Water Cad

WaterCAD V8 XM Edition

Bentley Product Portfolio Water • WaterGEMS • WaterCAD • HAMMER • SCADAConnect

Sewer Haestad Methods Solutions

• SewerGEMS • SewerCAD

Storm • CivilStorm • PondPack • StormCAD • CulvertMaster • FlowMaster

Water Modeling Firsts • 1983: KYPIPE – 1st IBM-PC fully capable implementation of the mainframe solution for water distribution modeling • 1991: Cybernet – 1st AutoCAD-based water distribution modeling solution • 1996: WaterCAD – 1st commercial Windows stand-alone water distribution modeling solution • 2002: WaterGEMS – 1st ArcGIS 8x water distribution modeling solution • 2006: WaterGEMS V8 XM Edition – 1st MicroStation water distribution modeling solution • And: WaterGEMS V8 XM Edition – 1st fully unified cross-platform water distribution modeling solution

WaterCAD & WaterGEMS

WaterGEMS V8 XM Edition

ArcGIS platform WaterCAD V8

LoadBuilder Windows Stand-alone

Terrain Extraction (TRex) ModelBuilder

MicroStation platform

Included Available

Darwin Calibrator Darwin Designer

AutoCAD platform

XM Edition

Skelebrator

HAMMER and SCADAConnect – Available Add-on

Add-ons

WaterCAD Water distribution design and modeling Automated fire flow analysis Source trace and water age analysis Easy-to-use native layout tools

Active topology alternatives Variable speed pumping Constituent water quality analysis Drawing review tools

• Stand-Alone, Microstation and AutoCAD environments • Quick model building from any data source • Easy-to-use layout and editing tools

System head & hydrant curves Tank mixing models Rule-based & logical controls Elevation Extraction (AutoCAD version) Leakage and sprinkler modeling

• Unrivaled hydraulic analysis features • Stunning result presentation tools

Capital cost & energy analysis Comprehensive demand management Unidirectional flushing modeling Shapefile synchronized connections CAD to model automated conversion Statistical result analysis

Persistent database connections Scaled and schematic layout Sub model management Multi layer backgrounds for model layout Integration with HAMMER for transient analysis Animated pump and head loss curves

WaterCAD Features • • • • • • • • • • •

Steady-State Analysis Extended-Period Simulation (EPS) Constituent-Concentration Analysis Source Tracing Criticality Analysis Tank-Mixing Analysis Water-Age Analysis Fire-Flow Analysis Variable-Speed Pumping Pressure-Dependent Demands Scenario Modeling-Based Unidirectional Flushing

WaterCAD V8 XM Edition

Easy-to-use Interface • • • • • • • • • • •

Stand-alone interface MicroStation interface AutoCAD interface (add on) Multi background-layer support CAD, GIS & Database Unlimited undo and redo Scaled, schematic & hybrid environments Element morphing, splitting & reconnection Element prototypes Aerial view and dynamic zooming Named views WaterGEMS V8 XM Edition ArcGIS interface shown

Model Building • Model Builder – Build your model from any external data source • TRex – Extract Elevations from multiple digital formats • LoadBuilder – Add demands to your system using one of several demand allocation features

Scenarios Management • Calculate multiple “What if” situations • Alternatives • Parent child relationship

Reporting Results • • • • • • •

Reports Tabular Reports w/ Flex Tables Profiles Contouring Thematic Mapping Property-Based Annotation Property-Based Color Coding and Symbology

WaterCAD Modules 180.0

1:1 Correlation Flow T est 1 Flow T est 2 Flow T est 3

160.0 140.0 120.0 100.0 80.0 60.0

Available for WaterCAD Included with WaterGEMS

Darwin Calibrator

40.0 20.0 0.0 0.0

40.0

80.0

120.0

160.0

Automated model calibration

Darwin Designer Optimized and automated network design.

Skelebrator Hydraulic-smart network reduction

HAMMER Water Surge and Transient An

Darwin Calibrator 180.0

Automated calibration

1:1 Correlation Flow T est 1 Flow T est 2 Flow T est 3

160.0 140.0 120.0 100.0 80.0 60.0 40.0

Streamline the time-consuming model calibration process and make sure your decisions are based

20.0 0.0 0.0

40.0

80.0

120.0

160.0

on a model that truly reflects the real world.

1. Enter multiple field measurements for calibration 2. Let Darwin generate millions of possible solutions 3. Create a calibrated model using optimum values for pipe roughness, junction demands and element status

Darwin Designer Automated design Evaluate thousands of design and rehabilitation alternatives that meet your hydraulic constraints, maximizing hydraulic performance and savings to your Capital Investment Program (CIP).

1. Enter design requirements

(Max./Min. pressures & velocities)

2. Assign cost tables or functions 3. Determine optimization objective

(Cost, benefit or trade-of)

4. Let Darwin find thousands of valid design solutions 5. Choose an optimum solution for implementation

HAMMER Transient analysis and water hammer modeling • Avoid catastrophic failure of pipes & equipment • Use the rigorous Method of Characteristics • Model any transient event • Simulate any surge protection device Prevent system damage

• Complete integration with WaterGEMS/CAD

Develop cost-effective surge control strategies Trim construction and O&M budgets Model any surge protection device Minimize wear and tear on pipes Simulate any transient condition Design and operate with greater reliability Eliminate costly over design Ensure the longevity of your water system Prepare for power failures Protect your operators Improve water quality Minimize service interruptions

References • There are currently over 40,000 seats of Haestad Methods water distribution modeling products in use today. • The largest municipalities in the US and the world use Haestad Methods water distribution software including: New York City, NY

Phoenix, AZ

St Louis, MO

Baltimore, MD

Washington, DC

Gwinnett County, GA

Anne Arundel County, MD

Tacoma, WA

Tucson, AZ

Tampa, FL

American Water, US

Brisbane, Australia

United Water, US

Athens, Greece

Beijing, China

SELECT Benefits • Network License • 24 x 7 Technical Support − Live Meeting Assistance

• New versions! Plus updates • Access to knowledgebase • Home-use license

Conclusion Why Choose Bentley’s Haestad Solutions? • 27 Years Experience

• Large R&D Staff • Offer Full Suite of Software:

−Water - Sewer - Stormwater • Common Interfaces • CAD, GIS, or Stand Alone • More new versions & features • Many Users = Higher Quality Software • New Releases = Higher Productivity

Client Feedback Here’s what they say about Haestad methods…. “Haestad Methods is a first class organization, and they really took an interest in ensuring that we were getting the most out of using our WaterGEMS software.” Texarkana Water Utilities “The software helped the students bridge the gap between the principles they learned in earlier courses and real projects they can see every day driving to school.” Mississippi State University “Our WaterCAD model gave us an excellent understanding of our system, so we were able to make good decisions and have a fast reaction time.” Los Alamos County Utilities “Using scenarios and reporting tools, SewerCAD was able to thematically display the hotspots in the system. Then, the automated design tools let us develop augmentations to resolve the bottlenecks. It was a real time saver for us.” Brisbane Water (Australia) “Haestad Methods should be commended for putting together a workshop of this quality. This course should be mandatory for anyone modeling water systems.” Advanced Engineering “Using your product has helped us to quickly and accurately review various alternatives, so we may provide our customers with a quality yet economical design.” RDK Engineering Inc “Technical software is only as good as its technical support-Haestad excels at both.” Elliot & Garver Bentley Systems serves hundreds-of-thousands of clients worldwide. This presentation represented only a small portion of client feedback.

WaterCAD V8 XM Edition