WalTer T6 2014 R1 User Guide 102014
Short Description
WalTer T6 Wifi Cellular Employee Time Clock/Time Keeper User Manual...
Description
WalTer T6 User Guide
EPAY Systems Customer Support 877.800.3729, Ext. 2 www.EPAYsystems.com
WalTer T6 User Guide TABLE OF CONTENTS WalTer T6 Specifications What’s what? Supervisor Menu
...........................................................
.........................................................................
Employee Menu
...................................................................
..................................................................
Supervisor Registration
...........................................................
Employee Registration
4 4 9
10 11
.........................................................
24
........................................................................
25
.....................................................................................
26
Using the Clock Error
Employee Message Recording Time Clock IN Meal Break Clock OUT -
-
..............................................................
...............................................................................
...........................................................................
...........................................................................
Clock OUT Prompts Change Language -
.............................................................
................................................................
Work/Pay Info PTO Menu PTO Request
.......................................................................
............................................................................
........................................................................
PTO View and Balance
........................................................
̶ 2 ̶
27 28 30 32 33 34 35 38 39 41
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide TABLE OF CONTENTS WalTer T6 Specifications What’s what? Supervisor Menu
...........................................................
.........................................................................
Employee Menu
...................................................................
..................................................................
Supervisor Registration
...........................................................
Employee Registration
4 4 9
10 11
.........................................................
24
........................................................................
25
.....................................................................................
26
Using the Clock Error
Employee Message Recording Time Clock IN Meal Break Clock OUT -
-
..............................................................
...............................................................................
...........................................................................
...........................................................................
Clock OUT Prompts Change Language -
.............................................................
................................................................
Work/Pay Info PTO Menu PTO Request
.......................................................................
............................................................................
........................................................................
PTO View and Balance
........................................................
̶ 2 ̶
27 28 30 32 33 34 35 38 39 41
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide TABLE OF CONTENTS Supervisor Action at Clock IN -
Mismatched Fingerprint Open Punches PTO Approval
.................................................
44
.....................................................................
45 46
.......................................................................
47
.......................................................
Supervisor Action from Administrative Menu Manage Attendance Fingerprint Approval View Attendance Order Pay Cards
........................
.............................................................
.............................................................
..................................................................
..................................................................
49 49 53 55 56
October 2014
̶ 3 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Specifications
WalTer T6 Technical Specifications Controller Board: Microsoft Windows CE 6.0 .NET Operating System 512MB onboard DRAM 256MB DOM (expandable up to 1GB) Disk On Module Six USB Ports (3 internal, 3 external) & Six RS232 Serial Ports Custom keypads, Camera, Fingerprint Reader, Thermal Printer, MSR, Socket Modem, GPRS Modem Support -
LCD Display 10.1” WSVGA TFT Panel size 222mmX125mm Resolution: 1024 x576 pixels Thermal Printer: Printing width: 72mm Standard paper size: 31/8"W x 3.0" DIA x 230’L Card Reader: ANSI/ISO Magnetic stripe standard standard Biometric Reader: Scanner Type: Optical Scanner (Infra Red LED) Capture Area Size: Size: 14.9mm x 17.8mm Resolution: 480dpi Plastic Enclosure and Mounting Bracket: ABS ejection ejection molded enclosure Interior grounding for EMC protection Detachable printer door Printer roller for smooth paper release LCD protected by tempered glass Optional touch screen Optional UPS support -
Dimensions: 15 1/2”H x 12”W x 4”D Weight: 8.0 lbs Power Supply: Input Voltage Range—90 264VAC @ 47 63 Hz Output Voltage 5V DC Output—42.5W -
-
̶ 4 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Specifications
Land Line Modem: External RJ11 jack for standard landline connection Transfer rate—56 Kbps ITU Standard Supported protocols: ITU V.22, ITU V.22bis, ITU V.32, ITU V.32bis, ITU V.34, ITU V.90, ITU V.92 LAN: Ethernet with an integrated RJ45 connector accessible externally Environmental & Dynamic Requirements: Operating temperature: 0 40ºC Humidity: 90% RH Device shipping package meets Mil Spec—810E, common carrier transportation standard -
Regulatory Compliance: Tested and certified in accordance with FCC standard requirements for Information Technology Equipment (ITC)
WalT alTer er T6 Operational Ope rational Specifications Synchronization: Synch Method: Ethernet connection via LAN Networks, WiFi capable, Cellular, and local ISP dialup via analog Land Line Modem. Synch Times: Up to 12 times per day, scheduled by customer. Smart Sync for Ethernet and WiFi allows for real time punch data to be sent over. For dialup, if line is busy, makes another attempt after 5 minutes making 3 attempts. Synch Duration: Typically 1 2 minutes for every 25 empl oyees for each scheduled synch and occasionally up to one hour to update software. Dialup Phone Numbers: Local and toll free dialup phone numbers Server IP: 204.93.130.16 Server Port: 0443 Updater Port: 0443 -
-
-
-
Security: Data:All data files encrypted Backup: Double backed up data files on device Web server backup Tape archive and backup Tracking: Real time audit of all punch changes Communication: TCP/IP{ SSL Secured layer (128 bit encrypted) Installation: Requirements: 24/7 access to electricity Connectivity: share friendly analog phone line, LAN network line, WiFi network or Wireless GPRS communication
̶ 5 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Getting Started
Getting Started Start here! Learn what is what on the WalTer T6 Timeclock.
Cell Antenna capability
Camera Card Reader
Color and touch screen
Durable keypad
Fingerprint Reader
Thermal Printer
̶ 6 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Getting Started
Top of the screen displays: Connection Type Asset ID Date and time of last synchronization Customer Support Phone Number
Middle of the screen displays: Date and Time Simple instructions to Login
Bottom of the screen displays: Location device is assigned Info button Change Language button
̶ 7 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Getting Started
Press white button below OR the word on the screen:
INFO CHANGE LANGUAGE
INFO
CHANGE LANGUAGE
Displays:
Asset ID
Changes display for all employees:
Application Version
English
Timezone
Espanol
Last Synch Time
Polski
Signal Strength
SIM Card No.
IMEI
Free Memory
Press the exit.
French Choose language or to exit.
button to Why do this? Employees who use this clock all speak the same language. Please note this can be set per employee too.
Why look here? Support may ask you to press this to help if there is an issue. Looking at this doesn’t change anything.
̶ 8 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Getting Started
Supervisor Main Menu Depending on the level of access, the Supervisor or Employee Main Menu will display after logging in. The primary difference between them is the Supervisor access to the Administrative Menu. Other differences may be noticed based on the site’s con figur ation. An example might include—Lunch breaks, as a punch type, not activated.
Supervisor Menu Option for Administrative Menu displays.
̶ 9 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Getting Started
Employee Main Menu Depending on the level of access, the Supervisor or Employee Main Menu will display after logging in. The primary difference between them is the Supervisor access to the Administrative Menu. Other differences may be noticed based on the site’s con figur ation. An example might include—Lunch breaks, as a punch type, not activated.
Employee Menu Option for Administrative Menu does not display.
̶ 10 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Registration
Supervisor Registration In order to register all employees at the WalTer, the Supervisor has to register first. Follow the steps below.
Type the Employee Number assigned using the keypad, and press the
key.
This displays the Supervisor Main Menu
Note: If your ID number does not bring you to the Supervisor Menu, check you used the correct employee number. Contact System Administrator or Payroll for help.
At the Supervisor Menu, choose option for Administrative Menu on the keypad or screen.
̶ 11 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Registration
Choose the option for Modify Existing or Register New Employee on the keypad or screen.
Use the on screen keyboard to -
type the Employee Number. Press
when complete.
̶ 12 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Registration
The prompts now guide you through recording your fingerprint so you can clock in and do all Supervisor tasks. Choose a finger on your left hand to register. Index finger is normally used. When the finger is properly placed in the reader, press the
key to take the image.
̶ 13 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Registration
You will take three images of your fingerprint. Press the key after each. If you get a red fingerprint notice, reposition your finger and take the image again.
You will take three images of your fingerprint. Press the key after each. This is an example of a bad fingerprint image. Reposition your finger and take it again.
̶ 14 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Registration
Default Department and Language
After the fingerprint registration choose the Supervisor’s default department/location (naming convention depends on your company’s configuration).
If employee works more than one job/department, check those they will work.
Change Language to the default for the employee.
̶ 15 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Registration
Registering Supervisor: Payment Method This only applies for those companies using Insight Pay cards.
Once the Language is selected, the Supervisor’s payment method is chosen. Options here will depend on your state and company requirements.
NOTE: These will onl y apply if the company is using Insight Pay cards.
Direct Deposit to a Bank Account
Receive a Paper Paycheck
If the employee will have
Employee chooses to
their payroll directly
receive a paper
deposited into a bank
paycheck. A warning
account. They must have
displays about the length
a bank routing and
of time it can take to get
account number to
and deposit a paper
complete.
New Pay Card If the employee has a Pay Card that will be registered at the T6 and payroll will be automatically added to the card.
̶ 16 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Registration
Payment Method Pay Card
After the fingerprint registration choose the employee’s payment method. Choose New Pay Card on screen or keypad.
Not every company uses scan cards as back up, nor pay cards for their employees. Only use the option(s) that apply in your circumstance. Follow same procedure to register back up swipe card.
A strongly worded USA Patriot Act message displays. The employee agrees they have been offered another payment method. Press
the on screen or key-
pad to continue OR the
to make another
choice.
̶ 17 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Registration
The Supervisor now swipes the card through the reader. With the back toward the wall and the bar code in the reader. An acknowledgement displays. Press
once to return to
Administrative Menu or twice to Home Menu.
When swiping cards through WalTer, be certain the bar code is in the reader and the back of the card faces the wall.
̶ 18 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Registration
Payment Method Direct Deposit After the fingerprint registration choose the payment method. Choose Direct Deposit to a Bank Account on screen or keypad.
Supervisor has to have bank account information for the employee with them at this time. Routing number and account number are on every check or deposit slip.
A strongly worded USA Patriot Act message displays. The Supervisor agrees they have been offered another payment method. Press the
on screen or key-
pad to continue OR the
to make another
choice Use the on screen keyboard or keypad to enter the banking information. Press the
key
to submit the information.
̶ 19 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Registration
Payment Method Paper Paycheck After the fingerprint registration choose the employee’s payment method. Choose Receive a Paper Paycheck on screen or keypad.
A strongly worded USA Patriot Act message displays. The Supervisor agrees they have been offered another payment method. Press the on screen or keypad to continue OR the choice Press the
to make another
key to submit the
information.
̶ 20 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Registration
Registering Supervisor: Personal Information This applies only to those companies using Insight Pay cards. Use the on screen keyboard to complete the fields. Use a capped pen to type for increased accuracy. -
NOTE: These will onl y apply if the company is using Insight Pay cards. You will type the name again.
Type the data into the field and press White keys for UP, DOWN, PREVIOUS or NEXT. Press Return after completing the field. Keying is similar to a smart phone or other keyboard. Remember to press
when
complete to save.
Press
on keypad or screen
to return to Administrative Menu or several times to return to Home Menu
̶ 21 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Pay or Swipe Card
Registering Supervisor: Assign Pay or Swipe Assigning Pay Cards only applies to those companies using Insight Pay cards. Swipe cards can apply to all. Login to Administrative Menu. Choose the option for Modify Existing or Register New Employee on the keypad or screen.
NOTE: Swipe and Pay cards may not be reissued to other employees. They are single issue.
Use the on screen keyboard to choose the employee. -
Press
when complete.
Choose New Pay Card to add a swipe card for the employee. Swipe the card from top to bottom with the strip in the reader and facing the wall.
You selected Bill Smith [21546789]
Re-register employee New Swipe Card New Pay Card
̶ 22 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Registration
The screen will prompt you to Swipe your Pay Card. Be certain to put the strip in the reader with the back of the card toward the wall, passing it through from top to bottom.
Swipe your Pay Card
NOTE: These will only ap ply if the company is using Insight pay cards.
A success message displays. If not, re swipe the card. Continue with other cards as needed. -
Bill Smith [21546789] card registration successful
Press on keypad or screen to return to Administrative Menu or several times to return to Home Menu
NOTE: Follow same process to register swipe cards. These are backup to finger print
̶ 23 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Employee Registration
Registering Employee(s):
The Supervisor registers the employees using the same steps detailed starting on page 11. It is important to remember to have employee number and all details ready when starting the registration process.
̶ 24 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Using the Clock
Using the WalTer T6: Recording Time This applies to Supervisors and Employees
Place the registered finger on the fingerprint reader and type the Employee Number if prompted, on the keypad and press the key.
NOTE: Supervis ors m ay be prompted to approve mismatched punches or PTO requests prior to punching. Press the button to move forward and punch. Supervisory actions will be WalTer will take an image of the fingerprint and match it with the points for the employee clocking in. If the points match it will move forward. If the don’t match, it will read “Fingerprint mismatch”. Depending on the configuration, it may allow up to three tries. Otherwise it will continue and allow the punch noting the mismatch and will require Supervisor approval.
̶ 25 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Error
Using the WalTer T6: Error while clocking
If the fingerprint doesn’t match any on file, an error displays. Check correct finger is used and properly placed. Check finger is clean and warm and not overly dry.
NOTE: It may take up to three tries and may take a photo, depending on configu-
Stand in front of the clock and press on the keypad. You’ll see your picture. Your punch is registered. A Supervisor will approve later.
̶ 26 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Message
Using the WalTer T6: Employee Message
After registering the fingerprint, the employee may see a message displayed, requiring action. Sample to right. Accept
Press to acknowledge receipt of the message or ignore it.
Cancel
to See your Supervisor before end of shift to sign W4 forms.
NOTE: Either r esponse is recorded. You may be able to use the on-screen keyboard to write a response as needed.
̶ 27 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Using the Clock
Using the WalTer T6: Recording Time This applies to Supervisors and Employees
Press the number on screen or keypad for the action to take: Clock IN Clock OUT Change Language Lunch Break After completing the Clock action, an additional menu may display, asking for further choices for Department, Job or Work Order, depending on how Blueforce is configured. Defaults are the employee home units.
NOTE: Supervis ors may be prompted to approve mismatched punches or PTO requests prior to punching.
A reminder of your probable next punch action may display at the bottom of the screen.
Press the button to move forward and punch. Supervisory actions will be covered in later pages. The main Employee Menu may display additional options, depending on how the clock is configured. The main actions to take remain the same: Clock IN Clock OUT Change Language Lunch Break
̶ 28 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Clock IN
Using the WalTer T6: Recording Time This applies to Supervisors and Employees
Choose the task to work, if prompted, using the keypad or tapping the screen. Default task is marked with a red asterisk.
NOTE: All prom pts depend on the configuration in Blueforce and the employee defaults.
The Clock action is confirmed and the display returns to the Main Clock Menu.
̶ 29 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Start Lunch Break
Using the WalTer T6: Lunch Break
Press the number on screen or keypad for the action to take: Lunch Break After completing the Clock action, an additional menu may display, asking if you worked safely. See Clock OUT section for details on Safety Question.
NOTE: Supervis ors may be prompted to approve mismatched punches or PTO requests prior to punching. Press the button to move forward and punch. Supervisory actions will be covered in later pages.
Your site may not use Lunch Break punching. This is determined by the configuration at your site.
To start Lunch Break choose: Start Lunch Break Confirmation will display. If your clock is configured to ask Safety Question, it will ask here. If configured for prompts will ask here. Covered in following pages.
̶ 30 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Start Lunch Break
Using the WalTer T6: Lunch Break
Press the number on screen or keypad for the action to take: Lunch Break After completing the Clock action, an additional menu may display, asking if you worked safely. See Clock OUT section for details on Safety Question.
NOTE: Supervis ors may be prompted to approve mismatched punches or PTO requests prior to punching. Press the button to move forward and punch. Supervisory actions will be covered in later pages.
Your site may not use Lunch Break punching. This is determined by the configuration at your site.
To end Lunch Break choose: End Lunch Break You may be asked to choose Department/Site or Job as during Clock IN. Choose as appropriate for your hours worked after lunch.
̶ 31 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Clock OUT -
Using the WalTer T6: Clock OUT -
Safety Question depends on the configuration of your site. Other questions may be asked and follow the same pattern to answer.
Press the number on screen or keypad for the action to take: Clock OUT An additional menu may display, asking if you worked safely.
-
NOTE: Employees m ight be prompted to input additional data at a clock out for the day or lunch. See the following pages for that description. Supervisors may be prompted to approve mismatched punches or PTO requests prior to punching. Press the button to move forward and punch. Supervisory actions will be covered in later pages.
You may be prompted to answer a Safety Question: Press the key on screen or keypad if you had a safe working day. Press if
you had a safety
issue. Be certain to report to your manager or supervisor as it suggests. Confirmation of your Clock OUT displays.
-
̶ 32 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Clock OUT Prompts -
-
Using the WalTer T6: Clock OUT– Prompts -
Additional prompts can be configured to prompt on any out punch for specific Paygroups. Up to nine prompts are available and they can be configured to read as your company needs. In the following example, Tips and Mileage are required entries while Travel Time is optional. The Safety Question follows any prompts.
Press the number on screen or keypad for the action to take, in this example: *Mileage Entry *Tip Amount Travel Time A red asterisk * marks required fields.
NOTE: Up to 9 prompt s are possible. Each prompt can be configured to be what’s needed for the business and em ployee.
Press the button to move forward and complete the punch. Press the key to cancel and re enter. -
If the Safety Question is activated, you’ll see the question next. If not, confirmation of your Clock OUT displays. -
̶ 33 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Change Language
Using the WalTer T6: Change Language This applies to Supervisors and Employees
After using your finger and/or Employee Number to access the clock, to change the language of all prompts you will see, choose the option for Change Language on sc reen or keypad.
The language chosen here is for all displays: English Spanish Polish French (Canadian) Choose the number on screen or keypad for the language needed. You are returned to the Main Employee Menu.
̶ 34 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Work/Pay Information
Using the WalTer T6: Work/Pay Information This applies to Supervisors and Employees
After using your finger and/or Employee Number to access the clock, to review Work/Pay Information, choose the option for Work/Pay Information on screen or keypad.
The options here allow you to view and/or print information relating to your hours and pay card balance.
̶ 35 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Work/Pay Information
Using the WalTer T6: Work/Pay Information This applies to Supervisors and Employees
You will have options to display and/or print choices that apply to you and are configured at the site.
View pay stub or work report If the employee payroll information is sent to Blueforce and the clock, this will allow viewing/printing of the paystub. If it’s not sent, this item will be dim and not selectable.
View Attendance Two options are available: View Actual Time Stamps View Rounded Time Stamps To view punches by actual or rounded times.
̶ 36 ̶
View Pay Card Balance This only applies if you have an Insight Paycard. Swipe the card through the reader to the right with the bar code in the slot and the back of the card toward the wall. Your balance will display. Be cautious about bystanders.
View/Print Timesheets You may view or print the total hours related to any pay period available here. You may also review and approve them depending on your configuration.
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Paycard Information
Using the WalTer T6: Paycard Information This applies to those using Insight paycards
You will have options to display and/or print paycard balances. Be mindful of surroundings when displaying balance.
Card Number: ********3467 Balance Amount: $2,560.50
Your Pay Card Balance: Account:********3467 Balance: $2560.50 Thank you. =========================== Printed on 03/30/2012 At 12:15 PM By Bob Hill
Example of printed Pay card balance.
̶ 37 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
PTO Menu
Using the WalTer T6: PTO Menu This applies to Supervisors and Employees
After using your finger and/or Employee Number to access the clock, to request PTO, choose the option for PTO Menu on screen or keypad.
The options here allow you to Request PTO, view your PTO Requests and PTO Balance. To Request PTO choose that option on screen or keypad.
̶ 38 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
PTO Menu
Using the WalTer T6: PTO Menu—Request PTO This applies to Supervisors and Employees
Use the white keys to move UP or DOWN and choose the type of PTO you are to request. Press
the key to Save the
PTO type.
Type the Start Date and then the End Date of the request. Use the white keys to move between fields. Type the Hours Per Day you are requesting. The Total Hours will calculate. Press the
key to Save the
PTO request or
to cancel before submitting.
̶ 39 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
PTO Menu
Using the WalTer T6: PTO Menu—Request PTO This applies to Supervisors and Employees
Use the white keys to move UP or DOWN and choose he type of PTO you are to request. Press the
key to Save the
PTO type.
Type the Start Date and then the End Date of the request. Use the white keys to move between fields. Type the Hours Per Day you are requesting. The Total Hours will calculate. Press the
key to Save the
PTO request or
to cancel submission.
̶ 40 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
PTO Menu
Using the WalTer T6: PTO Menu—View & Balance This applies to Supervisors and Employees
After using your finger and/or Employee Number to access the clock, to request PTO, choose the option for PTO Menu on screen or keypad.
The options here allow you to Request PTO, view your PTO Requests and PTO Balance. To view PTO Requests, choose that option on screen or keypad.
̶ 41 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
PTO Menu
Using the WalTer T6: PTO Menu—View & Balance This applies to Supervisors and Employees
Use the white keys to move UP or DOWN and choose the PTO request to edit. Press the key to Edit the request. Follow the steps from Request PTO pages to edit.
NOTE: You may onl y edit requests that are not already approved or denied. To change approved requests, talk to your supervisor.
To Print PTO requests press the key. To Exit back to the main Employee Menu, press the key.
̶ 42 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
PTO Menu
Using the WalTer T6: PTO Menu—View & Balance This applies to Supervisors and Employees
To view your PTO Balance, choose that option on screen or keypad from the PTO Menu.
To Print PTO balances press the key. The balances display hours allocated, used and balance by date. Use the white keys to move UP and Down. To Exit back to the main Employee Menu, press the key.
̶ 43 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Action at Clock IN
Supervisor Clock IN Prompts: Mismatched Fingerprints After a Supervisor logs in, if there are mismatched fingerprints to approve, there will be a prompt to review/approve all or selectively. To move past this to Clock IN, press the to handle these later.
To handle at login, mismatched fingerprints can be approved selectively or all at once. Reviewing them selectively gives the opportunity to see who is having issues and how often. Use the white keys at the bottom of the screen to Approve All, Approve Selected Row and move UP and DOWN through the displayed punches. Press to Edit a row or
to Exit to the
Administrative Menu.
̶ 44 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Action at Clock IN
Supervisor Clock IN Prompts: PTO Approval
After a Supervisor logs in, if there are PTO requests to approve, there will be a prompt to Approve Now or to move past this to Clock IN, press the
to handle these
later.
To handle at login, PTO Approval is done one line at a time. Use the white keys at the bottom of the screen to APPROVE SELECTED ROW or REJECT and move UP and DOWN through the displayed requests. Press to Exit to the Administrative Menu or Clock IN.
̶ 45 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Action at Clock IN
Supervisor Clock IN Prompts: Open Punches
After a Supervisor logs in, if there are Open Punches to correct, there will be a prompt to Approve Now or
to move past this to
Clock IN, press the to handle
To handle at login, Open Punches are done one line at a time. Use the white keys at the bottom of the screen to move UP and DOWN through the punches. Press
to Edit the punch
and then approve. Press
to Exit to the Administrative Menu or Clock IN.
̶ 46 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor PTO Approval
Supervisor: PTO Approval Access from Administrative Menu After a Supervisor logs in, choose Administrative Menu.
Choose Approve PTO Request from t he menu.
̶ 47 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor PTO Approval
Supervisor: PTO Approval Access from Administrative Menu PTO Requests for employees assigned to the Supervisor display. Use the white keys at the bottom of the screen to APPROVE SELECTED ROW or REJECT and move UP and DOWN through the displayed requests. Press
to Exit to the Administrative Menu.
̶ 48 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Manage Attendance
Supervisor: Manage Attendance Access from Administrative Menu After a Supervisor logs in, choose Administrative Menu.
Choose Manage Attendance from the menu.
NOTE: Modify Existi ng or register New Employee is covered at the beginning of this document. Settings and Diagnostic Menu is covered in the WalTer T6 Configuration and Employee Registration Guide available on -line in Blueforce.
̶ 49 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Manage Attendance
Supervisor: Manage Attendance– Edit/Add Access from Administrative Menu To edit multiple punches, choose Edit Clock IN/Clock OUT(s). You will then choose the site -
-
group from those you have access to editing.
Use the white keys at the bottom of the screen to move UP and DOWN through the punches. Press
to Edit the punch and
then approve. Press to Exit to the Administrative Menu or twice back to Main Menu.
̶ 50 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Manage Attendance
Supervisor: Manage Attendance–Create Clock IN Access from Administrative Menu -
To add a missing punch, choose Create Clock IN. You will then choose the site group from those -
you have access to editing.
Use the white keys at the bottom of the screen to move UP and DOWN through the punches. Press
to Edit the punch and
then approve. Press to Exit to the Administrative Menu or twice back to Main Menu.
̶ 51 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Manage Attendance
Supervisor: Manage Attendance–Edits Access from Administrative Menu Once you choose the site group from those you have access to editing, choose the record to edit.
Use the white keys at the bottom of the screen to change DATE/TIME, from AM/PM and to move to the NEXT record. Press
to Save the edited
record. Press
to Exit to the
Administrative Menu or twice back to Main Menu.
̶ 52 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Fingerprint Approval
Supervisor: Fingerprint Approval Access from Administrative Menu After a Supervisor logs in, choose Administrative Menu.
Choose Approve Mismatched Fingerprint from the menu.
̶ 53 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Fingerprint Approval
If there are mismatched fingerprints to approve for employees assigned to the Supervisor, there will be a prompt to for the number to approve. Choose to Approve now selectively to do one at a time, or Approve All.
Reviewing fingerprints selectively gives the opportunity to see who is having issues and how often. Use the white keys at the bottom of the screen to Approve All, Approve Selected Row and move UP and DOWN through the displayed punches. Press or
to Edit a row to Exit to the Administrative Menu.
̶ 54 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
WalTer T6 User Guide
Supervisor Manage Attendance
Supervisor: Manage Attendance–View Attendance Access from Administrative Menu
To view records, choose View Attendance. You will then choose the site group from those you have access to editing. You will also choose between Actual and Rounded Time Stamps to view.
Use the white keys at the bottom of the screen to move UP and DOWN through the records or between days. Press
to Edit the punch and
then approve. Press to Exit to the Administrative Menu or twice back to Main Menu.
̶ 55 ̶
Customer Support: 1.877.800.3729x2 www.EPAYsystems.com
View more...
Comments
