Wire Line

W I R E L I N E

E Q U I P M E N T

FAST,

SAFE,

DEPENDABLE,

EFFICIENT,

WIRELINE

EQUIPMENT

111

Quality Assurance and Ordering Information Quality Assurance

National Oilwell’s commitment to quality goes beyond its accreditations and certifications. In an effort to provide wellhead pressure control equipment that exceeds industry standards, National Oilwell now supplies certification data books standard with all new assemblies sold. The certification data books provide the user and well owners with the assurance that the equipment they are using is designed and manufactured according to stringent industry standards. The certification data book provides complete traceability of a tool from the original mill heat number to the final pressure test, and is traceable by a unique indentification number stamped on each part of an assembly. Documents included in the data book are: • Documentation Index • Copy of ISO 9001 Certification • Certificate of Compliance which lists all applicable codes and standards • Traceability Log which lists all critical components by part number along with identification traceability number • Hydrostatic/Functional Test Certificate with test recorder chart • Drawing with Parts List In addition to the standard certification data books provided, Bowen Quality Assurance Department will provide, upon request, the following records. These records are retained for a period of five (5) years: • Material Test Report • Heat Treat Certification • Mechanical Test Report • Inspection Certificate — dimensional, hardness, visual • Magnetic Particle Examination • Radiograph Inspection of Welds • Weld Procedure Qualifications (if applicable) • 100% Dimensional Inspection • Quality Plans For customers operating in the North Sea area, or requiring third party verification, Bowen is fully accredited to ISO 9001 by Det Norske Veritas (DNV) to provide equipment certified to the British specification DOE SI 289 and Norwegian Petroleum Directorate (NPD) as well as compliance to API requirements.

Some of the codes, standards, specifications and agencies, as applicable, followed and utilized by National Oilwell’s Quality Assurance/Control Program are: API (American Petroleum Institute) Standards apply to all facets of manufacturing and fabrication, including Q1 Quality. ASME

(American Society of Mechanical Engineers) Bowen maintains ASME Certifications of Authorization for “U” and “UM” pressure vessels constructed under Section VIII, Division 1.

ASNT

(The American Society for Non-Destructive Testing) Bowen inspectors are qualified to ASNT-TC-1A for Magnetic Particle and Liquid Penetrant Examination.

AWS

(American Welding Society) Structural welding.

DOE

(Department of Energy – U.K.) Offshore Installations, SI 289.

DNV

(Det Norske Veritas) Certifying agency for design reviews and type or case approvals.

NACE

(National Assocation of Corrosion Engineers) Specification MR-01-75, 1984 Rev., for products used in hydrogen sulfide service (H2S).

NPD

(Norwegian Petroelum Directorate) Data books for North Sea equipment.

NVS

(Norsk Verktedsindutis Standardiseringssentol) Norsk Standard 5801, Quality Assurance System. ISO-9001

Certified Quality System

Ordering Information

National Oilwell sales/service centers located in oil producing areas throughout the world (see back cover). Call our Houston headquarters directly, or contact the office nearest you for your sales, spare parts, or technical needs. To help us provide fast, accurate response to your sales, spare parts, and technical needs, please provide as much of the following information as possible: Your company information: • Company name and address • Invoice address • Purchase order number • Method of shipping • Your name

112

Equipment Information: • Service and pressure rating • Union connection • Equipment inside diameter • Part number • Measured wireline size

Wireline Equipment Index Wireline Equipment Index

Line Wipers .................. P. 126 – 127

Grease Injection Control Heads ................ P. 122 – 123 Line Wipers .................. P. 126 – 127 Measuring Line Stuffing Boxes .... P. 128

Safety Ball Check Valves ........... P. 121 Tool Catchers ......................... P. 120

Tubing/Casing Risers ............... P. 129 Integral Union Risers ............... P. 130 SS Lightweight Risers .............. P. 131 Pump-In Subs ........................ P. 132 Inhibitor Injection Subs ............. P. 133

Manual Tool Traps ................... P. 118 Hydraulic Tool Traps ................ P. 119

Hydraulic BOPs ...................... P. 115 Slide-Lok BOPs .............. P. 116 – 117 Other BOPs ................... P. 138 – 139

Bowen Manual Blowout Preventers ................................................................ 114 Bowen Hydraulic Blowout Preventers ............................................................. 115 Bowen Slide-Lok Blowout Preventers ............................................................. 116 Bowen Slide-Lok II Blowout Preventers .......................................................... 117 Bowen Manual Tool Traps .............................................................................. 118 Bowen Hydraulic Tool Traps ........................................................................... 119 Bowen Series II Tool Catchers ......................................................................... 120 Bowen Series II Safety Ball Check Valves ........................................................ 121 Bowen Series II Grease Injection Control Heads ................................ 122 – 123 Bowen Grease Head/Tool Catcher/Ball Check Rig-Up Options ...................... 124 Bowen Seal Elastomers Quick Reference Guide ............................................. 125 Bowen Manual Line Wipers ............................................................................ 126 Bowen Hydraulic Line Wipers ......................................................................... 127 Bowen Measuring Line Stuffing Boxes ........................................................... 128 Bowen Tubing and Casing Risers ................................................................... 129 Bowen Union Risers ........................................................................................ 130 Bowen SS Series Lightweight Risers ................................................................ 131 Bowen Pump-In Subs ..................................................................................... 132 Bowen Chemical/Inhibitor Injection Subs ..................................................... 133 Bowen Quick Unions, Blanking Plugs, Caps, and Test Fixtures .................... 134 Bowen Quick Union Specifications ................................................................. 135 Bowen Crossover Adapters ............................................................................... 136 Bowen Wellhead Adapters ............................................................................... 137 Bowen Sub Sea Blowout Preventers ................................................................ 138 Bowen Snubbing and Universal Blowout Preventers ..................................... 139 Bowen Composite Rigging Sheaves and Accessories ........................... 140 – 141 Bowen Hydraulic Hand Pump Assemblies ...................................................... 142 Bowen Grease Hoses and Accessories .............................................................. 143 Bowen Grease Injection Systems Introduction ............................................... 144 Bowen Grease Injection Units Reference Guide ............................................. 145 Bowen 15,000 psi Grease Injection and Hydraulic Control Unit ........ 146 – 147 Bowen 10,000 psi Grease Injection and Hydraulic Control Unit ........ 148 – 149 Bowen 10,000 psi Grease Injection Unit .............................................. 150 – 151 Bowen 5,000 psi Grease Injection Unit ................................................ 152 – 153 Bowen 5,000 psi Grease Injection and Hydraulic Control Unit .......... 154 – 155 Bowen 5,000 and 10,000 psi Drum-Mounted Grease Injection Units ........... 156 Bowen Portable Pressure Test Unit ................................................................. 157 Bowen Pressure Control Equipment Transport Skid ...................................... 158 Bowen 10 hp Air Compressor With Diesel Engine .......................................... 159 Wireline Fishing Tools

Bowen Hydraulic Wireline Jars ........................................................................ 160 Bowen Knuckle Joints ...................................................................................... 160 Bowen Knuckle Jars ......................................................................................... 160 Bowen Single-Strand Rope Sockets ................................................................ 161 Bowen Slip-Type Rope Sockets, Overload Releasing ...................................... 161 Bowen Series 160 Side Door Overshots ........................................................... 162 Bowen Wireline Retrievers ............................................................................... 163 Bowen Sinker Bars ........................................................................................... 163 Bowen Tubular Jars ......................................................................................... 163

Wellhead Adapters .................. P. 137 Blanking Caps & Plugs ............. P. 134 Crossover Adapters ................. P. 136 Quick Unions ................. P. 134 – 135

113

Bowen Manual Blowout Preventer

Bowen Manual Blowout Preventer

Bowen Manual Blowout Preventers

Features

Bowen Manual BOPs are mechanical devices that utilize manually operated stems to actuate the rams. The rams are designed to seal around the wireline, slickline, or coiled tubing.

• Lightweight, compact and dependable. • Forged bodies. • Single and twin configuration available. • Flush-type equalizer valve. • H2S or standard service. • 21⁄2" to 61⁄2" I.D. available. • Heavy-duty rams. • 3,000 to 5,000 psi working pressure.

Bowen Manual BOP: 5,000 psi Working Pressure – Standard Service 2 1⁄2

3

4

4 1⁄2

5

5 1⁄2

6 1⁄2

Single

51647 87 lbs

51652 106 lbs

61062 222 lbs

61067 250 lbs

65174 –

51665 280

70642 678 lbs

Twin

51650 144 lbs

51654 209 lbs

61064 419 lbs

61069 480 lbs

– –

72865 –

72551 1050 lbs

Type \ ID

Bowen Manual BOP: 5,000 psi and Up Working Pressure – H2S Service 2 1⁄2

3

4

4 1⁄2

5

5 1⁄2

6 1⁄2

Single

57677 117

61809 147

61071 315

61339 355

– –

66456 400

61145 515

Twin

63514 196

63384 290

63515 570

– –

– –

– –

61148 –

Type \ ID

See page 123 for union size and information.

114

Bowen Hydraulic Blowout Preventers

Twin Hydraulic Blowout Preventer Weep hole and indicators are optional.

Bowen Hydraulic Blowout Preventers

Features

Bowen Hydraulic BOPs are hydraulically actuated devices designed to seal around wireline, slickline, or coiled tubing. Bowen equips all Hydraulic BOPs with manually operated stems to allow closing in the event of a hydraulic failure, or to lock the rams closed when they are left closed for extended periods. These preventers are equipped standard with equalizer valve assemblies. A bleedoff valve is optional.

• Lightweight, compact and dependable. • Forged bodies. • Single and twin configuration available. • Flush-type equalizer valve. • H2S or standard service. • 21⁄2" to 61⁄2" I.D. available. • Heavy-duty rams. • 3,000 to 15,000 psi working pressure.

Bowen Hydraulic BOP: 5,000 psi Working Pressure – Standard Service 2 1⁄2

3

4

4 1⁄2

5

5 1⁄2

6 1⁄2

Single

51922 117 lbs

51926 180 lbs

61040 315 lbs

61053 355 lbs

80117 –

51938 480 lbs

60615 610 lbs

Twin

51924 196 lbs

51928 300 lbs

61048 613 lbs

61057 730 lbs

72545 –

67138 820 lbs

70399 1020 lbs

Type \ ID

Bowen Hydraulic BOP: 10,000 psi Working Pressure – Standard Service 2 1⁄2

3

4

4 1⁄2

5

5 1⁄2

6 1⁄2

Single

51923 143 lbs

51927 180 lbs

79360 407 lbs

79363 450 lbs

79965 –

– –

– –

Twin

60701 232 lbs

51929 306 lbs

79358 808 lbs

79362 895 lbs

68349 –

81271 –

– –

Type \ ID

Bowen Hydraulic BOP: 5,000 psi Working Pressure – H2S Service 2 1⁄2

3

4

4 1⁄2

5

5 1⁄2

6 1⁄2

Single

57678 128 lbs

63460 161 lbs

63461 346 lbs

79715 –

80318 –

63916 –

70993 671 lbs

Twin

63382 215 lbs

61111 330 lbs

61074 654 lbs

78200 –

71767 –

– –

73867 1030 lbs

Type \ ID

Bowen Hydraulic BOP: 10,000 psi Working Pressure – H2S Service 2 1⁄2

3

4

4 1⁄2

5

5 1⁄2

6 1⁄2

Single

53820 157 lbs

55103 193 lbs

79333 447 lbs

79514 495 lbs

146294 –

– –

– –

Twin

68436 255 lbs

58207 336 lbs

79515 883 lbs

– –

150792 –

– –

– –

Type \ ID

See page 123 for union size and information.

115

Bowen Slide-Lok Blowout Preventers

Bowen Triple Slide-Lok Blowout Preventer

Bowen Slide-Lok Blowout Preventers

The Bowen Slide-Lok Blowout Preventer is a low profile heavy-duty BOP that was originally designed for use with coiled tubing. Because of its ease of maintenance and its low profile it is also used for wireline operations. SlideLok BOPs are available with union or flange connections and may also be ordered with optional removable connections. Features

• Slide-Lok design allows fast removal of actuator cylinder and rams for easy maintenance. 5,000 psi Working Pressure: Standard Service 2 1⁄2

3

4

Single

146899 342 lbs

146919 342 lbs

154809 –

Twin

146901 630 lbs

146921 630 lbs

Triple

146915 955 lbs

Quad

154807 –

Type \ ID

3

4

Single

146903 342 lbs

146923 342 lbs

154813 –

154810 –

Twin

146905 680 lbs

146925 680 lbs

154814 –

154808 955 lbs

154811 –

Triple

146907 955 lbs

150270 955 lbs

154815 –

153072 –

154812 –

Quad

146929 –

154817 –

154816 –

2 1⁄2

3

4

Single

146909 342 lbs

146931 342 lbs

154821 –

Twin

146911 680 lbs

146933 680 lbs

Triple

154818 955 lbs

Quad

154819 –

116

10,000 psi Working Pressure: H2S Service 3

4

Single

145240 342 lbs

146935 342 lbs

154803 –

154822 –

Twin

148926 680 lbs

146937 680 lbs

154804 –

148606 955 lbs

154823 –

Triple

150258 955 lbs

146939 955 lbs

154805 –

154820 –

154824 –

Quad

145076 –

146941 –

153811 –

2 1⁄2

3

4

Single

155296 355 lbs

155298 355 lbs

155302 –

Twin

155064 680 lbs

155299 680 lbs

Triple

152976 955 lbs

Quad

155297 –

See page 123 for union size and information.

Type \ ID

21⁄2

15,000 psi Working Pressure: Standard Service Type \ ID

5,000 psi Working Pressure: H2S Service 21⁄2

10,000 psi Working Pressure: Standard Service Type \ ID

• Low profile, solid block body is available in single, twin, triple, and quad configurations. • Keyless ram bore for easy ram inversion for grease injection between rams. The keyless ram bore is easier to repair. • Standard equalizer valve. (Optional manifold block is available.) • H2S or standard service. • 21⁄2" to 61⁄2" I.D. available. • Sturdy and easy-to-see ram position indicators. • 5,000 to 15,000 psi working pressure.

Type \ ID

15,000 psi Working Pressure: H2S Service 2 1⁄2

3

4

Single

154793 355 lbs

154796 355 lbs

154799 –

155303 –

Twin

154794 680 lbs

154797 680 lbs

154800 –

155300 955 lbs

155304 –

Triple

153518 955 lbs

154151 955 lbs

154801 –

155301 –

155305 –

Quad

154795 –

154798 –

154802 –

Type \ ID

Bowen Slide-Lok II Blowout Preventers

Bowen Twin Slide-Lok II Blowout Preventer The Slide-Lok II is also available in a manual 5,000 psi working pressure version.

Bowen Slide-Lok II Blowout Preventers

Features

The Bowen Slide-Lok II Blowout Preventer has all the benefits of the original Slide-Lok, but it is 50 percent lighter. The Slide-Lok II is the product of 30 years experience in wireline BOP manufacturing. It provides protection against blowouts during wireline operations. The low profile, compact Slide-Lok II is rated for 5,000 and 10,000 psi working pressure and is available for H2S and standard service.

• Lightweight, forged steel body. • Low profile. • Slide-Lok design for easy maintenance. • Keyless ram bore provides easy ram inversion for grease injection between rams. • New block-style equalizer valve. • H2S or standard service. • Sturdy ram position indicators. • 5,000 to 10,000 psi working pressure. • Convenient handle storage. • 21⁄2" to 3" I.D. available.

Bowen Twin Slide-Lok II BOPs: 5,000 psi and Up Working Pressure Type \ ID

2 1⁄2

3

Standard

154825 –

H 2S

154825 –

10,000 psi Working Pressure Type \ ID

2 1⁄2

3

154826 –

Standard

153721 –

154828 –

154827 –

H 2S

153222 –

154829 –

Optional: Multi-Valve Manifold Assembly part number 154239/005.

See page 123 for union size and information.

117

Bowen Manual Tool Traps Bowen Manual Tool Traps

Bowen Manual Tool Traps are designed to prevent wireline tools from falling downhole in the event the wireline is inadvertently pulled out of the cable head. Bowen Manual Tool Traps are tough, dependable, and easy to operate and maintain. They are rated up to 5,000 psi working pressure and are available from 2" to 61⁄2" I.D. The Stop Dog and weighted Handle ensure that the Tool Trap stays in the closed or catch position. The handle also provides a convenient visual indication of the stop dog’s position. Features

• • • • •

Compact, lightweight design. Low torque stop dog and handle (opening and closing). External position indicator handle. 2" to 61⁄2" I.D. available. 5,000 psi working pressure.

Bowen Tools recommends the use of Hydraulic Tool Traps in H2S environments.

Bowen Manual Tool Trap: 5,000 psi Working Pressure – Standard Service 2

2 1⁄2

3

4

4 1⁄2

5

5 1⁄2

5,000 psi

13220 22 lbs

12460 48 lbs

12600 63 lbs

81178 71 lbs

46024 150 lbs

11650 190 lbs

11650 199 lbs

Union

12520

12685

17885

20280

12410

12410

64524

WP \ ID

Other connections are available upon request.

See page 123 for union size and information.

118

Bowen Hydraulic Tool Traps Bowen Hydraulic Tool Traps

The Bowen Hydraulic Tool Trap is a safety device installed at the bottom of the lubricator or wellhead setup, normally just above the BOP. It prevents the loss of wire tool strings downhole if the wireline is stripped from the rope socket. A tool stop with an opening larger than the wireline, but smaller than the subsurface tool, prevents the tool from passing through. Features

• • • • • • • •

External stop dog (flapper) position indicator. Positive torsion spring ensures flapper return. Carrying handle protects indicator. Single-acting hydraulic piston design. 21⁄2" to 61⁄2" I.D. available. 5,000 psi to 15,000 psi working pressure. H2S or standard service. Manual override.

National Oilwell recommends the use of Hydraulic Tool Traps in H2S environments.

Bowen Hydraulic Tool Trap: Standard Service 2 1⁄2

3

4

4 1⁄2

5

5 1⁄2

6 1⁄2

5,000 psi

154616 110 lbs

154625 110 lbs

154837 –

155000 –

155004 –

155006 –

155006 –

10,000 psi

154400 110 lbs

154628 135 lbs

154838 –

154947 –

– –

– –

– –

15,000 psi

154834 –

154835 –

154836 –

– –

– –

– –

– –

WP \ ID

Bowen Hydraulic Tool Trap: H2S Service 2 1⁄2

3

4

4 1⁄2

5

5 1⁄2

6 1⁄2

5,000 psi

154616 110 lbs

154345 110 lbs

154631 187 lbs

155008 –

155010 –

155014 –

155016 –

10,000 psi

154622 120 lbs

154106 162 lbs

154839 –

– –

155012 –

– –

– –

15,000 psi

154130 167 lbs

154152 205 lbs

154840 –

– –

– –

– –

– –

WP\ ID

See page 123 for union size and information.

119

Bowen Series II Tool Catcher Bowen Series II Tool Catcher

The Bowen Tool Catcher is designed to catch the fishing neck of the tool string if the wireline is inadvertently parted. The catcher assembly is fail-safe while in the catch position. Hydraulic pressure is only needed to release the fishing neck. Bowen’s unique design utilizes four spring-loaded pawls to catch the fishing neck. This proven design will engage fishing neck sizes ranging from 1" thru 13⁄4" O.D. without changing parts. The Bowen Tool Catcher is the most compact, lightest designed tool catcher currently on the market. The Tool Catcher is available in two models: a union upper connection by union bottom connection design and a flow tube integral ball check valve upper connection by union bottom connection design. The integration of the tool catcher and ball check valve significantly reduces the overall height. The customer will also realize a price reduction by purchasing the integrated assembly as opposed to purchasing two separate assemblies. Features

• Lightweight and compact design (shorter stack height). • Catches 1" to 13⁄4" (nominal) fish neck without modifying catch mechanism. • Single-action spring actuated catch mechanism ensures positive engagement. • Integral ball check and flow tube connection for reduction in height and weight (optional) • 5,000 psi to 15,000 psi working pressure. • H2S or standard service.

Bowen Series II Tool Catcher: Standard Service

H2S Service 2 1⁄2

3

4

5,000 psi

154134 76 lbs

154634 84 lbs

154844 –

154845 –

10,000 psi

154234 84 lbs

154338 101 lbs

154846 –

154847 –

15,000 psi

154123 94 lbs

154153 107 lbs

154848 –

2 1⁄2

3

4

5,000 psi

154134 76 lbs

154634 84 lbs

154843 –

10,000 psi

154035 76 lbs

154635 84 lbs

15,000 psi

154841 –

154842 –

WP \ ID

Union by union models and other compatible unions available upon request. Contact National Oilwell Sales Department.

See page 123 for union size and information.

120

WP \ ID

Bowen Series II Safety Ball Check Valves Bowen Safety Ball Check Valve

The Bowen Safety Ball Check Valve is one of many redesigned tools developed and manufactured by Bowen for wireline applications. These check valves are automatic pressure shutoff valves designed for use with wireline lubricators. The check valve is located near the upper end of the lubricator, just below the pack-off assembly. If the wireline is broken and blown out, or accidentally pulled from the lubricator, the well pressure will be safely shut in by the Safety Ball Check Valve. The redesigned Safety Ball Check Valve is available with specified union connections compatible with either standard or H2S service union assemblies. Features

• Low actuation pressure. • Fail-safe automatic closure. • Compact design. • Easy to install ball check housing. • 5,000 psi to 15,000 psi working pressure. • H2S or standard service.

Bowen Series II Safety Ball Check: Standard Service

H2S Service 2 1⁄2

3

4

5,000 psi

154016 18 lbs

154340 34 lbs

154025 53 lbs

154026 59 lbs

10,000 psi

154023 39 lbs

154341 53 lbs

154046 59 lbs

154849 –

15,000 psi

154020 47 lbs

154022 53 lbs

154850 –

21⁄2

3

4

5,000 psi

154016 18 lbs

154339 34 lbs

154025 53 lbs

10,000 psi

154017 18 lbs

154019 34 lbs

15,000 psi

154021 37lbs

154027 59 lbs

WP \ ID

WP \ ID

Other compatible unions available upon request. Please contact National Oilwell Sales Department. Use Retrofit Kit 153996 for old style check valves.

See page 123 for union size and information.

121

Bowen Series II Grease Injection Control Heads

Bowen Grease Injection Control Heads

In wireline operations where high pressure exists, reduction of wellhead pressure applied to the pack-off rubbers is essential to reduce the friction on the wireline to a minimum, and to effect a complete seal. Maintaining a complete seal is of prime importance where the operation being performed will not tolerate the loss of fluid, or where loss of fluid and gases would present a major hazard, such as on offshore rigs or near populated areas. The Bowen Grease Injection Control Head was specifically designed to perform this wireline sealing function in the most efficient and economical manner available. It will maintain a complete seal, with zero loss of fluid or spray (a must when working with high pressure and H2S).

Lightweight Grease Injection Control Head 5,000 and 10,000 Working Pressure

122

Grease Injection Control Head 10,000 and 15,000 Working Pressure

Bowen Series II Grease Injection Control Heads

The Bowen Grease Injection Control Heads are available with single pack-off and dual pack-offs, and most are available with top connections for adding a Bowen Line Wiper. The use of additional pack-offs or line wipers are for conditions that require added sealing or cable cleaning. The Bowen Grease Injection Control Heads are supplied with a flow tube pin connection down for rigging up to various types and sizes of connections. For well pressures from 5,000 psi to 10,000 psi, three flow tubes are generally used. For pressures higher than 10,000 psi, four or more tubes are used. Additional flow tubes can be added if well or operating conditions demand it. Specify type of lower connection and measured line size to assure proper flow tube fit.

All grease injection control heads are rated for H2S. Lower connection used will dictate service.

Bowen Series II Grease Injection Control Heads WP Packing Part Number Weight

5,000 Single

10,000 Single

10,000 Tandem

15,000 Single

15,000 Tandem

154504* 63 lbs

154504* 63 lbs

154533 95 lbs

72364 160 lbs

153651 192 lbs

Working Pressure

Union Series

Thread O.D.

Seal Bore

5,000 10,000 15,000 5,000 10,000 15,000

475 475 634 475 634 632

4.75 4.75 6.31 4.75 6.31 6.31

3.75 3.75 4.38 3.75 4.38 3.75

12688/039 50810 58461 148914 53620 79856

154575 154673 154675 154575 154676 154677

5,000 10,000 15,000 5,000 10,000 15,000

550 551 825 550 702 700

5.50 5.50 8.25 5.50 7.00 7.00

4.38 4.88 6.00 4.38 4.75 4.38

12121/039 63282 148125/039 25866/039 62275 149273

154678 154679 154680 154681 154682 154683

5,000 10,000 15,000 5,000 10,000 15,000

703 825 889 703 825 887

7.00 8.25 8.87 7.00 8.25 8.87

5.13 6.00 6.50 5.13 6.00 5.50

147316 147315 68318/039 80234 147317 79771/039

154756 154680 154684 154757 154758 154685

* Use Line Wiper 154129

Bottom Subs Union I.D.

Service Standard

2 1⁄2 H2S

Standard 3 H2S

Standard 4 H2S

w

Bottom Sub Part Number ⁄o Ball Check With Ball Check

See page 123 for union size and information.

123

Bowen Grease Head/Tool Catcher/ Ball Check Rig-Up Options

Grease Head/Ball Check

Grease Head

Grease Head

Grease Head

Ball Check/Head Catcher

Ball Check/Head Catcher Integrated Assembly

Ball Check

Head Catcher

Head Catcher

See page 123 for union size and information.

124

Represents a Ball Check Valve

Bowen Seal Elastomers Quick Reference Guide Trade Names: Aflas, Xenox, TFEP. Temperature Range: 32° to 450°F Recommended For: Ketones, esters, amines, and halogens. Not Recommended For: Ketones, amines, hot hydrofluoric or chloro-

General Service Bowen Elastomer Reference No. B-1001 Basic Compound: Nitrile

General Description: Nitrile is the most widely used elastomer in the seal

sulfonic acids.

industry. Nitrile provides excellent compression set, tear and abrasion resistance and maybe used in limited H2S environments where seal replacement is frequent. Trade Names: Buna-N, Hycar Temperature Range: –20° to 250°F Recommended For: Ketones, esters, amines, halogens. (Nitrile does not possess good resistance to ozone, sunlight, or weather.) Bowen Compound: Formulated for maximum sealing for outer seals and line size inner seals.

Bowen Compound: Formulated for maximum sealing at high tempera-

tures and steam for outer seals and inner seals. Low Temperature Bowen Elastomer Reference No. B-4001 Basic Compound: Epichlorohydrin General Description: Epichlorohydrin is a relatively recent addition

to the petroleum resistant elastomers. Epichlorohydrin has very good low temperature properties and may be used in H2S and CO2 environments. Trade Names: Hydrin, Herclor, ECO. Temperature Range: –40° to 250°F Recommended For: Low temperature sealing, petroleum oils and fluids. Epichlorohydrin has excellent resistance to ozone and weather. Not Recommended For: Medium to high temperatures, ketones, esters, amines, or halogens. Bowen Compound: Formulated for maximum sealing at low temperatures.

Hostile Environment (High Temperature/H2S/CO2) Bowen Elastomer Reference No. B-2001 Basic Compound: Fluorocarbon General Description: Fluorocarbon combines resistance to a broader range

of chemicals than any other elastomer. Fluorocarbon has excellent high temperature properties and chemical resistance. It performs well in hostile environments. Trade Names: Viton, Fluorel, FKM. Temperature Range: –20° to 380°F Recommended For: Petroleum oils and fluids, silicone fluids and greases, halogenated hydrocarbons, acids, H2S, and CO2. Not Recommended For: Ketones, amines, hot hydrofluoric or chlorosulfonic acids. Bowen Compound: Formulated for maximum sealing at high temperatures for outer seals and inner seals.

High Abrasion Bowen Elastomer Reference No. B-5001 Basic Compound: Polyurethane General Description: Polyurethane exhibits outstanding tensile strength

and abrasion resistance. Trade Names: Urethane, Lubrithane, AU, EU. Temperature Range: 32° to 200°F Recommended For: Petroleum oils and fluids, high shock loads, high pressure, and related adverse conditions. (Good resistance to ozone and weather.) Not Recommended For: Hot water, glycol, ammonia benzene, halogen, ketones, acids, or steam. Bowen Compound: Formulated for maximum sealing under adverse conditions for outer seals, inner seals, inner seal inserts, and line rubber.

Extreme High Temperature Bowen Elastomer Reference No. B-3001 Basic Compound: Tetrafluoroelthylene propylene General Description: New elastomer with good chemical resistance and

excellent high temperature properties.

Physical Parameters and Environmental Usage

Petroleum Products

Steam

Elevated Temp.

H2S

CO2

Acids

Alkalis

Ketones

Esters

Amines

Halogens

Alcohol, Methanol, Ethanol, Glycerol

Silicone

Glycol

Chemicals and Compounds Found in Wells or Used in Well Servicing

General Service B-1001

A

B

C

B

A

B

B

D

D

D

D

A

A

C

Hostile Environment B-2001

A

D

A

A

A

A

C

C

C

C

A

A

A

C

Extreme High Temp. B-3001

A

A

A

B

–

A

A

–

–

–

–

–

A

C

Low Temperature B-4001

A

–

–

B

B

–

–

D

–

–

–

–

A

A

High Temperature B-5001

A

D

D

C

A

C

C

–

–

–

–

C

A

D

Elastomers for specialized applications are available. Contact Bowen for recommendations.

Reference Guideline for Effective Usage: A = Good to Excellent B = Fair to Good C = Good to Poor D = Not Recommended 125

Bowen Line Wipers

Bowen Line Wipers

Bowen Line Wipers are designed to wipe wirelines clean and to prevent loss of well fluids as these wirelines are removed from oil wells. Line Wipers are also used (in low pressure wells) to seal or “pack-off” around stranded cable. In this application, the flow of fluids and gases is minimized. Bowen Line Wipers are rugged, safe, dependable, and easy to operate.

Bowen Casing Line Wiper

Bowen Manual Line Wiper

Bowen Manual Line Wipers I.D.

Wiper Type

Weight (lbs)

Part Number

19⁄64 113⁄16 25⁄16 113⁄16 25⁄16 5

Tubing Tubing Tubing Solid Solid Casing

Working Pressure

5,000 5,000 5,000 2,500 5,000 3,000

Line Size 1

⁄8 – 5⁄16 1 ⁄8 – 3⁄4 3 ⁄16 – 1 3 ⁄16 – 3⁄4 3 ⁄16 – 1 7 ⁄32 – 1

23⁄8 EUE Pin 23⁄8 EUE Pin 31⁄2 O.D. EUE Pin 27⁄8 EUE Pin 27⁄8 EUE Pin 51⁄2 – 8 Thread Pin

17 21 31 20 40 68

10970 14415 10495 14125 10400 19460

5

Casing

3,000

7

51⁄2 Stub Acme Box

68

18261

⁄32 – 1

Standard Bottom Connection

Bowen Casing Line Wipers I.D.

Wiper Type

Working Pressure

Weight (lbs)

Part Number

6 1 ⁄4 6 1 ⁄2 6 1 ⁄2 2 3 ⁄4

Casing Casing Casing Automatic

3,000 3,000 3,000 1,000

7

⁄32 – 1 7 ⁄32 – 1 7 ⁄32 – 1 3 ⁄16 – 7⁄8

7 – 8 Thread Pin 7 – 8 Thread Box 7 Stub Acme Box 31⁄2 O.D. LP Pin

91 91 91 39

18840 17583 17705 8000

3 5 ⁄8

Automatic

1,500

3

41⁄2 O.D. LP Pin

70

9800

See page 123 for union size and information.

126

Line Size

⁄16 – 7⁄8

Standard Bottom Connection

Bowen Hydraulic Line Wipers

Bowen Line Wipers are available in a variety of sizes from 2" tubing through 7" casing. They are also available in manual and hydraulically operated models. Please specify line size and bottom connection when ordering. Features

• Lightweight. • Economical. • Easy maintenance. • 3,000 to 5,000 psi working pressure. Bowen Hydraulic Line Wiper

154129 Series II

Bowen Hydraulic Line Wipers I.D.

1 3 ⁄4 1 3 ⁄4 1 1 ⁄8 113⁄16 25⁄16 5 5 6 1 ⁄4 69⁄16 69⁄16 617⁄32

Working Pressure

5,000 5,000 5,000 5,000 5,000 5,000 5,000 3,000 3,000 3,000 5,000

Line Size 1

⁄ 8 – 1⁄ 2 1 ⁄ 8 – 1⁄ 2 1 ⁄ 8 – 1⁄ 2 1 ⁄ 8 – 3⁄ 4 1 ⁄8 – 1 1 ⁄8 – 1 1 ⁄8 – 1 7 ⁄32 – 1 7 ⁄32 – 1 7 ⁄32 – 1 7 ⁄32 – 1

Standard Bottom Connection*

2" LP Box Union Series 475 23⁄8 EUE Pin 27⁄8 EUE Pin 27⁄8 EUE Pin 51⁄2 Box 51⁄2 Stub Acme 7 – 8 Thread Pin 7 – 8 Thread Pin 7 – 8 Thread Pin 7 – 5 Thread Acme

Weight (lbs)

Part Number

30 37 35 50 80 112 112 126 130 126 130

154129 154129 34547 57176 19440 26540 35620 22660 22722 22661 43636

*Other bottom connections are available upon request. Please contact National Oilwell Sales Department.

See page 123 for union size and information.

127

Bowen Measuring Line Stuffing Boxes

Bowen Measuring Line Stuffing Box

Bowen Measuring Line Stuffing Boxes are designed to pack-off solid wireline of all sizes ranging from 0.062" through 0.108" line. Pack-off for 0.125" line is also available. If the line is inadvertently broken or the tools are stripped off while working under pressure, the Bowen Stuffing Boxes utilize a blowout plug to automatically shut-in well pressure. Bowen Measuring Line Stuffing Boxes are available in 5,000 psi to 15,000 psi working pressure, and for use in H2S or standard service. An EUE pin connection or integral Bowen Pin Section (with retainer nut on bottom) is also available. A lightweight aluminum Sheave Bracket Assembly to be used in conjunction with the stuffing box is available in 7", 10", or 14" sizes. Hydraulic Hand Pump Assemblies and optional high temperature packing are also available.

Bowen Measuring Line Stuffing Box Working Pressure

Line Size

Standard Bottom Connection 23⁄8 EUE Pin

Service

Weight (lbs)

Part Number

Standard

21

27490

5,000

0.072 – 0.108

10,000

0.072 – 0.108

Bowen Union Pin 17885

Standard

33

44677

10,000/15,000

0.072 – 0.108

Bowen Union Pin 37692

H2S

55

37060

15,000

0.072 – 0.108

Bowen Union Pin 22922

Standard

52

52053

See page 123 for union size and information.

128

Bowen Tubing and Casing Risers

Bowen Tubing and Casing Risers

Bowen Tubing and Casing Risers are available in a variety of sizes and standard lengths to meet our customer’s requirements. Bowen Tubing and Casing Risers are available from 23⁄8" O.D. through 75⁄8" O.D. and are rated at 3,000 psi to 5,000 psi working pressure. These Risers are available in H2S or standard service models. Bleed-off ports and valves are available upon request. Features

• Economical and lightweight. • Safety factor in compliance with API.

Bowen Tubing/Casing Risers: Standard Service I.D.

Working Pressure

Union Connection

Approx. Weight (lbs/ft)

4 Ft. Long

2 3⁄8

1.995

5,000

12520

4.4

155177

155178

155179

155180

2 7⁄8

2.441

5,000

154000

6.2

80921

153726

80609

148594

3 3⁄4

2.992

5,000

12120

8.8

155181

155182

155183

152604

5 1⁄2

4.892

5,000

12410

17.0

155184

155185

155186

155187

7

6.094

5,000

51890

32.0

155188

155189

155190

155191

O.D.

Part Numbers 6 Ft. Long 8 Ft. Long

10 Ft. Long

Bowen Tubing/Casing Risers: H2S Service I.D.

Working Pressure

Union Connection

Approx. Weight (lbs/ft)

4 Ft. Long

2 3⁄8

1.995

5,000

39530

4.4

155160

7

2 ⁄8

2.441

5,000

154000

6.2

154649

153726

151747

154650

3 3⁄4

2.992

5,000

25865

8.8

155164

155165

155166

155167

5 1⁄2

4.892

5,000

50991

17.0

155168

155169

155170

155171

7

6.094

5,000

60735

32.0

155172

155173

155174

155175

O.D.

Part Numbers 6 Ft. Long 8 Ft. Long 155161

155162

10 Ft. Long 155163

Bowen Slimline Casing Risers: Standard Service I.D.

Working Pressure

Union Connection

Approx. Weight (lbs/ft)

4 Ft. Long

5 1⁄2

4.892

5,000

6.75-4AC.SL

17.0

155066/006

7 5⁄8

6.765

5,000

9.00-4AC.SL

33.7

155291/005

155291/006

155291/007

155291/008

7 5⁄8

6.765

3,000

8.50-4AC.SL

29

147182/006

147182/005

147182/007

147182/008

O.D.

Part Numbers 6 Ft. Long 8 Ft. Long

10 Ft. Long

155066/007

155066/008

155066/005

See page 123 for union size and information.

129

Bowen Union Risers

Bowen Union Risers

Bowen Union Risers are manufactured from alloy steel and are available from 4 feet to 12 feet in length. An integral Bowen Union connection is standard, but other types of connections are also available upon request. The Union Risers are rated at 5,000 psi to 15,000 psi working pressure, and they are available in standard or H2S service models. Bleed-off ports and valves are available upon request. Features

• Continuous joint union riser (one-piece construction). • Safety factor in compliance with API. • Effects of side loading considered in design.

Bowen Union Risers: Standard Service O.D.

I.D.

Working Pressure

Union Connection

Approx. Weight (lbs/ft)

4 Ft. Long

Part Numbers 8 Ft. Long

10 Ft. Long

3 1⁄8

2 1⁄2

5,000

12685

–

36036

36036

36036

3 1⁄4

2 1⁄2

10,000

17885

11.5

51254

51254

51254

3 3⁄4

2 1⁄2

15,000

29923

20.9

52048

52048

52048

3 ⁄4

3

10,000

17885

8.8

31049

31049

31049

4

3

10,000

17880

–

20040

20040

20040

5 1⁄4

4

10,000

22550

30.9

31758

31758

31758

10 Ft. Long

3

Bowen Union Risers: H2S Service Union Connection

Approx. Weight (lbs/ft)

4 Ft. Long

Part Numbers 8 Ft. Long

5,000

44105

11.5

78452

78452

78452

10,000

37691

16.0

45948

45948

45948

5,000

44105

13.6

79608

79608

79608

15,000

59980

–

61301

61301

61301

10,000

37691

–

57448

57448

57448

3

15,000

58158

–

59372

59372

59372

4

10,000

50991

–

58745

58745

58745

O.D.

I.D.

3 1⁄4

2 1⁄2

3 1⁄2

2 1⁄2

3 3⁄4

3

4 1⁄4

2 1⁄2

4 1⁄4

3

1

5 ⁄4 5 1⁄2

Working Pressure

Risers are also available with 1⁄2" NPT port and in other lengths upon request. Please specify when ordering.

See page 123 for union size and information.

130

Bowen SS Series Lightweight Risers

Bowen SS (Severe Service) Series Lightweight Riser

The Bowen SS Series Lightweight Riser is the result of National Oilwell’s commitment to product improvement. The SS Series Lightweight Riser is made from corrosion resistant material and is rated at 10,000 psi working pressure.

PUMP-IN SUBS

A 66% reduction of weight makes the SS Riser easier to maneuver and handle. The interface between the union and threaded riser tube employs a proprietary dual seal arrangement. The primary seal is metal-to-metal, with a secondary backup o-ring seal. All this is done without any compromise to structural integrity. Well site integrity is enhanced when the SS Series equipment is used. The Bowen SS Riser is readily available in 3" and 41⁄16" sizes and is rated at 10,000 psi working pressure. Features

• Severe Service (SS) corrosion resistant amterial suitable for H2S and CO2 service, NACE approved • Dual seal arrangement: metal-to-metal and o-ring • 66% lighter than a conventional riser • Longer life, less maintenance • No painting required • Low makeup torque

Bowen SS Lightweight Riser with Bowen 43/4 – 4 x 2 Unions Part Number

ID

Working Pressure

Connection

Length

Weight

3

156538/004

3

10,000

4 ⁄4 – 4 x 2 (3.750 SB)

4

52

156538/006

3

10,000

43⁄4 – 4 x 2 (3.750 SB)

6

70

156538/008

3

10,000

43⁄4 – 4 x 2 (3.750 SB)

8

88

156538/010

3

10,000

43⁄4 – 4 x 2 (3.750 SB)

10

106

Connection

Length

Weight

Note: 41/16" ID is available upon request.

Bowen SS Lightweight Riser with Bowen 43/4 – 4 Unions Part Number

ID

Working Pressure 3

157061/004

3

10,000

4 ⁄4 – 4 (3.750 SB)

4

52

157061/006

3

10,000

43⁄4 – 4 (3.750 SB)

6

70

157061/008

3

10,000

43⁄4 – 4 (3.750 SB)

8

88

157061/010

3

10,000

43⁄4 – 4 (3.750 SB)

10

106

131

Bowen Pump-In Subs

Bowen Pump-In Subs

Bowen Pump-In Subs are designed to provide convenient access for pumping fluids into the well or bleeding of lubricator pressure. They are available with several variations of side outlet ports. Bowen Pump-In Subs are available in I.D. sizes ranging from 21⁄2" to 71⁄16" with a wide range of side outlet configurations. Available in H2S or standard service.

Bowen Pump-In Subs: Standard Service I.D. 21⁄2

3

Working Pressure 5,000 10,000 15,000 5,000 10,000 15,000

Union 12685 17885 29923 12120 17880 148124

See page 123 for union size and information.

132

Side Outlet 2" LP Box WECO 1502 WECO 2202 2" LP Box WECO 1502 WECO 2202

Bowen Pump-In Subs: H2S Service Part Number 80591 155193 155195 155218 155220 155222

I.D. 21⁄2

3

Working Pressure 5,000 10,000 15,000 5,000 10,000 15,000

Union 154000 37691 59980 25865 50058 58158

Side Outlet 2" LP Box WECO 1502 WECO 2202 2" LP Box WECO 1502 WECO 2202

Part Number 155192 155194 155196 155219 155221 155223

Bowen Chemical/Inhibitor Injection Subs

Bowen Chemical/Inhibitor Injection Sub

The Bowen Chemical/Inhibitor Injection Sub is designed for injecting cable corrosion inhibitor or anti-icing agents directly onto the wireline as it enters or exits the lubricator string during wireline service operations. Utilizing union connections, the Injection Sub is installed directly below the grease control head or slickline stuffing box. The supply system is connected to the side inlet port where inhibitor or anti-icing agents can be injected as needed. Internal felt wipers aid in coating the wireline with injection fluids and limit the amount of fluids lost in the well bore.

Bowen Chemical/Inhibitor Injection Sub: Standard Service I.D.

Working Pressure

Union Series

Weight (lbs)

Part Number

2 1⁄2

5,000 10,000 15,000

475 475 634

41 55 65

36245 36665 73975

3

5,000 10,000 15,000

550 551 825

47 89 –

25026 73772 –

4

5,000

703

–

–

Bowen Chemical/Inhibitor Injection Sub: H2S Service I.D.

Working Pressure

Union Series

Weight (lbs)

Part Number

2 1⁄2

5,000 10,000 15,000

475 634 632

52 – 102

63115 78587 72365

3

5,000 10,000 15,000

550 702 700

– 92 –

– 71612 149268

4

5,000

703

–

–

See page 123 for union size and information.

133

Bowen Quick Unions, Blanking Plugs, Caps, and Test Fixtures

Bowen Quick Unions

Bowen Quick Unions are self-aligning and particularly well suited for tub-ing lubricators. These Unions only require hand tightening to seal. Unions are designed for fast, easy makeup and are available in I.D. sizes ranging from 2" to 71⁄16" and for working pressures from 3,000 psi to 20,000 psi. These Unions are also available in H2S and standard service models. Features

• Easy connections. • Resistant to cross threading. • Lightweight.

Quick Union

Bowen Blanking Plugs, Caps, and Test Fixtures

Blanking Plug

Blanking Cap

134

Blanking Plugs and Blanking Caps are available for use on all Bowen Unions and on an assortment of other types of connections. Blanking Plugs and Blanking Caps are used as Test Fixtures when pressure testing equipment. They are also used as night caps for temporarily shutting in well pressure. Both the Blanking Plug and Blanking Cap assemblies generally come equipped with a port for connecting gauges and bleed-off valves.

Bowen Quick Union Specifications

Bowen Quick Unions: Standard Service Working Pressure

Union Series

Thread O.D.

Seal Bore

Pin Section

Box Section

Retainer Nut

Retainer Split Nut

Blanking Plug

Blanking Cap

Lifting Bail

Box Protect

Pin Protect

21⁄2

5,000 10,000 15,000

475 475 634

4.75 4.75 6.31

33⁄4 33⁄4 43⁄8

12688 17886 29922

12687 17887 29919

12686 17888 29921

70488 67414 70485

12526 17925 55669

145912 145912 53523

50776 50776 53458

50831 50831 53548

50832 50832 53549

3

5,000 10,000 15,000

550 551 825

5.50 5.50 8.25

43⁄8 47⁄8 6

12121 17881 148125

12122 17882 148126

12123 17883 22553

70486 70483 67439

13175 17895 –

– – –

62694 62694 66363

60030 60030 61032

60031 60031 61033

4

5,000 10,000 15,000

703 825 889

7.00 8.25 8.87

51⁄4 6 61⁄2

36041 22551 68318

36042 22552 68319

36043 22553 66221

67437 67439 67440

39419 – –

149132 – –

79634 – –

60723 61032 63204

60724 61033 63205

41⁄2

5,000 10,000

826 825

8.25 8.25

63⁄4 6

12411 22551

12413 22552

12412 22553

67442 67439

21050 31919

145653 –

– 66363

77174 61032

77175 61033

5

5,000 10,000

826 889

8.25 8.87

63⁄4 61⁄2

12411 68318

12413 68319

12412 66221

67442 67440

21050 66751

145653 –

– –

77174 63204

77175 63205

51⁄2

5,000 10,000

890 1063

8.87 10.62

71⁄4 8

64525 68066

64526 68065

64527 61481

– 67441

72569 –

– –

– –

– –

– –

61⁄2

5,000 10,000

988 1300

9.87 13.00

8 91⁄2

51891 77962

51892 77961

51893 66259

67438 70528

65542 70862

– –

– 74156

78987 74157

78988 74158

Lifting Bail

Box Protect

Pin Protect

I.D.

Bowen Quick Unions: H2S Service Working Pressure

Union Series

Thread O.D.

Seal Bore

Pin Section

Box Section

Retainer Nut

Retainer Split Nut

Blanking Plug

Blanking Cap

21⁄2

5,000 10,000 15,000

475 634 632

4.75 6.31 6.31

33⁄4 43⁄8 33⁄4

44107 37692 29922

44106 37693 29919

12686 29921 29921

70488 70485 70485

64328 54456 71966

153414 74759 145142

50776 145660 –

50831 53548 53548

50832 53549 53549

3

5,000 10,000 15,000

550 702 700

5.50 7.00 7.00

43⁄8 43⁄4 43⁄8

25866 50059 58159

25867 50060 58160

12123 36043 36043

70486 67437 67437

34667 63038 81045

– – 81043

62694 – –

60030 60723 60723

60031 60724 60724

4

5,000 10,000 15,000

703 825 887

7.00 8.25 8.87

51⁄4 6 51⁄2

68818 50992 79771

68819 50993 79772

36043 22553 79773

67437 67439 79774

74749 66416 80599

– 78065 80598

– 66363 –

– 61032 –

– 61033 –

41⁄2

5,000 10,000

825 889

8.25 8.87

6 61⁄2

50992 66222

50993 66223

22553 66221

67439 67440

66416 66751

78065 –

66363 –

61032 63204

61033 63205

5,000

826

8.25

63⁄4

44093

44094

12412

67442

68618

–

–

77174

77175

1

5 ⁄2

5,000 10,000

890 915

8.87 9.15

71⁄4 63⁄4

68824 61465

68825 61464

64527 61470

– 149959

72569 149992

– 149993

– –

– 155233

– 155234

61⁄2

5,000 10,000

988 1350

9.87 13.50

8 10

60736 153158

60737 153157

51893 153159

67438 153160

79021 –

– –

– –

78987 –

78988 –

I.D.

5

135

Bowen Crossover Adapters

Bowen Crossover Adapters

Bowen Crossover Adapters are designed to safely connect lubricator sections with different end connections. An Adapter can be a combination of a Bowen box section by Bowen pin section and retainer nut, or a combination of a Bowen box section by a tool joint connection (as specified). Bowen Crossover Adapters are manufactured from alloy steel and are available for H2S or standard service. Features

• 3,000 psi to 15,000 psi working pressure. • H2S or standard service. • 2" to 61⁄2" I.D. available.

See page 123 for union size and information.

136

Bowen Wellhead Adapters Bowen Wellhead Adapters

Bowen Wellhead Adapter flanges are manufacturer from alloy steel and are designed to provide a means of connecting the wireline lubricator assembly to the wellhead. Bowen Wellhead Adapter flanges are manufactured with an API flange connection on bottom and a union box connection on top. For information on blanking plug assemblies that can be used in conjunction with Wellhead Adapters, see page 94. Features

• One-piece construction. • Models available for 3,000 psi to 15,000 psi working pressure. • H2S or standard service. • 21⁄16" to 71⁄16" I.D. available. Bowen Wellhead Adapter: Standard Service Flange I.D.

Union I.D.

Ring Groove

Working Pressure

Union Series

Thread O.D.

Seal Bore

Weight (lbs)

Part Number

21⁄16

2 1⁄ 2 21⁄16 2 1⁄ 2 2 1⁄ 2

R-24 BX152 BX152 BX152

5,000 10,000 10,000 15,000

475 406 475 634

4.75 4.06 4.75 6.31

3.75 3.00 3.75 4.38

35 26 42 50

146753 41280 51446 59539

29⁄16

2 1⁄ 2 2 1⁄ 2 3

R-27 BX153 BX153

5,000 10,000 10,000

475 475 551

4.75 4.75 5.50

3.75 3.75 4.88

40 45 51

48586 41599 145718

31⁄16

2 1⁄ 2 3 2 1⁄ 2 3 4 1⁄ 2 2 1⁄ 2

R-35 R-35 BX154 BX154 BX154 BX154

5,000 5,000 10,000 10,000 10,000 15,000

475 550 475 551 825 634

4.75 5.50 4.75 5.50 8.25 6.31

3.75 4.38 3.75 4.88 6.00 4.38

70 65 36 70 85 90

49148 152123 51448 41593 150077 70038

41⁄16

4 4 1⁄ 2 3 4 1⁄ 2 2 1⁄ 2

R-39 R-39 BX155 BX155 BX155

5,000 5,000 10,000 10,000 15,000

703 826 551 825 634

7.00 8.25 5.50 8.25 6.31

5.25 6.75 4.88 6.00 4.38

120 96 121 100 150

149878 149871 81298 152289 77966

5 1⁄ 8

5

R-44

5,000

826

8.25

6.75

180

150934

71⁄16

6 1⁄ 2

R-46

3,000

988

9.87

8.00

190

150997

Bowen Wellhead Adapter: H2S Service Flange I.D.

Union I.D.

Ring Groove

Working Pressure

Union Series

Thread O.D.

Seal Bore

Weight (lbs)

Part Number

21⁄16

2 1⁄ 2 2 1⁄ 2 3 2 1⁄ 2

R-24 BX152 BX152 BX152

5,000 10,000 10,000 15,000

475 634 702 632

4.75 6.31 7.00 6.31

3.75 4.38 4.75 3.75

35 45 50 54

58847 51767 63487 77930

9

2 1⁄ 2 2 1⁄ 2 3 2 1⁄ 2

R-27 BX153 BX153 BX153

5,000 10,000 10,000 15,000

475 634 702 632

4.75 6.31 7.00 6.31

3.75 4.38 4.75 3.75

40 65 65 70

58848 51768 63486 60190

2 1⁄ 2 3 2 1⁄ 2 3 4 2 1⁄ 2 3

R-35 R-35 BX154 BX154 BX154 BX154 BX154

5,000 5,000 10,000 10,000 10,000 15,000 15,000

475 550 634 702 825 632 700

4.75 5.50 6.31 7.00 8.25 6.31 7.00

3.75 4.38 4.38 4.75 6.00 3.75 4.38

70 70 85 90 90 96 64

58849 150494 51769 63470 68101 77931 59373

2 1⁄ 2 4 6 1⁄ 2 2 1⁄ 2 3 4

R-39 R-39 R-39 BX155 BX155 BX155

5,000 5,000 5,000 10,000 10,000 10,000

475 703 988 634 702 825

4.75 7.00 9.87 6.31 7.00 8.25

3.75 5.25 8.00 4.38 4.75 6.00

89 102 102 89 121 130

58850 79922 151338 51770 63037 71238

2 ⁄16

31⁄16

41⁄16

51⁄8

5

R-44

5,000

826

8.25

6.75

180

149290

1

4 6 1⁄ 2

R-46 R-46

5,000 5,000

703 988

7.00 9.87

5.25 8.00

187 187

150492 150155

7 ⁄16

See page 123 for union size and information.

137

Bowen Sub Sea Blowout Preventers

Bowen Sub Sea Blowout Preventers

Bowen Sub Sea Blowout Preventers are constructed from special alloy steel and are specially designed to seal off or shear coiled tubing and wireline during sub sea well servicing operations. Bowen Sub Sea Blowout Preventers are low profile, hydraulically actuated units that are available with single or dual bore. The hydraulic actuator assemblies utilize an automatic locking device that locks the rams in the closed position and does not require the use of sequencing valves, thus reducing size and cost. Bowen Sub Sea Blowout Preventers are available in working pressures from 5,000 psi to 15,000 psi.

For more information on this Blowout Preventer please contact your local National Oilwell representative.

138

Bowen Snubbing and Universal Blowout Preventers

Bowen Snubbing and Universal Blowout Preventers

Snubbing Blowout Preventer

National Oilwell manufactures Bowen Snubbing and Universal Blowout Preventers that are designed to seal off tubing strings during well servicing operations which require snubbing pipe into or out of a well under pressure. Both of these rugged blowout preventers feature high pressure ratings in a compact size. The popular snubbing blowout preventers are completely hydraulic and are designed for fast ram seal removal and replacement. Both blowout preventers are rated for H2S service and are available with internal diameters that range from 29⁄16" to 71⁄16". Working pressures range from 10,000 psi to 20,000 psi.

Universal Blowout Preventer

Bowen Snubbing Blowout Preventers: H2S Service I.D. (in)

Working Pressure

Type

29⁄16

20,000

Single

Standard Connection

Max. Size Pipe Pack-Off

Weight (lbs)

Part Number

1.90 O.D. Tubing

1,450

79289

29⁄16 6 BX 20,000 psi Flange

1

1

3

3 ⁄16

20,000

Single

3 ⁄16 6 BX 20,000 psi Flange

2 ⁄8 O.D. Tubing

–

146309

41⁄16

15,000

Single

41⁄16 6 BX 15,000 psi Flange

27⁄8 O.D. Tubing

1,850

78684

41⁄16

15,000

Twin

41⁄16 6 BX 15,000 psi Flange

27⁄8 O.D. Tubing

3,510

79288

1

1

7

4 ⁄16

20,000

Single

4 ⁄16 6 BX 20,000 psi Flange

2 ⁄8 O.D. Tubing

–

81296

71⁄16

10,000

Single

71⁄16 6 BX 10,000 psi Flange

59⁄16 O.D. Tubing

2,200

63642

Max. Size Pipe Pack-Off

Weight (lbs)

Part Number

Bowen Universal Blowout Preventers: H2S Service I.D. (in)

Working Pressure

29⁄16

15,000

Type

Standard Connection

Single

58158 Union

1.90 O.D. Tubing

400

80214 80794

9

2 ⁄16

15,000

Single

2 ⁄16 6 BX 15,000 psi Flange

1.90 O.D. Tubing

420

29⁄16

15,000

Twin

58158 Union

1.90 O.D. Tubing

–

80242

29⁄16

15,000

Twin

29⁄16 6 BX 15,000 psi Flange

1.90 O.D. Tubing

–

80796

41⁄16

10,000

Single

41⁄16 6 BX 10,000 psi Flange

27⁄8 O.D. Tubing

750

77136

–

77140

1

4 ⁄16

10,000

Twin

9

1

4 ⁄16 6 BX 10,000 psi Flange

7

2 ⁄8 O.D. Tubing

For more information on these Blowout Preventers please contact your local National Oilwell representative.

139

Bowen Composite Rigging Sheaves and Accessories

Bowen Sheave Specifications Sheave Wheel Diameter Item Wireline Diameter Width at Axel Shaft Height (handle to clevis pin) Sheave Weight

14 Inch

17 Inch

20 Inch

Lines up to 5⁄16"

Lines up to 15⁄32"

Lines up to 1⁄8"

Lines up to 5⁄8"

26 Inch

51⁄2 inches

51⁄2 inches

51⁄2 inches

51⁄2 inches

27 inches

30 inches

NA

39 inches

31 pounds

33 pounds

30 pounds

74 pounds

Proof Test Load

22,500 pounds

30,000 pounds

30,000 pounds

48,000 pounds

Safe Working Load

15,000 pounds

20,000 pounds

20,000 pounds

32,000 pounds

Bowen Composite Rigging Sheaves: 14 Inch Wheel Diameter Clevis Type Nominal Line Size*

140

AWS

EYE

HES

SWS

3

⁄16"

154124/015

154124/016

154124/017

154124/018

7

⁄32"

154124/019

154124/020

154124/021

154124/022

1

⁄4"

154124/023

154124/024

154124/025

154124/026

Composite Rigging Sheaves and Accessories

Composite Rigging Sheaves

endured years of actual field testing and has been proven to cause less wear to the line. Reduced line friction and increased bend radius of the sheave wheel also contribute to less wear on the line.

In a continuing effort to provide state of the art products, National Oilwell is pleased to offer a full line of Composite Rigging Sheaves and accessories for wireline operations. These Sheaves are quickly proving to be the industry standard. Design criteria for the Composite Rigging Sheaves includes: • Lightweight: The Composite Sheaves are up to 60 percent lighter than conventional sheaves.

• Durability and Strength: Designed to withstand the abuses of the rig site, the sheaves have high impact poly covers with cast 17-4 PH stainless steel components. Pull tests, traceability, mag particle inspection and X-ray inspection are standard procedures with each sheave.

• Safety: The Composite Sheaves were designed with personal safety in mind. A unique protective cover and guide prevent hands and clothing from becoming entangled. These Sheaves are much less likely to cause injury than other designs.

National Oilwell offers full support of this product line. This support includes accessories and replacement parts. Servicing of these composite rigging sheaves is also available at National Oilwell districts around the world.

• Improved Wireline Life: The innovative polymeric sheave wheel has

The composite rigging sheaves are available in 14", 17", 20" and 26" diameters. Accessories include hand guards and floor stands. Contact National Oilwell for more information regarding this product.

Bowen Composite Rigging Sheaves: 17 Inch Wheel Diameter Clevis Type Nominal Line Size*

AWS

EYE

HES

SWS

7

⁄32"

154125/021

154125/022

154125/023

154125/024

1

⁄4"

154125/025

154125/026

154125/027

154125/028

5

⁄16"

154125/029

154125/030

154125/031

154125/032

3

⁄8"

154125/033

154125/010

154125/034

154125/035

Bowen Composite Rigging Sheaves: 26 Inch Wheel Diameter Clevis Type Nominal Line Size*

AWS

EYE

HES

SWS

3

⁄8" – 0.390"

154126/053

N/A

154126/058

154126/054

7

⁄16" – 15⁄32"

154126/055

N/A

154126/056

154126/050

17

⁄32"

154126/051

N/A

154126/061

154126/062

5

⁄8"

154126/052

N/A

154126/064

154126/065

Bowen Rigging Sheave Accessories Part Numbers Item

14 Inch

17 Inch

20 Inch

26 Inch

Sheave Assembly

154124/005

154125/005

154295/005

154126/005

Hand Guard

154204/005

154204/005

154204/005

154203/005

Rig-Up Yoke

154460/005

154460/005

154460/005

154460/005

Floor Stand

154127/005

154127/005

154127/005

154128/005

* Line size up to 10% smaller than groove size is permissible with Wireline Technologies Composite Sheave Wheel. Note: When ordering Sheave Assemblies specify line size and clevis type.

141

Bowen Hydraulic Hand Pump Assemblies

Bridle Assembly OPEN

CLOSE

Hydraulic Hose

Bowen Hydraulic Hand Pump Assemblies are lightweight, dependable, economical, and safe. They provide convenient operation of hydraulically actuated equipment. Each hand pump assembly is designed and manufactured for use with a specific hydraulically actuated unit, and they are equipped with the necessary hoses and quick disconnects.

CLOSE

OPEN

OPEN

CLOSE

OPEN

CLOSE

Bowen Hydraulic Hand Pump Assemblies

Hydraulic Hand Pump Assemblies

Bridle Assembly I.D.

Working Pressure

BOP Size (in)

0.25

3,000

21⁄2" – 61⁄2"

Part Number 154172*

Connection

Part Number

Hydraulic Hose*: 3,000 psi Working Pressure I.D.

Length (ft)

0.25

50

1

⁄4" NPT

19066/050

0.25

75

1

⁄4" NPT

19066/075

0.25

100

1

⁄4" NPT

19066/100

0.25

120

1

⁄4" NPT

19066/120

0.25

150

1

⁄4" NPT

19066/150 *Hoses include 1⁄4" male and female Quick Disconnects

Hand Pumps Max. Pressure

Reservoir Capacity (in3)

10,000

120

Line Wiper

19073/038

3,000

120

Line Wiper, Measuring Line Stuffing Box, Single-Acting Tool Trap, Single-Acting Tool Catcher

31661/010

3,000

120

Blowout Preventer, Tool Catcher, Tool Trap

22223/022

3,000

120

Twin Blowout Preventer

38646/009

Primary Use

Part Number

Hydraulic Quick Disconnect Fittings: 1⁄4" NPT – 3,000 psi Working Pressure Style

142

Connection

Part Number

Coupler

1

201624

Nipple

1

⁄4" NPT Pin

29481

Coupler

1

⁄4" NPT Box

19067

Nipple

1

⁄4" NPT Box

19068

⁄4" NPT Pin

Bowen Grease Hoses and Accessories Grease Hose Adapters I.D.

Working Pressure

0.31

20,000

1" – 12 Swivel Nut Male x 0.56" AEMP (13⁄16" – 16 Thread)

154216/005

0.44

20,000

1" – 12 Swivel Nut Male x 0.75" AEMP (0.75" NPSM Thread)

154182/005

0.44

20,000

1" – 12 Swivel Nut Male x 1" – 12 Male

0.31

20,000

3

⁄4" – 16 Swivel Nut Male x 0.56" AEMP (13⁄16" – 16 Thread)

154184/005

0.33

20,000

3

⁄4" – 16 Swivel Nut Male x 0.75" AEMP (0.75" NPSM Thread)

154185/005

0.31

10,000

0.31

10,000

0.31

20,000

Connection

Part Number

154183/005

1

1" – 12 Swivel Nut Male x ⁄2" NPT Male 3

214904/005

⁄4" – 16 Swivel Nut Male x 1⁄2" NPT Male

154187/005

1" – 12 Swivel Nut Male x 11⁄8" Flow Line

154215/005

Grease Hose Connectors I.D.

Working Pressure

0.50

10,000

Connection

Part Number

0.50" Union Assembly With 1⁄2" NPT Female

28080/005

1

0.50

10,000

0.50" Union Thread Half With ⁄2" NPT Female

0.50

10,000

0.50" Union Plain Half With 1⁄2" NPT Female28081/005

28083/005

0.50

10,000

0.50" Union Nut

0.44

20,000

High Pressure Quick Disconnect Assembly With 0.75" – Swivel Nut Male

154187/005

0.25

20,000

High Pressure Quick Disconnect Assembly With 0.56" AEMP Female

154851/005

0.25

15,000

High Pressure Quick Disconnect Assembly With 1⁄2" NPT Female

154852/005

28082/005

Grease Hoses I.D.

Working Pressure

Length (ft)

Type

0.50

10,000

50

Polyflex

1

⁄2" NPT Male

Connection

Part Number 154180/050

0.50

10,000

75

Polyflex

1

⁄2" NPT Male

154180/075

⁄2" NPT Male

154180/100

⁄2" NPT Male

154180/120

0.50

10,000

100

Polyflex

1

0.50

10,000

120

Polyflex

1

0.33

20,000

50

Polyflex

0.75" – 16 Swivel Nut Female

154188/050

0.33

20,000

75

Polyflex

0.75" – 16 Swivel Nut Female

154188/075

0.50

20,000

100

Polyflex

1" – 12 Swivel Nut Female

154189/100

0.50

20,000

120

Polyflex

1" – 12 Swivel Nut Female

154189/120

0.50

10,000

50

Waterblast

1

⁄4" NPT Male x 1⁄2" Quick Union

154853/050

0.25

10,000

50

Waterblast

1

⁄2" NPT Male x 1⁄2" Quick Union

154854/050

⁄2" NPT Male x 1⁄2" Quick Union

154854/050

0.50

10,000

50

Waterblast

1

0.50

10,000

75

Waterblast

1

⁄2" NPT Male x 1⁄2" Quick Union

154854/075

0.50

10,000

100

Waterblast

1

⁄2" NPT Male x 1⁄2" Quick Union

154854/100

1

0.50

10,000

120

Waterblast

1

⁄2" NPT Male x ⁄2" Quick Union

154854/120

0.50

10,000

150

Waterblast

1

⁄2" NPT Male x 1⁄2" Quick Union

154854/150

0.50

10,000

50

Polyflex

1

⁄2" NPT Male x 1⁄2" Quick Union

154854/050

1

0.50

10,000

75

Polyflex

1

⁄2" NPT Male x ⁄2" Quick Union

154855/075

0.50

10,000

100

Polyflex

1

⁄2" NPT Male x 1⁄2" Quick Union

154855/100

0.50

10,000

120

Polyflex

1

⁄2" NPT Male x 1⁄2" Quick Union

154855/120

143

Bowen Grease Injection Systems

N

ational Oilwell offers a wide range of Bowen Grease Injection and Hydraulic Control Systems for the wireline industry. From very basic units to the most sophisticated modular type package used in the North Sea, these units are considerably varied in design to meet the multiplicity of operating conditions, well pressure, power sources and packaging configurations required by the industry. National Oilwell’s basic line of Bowen Grease Injection Systems includes rugged and dependable lower cost units consisting of a power supply, grease pump, grease reservoir and control panel all mounted on a durable skid unit. These units are available in 5,000 psi, 10,000 psi and 15,000 psi working pressures, depending on the required output pressure. Either airdriven or hydraulically-driven grease injection pumps are available on these units. National Oilwell also manufactures a complete line of state of the art Modular Grease Injection Systems and Hydraulic Control Modules. Some of the features include: • Centrally located, machine engraved stainless steel control panels with color coded schematics • Bilingual control panels available • Integral hydraulic pressure control systems • Air-driven or hydraulically-driven grease pumps with 22,500 psi capacity • High quality stainless steel gauges, valves and tubing • Modular design — pressure test unit, chemical injection unit, accumulator system, diesel powered air supply system, or equipment transport frame can be added • Wet or dry center hose reels for grease, hydraulic and pnuematic functions • Equipment transport frames for pressure control equipment and grease injection module • Rugged weather resistant design for offshore use • Wide range of configurations and options for every need • Can be serviced at Bowen locations around the world Options include: • Pressure testing units — built-in or portable • Chemical/inhibitor injection pumps • Accumulator systems • Backup systems • Zone-rated diesel engines • Galvanized frames • Hose bundling • PCE protective cages For more detailed information on what National Oilwell has to offer, or for your specific needs, contact your local National Oilwell sales representative.

144

Bowen 5,000 psi Grease Injection Unit

Bowen 5,000 psi Grease Injection and Hydraulic Control Unit

Bowen Grease Injection Units Reference Guide Options Available on All Skids

Grease Injection Skids With Built-In Hydraulic Controls for Pressure Control Equipment

Model Air Powered Hydraulic

WP 5,000 psi 10,000 psi 15,000 psi 10,000 psi 15,000 psi

Max. WP 10,000 psi 14,000 psi 20,450 psi 15,000 psi 22,500 psi

Part Number 217200 216803 216833 217565 217566

• Galvanized frame. • PVC canvas cover. • Control panel available in a variety of languages. • Modular add-on pressure test unit. • Modular add-on diesel driven air compressor. • Lift sling. • Separate equipment transport skid for all necessary equipment and tools.

Max. WP 10,000 psi 14,000 psi 20,450 psi 15,000 psi 22,500 psi

Part Number 217494 217530 217721 217722 217723

Drum-Mounted Grease Pumps

Grease Injection Skids Only

Model Air Powered Hydraulic

WP 5,000 psi 10,000 psi 15,000 psi 10,000 psi 15,000 psi

WP 5,000 psi 10,000 psi

Model Air Powered

Max. WP 10,000 psi 14,000 psi

Part Number 217531 217386

Model Quick Reference Guide

Part Number

Air Powered

216803 216833 217200 217386 217530 217494 217531 217565 217566 217721 217722 217723

✓ ✓ ✓ ✓ ✓ ✓ ✓

Hydraulic Powered

5,000 psi Working Pressure

10,000 psi Working Pressure

15,000 psi Working Pressure

✓ ✓ ✓

Built-In Hydraulic Controls for Pressure Control Equip.

Skid Only

Drum Mounted

✓ ✓ ✓

✓

✓

✓

✓ ✓

✓ ✓

✓

✓ ✓

✓

✓ ✓

✓

✓ ✓

✓

✓ ✓ ✓ ✓ ✓

✓

Standard Features Quick Reference Guide

Part Number

Page Number*

216803 216833 217200 217386 217494 217530 217531 217565 217566 217721 217722 217723

36 34 42 44 40 38 44

Hose Reels

Fork Lift Slots

Hydraulic Control of Pressure Equipment

Redundant Grease Pumps

Built-In Test Equipment

Built-In Strorage for Pressure Control Equip.

✓ ✓ ✓

✓ ✓ ✓

✓ ✓ ✓

✓ ✓ ✓

✓ ✓ ✓

✓

✓

✓ ✓

✓ ✓

✓ ✓

✓ ✓ ✓ ✓ ✓

✓ ✓ ✓ ✓ ✓

✓ ✓ ✓ ✓ ✓

Central Control Panel

✓

✓ ✓

✓ ✓ ✓

*See individual descriptions for available options.

145

Bowen 15,000 psi Grease Injection and Hydraulic Control Unit

LINE WIPER PRESSURE

WASTE LINE

GICH VALVE

STUFFING BOX PRESSURE DUMP

CROSSOVER VALVE BACKUP

TOOLS

RELEASE DUMP

DUMP TOOL CATCHER CATCH GREASE PRESSURE

SET HYDRAULIC

GREASE PRESSURE

PRESSURE TO 1200 PSI CLOSE

TOOL TRAP OPEN

CLOSE GREASE

GREASE

PUMP

PUMP

1

2

BOP VALVE TURN TO ADJUST REGULATOR BOP 1 OPEN

TURN TO

TURN TO

ADJUST

ADJUST

REGULATOR

REGULATOR CLOSE

OPEN

BACK UP

HIGH PRESSURE

PUMP

PUMP

BOP 2

AIR SUPPLY PRESSURE

CLOSE

OPEN

Bowen 15,000 psi Grease Injection and Hydraulic Control Unit

This compact air operated control module is rated for up to 15,000 psi working pressure. It provides convenient remote hydraulic operation of pressure control equipment from a central control panel. The controls for operating dual grease pumps are also centrally located on the control panel. The unit is designed with corrosion resistant materials and is suitable for land or offshore use.

BOP 3

Features

• Redundant pumps for grease injection and hydraulic actuation. • Tubular steel frame galvanized for corrosion protection. • Stainless steel control panel, gauges, tubing, fittings and valves. • Wet center stainless steel hose reels. • Fork lift slots. • Compact, rugged design. Options

• Accumulator assist for hydraulic circuit. • PVC canvas cover. • Sandblasted, dimet coated, epoxy enamel primer and finish. • Modular add-on pressure test unit. • Modular add-on diesel driven air compressor. • Four point lift sling. • Control panel available in a variety of languages.

146

Bowen 15,000 psi Grease Injection and Hydraulic Control Unit Panel and Specs LINE WIPER PRESSURE

WASTE LINE

GICH VALVE

STUFFING BOX PRESSURE DUMP

CROSSOVER VALVE BACKUP

TOOLS

RELEASE DUMP

DUMP TOOL CATCHER CATCH GREASE PRESSURE

SET HYDRAULIC

GREASE PRESSURE

PRESSURE TO 1200 PSI CLOSE

TOOL TRAP OPEN

CLOSE GREASE

GREASE

PUMP

PUMP

1

2

BOP VALVE TURN TO ADJUST REGULATOR BOP 1 OPEN

TURN TO

TURN TO

ADJUST

ADJUST

REGULATOR

REGULATOR CLOSE

OPEN

BACK UP

HIGH PRESSURE

PUMP

PUMP

BOP 2

AIR SUPPLY PRESSURE

CLOSE

OPEN

BOP 3

Product Specifications Part Number 216833 Grease Pumps Two air-driven 235:1 ratio Wiwa grease pumps, 20,450 psi maximum pressure

Weight of Complete Assembly 3,000 lbs (dry) Hoses Grease Injection

100 feet, 1⁄2 inch I.D., 20,400 psi

Grease Return

100 feet, 1⁄2 inch I.D., 20,400 psi

One air-driven 35:1 ratio hydraulic pump, 3,500 psi maximum pressure

BOP Injection

75 feet, 1⁄2 inch I.D., 20,400 psi

One 3,000 psi hand pump for BOP, tool trap and tool catcher control

Lower BOP (2)

75 feet, 1⁄4 inch I.D., 5,000 psi

One 9,000 psi hand pump for line wiper and stuffing box control

Middle BOP (2)

75 feet, 1⁄4 inch I.D., 5,000 psi

Upper BOP (2)

75 feet, 1⁄4 inch I.D., 5,000 psi

One 116 gallon grease tank

Tool Trap

50 feet, 1⁄4 inch I.D., 5,000 psi

One 5.1 gallon hydraulic tank

Line Wiper

100 feet, 1⁄4 inch I.D., 5,000 psi

Stuffing Box

100 feet, 1⁄4 inch I.D., 5,000 psi

Tool Catcher

100 feet, 1⁄4 inch I.D., 5,000 psi

Waste Hose

50 feet, 1⁄2 inch I.D., 20,400 psi

Hydraulic Pumps

Tanks

Dimensions 3

41 ⁄16 inches wide x 67 inches long x 67 inches high Control Panel Color coded, engraved stainless steel and components

All hoses rated for –40°F to 200°F (–40°C to 93°C).

147

Bowen 10,000 psi Grease Injection and Hydraulic Control Unit

Bowen 10,000 psi Grease Injection and Hydraulic Control Unit

This compact air operated control module is rated for up to 10,000 psi working pressure. It provides convenient remote hydraulic operation of pressure control equipment from a central control panel. The controls for operating dual grease pumps are also centrally located on the control panel. The unit is designed with corrosion resistant materials and is suitable for land or offshore use.

Features

• Redundant pumps for grease injection and hydraulic actuation. • Tubular steel frame, sandblasted, dimet coated, epoxy enamel primer and finish. • Stainless steel control panel, gauges, tubing, fittings and valves. • Removable screen for protection of tubing while still providing easy maintenance. • Four point lift sling. • One 3.3 cubic foot storage compartment. • Wet center stainless steel hose reels. • Fork lift slots. • Compact, rugged design. Options

• Accumulator assist for hydraulic circuit. • PVC canvas cover. • Galvanized frame. • Modular add-on pressure test unit. • Modular add-on diesel driven air compressor. • Control panel available in a variety of languages.

148

Bowen 10,000 psi Grease Injection and Hydraulic Control Unit Panel and Specs LINE WIPER PRESSURE

WASTE LINE

GICH VALVE

STUFFING BOX PRESSURE

DUMP

DUMP

CROSSOVER VALVE

BACKUP

TOOLS

DUMP BOP VALVE

GREASE PRESSURE

GREASE PRESSURE RELEASE

TOOL CATCHER

CATCH

CLOSE

TOOL GREASE

GREASE

PUMP

PUMP

1

TRAP TURN TO ADJUST

2

REGULATOR

OPEN

TURN TO

TURN TO

ADJUST

ADJUST

REGULATOR

REGULATOR

CLOSE

BOP 1 BACK UP PUMP

PUMP

OPEN

AIR SUPPLY

CLOSE

PRESSURE

BOP 2

OPEN

Product Specifications Part Number 216803 Grease Pumps Two air-driven 140:1 ratio Lincoln grease pumps, 14,000 psi maximum output

Weight of Complete Assembly 2,900 lbs (dry) Hoses Grease Injection

120 feet, 1⁄2 inch I.D., 10,000 psi

Grease Return

120 feet, 1⁄2 inch I.D., 10,000 psi

One air-driven 35:1 ratio hydraulic pump, 3,500 psi maximum output

BOP Injection

75 feet, 1⁄2 inch I.D., 10,000 psi

One 3,000 psi hand pump for BOP, tool retainer and tool catcher control

Lower BOP (2)

75 feet, 1⁄4 inch I.D., 5,000 psi

One 9,000 psi hand pump for line wiper and stuffing box control

Upper BOP (2)

75 feet, 1⁄4 inch I.D., 5,000 psi

Tool Retainer (2)

75 feet, 1⁄4 inch I.D., 5,000 psi

Hydraulic Pumps

Tanks One 100 gallon grease tank

Head Catcher

120 feet, 1⁄4 inch I.D., 5,000 psi

One 3.5 gallon hydraulic tank

Stuffing Box

120 feet, 1⁄4 inch I.D., 5,000 psi

Line Wiper

120 feet, 1⁄4 inch I.D., 5,000 psi

Air Supply

40 feet, 3⁄4 inch I.D., 1,250 psi

Dimensions 3

39 ⁄16 inches wide x 63 inches long x 66 inches high Control Panel Color coded, engraved stainless steel and components

All hoses rated for –40°F to 200°F (–40°C to 93°C).

149

10,000 PSI GREASE INJECTION UNIT

Bowen 10,000 psi Grease Injection Unit

Dual Grease Pumps Alone

With Return Drum and Hose Reels

Bowen 10,000 psi Grease Injection Unit

Options

This compact and economical air operated control module is rated up to 10,000 psi working pressure. It provides convenient remote operation of dual grease pumps from a central control panel. The unit is designed with corrosion resistant materials and is suitable for land or offshore use.

• Same unit less return drum and hose reels with 140 gallon tank. • PVC canvas cover. • Galvanized frame. • Modular add-on pressure test unit. • Modular add-on diesel driven air compressor. • Control panel available in a variety of languages.

Standard Features

• Redundant pumps for grease injection. • Tubular steel frame, sandblasted, dimet coated, epoxy enamel primer and finish. • Stainless steel control panel, gauges, tubing, fittings and valves. • 3.3 cubic foot storage compartment. • Wet center hose reels. • Fork lift slots. • Compact, rugged design.

150

Bowen 10,000 psi Grease Injection Unit Control Panel and Specifications

WASTE LINE

GICH VALVE

DUMP

CROSSOVER VALVE

BOP VALVE

GREASE PRESSURE

GREASE PRESSURE

GREASE

GREASE

PUMP

PUMP

1

2

TURN TO

TURN TO

ADJUST

ADJUST

REGULATOR

REGULATOR

AIR SUPPLY PRESSURE

Product Specifications Part Number 217530 Grease Pumps Two air-driven 140:1 ratio Lincoln grease pumps, 14,000 psi maximum pressure Tanks One 110 gallon grease tank One removable 55 gallon return drum Dimensions 35 inches wide x 535⁄8 inches long x 767⁄16 inches high Control Panel Color coded, engraved stainless steel and components Dry Weight of Complete Assembly 2,000 lbs Hoses Grease Injection

120 feet, 1⁄2 inch I.D., 10,000 psi

Grease Return

120 feet, 1⁄2 inch I.D., 10,000 psi

All hoses rated for –40°F to 200°F (–40°C to 93°C).

151

Bowen 5,000 psi Grease Injection Unit

Bowen 5,000 psi Grease Injection Unit

Options

This compact and economical air operated control module is rated for up to 5,000 psi working pressure with a maximum pump pressure of 10,000 psi. It provides convenient remote operation of dual grease pumps from a central control panel. The unit is designed with corrosion resistant materials and is suitable for land or offshore use.

• Same unit less return drum and hose reels. • PVC canvas cover. • Galvanized frame. • Modular add-on pressure test unit. • Modular add-on diesel driven air compressor. • Control panel available in a variety of languages.

Standard Features

• Redundant pumps for grease injection. • Tubular steel frame, sandblasted, dimet coated, epoxy enamel primer and finish. • Stainless steel control panel, gauges, tubing, fittings and valves. • Wet center hose reels. • Fork lift slots. • Compact, rugged design.

152

Bowen 5,000 psi Grease Injection Unit Control Panel and Specifications

WASTE LINE

GICH VALVE

DUMP

CROSSOVER VALVE

BOP VALVE

GREASE PRESSURE

GREASE PRESSURE

GREASE

GREASE

PUMP

PUMP

1

2

TURN TO

TURN TO

ADJUST

ADJUST

REGULATOR

REGULATOR

AIR SUPPLY PRESSURE

Product Specifications Part Number 217494 Grease Pump Two air-driven 100:1 ratio Aro grease pumps, 10,000 psi maximum pressure Tanks One 110 gallon (416 liter) grease tank One removable 55 gallon return drum Dimensions 35 inches wide x 535⁄8 inches long x 767⁄16 inches high Control Panel Engraved stainless steel and components Dry Weight of Complete Assembly 1,820 lbs (est.) Hoses Grease Injection

100 feet, 1⁄2 inch I.D., 10,000 psi

Grease Return

100 feet, 1⁄2 inch I.D., 10,000 psi

All hoses rated for –40°F to 200°F (–40°C to 93°C).

153

Bowen 5,000 psi Grease Injection and Hydraulic Control Unit

Bowen 5,000 psi Grease Injection and Hydraulic Control Unit

This compact air operated control module is rated for up to 5,000 psi working pressure. It provides convenient remote hydraulic operation of pressure control equipment from a central control panel. The controls for operating dual grease pumps and a 10,000 psi water/glycol test unit are also centrally located on the control panel. The unit is designed with corrosion resistant materials and is suitable for land or offshore use. Unit includes accommodations for pressure control equipment consisting of up to nine eight-foot risers, a grease control head with flow tubes, and a BOP. Standard Features

• Redundant pumps for grease injection. • Dual test pumps for rapid filling and testing of pressure control equipment. • Storage for nine eight-foot risers, a grease control head with flow tubes, and a BOP.

154

• Tubular steel frame, sandblasted, dimet coated, epoxy enamel primer and finish. • Stainless steel control panel, gauges, tubing, fittings and valves. • 20 gallon air reservoir. • Two sealed storage compartments, 4.3 cubic feet each. • One hose basket, 10.6 cubic feet. • Single five-hose bundle on one hose reel, wet center for grease and dry center for hydraulic lines. • Single five-hose bundle for grease and pressure control equipment. • Fork lift slots. • Compact, rugged design. Options

• Pressure control equipment sold separately. • Accumulator assist for hydraulic circuit. • PVC canvas cover. • Galvanized frame. • Modular add-on diesel driven air compressor. • Four point lift sling. • Control panel available in a variety of languages.

Bowen 5,000 psi Grease Injection and Hydraulic Control Unit Panel and Specs

LINE WIPER PRESSURE

STUFFING BOX GREASE PRESSURE

PRESSURE

TOOL PRESSURE

RELEASE

TOOL CATCHER GREASE

GREASE

PUMP

PUMP

1

2

DUMP CATCH

DUMP

TEST PRESSURE

DUMP

TURN TO ADJUST REGULATOR

TURN TO ADJUST REGULATOR

HIGH PRESSURE PUMP

LOW PRESSURE PUMP

AIR SUPPLY PRESSURE

Product Specifications Part Number 217200 Grease Pumps Two air-driven 100:1 ratio Aro grease pumps, 10,000 psi maximum pressure Hydraulic Pump One 9,000 psi hand pump for line wiper, stuffing box, and tool catcher control Test Pumps

Dimensions 38 inches wide x 122 inches long x 78 inches high Control Panel Color coded, engraved stainless steel and components Dry Weight of Complete Assembly 5,100 lbs including hoses, risers (9), BOP (1), and grease head (1) Hoses

One air-driven 10:1 ratio for rapid filling

Grease Injection

150 feet, 1⁄2 inch I.D., 10,000 psi

One air-driven 100:1 ratio for test pressure, 15,000 psi maximum pressure

Grease Return

150 feet, 1⁄2 inch I.D., 10,000 psi

Line Wiper

150 feet, 1⁄4 inch I.D., 5,000 psi

One 100 gallon grease tank

Stuffing Box

150 feet, 1⁄4 inch I.D., 5,000 psi

One 60 gallon return tank

Tool Catcher

150 feet, 1⁄4 inch I.D., 5,000 psi

One 30 gallon water/glycol tank

Air Supply

50 feet, 3⁄4 inch I.D., 1,250 psi

One 5 gallon hydraulic tank

Pressure Test

50 feet, 1⁄2 inch I.D., 10,000 psi

Tanks

One 20 gallon air tank

All hoses rated for –40°F to 200°F (–40°C to 93°C).

155

Bowen 5,000 and 10,000 psi Drum-Mounted Grease Injection Units

Bowen 5,000 and 10,000 psi Drum-Mounted Grease Injection Units

These economical air operated drum-mounted pumps are rated for up to 5,000 psi or 10,000 psi working pressure. The grease pump is operated directly at the attached filter/regulator/lubricator. A separate hose reel cage can be located at a different location for maximum space efficiency. Features

• Stainless steel gauges, tubing and fittings. Options

• Hose reel cage with wet center hose reels. • Drum tie-down rods. • Filter/regulator/lubricator could be mounted on truck for increased durability. • PVC canvas cover. • Galvanized hose reel frame.

Product Specifications Part Numbers 217531 for 5,000 psi working pressure 217386 for 10,000 psi working pressure Grease Pumps One air-driven 100:1 ratio Aro grease pump, 10,000 psi maximum pressure (217531) One air-driven 140:1 ratio Lincoln grease pump, 14,000 psi maximum pressure (217386) Tanks None Dimensions for Hose Reel Cage (optional) 271⁄4 inches wide x 383⁄16 inches long x 32 15⁄16 inches high Control Panel None Hoses (optional) Grease Injection

100 feet, 1⁄2 inch I.D., 10,000 psi

Grease Return

100 feet, 1⁄2 inch I.D., 10,000 psi

Jumper Hose

10 feet, 1⁄2 inch I.D., 10,000 psi

All hoses rated for –40°F to 200°F (–40°C to 93°C).

156

Bowen Portable Pressure Test Unit

TEST PORT

DUMP AUT OC LAV

E

TEST PRESSURE OFF AIR REGULATOR

HI-PRESS. PUMP

ON HI-VOL. PUMP AIR SUPPLY

Bowen Portable Pressure Test Unit

The Bowen Portable Pressure Test Unit is a lightweight, economical unit developed for pressure testing wellhead equipment in the shop or field locations. It utilizes two air-driven pumps — one for fast fill up to 1,000 psi and the other for pressuring up to 22,500 psi. Features

• Stainless steel engraved control panel. • Air-driven fill and pressure pumps. • Rugged, portable design. • Five gallon stainless steel reservoir. • Stainless steel frame construction. • Direct high pressure hose connection.

Product Specifications Part Number 154057 Pumps Air-driven high pressure pump, 22,500 psi max. pressure, fill rate 0.25 gpm Air-driven fill pump, 1,000 psi maximum pressure, fill rate 5 gpm Tanks One 5 gallon stainless steel reservoir Dimensions 18 inches wide x 22 inches long x 24 inches high Control Panel Color coded, engraved stainless steel and components Dry Weight of Complete Assembly 105 lbs Outlet Connection 1"-12 swivel nut hose connection

157

Bowen Pressure Control Equipment Transport Skid

Bowen Pressure Control Equipment Transport Skid

Bowen builds a wide variety of transport skids to move pressure control equipment to and from the job site. Storage for some equipment can be built into the grease injection skid. However, separate transport units are available for complete packages of pressure control equipment. This particular unit is designed to hold 15k equipment consisting of nine risers, a tandem grease injection control head with tandem pack-off and flow tubes, triple BOP, tool trap, tool catcher, two adapter flanges, two 55 gallon drums, and a pressure test unit. The unit is designed with corrosion resistant materials and is suitable for land or offshore use. Standard Features

• Tubular steel frame, galvanized for corrosion protection. • Modular design allows all equipment to be easily lifted out of the primary frame. • Fold-down work bench to allow assembly of grease head and flow tubes. • Riser racks slide out for easy removal of 10-foot risers • Fork lift slots. • Compact, rugged design. Options

• Pressure control equipment sold separately. • PVC canvas cover. • Sandblasted, dimet coated, epoxy enamel primer and finish. • Four point lift sling.

158

Product Specifications Part Number 216834 Dimensions 53 inches wide x 132 inches long x 75 inches high Dry Weight (without pressure control equipment) 2,630 lbs

All hoses rated for –40°F to 200°F (–40°C to 93°C).

Bowen 10 hp Air Compressor With Diesel Engine

Bowen 10 hp Air Compressor With Diesel Engine

This air compressor system is designed to supply power to Bowen’s 5k and 10k air-driven grease injectors. The unit is equipped with a 10 hp air compressor, a 15 hp diesel engine, and a 30 gallon receiver. It is capable of producing 35 scfm and 175 psi. The engine is equipped with safety devices and electric start while the compressor has a constant speed unloader for safe and efficient operation. Standard Features

• Tubular steel frame, sandblasted, dimet coated, epoxy enamel primer and finish. • Air skid can be bolted to grease skid and transported as a single unit. • Electric start diesel engine. • Safety shutdown for low oil or high temperature. • Spark arrestor muffler. • External spin on fuel filter. • Constant speed unloader for air compressor. • Fork lift slots. • Compact, rugged design.

Product Specifications Part Number 217540 Diesel Engine One electric start 15 hp air-cooled diesel engine Air Compressor One belt-driven 10 hp two-stage air compressor Receiver One 30 gallon 200 psi ASME rated vertical receiver Tank One 15 gallon fuel tank Dimensions 393⁄16 inches wide x 37 inches long x 66 inches high Dry Weight 1,000 lbs

Options

• Galvanized frame. • PVC canvas cover. • Four point lift sling.

159

Bowen Hydraulic Wireline Jars and Knuckle Joints Bowen Hydraulic Wireline Jars

Bowen Hydraulic Wireline Jars employ a patented hydraulic system similar to that used in the well known Bowen Hydraulic Rotary Jar. This system permits the operator to closely control the force of the blow over a wide range. from a light blow to one of maximum impact. These jars may be run on any measuring line or stranded wire line which does not require electrical continuity below the jar. They are particularly valuable in fishing, swabbing and permanent well completion operations The Bowen Hydraulic Wireline Jar consists essentially of a sliding mandrel within a hydraulic chamber. In the closed position, an integral piston on the lower end of the mandrel rests in the middle body cylinder. When strain is taken on the line, the top sub and mandrel are pulled upward, while the piston is impeded in its upward movement by hydraulic fluid. This fluid is restricted in it flow from above the piston by the narrow passage between the piston and the cylinder wall. Fluid flow is retarded, thereby delaying completion of the jarring stroke until sufficient strain has been taken on the line to strike a blow of required impact value. When the piston passes from the cylinder into the enlarged internal portion, fluid resistance ceases. The top sub and the mandrel then travel upward with great acceleration until the top of the piston strikes the middle body insert, transmitting the jarring force. The jar is closed after the stroke by slacking off on the line. A check valve in the piston allows free passage of fluid, permitting the jar to close freely. The 11/8", 11/4" and 11/2" O.D. jars have a two-piece middle body insert and bushing combination, designed to simplify replacement of the high pressure seal assembly. Bowen Hydraulic Wireline Jar Specifications Outside Diameter (inches)

11/8

11/4

11/2

11/2

13/4

Connections – Pin Up & Box Down

5/8 11 Thd.

15/16 10 Thd.

15/16 10 Thd.

15/16 S.R.

3/4 S.R.

7/8 S.R.

Length of Stroke (inches)

63/4 35097 10 35105 2 22709-10 1/2 22729-11 5/8

91/4 11740 10 11751 2 22709-11 1/2 11753 5/8

20 51227 12 11178 21/2 22709-15 1 22729-16 7/8

93/16 79297 11 11178 21/2 22709-15 1 22729-16 7/8

10 79297 20 15997 3 22709-17 11/2 22729-20 1

115/8 11550 30 11554 31/2 22709-21 11/4 22729-24 11/2

Complete Assembly Service Kit Mandrel Body Setting Tool Balance Piston Setting Tool

Part No. Weight Part No. Weight Part No. Weight Part No. Weight

21/8

Bowen Hydraulic Wireline Jar

Bowen Knuckle Joints

Bowen Knuckle Joints, when made up in a string of wireline tools, provide strong flexible joints to permit angular movement on the string in a crooked hole. The Bowen Knuckle Joint consists of only two parts — a pin section is formed around the ball of the box section to form an integral unit. If desired, a hole can be drilled lengthwise in the knuckle joint to permit passage of conductors.

Bowen Knuckle Joint

Bowen Knuckle Jar

Bowen Knuckle Joint Specifications Bowen Knuckle Jars

Outside Diameter (inches)

11/8

11/4

111/16

17/8

Bowen Knuckle Jars combine the functions of a knuckle joint and a short tubular jar. The socket of the pin section is formed around the box section to form an integral unit. Since the ball slides freely in the cylindrical recess, the tool when in the open position will pivot to permit angular movement of the string. If tight places are encountered, the knuckle jar can be utilized to jar with short strokes to free the string.

Connections Pin & Box

5/8 11 Thd.

15/16 10 Thd. 15/16 10 Thd.

3/4 S.R.

3/4 S.R.

148837 2

80378 3

64151 4

160

Complete Assembly

Part No. 56160 Weight 13/4

11/2 54953 21/2

Bowen Knuckle Jar Specifications Outside Diameter (inches)

11/4

11/2

Stroke (inches)

2

4

15/16 10 Thd.

15/16 10 Thd. 13996 4

Connections Pin & Box Complete Assembly

Part No. Weight

18825 3

Bowen Rope Sockets Bowen Single-Strand Rope Socket

Bowen Single-Strand Rope Sockets are designed for use with measuring lines having diameters of .062" to .092". They can also be used on stranded lines with diameters up to 3/16". Specify line size when ordering. The Single-Strand Rope Socket consists essentially of a body and a grooved bronze plug. The line is threaded through the body and wrapped around the plug in the grove provided. The plug is then pulled tightly up into the body taper. The pressure of the pin of the tool which is connected below the socket aids in wedging the plug in the body, while strain on the line keeps the plug tightly wedged in the body, eliminating the possibility of the line slipping out. Single-Strand Rope Socket

Bowen Single-Strand Rope Socket Specifications Fishing Neck OD

1

13/16

13/8

13/8

13/8

Outside Diameter

11/8

11/4

11/2

13/4

17/8

5/8

15/16

15/16

3/4

11 Thd.

10 Thd.

10 Thd.

S.R.

3/4 S.R.

.062" to

.062" to

.062" to

.062" to

.062" to

.092" 20490 13/4

3/16

3/16

3/16

3/16

14190 2

12775 21/2

25715 3

21425 4

Bottom Connection

Line Size Part No. Complete Assembly Weight

Bowen Slip-Type Rope Socket — Overload Release Type

Bowen Slip-Type Rope Sockets are designed for use with small stranded lines, through 3/8" diameter. They may be used with conductor lines, provided that electrical continuity below the rope socket is not required. This rope socket features simplicity of construction and easy assembly. It consists of a body, sub, carriage, slips and set screw. The slips are designed to cause the line to break under severe loading at a specific percentage of the full line tensile strength. Five breaking strength slips are available for 50%, 60%, 70%, 80% and 90% of line strength. The desired percent must be specified when the slips or assembly are ordered. If during the running tools become stuck, the operator is assured that the line will break at the rope socket rather than up-hole, allowing retrieval of the wireline. WARNING: The rope socket is susceptible to damage from wrench marks, corrosion. etc. which will substantially reduce its strength. Pipe wrenches should not exceed 18" and should be used only on the heavy wall portions of the rope socket body. Magnetic particle inspection is recommended on a regular basis.

Bowen Slip-Type Rope Socket

Bowen Slip-Type Rope Socket Specifications Fishing Neck OD

13/8

13/16

Outside Diameter

11/2

11/4

Bottom Connection

15/16 10 Thd.

15/16 10 Thd.

Line Size

1/8 to 1/8

Complete Assembly

Part No.

14680

1/8 to 1/4 17180

Weight

4

31/4

161

Bowen Series 160 Side Door Overshots Bowen Series 160 Side Door Overshots

Bowen recommends the use of the Series 160 Side Door Overshots when fishing for conductor line or cable tools in cased holes. These Overshots are run in on tubing or drill pipe. By removing the side door in the bowl, the line can be fed into the tool. After the line is in place, the door is put back into position as part of the bowl.

SERIES 160 SIDE DOOR OVERSHOTS

Important features of the Bowen Series 160 Side Door Overshot are: • Eliminates the necessity of cutting the line or cable. • Eliminates the possibility of lines fouling (this can take place when two lines are in the hole). • Provides more positive control than would be possible when fishing with a conventional wire line overshot.

Bowen Series 160 Side Door Overshot Specifications Maximum Catch (Spiral)

2

2

23/8

23/8

23/8

23/8

23/8

Maximum Catch (Basket)

11/2

11/2

17/8

17/8

17/8

17/8

17/8

Overshot O.D.

31/8

33/4

4

4

41/2

41/2

41/2

Top Connection

23/8 EUE Box

27/8 API Reg.

23/8 API Reg. Box 23/8 API Reg. Box Acme Str 6 thd.

23/8 API Reg. Box 23/8 API Reg Box

Part No. Weight

15959 60

C-1 1145 65

9560 70

N-9560 70

6400 195

9985 105

C-7613 105

Oversize Guide

Part No.

15959

9563

9563

7217

7217

7217

Guide Key Screw (2 Req’d)

Part No.

8181

9551

9551

6461

6461

6461

Guide Anchor Segment (4 Req’d)

Part No.

15960

9552

9552

6462

6462

6462

Guide Anchor Segment Screw

Part No.

3847

Complete Assembly

Optional Extra

9553

9553

9568

9568

9568

Maximum Catch (Spiral)

23/4

27/8

31/8

33/8

321/32

321/32

4

Maximum Catch (Basket)

21/4

23/8

23/8

27/8

31/8

31/8

31/2

Overshot O.D.

41/2

5

411/16

51/2

51/2

51/2

61/8

Top Connection

27/8 API Reg. Box 27/8 API Reg. 9900 C-7618 167 149

Complete Assembly

Part No. Weight

27/8 API Reg. Box 27/8 API Reg. Box 27/8 API Reg. Box 27/8 API Reg. Box 27/8 API Reg. Box 9965 C-5436 9920 N-9920 C-6161 139 171 177 171 206

Optional Extra Oversize Guide

Part No.

9911

—

9976

9930

9930

9930

—

Guide Key Screw (2 Req’d)

Part No.

6461

—

6461

6461

6461

6461

—

Guide Anchor Segment (4 Req’d)

Part No.

9913

—

9978

9932

9932

9932

—

Guide Anchor Segment Screw

Part No.

9933

—

9933

9933

9933

9933

—

162

Bowen Wireline Retrievers, Tubular Jars, and Sinker Bars Bowen Wireline Retrievers

Bowen Wireline Retrievers are specifically designed for recovering cut or broken single strand measuring lines or small diameter stranded lines. Since cut or broken wire line “strands” into soft coils inside the pipe, and the uppermost portions will typically be standing straight up, it is desirable to grab the line just below the break in the line. Bowen Wireline Retriever Specifications Tool O.D. (inches)

11/2

11/2

To Run In

11/2 Tubing

11/2 Tubing

23/8 Tubing

Can Be Adapted to Run In

21/16 to 2

25/8 to 27/8

27/8 to 31/2

Top Connection – Pin

15/16 10 Thd.

15/16 10 Thd.

15/16 10 Thd.

Type

Slip

Slip

Slip

Guide Type

Slotted

Plain

Slotted

18995 13

15717 13

18995 15

Complete Assembly

Part No. Weight

113/16

How to Order

Specify: (1) Name and number of assembly. (2) Tubing size to run in. (3) Any desired extras, by name and part number. RECOMMENDED SPARE PARTS: (1) 1 Guide or Skirt for Each Tubing Size (2) 6 Each Spring Lock Pins Tubular Jar Send for Technical Manual No. 8820 for Bowen Wireline Retrievers.

Bowen Tubular Jars

Bowen Sinker Bars

Bowen Sinker Bars are used with wireline tools to provide additional weight to a string of wireline tools. They are especially useful when used in conjunction with wireline hydraulic jars. By adding weight to the string, the speed of the closing operation is increased, and the jar ring blow is intensified. Bowen Sinker Bars are available in a range of sizes, lengths. and weights, with or without fishing necks, to suit any wireline operation. Top and bottom connections are designed to mate to other Bowen wireline equipment. Bowen Sinker Bar Specifications Outside Diameter Top Connection – Pin Bottom Connection – Box

1

11/8

11/4

11/2

13/4

21/8

5/8

5/8

15/16

15/16

3/4

7/8

11 Thd. 11 Thd. 10 Thd. 10 Thd. S.R. 1/8 5/8 15/16 15/16 3/4 11 Thd. 11 Thd. 10 Thd. 10 Thd. S.R.

7/8

S.R.

15789

12663

S.R.

Type (With Fishing Neck)

Wireline Retriever

Bowen Tubular Jars can be used as an up or down jar. It is particularly useful in permanent well completions, to pull both up or down as a way to aid in pulling, fishing, or gas lift operations. To jar down, the Bowen Tubular Jar is actuated either manually or by the use of a reel. It is available with either a 20" or 30" stroke.

Important features of the Tubular Jar are: • Reliable design • Diameters: 11/4" 11/2", 13/4", 21/8" • Lightweight Bowen Tubular Jar Specificatiions Outside Diameter

11/4

11/2

113/16

21/8

Top Connection – Pin

15/16

15/16

3/4

3/4

Bottom Connection – Box

10 Thd.

10 Thd.

S.R.

S.R.

How to Order

Length of Sroke (inches)

20

20

20

20

Specify: (1) Name and number of assembly. (2) Length, up to 6 feet. (3) Outside diameter. (4) Type (with or without fishing neck).

Top Connection

Complete Assembly

Part No.

35600

12660

12661

12662

Complete Assembly

Part No. Weight

15/16

15/16

15/16

—

12350 14

10689 161/4

18995 24

— 351/2

How to Order

Specify: (1) Name and number of assembly or part (2) Top and bottom connections. (3) Length of stroke: 20 or 30 inches. Sinker Bar With Fishing Neck

Sinker Bar Without Fishing Neck

163

Notes

164