-7+7-7-1)Page # 16

TITAN DRILLING LINES 6x9 class rope with CWR (IWRC) (Bright)Page #17

HOIST & COMPENSATING ROPE 8x19S (9-9-1)Page #17

GOVERNOR ROPES 6/25F (12-6+6F-1) Page # 17

HYFLEX 6 x 19 Page # 18

HYFLEX 6 x 36 Page # 18

HYFLEX 18 Page # 19

HYFLEX 35 Page # 19

HYFLEX 35P Page # 19

HYFLEX 8 Page # 20

HYFLEX 8P Page #20

POWERFORM® 8PC Page # 20

POWERFORM 6/6P Page # 21

POWERFORM 8/8P Page # 21

POWERFORM 18 Page # 22

POWERFORM 35 Page # 22

POWERFORM 35P Page # 22

11

SeaLinkers Pvt. Ltd.

SeaLinkers Pvt. Ltd.

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

Wire Ropes SHIPPING ROPE 6X24 (15/9/Fibre) NOM. ROPE DIA. mm

ROUND STRAND (Fibre Core) 6/36SW (14-7+7-7-1) NOM. ROPE DIA.

ROUND STRAND (Steel Core) 6/36SW (14-7+7-7-1) NOM. ROPE DIA.

APPROX. MINIMUM BREAKING FORCE MASS Kg/100m 1570N/mm2 1770N/mm2 1960N/mm2

mm

Fibre Core

8 9 10 11 12 13 14 16 18 20 22 24 25 28 32 36 38 40 44 46 48 52 56 60 64

24 31 38 46 55 64 75 97 123 152 184 219 238 298 389 493 549 608 736 804 876 1030 1190 1369 1557

kN

33 42 52 63 75 88 101 133 168 203 250 298 325 405 530 670 748 828 1000 1100 1190 1400 1620 1865 2121

kN

37 47 58 70 84 98 114 149 189 234 282 336 363 458 598 757 843 934 1130 1227 1350 1580 1830 2102 2392

kN

mm

41 53 65 79 93 110 127 166 209 259 313 372 406 507 662 838 934 1035 1252 1375 1490 1748 2028 2328 2648

8 9 10 11 12 13 14 16 18 19 20 22 24 25 28 32 36 38 40 44 46 48 52 56 58 60 76 80

Note: All intermediate sizes also available.

APPROX. MASS Kg/100m

27 34 42 51 60 71 82 107 135 153 167 202 241 262 328 428 542 604 669 810 885 964 1130 1310 1405 1506 2415 2675

HYFLEX 4 (Fibre Core)

MINIMUM BREAKING FORCE

2 2 1570 N/mm2 1770 N/mm 1960 N/mm kN kN kN STEEL CORE

36 45 56 68 81 95 109 143 181 192 221 271 322 349 438 571 724 808 894 1080 1184 1290 1510 1750 1877 2014 3231 3580

41 52 63 76 90 107 124 161 204 216 252 304 363 394 493 644 816 911 1009 1220 1334 1450 1710 1980 2124 2270 3643 4036

45 57 70 85 101 118 137 179 226 240 279 338 402 436 548 715 905 1008 1117 1352 1478 1609 1888 2190 2349 2514 4034 4469

8 9 10 11 12 14 16 18 20 22 24 26 28 32 36 40

NOM. ROPE DIA.

NOM. ROPE DIA.

APPROX. MASS Kg/100m

mm

in

10 12 14 16 18 19 20 22

5/8 3/4

7/8 24 25 1 26 28 30 32 34 36 38 40 42 44 45

1.1/4

1.1/2

MINIMUM BREAKING FORCE 1770N/mm2

1960N/mm2

FIBRE CORE

kN

kN

45 65 89 117 149 167 183 214 218 253 275 284 298 346 398 456 512 574 640 709 782 859 898

64 92 126 165 208 232 257 310 317 369 399 413 433 502 576 656 740 830 924 1002 1102 1212 1272

69 100 137 177 225 251 278 336 343 400 432 448 469 544 624 689 802 898 1002 1082 1192 1312 1372

20 26 32 39 46 62 82 103 127 154 183 215 250 326 413 509

25 32 40 48 57 78 102 129 159 193 229 269 312 407 516 637

28 36 44 53 63 86 113 143 176 213 253 297 345 450 570 704

SHIPPING ROPE 6x37M (18/12/6/1) NOM. ROPE DIA. mm

12 14 16 18 20 22 24 26 28 32 36 40 44 48 52 56

Note: Rope sizes and breaking force not shown in standard table, may be available on request

Note: ! All intermediate sizes also available. ! The following construction holds good for the above chart: 6x41/6x47/6x43/6x49/6x52 SW - 38-90mm & 6x61SW - 57-125mm

16

APPROX. MINIMUM BREAKING FORCE MASS Kg/100m 1420N/mm2 1570N/mm2 Fibre Core kN kN

APPROX. MINIMUM BREAKING FORCE MASS Kg/100m 1420N/mm2 1570N/mm2 Fibre Core kN kN

50 68 89 112 138 167 199 234 271 354 448 554 670 797 936 1085

60 82 107 136 167 203 241 283 328 429 543 670 810 964 1132 1313

67 91 118 150 185 224 267 313 363 474 600 741 896 1066 1252 1451

Note: All intermediate sizes also available and all the above ropes are galvanised.

13

WIRE ROPES

Wire Ropes

SeaLinkers Pvt. Ltd.

SeaLinkers Pvt. Ltd.

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

Wire Ropes WIRE ROPES

Wire Ropes

ROUND STRAND (Steel Core) 6/19S (9-9-1)

ROUND STRAND (Fibre Core ) 6/19S (9-9-1) NOM. ROPE DIA. mm

6 8 10 12 13 14 16 18 19 20 22 24 25 26 28 30 32 34 36 38 40 42 44 46 48 50 51

APPROX. MASS

1570 N/mm2 Kg/100m kN

13 24 37 54 63 73 95 121 135 149 180 215 233 252 292 335 382 431 483 538 596 657 721 788 858 932 970

1770 N/mm2

1960 N/mm2

NOM. ROPE DIA.

kN

kN

mm

1570 N/mm2 Kg/100m kN

42 65 93 110 127 166 210 234 260 314 374 406 439 509 584 664 750 841 937 1038 1144 1256 1373 1495 1622 1688

6 8 10 12 13 14 16 18 19 20 22 24 25 26 28 30 32 34 36 38 40 42 44 46 48 50 51

15 26 41 59 69 80 105 133 149 164 198 237 256 277 321 368 420 474 531 592 656 721 792 865 942 1022 1064

MINIMUM BREAKING FORCE

33 52 75 88 102 133 168 188 208 252 299 325 351 407 468 532 600 673 750 831 917 1006 1099 1197 1299 1351

21 38 59 84 99 115 150 190 211 234 284 337 366 396 459 527 600 677 759 846 937 1033 1134 1240 1350 1465 1524

APPROX. MASS

ROUND STRAND (Fibre Core) 6/19F (12-6F+6-1)

1770 N/mm2

1960 N/mm2

NOM. ROPE DIA.

kN

kN

mm

MINIMUM BREAKING FORCE

36 56 81 95 110 144 182 203 224 272 323 350 379 440 505 575 648 727 810 898 990 1086 1187 1293 1403 1460

23 40 63 91 107 124 162 205 228 253 306 364 396 428 496 570 648 731 820 913 1012 1116 1225 1339 1458 1582 1646

45 70 101 118 137 179 227 253 280 339 403 438 474 549 630 717 810 908 1012 1121 1236 1356 1482 1614 1751 1822

8 10 12 13 14 16 18 19 20 22 24 26 28 32 34 36 38 40 44 46 48 52 58 60 64

1960N/mm2

NOM. ROPE DIA.

APPROX. MASS Kg/100m

kN

kN

mm

STEEL CORE

38 60 86 101 117 153 194 216 239 289 344 404 469 612 691 775 863 956 1157 1265 1377 1616 2011 2152 2448

42 66 95 112 130 169 214 239 265 320 381 447 519 678 765 858 956 1059 1281 1401 1525 1790 2227 2383 2711

8 10 12 13 14 16 18 19 20 22 24 26 28 32 34 36 38 40 44 46 48 52 58 60 64

APPROX. MASS Kg/100m

1570N/mm2

1770N/mm2

FIBRE CORE

kN

34 53 76 90 104 136 172 191 212 257 305 358 416 543 613 687 766 848 1026 1122 1222 1434 1784 1909 2172

24 38 55 64 75 97 123 137 152 184 219 257 298 389 439 493 549 608 736 804 876 1028 1279 1369 1557

ROUND STRAND (Steel Core) 6/19F (12-6F+6-1)

MINIMUM BREAKING FORCE

Note: All intermediate sizes also available.

14

1570N/mm2 1770N/mm2

15

1960N/mm2

kN

kN

kN

37 57 82 97 112 147 186 206 229 277 330 387 449 586 662 742 827 916 1110 1212 1319 1448 1927 2061 2345

41 65 93 109 127 165 209 233 258 312 372 436 506 661 746 837 932 1030 1250 1366 1487 1745 2172 2324 2644

46 71 103 121 140 183 232 258 286 346 412 483 560 732 826 926 1032 1144 1384 1513 1647 1933 2403 2573 2928

Note: All intermediate sizes also available.

Note: All intermediate sizes also available.

Note: All intermediate sizes also available.

27 42 60 71 82 107 135 151 167 202 241 283 328 428 484 542 604 669 810 885 964 1131 1407 1506 1714

MINIMUM BREAKING FORCE

SeaLinkers Pvt. Ltd.

SeaLinkers Pvt. Ltd.

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

Wire Ropes

Wire Ropes

NOM. ROPE DIA.

APPROX. MASS Kg/100m

mm

NOM. ROPE DIA. mm

NOM. ROPE DIA. in

1/2 5/8 3/4 7/8 24 1 26 28 1-1/8 30 32 36 38 42 44

1-1/4 1-1/2

1-3/4 48 50 2 52

MINIMUM BREAKING FORCE 1960N/mm2

Kg/100m

10 12 14 16 18 19 22

APPROX. MASS

44 63 70 85 111 141 157 211 215 251 281 297 345 359 396 451 570 635 785 862 879 1025 1113 1148 1203

TITAN DRILLING LINES 6x19 class rope with CWR (IWRC) (Bright)

POWERFORM 8PC

HYFLEX 8/8P

kN

73 105 123 143 187 239 269 356 360 423 470 500 572 596 656 747 935 1043 1305 1412 1441 1680 1833 1882 1972

2160N/mm2 kN

81 117 131 160 208 267 300 400 402 475 525 562 642 665 733 836 1053 1172 1462 1577 1613 1885 2065 2101 2202

NOM. ROPE DIA.

NOM. ROPE DIA.

APPROX. MASS

mm

in

Kg/100m

8 9 10 11 12 1/2 13 14 15 16 17 18 19 20 22

5/8

3/4

7/8 24 1 26 28

32 40 50 60 71 80 84 97 111 127 143 160 179 198 240 245 285 319 335 388

MINIMUM BREAKING FORCE

NOM. ROPE DIA.

NOM. ROPE DIA.

APPROX. MASS

2160N/mm2

in

mm

Kg/100m

kN

kN

3/4 7/8 1.0 1-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 1-7/8 2.0

19 22 26 29 32 35 38 42 45 48 52

155 211 275 348 430 521 619 726 844 967 1100

67 84 103 121 150 164 172 197 232 260 292 326 371 408 487 497 574 646 677 801

Note: ! ‘PC’ signifies Parallel Closed rope. ! Rope sizes and breaking force not shown in standard table, may be available on request and prior confirmation.

MINIMUM BREAKING FORCE EIPS

1960N/mm2

61 77 95 112 138 152 159 181 213 239 269 300 341 375 448 457 527 592 620 735

8 9 9.5 10 11 12 12.7 13 14 16 18 20 22 24 25.4

kN

262 354 460 568 711 854 1010 1170 1360 1550 1760

288 389 506 636 782 943 1112 1300 1500 1710 1930

TYPICAL EXAMPLE Construction Class Rope Strand 6 x 19

6 x 19 S

EEIPS

kN

6 x 26 WS 10-5+5-5-1

3/4-2

19-52

3/4-2

19-52

1570 or 1370 / 1770N/mm2 kN

22 27 31 35 42 50 56 59 66 89 109 135 165 184 217

28 36 40 44 53 64 72 75 86 113 141 178 213 233 254

GOVERNOR ROPES 6/25 F (12-6F+6-1) NOM. ROPE DIA.

APPROX. MASS Kg/100m

mm

FIBRE CORE

6 7 8 10 12

13 18 22 35 50

MINIMUM BREAKING FORCE 1570N/mm2 1770N/mm2 1960N/mm2 kN

kN

kN

-

20 30 35 54 78

-

GOVERNOR ROPES 8/19 S (9-9-1)

Authorised Distributor

usha martin

Note: ! ‘P’ signifies full plastic impregnation of the steel core. ! HYFLEX 8P is available only for 16mm & above. Rope sizes and MBL not shown in standard table, may be available on request. ! Mass per unit lenght of HYFLEX 8P increaces by approx 3%

NOM. ROPE DIA.

APPROX. MASS Kg/100m

mm

FIBRE CORE

8 9.5 11 12.7 20

MINIMUM. BREAKING FORCE

Note: Measured rope diameter will be in the range of+2.5% to +5% of nominal rope diameter under no-load condition.

Nominal Rope Dia. mm in

9-9-1

WIRE ROPES

HOIST & COMPENSATING ROPE 8 x 19S (9-9-1)

17

22 31 42 56

MINIMUM BREAKING FORCE 1570N/mm2 1770N/mm2 1960N/mm2 kN

kN

kN

-

28 40 53 72

-

SeaLinkers Pvt. Ltd.

SeaLinkers Pvt. Ltd.

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

Wire Ropes WIRE ROPES

Wire Ropes

HYFLEX 18 HYFLEX 6x19 NOM. ROPE DIA.

NOM. ROPE DIA.

APPROX. MASS

mm

in

Kg/100m

6 8 10 12 1/2 13 14 16 18 20 22 24 26 28 32 36 40 44 48 52 56 60

5/8

7/8 15/16 1

1.1/4

1.7/8

14 26 40 57 64 67 78 102 129 159 193 197 229 257 269 312 408 516 637 771 917 1076 1248 1433

HYFLEX 6x36

MINIMUM BREAKING FORCE 1770N/mm2

1960N/mm2

kN

kN

23 40 63 91 102 107 124 161 204 252 305 311 363 407 426 494 645 817 1010 1220 1450 1700 1980 2270

HYFLEX 35/35P

25 45 70 101 113 118 137 179 226 279 338 345 402 450 472 547 715 904 1120 1350 1610 1890 2190 2510

NOM. ROPE DIA.

NOM. ROPE DIA.

APPROX. MASS

mm

in

Kg/100m

8 9 10 11 12 1/2 13 14 16 18 20 22 24 26 28 32 36 40 44 48 52 56 60

Note: Rope sizes and breaking force not shown in standard table, may be available on request

5/8

7/8 15/16 1

1.1/4

1.7/8

2.3/8

26 33 41 49 59 66 69 80 104 132 163 197 201 235 263 276 320 418 531 655 793 943 1111 1281 1471

MINIMUM BREAKING FORCE 1770N/mm2

1960N/mm2

kN

kN

40 51 63 76 91 102 107 124 161 204 252 305 311 363 407 426 494 645 817 1010 1220 1450 1700 1980 2270

45 57 70 84 101 113 118 137 179 226 279 338 345 402 450 472 547 715 904 1120 1350 1610 1890 2190 2510

NOM. ROPE DIA.

NOM. ROPE DIA.

APPROX. MASS

mm

in

Kg/100m

6 7 8 9 10 11 12 1/2 13 14 15 16 17 18

5/8

3/4 20 22 7/8

15 20 26 33 41 49 59 66 69 80 91 104 117 132 147 162 197 201

1960N/mm2

2160N/mm2

NOM. ROPE DIA.

kN

kN

mm

27 37 49 61 76 91 109 121 127 148 169 194 219 244 273 301 366 374

10 12

MINIMUM BREAKING FORCE

25 34 45 57 70 84 101 113 118 137 157 180 203 226 253 279 339 346

APPROX. MASS

in

Kg/100m

1/2 14 16 19 20 22

5/8 3/4

7/8 24 1 26 28 1-1/8 30 32 35 36 38 42 44

Note: Rope sizes and breaking force not shown in standard table, may be available on request

1-1/4 1-3/8 1-1/2

1-3/4

Authorised Distributor

48

usha martin

2 52

45 65 72 88 115 162 179 217 221 258 289 303 351 366 403 459 549 581 647 790 867 885 1032 1156 1211

MINIMUM BREAKING FORCE 1960N/mm2

2160N/mm2

kN

kN

76 107 123 148 194 277 301 370 376 441 491 517 599 621 679 769 945 983 1078 1227 1347 1375 1603 1796 1881

87 125 137 168 221 312 337 412 418 498 546 581 681 704 775 865 1044 1085 1205

Note: ! ‘P’ signifies full plastic impregnation of the steel core. ! HYFLEX 35P is available only for 16mm & above. ! Rope sizes and MBL not shown in standard table, may be available on request. ! Mass per unit length of HYFLEX 35P increases by approx 3%

Note: Rope sizes and breaking force not shown in standard table, may be available on request

18

NOM. ROPE DIA.

19

SeaLinkers Pvt. Ltd.

SeaLinkers Pvt. Ltd.

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

Wire Ropes HOW TO IDENTIFY USHA MARTIN ROPE

WIRE ROPES

SAFETY INFORMATION

Wire Ropes

W AR NI NG !

‚ Wire rope will fail if worn out, shock loaded, overloaded, misused, damaged, improperly maintained or abused. ‚ Always inspect wire rope for wear, damage or abuse before use. ‚ Never use a wire rope which is worn out, damaged, corroded or abused. ‚ Never overload or shock load a wire rope. ‚ Use the correct design factor for the application. ‚ Inform yourself : Read and understand the machinery manufactures handbook and guidance from the wire rope manufacturer. ‚ Refer to applicable directives, regulations, standards and codes concerning inspection, examination and rope removal criteria.

POWERFORM 6/6P NOM. ROPE DIA.

NOM. ROPE DIA.

APPROX. MASS Kg/100m

mm

in

FIBRE CORE

10 12 1/2

Note: All statements, technical information and recommendations contained herein are believed to be reliable, but no guarantee is given as to their accuracy and/or completeness. The user must determine the suitability of the product for his own particular purpose, either alone or in combination with other products and shall assume all risk and liability in connection therewith. Whilst every attempt has been made to ensure accuracy in the content of the tables, the information contained in this catalogue does not form any part a contract.

13 14 16 18 19 20 22

Every genuine Usha Martin rope has this identification tape inside

5/8 3/4

7/8 24 1

METRIC - IMPERIAL DIAMETER CONVERSION

CONVERSION TABLE

in.

mm.

in.

mm.

in.

mm.

Length

1m

5/32 3/16 1/32 1/4

3.97 4.76 5.56 6.35

15/16 1 1-1/16 1-1/8

23.8 25.4 27.0 28.6

2-1/2 2-3/4 3 3-1/4

63.5 69.9 76.2 82.6

Force

1kN

5/16 3/8 7/16

7.94 9.53 11.1

1-3/16 1-1/4 1-3/8

30.2 31.8 34.9

3-1/2 3-3/4 4

88.9 95.3 101.6

1/2

12.7

1-1/2

38.1

4-1/4

108.0

9/16 5/8 11/16

14.3 15.9 17.5

1-5/16 1-3/4 1-7/8

41.3 44.5 47.6

4-1/2 4-3/4 5

114.3 120.7 127.0

3/4 13/16 7/8

19.0 20.6 22.2

2 2-1/8 2-1/4

50.8 54.0 57.2

2

=1000 mm

=3,281 ft

=39,37 inch

=101,97kp

=0,10197 MT-f =224lbs-f

=0,10197 kp/mm2

=145,04 p.s.i. =10 bar

Tensile Strength

1N/mm

Cross Section

1mm2

Weight

1 metric t =1000 kg =1,102 short t =09,842 longt =2204,6 lbs

Weight per 1 kg/m Length Unit

=0,00155 in2

=0,672 lbs/ft

Authorised Distributor

usha martin 24

28 32 34 36 38 40 46 48 50 52 56 58 60

1-1/4

1-1/2

46 56 75 78 91 119 150 168 186 225 229 267 299 364 475 518 581 647 717 948 1032 1120 1211 1405 1507 1613

POWERFORM 8/8P

MINIMUM BREAKING FORCE 2

2

1770N/mm

1960N/mm

kN

kN

70 84 113 118 137 178 225 251 278 336 343 400 449 545 712 804 901 1004 1112 1362 1483 1609 1741 2019 2166 2317

86 99 140 147 170 218 276 304 335 400 408 489 552 657 846 916 1065 1165 1295 1665 1885 1975 2135 2475 2650 2810

NOM. ROPE DIA.

NOM. ROPE DIA.

APPROX. MASS

mm

in

Kg/100m

10 12 1/2 14 16 19 20 22

5/8 3/4

7/8 24 1 26 28 1-1/8 30 32 34 36 38 40 44

1-1/4

1-1/2

1-3/4 46 48 50 2 52

Note: ! ‘P’ signifies full plastic impregnation of the steel core. ! POWERFORM 6P is available only for 16mm & above. Rope sizes and MBL not shown in standard table, may be available on request. ! Mass per unit lenght of POWERFORM 6P increaces by approx 3%

46 66 74 90 118 166 184 223 227 265 297 318 368 384 423 481 543 609 679 752 929 948 1016 1103 1200 1239 1298

MINIMUM BREAKING FORCE 1960N/mm2

2160N/mm2

kN

kN

88 126 142 172 225 317 351 425 434 506 567 594 688 717 790 899 1013 1138 1268 1405 1700 1735 1858 2023 2200 2266 2374

94 135 152 184 241 339 376 455 464 541 606 635 737 767 846 960 1083 1218 1357 1503 1819 1856 1985 2162 2349 2425 2541

Note: ! ‘P’ signifies full plastic impregnation of the steel core. ! POWERFORM 6P is available only for 16mm & above. Rope sizes and MBL not shown in standard table, may be available on request. ! Mass per unit lenght of POWERFORM 6P increaces by approx 3%

21

SeaLinkers Pvt. Ltd.

SeaLinkers Pvt. Ltd.

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

B.P.T Plot No. 107, Quay Street, Darukhana, Mumbai - 400 010 Tel: 91-22-2371 5214 / 2372 9258 / 2372 8173 / 2373 8635 Fax: 91-22-2373 4425 / 2373 8198 • Website: www.sealinkers.com E-mail: [email protected] • [email protected]

POWERFORM 18 NOM. ROPE DIA.

NOM. ROPE DIA.

APPROX. MASS

mm

in

Kg/100m

6 7 8 9 10 11 12 1/2 13 14 15 16 17 18

5/8

3/4 20 22 7/8 24 1 26 28 30 32

1-1/4

18 24 31 39 49 59 70 78 82 95 109 124 140 157 175 194 235 240 279 313 328 380 437 497

POWERFORM 35/35P

1960N/mm2

2160N/mm2

NOM. ROPE DIA.

kN

kN

mm

MINIMUM BREAKING FORCE

29 38 52 65 81 101 116 135 141 160 182 209 237 266 291 320 379 387 462 517 542 632 721 820

14 16 18 19 20 22

111 127 148 155 177 201 232 262 295 322 359 424 433 523 585 613 710 809 920

NOM. ROPE DIA.

APPROX. MASS

in

Kg/100m

1/2

81 99 129 163 182 201 243 249 290 325 340 394 411 453 515 616 726 805 887 994 1064 1159 1298 1360

5/8 3/4

7/8 24 1 26 28 1-1/8 30 32 35 38 40 42

1-1/4 1-3/8 1-1/2

1-3/4 46 48 2 52

MINIMUM BREAKING FORCE 1960N/mm2

2160N/mm2

kN

kN

148 180 233 300 331 372 444 453 531 591 621 720 748 827 944 1125 1326 1477 1485 1646 1765 1935 2150 2256

160 192 252 321 358 399 484 490 572 640 661 788 810 904 1035 1216 1437 1588

Note: ! POWERFORM 35P is available on special request. ! Rope sizes and MBL not shown in standard table, may be available on request. ! Mass per unit lenght of POWERFORM 35P increaces by approx 3%

Note: ! ‘P’ signifies full plastic impregnation of the steel core. ! Rope sizes and MBL not shown in standard table, may be available on request.

22

Wire Ropes WHY USHA MARTIN ROPE?

WHY USHA MARTIN ROPE?

GUARANTEED RAW MATERIAL QUALITY

TPM policy

! Developed, manufactured and quality certified by own Steel Plant. ! Tailor made raw materials to ensure consistent rope quality and desired end-properties.

“It is our policy to induce change in all employees by delegation, empowerment and motivation to achieve total participation towards zero accident, zero defect and zero failure.”

GUARANTEED PRODUCT QUALITY ! State-of-the-art pickling plant. ! State-of-the-art patenting furnaces. ! Latest generation wire-drawing machinery ! Computerised rope design. ! In-house developed rope making machinery for manufacturing high-performance ropes. ! Breaking load and fatigue test equipment to guarantee desired performance and quality.

HOW TO ORDER A ROPE ! ! ! ! ! ! ! ! ! ! ! !

Nominal Diameter and tolerance. Construction/Class/Brand Name. Finish (galvanized or ungalvanised) Tensile Strength Minimum Breaking load requiement. Core-Fibre/IWRC/WSC. Lay-eg. Right hand regular lay. Lubrication Packing wooden reel/steel reel/coils. Particulars of fittings Performed / Non-preformed Exact length per reel / coil etc (special length tolerance, if any) ! Delivery time ! Special requirements ! Pre-stretching ! Packaging ! Identification ! Third-party inspection

GUARANTEED QUALITY SYSTEMS ! ISO 9001:2000 ! API ! OTIS ! ABS ! LLOYDS ! NKK ! JIPM QUALITY POLICY “Our quality policy is to fulfil customers’ requirement through reliable products and services meeting all regulatory requirements and through continual improvement of our quality management system.

ROBUST PROCESS CONTROL ! Qualified supervisors & operators trained in own institution on product process and equipment. ! Regular training of operations staff at HRD center. ! Visual display of process parameters at each stage of processing. ! Stringent quality control at every stage of manufacturing.

Authorised Distributor

usha martin

23

WIRE ROPES

Wire Ropes