UltraCut Operation & Maintenance Manual

February 12, 2019 | Author: Milko Migneco | Category: Belt (Mechanical), Machining, Numerical Control, Wire, Mechanical Engineering
Share Embed Donate


Short Description

UltraCut Wire EDM Flush type operation and maintenance manual...

Description

1. There are diamond dies guide upholding wire correctly & conducting part transferring electric power to wire. 2. Includes a jet nozzle generating water jet necessary for AWT

NO.

Name

Functional description

1

Upper guide block

Upper wire guide body.

2

Seal guide -B

Part for guiding wire to connect on conducting pin.

3

Front guide block

Front guide block has internally revolving ring, conducting pin & seal guide.

4

Sleeve

Guidance of seal guide holder.

5

Seal guide pin

6

Dust cap

7

Indexing ring

8

Conducting ring

9

Jet nozzle

 A pin fixing seal guide, marks a contact of wire with conducting pin in AWT mode, makes it easy to thread wire. Cap protecting invasion of impurities.  A ring to turn conducting pin easily by hands, engraved index numbers on it help operator to identify the rotary position avoiding duplicates of abrasive grooves resulted from electrically discharging during long time use. Electric power is transferred to wire through this device. Due to its consumptive property, turn its rotary position of contacts to index number (1/8 revolution), or if you use up all position, replace it with new part. Flushing water jet in AWT mode.

24-C

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF