Varios Proyectos

Project: Stool Katarina

Page 1 of 7

Stool Katarina

This is one of the free prize-winning projects. The main idea is to send your suggestions for making and assembling this stool in the STOOL KATARINA topic in the Forum section, or you can write comments on other people suggestions. The most important thing when making this project is to cut the items precisely, and drill the holes on the Seat Boards (item 1), Legs (item 2) and Paws (item 3) with great accuracy. You can successfully drill the holes in many ways – send us your suggestions about that, and the best-suggested works will be rewarded by the gift-projects by the author’s choice. Of course, you will decide which solution is the best. Stool Katarina topic is now open on the Forum section – please send your suggestions and comments there. To apply your project for a reward, you must send a few photos along with the written text as a proof that you have made this project or a similar project by yourself. You can use various types of wood to make this project. We recommend purchasing some hard wood with a nice, interesting texture like teak, ash, beech, cedar, birch, cherry, maple, oak, walnut, etc. If you are planning to paint this seat, the texture of wood is not important. Make all the items precisely by the measurements given on particular 2D drawings. The measurements are given in millimeters, and the measurements in inches are given in brakes (1 inch = 25, 4 mm).

Project from www.craftsmanspace.com

Parts List

Project from www.craftsmanspace.com

Project: Stool Katarina

Page 2 of 7

Assembly Drawing

Project from www.craftsmanspace.com

Project: Stool Katarina

Page 3 of 7

Project from www.craftsmanspace.com

Project: Stool Katarina

Page 4 of 7

Project from www.craftsmanspace.com

Project: Stool Katarina

Page 5 of 7

Project from www.craftsmanspace.com

Project: Stool Katarina

Page 6 of 7

Project from www.craftsmanspace.com

Project: Stool Katarina

Page 7 of 7

Project: Lager Complet

Page 1 of 37

Lager Complet

Carefully make all the parts by following the measurements given on particular pictures. The measurements are given in millimeters, and the measurements given in inches are in brakes (1 inch = 25, 4 mm). You can use various types of wood, but we recommend birch, cedar, walnut, beech, maple or alder.

Project from www.craftsmanspace.com

Subassembly list

Project from www.craftsmanspace.com

Project: Lager Complet

Page 2 of 37

1. Table 2D Documentation Parts List

Project from www.craftsmanspace.com

Project: Lager Complet

Page 3 of 37

Assembly drawing

Project from www.craftsmanspace.com

Project: Lager Complet

Page 4 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 5 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 6 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 7 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 8 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 9 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 10 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 11 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 12 of 37

2. Bench 2D Documentation Parts List

Project from www.craftsmanspace.com

Project: Lager Complet

Page 13 of 37

Assembly drawing

Project from www.craftsmanspace.com

Project: Lager Complet

Page 14 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 15 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 16 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 17 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 18 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 19 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 20 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 21 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 22 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 23 of 37

Project from www.craftsmanspace.com

Project: Lager Complet

Page 24 of 37

Project: Lager Complet

Page 25 of 37

Assemblage Instruction 1. TABLE 1. Carefully put Leg 2 (item 7), Leg 1 (item 8) and Table Support (item 2 and 12 - Mirror) in preordained position, fasten them together with clamp, then drill the holes D8,5mm as given in 2D documentation.

Make the two of these subassemblies.

Project from www.craftsmanspace.com

Project: Lager Complet

Page 26 of 37

2. Fasten the Table top Plank (item 1) to the Table Support Mirror (item 2) and the Table Support (item 12) by using Wood Screw D4,5x80mm (items 10) and Wood Screw D4,5x55mm (items 11). Before using the screws, drill the pilot holes on proper places (shown in 2D documentation).

Project from www.craftsmanspace.com

Project: Lager Complet

Page 27 of 37

3. Fasten the subassembly made in the previous step to the subassembly made in step 1 using the fasteners: Washer 8 (item 4), Lock Washer 8 (item 5), Hexagon Nut M8 (item 6), Bolt M8x110mm (Item 9), Bolt M8x130mm (Item 15) and Bolt M8x150mm (item 3).

Project from www.craftsmanspace.com

Project: Lager Complet

Page 28 of 37

4. Fasten the Leg Support 2 (item 13) and Leg Support 1 (item 14) to the subassembly made in the previous step by using Wood Screw D4,5x80mm (items 10).

Project from www.craftsmanspace.com

Project: Lager Complet

Project from www.craftsmanspace.com

Page 29 of 37

Project: Lager Complet

Page 30 of 37

2. BENCH 1. Carefully put Big Leg (item 1) and Leg Small (item 2) in preordained position, fasten them together with clamp and then drill the holes D8,5 mm on proper places as shown in 2D documentation. Join them together by using standard fasteners: Bolt M8 x 130mm (item 7), Washer 8 (item 8), Lock Washer A8 (item 9) and Hexagon Nut M8 (item 10).

Project from www.craftsmanspace.com

Project: Lager Complet

Project from www.craftsmanspace.com

Page 31 of 37

Project: Lager Complet

Page 32 of 37

2. Put the Bench Support (item 12) and Bench Support Mirror (item 13) in preordained position to the subassembly from the previous picture. Fix the items in clamps and drill the holes D8,5mm.

3. Fix the items from the previous step by using fasteners: Axle (item 18), Washer 6 (item 15), Lock Washer 6 (item 16) and Hexagon Nut M6 (item 17) and with fasteners: Bolt M6x90mm (item 14), Washer 6 (item 15), Lock Washer 6 (item 16), Hexagon Nut M6 (item 17).

Project from www.craftsmanspace.com

Project: Lager Complet

Form the two of these subassemblies.

Project from www.craftsmanspace.com

Page 33 of 37

Project: Lager Complet

Page 34 of 37

4. Fasten the Bench Seat Plank 2 (items 3) to the subassembly made in the previous step by using Wood Screw D4,5x70mm (items 6) with the measurements from 2D documentation. Before using the screws, drill the holes on proper places (shown in 2D documentation).

Project from www.craftsmanspace.com

Project: Lager Complet

Page 35 of 37

5. Fasten the Bench Back Plank (item 4) to the assembly made in the previous step by using Wood Screw D4,5x70mm (items 6). Before using the screws, drill the holes on proper places (shown in 2D documentation).

Project from www.craftsmanspace.com

Project: Lager Complet

Page 36 of 37

6. Fasten the Bench Back Plank Small (item 5) to the assembly made in the previous step by using Wood Screw D4,5x70mm (items 6). Before using the screws, drill the holes on proper places (shown in 2D documentation).

Project from www.craftsmanspace.com

Project: Lager Complet

Page 37 of 37

7. Fasten the Leg Support (items 11) to the assembly made in the previous step by using Wood Screw D4,5x70mm (items 6). Before using the screws, drill the holes on proper places (shown in 2D documentation).

Project from www.craftsmanspace.com

Project: Beer Complet

Page 1 of 57

Beer Complet

Carefully make the items by following the measurements given on particular pictures. The measurements are given in millimeters, while the measurements given in inches are in brakes (1 inch = 25, 4 mm). You can use various types of wood, but we recommend birch, cedar, walnut, beech, maple or alder.

Project from www.craftsmanspace.com

Subassembly List

Project from www.craftsmanspace.com

Project: Beer Complet

Page 2 of 57

Table Parts List

Project from www.craftsmanspace.com

Project: Beer Complet

Page 3 of 57

Table 2D Documentation

Project from www.craftsmanspace.com

Project: Beer Complet

Page 4 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 5 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 6 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 7 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 8 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 9 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 10 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 11 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 12 of 57

Chair Parts List

Project from www.craftsmanspace.com

Project: Beer Complet

Page 13 of 57

Chair 2D Documentation

Project from www.craftsmanspace.com

Project: Beer Complet

Page 14 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 15 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 16 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 17 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 18 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 19 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 20 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 21 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 22 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 23 of 57

Bench Parts List

Project from www.craftsmanspace.com

Project: Beer Complet

Page 24 of 57

Bench 2D Documentation

Project from www.craftsmanspace.com

Project: Beer Complet

Page 25 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 26 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 27 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 29 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 28 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 30 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 31 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 32 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 33 of 57

Project from www.craftsmanspace.com

Project: Beer Complet

Page 34 of 57

Project: Beer Complet

Page 35 of 57

Table Assemblage Instruction 1. Join the Leg with hart (item 2) and Leg with decoration (item 3) with glue. After this step, you should put that subassembly into the clamp, until the glue dries out.

Project from www.craftsmanspace.com

Project: Beer Complet

Page 36 of 57

2. Place the Support (items 4) on their places from the both sides of a subassembly made in a previous step and fasten them with clamp. Drill the holes D8,5mm and fasten the Support (items 4) onto the assembly from a previous picture using standard parts: Bolt M8x150mm (item 7), Washer 8 (item 8), Lock Washer A8 (item 9) and Hexagon Nut M8 (item 10).

Project from www.craftsmanspace.com

Project: Beer Complet

Project from www.craftsmanspace.com

Page 37 of 57

Project: Beer Complet

Page 38 of 57

3. Fasten the Table Paw (item 13) onto the subassembly made in a previous step by using Wood screw (item 11). Before using Wood screws, drill the proper pilot holes (by following 2D documentation).

Project from www.craftsmanspace.com

Project: Beer Complet

Project from www.craftsmanspace.com

Page 39 of 57

Project: Beer Complet

Page 40 of 57

4. Form two of these subassemblies.

5. Join together the two subassemblies made in a previous step using Table horizontal (item 5) and Wedge (item 6).

Project from www.craftsmanspace.com

Project: Beer Complet

Project from www.craftsmanspace.com

Page 41 of 57

Project: Beer Complet

Page 42 of 57

6. Fasten the Table Plank (item 1) onto the subassembly made in a previous step using Wood screws (item 11 and 12). Before using Wood screws, drill the proper pilot holes (by following 2D documentation).

Project from www.craftsmanspace.com

Project: Beer Complet

Project from www.craftsmanspace.com

Page 43 of 57

Project: Beer Complet

Project from www.craftsmanspace.com

Page 44 of 57

Project: Beer Complet

Page 45 of 57

Chair And Bench Assemblage Instruction 1. Carefully place the Big Leg (item 1) and Leg Small (item 2) in proper position, clutch them in clamp and then drill the holes D8,5mm by following 2D documentation. Join these two items together using Washer 8 (item 3), Lock Washer A8 (item 4), Hexagon Nut M8 (item 5) and Bolt M8 x 90mm (item 6).

Project from www.craftsmanspace.com

Project: Beer Complet

Project from www.craftsmanspace.com

Page 46 of 57

Project: Beer Complet

Page 47 of 57

2. Fasten the Paw (items 12) to the subassembly made in previous step with Wood screws (item 11). Before using Wood screws, drill the proper pilot holes (by following 2D documentation).

Project from www.craftsmanspace.com

Project: Beer Complet

Project from www.craftsmanspace.com

Page 48 of 57

Project: Beer Complet

3. Form the two of these subassemblies.

Project from www.craftsmanspace.com

Page 49 of 57

Project: Beer Complet

Page 50 of 57

4. Fasten the Chair Seat Plank 2 (item 7) and Chair Seat Plank 1 (item 8) to the assembly made in previous step with Wood screws (item 11) by the given measurements. Before using Wood screws, drill the proper pilot holes (by following 2D documentation).

Project from www.craftsmanspace.com

Project: Beer Complet

Project from www.craftsmanspace.com

Page 51 of 57

Project: Beer Complet

Page 52 of 57

5. Fasten the Chair Back Plank (item 9) to the assembly made in previous step with Wood screws (item 11) by the given measurements. Before using Wood screws, drill the proper pilot holes (by following 2D documentation).

Project from www.craftsmanspace.com

Project: Beer Complet

Page 53 of 57

6. Fasten the Chair Back Plank Small (item 10) to the assembly made in previous step with Wood screws (item 11). Before using Wood screws, drill the proper pilot holes (by following 2D documentation).

Project from www.craftsmanspace.com

Project: Beer Complet

Page 54 of 57

7. Fasten the Chair Horizontal (item 13) to the assembly made in previous step with Wood screws (item 11). Before using Wood screws, drill the proper pilot holes (by following 2D documentation).

Project from www.craftsmanspace.com

Project: Beer Complet

Project from www.craftsmanspace.com

Page 55 of 57

Project: Beer Complet

Project from www.craftsmanspace.com

Page 56 of 57

Project: Beer Complet

Follow exactly the same instructions to assemble the Bench.

Project from www.craftsmanspace.com

Page 57 of 57

LateralL 1,80

0,90

1,80

1,80

8,46 4,23

0

3,5

25

25

43,87

LateralC

60

28 Base

28

60

Manija R VERDADERO1,75

56,40 TÍTULO:

N.º DE PIEZA Base LateralL LateralC Manija Unidades en cm

CANTIDAD 1 2 2 1

Caja de herramientas básica CarpinteriaFacil.com ESCALA:1:10

HOJA 1 DE 1

A4

45

15

2,50

20

1

, R1

3,57

2,50

15

0

12

2,01

1,2

3,40

TÍTULO:

Repisa con ménsulas caladas Unidades en cm

CarpinteriaFacil.com ESCALA:1:5

HOJA 1 DE 1

A4

20 10

120

Soporte Barral 280

20

10

TÍTULO:

10 25

Puntera

1 2 1 2

20

20

20 30

10

10

CANTIDAD

Soporte Lateral Barral Puntera

Lateral

250

10

PIEZA

120 30 30

R3

0

90

30

120 12

32,03

0

10

60

R3

0

30

R4

20 20 120

18,08

Porta Rollo de Cocina

CarpinteriaFacil.com ESCALA:1:5

HOJA 1 DE 1

A4

20

16

20

1

15

3,50

65

5

18

1

3,50

N.º DE ELEMENTO 1

N.º DE PIEZA Lateral Macetero

DESCRIPCIÓN

CANTIDAD

Formado por los elementos 1.1 y 1.2

2

1.1

Pata

3.5 cm x 1cm x 65 cm

2

1.2

travesaños

3.5 cm x 1 cm x 20 cm

3

2

travesaños

3.5 cm x 1 cm x 20 cm

6

3

soporte

1cm x 1 cm x 16cm

2

4

base

3.5 cm x 1 cm x 18 cm

4

TÍTULO:

Macetero http://CarpinteriaFacil.com ESCALA:1:10

HOJA 1 DE 1

A4

18,40 cm

275 cm

32,50 cm

5 cm

53,60 cm

39,43 cm

2,50 cm

R8 ,5 7,95 cm 6 c

m

67,24 cm

3,80 cm

Tablón

TÍTULO:

Sube y baja http://CarpinteriaFacil.com ESCALA:1:20

HOJA 1 DE 5

A4

Caballete

50 cm

73

° 26,59 cm 39,43 cm

cm

22,80 cm

1,80 cm

3,80

El caballete en su parte inferior forma un cajón que podemos rellenar con tierra, arena, piedras o cemento para dar peso y mejorar la seguridad del juego; en caso de usarse elementos sueltos como arena o piedras se recomienda colocar una cubierta para que los niños no las retiren para jugar.

50 cm

53,60 cm

21,9

6 cm

2 cm

8,90 cm

39,43 cm

TÍTULO:

Sube y baja http://CarpinteriaFacil.com ESCALA:1:10

HOJA 2 DE 5

A4

Estructura en A

39,43 cm 4,45 cm

°

10 cm

107

2 cm

20 mm

55 c

m

Varilla roscada de

73

°

25,32 cm

16 cm

cm 3,80 cm

3,80

8,90 cm

R VERDADERO2,50 cm

8,90 cm

16 cm

17°

Pata

8,90 cm

5 cm

2 cm

10 cm 50 cm 3,80 cm

8,90 cm

17°

1,50 cm

4,45 cm 3,80 cm

55 cm

Travesaño largo

Travesaño

TÍTULO:

Sube y baja http://CarpinteriaFacil.com ESCALA:1:10

HOJA 3 DE 5

A4

Caño galvanizado 3/4" como eje

Espiga

Manilla

m

8m

2,80 cm 5 cm 3,80 cm

15 cm

3,20 cm

3,80 cm

5 cm

2,50 cm 7,10 cm

Soporte del manillar

6,40 cm

18,80 cm

2,50 cm

18 cm

50 cm

1,80 cm

22,80 cm

39,43 cm

17°

39,43 cm

Base

Lateral Chico del Cajón

17,50 cm

50 cm

73

°

TÍTULO:

Sube y baja

Lateral Grande del Cajón

http://CarpinteriaFacil.com ESCALA:1:10

HOJA 4 DE 5

A4

N.º DE ELEMENTO

N.º DE PIEZA

DESCRIPCIÓN

CANTIDAD

1

Tablón

Elemnto basculante del sube y baja

1

2

Manillar

Agarraderas para que se sujeten los niños

2

Pieza de madera vertical

1

Manilla

Varilla para agarrase

1

Espiga

Espiga para fijar la manilla

1

Caño galvanizado que se sujeta con dos grampas omegas

1

Ccon talones de 2" x 4" cepillados

1

Union de 2 patas y 1 travesaño

2

Soporte manillar

3

Eje

4

Caballete Estructura en A Pata

2

Travesaño

1

AM -- M20 x 160 C AM-M20-N Travesaño largo

5

Varilla roscada Tuercas con arandelas Piezas que unen las estructuras en A

Pieza rectangular de contrachapado de 18 Base mmfijada a la parte inferior del caballete Pieza de contrachapado de 18 Lateral Chico Cajón mm que se atornilla por el exterior del caballete Pieza de contrachapado de 18 Lateral Grande Cajón mm que se atornilla por el interior del caballete Circulos de metal soldados al eje o tapas roscadas y Tapa arandelas para que el eje no se salga de su posición

1 2 2 1

2 2

2

TÍTULO:

Sube y baja http://CarpinteriaFacil.com ESCALA:1:20

HOJA 5 DE 5

A4

R1

60

Lateral A

4

250

3

35

50

30

5

3

50 4

450

Lateral B 242 PIEZA

CANTIDAD

LateralA LateralB Fondo

2 2 1

442

Fondo

TÍTULO:

Bandeja CarpinteriaFacil.com ESCALA:1:5

HOJA 1 DE 1

A4

Pata 9,50

9,50

9,50

3,50

R1

9,50

1,50

,20

73

1,50

Travesaños 3,50 3,50

1,50

9,50 88

1,50

3,50 TÍTULO:

9,50

50

Unidades en cm

Mesa CarpinteriaFacil.com ESCALA:1:10

HOJA 1 DE 3

A4

Tapa de la mesa

Regrueso Largo

140

Regrueso Corto

75

80

Contrachapado

135

20mm de espesor

TÍTULO:

R1

Mesa

2

5

0

,2

2,50

5

Unidades en cm

CarpinteriaFacil.com ESCALA:1:10

HOJA 2 DE 3

A4

9

75

20

43

81

9

20

Pieza contrachapado regrueso-largo regrueso-corto Pata Travesaño-corto Travesaño-largo

CANTIDAD 1 2 2 4 2 2

TÍTULO:

Mesa Unidades en cm

CarpinteriaFacil.com ESCALA:1:20

HOJA 3 DE 3

A4

Vista Superior Lateral

R6

90

12

5,50

3

50

120

30

210

210 Vista Frontal

Vista Lateral

25

Fondo lateral Frontal Peso Eje Puntera

15

R5

Peso

R1

195

10

DESCRIPCIÓN

CANTIDAD

210x210x3

1 2 4 1 2 2

Varilla 25 x 195 Varilla 10 x 40 esfera 24

0

10

PIEZA

5,50

10

50

Frontal 50

40

TÍTULO:

10

Servilletero

Eje R12

24

Puntera

Unidades en mm

CarpinteriaFacil.com ESCALA:1:5

HOJA 1 DE 1

A4

Estantería Mesa para café TÍTULO:

Cubo Multiusos CarpinteriaFacil.com ESCALA:1:5

HOJA 1 DE 2

A4

7,50

400

3

PIEZA A

5

390

400

25

3

7,50

50

PIEZA B

400

370

TÍTULO:

Cubo Multiusos

25

7,50

CarpinteriaFacil.com ESCALA:1:5

HOJA 2 DE 2

A4

1,22

0,72

0,64

0,39

0,10

0,05

0,26

0,53

Ángulo de corte 17º

Pata

Soporte horizontal

Soporte vertical

0,39

0,66

0,26

1,22 Ángulo de corte 17º

Travesaño Nombre de la pieza Soporte vetical Travesaño Soporte horizontal Pata Medidas en m

Largo de la Cantidad pieza 0.39 m 1.22 m 0.26 m 0.66 m

Madera de pino estructural de 2" x 4"

2 3 2 4

TÍTULO:

Caballete para trabajos pesados CarpinteriaFacil.com ESCALA:1:20

HOJA 1 DE 1

A4

5

2,54

31,50

32,50

2

33,80

Base del cajón 14 1,20

9

14

10 10

Base

1,20 Soporte de barral

10

42,27

10

7

R1,2

11,50

1,90

3,15

R1

35

35

Separador

0,70 10

1,20

35 Lateral del cajón

0,60

TÍTULO:

Organizador portatil de adhesivos CarpinteriaFacil.com ESCALA:1:5

HOJA 1 DE 1

A4

84 6

Trasera

100

12

6

12

6

56,70

12

Vista superior de un lateral

Frontal

84 Laterales

0°

12

160

50

Porta Rollo

80 60

56,73

100

R5

Sierra para metales

55

4

10

50

5

TÍTULO:

Eje

Dispensador de cinta adhesiva

72

10 Unidades en mm

CarpinteriaFacil.com ESCALA:1:2

HOJA 1 DE 1

A4

0,08

0,43

0,83

1,70

1,23

0,05

0,41

0,91

0,08

0,41

0,02

0,05

0,05

0,03

0,05

Medidas en Pulgadas

Medidas en sistema Cant metrico

0.75"x3"x67"

2 cm x 8 cm x 1.7 m

4

0.75"x2"x67"

2 cm x 5 cm x 1.7 m

4

0.75"x2"x36"

2 cm x 5 cm x 91 cm

30

2"x2"x16"

5 cm x 5 cm x 41 cm

10

0,05

0,08

0,05

0,02

0,05

0,91

TÍTULO:

Estantería sencilla para el taller CarpinteriaFacil.com ESCALA:1:20

HOJA 1 DE 1

A4

50,17

3,81

3,81

3,81

3,81

7,62

1,91

3,81

0,95

3,81

5,08 1,27

0,95

3,81

42,55

34,93

7,62

5,08

R5

TÍTULO:

Mesa de café CarpinteriaFacil.com ESCALA:1:10

HOJA 1 DE 1

A4

45,72 5,08 1,27

5,08

45,72

45°

2,54

40,64

TÍTULO:

Juego de Damas Unidades en cm

CarpinteriaFacil.com ESCALA:1:5

HOJA 1 DE 1

A4

1,20

3

0,70

2

14

15

0,70

2

0

R0,6 12

15

1,20

5

Unidades en cm

TÍTULO:

Repisa de madera y cristal

CarpinteriaFacil.com ESCALA:1:5

HOJA 1 DE 1

A4

0,50

14,50

14,50 14

14,50

24 14 24

0,50

Vista Superior

15

10,80

12

18

30

30

18 19,20

21,20

4,75

20

25 Vista Lateral

25

Vista Frontal

Vista Inferior

70

68,80

20

30 4,75

31,20

31,20

0,60 0,60

8,75

0,50

Vista Trasera

0,60

4,75

TÍTULO:

Organizador de escritorio CarpinteriaFaci.com

Unidades en cm ESCALA:1:10

HOJA 1 DE 3

A4

23,30

0,60

0,60

10,80

10,80

5,40

30

23,30

15

28,80

TÍTULO:

Organizador de escritorio CarpinteriaFaci.com ESCALA:1:10

HOJA 2 DE 3

A4

0,60

15

24,50

30

24,50

0,50

12

14,50

14,50

0,50

14,50

14

7,25

14,50

21,20

0,50

24 14

14,50

7,25

0,50

14,50 19,20

0,60

25

0,50

0,60 0,50

20

30

8,75 Esquema del ranurado

TÍTULO:

Organizador de escritorio CarpinteriaFaci.com ESCALA:1:10

HOJA 3 DE 3

A4

30

67,50

7

2,50

100

65

7

Travesaños superiores 2

45°

4,50

39,50 2

2

2

39,50

3,50

60,04

81

60,04

81 2 7

Travesaños inferiores (X)

7

2 TÍTULO:

Mesa redonda Patas

CarpinteriaFacil.com ESCALA:1:20

HOJA 1 DE 1

A4

2

50

R1

2

12.7

15

2

,60

20 1

R0

10.5

TÍTULO:

Organizador de Escritorio Sencillo

CarpinteriaFacil.com ESCALA:1:5

HOJA 1 DE 1

A4

Project: Practical Stool

Page 1 of 11

Practical Stool

As the object with many aspects of use, the stool has played the important role in everyday life since long time ago. Made up in various shapes and having symbolic, ceremonial and practical meaning, in the past times these seats were also significant ritual objects, used by chiefs, shamans and members of various tribes for centuries. With a suitable small size, stools were precious personal things, especially for people living in moving villages and for migrant nations, providing them refreshing moments of rest and preserving the memories of their motherlands. Nowadays, the stool remains to be a favorite widget, whether it serves as a seating for craftsmen, farmers and artists, or it’s being popular among the children and adults as both practical and decorative part of furniture. You can use many kinds of wood for making this Stool, but we recommend you to purchase some wood with nice texture like Ash, Walnut, Beech, Cedar, Birch, Maple, Oak, Pine, etc. If you are planning to paint the Stool, the texture of a selected wood is not important. Make all the items precisely by the measurements given on particular 2D drawings. The measurements are given in millimeters, and the measurements in inches are given in brakes (1 inch = 25, 4 mm).

Project from www.craftsmanspace.com

Parts List

Project from www.craftsmanspace.com

Project: Practical Stool

Page 2 of 11

Assembly Drawing

Project from www.craftsmanspace.com

Project: Practical Stool

Page 3 of 11

Project from www.craftsmanspace.com

Project: Practical Stool

Page 4 of 11

Project from www.craftsmanspace.com

Project: Practical Stool

Page 5 of 11

Project from www.craftsmanspace.com

Project: Practical Stool

Page 6 of 11

Project from www.craftsmanspace.com

Project: Practical Stool

Page 7 of 11

Project from www.craftsmanspace.com

Project: Practical Stool

Page 8 of 11

Project: Practical Stool

Page 9 of 11

Assemblage Instructions 1. Join the Side Boards (item 2) with the Longitudinal Lath (item 3) using the Wedges (item 4). You can put small amount of glue on the Wedges before this operation. Wait until glue is dry before you continue with assemblage.

Project from www.craftsmanspace.com

Project: Practical Stool

Page 10 of 11

2. Lightly mark the outlines of the Side Boards (item 2) with pencil on the lower side of the Top Board (item 1).

3. Put the Dowel Centers into the holes on the Side Boards (item 2) and then mark the spots for the holes on the Top Board (item 1).

Drill the holes on spots on the Top Board (item 1) that you marked in the previous step.

Project from www.craftsmanspace.com

Project: Practical Stool

Page 11 of 11

4. Join the Top Board (item 1) with the subassembly made in step 1 with glue using Dowels D8x34 (item 5) and wait until glue is dry.

If you like to paint, you can cover this stool in some vivid color and draw some flowers, animals or other motives on its surface. Be creativ, free your imagination, and as a result, you will have an original artifact in your home.

Project from www.craftsmanspace.com

Project: Folding camping stool plan

Page 1 of 16

Folding camping stool plan Camping is a great way to spend some time in a fresh air and to enjoy the beauty of nature. Spending time in nature offers a good opportunity for some recreational activities like biking, hiking, bird watching or canoeing which we can not practice in urban areas, or at least they are not even closely so pleasant. All these activities allow you to spend some quality time outdoors and be physically active in nature, to have peace and quiet, away from city noises, stress and smog.

The first time you will go camping, you will probably find out that you did not brought a lot of things that you need for camping. You will become more experienced after few years, you will understand which things are necessary and which excessive and you will be equipped with the right camping gear. Your holiday in nature will become more comfortable and relaxed. Experienced campers have camping gears which they always carry on camping. It usually consists of equipment like tent, sleeping bags or blankets, folding table, kitchen utensils, camping stools or camping chairs, hammock and numerous small but important things. Good folding stools or chairs can significantly improve the quality of camping. They do not take a lot of space, so they are common pieces of the camping gear. Of course, you can always sit on a fallen tree or a log around the camp fire, but when the rain falls and all around you become wet, the dry stool will be quite valuable thing for you. Besides that, the anthills can often be found near the

Project from www.craftsmanspace.com/

Project: Folding camping stool plan

Page 2 of 16

camps, and that could make sitting on the ground very unpleasant. Because all of the things listed above, the folding stool is a very valuable part of camping gear. If the right model of the camping folding stool is chosen, it can serve not only for sitting but also as a mini table, and for other various things. Because of all these reasons, we present to you the camping stool plan by which you can – if you make it well – have universal wooden camping stool that will last for years. This camping stool is very simple and sturdy and its main advantage is that it takes very small space after folding. In a few words, this camping stool represent a comfortable, dry spot for sitting, and if necessary, it can serve as a work surface, writing table or as a mini table. Its construction is so simple that the basic hand tools such as hand saw, drill and layout tools are enough to make it. Since this folding camping stool is also ideal for various purposes in the house and yard, we recommend that you make a couple of them, which will always be at your hand.

You could purchase quality camping stools, but the ones that will serve you for years are usually quite expensive, so by making this camping stool you will save a lot of money and its manufacture will give you pleasure. Camping stool from our plan is designed for a person of average weight, so if you are heavier you should adjust the dimensions to your needs. The width of the stool should be adjusted to provide an ample seating for a person using it. The height of seating area should be at user`s knee level. If you change its dimension, you can also easily make a camping table. For stool making, use wood free of any knots, because the stool will eventually break on that spot. Cut out all the parts and drill the holes according to the dimensions given in the plan. Using bolts and dowels, connect all parts. You can use various types of wood for the manufacture, but it is best to use some hardwood. Maple, oak, walnut and other similar kinds of wood will certainly be a good choice. We recommend you to choose some hard and durable hardwood or pressure treated wood, suitable for outdoor use. However, if you decide to use some less resistant wood, protect it with several coats of water-proof finish. Protect it with a finish at least once a year, because your fishing stool will be often exposed to a moisture and damp. When the stool is not in use, clean it from the dirt, wipe off the moisture, dry it thoroughly and then place it in a dry place. Only then the wood and leather will last for years. With the right choice of the wood and proper finish you will get great and long lasting stool. When it comes to the finish, you can paint it with color or lacquer, but you can also leave it without a finish. We are using this folding stool in the backyard without finish for years. Of course, we always put it in a dry place, where it is not exposed to the various weather conditions.

Project from www.craftsmanspace.com/

Folding camping stool plan – Parts list

Project: Folding camping stool plan

Project from www.craftsmanspace.com/

Page 3 of 16

Folding camping stool plan – Assembly drawing

Project: Folding camping stool plan

Project from www.craftsmanspace.com/

Page 4 of 16

Folding camping stool plan – Parts

Project: Folding camping stool plan

Project from www.craftsmanspace.com/

Page 5 of 16

Project: Folding camping stool plan

Project from www.craftsmanspace.com/

Page 6 of 16

Project: Folding camping stool plan

Project from www.craftsmanspace.com/

Page 7 of 16

Project: Folding camping stool plan

Project from www.craftsmanspace.com/

Page 8 of 16

Project: Folding camping stool plan

Project from www.craftsmanspace.com/

Page 9 of 16

Project: Folding camping stool plan

Project from www.craftsmanspace.com/

Page 10 of 16

Project: Folding camping stool plan

Project from www.craftsmanspace.com/

Page 11 of 16

Project: Folding camping stool plan

Project from www.craftsmanspace.com/

Page 12 of 16

Project: Folding camping stool plan

Project from www.craftsmanspace.com/

Page 13 of 16

Folding camping stool plan – Mirror parts

Project: Folding camping stool plan

Project from www.craftsmanspace.com/

Page 14 of 16

Project: Folding camping stool plan

Project from www.craftsmanspace.com/

Page 15 of 16

Page 16 of 16

Project: Folding camping stool plan Folding camping stool plan – Folding steps STEP 1

STEP 2

STEP 3

STEP 4

Project from www.craftsmanspace.com/

10

1,80

10

80

32,50 81

51

32,50

20 120

TÍTULO:

Superficie de trabajo CarpinteríaFácil.Com ESCALA:1:10

HOJA 1 DE 1

A4

67

81

TÍTULO:

Caballete apilable CarpinteríaFácil.Com ESCALA:1:10

HOJA 1 DE 1

A4

Project: Hexagon Stool

Page 1 of 19

Hexagon Stool

As the object with many aspects of use, the stool has played the important role in everyday life since long time ago. Nowadays, the stool remains to be a favorite widget, whether it serves as a seating for craftsmen, farmers and artists, or it’s being popular among the children and adults as both practical and decorative part of furniture

Project from WWW.CRAFTSMANSPACE.COM

Parts List

Project from WWW.CRAFTSMANSPACE.COM

Project: Hexagon Stool

Page 2 of 19

Assembly Drawing

Project from WWW.CRAFTSMANSPACE.COM

Project: Hexagon Stool

Page 3 of 19

Project from WWW.CRAFTSMANSPACE.COM

Project: Hexagon Stool

Page 4 of 19

Project from WWW.CRAFTSMANSPACE.COM

Project: Hexagon Stool

Page 5 of 19

Project from WWW.CRAFTSMANSPACE.COM

Project: Hexagon Stool

Page 6 of 19

Project from WWW.CRAFTSMANSPACE.COM

Project: Hexagon Stool

Page 7 of 19

Project from WWW.CRAFTSMANSPACE.COM

Project: Hexagon Stool

Page 8 of 19

Project from WWW.CRAFTSMANSPACE.COM

Project: Hexagon Stool

Page 9 of 19

Project from WWW.CRAFTSMANSPACE.COM

Project: Hexagon Stool

Page 10 of 19

Standard Plans

Project from WWW.CRAFTSMANSPACE.COM

Project: Hexagon Stool

Page 11 of 19

Project: Hexagon Stool

Assemblage Instructions 1.

Join with glue 3 pieces of the Seat Triangle (part 1).

2. Make two of these subassemblies and join them with glue.

Project from WWW.CRAFTSMANSPACE.COM

Page 12 of 19

Project: Hexagon Stool

Page 13 of 19

3. To form hexagon out of the joined parts you will need to cut off the pieces which are colored in blue on the pictures.

4.

Attach the Seat Edges (part 2) with glue to the assembly from the previous picture.

Project from WWW.CRAFTSMANSPACE.COM

Project: Hexagon Stool

5. Attach the Legs (part 7) with glue to the Column (part 5).

Project from WWW.CRAFTSMANSPACE.COM

Page 14 of 19

Project: Hexagon Stool

Page 15 of 19

6. Drill 4 holes on the assembly made in the previous step following 2D documentation. Then carefully hammer in it Dowels D6 x 35mm (Part 8). Do not forget to put some glue on the tip of Dowels and in each hole, before you join them.

Project from WWW.CRAFTSMANSPACE.COM

Project: Hexagon Stool

Page 16 of 19

7. Drill the hole with diameter D30mm (1,18in) on the assembly made in the previous step. Attach the Seat Axle(Part 9) with glue to the assembly

8. Attach the Support Board (Part 3) with glue to the assembly made in the previous step.

Wait until the glue dries out, then drill pilot holes trough the Support Board (Part 3) and Column (part 5) and screw the Wood Screws D5 x 50mm (Part 6) in the holes. This step will additionally fasten construction.

Project from WWW.CRAFTSMANSPACE.COM

Project: Hexagon Stool

9. Drill hole with diameter D30mm (1,18in) in the subassembly made in the step 4

Project from WWW.CRAFTSMANSPACE.COM

Page 17 of 19

Project: Hexagon Stool

Page 18 of 19

This way made subassembly attach with glue to the subassembly made in step 8.

10. Wait until the glue dries out, then drill pilot holes trough the Support Board (Part 3) and the subassembly made in the step 4.

Project from WWW.CRAFTSMANSPACE.COM

Project: Hexagon Stool

Screw the Wood Screws D5 x 35mm (Part 4) in the holes.

Project from WWW.CRAFTSMANSPACE.COM

Page 19 of 19