Tutorial How to Install Softwares Maptek Vulcan 7

TUTORIAL HOW TO INSTALL softwares MAPTEK Vulcan 7.5 IN WINDOWS 7

First you must create a setting environment variables on your pc.

Right click on Computer and select properties-advance-advance system settings and select environment variables. As the picture below.

And create new variables such as attached below, with new click-and fill in as the parameters below for -HOME -TEMP -TMP Then you save the new variable with click ok-ok 

Back to the master folder Vulcan 7.5 and Vulcan_lic you copy the folder to the directory C: \ 

As the picture below.

Then double-click autorun.exe in the folder within the master installer Vulcan Vulcan 7.5-install drivers and will appear as below.

Then you install the Vulcan until the installation is complete and install the HASP drivers proceed to completion. After that install the sentinel drivers again until the installation is complete. Then proceed with the installation process ANTIHASPHL2008.e xe ANTIHASPHL2008 reply contained in the folder.

Once installed will appear HASP / hardlock emulator 2008 window, select the driver and load-dump and then select 44A30126_full_2.dng

Then it will start service HASP listed as below means that you managed to install HASP / hardlock emulator.

Then after the process had been close wrote ANTIHASP window and return to the installation menu Vulcan Vulcan installed as the first step and select Install the network license (FlexLM) Perform the installation to complete and in the folder C: \ FlexLM folder will appear

As the picture below mean sdh FlexLM installed.

Double click lmtools.exe and like the image below in the config services tab settings as shown below and then save the service. Note: if you're using windows vista and seven copies must replace with new -file lmtools.exe support Windows Vista and 7.

Then move the tab to start / stop / reread When you step prior to this success then it will appear as below and you try to start the server fails stop the klu And repeat start the server and klu already made it back to the menu and save the config before the service again for our settings are stored. If at this stage you fail to do diagnostics on the server tab diags.

Run a Vulcan who had been i nstalled in the existing shortcut on your desktop

If this is the first time you open the Vulcan will be asked the location of license file and bro wse to the folder C: \  Vulcan_lic \ License75.lic

If an error occurs just ignore it and click Accept and close Vulcan earlier and then you open it again f rom the shortcut on your desktop Vulcan. If you successfully license administrator will appear as below. With a floating license type, feature code themselves Vulcankrj the Vulcan ready for use.

And click OK and the initial display appears to envisage the Vulcan 7.5, isis utility plots and settings are active sdh

I posted this tutorial as a way of Vulcan Vulcan installan 7.5 include complicated so if anyone who has not managed to install the 7.5 Vulcan Maybe this could be one of the references.

One more reference you can do wnload the video tutorial install maptek Vulcan 7 in the menu download tutorial.