User Manual HR-630 En -ASUKA Car TV

Model: HR-630

CONNECTED Car TV Diversity Receiver

User Manual

The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk at electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK – DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNE;

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance

Please read all information in this manual thoroughly. Familiarize yourself with the capabilities and the usage of your appliance before attempting to operate or maintain this unit. Taking a minute to do this now will help to prevent any damages or loss in the future. 

Keep this manual handy as a reference for operating procedures and safety information.



Do not insert any kind of irrelevant objects into this device through the openings as they may touch dangerous voltage points that could result in the fire or electric shock.



Avoid placing this unit near the liquids since it could result in the electric shock. Furthermore, the liquid splashes could damages the device and might cause smoke and overheat.



Always submit yourself into the safe driving rules and follow all traffic regulation. If you experience any difficulties while operating the system or reading the monitor display, please stop your car and make any necessary adjustment.

The Safety 

Do not attempt to install or service your device on your own. Installation or serving by the people without proper training and experience in the electronic equipment and the automotive accessories may be dangerous and could lead into the risk of the electric shock or the other hazards.



If the receiver does not work properly, please disconnect the power plug for your safety and contact your local dealer immediately for further technical support.



If any solid objects or liquids fall into the cabinet, please disconnect the unit and make it checked by the qualified person before operating it any further.



Do not install the in-car DVB-T/T2 receiver where it may



obstruct the driver’s vision,



impair with the performance of any vehicle’s operating system or the head unit, and



impair with the driver’s ability to safely operate the vehicle.

ASUKA HR-630 User Manual

2

Table of Contents Product Introduction ........................................................................................................... 4 I.

Unit Overview ...................................................................................5 I.1 Front Side ........................................................................................................................................... 5 I.2 Rear Side ............................................................................................................................................ 6 I.3 Remote Control Operations ............................................................................................................. 7 I.4 Home Menu ........................................................................................................................................ 8

II.

Installation & Configuration Guide .........................................................9 II.1 I/O Overview.................................................................................................................................... 10 II.2 Antenna Connection ....................................................................................................................... 12 II.3 Smart phone Connectivity ............................................................................................................. 14 II.4 Operating HR-630 from Steering Wheel Control(SWC)........................................................... 16 II.5 Touch control with Tier-1 Head Units .......................................................................................... 20 II.6 When having multiple external AV devices ................................................................................ 23

III.

Quick Guide for First-time User...........................................................24 III.1 TV Watching ................................................................................................................................... 24 III.2 TV Recording ................................................................................................................................. 26 III.3 Smart phone connection .............................................................................................................. 27 III.4 MOVIE Watching ........................................................................................................................... 28 III.5 MUSIC Listening............................................................................................................................ 29

IV.

TV Mode ........................................................................................30 IV.1 TV Menu ......................................................................................................................................... 30 IV.1.1 CH List (Channel List) ..................................................................................................30 IV.1.2 Audio ............................................................................................................................... 31 IV.1.3 CH Info.(Channel Information) ....................................................................................31 IV.1.4 Auto Search ...................................................................................................................32 IV.1.5 Channel Manager .........................................................................................................32 IV.1.6 Display ............................................................................................................................ 33 IV.1.7 TV Setting.......................................................................................................................33

V. VI. VII. VIII.

MOVIE Mode ...................................................................................35 MUSIC Mode ...................................................................................36 Radio Mode ....................................................................................37 System Setting ................................................................................38 VIII.1 Country/Language .........................................................................................................38 VIII.2 Display ............................................................................................................................. 38 VIII.3 Monitor Port Setting.......................................................................................................38 VIII.4 Steering Wheel Control (SWC) Learning ...................................................................39 VIII.5 HDMI Setting ..................................................................................................................41 VIII.6 Antenna Power Setting .................................................................................................41 VIII.7 Version / Upgrade ..........................................................................................................41 VIII.8 Reset Default..................................................................................................................41

IX. X.

Trouble Shooting Q&A ......................................................................42 Specification...................................................................................44

ASUKA HR-630 User Manual

3

Product Introduction ASUKA HR-630 is designed for users to access terrestrial DVB-T2 TV broadcasting services recently emerging in many countries. With its state-of-the-art TV signal reception performance and AV codec processing techniques, HR-630 promises to deliver users an easy access of local HD DVB-T2 TV programs as well as enhanced HD media player functions over existing multimedia features. Besides, HR-630 provides unique features and capability to make it more fun and convenient for in-car information & entertainment experience. They are: 1. Smart phone connectivity: It’s an easy & convenient to feed the smart phone contents into the head-unit. Either iOS or Android mobile devices are supported. 2. Steering wheel control: For cars equipped with steering wheel control features, after a very simple learning procedure, one can designate any 5 keys to perform the function of CH+, CH1, ENTER, EXIT, and TV LIST respectfully. The use of steering wheel control keys for HR-630 operation control can significantly ease the operation complexity and make HR-630 extremely suitable for in-car applications. 3. Providing both CVBS and RGB TV output: In addition to CVBS output, HR-630 also provides optional RGB (progressive) TV output that is the expected video format by several well-known head unit with the RGB TV output, HR-630 is capable of inter working with an even wider range of head units in the market..

ASUKA HR-630 User Manual

4

I. Unit Overview I.1 Front Side

2

7

5

3

1

4

6

8

(1)

AV in

: audio/video signal input port for external devices connection such as DVD, GPS etc.

(2) (3)

CCD in DVR in

: video input port for external CCD camera device connection : designated port for integration with ASUKA driving recorder.

(4) (5) (6)

HDMI in : HDMI signal input port for mobile phone connection. Charging USB port : with DC +5V output for battery charging of mobile devices. USB port : for USB stick or external hard disk connection to perform multimedia playback, TV recording, or software upgrade.

(7) (8)

Operating LED Power LED

ASUKA HR-630 User Manual

: the LED light to indicate whether the system is working or not : the LED light to indicate whether the power has been actively supplied to the device or not.

5

I.2 Rear Side

13

11

9 10

12

14

(9)

Antenna in

: antenna input port (NOTE: the unit provides +5V phantom power through RF signal pin.)

(10) (11) (12) (13)

HDMI out Video out Audio out Monitor Port*1

(14)

Power/SWC/IR Port*2 : with 12V/24V, ACC & GND car power inputs, steering wheel button signal inputs and IR control interface

: HDMI signal output port : CVBS video output ports : Audio left/right sound output ports : with RGB output signal and UART/IR control interface for advanced integration with 2-Din headunits

*1, See chapter II.1 for more information *2, See chapter II.2 for more information

ASUKA HR-630 User Manual

6

I.3 Remote Control Operations [2]

No

Button name

1

POWER

2

SRC

3 4

HOME MENU

5

CH▲

Select the channel up or move the cursor up

6

VOL

7

CH▼

Select the volume up or move the cursor right Select the volume up or move the cursor right

8

FF

Fast Forward

[13]

9

TV LIST

TV Program List

[14]

10

ENTER

To enter the selected item

11

EXIT

Exit the current setup

12

VOL

Select the volume down or move the cursor left

13

OK

Select the highlighted item play/pause

14

FR

Fast Rewind

15

REC

●

Function Select the power-on or stand-by Select a video source DTV/AV1/CCD/DVR Go to the home screen Enter the setup menu

[1]

[3]

from

[11]

[4] [5]

[12]

[6] [7] [8] [9]

or select [15]

[10]

-Start to record the TV/Radio program or exit the recording - Subtitle key in the normal operation mode

Remote Control Battery Installation If the battery power in the remote controller becomes low, please follow the steps below to replace a new battery: 1. Slightly push the battery case from the down to the up and pull out the battery case from the remote control. 2. Replace the original battery with the new one. 3. Insert back the battery and the case into the remote control.

ASUKA HR-630 User Manual

7

I.4 Home Menu This is the home menu screen. From here, you can access repestively the TV mode, LINK mode for smart phone connection, Movie mode for video playback, Music mode for music playback mode, RADIO mode, DVR mode, AV mode and Setting mode for system settings. 1. Use [VOL ] and [VOL ] buttons to highlight the desired mode. 2. Press [OK] button to enter the desired mode.

TV Mode To enter the DTV mode. Smart phone Link Mode To enter the link mode and operate the smartpone connectivity. Movie Playback Mode To enter the playback mode and watch the movie files. Music Playback Mode To enter the audio playback mode and listen to the music. Radio Playback Mode To enter radio playback mode and listen to Radio broadcasting. DVR Mode To enter the driving recorder mode and watch the real time video. AV Mode To select the AV output sourcing. System Settings To configure the device settings.

Note: Press the [HOME] key to go back to the home screen anytime. Press the [SOURCE] key to switch the AV source anytime.

ASUKA HR-630 User Manual

8

II. Installation & Configuration Guide -

Configuration overview

The HR-630 provides three different kinds of video output ports: AV OUT, HDMI, and Monitor Port Input devices





Driving Recorder

AV 1/AV2





USB devices

Smart phone link

HR-630 CONNECTED Car TV Diversity Receiver

Contents Sources available at each HR-630 output port

AV OUT (CVBS signal) TV

USB

Smartphone

Monitor Port (RGB signal) TV

USB

HDMI Port:

TV

USB

Smartphone

DVR

AV1/AV2

ASUKA HR-630 User Manual

9

II.1 I/O Overview Power/SWC/IR Port

Steering In 1

Steering In 2

1

Ground (black wire). Connect this cable to the vehicles chassis ground.

2

- Reverse status (orange wire). Connect this cable to the reverse gear to see the image of the rear view camera image on the front monitor. - Keep the cable grounded if the reverse mode is not enabled.

3

+12 ~ 24 V DC input (yellow wire). Connect this cable to (+) pole of the battery

4

Steering In 2 (green wire). Plug in the cable to the SWC output wire 2.

5

ACC (red wire). Connect this cable to the ACC ignition of your vehicle.

6

IR (Infrared) LED power. Power for the LED of the IR receiver.

7

Steering In 1 (Blue wire). Plug in the cable to the SWC output wire 1.

8

IR (Infrared) data input. Infrared data of the IR receiver.

9

IR (Infrared) power. Power of the IR LED.

10

IR ground. Ground for the IR LED.

ASUKA HR-630 User Manual

10

Monitor Port

UART_T

RGB_B

CsyncX

RGB_R

Ground RGB_G

UART_RX

Ground

1

UART TX output

2

UART RX input

3

Csync output

4

Ground

5

RGB_B (Video output)

6

Ground

7

RGB_R (Video output)

8

RGB_G (Video output)

1

Ground

2

Reserved

3

CVBS video input

4

Audio input

5

IR data output

6

UART RX input

7

+12V ACC output

8

UART TX output

9

+12V battery output

DVR Port

Mini USB

10 Reserved

ASUKA HR-630 User Manual

11

II.2 Antenna Connection In-car digital TV reception situation will vary from vehicle to vehicle and the installer may need to try anetnna mounting positions to determine the best position for most stable signal reception in vehicles. Important Notes on Antenna Installation: For a better reception, please place the rod antenna horizontally, and keep the rod antenna away from metals. Antenna Position To optimize the TV reception performance, we recommend that one antenna is mounted at the front and one at the rear of the vehicle. Please refer to the diagram below for some recommended locations.

2

1

(1) (2) (3) (4) (5)

3

4

5

Behind the Front Bumper. Note: Please make sure the bumper is not made of metal Top of the Front Windscreen, but at least 5cm away from the metal body of the car Top of the Rear Windscreen, but at least 5cm away from the metal body of the car Bottom of the Rear Windscreen, at least 5cm away from the metal body of the car Behind the Rear Bumper (note: make sure rear bumper is not made of metal)

*Noted: For position (2) ~ (4), because the windshields of many cars are usually equipped with film coating (that contains metal), the actual signal reception may be degraded, depending on the amount of the metal embedded within the film.

ASUKA HR-630 User Manual

12

Antenna Cable Routing Once a suitable position of antenna placement is found, carefully route the antenna cables to the receiver unit and then connect to the Antenna Inputs on DTV receiver.

ASUKA HR-630 User Manual

13

II.3 Smart phone Connectivity

If you are like most people these days, you’ve made your smartphone the source for Youtube, Google Map, and any other Internet information surfing. To answer the increasing demand of Internet access within a car via smartphone, HR-630 provides an efficient way to connect your smartphone to the head unit display on car monitor.

-

Configuration: Connect your smart phone to the HDMI input port of HR-630. Different interconnection cable should be used for iOS and Android devices, respectifully, as illustrated below: 

iOS device : device.



Android device:

ASUKA HR-630 User Manual

Lightning HDMI adaptor 

HDMI cable  HDMI IN port of HR-630

MHL cable  HDMI IN port of HR-630 device.

14

-

Set up the connection After proper interconnection cable is well installed, please enter the home menu as shown below. Select LINK mode and press [OK] button to execute smart phone connection.

If the connection is successfully activated, the mirroring image of smart phone will become also available on car monitor as shown in the below:

ASUKA HR-630 User Manual

15

II.4 Operating HR-630 from Steering Wheel Control (SWC) Most car models provide easy and convenient operation control of in-car entertainment devices (ex. AM/FM radio and/or media player) through the use of Steering Wheel Control (SWC) buttons. Typical SWC buttons offered originally, if any, are such as CH+, CH-, VOL+, VOL-. To provide users further enhanced convenience, HR-630 has been designed to support steering wheel control buttons to allow users change the TV to adjacent channel or any desired TV channels promptly. Operation is Quick and No hassle! Here is a brief summary how HR-630 works to achieve this operational convenience. (1) 5 major TV function keys from steering wheel control are supported in HR-630. They are: TV LIST , Channel up(CH+), Channel down (CH-), ENTER, and EXIT.  Tell HR-630 Which is Which: First, users shall go to SETTING mode as explained in the following paragraph to “teach” HR-630 which button on your steering wheel would be assigned to which function. Note that the correspondence could be arbitrary. However, to avoid unexpected results, the following SWC buttons shall NOT be used for these function assignments: VOL+, VOL-, MOD. (2) Use CH+/CH- button to change to adjacent TV channel. (3) One may first pop up the entire TV List by pressing TV LIST button and then navigate to other desired channel by using CH+ or CH- button. -

Operation Overview Steering Wheel

2-Din head unit Steering wheel Control signals

2 ~ 3 wires, 15V max (GND, output_1, & output_2)

AV SIGNAL

Note: The HR-630 can detect the SWC output voltage level from 0.2V ~ 15V.

ASUKA Car-TV Receiver

ASUKA HR-630 User Manual

16

The steering wheel control signals available from most car models are usually consisted of 2 or 3 wires. Generally speaking, when one press a particular SWC button, a specific voltage will be presented at one and/or 2 wires to “ inform ” the peripheral devices (ex. TV receiver) that a SWC button has been asserted. The TV receiver can therefore interpret the voltage and perform the corresponding action (CH+, CH-, ENTER, EXIT, TV LIST or nothing) in accordance with function asserted. The above-mentioned theories of operation are conceptually illustrated in the above wiring diagram. -

System Configuration for SWC Control 1.

The designated inputs of Power/IR port for SWC signals are Power GND (Black wire), Steering In 1 (Blue wire), and Steering In 2 (Green wire).

2.

Connection diagram is as follows: SWC GND  Power GND; SWC output wire 1Steering In 1(Blue wire); and SWC output wire 2  Steering in 2 (Green wire).

ASUKA HR-630 User Manual

17

-

How to set up SWC learning Since a car will have its own unique output voltage for each SWC button, a learning procedures to make HR-630 becomes familiar with the specific SWC signal becomes necessary. This following pictures will describe the steps required to achieve the SWC learning for 5 major TV function keys. 1. Start Steering Wheel Control Learning:

2. Learning Channel up (CH+) Key:

1.1 Back to Main Menu

2.1 Select the “CH+ Key Learning”

1.2 Enter Setting Mode and select Steering Control

2.2 Press the button of SWC designated for [CH+]

Learning

3. Learning Success

4. Learning Channel Down (CH-) Key:

The “Success” message will pop up when HR-630

4.1 Select the “CH- Key Learning”

successfully gets the key of SWC.

4.2 Press the button of SWC designated for [CH-]

5. Learning ENTER Key:

6. Learning EXIT Key:

5.1 Select the “OK Key Lerning”

6.1 Select the “EXIT Key Learning”

5.2 Press the button of SWC designated for [OK]

6.2 Press the button of SWC designated for [EXIT]

ASUKA HR-630 User Manual

18

7. Learning TV LIST Key: 7.1 Select the “TV LIST Key Learning” 7.2 Press the button of SWC designated for [TV LIST]

ASUKA HR-630 User Manual

19

II.5 Touch control with Tier-1 Head Units HR-630 provides advanced integration with tier-1 2-Din head units. This integration allow users to operate HR-630 not only through remote controller but also through the touch screen and/or the remote controller of the head unit. Below table is listed to summarize the head unit models that HR-630 can support and the available methods to control TV functions after integration. Supported Model SONY Kenwood JVC

Available methods to control HR-630 after integration Touch screen control, ASUKA remote control Touch screen control, Kenwood remote control, ASUKA remote control Touch screen control, JVC remote control, ASUKA remote control

To enable the function of touch control operation, a specific installation way for different headunit is required. For instance, the different interconnection cable is requested for each specific headunit to connect with HR-630. The installation guide for each supported head units is summarized as below for reference. -

SONY Head Unit

 Configuration : Video connection : Plug the SONY interconnection cable to the Monitor port on HR-630, and insert the other side to Navigation port on SONY head unit. Audio Connection : Plug audio L/R RCA cable to AV L/R Out on HR-630 and insert the other side to AUX IN on SONY head unit.

Audio L/R RCA cable

SONY interconnection cable

Audio L/R Output

ASUKA HR-630 User Manual

Monitor port

20

-

 System Setting at HR-630 : At HR-630, follow the steps: HOME->Setting->Monitor Port Setting, and enter the function of Supported Model. Press [OK] to enter option selection. Select SONY(XAV65) or SONY(Others) upon the headunit under integration. 

System Setting at SONY head unit :

In SONY head unit, everytime, when you intend to change current application source to watch TV, please be sure that the following steps are done accordingly. Step 1: Go to the HOME MENU of the head unit. Step 2: Enter AUX mode and return back to HOME MENU. IMPORTANT NOTICE : The TV sound can not successfully output through SONY headunit if Step2 is skipped.

Step 3: Enter Navigation and then TV screen will show up. *Note: Navigation icon of SONY head unit will not appear on screen unless the interconnection cable is plugged. KENWOOD/JVC Head Unit To integrate KENWOOD/JVC head unit, please adopt KENWOOD/JVC interconnection cable for the integration. The configuration is same as SONY head unit.



System Setting at HR-630 :

1. Before the operation on KENWOOD/JVC head unit, please find another standard monitor first with CVBS video input fuction. Connect the CVBS output of HR-630 to CVBS input of that monitor and make system setting on it. 2. At HR-630, follow the steps: HOME->Setting->Monitor Port Setting, and enter the function of Supported Model. Press [OK] to enter option selection. Select JVC(V41BT) or KENWOOD upon the headunit under integration.

ASUKA HR-630 User Manual

21



System setting at KENWOOD/JVC head unit : • KENWOOD 2-DIN

At KENWOOD or JVC head unit, everytime, when you intend to change current application source to watch TV, please be sure that the following steps are done accordingly. Step 1:

Go to the HOME MENU of the head unit.

Step 2: Enter AUX and return back to HOME MENU.

• JVC 2-DIN

IMPORTANT NOTICE : The TV sound can not successfully output through headunit if Step2 is skipped.

Step 3: Enter Navigation and then TV screen will show up.

ASUKA HR-630 User Manual

22

II.6 When having multiple external AV devices HR-630 serves an excellent way to integrate multiple external AV devices such as rear CCD camera, driving recorder (DVR) and other AV devices simultaneously into your car entertaining system. The following is to explain how to configure external AV sources with HR-630. 1.

Connect rear CCD camera to the CCD IN, Driving recorder into DVR IN, and/or any additional AV source to the stanadrd AV inputs as shown below:

2.

Enter the AV mode at Home Menu, then one may access the desired AV source by selecting the AV1, AV2 or AV3 option to switch between video sources.

ASUKA HR-630 User Manual

23

III. Quick Guide for First-time User III.1 TV Watching Step 1: Turn on the unit 1. Turn on the vehicles ACC or IGN. (or start the vehicle) 2. When the unit is powered, the POWER LED indicator show below will illuminate RED. 3. When the system is activated, the Operating LED on the unit will illuminate Green.

Operating LED

Power LED

Step 2: Highlight the “TV” option to enter the TV mode. After that, the screen of “Setup Wizard” will show up.

ASUKA HR-630 User Manual

24

Step 3: Set your located country, prefered OSD language, Summer Time and LCN option. NOTE: Time zone setting will be automatically updated once the Region setting is changed.

Step 4: Perform auto search to find available TV channels. 1. Select “Start” on Setup Wizard and press OK to active it. 2. The device will show "Scan screen" as below and perform searching the available TV channels in your area

Step 5: Good Job! You can now sit back and enjoy your mobile TV.

NOTE: Press the [OK] button to change the aspect ratio of the current TV program.

ASUKA HR-630 User Manual

25

III.2 TV Recording 1. While watching TV, press [REC] to start recording TV programs. The timer menu will appear on the lower left screen. This timer menu will disappear automatically when no operation is performed within 10 seconds. 2. Select favorite recording time on timer menu and press [OK] to start the recording. icon will appear on the left upper screen. The information of current recording time will be shown beside the icon. NOTE: a. Please ensure that a USB Storage device is b.

connected to the unit before recording. While turn off the ACC/IGN, the unit will continue recording until recording time is finished. The unit will automatically turn off while the recording is finished.

3. You can simply call the timer menu out with press [REC] again. 4. To stop recording, please select the STOP option on timer menu.

5. Recorded TV programs can be played back in MOVIE mode.

Important notes: i. A recorded program will be stored in a default folder named “PVR”. The file name will have “.TSV” file extention for recorded TV program. ii. The file will be named as: "Channel Name(RecordedDate_RecordedTime)” iii. Maximum file size of FAT/FAT32 is 4 GB, if the file exceeds this size, the system will creat a new file to continue the recording. iv. 1 GB storage can be used to save recorded program for approximately 45 ASUKA HR-630 User Manual

26

v. vi.

minutes. Storage system can support FAT/FAT32/NTFS formats. Generally all USB 2.0 flash drive can be used as storage devices. However, there are cases happening that the USB flash drive can’t succesffuly store recorded programs. So, before recording, it’s strongly suggested to first format the USB storage device by PC or laptop

WARNING! Please do not edit the “*.PLT” & “RECORD.TMP” files on your disk. Modifying/deleting this file will cause error on recorded file.

III.3 Smart phone connection The section below will explain how to configure the smart phone devices with HR-630. 1. Please connect your smart phones or smart devices with HR-630 by appropriate interconnection cable. The detailed connection instruction please refer to Chap II.3 . 2. After the interconnection cable is well installed, please enter the screen of HR-630 home menu. Select LINK mode and press [OK] button to execute smart phone connection.

3. If the smart phone connectivity is successfully activated, the mirroring image of smart phone will show on car monitor like the example shown as right picture.

ASUKA HR-630 User Manual

27

III.4 MOVIE Watching The section below will explain how to quickly play a video file stored on USB device.

1. Press the [Home] button to get back to the home screen. Select “Movie” section toward next setting. NOTE: Make sure that your USB device has been plugged into the receiver’s USB port, otherwise this function cannot be used.

2. The available video files will list on screen. Select the desired file and press [OK] to start playing the video. NOTE: Only video files will show under this mode. Music files will not.

3. To stop movie play, press [EXIT] button to return.

NOTE: 1. Press the [FR]

/ [FF]

2. Press the [PLAY/PAUSE]

button to increase or decrease the speed of track. button to pause or resume the movie playing.

3. Press the [REC] button to delete the highlighted file/folder.

ASUKA HR-630 User Manual

28

III.5 MUSIC Listening The section below will explain how to quickly play a music file stored on USB device.

1. Press the [Home] button to get back to the home screen. Select “Music” section toward next setting. NOTE: Make sure that your USB device has been plugged into the receiver’s USB port, otherwise this function can not be used.

2. The available music files will list on screen. Select the desired file and press [OK] to start playing the music. NOTE: Only video files will show under this mode. Music files will not.

3. To stop music play, press [EXIT] button to return.

NOTE: 1. Press the [FR] / [FF] 2. Press the [PLAY/PAUSE]

button to increase or decrease the speed of track button to pause or resume music playing.

3. Press [REC] button to delete highlighted file/folder.

ASUKA HR-630 User Manual

29

IV. TV Mode IV.1 TV Menu Enter TV mode first, and then press the [MENU] button to make TV menu appear. By navigating the different options, you can have the access to the channel list, audio settings, channel info, auto search, channel management, display setting and the subtitle through setting menu.

IV.1.1 CH List (Channel List) To display channel information, to preview the program, and to access the Electronic Program Guide (EPG) a. CH List 1. Select “Channel List” in the TV menu and press the [OK] button. The “Channel List” will appear on the screen. NOTE: you can also press the [EPG] button to enter “Channel List” while enjoy watching TV. 2. Scroll up/down the channel list to preview the program. 3. Press the [EXIT]/[MENU] button to exit. b. Schedule 1. Press the [VOL] button to enter the schedule 2. Scroll up/down the date list to see program schedule of the corresponding 3. 4. 5. 6.

date. Press the [VOL] button to see the program schedule. Scroll up/down the program schedule to see the previous/next program on the selected date. Press the [VOL] button to return back to the date list. While in program schedule list, press the [OK] button to see more information of

ASUKA HR-630 User Manual

30

the selected program. 7. Press the [EXIT]/[MENU] button to return to the “Channel List”. c. Program Information 1. Select one of the desired TV channel schedule and press the [OK] button. 2. The program information will appear and describe the selected channel. 3. Press the [EXIT]/[MENU] to return to the “Schedule”.

IV.1.2 Audio To select either master or secondary language as well as the audio channel of current service 1. Highlight the “Audio” option on TV menu screen. NOTE: you can also press the [AUDIO] button to enter the “Audio” while enjoying TV. 2. Select the stereo/left/right audio channel and scroll the available language. Press the [OK] button to select the language. 3. Press the [EXIT]/[MENU] key to exit.

IV.1.3 CH Info.(Channel Information) Provide the information of the current service’s system parameters and the signal information 1. Highlight the channel information option. NOTE: you can also press the [INFO] button to enter “Channel Information” while enjoying TV. 2. Press the [OK] button to display the channel information. 3. Press the [EXIT]/[MENU] button to exit.

ASUKA HR-630 User Manual

31

IV.1.4 Auto Search To re-search the available channels automatically 1. Highlight the “Automatic Search” option. NOTE: you can also press the [AUTO SCAN] button to enter the “Automatic Channel Search” while enjoying TV. 2. Press the [OK] button to restart the channel search again. The previous TV channels will be deleted automatically if this function is executed.

IV.1.5 Channel Manager To rearrange and to edit the TV channel listing using skip, move, and delete functions 1. Select “Channel” in the TV Menu and press the [OK] button. The channel manager screen will appear as the picture on the right. 2. Scroll up/down the channel list to enter the editing menu for the chosen channel. 3. Press [EXIT]/[MENU] button to exit anytime.

Skip a Channel 1. After entering the channel editing menu, select the “SKIP” visual-button on screen. 2. Press the [OK] button to activate or deactivate it. NOTE: this function temporarily removes the channel from the program list. The users can restore the channels by deactivating the function.

Channel Movement 1. After entering the channel editing menu, select the “MOVE” visual-button on screen. 2. Move the channel up or down in the list. 3. Press the [OK] button to save the new listing.

Channel Delete 1. After entering the channel editing menu, select the “DELETE” visual-button on ASUKA HR-630 User Manual

32

screen. 2. Press the [OK] button to delete the channel. NOTE: this function will permanently delete the channel from the current program list. Users will only restore the previous channels back by performing the auto search again.

IV.1.6 Display To set up and adjust the image with preference. 1. Highlight the item you want to adjust. 2. Press the [OK] button to activate it.

IV.1.7 TV Setting To configure the subtitle, teletext, and antenna power setting III.1.7.1 Subtitle : to active or deative the subtitle function 1. Select the “Subtitle” option on TV menu screen. NOTE: you can also press the [REC] button to enter the “Subtitle” while enjoying TV. 2. Scroll the available language to activate the subtitle. 3. Press the [EXIT]/[MENU] key to exit III. 1.7.2 Teletext : to enter the teletext menu 1. Select the “Teletext” option on TV menu. NOTE: you can also press the [TTX] button to enter the “Teletext” menu while enjoying TV. 2. Press the [CH] button to view the next page or the [CH] to view the previous teletext page. 3. Press the numerical key button to jump to the specific teletext page. 4. Press the [MENU]/[EXIT] to leave.

ASUKA HR-630 User Manual

33

III.1.7.3 Antenna power : to set up the antenna power 1. Select the “Ant.Power” option on TV menu to enter “Antenna Power” menu. 2. Press the [OK] button to select the power. Note: if the power is “on”, it means that the antenna will have +5V to empower the signal. We suggest to keep this antenna power on to have a better signal reception. 3. Press the [MENU]/[EXIT] button to exit.

ASUKA HR-630 User Manual

34

V. MOVIE Mode In the Movie Menu, the users can adjust the playing mode, repeat mode, aspect ratio, audio, and the subtitle. 1. Press the [MENU] to enter “Menu”. 2. Highlight the item you want to adjust. 3. Select one by pressing the [OK] button or exit the setting by pressing the [EXIT]/[MENU] button. 4. Press the [EXIT]/[MENU] button to exit the “Movie Menu”.

Movie Menu Playing Mode

Repeat Mode

Aspect Ratio

Audio Subtitle

Options

Result

Off

Video file will be played according to the video list

Shuffle

The next vIdeo file will be played randomly

Repeat–OFF

The device will stop, right after playing one video file

Repeat–One

The device will repeat one video file that is currently being played continuously.

Repeat–Dir

The device will repeat all of the video files in one directory that is currently being played continuously.

Full Screen

The video picture will be displayed in full screen

None

The video picture will be displayed according to the video picture ratio

Stereo

Sound will come out from both left&right speakers

Left

Sound will come out only from left speaker

Right

Sound will come out only from right speaker

Languages

Choose one of the available subtitles.

ASUKA HR-630 User Manual

35

VI. MUSIC Mode First, please select the “music” symbol at the start screen menu. After the music has already played, please press the [MENU] button to invoke the music menu. Through this menu, the users can adjust the palying mode, and the repeat mode.

1. Highlight the item you want to adjust. 2. Select one by pressing the [OK] button or exit the setting by pressing the [EXIT]/[MENU] button. 3. After adjusting, press the [EXIT]/[MENU] button to exit. Music Menu Playing Mode

Repeat Mode

Options

Result

Off

Music file will be played according to the music list

Shuffle

Music file will be played randomly

Repeat–OFF

The device will stop, right after playing one music file

Repeat–One

The device will repeat one music file that is currently being played continuously.

Repeat–Dir

The device will repeat all of the music files in one directory that is currently being played continuously.

ASUKA HR-630 User Manual

36

VII.

Radio Mode

Enter the radio section, The section below will explain how you could select preferred radio broadcasting and enjoy the function.

The operation of radio function is shown below:

1. Channel List: Select your preferred radio stations. 2. EPG: To show EPG (Electronic program guide) information about current radio. 3. Current channel: Show the frequency of present channel that you selected. 4. Volume Up: Turn up the voice by pressing or press [Vol+] 5. Volume Down: Turn down your voice by pressing or press [Vol-]

ASUKA HR-630 User Manual

37

VIII. System Setting This is the system settings menu screen. The users can adjust the country/language setting, display setting, HDMI setting, reset default, and proceed to a software upgrade. Use the [VOL] and the [VOL] buttons to highlight the desired item and press the [OK] button to enter one item.

VIII.1 Country/Language To set up the OSD language and regional settings 1. Highlight the item you want to adjust. 2. Select one option by pressing the the [OK] button or exit the setting by pressing the [EXIT]/[MENU] button. 3. After adjusting, press the [EXIT]/[MENU] button to exit the “Country/Language” menu.

VIII.2 Display To set up and adjust the image with preference. 1. Highlight the setting that you want to adjust. 2. Select one by pressing the [OK] button or exit the setting by pressing the [EXIT]/[MENU] button. 3. After adjusting, press the [EXIT]/[MENU] button to exit the “Display” menu.

VIII.3 Monitor Port Setting To

set

up

the

monitor

types

for

integration. 1. Press [OK] button or exit the setting by pressing the [EXIT]/[MENU] button. 2. After adjusting, press the [EXIT]/[MENU] button to exit the “Monitor Port Setting” menu.

ASUKA HR-630 User Manual

38

VIII.4 Steering Wheel Control (SWC) Learning To achieve the SWC learning for 5 major TV function keys, CH+ and CH-, ENTER, EXIT and TV LIST. The procedure to perform SWC learning is summarized as shown below. Before SWC learning, please make sure the connecton wires betweeb SWC signal and HR-630 are well connected. 1.

Start Steering Wheel Control Learning:

2.

Learning Channel up (CH+) Key:

1.1 Back to Main Menu

2.1 Select the “Up Key Learning”

1.2 Enter Setting Mode and select Steering Control

2.2 Press the button of SWC designated for [CH+]

Learning

3. Learning Success

4. Learning Channel Down (CH-) Key:

The “Success” message will pop up when HR-630

4.1 Select the “CH- Key Learning”

successfully gets the key of SWC.

4.2 Press the button of SWC designated for [CH-]

5. Learning ENTER Key:

6. Learning EXIT Key:

5.1 Select the “ENTER Key Lerning”

6.1 Select the “EXIT Key Learning”

5.2 Press the button of SWC designated for [ENTER]

6.2 Press the button of SWC designated for [EXIT]

ASUKA HR-630 User Manual

39

. Learning TV LIST Key: 7.1 Select the “TV LIST Key Learning” 7.2 Press the button of SWC designated for [TV LIST]

ASUKA HR-630 User Manual

40

VIII.5 HDMI Setting To choose AV output through HDMI and adjust output color 1. Highlight the option that you want to adjust. 2. Select one by pressing the [OK] button or exit the setting by pressing the [EXIT]/[MENU] button. 3. After adjusting, press the [EXIT]/[MENU] button to exit the “HDMI Setting” menu.

VIII.6 Antenna Power Setting To set up and adjust the image with preference. 1. Highlight the setting that you want to adjust. 2. Select one by pressing the [OK] button or exit the setting by pressing the [EXIT]/[MENU] button. 3. After adjusting, press the [EXIT]/[MENU] button to exit the “Antenna Power Setting” menu.

VIII.7 Version / Upgrade To upgrade the software version 1. Insert the USB device containing the software upgrade file into the card slot. 2. After entering the Version/Upgrade menu, press the [OK] button to start the upgrade.

VIII.8 Reset Default To reset all settings to factory default 1. Highlight “Reset Default” option and press the [OK] button to reset system settings to factory default. 2. Press the [EXIT] button or select [NO] to exit.

ASUKA HR-630 User Manual

41

IX. Trouble Shooting Q&A Most of the troubleshooting issues can easily be solved. The common cases and their respective solutions are listed in the table below. If the problem is more complicated, please contact the after sales service. Problem Possible Issue Solution The power cord is not properly inserted into the Check the power wire connection. No picture, no unit. audio. The unit is not switched on. Press the [POWER] button on the remote control . Unit is in stand-by mode. The number of available channels is limited due to the local broadcasting Perform the “Auto Search” to rescan system. The available all the channels. In TV mode, the channels can vary number of TV depending on the area. channels is not as Please use the active antennas much as we The signal quality of some instead of passive antennas for better expected. TV channels is too low. reception quality. Only the locally free broadcasted Some TV channels are not channels can be viewed. They can available. vary depending on the area. Please use the active antennas Some TV channels signal instead of the passive antennas for quality is too low. better reception quality. The antennas are not Please check the connection of the In TV mode, all of properly connected. antennas. the channels Check your country TV singnal show “no signal or No DVB-T2 service is coverage map. It is not possible to random mosaic provided in the area. watch digital TV in non-covered tiles appear on the areas. display.” Please check whether “Regional Setting” is correct or not, and please Incorrect regional setting perform “Auto Search” to rescan all of the channels. The audio volume is too Press the [VOL] button to raise the The video is fine low. volume. but there is no Press the [MUTE] button to disable sound. The audio is muted. the mute function. Check the remote control battery. NOTE: the remote control is equipped The remote with a small plastic insulator that must control does not No power. be removed in order to function this work unit. Please check whether the plastic insulator has been removed or not. ASUKA HR-630 User Manual

42

No “line-of-sight” between unit and controller

ASUKA HR-630 User Manual

Ensure there are no obstacle between the controller and the unit.

43

X. Specification RF Input Antenna Frequency range RF input impedance Channel bandwidth TV System Transmission standard

Video/Audio decoder

Active antenna supported (F-Connector) VHF (170-230 MHz) and UHF band (470-862 MHz) 75 Ohm 6/7/8 MHz for DVB-T; 1.7/5/6/7/8/10 MHZ for DVB-T2 ETSI EN 302-755 v1.3.1 standard Support all DVB-T2 modes, including,  Single and multiple-PLPs  SISO and MISO transmission Real time 1080P Full-HD Video Decoder: - MPEG-2(ISO/IEC 13818-2) SD& HD - H.264 (MPEG-4 AVC, ISO/IEC 14496-10) SD & HD

S/W Feature English, German, French, Portuguese, Spanish, Italian, Dutch, Finnish, Traditional Chinese, Thai, Indonesia DVB-T/T2 TV, Auto Channel Search, Multi–Language EPG, Features Steering Wheel Control (SWC) TV/Radio Recording Record TV programs on the USB device Media formats supported Media port USB MP3, WAV, ASF(option), AAC(option), WMA(option), Audio format RM(option) MPEG-I/II/IV, VOB, AVI, DivX, Xvid, MKV, TS, MOV, Video format RMVB(option), FLV(option), WMV(option), ASF(option) Subtitle format SRT, SUB, SSA, ASS, SMI, PSB, TXT, IDX Recorded file format *.tsv (TV recording) Interface 1 Support the USB 2.0 host (for playback and for TV recording) USB port 1 for smart phone charging AV input port 1 A/V Input with RCA connector DVR input port 1 Mini-USB input CCD input port 1 CVBS input with RCA connector  DC Voltage input (Support +12V ~ 24V DC)  IR Signal input Power/IR/SWC port  Steering Wheel Control Signal input (Support voltage:0.2~15V) AV Output 2 CVBS Video out, 1 Audio (L/R) out HDMI Output 1 HDMI output (Type A) UART/RGB output 1 UART, 1RGB output Monitor port Dedicated port for advanced intergration with 2-DIN monitor TV out 2 CVBS video out, 1 Audio (L/R) out, 1 HDMI out Power Input voltage 12-24 V DC Power consumption 6.5 Watt, max Dimension and Weight Dimension 185*130*30 mm Weight 630 g OSD Language

ASUKA HR-630 User Manual

44