Truck Specification
April 29, 2017 | Author: Cesar_Arevalo_Jrander | Category: N/A
Short Description
Download Truck Specification...
Description
TRUCKS SPECIFICATION
CIFA_TS_GB_0711_rev04
TRUCKS SPECIFICATION
Page intentionally left empty
TRUCKS SPECIFICATION
TRUCK-MOUNTED CONCRETE PUMP
INFO FOR ALL TRUCKS All trucks equipped with an engine electrical managed must have the electronic control and related electric cables suitable for the external manual command. The trucks delivered to CIFA must have the features listed in this manual.
Important The trucks must respect the manufactures specification depending on the destination country and type of equipment installed.
TRUCKS SPECIFICATION
Page intentionally left empty
TRUCK-MOUNTED CONCRETE PUMP
ASTRA q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
mod.PA
Technical weight Kg
Astra HD 8 4x2
4200
8000
12000
K20L
18000
Astra HD 8 4x2
4600
8000
12000
KZR24
18000
Astra HD 8 6x4
3500/3800 + 1350
8000
19000
KZR24
26000
Astra HD 8 6x4
4100+1350
8000
19000
K2
26000
Astra HD 8 6x4
4100+1350
8000
19000
K31L
26000
Astra HD 8 6x4
4100+1350
8000
19000
K35L
26000
Astra HD 8 6x4
4500+1350
8000
26000
K36*
33000
Astra HD 8 6x4
4500+1450
8000
26000
K38L*
33000
Astra HD 8 8x4
1900+2350+1450
8000+8000
19000
K31L
32000
Astra HD 8 8x4
1900+2350+1450
8000+8000
19000
K36
32000
Astra HD 8 8x4
1900+2350+1450
8000+8000
19000
K35L
32000
Astra HD 8 8x4
1900+2850+1450
8000+8000
19000
K38L
32000
Astra HD 8 8x4
1900+2600/2850+1450
8000+8000
19000
K41L
32000
Astra HD 8 8x4
1900+4100+1450
9000+9000
32000
K48 *
48000
Astra HD 8 8x4
1900+4100+1450
9000+9000
32000
K52L*
48000
Astra HD 8 10x4
1900+4100+1450+1400
9000+9000
32000+12000
K58L *
54000
* Only for area extra CE
* Consider for K48 - K52L - K58L you need road permission
The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.
TRUCK-MOUNTED CONCRETE PUMP
ASTRA q
P.T.O. SPECIFICATIONS PTO Model
ENGINE PTO
Model PA
GEAR BOX PTO
Version PA with PTO
Multipower rapp.1,29 flange din120
ZF NH1-C rapp.0,91/1,09
Version PA HPG with PTO
NMV rapp.1,55 IVECO code CCM 10819
ZF NH1-C rapp.0,91/1,09
q
CHASSIS SPECIFICATIONS
- Short Cabin - 2 flashing light on the top of the cabin - Acustic Horne on truck reverse motion - Cable eletric for PTO (Astra code 029) - Not possible OMSI with electronic gear box
q
ENGINE POWER
Pumping Unit
Model
Min.Engine Power truck (Hp)
PA 709 F8
K20L
280
PA 907 F8
KZR24-KZ26-K2X
240
PA 1506/909 F8
K31L-K2X-K35L-K36-K38L-K41L-K48-K52L
380
PA 1408 IF9 EPC
K31L-K35L-K36-K38L-K41L-K45H
440
K41L-K48-K52L
440
K58L-
480
HPG 1808/1113 IF9
TRUCK-MOUNTED CONCRETE PUMP
IVECO q
TRUCK SPECIFICATIONS Mod. Chassis Euro cargo.
Axel front weight Kg
Axel rear weight Kg
mod.PA
Technical weight Kg
4185
7500
12000
K20L
18000
4200
7500
12000
K20L
18000
Trakker 4x2
4500
8000
12000
KZR24
18000
Trakker 6x4
3500/3820+1380
8000
19000
KZR24
26000
Trakker 6x4
4200+1380
8000
19000
K2
26000
Trakker 6x4
4200+1380
8000
19000
K31L
26000
Trakker 6x4
4200+1380
8000
19000
K35L
26000
Trakker 6x4
4500+1380
8000
19000
K36
26000
Trakker 6x4
4500+1380
8000
26000
K38L *
33000
Trakker 8x4
1875+2375+1380
8000+8000
19000
K31L
32000
Trakker 8x4
1875+2375+1380
8000+8000
19000
K36
32000
Trakker 8x4
1875+2375+1380
8000+8000
19000
K35L
32000
Trakker 8x4
1875+2875+1380
8000+8000
19000
K38L
32000
Trakker 8x4
1875+2875+1380
8000+8000
19000
K41L
32000
Trakker 8x4
1875+3945+1380
9000+9000
26000
K48 *
44000
Trakker 8x4
1875+3945+1380
9000+9000
26000
K52L *
44000
Trakker 10x4
1875+3145+1380+1400
9000+9000
26000+10000
K52L *
54000
Trakker 10x4
1875+4125+1380+1400
9000+9000
26000+12000
K58L *
54000
Trakker
4x2
4x2
WB mm
* Only for area extra CE
* Consider for K48 - K52L - K58L you need road permission
The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.
TRUCK-MOUNTED CONCRETE PUMP
IVECO q
P.T.O. SPECIFICATIONS PTO Model
ENGINE PTO
Model PA
GEAR BOX PTO
Version PA with PTO
Multipower rapp.1,29 flange din120
ZF NH1-C rapp.0,91/1,09
Version PA HPG with PTO
NMV rapp.1,55 IVECO code CCM 10819
ZF NH1-C rapp.0,91/1,09
q
CHASSIS SPECIFICATIONS
- Short Cabin - 2 flashing light on the top of the cabin - Acustic Horne on truck reverse motion - Not possible OMSI with electronic gear box - For chassis 4 and 5 axle we ask for low silence behind 2°axle
q
ENGINE POWER
Pumping Unit
Model
Min.Engine Power truck (Hp)
PA 709 F8
K20L
280
PA 907 F8
KZR24-KZ26-K2X
240
PA 1506/909 F8
K31L-K2X-K35L-K36-K38L-K41L-K48-K52L
380
PA 1408 IF9 EPC
K31L-K35L-K36-K38L-K41L-K45H
440
K41L-K48-K52L
440
K58L-
480
HPG 1808/1113 IF9
TRUCK-MOUNTED CONCRETE PUMP
MERCEDES q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
mod.PA
Technical weight Kg
Actros 4x2
4200
7500
12000
K20L
18000
Actros 4x2
4500
7500
12000
KZR 24
18000
Actros 6x4
3600/3900+1350
7500
19000
KZR 24
26000
Actros 6x4
4200+1350
7500
19000
K2
26000
Actros 6x4
4200+1350
7500
19000
K31L
26000
Actros 6x4
4200+1350
7500
19000
K35L
26000
Actros 6x4
4500+1350
7500
19000
K36
26000
Actros 6x4
4500+1350
7500
26000
K38L*
33000
Actros 8x4
1700+2500+1350
7500+7500
19000
K35L
32000
Actros 8x4
1700+2500+1350
7500+7500
19000
K31L
32000
Actros 8x4
1700+2800+1350
7500+7500
19000
K38L
32000
Actros 8x4
1700+2800/3200+1350
8000+8000
19000
K41L
32000
Actros 32.44 8x4
1700+3700+1350
8000+8000
19000
K45H
32000
Actros 8x4
1700+4200/4400+1350
9000+9000
26000
K48 *
44000
Actros 8x4
1700+4200+1350
9000+9000
26000
K52L *
44000
Actros 10x4
1700+2800+1350+1450
9000+9000
26000+9000
K52L *
54000
Actros 10x4
2020+3980+1350+1350
9000+9000
26000+12000
K58L *
54000
* Only for area extra CE
* Consider for K48 - K52L - K58L you need road permission. Note for K45H: in order to allow a total weight < 32 ton the truck chessis shall weight less than 10.5 ton.
The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.
TRUCK-MOUNTED CONCRETE PUMP
MERCEDES q
P.T.O. SPECIFICATIONS PTO Model
ENGINE PTO
Model PA Version PA with PTO
q
GEAR BOX PTO
PTO NMV 200 Cod. M.B. N 56 rapp.1,48 flange Din 120
Gear box PTO Cod. M.B. NH2
CHASSIS SPECIFICATIONS
- Short Cabin
- Engine Air filter MB code M97
- 2 flashing light on the top of the cabin
- Controller PSM MB code EM8 EM9
- Acustic Horne on truck reverse motion
- Not possible OMSI with electronic gear box
- For HPG pumping Unit engine power 450 Hp
- For K20L min engine power 280 Hp
- Silence type MB code KKH7 (after 2° axle) NO Vertical
q
ENGINE POWER
Pumping Unit
Model
Min.Engine Power truck (Hp)
PA 709 F8
K20L
280
PA 907 F8
KZR24-KZ26-K2X
240
PA 1506/909 F8
K31L-K2X-K35L-K36-K38L-K41L-K48-K52L
380
PA 1408 IF9 EPC
K31L-K35L-K36-K38L-K41L-K45H
440
K41L-K48-K52L
440
K58L-
480
HPG 1808/1113 IF9
TRUCK-MOUNTED CONCRETE PUMP
MAN q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
mod.PA
Technical weight Kg
Man TGS 4x2
4200
7100
11500
K20L
18000
Man TGS 4x2
4500
7500
12000
KZR24
18000
Man TGS 6x4
3600/3900+1400
7500
19000
KZR24
26000
Man TGS 6x4
4200+1400
7500
19000
K35
26000
Man TGS 6x4
4200+1400
7500
19000
K2X
26000
Man TGS 6x4
4200+1400
7500
19000
K31L
26000
Man TGS 6x4
4200+1400
7500
19000
K35L
26000
Man TGS 6x4
4500+1400
7500
19000
K36
26000
Man TGS 6x4
4500+1400
7500
26000
K38L*
33000
* Only for area extra CE Man TGS 8x4
1795+2505+1400
7500+7500
19000
K31L
32000
Man TGS 8x4
1795+2505+1400
7500+7500
19000
K35L
32000
Man TGS 8x4
1795+2980+1400
7500+7500
19000
K38L
32000
Man TGS 8x4
1795+2980/3205+1400
8000+8000
19000
K41L
32000
Man TGS 32.440 BB 1795+3505+1400
8000+8000
19000
K45H
32000
Man TGS 8x4
1795+4105+1400
9000+9000
26000
K48 *
42000
Man TGS 8x4
1795+4105+1400
9000+9000
26000
K52L *
44000
* Consider for K48 - K52L you need road permission Note for ton.
K45H: in order to allow a total weight < 32 ton the truck chessis shall weight less than 10.5
The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.
TRUCK-MOUNTED CONCRETE PUMP
MAN q
P.T.O. SPECIFICATIONS PTO Model
ENGINE PTO
Model PA Version PA with PTO
q
GEAR BOX PTO
NMV 221 rapp.1,55 MAN code 125CMM
ZF NH1-C rapp.0,91/1,09 MAN code 122QHM
CHASSIS SPECIFICATIONS
- Short Cabin
- Lowered bellows on last axle MAN code ZW003M KSW262CN
- 2 flashing light on the top of the cabin
- ECU KSM - MAN code 203ER
- Acustic Horne on truck reverse motion
- Engine start-stop external control MAN code 280HLM
- Silence to shift between 2/3 axle - NO vertical
- Integral air filter Cod.MAN 201AR
- Not possible OMSI with electronic gear box
q
ENGINE POWER
Pumping Unit
Model
Min.Engine Power truck (Hp)
PA 709 F8
K20L
280
PA 907 F8
KZR24-KZ26-K2X
240
PA 1506/909 F8
K31L-K2X-K35L-K36-K38L-K41L-K48-K52L
380
PA 1408 IF9 EPC
K31L-K35L-K36-K38L-K41L-K45H
440
K41L-K48-K52L
440
K58L-
480
HPG 1808/1113 IF9
TRUCK-MOUNTED CONCRETE PUMP
RENAULT q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
mod.PA
Technical weight Kg
Midlum 4x2
4100
6300
10900
K20L
18000
Kerax 4x2
4500
7500
12000
KZR24
18000
Kerax 6x4
3495/3845+1375
7500
19000
KZR24
26000
Kerax 6x4
4195+1375
7500
19000
K2
26000
Kerax 6x4
4195+1375
7500
19000
K31
26000
Kerax 6x4
4195+1375
7500
19000
K35L
26000
Kerax 6x4
4495+1375
7500
19000
K36
26000
Kerax 8x4
2040+2305+1370
7500+7500
19000
K36
32000
Kerax 8x4
2040+2305+1370
7500+7500
19000
K35L
32000
Kerax 8x4
2040+2305+1370
7500+7500
19000
K31L
32000
Kerax 8x4
2040+3005+1370
7500+7500
19000
K38L
32000
Kerax 8x4
2040+2455/3005+1370
8000+8000
19000
K41L
32000
Kerax 8x4
2040+3955+1370
9000+9000
26000
K48 *
44000
Kerax 8x4
2040+3955+1370
9000+9000
26000
K52L *
44000
* Consider for K48 - K52L you need road permission
The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.
TRUCK-MOUNTED CONCRETE PUMP
RENAULT q
P.T.O. SPECIFICATIONS PTO Model
ENGINE PTO
Model PA Version PA with PTO
q
NMV 221 rapp.1,55 flange Din 150
GEAR BOX PTO
PTO ZF 81Z1C rapp.0,92/1,09
CHASSIS SPECIFICATIONS
- Short Cabin - 2 flashing light on the top of the cabin - Acustic Horne on truck reverse motion - ECU BBM Predisposition for bodybilding - Not possible OMSI with electronic gear box - Modification Air filter and silence behind 2°axle. Note see: “info product” see body builder info-predisposition movement SCR and Air filter on www.Renault-truck.com
q
ENGINE POWER
Pumping Unit
Model
Min.Engine Power truck (Hp)
PA 709 F8
K20L
280
PA 907 F8
KZR24-KZ26-K2X
240
PA 1506/909 F8
K31L-K2X-K35L-K36-K38L-K41L-K48-K52L
380
PA 1408 IF9 EPC
K31L-K35L-K36-K38L-K41L-K45H
440
K41L-K48-K52L
440
K58L-
480
HPG 1808/1113 IF9
TRUCK-MOUNTED CONCRETE PUMP
DAF q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
mod.PA
Technical weight Kg
Daf CF 4x2
4200
7500
11500
K20L
18000
Daf CF 4x2
4500
7500
12000
KZR24
18000
Daf CF 6x4
3850+1400
7500
19000
KZR24
26000
Daf CF 6x4
4300+1400
7500
19000
K2X
26000
Daf CF 6x4
4300+1400
7500
19000
K31L
26000
Daf CF 6x4
4300+1400
7500
19000
K35L
26000
Daf CF 6x4
4850+1400
7500
19000
K36
26000
Daf CF 8x4
2050+2300+1400
7500+7500
19000
K31L
32000
Daf CF 8x4
2050+2300+1400
7500+7500
19000
K36
32000
Daf CF 8x4
2050+2300+1400
7500+7500
19000
K35L
32000
Daf CF 8x4
2050+2850+1400
7500+7500
19000
K38L
32000
Daf CF 8x4
2050+2550/2950+1400
8000+8000
19000
K41L
32000
Daf CF 8x4
2050+4100+1400
9000+9000
26000
K48 *
44000
Daf CF 8x4
2050+4100+1400
9000+9000
26000
K52L*
44000
* Consider for K48 - K52L you need road permission
The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.
TRUCK-MOUNTED CONCRETE PUMP
DAF q
P.T.O. SPECIFICATIONS PTO Model
ENGINE PTO
Model PA
GEAR BOX PTO
Version PA with PTO
Engine PTO rapp.1,20 flange DIN 120
ZF NH1-C rapp.0,91/1,09
Version PA HPG with PTO
NMV 221 rapp.1,55 flange 150
ZF NH1-C rapp.0,91/1,09
q
CHASSIS SPECIFICATIONS
- Short Cabin
- Air filter integrated on the cabin
- 2 flashing light on the top of the cabin
- Not possible OMSI with electronic gear box
- Acustic Horne on truck reverse motion - Modification silence behind 2°axle - ECU BBM + software for external control engine
q
ENGINE POWER
Pumping Unit
Model
Min.Engine Power truck (Hp)
PA 709 F8
K20L
280
PA 907 F8
KZR24-KZ26-K2X
240
PA 1506/909 F8
K31L-K2X-K35L-K36-K38L-K41L-K48-K52L
380
PA 1408 IF9 EPC
K31L-K35L-K36-K38L-K41L-K45H
440
K41L-K48-K52L
440
K58L-
480
HPG 1808/1113 IF9
TRUCK-MOUNTED CONCRETE PUMP
VOLVO q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
mod.PA
Technical weight Kg
Volvo FLH4x2
4100
7100
11500
K20L
18000
Volvo FM4x2
4600
7500
12000
KZR24
18000
Volvo FM 6x4
3500/3900+1370
7500
19000
KZR24
26000
Volvo FM 6x4
4300+1370
7500
19000
K2
26000
Volvo FM 6x4
4300+1370
7500
19000
K31L
26000
Volvo FM 6x4
4300+1370
7500
19000
K35L
26000
Volvo FM 6x4
4600+1370
7500
19000
K36
26000
Volvo FM8x4
1995+2305+1370
7500+7500
19000
K31L
32000
Volvo FM8x4
1995+2305+1370
7500+7500
19000
K36
32000
Volvo FM8x4
1995+2305+1370
7500+7500
19000
K35L
32000
Volvo FM8x4
1995+2605+1370
7500+7500
19000
K38L
32000
Volvo FM8x4
1995+2605/2905+1370
8000+8000
19000
K41L
32000
Volvo FM8x4
1995+4105+1370
9000+9000
26000
K48 *
44000
Volvo FM8x4
1995+4105+1370
9000+9000
32000
K52L*
44000
Volvo FM10x4
1995+4005+1370+1400
9000+9000
32000+10000
K58L*
54000
* Consider for K48 - K52L - K58L you need road permission
The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.
TRUCK-MOUNTED CONCRETE PUMP
VOLVO q
P.T.O. SPECIFICATIONS PTO Model
ENGINE PTO
Model PA
GEAR BOX PTO
Note: Truck configuration only with coupler OMSI
q
CHASSIS SPECIFICATIONS
- Short Cabin
- Air filter integrated on the cabin
- 2 flashing light on the top of the cabin
- Not possible OMSI with electronic gear box
- Acustic Horne on truck reverse motion - ECU BBM Predisposition for bodybilding - For chassis 4 and 5 axle we ask for low silence behind 2°axle
q
ENGINE POWER
Pumping Unit
Model
Min.Engine Power truck (Hp)
PA 709 F8
K20L
280
PA 907 F8
KZR24-KZ26-K2X
240
PA 1506/909 F8
K31L-K2X-K35L-K36-K38L-K41L-K48-K52L
380
PA 1408 IF9 EPC
K31L-K35L-K36-K38L-K41L-K45H
440
K41L-K48-K52L
440
K58L-
480
HPG 1808/1113 IF9
TRUCK-MOUNTED CONCRETE PUMP
SCANIA q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
mod.PA
Technical weight Kg
Serie P/R 4x2
4100
7100
11500
K20L
18000
Serie P/R 4x2
4500
7500
12000
KZR24
18000
Serie P/R 6x4
3500/3900+1445
7500
19000
KZR24
26000
Serie P/R 6x4
4100+1445
7500
19000
K2
26000
Serie P/R 6x4
4100+1445
7500
19000
K31L
26000
Serie P/R 6x4
4100+1445
7500
19000
K35L
26000
Serie P/R 6x4
4500+1445
7500
19000
K36
26000
Serie P/R 8x4
1940+2160+1445
7500+7500
19000
K36
32000
Serie P/R 8x4
1940+2160+1445
7500+7500
19000
K35L
32000
Serie P/R 8x4
1940+2160+1445
7500+7500
19000
K31L
32000
Serie P/R 8x4
1940+2960+1445
7500+7500
19000
K38L
32000
Serie P/R 8x4
1940+2560/2960+1445
8000+8000
19000
K41L
32000
Serie P/R 8x4
1940+3960/4160+1445
9000+9000
26000
K48 *
44000
Serie P/R 8x4
1940+3960/4160+1445
9000+9000
32000
K52L *
44000
Serie P/R 10x4
1940+2560+1445+1305
9000+9000
30000+9000
K52L*
54000
Serie CB 10x4
1940+4160+1445+1305
9000+9000
30000+9000
K58L*
54000
* Consider for K48 - K52L - K58L you need road permission
The height of the chassis of the truck must not exceed 1200mm CIFA SpA call for heights of over.
TRUCK-MOUNTED CONCRETE PUMP
SCANIA q
P.T.O. SPECIFICATIONS PTO Model
ENGINE PTO
Model PA
GEAR BOX PTO
Note: Truck configuration only with coupler OMSI
q
CHASSIS SPECIFICATIONS
- Short Cabin-CP14
- Air filter integrated on the cabin
- 2 flashing light on the top of the cabin
- program system for central unit SOPS fonic wheel 6 teeth
- Acustic Horne on truck reverse motion
- ECU BWS Predisposition for bodybilder
- Not possible OMSI with electronic gear box - For chassis 4 and 5 axle we ask for low silence behind 2°axle
q
ENGINE POWER
Pumping Unit
Model
Min.Engine Power truck (Hp)
PA 709 F8
K20L
280
PA 907 F8
KZR24-KZ26-K2X
240
PA 1506/909 F8
K31L-K2X-K35L-K36-K38L-K41L-K48-K52L
380
PA 1408 IF9 EPC
K31L-K35L-K36-K38L-K41L-K45H
440
K41L-K48-K52L
440
K58L-
480
HPG 1808/1113 IF9
TRUCKS SPECIFICATION
MAGNUM
INFO FOR ALL TRUCKS All trucks equipped with an engine electrical managed must have the electronic control and related electric cables suitable for the external manual command. The trucks delivered to CIFA must have the features listed in this manual. All veicols with festures different from the following specification should cause delay on delivery and the charge for the modification needed.
Important The trucks must respect the manufactures specification depending on the destination country and type of equipment installed.
TRUCKS SPECIFICATION
Page intentionally left empty
MAGNUM
ASTRA q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
model
Technical weight Kg
HD8 - 6x4
3500+1450
8000
13000+13000
80MK24
33000
HD8 - 8x4
1900+2350+1450
8000+8000
13000+13000
80MK20
40000
HD8 - 8x4
1900+2350+1450
8000+8000
13000+13000
80MK24
40000
HD8 - 8x4
1900+2350+1450
8000+8000
13000+13000
80MK28L
40000
HD8 - 8x4
1900+2350+1450
8000+8000
13000+13000
115MK24
40000
HD8 - 8x4
1900+2350+1450
8000+8000
13000+13000
115MK28L
40000
HD8 - 8x4
1900+2350+1450
8000+8000
13000+13000
115MK32L
40000
MAGNUM
ASTRA q
MOTORIZATION SPECIFICATIONS Model PTO
Model Magnum
ENGINE PTO MULTIPOWER ratio 1-1.29 900Nm FLANGE DIN 120-8 holes
RH PTO PB607L-GPT405
l
RH OMSI PB607L
l
GEAR BOX PTO DOUBLE ZF.N221/10 rapp.1.36-1.62 FLANGE DIN 100-6 Holes and NL/1-C ratio 0.91-1.09 overturned version low direction on the right.
GEAR BOX PTO SINGLE ZF NH1-C ratio 0.91-1.09
l
RHS PB607L RH OMSI PB808L
q
ENGINE MOTOR
l l
l
CHASSIS SPECIFICATIONS
- SHORT CABIN
- ELECTRIC CABLE PTO (Astra code 029)
- 2 FLASHING LIGHT ON THE TOP OF THE CABIN
-GEAR BOX PTO DOUBLE WITH FLANGE IN LOW
- ACUSTIC HORNE ON TRUCK REVERSE MOTION - PREDISPOSITION LATERAL MARKER LIGTH
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
MAGNUM
IVECO q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
mod.MA
Technical weight Kg
TRAKKER 6x4
3500+1380 3820+1380
8000
13000+13000
80MK24
33000
TRAKKER 8x4
1875+2375+1380
8000+8000
13000+13000
80MK20
41000
TRAKKER 8x4
1875+2375+1380
8000+8000
13000+13000
80MK24
41000
TRAKKER 8x4
1875+2375+1380
8000+8000
13000+13000
80MK28L
41000
TRAKKER 8x4
1875+2375+1380
8000+8000
13000+13000
115MK24
41000
TRAKKER 8x4
1875+2375+1380
8000+8000
13000+13000
115MK28L
41000
TRAKKER 8x4
1875+2375+1380
8000+8000
13000+13000
115MK32L
41000
MAGNUM
IVECO q
MOTORIZATION SPECIFICATIONS PTO Model
ENGINE PTO MULTIPOWER ratio 1-1.29 flange DIN 120-8 holes 900Nm
Model Magnum RH PTO PB607L-GPT405
l
RH OMSI PB607L
l
GEAR BOX PTO DOUBLE ZF.N221/10 ratio 1.36-1.62 flange DIN 100-6 holes and NL/1-C ratio 0.91-1.09 overturned version low direction on the right.
GEAR BOX PTO SINGLE ZF NH1-C ratio 0.91-1.09
l
RHS PB607L
l
RH OMSI PB808L
q
ENGINE MOTOR
l
l
CHASSIS SPECIFICATIONS
- SHORT CABIN
-GEAR BOX PTO DOUBLE WITH FLANGE IN LOW
- 2 FLASHING LIGHT ON THE TOP OF THE CABIN - ACUSTIC HORNE ON TRUCK REVERSE MOTION - LOW VERSION SILENCER 2°/3° AXLE (no Vertical) - PREDISPOSITION LATERAL MARKER LIGTH
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
MAGNUM
MERCEDES q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
ACTROS 6x4
3600+1350
8000
13000+13000
ACTROS 8x4
1700+2500+1350 1700+2800+1350
8000+8000
13000+13000
80MK20
41000
ACTROS 8x4
1700+2500+1350 1700+2800+1350
8000+8000
13000+13000
80MK24
41000
ACTROS 8x4
1700+2500+1350 1700+2800+1350
8000+8000
13000+13000
80MK28L
41000
ACTROS 8x4
1700+2500+1350 1700+2800+1350
8000+8000
13000+13000
115MK24
41000
ACTROS 8x4
1700+2500+1350 1700+2800+1350
8000+8000
13000+13000
115MK28L
41000
ACTROS 8x4
1700+2500+1350 1700+2800+1350
8000+8000
13000+13000
115MK32L
41000
model 80MK24
Technical weight Kg 33000
MAGNUM
MERCEDES q
MOTORIZATION SPECIFICATIONS Model PTO
Model Magnum
ENGINE PTO
ENGINE PTO
MB-N52-1,15 Flange:DIN 100 6 holes-600Nm
MB-N56-1,48 Flange: DIN 120 8 holes-1500Nm
RH PTO PB607L-GPT405
l
RH OMSI PB607L
l
GEAR BOX PTO DOUBLE MB-ND7-1,36/1,62
GEAR BOX PTO SINGLE MB-NH2C 1,07/1,29
ENGINE MOTOR
l l
RHS PB607L
l
RH OMSI PB808L
q
l
CHASSIS SPECIFICATIONS
- ELASTIC JOINT MB Type N54
- PSM ELECTRONIC GEARBOX (MB code EM 8/9)
- 2 FLASHING LIGHT ON THE TOP OF THE CABIN
- PTO version: Movement AD BLU CENTRAL (See Note*)
- ACUSTIC HORNE ON TRUCK REVERSE MOTION
- ENGINE AIR FILTER (MB code M97)
- PREDISPOSITION LATERAL MARKER LIGTH
- GEAR BOX PTO DOUBLE WITH FLANGE IN HIGH
- SHORT CABIN: VERTICAL EXHAUST SILENCE (MB code K68) - MEDIUM CABIN: EXHAUST SILENCE (2°-3° AXLE) MB code KKH7 Only 80 MK Model
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
Note * -Movement AD BLU 600 mm towards rear
MAGNUM
MAN q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
TGS 6x4
3600+1400 3900+1400
8000
13000+13000
TGS 8x4
1795+2505+1400
8000+8000
13000+13000
80MK20
41000
TGS 8x4
1795+2505+1400
8000+8000
13000+13000
80MK24
41000
TGS 8x4
1795+2505+1400
8000+8000
13000+13000
TGS 8x4
1795+2505+1400
8000+8000
13000+13000
115MK24
41000
TGS 8x4
1795+2505+1400
8000+8000
13000+13000
115MK28L
41000
TGS 8x4
1795+2505+1400
8000+8000
13000+13000
115MK32L
41000
modell 80MK24
80MK28L
Technical weight Kg 33000
41000
MAGNUM
MAN q
MOTORIZATION SPECIFICATIONS Model PTO
Model Magnum
ENGINE PTO PTO MAN Cod. 120KH ratio 1,23 - 870Nm
RH PTO PB607L-GPT405
l
RH OMSI PB607L
l
GEAR BOX PTO DOUBLE ZF 221/10B -R. 1,35/1,62 flange 100 -6 holes. Cod. MAN 122 IP + ZF NL1C cod. MAN 122 OV
GEAR BOX PTO SINGLE ZF NH1C MAN code 122 QHM
l
RHS PB607L
l
RH OMSI PB808L
q
ENGINE MOTOR
l
l
CHASSIS SPECIFICATIONS
- SHORT CABIN
START/STOP ESTERNAL CONTROL (Code 280 HLM)
- 2 FLASHING LIGHT ON THE TOP OF THE CABIN
- SILENCER TO SHIFT BETWEEN 2nd and 3rd AXLE (See drawing)
- ACUSTIC HORNE ON TRUCK REVERSE MOTION
- ENGINE AIR FILTER (Code 201 ASS)
- PREDISPOSITION LATERAL MARKER LIGTH
GEAR BOX PTO DOUBLE WITH FLANGE IN LOW
- LOWERED BELLOWS ON 4th AXLE (Code KSW 262 CN) - KSM ELECTRONIC GEARBOX (code 203 ER)
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
MAGNUM
RENAULT q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
model
Technical weight Kg
KERAX 6x4
3495 + 1370 3845 + 1370
8000
13000+13000
80MK24
33000
KERAX 8x4
2040+2305+1370 2040+2455+1370
8000+8000
13000+13000
80MK20
41000
KERAX 8x4
2040+2305+1370 2040+2455+1370
8000+8000
13000+13000
80MK24
41000
KERAX 8x4
2040+2305+1370 2040+2455+1370
8000+8000
13000+13000
80MK28L
41000
KERAX 8x4
2040+2305+1370 2040+2455+1370
8000+8000
13000+13000
115MK24
41000
KERAX 8x4
2040+2305+1370 2040+2455+1370
8000+8000
13000+13000
115MK28L
41000
KERAX 8x4
2040+2305+1370 2040+2455+1370
8000+8000
13000+13000
115MK32L
41000
MAGNUM
RENAULT q
MOTORIZATION SPECIFICATIONS Model PTO
Model Magnum
ENGINE PTO PAM 100 ratio 1-1,08 flange DIN100 6 holes 800Nm
RH PTO PB607L-GPT405
l
RH OMSI PB607L
l
GEAR BOX PTO DOUBLE ZF 221/10B ratio 1,35/1,62 Flange 100 6 holes + 81Z2-C ratio 0,77/0,92 overturned version low direction on the right.
GEAR BOX PTO SINGLE 81Z1C - Ratio 0.92-1.09
l
RHS PB607L RH OMSI PB808L
q
ENGINE MOTOR
l l
l
CHASSIS SPECIFICATIONS
- SHORT CABIN
- ECU BBM PREDISPOSITION FOR BODYBUILDER
- 2 FLASHING LIGHT ON THE TOP OF THE CABIN
-GEAR BOX PTO DOUBLE WITH FLANGE IN LOW
- ACUSTIC HORNE ON TRUCK REVERSE MOTION - PREDISPOSITION LATERAL MARKER LIGTH - MODIFY EXHAUST SYSTEM AFTER 2nd AXLE AND ENGINE AIR FILTER (See Note “ MOVEMENT PREDISPOSITION SCR AND ENGINE AIR FILTER” ON WEB SITE - www.Renault-truck.com)
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
MAGNUM
DAF q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
model
Technical weight Kg
CF 85 FAT 6x4
3850+1400
8000
13000+13000
80MK24
33000
CF 85 FAD 8x4
2050+2300+1400
8000+8000
13000+13000
80MK20
41000
CF 85 FAD 8x4
2050+2300+1400
8000+8000
13000+13000
80MK24
41000
CF 85 FAD 8x4
2050+2300+1400
8000+8000
13000+13000
80MK28L
41000
CF 85 FAD 8x4
2050+2300+1400
8000+8000
13000+13000
115MK24
41000
CF 85 FAD 8x4
2050+2300+1400
8000+8000
13000+13000
115MK28L
41000
CF 85 FAD 8x4
2050+2300+1400
8000+8000
13000+13000
115MK32L
41000
MAGNUM
DAF q
MOTORIZATION SPECIFICATIONS Model PTO
Model Magnum
ENGINE PTO ENGINE PTO Flange DIN 120 8 holes ratio 1:1,20 800Nm
RH PTO PB607L-GPT405
l
RH OMSI PB607L
l
GEAR BOX PTO DOUBLE ZF N.221/10B ratio 1,36-162 Flange DIN 100 6 holes + ZF NL 1C ratio 0,91-1,09 overturned version low direction on the right.
GEAR BOX PTO SINGLE ZF NH1C ratio 0.91-1.09
l
RHS PB607L RH OMSI PB808L
q
ENGINE MOTOR
l l
l
CHASSIS SPECIFICATIONS
- SHORT CABIN
- MOVEMENT EXHAUST SYSTEM AFTER 2nd AXLE (8x4) - See Bulletin CIFA Mktg 01/2008.
- 2 FLASHING LIGHT ON THE TOP OF THE CABIN
- MOVEMENT EXHAUST SYSTEM 500 mm TOWARDS THE REAR (6x4) - See Bulletin CIFA Mktg 01/2008.
- ACUSTIC HORNE ON TRUCK REVERSE MOTION
ECU-BBM PREDISPOSITION FOR BODYBUILDER
- PREDISPOSITION LATERAL MARKER LIGTH
SOFTWARE BBM+SC FOR EXTERNAL CONTROL ENGINE (Cod.DAF 1690720 SELCO 0797)
- ENGINE AIR FILTER INTEGRATED IN THE CABIN
-GEAR BOX PTO DOUBLE WITH FLANGE IN LOW
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
MAGNUM
VOLVO q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
model
Technical weight Kg
FM 6x4
3700+1370 3900+1370
8000
13000+13000
80MK24
33000
FM 8x4
1995+2305+1370 1995+2605+1370
8000+8000
13000+13000
80MK20
41000
FM 8x4
1995+2305+1370 1995+2605+1370
8000+8000
13000+13000
80MK24
41000
FM 8x4
1995+2305+1370 1995+2605+1370
8000+8000
13000+13000
80MK28L
41000
FM 8x4
1995+2305+1370 1995+2605+1370
8000+8000
13000+13000
115MK24
41000
FM 8x4
1995+2305+1370 1995+2605+1370
8000+8000
13000+13000
115MK28L
41000
FM 8x4
1995+2305+1370 1995+2605+1370
8000+8000
13000+13000
115MK32L
41000
MAGNUM
VOLVO q
MOTORIZATION SPECIFICATIONS Model PTO
Model Magnum
ENGINE PTO
ENGINE PTO
GEAR BOX PTO DOUBLE
PTER 1400 ratio 1-1,26 flange SAE 1400 4 holes EPTT 650NM
PTER 1400 ratio 1-1,26 flange SAE 1400 4 holes EPTT 1000Nm
PTRD D1 rapp. 1-1,30/1,62 flangia SAE and enclosed heat exchanger
RH PTO PB607L-GPT405
l
RH OMSI PB607L
l
GEAR BOX PTO SINGLE PTRD-D ratio 1.08-1.12
l
RHS PB607L
l
RH OMSI PB808L
q
ENGINE MOTOR
l
l
CHASSIS SPECIFICATIONS
- SHORT CABIN
- 2 FLASHING LIGHT ON THE TOP OF THE CABIN
- ACUSTIC HORNE ON TRUCK REVERSE MOTION
- FOR MODIFICATION EXHAUST SYSTEM AFTER 2nd AXLE See “SERVICE INFO” on VOLVO WEB SITE.
- PREDISPOSITION LATERAL MARKER LIGTH
- ENGINE AIR FILTER INTEGRATED IN THE CABIN
- ECU BBM PREDISPOSITION FOR BODYBUILDER
-GEAR BOX PTO DOUBLE WITH FLANGE IN HIGH
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
MAGNUM
SCANIA q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
model
Technical weight Kg
SERIE P.R 6x4
3700+1445 3900+1445
8000
13000+13000
80MK24
33000
SERIE P.R 8x4
1940+2360+1445 1940+2560+1445
8000+8000
13000+13000
80MK20
41000
SERIE P.R 8x4
1940+2360+1445 1940+2560+1445
8000+8000
13000+13000
80MK24
41000
SERIE P.R 8x4
1940+2360+1445 1940+2560+1445
8000+8000
13000+13000
80MK28L
41000
SERIE P.R 8x4
1940+2360+1445 1940+2560+1445
8000+8000
13000+13000
115MK24
41000
SERIE P.R 8x4
1940+2360+1445 1940+2560+1445
8000+8000
13000+13000
115MK28L
41000
SERIE P.R 8x4
1940+2360+1445 1940+2560+1445
8000+8000
13000+13000
115MK32L
41000
MAGNUM
SCANIA q
MOTORIZATION SPECIFICATIONS Model PTO
Model Magnum
ENGINE PTO EK 740 ratio 1:1 Flange SAE 1400 4 holes 2000Nm
RH PTO PB607L-GPT405
l
RH OMSI PB607L
l
GEAR BOX PTO DOUBLE EG 661 ratio 1,28:1,58 Flange SAE 1400
GEAR BOX PTO SINGLE EG 652 ratio 0,82:1,03 only Gear GRS 0905
l
RHS PB607L RH OMSI PB808L
q
ENGINE MOTOR
l l
l
CHASSIS SPECIFICATIONS
- SHORT CABIN CP 14 or CP 16
- MEDIUM CABIN CG 16 (Contact CIFA Technical Dep.)
- 2 FLASHING LIGHT ON THE TOP OF THE CABIN
- MEDIUM CABIN CR 16 (Not Available)
- ACUSTIC HORNE ON TRUCK REVERSE MOTION
- ENGINE AIR FILTER INTEGRATED IN THE CABIN
- PREDISPOSITION LATERAL MARKER LIGTH
- ECU BWS predisposition for bodybuilder
- FOR MODIFICATION EXHAUST SYSTEM AND BATTERIE BOX AFTER 2nd AXLE
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
TRUCKS SPECIFICATION
TRUCK MIXER
INFO FOR ALL TRUCKS All trucks equipped with an engine electrical managed must have the electronic control and related electric cables suitable for the external manual command. The trucks delivered to CIFA must have the features listed in this manual. All trucks with festures different from the following specification should cause delay on delivery and the charge for the modification needed.
Important The trucks must respect the manufactures specification depending on the destination country and type of equipment installed.
Page intentionally left empty
TRUCK MIXER
ASTRA q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
modello
Technical weight Kg
HD8 - 6x4
3500+1450
8000
19000
SL7/SLA7
33000
HD8 - 6x4
3500+1450
8000
26000
SL8/SLA8
33000
HD8 - 6x4
3800+1450
9000
32000
SL9
40000
HD8 - 8x4
4250+1450
7500+7500
26000
SL9/SLA9
41000
HD8 - 8x4
4250+1450
8000+8000
26000
SL10/SLA10
41000
HD8 - 8x4
4750+1450
8000+8000
32000
SL12/SLA12
48000
HD8 - 8x4
4750+1450
9000+9000
32000
HD12+*
48000
* only for area extra CE
q
MOTORIZATION SPECIFICATIONS Model PTO
Model TRUCK MIXER
ENGINE PTO MULTIPOWER ratio 1,29 900Nm FLANGE DIN 120-8 holes
SL 7/SL8/SL9/SL10/SL12
l
SLA7/SLA8/SLA9/SLA10/SLA12
q
ENGINE MOTOR
l
CHASSIS SPECIFICATIONS
- SHORT CABIN - 2 FLASHING LIGHT ON THE TOP OF THE CABIN - ACUSTIC HORNE ON TRUCK REVERSE MOTION - ELECTRIC PREDISPOSITION FOR PTO CON.ASTRA 029
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
TRUCK MIXER
IVECO q
TRUCK SPECIFICATIONS WB mm
Axel front weight Kg
Axel rear weight Kg
model
Technical weight Kg
TRAKKER 6x4
3500+1380
7500
19000
SL7/SLA7
33000
TRAKKER 6x4
3500/3820+1380
7500
26000
SL8/SLA8
33000
TRAKKER 6x4
3820+1380
9000
32000
SL9
40000
TRAKKER 8x4
4250+1380
7500+7500
26000
SL9/SLA9
41000
TRAKKER 8x4
4250+1380
8000+8000
26000
SL10/SLA10
41000
TRAKKER 8x4
5020+1380
8000+8000
29200
SL12
45000
TRAKKER 8x4
5020+1380
8000+8000
29200
SLA12
45000
TRAKKER 8x4
5020+1380
8000+8000
29200
HD12+*
45000
Mod. Chassis
* only for area extra CE
q
MOTORIZATION SPECIFICATIONS Model PTO
Model TRUCK MIXER
ENGINE PTO MULTIPOWER rate 1,29 900Nm FLANGE DIN 120-8 holes
SL 7/SL8/SL9/SL10/SL12 SLA7/SLA8/SLA9/SLA10/SLA12
q
ENGINE MOTOR
l l
CHASSIS SPECIFICATIONS
- SHORT CABIN - 2 FLASHING LIGHT ON THE TOP OF THE CABIN - ACUSTIC HORNE ON TRUCK REVERSE MOTION
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
TRUCK MIXER
MERCEDES q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
model
Technical weight Kg
AXOR ACTROS 6x4
3600+1350
7500
19000
SL7/SLA7
33000
AXOR ACTROS 6x4
3600+1350
7500
26000
SL8/SLA8
33000
ACTROS 6X4
3900+1350
9000
32000
SL9
40000
AXOR ACTROS 8x4
4200+1350
7500+7500
26000
SL9/SLA9
41000
AXOR ACTROS 8x4
4200+1350
8000+8000
26000
SL10/SLA10
41000
AXOR ACTROS 8x4
4500+1350
8000+8000
32000
SL12
48000
AXOR ACTROS 8x4
5100+1350
8000+8000
32000
SLA12
48000
AXOR ACTROS 8x4
5100+1350
9000+9000
32000
HD12+*
48000
* only for area extra CE
q
MOTORIZATION SPECIFICATIONS Model PTO
Model TRUCK MIXER
ENGINE PTO PTO MB N52 rate 1,15 600Nm Flange DIN 100 6 holes
SL 7/SL8/SL9/SL10/SL12
ENGINE MOTOR
l l
SLA7/SLA8/SLA9/SLA10/SLA12
q
CHASSIS SPECIFICATIONS
- SHORT CABIN
- ECU PSM (MB code EM8/9)
- 2 FLASHING LIGHT ON THE TOP OF THE CABIN - ACUSTIC HORNE ON TRUCK REVERSE MOTION - ELASTIC JOINT (MB code N54) Only SL Model
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
TRUCK MIXER
MAN q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
model
Technical weight Kg
MAN TGS 6x4
3600+1400
7500
19000
SL7/SLA7
33000
MAN TGS 6x4
3600+1400
7500
26000
SL8/SLA8
33000
MAN TGS 6X4
3900+1400
9000
32000
SL9
40000
MAN TGS 8x4
4300+1400
7500+7500
26000
SL9/SLA9
41000
MAN TGS 8x4
4300+1400
8000+8000
26000
SL10/SLA10
41000
MAN TGS 8x4
4775+1400
8000+8000
32000
SL12/SLA12
48000
MAN TGS 8x4
4775+1400
9000+9000
32000
HD12+*
48000
* only for area extra CE
q
MOTORIZATION SPECIFICATIONS Model PTO
Model TRUCK MIXER
ENGINE PTO PTO MAN COD. 120KH rate 1,23 870Nm Flange DIN 100 6 holes
SL 7/SL8/SL9/SL10/SL12 SLA7/SLA8/SLA9/SLA10/SLA12
q
ENGINE MOTOR
l l
CHASSIS SPECIFICATIONS
- SHORT CABIN - 2 FLASHING LIGHT ON THE TOP OF THE CABIN - ACUSTIC HORNE ON TRUCK REVERSE MOTION - ECU KSM (MAN code 203ER)
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
TRUCK MIXER
RENAULT q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
model
technical weight Kg
KERAX 6x4
3495+1375
7500
19000
SL7/SLA7
33000
KERAX 6x4
3495+1375
7500
26000
SL8/SLA8
33000
KERAX 6x4
3850+1375
9000
32000
SL9
40000
KERAX 8x4
4345+1370
7500+7500
26000
SL9/SLA9
41000
KERAX 8x4
4345+1370
8000+8000
26000
SL10/SLA10
41000
KERAX 8x4
4495+1370
8000+8000
32000
SL12
48000
KERAX 8x4
5045+1370
8000+8000
32000
SLA12
48000
KERAX 8x4
5045+1370
8000+8000
32000
HD12+*
48000
* only for area extra CE
q
MOTORIZATION SPECIFICATIONS Model PTO
Model TRUCK MIXER
ENGINE PTO PTO RENAULT PAM 100 rate 1,08 800Nm Flange DIN 100
SL 7/SL8/SL9/SL10/SL12 SLA7/SLA8/SLA9/SLA10/SLA12
q
ENGINE MOTOR
l l
CHASSIS SPECIFICATIONS
- SHORT CABIN
- ECU BBM PREDISPOSITION FOR BODYBUILDER
- 2 FLASHING LIGHT ON THE TOP OF THE CABIN - ACUSTIC HORNE ON TRUCK REVERSE MOTION
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
TRUCK MIXER
DAF q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
model
Technical weight Kg
CF 6x4
3350/3850+1400
7500
19000
SL7/SLA7
33000
CF 6x4
3350/3850+1400
7500
26000
SL8/SLA8
33000
CF 6x4
3850+1400
9000
32000
SL9
40000
CF 8x4
4350+1400
7500+7500
26000
SL9/SLA9
41000
CF 8x4
4350+1400
8000+8000
26000
SL10/SLA10
41000
CF 8x4
4600+1400
8000+8000
32000
SL12
48000
CF 8x4
5000+1400
8000+8000
32000
SLA12
48000
CF 8x4
5000+1400
9000+9000
32000
HD12+*
48000
* only for area extra CE
q
MOTORIZATION SPECIFICATIONS Model PTO
Model TRUCK MIXER
ENGINE PTO ENGINE PTO Ratio 1. 1,2 800Nm Flange DIN 120 8 holes - anticlockwise rotation
SL 7/SL8/SL9/SL10/SL12
ENGINE MOTOR
l l
SLA7/SLA8/SLA9/SLA10/SLA12
q
CHASSIS SPECIFICATIONS
- SHORT CABIN
- ECU BBM PREDISPOSITION FOR BODYBUILDER
- 2 FLASHING LIGHT ON THE TOP OF THE CABIN - ACUSTIC HORNE ON TRUCK REVERSE MOTION
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
TRUCK MIXER
VOLVO q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
model
Technical weight Kg
FM 6x4
3400/3700+1370
7500
19000
SL7/SLA7
33000
FM 6x4
3400/3700+1370
7500
26000
SL8/SLA8
33000
FM 6x4
3900+1370
9000
32000
SL9
40000
FM 8x4
4300+1370
7500+7500
26000
SL9/SLA9
41000
FM 8x4
4300+1370
8000+8000
26000
SL10/SLA10
41000
FM 8x4
4600+1370
8000+8000
32000
SL12
48000
FM 8x4
4900+1370
8000+8000
32000
SLA12
48000
FM 8x4
5100+1370
9000+9000
32000
HD12+*
48000
* only for area extra CE
q
MOTORIZATION SPECIFICATIONS Model PTO
Model TRUCK MIXER
ENGINE PTO PTO VOLVO PTER 1400 rate 1,26 Flange SAE 1400 EPTT 650NM
SL 7/SL8/SL9/SL10/SL12 SLA7/SLA8/SLA9/SLA10/SLA12
q
ENGINE MOTOR
l l
CHASSIS SPECIFICATIONS
- SHORT CABIN
- ECU BBM PREDISPOSITION FOR BODYBUILDER
- 2 FLASHING LIGHT ON THE TOP OF THE CABIN - ACUSTIC HORNE ON TRUCK REVERSE MOTION
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
TRUCK MIXER
SCANIA q
TRUCK SPECIFICATIONS Mod. Chassis
WB mm
Axel front weight Kg
Axel rear weight Kg
model
Technical weight Kg
SERIE P/R 6x4
3500/3700+1445
7500
19000
SL7/SLA7
33000
SERIE P/R 6x4
3500+1445
7500
26000
SL8
33000
SERIE P/R 6x4
3700+1445
7500
26000
SLA8
33000
SERIE P/R 6x4
3900+1445
9000
32000
SL9
40000
SERIE P/R 8x4
4100+1445
8000+8000
26000
SL9/SLA9
41000
SERIE P/R 8x4
4300+1445
8000+8000
26000
SL10/SLA10
41000
SERIE P/R 8x4
4500+1445
8000+8000
32000
SL12
48000
SERIE P/R 8x4
4700+1370
8000+8000
32000
SLA12
48000
SERIE P/R 8x4
4700+1370
9000+9000
32000
HD12+*
48000
* only for area extra CE
q
MOTORIZATION SPECIFICATIONS Model PTO
Model TRUCK MIXER
ENGINE PTO PTO SCANIA EK 740 rate 1,1 2000Nm Flange SAE 1400
SL 7/SL8/SL9/SL10/SL12
l
SLA7/SLA8/SLA9/SLA10/SLA12
q
ENGINE MOTOR
l
CHASSIS SPECIFICATIONS
- SHORT CABIN CP14
- FOR SLA8 AND SLA12 ONLY ORIZZONTAL SILENCER
- 2 FLASHING LIGHT ON THE TOP OF THE CABIN
- ECU BWS PREDISPOSITION FOR BODYBUILDER
- ACUSTIC HORNE ON TRUCK REVERSE MOTION - FOR CABIN CP16 OR CR16 TO BE VERIFIED BY CIFA TECH NICAL DEP.
The height of the chassis of the truck must not exceed 1200mm. CIFA SpA call for heights of over.
TRUCKS SPECIFICATION
Page intentionally left empty
Cifa S.p.A. via Stati Uniti d’America, 26 I - 20030 Senago (Milano) tel. +39.02.99013.1 fax +39.02.9981157 www.cifa.com
View more...
Comments