Hydraulic Training System Components and Teachware
Type DS4
RE 00843/02.07 Replaces: 12.05
/164
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
/164
Table of contents Contents System presentation Workstations • Typical variants • Custom configuration • Component carriers • Workstation accessories Component sets
Page 4 6-34 6-8 10-31 32 33-34 35-67
• On/off hydraulics, in accordance with BiBB
36-43
• Proportional technology
44-49
• Hydraulic closed-loop control axes
50-51
• Measuring technology
52-61
• Mobile hydraulics
62-63
• Troubleshooting on hydraulic systems
64-67
Contents
Page
Components
69-126
• Valves
70-89
• Energy converters
90-91
• Hydraulic accessories
92-103
• Electrics 104-114 • Measuring instruments 115-122 • Mobile hydraulics 123-126 Section models
127-131
• Pumps 128 • Valves 129-131 Teachware
133-148
• Exercise manuals 134-135 • Training manuals 136-140 • Software 141-145 • Sets of foils 146-147 • Working material 148
/164
Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Hydraulic training system – system presentation
Features
The hydraulic training system for basic and advanced training was developed to meet the increasing requirements of fluid power technology.
– Training system for basic and advanced training in line with practical needs
The basic training system basically consists of a component carrier with stable, steerable castors with integrated hydraulic power unit, an electrical switch box, a tool container, a measuring glass, and a P/T distributor. The unit can optionally be fitted with up to 2 grid frames for hydraulic components, or with up to 2 grooved panels for pneumatic components, or with one grid frame and one grooved panel each. The exercises are set up on grid frames or grooved panels and then connected by hoses. Quick-action couplings of the hydraulic hoses allow the training exercises to be carried out swiftly and safely. A load simulator and numerous component sets are optionally available and turn the basic training system into a complete, custom system for basic and advanced training in line with practical needs, which guarantees your training success.
– Suitable for holding training courses according to the recommendations by BiBB (Bundesinstitut for Berufsbildung Berlin/Federal Institute for Vocational Training, Berlin) – Rugged and stable design – Low operating noise – Movable thanks to stable, steerable castors – Modular structure for a wide variety of variants – Use of size 6 standard components of Rexroth's industrial valve product range – Clearly arranged and carefully thought-out design – Great selection of component sets • On/off hydraulics • Troubleshooting • Electrical components • Beginner's sets for hydraulics and electrohydraulics • Proportional hydraulics • Mobile hydraulics • Linear axes – Concept across technologies, suitable for • Hydraulics and pneumatics – With detailed and clearly structured trainee's and instructor's training manual, with 21 exercises and solutions
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
/164
Table of contents: Workstations Contents Typical variants • DS4 training system with 1 workstation
Page 6-8 6
• DS4 training system, can be extended to 2 workstations 7 • DS4 training system with 2 workstations
8
Contents • Racks
10-31
• Configuration of the workstation according to own needs 10 • Order example 11
22
– Single-sided (one row, two rows)
22
– Double-sided (one row, two rows)
22
• Power supply – Power supply unit
Custom configuration
Page
– Switch box • Measuring glass – 1 measuring glass
23-26 24 25-26 27 27
• Type code 12-13
• Hose tray
• Base frame 14
• Load simulator
29
• Frame 15
• Table grid, writing surface
30
• Type of hose coupling
31
– Central grooved plate 15
28
– Mounting frame 15 Component carrier
32
– Grid 16
• With one grid
32
– Grooved panel 16
• With two grids
32
• Grid 16
• Base sets
17-20
– Hydraulic power unit with single pump 17 – Hydraulic power unit with double pump 18 – Integrated container 18 – Hoses 19 – Oil drip trays 19 – Mounting kit for power unit
20
– Mounting kit for integrated container
20
• Hydraulics connection block – P/T distributor
21 21
Accessories
33-34
• Wheel-mounted container
33
• Anti-skid mat
33
• Assortment of drawer dividers
33
• Monitor arm
34
• Info panel
34
• Rag holder
34
/164
Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Workstations / typical variants DS4 training system with 1 workstation
11 1 10 2 9 3 8 7
4
6
5
1 Base frame with castors
6 Hydraulic power unit with single pump 230 V/50 Hz, 1.5 kW
2 1x grid frame
7 Switch box 230 V/50 Hz with residual current protective device (RCD)
3 Oil drip tray, writing surface 4 Integrated container 5 Oil drip tray
8 1x P/T distributor with “circulation circuit“ 9 1x power supply unit 24 V (on one side) 10 1x measuring glass 11 1x assembly carrier 210TE, 1x3 HE
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Workstations / typical variants DS4 training system, can be extended to 2 workstations
13 1 12
2 3
11
4 10 9 5
8 7
6
1 Base frame with castors
8 Switch box 230 V/50 Hz
2 1x grid frame
9 1x P/T distributor with “circulation circuit“
3 1x load simulator mounted; swivelling
10 1x hose tray, small
4 1x oil drip tray, writing surface
11 2x power supply unit 24 V (both sides)
5 Integrated container
12 1x measuring glass
6 Oil pan
13 1x assembly carrier 210TE, 1x3 HE
7 Hydraulic power unit with double pump 230 V/50 Hz, 1.5 kW
/164
/164
Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Workstations / typical variants DS4 training system with 2 workstations
13 1 12
2 3
11
4
10 9
5
8 7
1 Base frame with castors 2 2x grid frame 3 Hose tray, large 4 2x oil drip tray, writing surface (both sides) 5 Integrated container 6 Oil pan 7 Hydraulic power unit with double pump 400 V/50 Hz, 2.2 kW
6
8 Switch box 400 V/50 Hz with residual current protective device 9 2x P/T distributor 10 1x load simulator mounted; swivelling 11 2x power supply unit 24 V (both sides) 12 2x measuring glass 13 2x assembly carriers 210TE, 2x3 HE
RE 00843/02.07
Notes
DS4
Hydraulics Bosch Rexroth AG
/164
10/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Workstations / custom configuration Configure the workstation according to your needs
14 7
9 1+ 2 3
9
4 10
8a
12 a 6
12 b
8b
5a 5b
11
5c
= Fields in the type code 1 + 2 Training system – base frame 3 Frame 4 Grid
8 a Energy supply / power supply unit 8 b Energy supply / switch box 9 Measuring glass
5 a Base kit / container
10 Hose tray
5 b Base kit / power unit
11 Load simulator
5 c Base kit / oil pan 6 Hydraulic connection block 7 Rack
12 a Writing surface 12 b Table grid 14 Equipment of electrical assembly
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
11/164
Workstations / custom configuration Order example: Fields: Details in the fields:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
TS–DS4 1X R G2 U07 V1 A0 E02 M1 S0 L… T1 W Equipment of electrical assembly Coupling, leak-free Table grid / writing surface Load simulator Hose tray Measuring glass Energy supply Racks Hydraulic connection block Base kit Grid Frame Series identification Product division / product group
12/164
Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
4
5
Workstations / custom configuration Type code Component carrier for hydraulic training workstation:
Fields:
Details in the fields: Product division - product range Training system base frame DS4 Series Series code Frame Central grooved panel Mounting frame Grid Without grid, without grooved panel Grid on one side Grooved panel on one side Grid on two sides Grooved panel on two sides 1 side grid, 1 side grooved panel
1
2
3
TS–DS4 1X
= TS-DS4 = 1X =N =R = G0 = G1 = N1 = G2 = N2 = GN
Base kit Without base kit Oil pan Hydraulic power unit 230 V/50 Hz, 1.5 kW, 1 pump, oil pan, hose kit 1000, complete Hydraulic power unit 230 V/50 Hz, 1.5 kW, 2 pumps, oil pan, hose kit 630/1000, complete Hydraulic power unit 400 V/50 Hz, 2.2 kW, 1 pump, oil pan, hose kit 1000, complete Hydraulic power unit 400 V/50 Hz, 2.2 kW, 2 pumps, oil pan, hose kit 630/1000, complete Hydraulic power unit 230 V/50 Hz, 1.5 kW, 1 pump, oil pan, container, hose kit 1000, complete Hydraulic power unit 230 V/50 Hz, 1.5 kW, 2 pumps, oil pan, container, hose kit 630/1000, complete Hydraulic power unit 400 V/50 Hz, 2.2 kW, 1 pump, oil pan, container, hose kit 1000, complete Hydraulic power unit 400 V/50 Hz, 2.2 kW, 2 pumps, oil pan, container, hose kit 630/1000, complete 1 oil pan 737 x 725 mm, 1 container 1 oil pan 326 x 725 mm, 2 containers Hydraulic connection block Without connection block 1 P/T distributor with circulation function 2 P/T distributor with circulation function Rack Without assembly carrier Rack 210TE, 1x3HE, on one side Rack 210TE, 2x3HE, on one side Rack 210TE, 1x3HE, on two sides (2x R961000167) Rack 210TE, 2x3HE, on two sides (2x R961000166) Rack 210TE, 1x3HE (R961000167) + 2x3HE (2x R961000166)
6
= U00 = U01 = U02 = U03 = U04 = U05 = U06 = U07 = U08 = U09 = U10 = U11 = V0 = V3 = V4 = A0 = A1 = A2 = A3 = A4 = A5
7
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
13/164
Workstations / custom configuration
8
9
10
11
12
13
14
15
* Further details in clear text Yxx = No code = W= T0 = T1 = T2 = T3 = T4 = T5 =
Equipment of electrical assembly Specification of electrical assemblies in the assembly carriers Type of coupling Techno-Chemie couplings Walther coupling, leak-free Table grid / writing surface Without table grid / without writing surface Table grid for one side Table grid for two sides Writing surfaces for one side Writing surfaces for two sides Table grid for one side / writing surfaces for one side
Load simulator L0 = Without load simulator L3 = 1 load simulator, mounted, swivelling L4 = 2 load simulators, mounted, swivelling Hose tray S0 = Without hose tray S1 = 1 hose tray, can be mounted to the side (cannot be combined with load simulator on one side) S2 = 2 hose trays, can be mounted to the side (cannot be combined with load simulator on one side) S3 = 1 hose tray, large, can be mounted to the side (cannot be combined with load simulator on one side) Measuring glass M0 = Without measuring glass M1 = 1 measuring glass with shut-off valve M2 = 2 measuring glasses with shut-off valve E00 = E01 = E02 = E03 = E04 = E05 = E06 = E07 = E08 = E09 = E10 = E11 = E12 = E13 = E14 =
Power supply – (switch box with 2x emergency stop) Without switch box, without power supply unit Without switch box, with power supply unit 24 VDC, 4.5 A, 115 V/50 Hz (for pneumatics only) Without switch box, with power supply unit 24 VDC, 4.5 A, 230 V/50 Hz (for pneumatics only) With switch box 115 V/50 Hz, with power supply unit 24 VDC, 4.5 A, 115 V/50 Hz With switch box 115 V/50 Hz, with 2 power supply units 24 VDC, 4.5 A, 115 V/50 Hz With switch box 230 V/50 Hz, with power supply unit 24 VDC, 4.5 A, 230 V/50 Hz With switch box 230 V/50 Hz, with 2 power supply units 24 VDC, 4.5 A, 230 V/50 Hz With switch box 400 V/50 Hz, with power supply unit 24 VDC, 4.5 A, 230 V/50 Hz With switch box 400 V/50 Hz, with 2 power supply units 24 VDC, 4.5 A, 230 V/50 Hz With switch box 115 V/50 Hz with RCD, with power supply unit 24 VDC, 4.5 A, 115 V/50 Hz With switch box 115 V/50 Hz with RCD, with 2 power supply units 24 VDC, 4.5 A, 115 V/50 Hz With switch box 230 V/50 Hz with RCD, with power supply unit 24 VDC, 4.5 A, 230 V/50 Hz With switch box 230 V/50 Hz with RCD, with 2 power supply units 24 VDC, 4.5 A, 230 V/50 Hz With switch box 400 V/50 Hz with RCD, with power supply unit 24 VDC, 4.5 A, 230 V/50 Hz With switch box 400 V/50 Hz with RCD, with 2 power supply units 24 VDC, 4.5 A, 230 V/50 Hz
14/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Workstations / custom configuration Base frame Individual parts of the variant in type code “Field 1“ and “Field 2“
Type code designation
R961000160 Base frame
Variant consisting of:
Material no. for the subgroup of the variant
TS-DS4-1X
1x
–
Base frame
TS-DS4-1X
Material no.
R961000160
Basis for all DS4 workstations. 2 oil-tight pans are fitted to the frame. Dimensions Weight
mm W 1350 x D 790 x H 1850 kg 67
Castors
4 pcs; steerable Max. load-carrying capacity 2500 N
Paint coating
Pan; light grey RAL 7035 Side panels, blue RAL 5010
Material
Aluminium profiles Powder-coated sheet steel
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
15/164
Workstations / custom configuration Frame Invididual parts in type code “Field 3“
N
•
R
R961000226 Mounting frame
Type code designation
R961002216 Central grooved panel
Variant consisting of:
R961000216 •
R961000226
Central grooved panel Material no.
R961002216
Can be used on the DS4 instead of mounting frame for pneumatic training. Grids can nevertheless be used. Dimensions Weight Material
mm W 1130 x H 700 x D 30 kg 24.3 Aluminium profile
Mounting frame Material no.
R961000226
For mounting 2 grids or grooved panels or a combination of a grid and a grooved panel. Dimensions Weight Material
Material no. for the subgroup of the variant
mm W 1130 x H 700 x D 30 kg 5.7 Aluminium profile
16/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Workstations / custom configuration Grid Individual parts in type code “Field 4“
•
•
R961000169 Grooved panel
Without grooved panel
G0
R961000210 Grid
Type code designation
Without grid
Variant consisting of:
–
G1
1x
R961000210
N1
1x
G2
2x •
N2 GN
2x •
R961000169
1x
–
1x
R961000210
Reinforced grid for hydraulic components with 50 mm grid pattern Dimensions Weight Material Grid
mm W 1150 x H 700 x D 30 kg 11.75 Steel, aluminium profile mm 50 x 50
Grooved panel Material no.
R961000169
With mounting pins Dimensions Weight Material
R961000169 R961000210
Grid Material no.
Material no. for the subgroup of the variant
mm W 1150 x H 700 x D 30 kg 24 Aluminium profile
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
17/164
Workstations / custom configuration Base kits Individual parts of the variants in type code “Field 5“
U01 • •
U05
•
•
•
•
•
•
•
•
U06
•
U07 U09
• • •
•
Pressure Oil tank
Frequency Power Material no. Dimensions Weight Paint coating Pressure Oil tank
Material no. for subgroup of the variant
•
•
•
•
•
R961000163
2x •
2x •
R961000162
mm W 540 x H 650 x D 440
l 40 VAC 400
Power
R961002475 Hose 1000 mm long
•
R901133999
Voltage Frequency
R961002474 Hose 630 mm long
•
Hz 50
l/min 8 Hz 50 kW 2.2
R961000175
•
kW 1.5
Flow
2x •
•
l 40
Blue RAL 5010
R961000174
•
bar 50
bar 50
2x •
•
Blue RAL 5010
kg 87.5
R961000176
•
kg 75
VAC 230
R961000177
2x •
•
R901134001
l/min 8
2x •
•
mm W 540 x H 650 x D 440
Voltage
R961000178
•
•
Flow
R961000179
2x • •
For the supply of one workstation
Paint coating
2x •
2x •
•
Hydraulic power unit with single pump
Weight
2x •
R961000172
•
U11
Dimensions
R961000156 2x •
•
U10
Material no.
R961000835 Mounting kit for integrated container
• •
U03
U08
R961000288 Integrated container
–
U02 U04
R961000156 Oil pan 1148 x 725 mm
R961000155 Oil pan 737 x 725 mm
R961000154 Oil pan 326 x 725 mm
R961000312 Mounting kit for power unit
R901134002 Double power unit AC 230 V
R901134001 Single power unit AC 230 V
•
R901134000 Power unit with double pump 400 VAC
Without base
U00
R901133999 Power unit with single pump 400 VAC
Type code designation
Variant consisting of:
2x • 2x •
2x •
R961000173
18/164 Bosch Rexroth AG Hydraulics
Workstations / custom configuration Base kits Individual parts of the variants in type code “Field 5“ Hydraulic power unit with double pump For the supply of two workstations Material no. Dimensions Weight Paint coating Pressure Oil tank
R901134002 mm W 540 x H 650 x D 625 kg 95 Blue RAL 5010 bar 50 l 40
Flow
l/min 8
Voltage
VAC 230
Frequency Power Material no. Dimensions Weight Paint coating Pressure Oil tank
Hz 50 kW 1.5 R901134000 mm W 540 x H 650 x D 625 kg 107.5 Blue RAL 5010 bar 50 l 40
Flow
l/min 8
Voltage
VAC 400
Frequency Power
Hz 50 kW 2.2
Integrated container Material no.
R961000288
Lock at the front, easy running tracks, with mounting kit Dimensions Weight Material Drawers Load carrying capacity per drawer Colour
mm W 411 x H 710 x D 725 kg 82 Sheet steel, powder-coated mm 4 x 100 high 1 x 150 high N 500 Light grey RAL 7035
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Workstations / custom configuration Base kits Individual parts of the variants in type code “Field 5“ Hose Material no.
R961002474
NW 08, pressure range 100 bar Didactic designation
VSK1.N-W
Weight
kg 0.64
Length
mm 630
Hose Material no.
R961002475
NW 08, pressure range 100 bar Didactic designation
VSL1.N-W
Weight
kg 0.74
Length
mm 1000
Oil pan Material no.
R961000156
For base DS4, with mounting kit Dimensions Weight Material
mm L 1148 x W 725 x H 30 kg 16.5 Powder-coated sheet steel
Oil pan Material no.
R961000155
For base DS4, with mounting kit Dimensions Weight Material
mm L 737 x W 725 x H 30 kg 11.2 Powder-coated sheet steel
19/164
20/164 Bosch Rexroth AG Hydraulics
Workstations / custom configuration Base kits Individual parts of the variants in type code “Field 5“ Oil pan Material no.
R961000154
For base DS4, with mounting kit Dimensions
mm L 326 x W 725 x H 30
Weight
kg 5.1
Material
Powder-coated sheet steel
Mounting kit for power unit Material no. Dimensions
R961000312 mm W 120 x H 45 x D 100
Weight
kg 0.950
Mounting kit for integrated container Material no. Dimensions
R961000835 mm W 90 x H 130 x D 230
Weight
kg 1.9
Mounting kit for oil pan Material no. Dimensions Weight
R961000761 mm W 120 x H 100 x D 100 kg 0.450
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
21/164
Workstations / custom configuration Hydraulic connection block Individual parts of the variants in type code “Field 6“
V0
•
R961002567 P/T distributor with circulation
Type code designation
Without connection block
Variant consisting of:
Material no. for the subgroup of the variant –
V3
•
R961000435
V4
2x •
R961000435
P/T distributor with circulation function Material no.
R961002567
For DS4, can be mounted to the side panels by means of brackets Dimensions Weight Material
mm W 240 x H 130 x D 140 kg 4.1 Aluminium profile Steel
22/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Workstations / custom configuration Racks Individual parts of the variants in type code “Field 7“
•
A1
•
R961000167 •
2x •
A4 A5
•
2x •
R961000164
•
–
R961000167
210TE; 3HE for DS4 Dimensions Weight Material
mm W 1130 x H 173 x D 200 kg 7.9 Aluminium profile Sheet steel, powder-coated
Rack, two rows Material no.
R961000166
210TE; 3HE for DS4 Dimensions Weight Material
R961000166 R961000165
Rack, one row Material no.
Material no. for the subgroup of the variant –
A2 A3
R961000166 Rack 210TE; 2 x 3HE
A0
R961000167 Rack 210TE; 3HE
Type code designation
Without rack
Variant consisting of:
mm W 1130 x H 306 x D 200 kg 11.6 Aluminium profile Sheet steel, powder-coated
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
23/164
Workstations / custom configuration Power supply Individual parts of the variants in type code “Field 8“
E01
R961000962 Switch box 400 VAC / 50 Hz with RCD
R961000983 Switch box 230 VAC / 50 Hz with RCD
On request Switch box 115 VAC / 50 Hz with RCD
R961000289 Switch box 400 VAC / 50 Hz without RCD
1827008412 Switch box 230 VAC / 50 Hz without RCD
1827008411 Switch box 115 VAC / 50 Hz without RDC
•
R961000170 Power supply unit 230 VAC / 50 Hz
E00
1827003740 Power supply unit 115 VAC / 50 Hz
Type code designation
Without switch box Without power supply unit
Variant consisting of:
Material no. for the subgroup of the variant –
•
E02
1827003740 •
R961000170
E03
•
•
1827008401
E04
2x •
•
1827008402
E05
•
•
1827008403
E06
2x •
•
1827008404
E07
•
•
2x •
•
E08
1827008405 1827008406
E09
•
•
–
E10
2x •
•
–
E11
•
•
–
E12
2x •
•
E13
•
•
–
E14
2x •
•
–
–
24/164 Bosch Rexroth AG Hydraulics
Workstations / custom configuration Power supply Individual parts of the variants in type code “Field 8“ Power supply unit Material no.
1827003740
For DS3 and DS4; regulated output; short-circuit-proof; ON/OFF switch; two 4-mm safety socket pairs +/without connection cable Dimensions Weight
mm W 160 x H 360 x D 45 kg 2.23
Material
Sheet steel
Colour
Blue RAL 5010
Output voltage
VDC 2 x 24
Input voltage
VAC 115
Frequency Current max.
Hz 60 A 4.5
Power supply unit Material no.
R961000170
For DS3 and DS4; regulated output; short-circuit-proof; ON/OFF switch; two 4-mm safety socket pairs +/with connection cable Dimensions Weight
mm W 160 x H 360 x D 45 kg 2.43
Material
Sheet steel
Colour
Blue RAL 5010
Output voltage
VDC 2 x 24
Input voltage
VAC 115
Frequency Current max.
Hz 60 A 4.5
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Workstations / custom configuration Power supply Individual parts of the variants in type code “Field 8“ Switch box Material no.
1827008411
With 2 x emergency stop; 1 keyed socket; 2 socket outlets with earthing contact and fuses – without residual-current-operated circuit breaker Weight
kg 6.5
Output voltage
VAC 3 x 115
Input voltage
VAC 115
Frequency Current max.
Hz 50 A 16
Switch box Material no.
on request
With 2 x emergency stop; 1 keyed socket; 2 socket outlets with earthing contact and fuses – with residual-current-operated circuit breaker Weight
kg 6.5
Output voltage
VAC 3 x 115
Input voltage
VAC 115
Frequency Current max.
Hz 50 A 16
Switch box Material no.
1827008412
With 2 x emergency stop; 1 keyed socket; 2 socket outlets with earthing contact and fuses – without residual-current-operated circuit breaker Weight
kg 6.5
Output voltage
VAC 3 x 230
Input voltage
VAC 230
Frequency Current max.
Hz 50 A 16
Switch box Material no.
R961000963
With 2 x emergency stop; 1 keyed socket; 2 socket outlets with earthing contact and fuses – with residual-current-operated circuit breaker Weight
kg 6.5
Output voltage
VAC 3 x 230
Input voltage
VAC 230
Frequency Current max.
Hz 50 A 16
25/164
26/164 Bosch Rexroth AG Hydraulics
Workstations / custom configuration Power supply Individual parts of the variants in type code “Field 8“ Switch box Material no.
R961000289
With 2 x emergency stop; 1 keyed socket; 2 socket outlets with earthing contact and fuses – without residual-current-operated circuit breaker Weight
kg 6.5
Output voltage
VAC 2 x 230; 1 x 400
Input voltage
VAC 400
Frequency Current max.
Hz 50 A 16
Switch box Material no.
R961000962
With 2 x emergency stop; 1 keyed socket; 2 socket outlets with earthing contact and fuses – with residual-current-operated circuit breaker Weight
kg 6.5
Output voltage
VAC 2 x 230; 1 x 400
Input voltage
VAC 400
Frequency Current max.
Hz 50 A 16
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
27/164
Workstations / custom configuration Measuring glass Individual parts of the variant in type code “Field 9“
M0
•
R961002564 Measuring glass
Type code designation
Without measuring glass
Variant consisting of:
Material no. for the subgroup of the variant –
M1
•
R901000066
M2
2x •
R901000066
Measuring glass Material no.
R961002564
With scale, bleed valve, overflow protection and ball valve Dimensions Weight Capacity Material
mm W 160 x H 700 x D 200 kg 6.5 l 2.5 Acrylic glass Aluminium profile Steel tube PVC hose with nylon lining Length 3 m
28/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Workstations / custom configuration Hose tray Individual parts of the variant in type code “Field 10“
•
R961002634 Hose tray, 50-fold
S0
R961000188 Hose tray, 9-fold
Type code designation
Without hose tray
Variant consisting of:
–
S1
•
S2
R961000188
2x •
S3
R961000188 •
Hose tray Material no.
R961000188
For a maximum of 9 hoses (cannot be combined with load simulator on one side) Dimensions Weight Material
mm W 230 x H 140 x D 240 kg 2.54 Aluminium profile Steel
Hose tray, large Material no.
R961002634
With oil pan for depositing small items. Provided for mounting to the side panel. Sufficient for 50 hoses (cannot be combined with load simulator on one side) Dimensions Weight
Material no. for the subgroup of the variant
mm W 700 x H 172 x D 320 kg 14.5
Material
Aluminium profile Sheet steel, powder-coated
Colour
Blue RAL 5010
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
29/164
Workstations / custom configuration Load simulator Individual parts of the variant in type code “Field 11“
L0
•
R961000187 Load simulator, swivelling
Type code designation
Without load simulator
Variant consisting of:
Material no. for the subgroup of the variant –
L3
•
R961000187
L4
2x •
R961000187
Load simulator, swivelling Material no.
R961000187
With anti-rotation safety mechanism, provided for mounting to the lateral panel. Incl. 2 hose lines with angled connection, 2 m long, and mounting panel for proximity switch Dimensions Weight Material Moved mass Cylinder
mm W 250 x H 1000 x D 250 kg 31.5 Aluminium profile kg 15 Diameter 25 / 16 Stroke 200 mm
30/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Workstations / custom configuration Table grid / writing surface Individual parts of the variant in type code “Field 12“
•
1827003705 Writing surface
T0
R961000192 Table grid
Type code designation
Without table grid Without writing surface
Variant consisting of:
Material no. for the subgroup of the variant –
T1
2x •
T2
4x •
R961000192 R961000192
T3
•
1827003705
T4
2x •
1827003705
•
–
T5
2x •
Table grid Material no.
R961000192
For DS4 oil pans, (4 off are required to equip the system completely) Dimensions Weight
mm W 560 x H 20 x D 790 kg 2.6
Material
Sheet steel
Packaging unit
1
Writing surface Material no.
1827003705
For insertion into the pans of the DS4 component carrier Dimensions Weight
mm W 275 x H 25 x D 360 kg 0.35
Colour
White
Material
PMMA
Packaging unit
2
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
31/164
Workstations / custom configuration Type of hose coupling Identification in type code “Field 13“ Variant consisting of:
-W
Leak-free couplings
Type code designation
Material no. for the subgroup of the variant
•
–
Type of rack equipment Identification in type code “Field 14“
Y02
2x •
Y04
1x •
Y13 Y18
1827008413 BIBB-GS hydraulics A-H, el. components
Type code designation
1827008415 BIBB-GS hydraulics El. components
Variant consisting of:
Material no. for the subgroup of the variant –
1x •
–
2x •
– –
32/164 Bosch Rexroth AG Hydraulics
Workstations / component carriers Component carrier with one grid Material no.
R961003176
For mounting hydraulic components Dimensions Weight
mm W 820 x H 1563 x D 790 kg 35
Material
Aluminium profiles Powder-coated sheet steel
Castors
4 off; steerable Load carrying capacity max: 2500 N
Paint coating
Side panels, blue RAL 5010
Component carriers with two grids Material no.
R961003128
For mounting hydraulic components Dimensions Weight
mm W 820 x H 1563 x D 790 kg 42
Material
Aluminium profiles Powder-coated sheet steel
Castors
4 off; steerable Load carrying capacity max: 2500 N
Paint coating
Side panels, blue RAL 5010
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Workstations / accessories Wheel-mounted container Material no.
R961000287
Lock at the front, easy running tracks Dimensions Weight Material Drawers
mm W 411 x H 825 x D 725 kg 84 Sheet steel, powder-coated mm 4 x 100 high 1 x 150 high
Load carrying capacity per drawer
500 N
Colour
Light grey RAL 7035
Recommended accessories for wheel-mounted container: Anti-skid mat Material no. Dimensions Weight
R961000568 mm W 405 x H 100 x D 720 kg 0.12
Material
Neoprene
Packaging unit
5
Assortment of drawer dividers Material no.
R961000563
100 mm high Dimensions Weight
mm W 405 x H 100 x D 720 kg 0.94
Material
Sheet steel
Packaging unit
4
Assortment of drawer dividers Material no.
R961000564
150 mm high Dimensions Weight
mm W 405 x H 150 x D 720 kg 1.39
Material
Sheet steel
Packaging unit
1
33/164
34/164 Bosch Rexroth AG Hydraulics
Workstations / accessories Articulating monitor arm Material no.
1827003725
With keyboard and mouse holder Dimensions Weight Load carrying capacity
mm W 415 x H 350 x D 710 kg 10 N 250
Material
Aluminium profiles Sheet steel
Colour
Light grey
Info panel Material no.
1827003721
The position can be ajdusted by means of two joints incl. mounting kit Dimensions Weight
mm W 280 x H 370 x D 80 kg 4.11
Format
DIN A4
Material
Aluminium profile Steel
Rag holder Material no.
1827003722
Handy deposit for cleaning rags. Can also be used for cable routing Dimensions
mm W 38 x H 60 x D 35
Weight
kg 0.036
Colour
Black
Material
Plastic
Packaging unit
2
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
35/164
Table of contents: Component sets Contents
Page
Contents
Page
On/off hydraulics according to BiBB
36-43
Measuring technology
52-61
• For manually operated valves
36-37
• Measuring technology 2042, minimal
52-53
• For electrically operated valves
38-39
• Measuring technology 2042, standard
54-55 56-57
• Electrical components for experiments A-H
40
• Measuring technology 3050, minimal for PC
• For additional experiments Z1-Z3
41
• Measuring technology 3050, ISDS standard for PC 58-59
• Electrical components for experiments Z1-Z3
42
• Measuring technology 5050, standard for PC
• Electrical components for experiments A-H and Z1-Z3 43 Proportional technology
44-49
• Analogue control for directional valve
44-45
• Analogue control for flow control valve
46-47
• Analogue control for pressure relief valve
48-49
Hydraulic closed-loop control axes 50-51 • Axis control with Hy-Control
50-51
60-61
Mobile hydraulics
62-63
• Basic principles
62-63
Troubleshooting on hydraulic systems
64-67
• With manually operated directional valves
64-65
• With electrically operated directional valves
66-67
36/164 Bosch Rexroth AG Hydraulics
Component sets / on/off hydraulics – manual, according to BiBB BiBB hydraulic component set A - H, for manually operated valves Material no.
R961002888
This component set is used to impart the basic principles of hydraulics. Training objectives • Drive power unit / pump • Cylinders / hydraulic motors • Directional valves • Pressure control valves • Flow control valves • Hydraulic accumulators • Basic circuits • Commissioning The set includes exclusively industrial components. All valves comply with the industrial standard for size 6. For carrying out the exercises, all the required hoses and 4 pressure gauges for indicating the pressure are included in the scope of supply. Weight
kg 51
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
37/164
Component sets / on/off hydraulics – manual, according to BiBB Set consisting of: Item Qty 1 9 2 5 3 4 4 4 5 1 6 1 7 3 8 2 9 1 10 1 11 1 12 1 13 1 14 1 15 1 16 1 2 17 18 1 19 1 20 1
Material no. R961002474 R961002475 R961002476 R961002715 R961002491 R961002503 R961002485 R961002520 R961002544 R961002545 R961002539 R961002495 R961002546 R961002513 R961002489 R961002522 R961002552 R961002550 R961002551 R961002505
Recommended accessories: R961002893 R961003494 R900061256 R900001439 R900065201
Designation Hose line 630 mm Hose line 1000 mm Hose line 1000 mm with minimess connection Pressure gauge, diameter 63, 0-100 bar incl. MSK Ball valve AB 21-20/G1/4-500 Diaphragm-type hydraulic accumulator with shut-off block for grid Distributor Pressure relief valve DBDH6G1X/100 Direct operated pressure reducing valve DR6DP1- 5X/75YM Pilot operated pressure relief valve DB6K1-4X/50YV Throttle valve DV06-1-1X/V Throttle check valve DRV06-1-1X/V 2-way flow control valve 2FRM6B36-3X/10QRV Check valve, pilot operated SV 6 PB1-6X/ Check valve S6A1.X Check valve S6A3.X 4/2 directional valve 4WMM6C5X 4/3 directional valve 4WMM6G5X 4/3 directional valve 4WMM6E5X/F Gear motor
Page 19, 97 19, 97 99 95 86 92 94 77 77 78 83 83 84 89 87 88 70 70 71 91
BiBB additional experiments Single-rod cylinder, stroke = 200 mm Stopwatch, digital, quartz Filling and testing device Tachometer visual/mechanical
41 90 103 103 103
BiBB Hydraulics - Basic Principles, Trainer‘s Manual BiBB Hydraulics - Basic Principles, Trainee‘s Manual BiBB Hydraulics - Basic Principles, Project Exercises, Trainer‘s Manual BiBB Hydraulics - Basic Principles , Project Exercises, Trainee‘s Manual
134 134 134 134
The Hydraulic Trainer, Volume 1, Basic Principles The Hydraulic Trainer, Volume 5, Fluid Power Technology A-Z Hydraulics in theory and practice
136 138 139
Hydraulic Trainer CBT Version 4.0 Web Tr@iner Hydraulics - Basic Principles
141 142
Teachware: Training manuals * * * * Supplementary literature * * * Supplementary training media * *
* The teachware in various languages can be found on the given pages
38/164 Bosch Rexroth AG Hydraulics
Component sets / on/off hydraulics – electrical, according to BiBB BiBB hydraulic component set A - H, for electrically operated valves Material no.
R961002887
This component set is used for imparting basic knowledge in the field of electrohydraulics Training objectives • Drive power unit / pump • Cylinders / hydraulic motors • Electrically controlled directional valves • Pressure control valves / pressure switches • Flow control valves • Hydraulic accumulators • Basic circuits / relay circuits • Commissioning and troubleshooting The set includes exclusively industrial components. All valves comply with the industrial standard for size 6. For carrying out the exercises, all the required hoses and 4 pressure gauges for indicating the pressure are included in the scope of supply. Weight
kg 57
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
39/164
Component sets / on/off hydraulics – electrical, according to BiBB Set consisting of: Item Qty 1 9 2 5 3 4 4 4 5 1 6 1 7 3 8 2 9 1 10 1 11 1 1 12 13 1 14 1 15 1 16 1 17 1 2 18 19 1 20 1 21 1 22 1 23 2
Material no. R961002474 R961002475 R961002476 R961002715 R961002491 R961002503 R961002485 R961002520 R961002544 R961002545 R961003488 R961002495 R961002539 R961002546 R961002513 R961002489 R961002522 R961002547 R961002548 R961002549 R961002505 R900846807 R900846808
Recommended accessories: 1 R961002893 1 1827008414 1 1827008420 1 R961003494 1 R900061256 1 R900001439 1 R900065201
Designation Hose line 630 mm Hose line 1000 mm Hose line 1000 mm with minimess connection Pressure gauge, diameter 63, 0 - 100 bar incl. MSK Ball valve AB 21-20/G1/4-500 Diaphragm-type hydraulic accumulator with shut-off block for grid Distributor Pressure relief valve DBDH6G1X/100 Direct operated pressure reducing valve DR6DP1- 5X/75YM Pilot operated pressure relief valve DB6K1-4X/50YV Pressure switch Throttle check valve DRV06-1-1X/V Throttle valve DV06-1-1X/V 2-way flow control valve 2FRM6B36-3X/10QRV Check valve, pilot operated SV 6 PB1-6X/ Check valve S6A1.X Check valve S6A3.X 4/2 directional valve 4WE6C6X/EG24N9K4 4/3 directional valve 4WE6G6X/EG24N9K4 4/3 directional valve 4WE6E6X/EG24N9K4 Gear motor Cable set HPF-E1 Cable set HPF-E2
Page 19, 97 19, 97 99 95 86 92 94 77 77 78 80 83 83 84 89 87 88 73 73 74 91 111 111
BiBB additional experiments Electrical components BiBB Z1 -Z3 19“ Electrical components BiBB Z1 -Z3 boxes Single-rod cylinder, stroke = 200 mm Stopwatch, digital, quartz Filling and testing device Tachometer visual/mechanical
41 42 90 103 103 103
BiBB Hydraulics - Basic Principles, Trainer‘s Manual BiBB Hydraulics - Basic Principles, Trainee‘s Manual BiBB Hydraulics - Basic Principles, Project Exercises, Trainer‘s Manual BiBB Hydraulics - Basic Principles, Project Exercises, Trainee‘s Manual
134 134 134 134
The Hydraulic Trainer, Volume 1, Basic Principles The Hydraulic Trainer, Volume 5, Fluid Power Technology A - Z Hydraulics in theory and practice
136 138 139
Hydraulic Trainer CBT Version 4.0 Web Tr@iner Hydraulics - Basic Principles Web Tr@iner Electrohydraulics
141 142 143
Teachware: Training manuals * * * * Supplementary literature * * * Supplementary training media * * *
* The teachware in various languages can be found on the given pages
40/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Component sets / on/off hydraulics – electrical, according to BiBB Electrical components for BiBB hydraulic component set A-H Material no.
1827008413
Electrical components for controlling electrically operated valves A - H to BiBB as 19" version for installation in racks Weight
kg 5.23
1
4
Set consisting of: Item Qty 1 1 2 1 3 1 4 5 5 2 6 1
3
6
Material no. R900719908 R900897345 R900897337 1827008408 R961003106 R900029597
Designation Operating module, 4 push-buttons / 2 switches BPS 7.4 Operating module, distributor BPS 13.1 Operating module, relay BRS 1.2 Blind plate 3HE/21TE Proximity switch, inductive Measurement cable set (small)
2
5
Page 104 104 104 109 114 112
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
41/164
Component sets / on/off hydraulics – electrical, according to BiBB BiBB hydraulic component set for additional experiments Z1 - Z3 Material no.
R961002893
Hydraulic components for 3 further experiments in accordance with BiBB, based on the BiBB component set R961002887 This kit includes industrial components of size 6 and all the required connection cables. Weight
kg 16
Set consisting of: Item Qty Material no. Designation 1 1 R961002489 Check valve S6A1.X 2 1 R961002522 Check valve S6A3.X 3 1 R961003488 Pressure switch incl. cable 4 1 R961002553 Pilot operated pressure relief valve 5 1 R961002485 Distributor 6 1 R961002554 4/3 directional valve 4WE6J6X/EG24N9K4 7 1 R900846807 Solenoid cable with LED, form A, black plug 8 2 R900846808 Solenoid cable with LED, form A, grey plug Recommended accessories: 1827008414 BiBB electrical components Z1 - Z3 19“ 1827008420 BiBB electrical components Z1 -Z3 boxes Supplementary literature * The Hydraulic Trainer, Volume 1, Basic Principles * The Hydraulic Trainer, Volume 5, Fluid Power Technology A - Z * Hydraulics in theory and practice Supplementary training media * Hydraulic Trainer CBT Version 4.0 * Web Tr@iner Electrohydraulics * The teachware in various languages can be found on the given pages
Page 87 88 80 81 94 74 111 111 42
136 138 139 141 143
42/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Component sets / on/off hydraulics – electrical, according to BiBB Electrical components for BiBB hydraulic component set for additional experiments Z1 - Z3 Material no.
1827008414
Electrical components for controlling electrically operated valves Z1 - Z3 according to BiBB in 19“ variant, for installation into racks Weight
kg 2.6
1
2
3
4
Set consisting of: Item Qty 1 1 2 1 3 1 4 1
Material no. R900897341 R900897337 R900897346 R961003106
Designation Operating module, signal output BPS 8.1 Operating module, relay BRS 1.2 Operating module, time relay BRS 2.1 Proximity switch, inductive
Page 104 104 105 114
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
43/164
Component sets / for on/off hydraulics – electrical, according to BiBB Electrical components for BiBB hydraulic component set Material no.
1827008415
Electrical components for controlling electrohydraulics (extended set A - H and Z1 - Z3) in 19“ variant; complete 210 TE Weight
kg 8.25
1
3
5
6
4
2 7
Set consisting of: Item Qty 1 1 2 1 3 2 4 1 5 1 6 1 7 3 8 1
Material no. R900897345 R900719908 R900897337 R900897341 1827008408 R900897346 R961003106 R900021502
Designation Operating module, dstributor BPS 13.1 Operating module, 4 push-buttons / 2 switches BPS 7.4 Operating module, relay BRS 1.2 Operating module, signal output BPS 8.1 Partial front panel 3HE/21TE Operating module, time relay BRS 2.1 Proximity switch, inductive Measurement cable set (large)
8
Page 104 104 104 104 109 105 114 112
44/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Component sets / proportional technology Component set, 4/3 proportional directional valve 4WREE6, load simulation valve, command value module Material no.
R961003549
For analogue controlling of the proportional directional valve, based on BiBB component set R961002887 Training objectives • Proportional valve technology • Component technology (valve / amplifier) • Proportionality • Cylinder control • Positioning
2 5
1 3
1
4
6 7
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
45/164
Component sets / proportional technology Set consisting of: Item Qty Material no. 1 1 R961003533 2 3 4 5 6 7
1 1 1 1 1 1
R961000107 R961001630 R900711665 R961001957 R961003550 R900826555
Recommended accessories: 1 R961003495
Designation Page 4/3 proportional directional valve 4WREE with integrated electronics and load simulation 75 valve Operating module BPS 20.0 for command value generation 106 Operating module BPS 21.0, adapter from 4 mm sockets to 7-pin connection plug 106 Operating module BPS 6.1 105 Operating module BPS 5.2 with 1 potentiometer +/- 10 Volt output 105 7-pin cable for the connection of integrated electronics 113 Cable set (command value measurement) 111
Single-rod cylinder, 400 mm stroke
90
Teachware: Training manuals * * Supplementary literature * * Supplementary training media * *
Control Technology with Proportional Hydraulics, Trainer‘s Manual Control Technology with Proportional Hydraulics, Trainee‘s Manual
134 134
The Hydraulic Trainer, Volume 2, Proportional and Servo-valve Technology The Hydraulic Trainer, Volume 5, Fluid Power Technology A - Z
137 138
Web Tr@iner Proportional and Closed-loop Control Technology OHP foils Proportional Hydraulics
144 147
* The teachware in various languages can be found on the given pages
46/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Component sets / proportional technology Component set proportional technology Material no.
R961002897
For analogue controlling of proportional flow control valve type 2FRE6B-2X/10QK4RV, based on BiBB component set R961002887 Training objectives • Proportional valve technology • Component technology (valve / amplifier) • Proportionality • Cylinder control • Positioning Weight Type of protection
5
kg 7.0 IP41
6
1
3
4
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
47/164
Component sets / proportional technology Set consisting of: Item Qty 1 1 3 1 4 1 5 1 6 1
Material no. R961002557 R900844180 R900846809 R900711658 R901057058
Recommended accessories: 1 R900711665 1 R961003495 1 R900843486
Designation Proportional flow control valve 2FRE6B-2X/10QK4RV Position transducer cable for proportional flow control valve (analogue control) Solenoid cable without LED, form A, grey plug Operating module BPS 2.1 Proportional amplifier VT-VRPA1
Page 85 112 111 107 108
Operating module, command and actual value display BPS 6.1 in 19“ Single-rod cylinder, stroke = 400 mm Precision pressure gauge 0 - 100 bar
105 90 95
Proportional Hydraulics, Trainer‘s Manual Proportional Hydraulics, Trainee‘s Manual
134 134
The Hydraulic Trainer, Volume 2, Proportional and Servo-valve Technology The Hydraulic Trainer, Volume 5, Fluid Power Technology A - Z
137 138
Web Tr@iner Proportional and Closed-loop Control Technology OHP foils Proportional Hydraulics
144 147
Teachware: Training manuals * * Supplementary literature * * Supplementary training media * *
* The teachware in various languages can be found on the given pages
48/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Component sets / proportional technology Component set proportional technology Material no.
R961002898
For the analogue control of proportional pressure relief valve DBE6-1X/50G24NK4M, based on BiBB component set R961002887 Training objectives • Proportional valve technology • Component technology (valve / amplifier) • Proportionality Weight Type of protection
3
kg 7.5 IP41
4
2
1
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
49/164
Component sets / proportional technology Set consisting of: Item Qty 1 1 2 1 3 1 4 1
Material no. R961002555 R900846809 R900711662 R900033823
Recommended accessories: 1 R900711665 1 R961003495 1 R900843486
Designation Proportional pressure relief valve DBE6-1X/50G24NK4M Solenoid cable without LED, form A, grey plug Operating module BPS 3.1 Proportional amplifier VT-VSPA1
Page 81 111 107 108
Operating module, command and actual value display, BPS 6.1 in 19“ Single-rod cylinder, stroke = 400 mm Precision pressure gauge 0 - 100 bar
105 90 95
Proportional Hydraulics, Trainer‘s Manual Proportional Hydraulics, Trainee‘s Manual
134 134
The Hydraulic Trainer, Volume 2, Proportional and Servo-valve Technology The Hydraulic Trainer, Volume 5, Fluid Power Technology A - Z
137 138
Web Tr@iner Proportional and Closed-loop Control Technology OHP foils Proportional Hydraulics
144 147
Teachware: Training manuals * * Supplementary literature * * Supplementary training media * *
* The teachware in various languages can be found on the given pages
50/164 Bosch Rexroth AG Hydraulics
Component sets / hydraulic closed-loop control axes Component set linear axis – HY-Control – with analogue amplifier Material no.
R961002886
Component set HY-Control is a complete training system, including two-language training manual on CD-ROM. A load can be steplessly simulated by means of a pressure relief valve on the passive cylinder. Training objectives • High-response valve technology • Component technology (valve / amplifier) • Closed-loop position control • Command value ramps • Zero point matching • Dynamic response • Commissioning Weight Type of protection
kg 83 IP41
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
51/164
Component sets / hydraulic closed-loop control axes Set consisting of: Item Qty 1 1 2 1 3 1 4 1 5 1 6 1 7 3 8 1 9 4 3 10 11 1 1 12
Material no. R900784518 1827003492 1827008069 R961002509 1827003336 R961002516 R961002715 R961002486 R961002476 R961002475 R961002519 R961002796
Teachware: Supplementary literature * * Supplementary training media * *
Designation Linear axis, analogue position measuring system Controller module AVPC, box, SI Operating module BPS 6.1/B with electro-box 49TE High-response valve size 6 OBE Valve cable with Hirschmann plug CA 6 LS and valve plug-in connector Re-feed tank for HY-Control Pressure gauge, diameter 63, 0 - 100 bar incl. MSK Pressure relief valve DBDH6G1X/100 for HY-Control Hose line 1000 mm with minimess connection Hose line 1000 mm Distributor for HY-Control CD HY-Control training manual de/en
Page
76
95 99 19, 97 89
The Hydraulic Trainer, Volume 2, Proportional and Servo-valve Technology The Hydraulic Trainer, Volume 5, Fluid Power Technology A - Z
137 138
Web Tr@iner Proportional and Closed-loop Control Technology OHP foils Proportional Hydraulics
144 147
* The teachware in various languages can be found on the given pages
52/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Component sets / measuring technology Component set measuring technology 2042, minimal Material no.
R961002156
The inexpensive entry into the electrical measurement of physical variables such as pressure and speed. All the required connection cables and the transport case are included. Set up BiBB exercises (pump characteristic curves, regenerative circuit, etc.) and utilize an industrial measuring instrument instead of mechanical pressure gauges. The data acquired via the connection cable can also be read out on a PC. For this, you optionally require: Software Connection cable Weight
Material no. R961001939
Material no. R961001947 kg 4.6
6 1
3 4
5
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
53/164
Component sets / measuring technology Set consisting of: Item Qty 1 1 2 1 3 1 4 1 5 1 6 1
Material no. R900754481 R900868620 R961001938 R900210004 R900210002 R900063746
Designation Speed sensor (output 4 - 20 mA) Pressure transducer 0 - 200 bar / output 0 - 20 mA Multihandy 2042 Plastic case Plug-in power supply unit, 230 VAC Measurement cable
Page 118 118 115 122 122 121
In order to measure/display differential pressure in parallel, you require additionally R900868620 Pressure transducer 0 - 200 bar / output 0 - 20 mA R900063746 Measurement cable
118 121
Teachware: Supplementary literature * *
136 138
The Hydraulic Trainer, Volume 1, Basic Principles The Hydraulic Trainer, Volume 5, Fluid Power Technology A - Z
* The teachware in various languages can be found on the given pages
54/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Component sets / measuring technology Component set Measuring technology 2042, standard Material no.
R961003445
Measure all relevant physical variables such as pressure, flow, temperature and speed in your hydraulic exercise set-up. All the required connection cables and the transport case are included. Carry out BiBB exercises (pump characteristic curve, regenerative circuit etc.) and utilize an industrial measuring instrument instead of mechanical pressure gauges. The data acquired via the connection cable can also be read out on a PC. For this, you optionally require: Software
Material no. R961001939
Connection cable
Material no. R961001947
Weight
kg 4.6
2
9
3
4
8
1 5 7
6
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
55/164
Component sets / measuring technology Set consisting of: Item Qty 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 2 9 1
Material no. R961002536 R900704454 R900868620 R900754481 R961001938 R900210004 R900210002 R900063746 R900213937
Designation Gear flow sensor 0.2 - 30 l/min F/I converter Pressure transducer 0 - 200 bar / output 0 - 20 mA Speed sensor (output 4 - 20 mA) Multihandy 2042 Plastic case Plug-in power supply unit, 230 VAC Measurement cable Temperature sensor
Page 119 120 118 118 115 122 122 121 119
In order to measure/display differential pressure in parallel, you require additionally R900868620 Pressure transducer 0 - 200 bar / output 0 - 20 mA
118
Teachware: Supplementary literature * *
136 138
The Hydraulic Trainer, Volume 1, Basic Principles The Hydraulic Trainer, Volume 5, Fluid Power Technology A - Z
* The teachware in various languages can be found on the given pages
56/164 Bosch Rexroth AG Hydraulics
DS4
Component sets / measuring technology Component set measuring technology 3050, minimal for PC Material no.
R900738894
Measure physical variables such as pressure and speed using the industrial measuring device Multihandy 3050. Carry out BiBB exercises (pump characteristic curve, regenerative circuit etc.) and utilize sensors with frequency and analogue signals. Thanks to ISDS (Intelligent Sensor Detection System), no calibration required. All the required connection cables, transport case, evaluation software HYDROcomsys / Win32 and the USB connection cable are included. Weight
kg 8.4
2
1
6
3
5
7
4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
57/164
Component sets / measuring technology Set consisting of: Item Qty 1 1 2 1 3 1 4 1 5 1 6 1 7 1
Material no. R900892375 R900738915 R900739196 R900733194 R900210002 R900733207 R900778981
Designation Speed sensor Pressure transducer 0 - 200 bar / output 0 - 20 mA with ISDS Multihandy 3050 incl. software HydroCOMsys/WIN Test case Plug-in power supply unit, 230VAC Measurement cable (ISDS) USB cable for Multihandy 3050/5050 L = 1.5 m
Page 118 118 115 122 122 121 121
In order to measure/display differential pressure in parallel, you require additionally Pressure transducer 0 - 200 bar / output 0 - 20 mA with ISDS R900738915 R900733207 Measurement cable (ISDS)
118 121
Teachware: Supplementary literature * *
136 138
The Hydraulic Trainer, Volume 1, Basic Principles The Hydraulic Trainer, Volume 5, Fluid Power Technology A - Z
* The teachware in various languages can be found on the given pages
58/164 Bosch Rexroth AG Hydraulics
Component sets / measuring technology Component set Measuring technology 3050 ISDS, standard for PC Material no.
R961002884
Measure all relevant variables such as pressure, flow, temperature and speed in your hydraulic exercise set-up using the industrial measuring device Multihandy 3050. Carry out BiBB exercises (pump characteristic curve, regenerative circuit etc.) and utilize sensors with frequency and analogue signals. Thanks to ISDS (Intelligent Sensor Detection System), no calibration required. All the required connection cables, transport case, evaluation software HYDROcomsys / Win32 and the USB connecting cable are included. Weight
kg 11.1
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
59/164
Component sets / measuring technology Set consisting of: Item Qty 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 3 9 1
Material no. R961002508 R900892375 R900738915 R900739196 R900733194 R900210002 R900749653 R900733207 R900778981
Designation Gear flow sensor 0.2 - 30 l/min with ISDS Speed sensor Pressure transducer 0 - 200 bar / output 0 - 20 mA with ISDS Multihandy 3050 incl. software HydroCOMsys/WIN Test case Plug-in power supply unit, 230 VAC Temperature sensor with ISDS Measurement cable (ISDS) USB cable for Multihandy 3050/5050 L = 1.5 m
Page 119 118 118 115 122 122 119 121 121
In order to measure/display differential pressure in parallel, you require additionally R900738915 Teachware: Supplementary literature * *
Pressure transducer 0 - 200 bar / output 0 - 20 mA with ISDS
118
The Hydraulic Trainer, Volume 1, Basic Principles The Hydraulic Trainer, Volume 5, Fluid Power Technology A - Z
136 138
* The teachware in various languages can be found on the given pages
60/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Component sets / measuring technology Component set measuring technology 5050, standard for PC Material no.
R961002885
The high-end measuring device for the most demanding use in complex circuits. Utilize up to six measurement inputs for your complete hydraulic exercise set-up. Carry out BiBB exercises (pump characteristic curve, regenerative circuit etc.) and utilize sensors with frequency and analogue signals. Thanks to ISDS (Intelligent Sensor Detection System), no calibration required. All the required connection cables, transport case, evaluation software HYDROcomsys / Win32 and the USB connecting cable are included. Weight
kg 11.5
3
4
2
8
1
6
5
9
7
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
61/164
Component sets / measuring technology Set consisting of: Item Qty 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 3 9 1
Material no. R961002508 R900892375 R900738915 R900749653 R900733191 R900210002 R900733194 R900733207 R900778981
Designation Gear flow sensor 0.2 - 30 l/min with ISDS Speed sensor Pressure transducer 0 - 200 bar / output 0 - 20 mA with ISDS Temperature sensor with ISDS Multihandy 5050 incl. software HydroCOMsys/WIN Plug-in power supply unit, 230 VAC Test case Measurement cable (ISDS) USB cable for Multihandy 3050/5050 L = 1.5 m
Page 119 118 118 119 116 122 122 121 121
In order to measure/display differential pressure in parallel, you require additionally Pressure transducer 0 - 200 bar / output 0 - 20 mA with ISDS R900738915
118
Teachware: Supplementary literature * *
136 138
The Hydraulic Trainer, Volume 1, Basic principles The Hydraulic Trainer, Volume 5, Fluid Power Technology A - Z
* The teachware in various languages can be found on the given pages
62/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Component sets / mobile hydraulics Component set mobile hydraulics, basic principles Material no.
R961002890
With manually operated mobile control blocks. The component set includes standard mobile control blocks and is a unique training system on the market. It was designed for, among others, the following professions: • Construction machine mechanics • Construction machine operators • Agricultural machine mechanics. It is used for illustrating the differences between industrial hydraulics and mobile hydraulics. The types of actuation are • mechanical • electrical • electrohydraulic, proportional or switched The actuating travel can be read off from scales. This allows recording of a flow characteristic curve in dependence upon the load. Weight
1
kg 36.5
2
3 4
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
63/164
Component sets / mobile hydraulics Set consisting of: Item Qty 1 1 2 1 3 1 4 1
Material no. R961002532 R961002533 R961002531 R961002541
Designation Mobile control block SM12 (1 hand lever valve) Mobile control block SM12 (2 hand lever valves) Mobile control block SM12 (1 x hand lever / 1 x hydraulic) Pilot control device
Page 123 124 125 126
Teachware: Training manuals * * Supplementary literature * *
Mobile Hydraulics, Trainer‘s Manual Mobile Hydraulics, Trainee‘s Manual
134 134
Hydrostatic drives with control of the secondary unit Hydraulics in mobile machinery
138 140
* The teachware in various languages can be found on the given pages
64/164 Bosch Rexroth AG Hydraulics
Component sets / troubleshooting on hydraulic systems Hydraulic component set, troubleshotting Material no.
R961002891
With manually operated directional valve. This component set is based on the contents of BiBB exercises and deals in detail with the subject area of commissioning and troubleshooting. It comprises valves with integrated defects that are to be installed in circuits. "Troubleshooting" provides assistance in imparting knowledge of and competence in systematic troubleshooting on hydraulic systems in a target-oriented manner. Trainee's and Instructor's Manual included. Weight
kg 10
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
65/164
Component sets / troubleshooting on hydraulic systems Set consisting of: Item Qty 1 1 2 1 3 1 4 1 5 1 6 1
Material no. R900054511 R961002520** R961002545** R961002471** R961002550**
Teachware: Supplementary literature * * * Supplementary training media * *
Designation Troubleshooting HP3/4/6 Trainer‘s and Trainee‘s Manual - de Pressure relief valve DBDH6G1X/100 Pilot operated pressure relief valve DB6K1-4X/50YV Check valve S6A1.X with hose 630 mm 4/3 directional valve 4WMM6G5X Storage box
Page 135 77 79 87 70
The Hydraulic Trainer, Volume 1, Basic principles The Hydraulic Trainer, Volume 5, Fluid Power Technology A - Z Hydraulics in theory and practice
136 138 139
Hydraulic Trainer CBT Version 4.0 Web Tr@iner Hydraulics - basic principles
141 142
* The teachware in various languages can be found on the given pages ** Components are manipulated and identified by a “B“ on the nameplate
66/164 Bosch Rexroth AG Hydraulics
Component sets / troubleshooting on hydraulic systems Hydraulic component set, troubleshooting Material no.
R961002892
With electrically operated directional valve. This component set is based on the contents of BiBB exercises and deals in detail with the subject area of commissioning and troubleshooting. It comprises valves with integrated defects that are to be installed in circuits. "Troubleshooting" provides assistance in imparting knowledge of and competence in systematic troubleshooting on hydraulic systems in a target-oriented manner. Trainee's and Instructor's Manual included. Weight
kg 12
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
67/164
Component sets / troubleshooting on hydraulic systems Set consisting of: Item Qty 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1
Material no. R961002520** R961002545** R961002471** R961002548** R900054511 R900846807 R900846808
Teachware: Supplementary literature * * * Supplementary training media * *
Designation Pressure relief valve DBDH6G1X/100 Pilot operated pressure relief valve DB6K1-4X/50YV Check valve S6A1.X with hose 630 mm 4/3 directional valve 4WE6G6X/EG24N9K4 Troubleshooting-HP3/4/6 Trainer‘s and Trainee‘s Manual - de Solenoid cable with LED, form A, black plug Solenoid cable with LED, form A, grey plug Storage box
Page 77 79 87 73 135 111 111
The Hydraulic Trainer, Volume 1, Basic principles The Hydraulic Trainer, Volume 5, Fluid Power Technology A - Z Hydraulics in theory and practice
136 138 139
Hydraulic Trainer CBT Version 4.0 Web Tr@iner Hydraulics - basic principles
141 142
* The teachware in various languages can be found on the given pages ** Components are manipulated and identified by a “B“ on the nameplate
68/164 Bosch Rexroth AG Hydraulics
Notes
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
69/164
Table of contents: Components Contents
Page
Contents
Page
Valves
70-89
Hydraulic accessories
92-103
• Directional valves
70-76
• Hydraulic accumulators
92
– Manual operation
70-72
• Pressure filters
93
– Electrical operation
73-74
• Distributors
– Proportional and high-response valves with feedback 75-76
94
• Pressure gauges
95-96 97-99
77-82
• Hoses
– Manual operation
77-79
• Tools 100-102
– Electrical operation
80-82
• Required working material according to BiBB 103
• Pressure control valves
• Flow control valves
83-85
– Manual operation
83-84
– Electrical operation • Isolator valves – Manual operation – Hydraulic operation Energy converters
Electrics
104-114
85
• Operating modules of 19“ installation technique 104-109
86-89
• Desktop power supply unit 110
86
• Connection cables 111-113
87-89
• Proximity switches 114
90-91
Measuring technology
115-122
• Cylinders
90
• Measuring instruments 115-117
• Hydraulic motors
91
• Sensors 118-120 • Measurement cable 121 • Accessories 122 Mobile hydraulics
123-126
• Control block, 1 directional valve, hand lever 123 • Control block, 2 directional valves, 2 hand levers 124 • Control block, 2 directional valves, 1 hand lever 125 • Pilot control device
126
70/164 Bosch Rexroth AG Hydraulics
Components / valves Directional valves Manual operation 4/2 directional valve Material no.
R961002552
With spring return, mounted on component plate Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Flow max. l/min Type of actuation Symbol
4/3 directional valve Material no.
DW3.NV-W 4WMM6C5X RE 22280 W 140 x D 125 x H 187 2.3 70 6 15 Hand lever
R961002550
With spring return, mounted on component plate Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure bar max. Flow max. l/min Type of actuation Symbol
DW4.NV-W 4WMM6G5X RE 22280 W 140 x D 125 x H 187 2.3 70 6 100 15 Hand lever
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Components / valves Directional valves Manual operation 4/3 directional valve Material no.
R961002551
With detent, mounted on component plate Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure bar max. Flow max. l/min Type of actuation Symbol
4/3 directional valve Material no.
DW5.NV-W 4WMM6E5X/F RE 22280 W 140 x D 125 x H 187 2.3 70 6 100 15 Hand lever
R961002510
With spring return, mounted on component plate Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure bar max. Flow max. l/min Type of actuation Symbol
DW14.NV-W 4WMM6J5X RE 22280 W 140 x D 125 x H 187 2.3 70 6 100 15 Hand lever
71/164
72/164 Bosch Rexroth AG Hydraulics
Components / valves Directional valves Manual operation 4/3 directional valve Material no. Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure bar max. Flow max. l/min Type of actuation Symbol
R961002511 DW18.NV-W 4WMM6H5X RE 22280 W 140 x D 125 x H 187 2.3 70 6 100 15 Hand lever
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Components / valves Directional valves Electrical operation 4/2 directional valve Material no.
R961002547
With spring return, with concealed manual override, mounted on component plate Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Flow max. l/min Voltage VDC Power consumption W Switching ON ms time OFF ms Type of actuation Symbol
4/3 directional valve Material no.
DW3E.NV-W 4WE6C6X/EG24N9K4 RE 23178 W 145 x D 125 x H 132 2.65 50 6 100 15 24 30 25 - 45 10 - 25 Electrical
R961002548
With spring return, with concealed manual override, mounted on component plate Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Flow max. l/min Voltage VDC Power consumption W Switching ON ms time OFF ms Type of actuation Symbol
DW4E.NV-W 4WE6G6X/EG24N9K4 RE 23178 W 145 x D 125 x H 132 5.15 50 6 100 15 24 30 25 - 45 10 - 25 Electrical
73/164
74/164 Bosch Rexroth AG Hydraulics
Components / valves Directional valves Electrical operation 4/3 directional valve Material no.
R961002554
With spring return, with concealed manual override, mounted on component plate Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Flow max. l/min Voltage VDC Power consumption W Switching ON ms time OFF ms Type of actuation Symbol
4/3 directional valve Material no.
DW10E.NV-W 4WE6J6X/EG24N9K4 RE 23178 W 145 x D 125 x H 132 2.65 50 6 100 15 24 30 25 - 45 10 - 25 Electrical
R961002549
With spring return, with concealed manual override, mounted on component plate Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Flow max. l/min Voltage VDC Power consumption W Switching ON ms time OFF ms Type of actuation Symbol
DW13E.NV-W 4WE6E6X/EG24N9K4 RE 23178 W 145 x D 125 x H 132 2.65 50 6 100 15 24 30 25 - 45 10 - 25 Electrical
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Components / valves Directional valves Proportional and high-response valves with feedback 4/3 proportional directional valve Material no. R961003533 4/3 proportional directional valve with load simulation valve Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure bar max. Nominal flow l/min Command value VDC input Component plug Type of actuation Symbol
DW40-E-D.NV-W 4WREE6E08-2X/G24K31/A1V + HSZ 06 AZ18 RE 29061 W xDxH 5.9 50 6 100 8 at Dp = 10 bar ±10 V K31 Electrical
75/164
76/164 Bosch Rexroth AG Hydraulics
Components / valves Directional valves Proportional and high-response valves with feedback 4/3 proportional directional valve Material no. R961002515 With integrated control electronics, spring return, mounted on component plate Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Nominal flow l/min Command value VDC input Component plug Type of actuation Symbol
DW40E.NV-W 4WREE6E08-2X/G24K31/A1V RE 29061 W 262 x D 125 x H 184 4.4 70 6 100 8 at Δp = 10 bar ±10 According to DIN 43563-AM6-3 Electrical
4/4 high-response valve, direct operated Material no. R961002509 With 4/4 failsafe positions in the deactivated state, control solenoid with integrated position feedback and integrated valve electronics (OBE), mounted on component plate Didactic designation Industrial type
DW38E.NV-W 4WRPEH6C3B04L-2X/G24K0/ A1M RE 29035 W 199 x D 125 x H 157 5.1 50 6 100 4 at Δp = 70 bar 24
Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Nominal flow l/min Supply voltage of con- VDC trol electronics Command value input VDC ±10 Component plug According to E DIN 43563-AM6 Type of actuation Electrical Symbol
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Components / valves Pressure control valves Manual operation Pressure relief valve, direct operated Material no. R961002520 Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressubar re max. Set pressure bar Flow max. l/min Type of actuation Symbol
DD1.1N-W DBDH6G1X/100 RE 25402 W 205 x D 100 x H 40 2.1 70 6 100 Up to 100 Approx. 15 Manual
Pressure reducing valve, direct operated Material no. R961002544 Adjustment by means of hand wheel, internal pilot oil supply, external leakage oil drain, without check valve, mounted on component plate Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Secondary pressure max. bar Flow max. l/min Type of actuation Symbol
DD2.NV-W DR6DP1-5X/75YM RE 26564 W 205 x D 125 x H 90 2.7 70 6 100 75 15 Manual
77/164
78/164 Bosch Rexroth AG Hydraulics
Components / valves Pressure control valves Manual operation Pressure sequencing valve, direct operated Material no. R961002558 Adjustment by means of hand wheel, internal pilot oil supply, external leakage oil drain, with check valve, mounted on component plate Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Sequencing pressure max. bar Flow max. l/min Type of actuation Symbol
DD3.NV-W DZ6DP1-5X/75Y RE 26076 W 205 x D 125 x H 95 2.73 70 6 100 75 15 Manual
Pressure relief valve, pilot operated Material no. R961002545 Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Set pressure max. bar Flow max. l/min Type of actuation Symbol
DD4.1NV-W DB6K1-4X/50YV RE 25731 W 160 x D 125 x H 105 1.8 70 6 100 50 15 Manual
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Components / valves Pressure control valves Manual operation Load lowering valve Material no. Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure bar max. Flow max. l/min Type of actuation Symbol
R961002540 DD13.N-W A-VBSO-SE78-14-35 Data sheet: A-VBSO-SE78-VS5C2V2-14-35 W 120 x D 155 x H 25 1.23 70 6 100 15 Manual
79/164
80/164 Bosch Rexroth AG Hydraulics
Components / valves Pressure control valves Electrical operation Pressure switch Material no.
R961003488
With mounting kit, inclusive of cable Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Operating pressure max. bar Adjustment range bar Switching accuracy % Electrical connection Contact load max. Permissible switching cycles / h Type of actuation Symbol
Pressure switch Material no.
DD6E.3 HED8OA1X/100K14 RE 50060 W 89 x D 125 x H 40 1.27 70 100 4 to 100 < ± 1 of adjustment range Plug-in connection to DIN 43650 form A, 3-pin + PE VAC: 250 V - 5 A VDC: 50 V - 1 A; 125 V - 0,03 A 4800 Manual by means of spindle
R961003555
Programmable, electronic pressure switch Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Operating pressure max. bar Adjustment range bar Switching accuracy % Electrical connection Contact load max. mA Switching cycles Hz Symbol
DD6E.5 HEDE10 RE 30278 W 50 x H 150 x D 50 0.450 45 100 0 - 100 0.5 K41 (M12) 250 170
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Components / valves Pressure control valves Electrical operation Pressure relief valve, pilot operated Material no. R961002553 For subplate mounting, with rotary knob, with directional spool valve normally closed, with concealed manual override, without mating connector Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Set pressure max. bar Flow max. l/min Type of voltage VDC Type of actuation Symbol
DD15E.NV-W DBW10A1-5X/50-6EG24N9K4 RE 25802 and RE 23178 W 140 x D 140 x H 100 8.4 70 10 100 50 15 24 Electrical
Proportional pressure relief valve Material no. R961002555 For external control electronics, internal pilot oil supply, mounted on component plate Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Pilot flow l/min Flow max. l/min Type of voltage Control current min. mA Control current max. mA Type of actuation Symbol
DD12E.NV-W DBE6-1X/50G24NK4M RE 29158 W 205 x D 125 x H 127 3.5 70 6 100 0.6 - 1.2 15 DC voltage 100 1600 Via proportional solenoid
81/164
82/164 Bosch Rexroth AG Hydraulics
Components / valves Pressure control valves Electrical operation Proportional pressure relief valve Material no. R961003924 Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Operating pressure max. bar Adjustment range bar Hysteresis % Electrical connection Contact load max. mA Symbol
DD18E.NV-W DBEE6-1X/50 RE 29158 3.2 50 100 50 1.5 K31 1600
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Components / valves Flow control valves Manual operation Throttle valve Material no.
R961002539
With colour scale Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Flow max. l/min Control range l/min Type of actuation Symbol
Throttle check valve Material no.
DF1.2N-W DV06-1-1X/V RE 32502 L 195 x H 65 x D 30 0.40 70 6 100 15 0 - 15 Manual
R961002495
With colour scale Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Flow max. l/min Cracking pressure of check valve bar Control range l/min Type of actuation Symbol
DF2.2N-W DRV06-1-1X/V RE 32502 L 195 x H 65 x D 30 0.41 70 6 100 15 0.5 0 - 15 Manual
83/164
84/164 Bosch Rexroth AG Hydraulics
Components / valves Flow control valves Manual operation 2-way flow control valve Material no.
R961002546
With lockable rotary knob with scale, without closing of the pressure compensator, mounted on component plate Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Flow max. l/min Cracking pressure of check valve bar Control range l/min Type of actuation Symbol
Oil flow divider Material no.
DF3.NV-W 2FRM6B36-3X/10QRV RE 28163 W 80 x D 125 x H 183 2.13 70 6 100 15 0.7 0 - 10 Manual
R961002537
Double-acting Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Inlet flow l/min Division ratio % Division error max. Symbol
DF6.N-W DRF-OM.51.03.90-02-11 Data sheet 8.51.01 L 143 x H 40 x D 225 1.62 70 6 100 6.5 - 11 50 - 50 ±3
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Components / valves Flow control valves Electrical operation Proportional flow control valve Material no. R961002557 With position transducer, mounted on component plate Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Flow l/min Control range l/min Cracking pressure of check valve bar Type of voltage Current per solenoid max. A Type of actuation Symbol
DF4E.NV-W 2FRE6B-2X/10Q K4 RV RE 29188 W 108 x D 125 x H 267 3.91 50 6 100 Up to 10 0.05 -10 0,7 DC voltage 1.5 Via proportional solenoid
85/164
86/164 Bosch Rexroth AG Hydraulics
Components / valves Isolator valves Manual operation Ball valve Material no. Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure bar max. Symbol
R961002491 DZ2.1N-W AB 21-20/G1/4-500 AB 21-20 W = 220 x D = 40 x H = 80 0.63 70 6 100
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Components / valves Isolator valves Hydraulic operation Check valve Material no. Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Cracking pressure bar Flow max. l/min Symbol
Check valve Material no.
R961002489 DS2.1N-W S6A1.0/ RE 20375 L 150 x Ø 40 0.33 70 6 100 1.0 Approx. 18 at Δp = 7 bar
R961002471
With hose, 630 mm long Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Cracking pressure bar Flow max. l/min Symbol
DS2.N-W S6A1.0/ RE 20375 L 1000 x Ø 40 0.83 70 6 100 1.0 Approx. 18 at Δp = 7 bar
87/164
88/164 Bosch Rexroth AG Hydraulics
Components / valves Isolator valves Hydraulic operation Check valve Material no. Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Cracking pressure bar Flow max. l/min Symbol
Check valve Material no.
R961002522 DS3.1N-W S6A3.0/ RE 20375 L 150 x Ø 40 0.34 70 6 100 3.0 Approx. 18 at Δp = 7 bar
R961002472
With hose, 630 mm long Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Cracking pressure bar Flow max. l/min Symbol
DS3.N-W S6A3.0/ RE 20375 L 1000 x Ø 40 0,84 70 6 100 3.0 Approx. 18 at Δp = 7 bar
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Components / valves Isolator valves Hydraulic operation Check valve, pilot operated Material no. R961002513 Without leakage port Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Size Operating pressure max. bar Cracking pressure bar Flow max. l/min Type of actuation Symbol
DS1.1NV-W SV6PB1-6X/ RE 21460 L 85 x D 125 x H 85 2.1 70 6 100 1.5 15 Hydraulic
Distributor with check valve Material no. R961002519 With integrated measuring connection and check valve S6A0.0 Didactic designation Dimensions Weight Temperature max. Nominal pressure Flow Symbol
mm kg °C bar l/min
DZ4.3N-W W 160 x D 180 x H 40 1.1 70 100 15
89/164
90/164 Bosch Rexroth AG Hydraulics
Components / energy converters Cylinders Single-rod cylinder Material no.
R961003494
Tie rod design with foot mounting and actuating cams on the piston rod, without end position cushioning, mounted on protective metal sheet for the installation of proximity switches Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Nominal pressure bar Bore mm Piston rod diameter mm Piston area ratio Stroke mm Stroke velocity m/s Symbol
Single-rod cylinder Material no.
ZY1.6N-W CD70F25/16-200Z11/ 01HCUM11T RE 17016 L 620 x D 170 x H 170 4.20 70 70 25 16 1.6:1 200 0.5
R961003495
Tie rod design with foot mounting and actuating cams on the piston rod, without end position cushioning, mounted on protective metal sheet for the installation of proximity switches Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg Temperature max. °C Nominal pressure bar Bore mm Piston rod diameter mm Piston area ratio Stroke mm Stroke velocity m/s Symbol
ZY1.7N-W CD70F25/16-400Z11/ 01HCUM11T RE 17016 L 1020 x D 170 x H 170 6,57 70 70 25 16 1.6:1 400 0.5
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Components / energy converters Hydraulic motors Orbital motor Material no.
R961002505
With leakage oil port, mounted on component plate Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg
DM8.N-W on request on request W 120 x D 205 x H 230 4.60
Temperature max. Inlet pressure max. Speed max. Torque max. Displacement Oil flow max. Power max. Symbol
50 100 1950 11 8.2 16 1.8
°C bar 1/min Nm cm3 l/min kW
Axial piston motor Material no.
R961002811
Bent-axis design, constantly reversible direction of rotation, mounted on component plate Didactic designation Industrial type Information on industrial type Dimensions mm Weight kg
DM2.1N-W A2F5/60W-C3 RE 91001 W 130 x D 230 x H 205 5.2
Temperature max. Inlet pressure max. Speed max. Torque max. Displacement Oil flow max. Power max. Symbol
50 100 10000 24.7 4.93 49 25.9
°C bar 1/min Nm cm3 l/min kW
91/164
92/164 Bosch Rexroth AG Hydraulics
Components / hydraulic accessories Hydraulic accumulators Hydraulic accumulators Material no.
R961002503
Diaphragm-type, manual unloading, with type-tested pressure relief valve Didactic designation Industrial type: Accumulator Industrial type: Safety block Information on industrial type Information on industrial type Dimensions mm Weight Temperature max. Size Nominal pressure Pressure rating Nominal capacity Symbol
DZ3.2N-W HAD 0,7-350-1X
ABZSS10M-2X/100B/S30V Accumulator: AB 42-01 Safety block: RE 50131 W 182 x D 338 x H 157
kg 11.60 °C DN bar bar l
70 10 100 100 0.75
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Components / hydraulic accessories Pressure filter Pressure filter Material no.
R961002526
For in-line installation in pressures pipes, with by-pass valve and visual clogging indicator Didactic designation Industrial type
DZ8.N-W ABZFD-S0040-10N-100-1X/ M-A RE 50076
Information on industrial type Dimensions mm W 92 x D 84 x H 178 Weight Temperature max. Nominal pressure Series Filtration rating Flow rate Symbol
kg 2.1 °C 70 bar 100 40 μ 10 l/min 350
93/164
94/164 Bosch Rexroth AG Hydraulics
Components / hydraulic accessories Distributor Component plate distributor Material no. R961002563 Quadruple on component plate Didactic designation Dimensions Weight
DZ4.NV-W mm W 80 x D 125 x H 80 kg 1.2
Symbol
Distributor Material no.
R961002485
Quadruple Didactic designation Dimensions Weight
DZ4.2N-W mm W 190 x D 40 x H 80 kg 0.86
Symbol
Distributor with pressure gauge Material no. R961002530 Quadruple with pressure gauge Didactic designation Dimensions Weight Symbol
DZ1.N-W mm W 80 x D 125 x H 105 kg 1.15
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Components / hydraulic accessories Pressure gauge Pressure gauge, inclusive of MSK Material no. R961003403 With mounting kit, diameter 63 mm, scaling 5 bar Didactic designation Weight Pressure range
DZ1.6 kg 0.6 bar 0 - 60
Pressure gauge, inclusive of MSK Material no. R961002715 With mounting kit, diameter 63 mm, scaling 5 bar Didactic designation Weight Pressure range
DZ1.4 kg 0.6 bar 0 - 100
Pressure gauge, inclusive of MSK Material no. R961002720 With mounting kit, diameter 63 mm, scaling 5 bar Didactic designation Weight Pressure range
DZ1.5 kg 0.6 bar 0 - 160
Precision pressure gauge, inclusive of MSK Material no. R900843486 With bracket mount, scaling 0.5 bar, class 0.6 Didactic designation Weight Pressure range
DZ18.1 kg 2.5 bar 0 - 100
95/164
96/164 Bosch Rexroth AG Hydraulics
Components / hydraulic accessories Pressure gauge Measuring hose for minimess connection Material no. R900011191 Pressure range 100 bar Didactic designation Weight Length
MSK kg 0.1 mm 1000
Measuring hose for minimess connection Material no. R900013105 Pressure range 100 bar Didactic designation Weight Length
Clamp holder Material no.
MSL kg 0.2 mm 2000
R961003498
For mounting a pressure gauge on the grid Weight Dimensions
kg 0.125 mm L 45 x W 44 x H 110
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Components / hydraulic accessories Hoses Hose line Material no.
R961002474
NW 08, pressure range 100 bar Didactic designation Weight Length
Hose line Material no.
VSK1.N-W kg 0.64 mm 630
R961002475
NW 08, pressure range 100 bar Didactic designation Weight Length
Hose line Material no.
VSL1.N-W kg 0.74 mm 1000
R961002473
NW 08, pressure range 100 bar Didactic designation Weight Length
VSL2.N-W kg 0.86 mm 1500
97/164
98/164 Bosch Rexroth AG Hydraulics
Components / hydraulic accessories Hoses Hose line Material no.
R961002480
NW 08, pressure range 100 bar Didactic designation Weight Length
Hose line Material no.
VSL3.N-W kg 0.95 mm 2000
R961002479
NW 08, pressure range 100 bar Didactic designation Weight Length
VSL4.N-W kg 1.12 mm 2500
Hose line with angled connection Material no. R961002477 NW 08, pressure range 100 bar Didactic designation Weight Length
VSL3.1N-W kg 1.08 mm 2000
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG
DS4
Components / hydraulic accessories Hoses Hose line with minimess connection Material no. R961002481 NW 08, pressure range 100 bar Didactic designation Weight Length
DZ25.3N-W kg 0.83 mm 630
Hose line with minimess connection Material no. R961002476 NW 08, pressure range 100 bar Didactic designation Weight Length
DZ25.1N-W kg 0.93 mm 1000
Hose line with minimess connection Material no. R961002482 NW 08, pressure range 100 bar Didactic designation Weight Length
DZ25.4N-W kg 1.05 mm 1500
Hose line with minimess connection Material no. R961002478 NW 08, pressure range 100 bar Didactic designation Weight Length
DZ25.2N-W kg 1.18 mm 2000
99/164
100/164 Bosch Rexroth AG Hydraulics
Components / hydraulic accessories Tools Pipe set, straight Material no. Didactic designation Weight
R961002524 DZ5.N-W kg 3.9
3 pipes 1 pipe 1 pipe
0.75 m long (4 x 1; 6 x 1.5; 8 x 1.5) 0.50 m long (6 x 1.5) 0.25 m long (6 x 1.5)
Tool bag Material no.
R900865138
Consisting of: Double-headed spanners 10 x 11; 12 x 13; 14 x 17; 18 x 19 Screw drivers 0.7 x 4.0; 0.95 x 5.5 Phillips screw driver Spanners 2.5; 3.0; 4.0; 6.0 Didactic designation Weight
Mounting grid Material no.
Z2 kg 1.0
R900309278
With table top frame Didactic designation Dimensions Weight Grid
Wiper roll dispenser Material no.
DZ39 mm 880 x 585; angle approx. 60° kg 11.5 mm 50 x 50
R900833872
Consisting of: Wheel-mounted wiper roll dispenser Waste container with cover, 40 L Binder Wipers Waste bags Didactic designation Weight
Z3 kg 35.0
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 101/164
DS4
Components / hydraulic accessories Tools Measuring hose coupling Material no.
R900009090
With screw-in pin G 1/4 A Didactic designation Weight Pressure range
AB 20-11/K1 kg 0.1 bar 0 - 60
Pressure unloading sleeve Material no. R961002927 For unloading isolated pressures Didactic designation Dimensions Weight
Coupler plug Material no. Dimensions Weight
DRK mm 78.5 x Ø 50 kg 0.19
R961000482 mm 41 x 17 A/F kg 0.05
Connection thread
G 1/4 A
Coupling sleeve Material no.
R961000481
Dimensions Weight
mm 66 x 19 A/F kg 0.17
Connection thread
G 1/4 A
Material no.
R961000480 M16 x 1.5
Connection thread
102/164 Bosch Rexroth AG Hydraulics
Components / hydraulic accessories Tools Hydraulic oil Material no.
R900019287
RSL 22 in a bin Weight Contents
Filter element Material no.
kg 21 l 20
R900037088
For return line filters of power units DS4 Weight
kg 0.1
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 103/164
DS4
Components / hydraulic accessories Working material required according to BiBB Stopwatch, digital Material no.
R900061256
Quartz variant, 1/100 sec, time and date Didactic designation Weight
UHR kg 0.27
Filling and testing device Material no.
R900001439
For filling and testing the hydraulic accumulator Didactic designation Dimensions Weight Pressure gauge indicating range
Tachometer Material no.
FPU mm L 450 x D 350 x H 100 kg 3.15 bar 0 - 250
R900065201
Visual - mechanical, 5-digit LCD display, 10 mm high Didactic designation Dimensions Weight
DREH/OM mm L 120 x W 95 x H 60 kg 0.65
104/164 Bosch Rexroth AG Hydraulics
Components / electrics Operating modules of 19“ installation technique Operating module, distributor Material no. R900897345 14 inputs/outputs (red) 14 inputs/outputs (blue) Didactic designation Dimensions Weight
BPS 13.1 mm 3HE; 21TE; 1HE = 44.45 mm; 1TE = 5.08 mm kg 0.52
Operating module, switches Material no. R900719908 With 4 push-buttons and 2 switches, each fitted with 1 normally open and 1 normally closed contact Switching voltage max 24 VDC Switching current max 5 ADC Didactic designation Dimensions Weight
BPS 7.4 mm 3HE; 42TE; 1HE = 44.45 mm; 1TE = 5.08 mm kg 1.35
Operating module, signal output Material no. R900897341 With 2 indicator lamps (green/red) 1 buzzer Signal voltage Umax + 24 VDC Didactic designation Dimensions Weight
BPS 8.1 mm 3HE; 21TE; 1HE = 44.45 mm; 1TE = 5.08 mm kg 0.41
Operating module, relay Material no.
R900897337
With 3 x 4 change-over contacts with function indication Didactic designation Dimensions Weight
BRS 1.2 mm 3HE; 42TE; 1HE = 44.45 mm; 1TE = 5.08 mm kg 1.5
Switching voltage
VDC
24
Response voltage
VDC
18
Drop-out voltage
VDC
1,2
Continuous current max. ADC
5
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 105/164
DS4
Components / electrics Operating modules of 19“ installation technique Operating module, time relay Material no. R900897346 Electronic relay with 2 change-over contacts Can be changed over for pick-up and release delay Indication by LEDs Didactic designation Dimensions
Weight Switching voltage Delay time Switching current max.
BRS 2.1 mm 3HE; 21TE; 1HE = 44.45 mm; 1TE = 5.08 mm kg 0.4 VDC 24 s 0 - 10 ADC 5
Operating module, command value provision Material no. R961001957 With 2 10-turn potentiometers 2 rotary switches with momentary-contact function (changeover contact) Didactic designation Dimensions
Weight
BPS 5.1 mm 3HE; 21TE; 1HE = 44.45 mm; 1TE = 5.08 mm kg 0.41
Operating module, command/actual value display Material no. R900711665 With 2 digital voltmeters 3 1/2-digit, character height approx. 13 mm Voltage supply 24 VDC, measuring-circuit voltage max 20 VDC Didactic designation Dimensions
Weight
BPS 6.1 mm 3HE; 21TE; 1HE = 44.45 mm; 1TE = 5.08 mm kg 0.25
106/164 Bosch Rexroth AG Hydraulics
Components / electrics Operating modules of 19“ installation technique Command value module BPS 20 Material no. R961000107 Command value module for 4 command values and 5 ramps Didactic designation Dimensions
Weight
BPS 20.0 mm 3HE; 21TE; 1HE = 44.45 mm; 1TE = 5.08 mm kg 0.370
Connection panel BPS 21.0 Material no. R961001630 Connection panel for integrated electronics Didactic designation Dimensions
Weight
BPS 21.0 mm 3HE; 14TE; 1HE = 44.45 mm; 1TE = 5.08 mm kg 0.2
DS4
RE 00843/02.07
RE 00843/02.07
DS4
Components / electrics Operating modules of 19“ installation technique Operating module for proportional amplifier VT-VRPA1 Material no. R900711658 With 2 inputs (red/black) for connection to a + 24 VDC voltage supply 1 input (yellow) for the external or internal provision of command values 2 inputs (yellow) for the external input of command values via PLC or CNC 2 outputs (blue) - 9 V supply for external or internal potentiometers for the provision of command values 2 outputs (red) + 9 V supply for external or internal potentiometers for the provision of command values 1 output (yellow) for measuring the set ramp 2 outputs (black) for controlling solenoids A and B 3-pin connection for a valve position transducer 10-turn potentiometer for the external provision of command values Didactic designation Dimensions
Weight
BPS 2.1 mm 3HE; 34TE; 1HE = 44.45 mm; 1TE = 5.08 mm kg 1.39
Operating module for proportional amplifier VT-VSPA1 Material no. R900711662 With 2 inputs (red/black) for connection to a + 24 VDC voltage supply 1 input (yellow) for the external or internal provision of command values 2 inputs (yellow) for the external input of command values via PLC or CNC 2 outputs (blue) - 9 V supply for external or internal potentiometers for the provision of command values 2 outputs (red) + 9 V supply for external or internal potentiometers for the provision of command values 1 output (yellow) for measuring the set ramp 3 sockets (yellow) for switching the “up - down” ramp on and off 2 outputs (black) for controlling solenoid A 10-turn potentiometer for the external provision of command values Didactic designation Dimensions
Weight
BPS 3.1 mm 3HE; 34TE; 1HE = 44.45 mm; 1TE = 5.08 mm kg 1.37
Hydraulics Bosch Rexroth AG 107/164
108/164 Bosch Rexroth AG Hydraulics
Components / electrics Operating modules of 19“ installation technique Proportional amplifier VT-VRPA1-150-1X/V0/0 Material no. R901057058 For controlling proportional valves with electrical position feedback (proportional flow control valve DF4E (analogue)) Information on industrial RE 30118 type Dimensions mm 3HE; 4TE; 1HE = 44.45 mm; 1TE = 5.08 mm Weight kg 0.2
Proportional amplifier VT-VSPA1 Material no. R900033823 For controlling proportional pressure control valves without electrical position feedback and only one solenoid as actuator (proportional pressure relief valve DD12E (analogue)) Information on industrial RE 30111 type Dimensions mm 3HE; 3TE; 1HE = 44.45 mm; 1TE = 5.08 mm Weight kg 0.10
Power supply unit with emergency stop Material no. R900847434 19" version, short-circuit-proof, stabilised, key switch with spring return, visual status indicator, OFF key, miniature fuse 1.6 A, slow-blowing Didactic designation Dimensions
Weight
N3 mm 3HE; 42TE; 1HE = 44.45 mm; 1TE = 5.08 mm; D = 170 kg 2.5
Input voltage
VAC 230
Output voltage
VDC 2 x 24
Output current max.
A 5
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 109/164
DS4
Components / electrics Operating modules of 19“ installation technique Partial front panel 19“ Material no. Dimensions
Weight
Partial front panel 19“ Material no. Dimensions
Weight
Partial front panel 19“ Material no. Dimensions
Weight
Partial front panel 19“ Material no. Dimensions
Weight
R961001336 mm 3HE; 4TE; 1HE = 44.45 mm; 1TE = 5.08 mm kg 0.05
1827008410 mm 3HE; 7TE; 1 HE = 44.45 mm; 1TE = 5.08 mm kg 0.06
1827008409 mm 3HE; 8TE; 1HE = 44.45 mm; 1TE = 5.08 mm kg 0.07
1827008408 mm 3HE; 21TE; 1HE = 44.45 mm; 1TE = 5.08 mm kg 0.07
110/164 Bosch Rexroth AG Hydraulics
Components / electrics Desktop power supply unit Power supply unit Material no.
R900891151
Desktop device, short-circuit-proof, electronically stabilised, current limitation and protection against overtemperature, including power cable Didactic designation Dimensions Weight
EP6 mm B 225 x H 138 x D 265 kg 5.83
Input voltage
VAC 230
Output voltage
VDC 0 - 30
Output current max. Power Residual ripple content
A 3 VA 102 mV/ms < 2
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 111/164
DS4
Components / electrical components Connection cables Solenoid cable Material no.
R900846807
With LED, form A DIN 43650, 2-wire, black plug Didactic designation Dimensions Weight
Solenoid cable Material no.
E1 mm L 3000 kg 0.3
R900846808
With LED, form A DIN 43650, 2-wire, grey plug Didactic designation Dimensions Weight
Solenoid cable Material no.
E2 mm L 3000 kg 0.3
R900846809
Without LED, form A DIN 43650, 2-wire, grey plug Didactic designation Dimensions Weight
Solenoid cable Material no.
E3 mm L 3000 kg 0.3
R900846812
Without LED, form A DIN 43650, 2-wire, black plug Didactic designation Dimensions Weight
Cable set Material no.
E4 mm L 3000 kg 0.3
R900826555
For actual and command value measurements 2 adapter cables, each from 2 to 4 mm plug, black and red Didactic designation Dimensions Weight
Pressure switch cable Material no.
E5 mm L 1000 kg 0.27
R900846817
With plug, form A DIN 43650, 4-wire Didactic designation Dimensions Weight
E6 mm L 3000 kg 0.3
112/164 Bosch Rexroth AG Hydraulics
Components / electrical components Connection cables Position transducer cable Material no.
R900844180
Connection cable for proportional valves with analogue control, 3-pin and 3-wire Didactic designation Dimensions Weight
E13 mm L 3000 kg 0.23
Measurement cable set, small Material no. R900029597 Consisting of: 39 shockproof measurement cables 10 off red and green each, 250 mm long 5 off red and green, 500 mm long 3 off black, 500 mm long 2 off,red and black each, 1000 mm long 1 off red and blue each, 2000 mm long Didactic designation Weight
E16 kg 1.1
Measurement cable set, large Material no. R900021502 Consisting of: 64 shockproof measurement cables 10 off red, green and black each, 250 mm long 5 off red, green and black, 500 mm long 5 off black, 750 mm long 4 off red and black each, 750 mm long 2 off red and black each, 1000 mm long 1 off red and blue each, 2000 mm long Didactic designation Weight
Connection cable Material no.
E17 kg 1.78
R900891300
Connection cable for power supply unit EP6, industrial wiring Didactic designation Dimensions Weight
EP7.1 mm L 3000 kg 0.25
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 113/164
DS4
Components / electrical components Connection cables Solenoid cable Material no.
R900891642
With LED, form A DIN 43650, 2-wire, grey plug, industrial wiring Didactic designation Dimensions Weight
Solenoid cable Material no.
E2.1 mm L 3000 kg 0.3
R900891643
With LED, form A DIN 43650, 2-wire, black plug, industrial wiring Didactic designation Dimensions Weight
E1.1 mm L 3000 kg 0.3
Connection cable for integrated electronics Material no. R961003550 Dimensions Weight
mm L 1500 kg 0.450
114/164 Bosch Rexroth AG Hydraulics
Components / electrical components Proximity switch Proximity switch, inductive Material no. R961003106 Didactic designation Dimensions Weight Sensing range
DE2 mm L 3000 kg 0.20 mm 8
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 115/164
DS4
Components / measuring technology Measuring instruments Multihandy 2042 Material no.
R961001938
ISDS (Intelligent Sensor Detection System) • 2 analogue measurement inputs for 4 to 20 or 0 to 20 mA measuring signals • Calculation from two measuring signals to provide sums or pressure differentials • 8-line user guidance via menu or shortcut selection • A maximum of 3 measured values can be displayed • Automatic adjustment of size on the display • Min./Max. indication • 10-bit converter • Battery/ext. power supply 12 to 30 VDC • Battery warning indication Dimensions
mm W 80 x H 165 x D 45
Weight
kg 0.66
Standard measured variables
Pressure (bar) p1 and p2
Multihandy 3050 with software HydroCOMsys/WIN Material no. R900739196 ISDS (Intelligent Sensor Detection System) The major advantages: • 4 measuring channels • 8 lines, illuminated LCD display • Text input • Min. / max. indication • Adjustment of representation • Calculated values • 12-bit A/D converter • Max. 450 000 measured values / 14 memory locations • Centronics, RS232 and USB interface • Trigger / pre-trigger (saving) • Operation with menu-guidance or direct shortcut selection • Graphical or tabular printouts • Real-time clock • Battery / ext. power supply 12 to 30 VDC Dimensions
mm W 107 x H 203 x D 76
Weight Standard measured variables
kg 1.2 Pressure, pressure peaks, pressure differential, flow rate, speed, DC current, DC voltage, force, torque, travel and velocity can be freely selected with 5-digit indication. Speed: from 60 min-1 (referred to 1 scan marking), 5character indication
116/164 Bosch Rexroth AG Hydraulics
Components / measuring technology Measuring instruments Multihandy 5050 with Software HydroCOMsys/WIN Material no. R900733191 ISDS (Intelligent Sensor Detection System) The essential advantages: • 6 measuring channels • 16-line LCD display for text and graphic • Text input • Min. / Max. indication • Representation adjustment • Calculated values • 12-bit converter • Max. 500 000 measured values / 36 storage locations • Centronics, RS232 and USB interface • Trigger / pre-trigger and cyclic saving • External trigger input • Switching output • Logic operation of two trigger conditions • Graphical and tabular analysis on the display • Online representation y = f (t) and y = f (x) • Operation through menu guidance or direct shortcut selection • Graphical or tabular printouts • Indication of date and time • Battery / ext. power supply 24 to 30 VDC Dimensions Weight Standard measured variables
mm W 108 x H 277 x D 84 kg 1.91 Pressure, pressure peaks, pressure differential, flow rate, speed, DC current, DC voltage, force, torque, travel and velocity can be freely selected with 5-digit indication and floating point.
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 117/164
DS4
Components / measuring technology Measuring instruments Software HydroCOMsys/WIN Material no. R961001939 In conjunction with software “HYDROcomsys/WIN32”, each ISDS measuring device fitted with an RS 232 or USB interface can transmit measured data. The data can be displayed in graphical or tabular form. The graphics can be edited and text added. As a result, a corresponding test report can be created. The test curves can be laid above each other for examinations of long-term monitoring; moreover, repeated measurements can be easily checked in this way. The results can be saved on a floppy disk or comfortably sent as eMail attachment. The communication from the service engineer to the production or from the development department to the components manufacturer can thus be significantly shortened. This powerful software forms the simple connecting link between a PC and a measuring instrument and allows advanced analyses in many industrial systems.
Data transmission cable Material no.
R961001947
RS232 for Multihandy 2042 Dimensions Weight
Multimeter Material no.
mm L 3000 kg 0.25
R900897502
With 12 mm high LED display, 3 1/2 digits, 19 measuring ranges, solar version Didactic designation Dimensions Weight Current max.
E24 mm W 90 x H 40 x D 180 kg 0.25 A 10
118/164 Bosch Rexroth AG Hydraulics
Components / measuring technology Sensors Pressure transducer Material no.
R900738915
With ISDS Didactic designation Dimensions Weight
DZ37.1 mm Ø 40 x 100 kg 0.17
Output current
mA 0 - 20
Measuring range
bar 0 - 200
Pressure transducer Material no.
R900868620
Thin-film strain gauge / relative pressure, with 5-pin test connection Didactic designation Dimensions Weight Output current
DZ37 mm Ø 40 x 100 kg 0.41 mA 0 - 20
Measuring range
bar 0 - 200
Own current consumption Frequency response
mA 4
Speed sensor Material no.
Hz 0 - 500
R900892375
With optical reflexion light barrier, with pulsating red light, with measurement cable Didactic designation Dimensions Weight
E19 mm L 3000 kg 0.43
Switching current max.
mA 200
Response time
ms 1
Signal sequence freHz 500 quency max. Supply voltage VDC 7.5 - 30 Speed sensor Material no.
R900754481
With optical reflexion light barrier, with pulsating red light, with inegrated F/I converter and with measurement cable for Multihandy 2042 Didactic designation Dimensions Weight Time constant
E19.1 mm L 2500 kg 0.45 s 2.5
Signal sequence fre- kHz 1 quency max. Supply voltage VDC 12 - 24 hum-free
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 119/164
DS4
Components / measuring technology Sensors Temperature sensor Material no.
R900749653
With ISDS Didactic designation Dimensions Weight Measuring signal output Measuring range Supply voltage
Temperature sensor Material no.
TEMP2 mm Ø 40 x 100 kg 0.46 mA 0 - 20 °C - 50 to + 200 VDC 10 - 30
R900213937
With temperature-related resistance measurement Didactic designation Dimensions Weight Measuring signal output Measuring range Supply voltage
Gear flow sensor Material no.
TEMP1 mm Ø 40 x 100 kg 0.46 mA 0 - 20 °C - 50 to + 200 VDC 10 - 30
R961002508
With ISDS, mounted on component plate Didactic designation Dimensions Weight
DZ30.2N-W mm W 230 x H 180 x D 115 kg 3.38
Measuring range
l/min 0.2 - 30
Impulse pro
dm3 Approx. 1640
Gear flow sensor Material no.
R961002536
As a basis for evaluations, impulses are counted for the flow per time. These impulses can be output in any unit, e.g. l/min. Mounted on component plate Didactic designation Dimensions Weight
DZ30.1N-W mm W 230 x H 180 x D 115 kg 3.38
Measuring range
l/min 0.2 - 30
Impulses per
dm3 Approx. 1640
120/164 Bosch Rexroth AG Hydraulics
Components / measuring technology Sensors F/I converter Material no.
R900704454
For gear flow sensor Didactic designation Dimensions Weight Output current
Flowmeter Material no.
F/I mm Ø 25 x 2000 long kg 0.18 mA 0 - 20
R961002561
FM-222-112 Didactic designation Dimensions Weight Pressure max. Measuring range
DZ35.1N-W mm Ø 60 x 160 kg 0.66 bar 100 l/min 1.0 - 7.5
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 121/164
DS4
Components / measuring technology Measurement cable Measurement cable Material no.
R900733207
For ISDS Didactic designation Dimensions Weight
MKS mm L 2500 kg 0.35
Measurement cable Material no.
R900063746
For connection to pressure, speed, temperature and flow sensors Didactic designation Dimensions Weight
MK01 mm L 2500 kg 0.35
Data transmission cable Material no.
R900225944
RS232, 9-pin / 9-pin Didactic designation Dimensions Weight
DK mm L 2000 kg 0.38
USB cable Material no.
R900778981
For Multihandy 3050 / 5050 Didactic designation Dimensions Weight
USB-K mm L 1500 kg 0.36
122/164 Bosch Rexroth AG Hydraulics
Components / measuring technology Accessories Test case Material no.
R900733194
For storing various measuring technology components Didactic designation Dimensions Weight
KOFFER mm L 390 x W 294 x H 106 kg 3.4
Plastic case Material no.
R900210004
For storing various measuring technology components Didactic designation Dimensions Weight
KOFFER1 mm L 394 x W 294 x H 196 kg 1.1
Plug-in power supply unit Material no. Didactic designation Dimensions Weight
R900210002
NETZ mm L 2500 kg 0.54
Input voltage
VAC 230
Output voltage
VDC 24
Output current
mA 340
Plug-in power supply unit Material no. Didactic designation Dimensions Weight
R900225942
NETZ1 mm L 2500 kg 0.55
Input voltage
VAC 115
Output voltage
VDC 24
Output current
mA 350
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 123/164
DS4
Components / mobile hydraulics Control device
1 directional valve, 1 hand lever Mobile control block Material no.
R961002532
SM-2860-00/1SM-12PR Control block of 6-way design Sandwich plate design Inlet element Directional valve Outlet element Actuation by hand lever Didactic designation DW1.N-MH-W Information on industrial RE 64122 type Dimensions mm L 270 x W 260 x H 240 Weight Operating pressure max.
kg 11.4 bar 100
124/164 Bosch Rexroth AG Hydraulics
Components / mobile hydraulics Control device
2 directional valves, 2 hand lever Mobile control block Material no.
R961002533
SM-2861-00/1SM-12PR Control block of 6-way design, tandem Sandwich plate design Inlet element 2 directional valves Outlet element Actuation by hand lever (2 x) Didactic designation DW2.N-MH-W Information on industrial type RE 64122 Dimensions mm L 270 x W 260 x H 240 Weight Operating pressure max.
kg 16.5 bar 100
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 125/164
DS4
Components / mobile hydraulics Control device
2 directional valves, 1 hand lever Mobile control block Material no.
R961002531
SM-2862-00/1SM-12PR Control block of 6-way design, parallel Sandwich plate design Inlet element 2 directional valves Outlet element Actuation by hand lever (1x) Hydraulically controlled (1x) Didactic designation DW3.N-MH-W Information on industrial type RE 64122 Dimensions mm L 270 x W 260 x H 240 Weight Operating pressure max.
kg 17 bar 100
126/164 Bosch Rexroth AG Hydraulics
Components / mobile hydraulics Pilot control device Pilot control device Material no.
R961002541
1-2TH 6 L06-1X/M01 1 control axis Actuation by lever without detent for controlling DW3.N-MH-W Didactic designation DZ1.1N-MH-W Information on industrial type RE 64552 Dimensions mm L 430 x W 190 x H 170 Weight Operating pressure max. Symbol
kg 11.4 bar 100
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 127/164
DS4
Table of contents: Sectional models Contents Pumps
Page 128
• Vane pump 128 Valves
129-131
• Directional valves 129 • Pressure control valves 130 • Flow control valves 131
128/164 Bosch Rexroth AG Hydraulics
Sectional models / pumps Sectional model - vane pump Material no.
R900018226
Industrial type
XM-PV7-1X/
Weight
kg 10.5
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 129/164
DS4
Sectional models / directional valves Sectional model - directional poppet valve Material no.
R900018245
Industrial type
XM-M-3SEW10U10/
Weight
kg 1.9
Sectional model - directional valve Material no. Industrial type Weight
R900553112 XM-4WE 10 J3X/CG24NK4 kg 6.1
Sectional model - directional valve, pilot operated Material no.
R900968342
Industrial type
XM-4WEH10E4X/
Weight
kg 5.7
Sectional model - proportional directional valve Material no.
R900018229
Industrial type
XM-4WRE10E64-1X/
Weight
kg 6.5
130/164 Bosch Rexroth AG Hydraulics
Sectional models / pressure control valves Sectional model - pressure reducing valve, pilot operated Material no.
R900018213
Industrial type
XM-DR10-4-4X/
Weight
kg 2.0
Sectional model - pressure relief valve Material no. Industrial type Weight
R900018206 XM-DB20-1-5X/315 kg 3.2
Sectional model - pressure reducing valve Material no.
R900018212
Industrial type
XM-DR6DP1-5X/
Weight
kg 1.3
Sectional model - proportional pressure reducing valve Material no.
R900018228
Industrial type
XM-DREM10-5X/
Weight
kg 4.3
Sectional model - proportional pressure reducing valve Material no.
R900018227
Industrial type
XM-3DREP6C1X/
Weight
kg 2.5
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 131/164
DS4
Sectional models / flow control valves Sectional model - check valve Material no.
R900018232
Industrial type
XM-S10A1.X/
Weight
kg 0.27
Sectional model - check valve with leakage port Material no. Industrial type Weight
R900018238 XM-SL10GB2-4X/ kg 1.6
Sectional model - double throttle check valve Material no.
R900018224
Industrial type
XM-Z2FS6-2-4X/
Weight
kg 0.7
Sectional model - check valve Material no.
R900018240
Industrial type
XM-Z2S6-1-6X/
Weight
kg 0.7
132/164 Bosch Rexroth AG Hydraulics
Notes
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 133/164
DS4
Table of contents: Teachware Contents Training manuals for trainers and trainees
Page 134-135
Contents Software
Page 141-145
• BiBB - Basic principles 134
• Hydraulic Trainer 141
• BiBB - Electrohydraulics 134
• Hydrostatic Calculations with the Help of Excel 141
• BiBB - Project exercises 134
• Web Tr@iner Hydraulics - Basic Principles 142
• Proportional hydraulics 134
• HYmedia / 1 142
• Mobile hydraulics 135
• Web Tr@iner Electrohydraulics 143
• Troubleshooting on hydraulic systems
• Hymedia / 2 143 • Web Tr@iner Proportional and Closed-loop Control Hydraulics 144
Textbooks
136-140
• HYmedia / 3 144
• Hydraulics, Basic Principles and Components, Volume 1 136
• CD-ROM HYgraphics 145
• Proportional and Servo-valve Technology, Volume 2 137
• CD-ROM HY1graphics 145
• Planning and Design of Hydraulic Systems, Volume 3 137 • Technology of 2-way Cartridge Valves, Volume 4 138
Sets of slides
146-147
• Fluid Power Technology A-Z, Volume 5 138
• Introduction into Hydraulics 146
• Hydrostatic Drives with Control of the Secondary Unit, Volume 6 138
• Selected Products of the Hydraulic Product Range 146
• Wörterbuch der Fluidtechnik/Dictionary of fluid power technology 139
• Overview of Hydraulic Components 146
• Hydraulics in Theory and Practice 139
• Proportional Hydraulics 147
• Hydraulics in Mobile Machinery 140 Working material
148
• HY /PN symbol stencil
148
• HY slide rule
148
• Case with symbol stickers
148
134/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Teachware / training manuals for trainers and trainees Trainer‘s and trainee‘s manuals: The manuals are matched to the component sets proposed by BiBB and provide training at the various training stages in the field of hydraulics in line with practical needs. Detailed information for trainees and instructors complement the set of exercises. The manuals feature a uniform structure and explain step by step how the individual experiments are to be set up. The Trainee's Manual includes check sheets for entering the results obtained. Comprehension questions round off the series of experiments.
Trainer‘s manuals
Trainee‘s manuals
BiBB Hydraulics, Basic Principles
BiBB Hydraulics, Basic principles
Trainer‘s manual
Trainee‘s manual
Material no.
DE
R900209841
RD 00216
Material no.
DE
R900209840
RD 00217
Material no.
EN
R900215921
RE 00216
Material no.
EN
R900215919
RE 00217
Material no.
ES
R900215922
RS 00216
Material no.
ES
R900215920
RS 00217
BiBB Electrohydraulics
BiBB Electrohydraulics
Trainer‘s manual
Trainee‘s manual
Material no.
DE
R900075881
RD 00233
Material no.
DE
R900075882
RD 00234
Material no.
EN
R900071655
RE 00233
Material no.
EN
R900071656
RE 00234
R900215924
RS 00233
Material no.
ES
R900215923
RS 00234
Material no.
ES
Project Manual Industrial Hydraulics
Project Manual Industrial Hydraulics
Trainer‘s manual
Trainee‘s manual
Material no.
DE
R961002427
RD 00845
Material no.
DE
R961002429
RD 00846
Material no.
EN
R961003790
RE 00845
Material no.
EN
R961003751
RE 00846
Material no.
ES
R961003791
ES 00845
Material no.
ES
R961003765
RS 00846
Project Manual Proportional Valve Technology
Project Manual Proportional Valve Technology
Trainer‘s manual
Trainee‘s manual
Material no.
DE
R961003779
RD 00847
Material no.
DE
R961003780
RD 00848
Material no.
EN
R961003876
RE 00847
Material no.
EN
R961003875
RE 00848
R961003872
RS 00847
Material no.
ES
R961003874
RS 00848
Material no.
ES
Project Manual Mobile Hydraulics, Throttle Control
Project Manual Mobile Hydraulics, Throttle Control
Trainer‘s manual
Trainee‘s manual
Material no.
R961003839
RD 00886
DE
Material no.
DE
R961003840
RD 00887
Material no.
EN
R961003889
RE 00886
Material no.
EN
R961003891
RE 00886
Material no.
ES
R961003888
RS 00886
Material no.
ES
R961003890
RS 00886
RE 00843/02.07
Hydraulics Bosch Rexroth AG 135/164
DS4
Teachware / training manuals for trainers and trainees Troubleshooting Includes all exercises that can be realized with the set "troubleshooting for manually operated directional valve DW4N R961002891“ Material no.
DE
R900054511
RD 00261
Material no.
EN
R961003805
RE 00261
Material no.
ES
R961003954
RS 00261
136/164 Bosch Rexroth AG Hydraulics
DS4
Teachware / textbooks “The Hydraulic Trainer" Training and informative books from the series "The Hydraulic Trainer“ The books describe the structure and operating principle of components of hydraulic drive and open and closed-loop control technology.
Volume 1 Hydraulics, Basic Principles and Components Contents • Basic principles • Graphical symbols to DIN ISO 1219 • Hydraulic fluids • Hydraulic pumps • Hydraulic motors • Axial piston units • Hydraulic cylinders • Slew drives • Hydraulic accumulators and their application • Isolator valves • Directional valves • Pressure control valves (flow control valves) • Filters and filtration techniques • Accessories • Connection techniques • Hydraulic small power units Photos, drawings, circuit diagrams as well as graphics are available on CD-ROM “HY1graphics” R961000799. No. of pages
325
Material no.
DE
R900018613
RD 00290
Material no.
EN
R900018614
RE 00290
Material no.
ES
R900018617
RS 00290
Volume 1 + CD-ROM “Hydraulic Trainer CBT“ Material no.
DE
R900884049
RD 00290
Material no.
EN
R900884050
RE 00290
Material no.
ES
R900884051
RS 00290
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 137/164
DS4
Teachware / textbooks “The Hydraulic Trainer" Volume 2 Proportional and Servo-valve Technology Contents • Entry into proportional valve technology • Proportional valves, component technology • Load compensation by pressure compensator • Control techniques for proportional valves • Criteria for engineering a control with proportional valves • Entry into servo-valve technology • Servo-valves, component technology • From the simple control to the closed control loop • Filtration in hydraulic systems with servo- and proportional valves • Examples of systems with servo- and proportional valves No. of pages
286
Material no.
DE
R900018625
RD 00291
Material no.
EN
R900018626
RE 00291
Material no.
ES
R900018629
RS 00291
Volume 3 Planning and Design of Hydraulic Systems Contents • Engineering of hydraulic systems • Hydraulic fluids • Heat balance in hydraulic systems • Hydraulic accumulators • Safety regulations and arrangement of hydraulic accumulators in hydraulic systems • Design of steel structures for hydraulic power units • Noise reduction measures • Calculation and dimensioning of pipes in hydraulic systems • Internal preservation of hydraulic components and hydraulic power units • Corrosion protection by coating materials on outer surfaces • Packaging and transport • Commissioning of hydraulic systems • Servicing of hydraulic systems No. of pages
376
Material no.
DE
R900018538
RD 00281
Material no.
EN
R900018547
RE 00281
Material no.
ES
R900018549
RS 00281
138/164 Bosch Rexroth AG Hydraulics
DS4
Teachware / textbooks “The Hydraulic Trainer" Volume 4 Technology of 2-way cartridge valves Contents • Entry into the technology of 2-way cartridge valves • Directional functions (design variants and notes on the application) • Pressure control functions • Flow control functions • Set-up of a control with 2-way cartridge valves • Examples of controls with 2-way cartridge valves No. of pages
146
Material no.
DE
R900018537
RD 00280
Material no.
EN
R900018543
RE 00280
Material no.
ES
R900018546
RS 00280
Volume 5 Fluidtechnik von A - Z Contents Approx. 3000 terms with definitions and explanations of specific terms in the field of hydraulics and pneumatics as well as their related areas such as measurement, open and closedloop controls and electronics. The keywords are listed in German and English. An English index complements the book. No. of pages Material no.
446 DE
R900828272
RD 00249
Volume 6 Hydrostatic Drives with Control of the Secondary Unit including CD-ROM Contents • Terms and definitions • Symbols used • History of the development of the secondary control at Rexroth • Basic principle of secondary control • Axial piston units for use in secondary control systems • Dynamics of a drive with secondary control • Electronic components of systems with drives with secondary control • Special characteristics of the secondary control • Application examples of secondary controlled drives in the industrial and mobile sector • Application examples of secondary controlled drives in testing and simulation technology • Low-loss cylinder control in a hydraulic ring mains with impressed operating pressure • The electric drive with variable speed • Notes on the engineering of secondary controlled drives No. of pages
196
Material no.
DE
R961002392
RD 00248
Material no.
EN
R961002391
RE 00248
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 139/164
DS4
Teachware / textbooks Wörterbuch der Fluidtechnik/dictionary of fluid power technology Contents Approx. 4000 terms in five languages, source language German, i.e. the terms were translated into the individual foreign languages. Languages
English French Spanish Italian
No. of pages Material no.
360 DE
R900018563
RD 09063
Hydraulics in Theory and Practice Contents The book deals in a compact form with all topics of "oil hydraulics" (excluding proportional and closed-loop control hydraulics) from the generation of pressure through to troubleshooting in hydraulic systems. Apart from the description of components, the book focuses on the representation of circuits for practical applications in the field of stationary and mobile hydraulics. Drawings, circuit diagrams and colour graphics from the books are also available on the CD-ROM “HYgraphics” R900701017. No. of pages
291
Material no.
DE
R961000782
Material no.
EN
R961000784
140/164 Bosch Rexroth AG Hydraulics
Teachware / textbooks Hydraulics in Mobile Machinery Contents • Introduction into hydraulics • Pumps and hydraulic motors in general • Gear pumps and motors • Electrohydraulic pumps • Compact power units • Isolator valves • Pressure control valves • Flow control valves • Directional valves • Basic circuits of mobile hydraulics • Directional valve blocks for mobile applications • Applications • Electrohydraulic hitch control for tractors (EHR) • Hydrostatic fan drives in vehicles • CAN bus in der mobile hydraulics • Fluids No. of pages
202
Material no.
DE
R961000790
Material no.
EN
R961000791
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 141/164
DS4
Teachware / software Hydraulic Trainer CBT Version 4.0 Revised version of the Hydraulic Trainer with updated graphics and new user guidance. The contents, circuits and sectional models were adapted to the new Hydraulic Trainer, Volume 1 Hydraulics, Basic Principles and Components Contents • Basic principles of hydraulics • Physical basic principles • Exercises relating to the individual chapters • Specialist dictionary • Secondary control • Axial piston units • Animation of circuits and components System requirements • Microsoft Windows 98 / NT 4.0 / ME / 2000 / XP SP1 • Pentium 200 MHz or better • 32 MB RAM • Min. XGA, monitor resolution 1024 x 768 • Approx. 70 MB hard disk space • CD-ROM drive Material no.
DE/EN/ES
R900884371
Hydrostatic Calculations with the Help of Excel This software is a selection of individual, not interrelated spreadsheets in which calculation formulas are saved. Contents Linear drives • Velocity chart • Single rod cylinder • Double rod cylinder • Cylinder in a regenerative circuit • Natural frequency of the single rod cylinder • Natural frequency of the double rod cylinder • Natural frequency of the plunger cylinder Rotary drives • Speed chart • Travel chart • Hydraulic motor, fixed displacement • Natural frequency of the hydraulic motor • Moment of inertia General • Pump power • Pipes • Hydraulic accumulator • Orifice • Compressibility Material no.
DE
R900854114
RD 00559
Material no.
EN
R900856334
RE 00559
142/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Teachware / software The programs of the Web Tr@iner series were developed using Internet technology and allow a new way of learning on a PC. The use of multimedia elements in conjunction with interactive simulation promotes the motivation of the trainee and ensures the sustained transfer of knowledge through exercises in "virtual practice". The WebTr@iner is suitable for both, autodidacts who want WebTr@iner Hydraulics - Basic Principles Contents • Pumps (gear pump/vane pump) • 4/3 directional valve • Throttle valve/1 • Throttle valve/2 • Pressure relief valve • 3-way pressure reducing valve • 2-way flow control valve • Check valve, pilot operated • System with pressure accumulator • Throttle control of cylinder velocity System requirements • Microsoft Windows 98 / NT 4.0 / SP4 / ME / 2000 / XP SP1 • Pentium 200 MHz or better • 64 MB RAM (128 MB RAM required for XP) • Monitor resolution 1024 x 768, 65536 colours • 16-fold CD-ROM drive • Microsoft Internet Explorer 5.x or Netscape Communicator 6.2 • Microsoft Internet Explorer 6.x for XP • Sun Java Runtime Environment (JRE for XP) Material no.
DE/EN/ES
1070083001
HYmedia/1 Contents • Media from WebTr@iner Hydraulics - Basic Principles (1070083001) System requirements • See above Material no.
DE/EN/ES
R961001728
to get familiar with a topic or refresh their knowledge, and for trainers and instructors who wish to integrate new training media in their lessons. An additional WebTr@iner Media on CD-ROM is available for each WebTr@iner. It includes separate media modules (e.g. videos, VRMLs, experiments from the WebTr@iners for integration in own didactic concepts).
RE 00843/02.07
Hydraulics Bosch Rexroth AG 143/164
DS4
Teachware / software WebTr@iner Electrohydraulics Contents • Solenoid coil for valves • 4/3 directional valve, electrically operated • Pressure unloading through 4/2 directional valve • Control of two cylinder velocities • Control of three cylinder velocities • Regenerative circuit of a cylinder • Sequence control of cylinders • Velocity control, rapid advance / working advance • Pressure switch • Adjustable pressure ranges System requirements • Microsoft Windows 98 / NT 4.0 / SP4 / ME / 2000 / XP SP1 • Pentium 200 MHz or better • 64 MB RAM (128 MB RAM required for XP) • Monitor resolution 1024 x 768, 65536 colours • 16-fold CD-ROM drive • Microsoft Internet Explorer 5.x or Netscape Communicator 6.2 • Microsoft Internet Explorer 6.x for XP • Sun Java Runtime Environment (JRE for XP) Material no.
DE/EN/ES
R961000819
HYmedia/2 Contents • Media from WebTr@iner Electrohydraulics (R961000819) System requirements • See above Material no.
DE/EN/ES
R961001729
144/164 Bosch Rexroth AG Hydraulics
Teachware / software WebTr@iner Proportional and Closed-loop Control Hydraulics Contents • Proportional solenoid • Proportional valves • Proportional pressure control valves • Proportional flow control valves • Closed-loop control of pressure and position • Closed-loop velocity control • Digital synchronisation • Control of power supply • Decentralised peripherals System requirements • Microsoft Windows 98 / NT 4.0 / SP4 / ME / 2000 / XP SP1 • Pentium 200 MHz or better • 64 MB RAM (128 MB RAM required for XP) • Monitor resolution 1024 x 768, 65536 colours • 16-fold CD-ROM drive • Microsoft Internet Explorer 5.x or Netscape Communicator 6.2 • Microsoft Internet Explorer 6.x for XP • Sun Java Runtime Environment (JRE for XP) Material no.
DE/EN/ES
R927001005
HYmedia/3 Contents • Media from WebTr@iner Proportional and Closed-loop Control Hyraulics (R927001005) System requirements • See above Material no.
DE/EN/ES
R961001730
DS4
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 145/164
DS4
Teachware / software CD-ROM “HYgraphics” Contents • 450 slides for the book “Hydraulics in theory and practice“ Material no.
DE/EN/ES
R900701017
CD-ROM “HY1graphics” Contents • 408 slides for the book “The Hydraulic Trainer“, Volume 1 Material no.
DE/EN/ES
R961000799
146/164 Bosch Rexroth AG Hydraulics
DS4
Teachware / sets of slides Introduction into Hydraulics Contents: 12 slides • Physical laws of fluid power technology • Types of flows • Simple hydraulic circuit Material no.
DE
R900018328
RD 00460
Material no.
EN
R900018329
RE 00460
Material no.
ES
R900892901
RS 00460
Overhead projector slides Component technology: Selected products of the hydraulic product range Contents: 44 slides • Basic principles • Pumps • Motors • Overlaps • Directional valves • Isolator valves • Pressure control valves • Flow control valves • Cylinders • Filters • Accumulators Material no.
DE
R900846222
RD 00812
Material no.
EN
R900846227
RE 00812
Material no.
ES
R900216021
RS 00812
Overhead projector slides Overview of components: Hydraulics Contents: 8 slides • Features of hydraulics • Comparison of power transmissions • Energy converters • Control elements • Servo, proportional and high-response valves • Power units and systems • Accessories • Connection techniques Material no.
DE
R900018332
RD 00462
Material no.
EN
R900018334
RE 00462
Material no.
ES
R900892902
RS 00462
RE 00843/02.07
RE 00843/02.07
Hydraulics Bosch Rexroth AG 147/164
DS4
Teachware / sets of slides Overhead projector slides Proportional hydraulics Contents: 25 slides • Signal flow • Application example • Overview of proportional hydraulics • Proportional solenoids • Valves • Spools • Characteristic curves • Circuit examples • Amplifiers • Position transducers Material no.
DE
R900018168
RD 00811
Material no.
EN
R900018169
RE 00811
Material no.
ES
R900216690
RS 00811
148/164 Bosch Rexroth AG Hydraulics
DS4
Teachware / working material HY/PN symbol stencil
HY - slide rule Material no.
DE
R900018482
RD 00383
Material no.
EN
R900018483
RE 00383
Material no.
ES
R900018485
RS 00383
Case with symbol stickers Material no. 1827003030 For pneumatics, hydraulics and electrics Dimensions mm W 450 x D 350 x H 120 Weight
kg 4.9
RE 00843/02.07
RE 00843/02.07
Notes
DS4
Hydraulics Bosch Rexroth AG 149/164
150/164 Bosch Rexroth AG Hydraulics
Notes
DS4
RE 00843/02.07
RE 00843/02.07
DS4
Hydraulics Bosch Rexroth AG 151/164
Overview of material numbers Material no. 1070083001 1827003030 1827003705 1827003721 1827003722 1827003725 1827003740 1827008408 1827008409 1827008410 1827008411 1827008412 1827008413 1827008414 1827008415 R900001439 R900009090 R900011191 R900013105 R900018168 R900018169 R900018206 R900018212 R900018213 R900018224 R900018226 R900018227 R900018228 R900018229 R900018232 R900018238 R900018240 R900018245 R900018328 R900018329 R900018332 R900018334 R900018482 R900018483 R900018485 R900018486 R900018537 R900018538 R900018543 R900018546 R900018547 R900018549 R900018563 R900018613 R900018614
Designation WebTr@iner Hydraulics - basic principles, single licence de, en, es Case with symbol stickers, pneumatics, hydraulics, electrics Writing surface set; LE2 Info panel; DIN A4; articulated Rag holder set; LE2 Monitor arm Power supply unit - DS3 115V~/4.5A Partial front panel 19“, 3HE, 21TE (30838-060) Partial front panel 19“, 3HE, 8TE (30838-047) Partial front panel 19“, 3HE, 7TE (30838-046) Switch box with 2x emergency stop, 115VAC without RCD Switch box with 2x emergency stop, 230VAC without RCD Electrical components for BIBB component set A - H; 19“ Electrical components for BIBB component set for additional experiments Z1 - Z3; 19“ Electrical components for BIBB component set for hydraulics; 19“ Filling and testing device Threaded coupling for measurements Measuring hose 1000 mm Measuring hose 2000 mm OHP, Proportionalhydraulik, 25 slides de OHP, Proportional hydraulics, 25 slides en Sectional model - Pressure relief valve DB20-1-5X/315 Sectional model - Pressure reducing valve DR6DP1-5X/ Sectional model - Pressure reducing valve, pilot operated DR10-4-4X/ Sectional model - Double throttle check valve Z2FS6-2-4X/ Sectional model - Vane pump PV7-1X/ Sectional model - Proportional pressure reducing valve 3DREP6C1X/ Sectional model - Proportional pressure reducing valve DREM10-5X/ Sectional model - Proportional directional valve 4WEH10E64-1X/ Sectional model - Check valve S10A1.X/ Sectional model - Check valve with leakage port SL10GB2-4X/ Sectional model - Check valve Z2S6-1-6X/ Sectional model - Directional poppet valve M-3SEW10U2X/ OHP, Einführung in die Hydraulik, 12 slides, de OHP, Introduction into Hydraulics, 12 slides, en OHP, Komponentenübersicht: Hydraulik, 8 slides de OHP, Overview of components: Hydraulics, 8 slides en Rechenschieber - HY de Slide rule - HY en Slide rule - HY es Symbol stencil HY/PN Hydraulik Trainer, Band 4 de Hydraulik Trainer, Band 3 de Hydraulic Trainer, Volume 4 en Hydraulic Trainer, Volume 4 es Hydraulic Trainer, Volume 3 en Hydraulic Trainer, Volume 3 es Wörterbuch / Dictionary of Fluid Technology de, en, es, fr, it Hydraulik Trainer, Band 1 de Hydraulic Trainer, Volume 1 en
Page 142 148 30 34 34 34 24 109 109 109 25 25 40 42 43 103 101 96 96 147 147 130 130 130 131 128 130 130 129 131 131 131 129 146 146 146 146 148 148 148 148 138 137 138 138 137 137 139 136 136
152/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Overview of material numbers Material no. R900018617 R900018625 R900018626 R900018629 R900019287 R900021502 R900029597 R900033823 R900037088 R900054511 R961003805 R961003954 R900061256 R900063746 R900065201 R900071655 R900071656 R900075881 R900075882 R900209840 R900209841 R900210002 R900210004 R900213937 R900215919 R900215920 R900215921 R900215922 R900215923 R900215924 R900216021 R900216690 R900225942 R900225944 R900309278 R900553112 R900701017 R900704454 R900711658 R900711662 R900711665 R900719908 R900733191 R900733194 R900733207 R900738894 R900738915 R900739196 R900749653 R900754481
Designation Hydraulic Trainer, Volume 1 es Hydraulik Trainer, Volume 2 de Hydraulic Trainer, Volume 2 en Hydraulic Trainer, Volume 2 es Hydraulic oil RSL 22 Measurement cable set (large) Measurement cable set (small) Proportional amplifier VT-VSPA1 Filter element for return line filters of power units DS4 Lehrer- u. Schülerhandbuch Fehlersuche de Trainer‘s and trainee‘s manual Troubleshooting en Trainer‘s and trainee‘s manual Troubleshooting es Stopwatch, digital, quartz 1/100 s time + date Measurement cable Tachometer vis./mech. Trainer‘s manual, Electrohydraulics en Trainee‘s manual, Electrohydraulics en Lehrerhandbuch, Elektrohydraulik de Schülerhandbuch, Elektrohydraulik de Schülerhandbuch, BiBB Hydraulik - Grundlagen de Lehrerhandbuch, BiBB Hydraulik - Grundlagen de Plug-in power supply unit, 230VAC Plastic case Temperature sensor Trainee‘s manual, BiBB Hydraulics - basic principles en Trainee‘s manual, BiBB Hydraulics - basic principles es Trainer‘s manual, BiBB Hydraulics - basic principles en Trainer‘s manual, BiBB Hydraulics - basic principles es Trainee‘s manual, Electrohydraulics es Trainer‘s manual, Electrohydraulics es OHP; Component technology: Hydraulics, 44 slides es OHP, Proportional hydraulics, 25 slides es Plug-in power supply unit, 115VAC Data transmission cable RS232 (9-pin / 9-pin) Mounting grid with table top 800 x 545 Sectional model - Directional valve 4WE 10 J3X/CG24NK4 CD-ROM “HYgraphics“, slides for the book “Hydraulics in theory and practice“ de, en, fr F/I converter Operating module, proportional flow control valve, BPS 2.1 Operating module, proportional pressure relief valve, BPS 3.1 Operating module, command and actual value display, BPS 6.1 Operating module, 4 push-buttons, 2 switches, BPS 7.4 Multihandy 5050 incl. software HydroCOMsys/WIN Test case Measurement cable (ISDS) Measuring technology, component set minimal for PC (series 3) Pressure transducer 0 - 200 bar / output 0 - 20 mA with ISDS Multihandy 3050 incl. software HydroCOMsys/WIN Temperature sensor with ISDS Speed sensor (output 4-20 mA)
Page 136 137 137 137 102 112 112 108 102 135 135 135 103 121 103 134 134 134 134 134 134 122 122 119 134 134 134 134 134 134 146 147 122 121 100 129 145 120 107 107 105 104 116 122 121 56 118 115 119 118
RE 00843/02.07
DS4
Hydraulics Bosch Rexroth AG 153/164
Overview of material numbers Material no. R900778981 R900826555 R900828272 R900833872 R900843486 R900844180 R900846222 R900846227 R900846807 R900846808 R900846809 R900846812 R900846817 R900847434 R900854114 R900856334 R900865138 R900868620 R900884049 R900884050 R900884051 R900884371 R900891300 R900891642 R900891643 R900892375 R900892901 R900892902 R900897337 R900897341 R900897345 R900897346 R900897502 R900968342 R901057058 R901133999 R901134000 R901134001 R901134002 R927001005 R961000107 R961000154 R961000155 R961000156 R961000160 R961000166 R961000167 R961000169 R961000170 R961000187
Designation USB cable for Multihandy 3050/5050 L = 1.5 m Cable set (command value measurement) Hydraulik Trainer, Band 5 de Wiper roll dispenser Precision pressure gauge 0 - 100 bar including MSK Position transducer cable for proportional valves (analogue control) OHP; Gerätetechnik Hydraulik, 44 slides de OHP; Component technology: Hydraulics, 44 slides en Solenoid cable with LED, form A, black plug Solenoid cable with LED, form A, grey plug Solenoid cable without LED, form A, grey plug Solenoid cable without LED, form A, black plug Pressure switch cable Power supply unit 230 VAC / 24 VDC - 5 A with emergency stop Hydrostatische Berechnungen mit Excel de Hydrostatic calculations with the help of Excel en Tool bag for hydraulics Pressure transducer 0 - 200 bar / output 0 - 20 mA Hydraulik Trainer CBT, Band 1 + CD-ROM de Hydraulic Trainer CBT, Volume 1 + CD-ROM en Hydraulic Trainer CBT, Volume 1 + CD-ROM es Hydraulik Trainer CBT CD-ROM de, en, es Connection cable for power supply unit - industrial wiring Solenoid cable with LED, form A, grey plug - industrial wiring Solenoid cable with LED, form A, black plug - industrial wiring Speed sensor OHP, Introduction into Hydraulics, 12 slides, es OHP, Overview of components: Hydraulics, 8 slides es Operating module, relay 3-fold, BRS 1.2 Operating module, signal output, BPS 8.1 Operating module, distributor, BPS 13.1 Operating module, time relay, BRS 2.1 Multimeter Sectional model - Directional valve, pilot operated 4WEH10E4X/ Proportional amplifier VT-VRPA1 Hydraulic power unit, 400 V / 50 Hz; 2.2 kW; 3~; with single pump Hydraulic power unit, 400 V / 50 Hz; 2.2 kW; 3~; with double pump Hydraulic power unit; 230 V / 50 Hz; 1.5 kW; 1~ Hydraulic power unit; 230 V / 50 Hz; 1.5 kW; 1~; with double pump WebTr@iner Proportional and Closed-loop Control Hydraulics, single licence de, en, es Command value module BPS 20 Oil pan 326 x 725 mm for DS4 with mounting kit Oil pan 737 x 725 mm for DS4 with mounting kit Oil pan 1148 x 725 mm for DS4 with mounting kit Base frame TS-DS4 -1X Racks 210TE, 2 x 3HE Racks 210TE; 3HE Grooved panel for DS3-G and DS4 with mounting pins Power supply unit - DS3 230V~/4.5A incl. 3 m connection cable Load simulator, swivelling
Page 121 111 138 100 95 112 146 146 111 111 111 111 111 108 141 141 100 118 136 136 136 141 112 113 113 118 146 146 104 104 104 105 117 129 108 17 18 17 18 144 106 20 19 19 14 22 22 16 24 29
154/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Overview of material numbers Material no. R961000188 R961000192 R961000210 R961000226 R961000287 R961000288 R961000289 R961000312 R961000480 R961000481 R961000482 R961000563 R961000564 R961000568 R961000782 R961000784 R961000790 R961000791 R961000799 R961000819 R961000835 R961000962 R961000963 R961001336 R961001630 R961001728 R961001729 R961001730 R961001938 R961001939 R961001947 R961001957 R961002156 R961002216 R961002391 R961002392 R961002427 R961002429 R961002471 R961002473 R961002474 R961002475 R961002476 R961002477 R961002478 R961002479 R961002480 R961002481 R961002482 R961002485
Designation Hose tray DS Table grid; 560 x 361 mm Grid with reinforcement Mounting frame Container, wheel-mounted Container, for installation into control trolley or DS4 Switch box with 2 x emergency stop, 400VAC without RCD Mounting kit for power unit Coupling sleeve Coupling sleeve M16 x 1.5 Coupler plug Assortment of drawer dividers DS 100 (18 x 36E) (80.635) Assortment of drawer dividers DS 150 (18 x 36E) (80.636) Anti-skid mat (18 x 36E) (119.000) Hydraulik in Theorie und Praxis, book de Hydraulics in theory and practice, book en Hydraulik in mobilen Arbeitsmaschinen, book de Hydraulics in mobile machinery, book en CD-ROM “HY1graphics“ de, en, fr WebTr@iner Electrohydraulics, single licence de, en, es Mounting kit for integrated container Switch box with 2 x emergency stop, 400 VAC with RCD Switch box with 2 x emergency stop, 230 VAC with RCD Partial front panel 19“, 3HE, 4TE (30838-043) Connection plate BPS 21 HYmedia/1 de, en, es HYmedia/2 de, en, es HYmedia/3 de, en, es Multihandy 2042 Software HydroCOMsys/WIN for Multihandy 2042 Data transmission cable RS232 for Multihandy 2042 Operating module, command value provision, BPS 5.1 Measuring technology, component set, minimal (series 2) replaces R900893189 Mounting kit with grooved panel DS3-G/DS4 Hydraulic Trainer, Volume 6 + CD-ROM en Hydraulik Trainer, Band 6 + CD-ROM de Lehrerhandbuch, Projekthandbuch Industriehydraulik de Schülerhandbuch, Projekthandbuch Industriehydraulik de Check valve S6A1.X with hose 630 mm Hose line 1500 mm Hose line 630 mm Hose line 1000 mm Hose line 1000 mm with minimess connection Hose line 2000 mm with angled connection Hose line 2000 mm with minimess connection Hose line 2500 mm Hose line 2000 mm Hose line 630 mm with minimess connection Hose line 1500 mm with minimess connection Distributor
Page 28 30 16 15 33 18 26 20 101 101 101 33 33 33 139 139 140 140 145 143 20 26 25 109 106 142 143 144 115 117 117 105 52 15 138 138 134 134 87 97 19, 97 19, 97 99 98 99 98 98 99 99 94
RE 00843/02.07
DS4
Hydraulics Bosch Rexroth AG 155/164
Overview of material numbers Material no. R961002489 R961002491 R961002495 R961002503 R961002505 R961002508 R961002509 R961002510 R961002511 R961002513 R961002515 R961002519 R961002520 R961002522 R961002524 R961002526 R961002530 R961002531 R961002532 R961002533 R961002536 R961002537 R961002539 R961002540 R961002541 R961002544 R961002545 R961002546 R961002547 R961002548 R961002549 R961002550 R961002551 R961002552 R961002553 R961002554 R961002555 R961002557 R961002558 R961002561 R961002563 R961002564 R961002567 R961002634 R961002715 R961002720 R961002811 R961002884 R961002885 R961002886
Designation Check valve S6A1.X Ball valve AB 21-20/G1/4-500 Throttle check valve DRV06-1-1X/V Hydraulic accumulators, diaphragm-type, shut-off block for grid Gear motor Gear flow sensor 0.2 - 30 l/min with ISDS Directional valve 4/4 high-response valve OBE 4WRPEH 6 C3 B04L-2X/G24K0/A1M Directional valve 4/3, 4WMM6J5X Directional valve 4/3, 4WMM6H5X Check valve, pilot operated SV 6 PB1-6X/ Directional valve 4/3, proportional, integr. electronics 4WREE6E08-2X/G24K31/A1V Distributor for HY-Control Pressure relief valve DBDH6G1X/100 Check valve S6A3.X Pipe set - straight In-line filter ABZFD-S0040-10N-100-1X/M-A Pressure gauge 0- 100 bar with distribution Mobile control block SM12 (1x hand lever / 1x hydraulic) Mobile control block SM12 (1 hand lever valve) Mobile control block SM12 (2 hand lever valves) Gear flow sensor 0.2 - 30 l/min Flow divider 50/50% DRF-OM.51.03.90-02-11 Throttle valve DV06-1-1X/V Load lowering valve A-VBSO-SE78-14-35 Pilot control device Pressure reducing valve, direct operated DR6DP1-5X/75YM Pressure relief valve, pilot operated DB6K1-4X/50YV Flow control valve 2-way 2FRM6B36-3X/10QRV Directional valve 4/2, 4WE6C6X/EG24N9K4 Directional valve 4/3, 4WE6G6X/EG24N9K4 Directional valve 4/3, 4WE6E6X/EG24N9K4 Directional valve 4/3, 4WMM6G5X Directional valve 4/3, 4WMM6E5X/F Directional valve 4/2, 4WMM6C5X Pressure relief valve, pilot operated DBW10A1-5X Directional valve 4/3, 4WE6J6X/EG24N9K4 Pressure relief valve, prop., DBE6-1X/50G24NK4M Flow control valve, prop., 2FRE6B-2X/10QK4RV Pressure sequencing valve, direct operated, DZ6DP1-5X/75Y Flowmeter 1.0 - 7.5 l/min Distributor, component plate Measuring glass 2,5 l P/T distributor; pressureless circulation Hose tray, large Pressure gauge, diameter 63, 0 - 100 bar incl. MSK Pressure gauge, diameter 63, 0 - 160 bar incl. MSK Axial piston motor A2F5W6.0C3 Measuring technology, component set, standard for PC (series 3) Measuring technology, component set, standard for PC (series 3) HY-Control component set for DS3-G / DS4
Page 87 86 83 92 91 119 76 71 72 89 76 89 77 88 100 93 94 125 123 124 119 84 83 79 126 77 78 84 73 73 74 70 71 70 81 74 81 85 78 120 94 27 21 28 95 95 91 58 60 50
156/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Overview of material numbers Material no. R961002887 R961002888 R961002890 R961002891 R961002892 R961002893 R961002897 R961002898 R961002927 R961003106 R961003128 R961003176 R961003403 R961003445 R961003488 R961003494 R961003495 R961003498 R961003533 R961003549 R961003550 R961003555 R961003751 R961003765 R961003779 R961003780 R961003790 R961003791 R961003839 R961003840 R961003872 R961003874 R961003875 R961003876 R961003924
Designation BIBB component set A-H, electrically operated valves (series 4) BIBB component set A-H, hand lever valves (series 4) Mobile hydraulics, component set, basic principles Troubleshooting, component set DW4.N Troubleshooting, component set DW4E.N BIBB component set, hydraulic components for additional experiments Z1-Z3 (series 2) Proportional technology, component set, flow control valve DF4E (analogue); 19“ Proportional technology, component set, pressure relief valve DD12E (analogue) Pressure unloading sleeve Proximity switch, inductive Component carriers with 2 grids Component carriers with 1 grid Pressure gauge, diameter 63, 0 - 60 bar incl. MSK Measuring technology, component set, standard (series 2) replaces R900893191 Pressure switch HED8OA1X/100K14 incl. cable Cylinder, single-rod CD70F25/16-200Z11/01HCUM11T Cylinder, single-rod CD70F25/16-400Z11/01HCUM11T Clamp for mounting a pressure gauge on the grid Directional valve 4/3, prop. Proportional technology, component set, 4/3 proportional directional valve 4WREE6 Connection cable for integrated electronics Pressure switch HEDE10 Trainee‘s manual, Project Manual Industrial Hydraulics en Trainee‘s manual, Project Manual Industrial Hydraulics es Lehrerhandbuch, Projekthandbuch Stetigventiltechnik de Schülerhandbuch, Projekthandbuch Stetigventiltechnik de Trainer‘s manual, Project Manual Industrial Hydraulics en Trainer‘s manual, Project Manual Industrial Hydraulics es Lehrerhandbuch, Mobilhydraulik de Schülerhandbuch, Mobilhydraulik de Trainer‘s manual, Project Manual Proportional Valve Technology es Trainee‘s manual, Project Manual Proportional Valve Technology es Trainee‘s manual, Project Manual Proportional Valve Technology en Trainer‘s manual, Project Manual Proportional Valve Technology en Pressure relief valve, prop.
Page 38 36 62 64 66 41 46 48 101 114 32 32 95 54 80 90 90 96 75 44 113 80 134 134 134 134 134 134 134 134 134 134 134 134 82
RE 00843/02.07
DS4
Hydraulics Bosch Rexroth AG 157/164
Index Page A Anti-skid mat (18 x 36E) (119.000) Assortment of drawer dividers DS 100 (18 x 36E) (80.635) Assortment of drawer dividers DS 150 (18 x 36E) (80.636) Axial piston motor A2F5W6.0C3 B Ball valve AB21-20/G1/4-500 Base frame TS-DS4-1X BIBB component set A-H, electrically operated valves (series 4) BIBB component set A-H, hand lever valves (series 4) BIBB component set, hydr. components for additional experiments Z1-Z3 (series 2) C Cable set (command value measurement) Case with symbol stickers, pneumatics, hydraulics, electrics CD-ROM “HY1graphics“, slides from the book “The Hydraulic Trainer Volume 1“ de, en, fr CD-ROM “HYgraphics“, slides for the book “Hydraulics in theory and practice“ de, en, fr CD-ROM media from WebTrainer Electrohydraulics CD-ROM media from WebTrainer Hydraulics - basic principles CD-ROM media from WebTrainer Proportional and Closed-loop Control Hydraulics Check valve S6A1.X Check valve S6A1.X with hose 630 mm Check valve S6A3.X Check valve S6A3.X with hose 630 mm Check valve, pilot operated SV 6 PB1-6X/ Clamp for mounting a pressure gauge on the grid Command value module BPS 20 Component carriers with 1 grid Component carriers with 2 grids Connection cable for integrated electronics Connection cable for power supply unit - industrial wiring Connection plate BPS 21 Container, for integration into control trolley or DS4 Container, wheel-mounted Coupler plug Coupling sleeve Coupling sleeve M16 x 1.5 Cylinder, single-rod, CD70F25/16-200Z11/01HCUM11T Cylinder, single-rod, CD70F25/16-400Z11/01HCUM11T D Data transmission cable RS232 (9-pin / 9-pin) Data transmission cable RS232 for Multihandy 2042 Directional valve 4/2, 4WE6C6X/EG24N9K4 Directional valve 4/2, 4WMM6C5X Directional valve 4/3, 4WE6E6X/EG24N9K4 Directional valve 4/3, 4WE6G6X/EG24N9K4 Directional valve 4/3, 4WE6J6X/EG24N9K4 Directional valve 4/3, 4WMM6E5X/F Directional valve 4/3, 4WMM6G5X Directional valve 4/3, 4WMM6H5X Directional valve 4/3, 4WMM6J5X
33 33 33 91 86 14 38 36 41 111 148 145 145 143 142 144 87 87 88 88 89 96 106 32 32 113 112 106 18 33 101 101 101 90 90 121 117 73 70 74 73 74 71 70 72 71
158/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Index Directional valve 4/3 prop. Directional valve 4/3, prop., integr. electronics, 4WREE6E08-2X/G24K31/A1V Directional valve 4/4 high-response control valve OBE 4WRPEH 6 C3 B04L-2X/G24K0/A1M Distributor Distributor, component plate Distributor with check valve Distributor with pressure gauge E Electrical components for BIBB component set A-H; 19“ Electrical components for BIBB component set, hydraulics; 19“ Electrical components for BIBB component set, additional experiments Z1-Z3; 19“ F F/I converter Filter element for return line filters of power units DS4 Filling and testing device Flow control valve, prop., 2FRE6B-2X/10QK4RV Flow control valve, 2-way, 2FRM6B36-3X/10QRV Flow divider 50/50% DRF-OM.51.03.90-02-11 Flowmeter 1.0-7.5 l/min G Gear flow sensor 0.2 - 30 l/min Gear flow sensor 0.2 - 30 l/min with ISDS Gear motor Grid with reinforcement Grooved panel for DS3-G and DS4 with mounting pins H Hose line 1000 mm Hose line 1000 mm with minimess connection Hose line 1500 mm Hose line 1500 mm with minimess connection Hose line 2000 mm Hose line 2000 mm with minimess connection Hose line 2000 mm with angled connection Hose line 2500 mm Hose line 630 mm Hose line 630 mm with minimess connection Hose tray DS Hose tray, large HY-Control component set for DS3-G / DS4 Hydraulic accumulators, diaphragm-type Hydraulic oil RSL 22 Hydraulic power unit 400 V / 50 Hz; 2.2 kW; 3~; with double pump Hydraulic power unit, 400 V / 50 Hz; 2.2 kW; 3~; with single pump Hydraulic power unit; 230 V / 50 Hz; 1.5 kW; 1~ Hydraulic power unit; 230 V / 50 Hz; 1.5 kW; 1~; with double pump Hydraulics in mobile machinery, book de Hydraulics in mobile machinery, book en Hydraulics in theory and practice, book de Hydraulics in theory and practice, book en Hydraulic Trainer CBT CD-ROM de, en, es
Page 76 75 75 94 94 89 94 40 43 42 120 102 103 85 84 84 120 119 119 91 16 16 19, 97 99 97 99 98 99 98 98 19, 97 99 28 28 50 92 102 18 17 17 18 140 140 139 139 141
RE 00843/02.07
DS4
Hydraulics Bosch Rexroth AG 159/164
Index Hydraulic Trainer CBT, Volume 1 + CD-ROM de Hydraulic Trainer CBT, Volume 1 + CD-ROM en Hydraulic Trainer CBT, Volume 1 + CD-ROM es Hydraulic Trainer, Volume 1 de Hydraulic Trainer, Volume 1 en Hydraulic Trainer, Volume 1 es Hydraulic Trainer, Volume 2 de Hydraulic Trainer, Volume 2 en Hydraulic Trainer, Volume 2 es Hydraulic Trainer, Volume 3 de Hydraulic Trainer, Volume 3 en Hydraulic Trainer, Volume 3 es Hydraulic Trainer, Volume 4 de Hydraulic Trainer, Volume 4 en Hydraulic Trainer, Volume 4 es Hydraulic Trainer, Volume 5 de Hydraulic Trainer, Volume 6 + CD-ROM de Hydraulic Trainer, Volume 6 + CD-ROM en Hydrostatic Calculations with the Help of Excel de Hydrostatic Calculations with the Help of Excel en I Info panel; DIN A4; articulated K L Load lowering valve A-VBSO-SE78-14-35 Load simulator, swivelling M Measuring glass 2,5 l Measurement cable Measurement cable (ISDS) Measurement cable set (large) Measurement cable set (small) Measuring hose 1000 mm Measuring hose 2000 mm Measuring technology, component set, minimal (series 2) replaces R900893189 Measuring technology, component set, minimal for PC (series 3) Measuring technology, component set, standard (series 2) replaces R900893191 Measuring technology, component set, standard for PC (series 3) Measuring technology, component set, standard for PC (series 3) Mobile control block SM12 (1 hand lever valve) Mobile control block SM12 (1x hand lever / 1x hydraulic) Mobile control block SM12 (2 hand lever valves) Mobile hydraulics, component set, basic principles Monitor arm Mounting frame Mounting grid with table top 800 x 545 Mounting kit for integrated container Mounting kit for power unit Mounting kit with grooved panel DS3-G/DS4 Multihandy 2042
Page 136 136 136 136 136 136 137 137 137 137 137 137 138 138 138 138 138 138 141 141 34
79 29 27 121 121 112 112 96 96 52 56 54 58 60 123 125 124 62 34 15 100 20 20 15 115
160/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Index Multihandy 3050 incl. software HydroCOMsys/WIN Multihandy 5050 incl. software HydroCOMsys/WIN Multimeter N O OHP; Component technology, hydraulics, 44 slides en OHP; Component technology, hydraulics, 44 slides es OHP; Component technology, hydraulics, 44 slides de OHP, Introduction into Hydraulics, 12 slides, es OHP, Overview of components: Hydraulics, 8 slides de OHP, Overview of components: Hydraulics, 8 slides en OHP, Overview of components: Hydraulics, 8 slides es OHP, Proportional hydraulics, 25 slides de OHP, Proportional hydraulics, 25 slides en OHP, Proportional hydraulics, 25 slides es Oil pan 737 x 725 mm for DS4 with mounting kit Oil pan 326 x 725 mm for DS4 with mounting kit Operating module, command and actual value display, BPS 6.1 Operating module, command value provision, BPS 5.1 Operating module, distributor, BPS 13.1 Operating module, proportional flow control valve, BPS 2.1 Operating module, proportional pressure relief valve, BPS 3.1 Operating module, relay 3-fold, BRS 1.2 Operating module, signal output, BPS 8.1 Operating module, time relay, BRS 2.1 Operating module, 4 push-buttons, 2 switches, BPS 7.4 P Partial front panel 19“, 3HE, 21TE (30838-060) Partial front panel 19“, 3HE, 4TE (30838-043) Partial front panel 19“, 3HE, 7TE (30838-046) Partial front panel 19“, 3HE, 8TE (30838-047) Pilot control device Pipe set - straight Plastic case Plug-in power supply unit, 115VAC Plug-in power supply unit, 230VAC Position transducer cable for prop. valve (analogue control) Power supply unit - desktop device, 230VAC/24VDC - 3A Power supply unit 230VAC/24VDC - 5A with emergency stop Power supply unit-DS3 115 V~ / 4.5 A Power supply unit-DS3 230 V~ / 4.5 A incl. 3 m connection cable Precision pressure gauge 0-100 bar incl. MSK Pressure filter ABZFD-S0040-10N-100-1X/M-A Pressure gauge, diameter 63, 0 - 100 bar incl. MSK Pressure gauge, diameter 63, 0 - 160 bar incl. MSK Pressure gauge, diameter 63, 0 - 60 bar incl. MSK Pressure reducing valve, direct operated DR6DP1-5X/75YM Pressure relief valve DBDH6G1X/100 Pressure relief valve, pilot operated DB6K1-4X/50YV Pressure relief valve, pilot operated DBW10A1-5X
Page 115 116 117
146 146 146 146 146 146 146 147 147 147 19 20 105 105 104 107 107 104 104 105 104 109 109 109 109 126 100 122 122 122 112 110 108 24 24 95 93 95 95 95 77 77 78 81
RE 00843/02.07
DS4
Hydraulics Bosch Rexroth AG 161/164
Index Pressure relief valve, prop. Pressure relief valve, prop., DBE6-1X/50G24NK4M Pressure sequencing valve, direct operated, DZ6DP1-5X/75Y Pressure switch HED8OA1X/100K14 incl. cable Pressure switch HEDE10 Pressure switch cable Pressure transducer 0 - 200 bar / output 0 - 20 mA Pressure transducer 0 - 200 bar / output 0 - 20 mA with ISDS Pressure unloading sleeve Proportional amplifier VT-VRPA1 Proportional amplifier VT-VSPA1 Proximity switch, inductive R Racks 210TE, 2x3HE Racks 210TE; 3HE Rag holder set; LE2 S Sectional model - Check valve with leakage port SL10GB2-4X/ Sectional model - Check valve S10A1.X/ Sectional model - Check valve Z2S6-1-6X/ Sectional model - Directional poppet valve M-3SEW10U2X/ Sectional model - Directional valve 4WE 10 J3X/CG24NK4 Sectional model - Directional valve, pilot operated 4WEH10E4X/ Sectional model - Double throttle check valve Z2FS6-2-4X/ Sectional model - Pressure reducing valve DR6DP1-5X/ Sectional model - Pressure reducing valve, pilot operated DR10-4-4X/ Sectional model - Pressure relief valve DB20-1-5X/315 Sectional model - Proportional pressure reducing valve 3DREP6C1X/ Sectional model - Proportional pressure reducing valve DREM10-5X/ Sectional model - Proportional directional valve 4WEH10E64-1X/ Sectional model - Vane pump PV7-1X/ Slide rule-HY de Slide rule-HY en Slide rule-HY es Software HydroCOMsys/WIN for Multihandy 2042 Solenoid cable with LED, form A, grey plug Solenoid cable with LED, form A, grey plug - industrial wiring Solenoid cable with LED, form A, black plug Solenoid cable with LED, form A, black plug - industrial wiring Solenoid cable without LED, form A, grey plug Solenoid cable without LED, form A, black plug Speed sensor Speed sensor (output 4 - 20 mA) Switch box with 2x emergency stop, 115VAC without RCD Switch box with 2x emergency stop, 115VAC with RCD Switch box with 2x emergency stop, 230VAC with RCD Switch box with 2x emergency stop, 230VAC without RCD Switch box with 2x emergency stop, 400VAC without RCD Switch box with 2x emergency stop, 400VAC with RCD Stopwatch digital, quartz 1/100 s time + date
Page 82 81 78 80 80 111 118 118 101 108 108 114 22 22 34 131 131 131 129 129 129 131 130 130 130 130 130 129 128 148 148 148 117 111 113 111 113 111 111 118 118 25 25 25 25 26 26 103
162/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Index Symbol stencil HY/PN T Table grid; 560 x 790 mm Tachometer, vis./mech. Temperature sensor Temperature sensor with ISDS Test case Threaded coupling for measurements Throttle check valve DRV06-1-1X/V Throttle valve DV06-1-1X/V Tool bag for hydraulics Trainee‘s manual, BiBB Hydraulics - Basic Principles de Trainee‘s manual, BiBB Hydraulics - Basic Principles en Trainee‘s manual, BiBB Hydraulics - Basic Principles es Trainee‘s manual, Electrohydraulics de Trainee‘s manual, Electrohydraulics en Trainee‘s manual, Electrohydraulics es Trainee‘s manual, Mobile hydraulics de Trainee‘s manual, Project Manual Industrial Hydraulics de Trainee‘s manual, Project Manual Industrial Hydraulics en Trainee‘s manual, Project Manual Industrial Hydraulics es Trainee‘s manual, Project Manual Proportional Valve Technology de Trainee‘s manual, Project Manual Proportional Valve Technology en Trainee‘s manual, Project Manual Proportional Valve Technology es Trainer‘s manual, BiBB Hydraulics - Basic Principles de Trainer‘s manual, BiBB Hydraulics - Basic Principles en Trainer‘s manual, BiBB Hydraulics - Basic Principles es Trainer‘s manual, Electrohydraulics de Trainer‘s manual, Electrohydraulics en Trainer‘s manual, Electrohydraulics es Trainer‘s manual, Mobile hydraulics de Trainer‘s manual, Project Manual Industrial Hydraulics de Trainer‘s manual, Project Manual Industrial Hydraulics en Trainer‘s manual, Project Manual Industrial Hydraulics es Trainer‘s manual, Project Manual Proportional Valve Technology de Trainer‘s manual, Project Manual Proportional Valve Technology en Trainer‘s manual, Project Manual Proportional Valve Technology es Trainer’s and trainee‘s manual Troubleshooting de Trainer’s and trainee‘s manual Troubleshooting en Trainer’s and trainee’s manual Troubleshooting es Troubleshooting, component set DW4.N Troubleshooting, component set DW4E.N U USB cable for Multihandy 3050/5050 L = 1.5 m V W WebTr@iner Electrohydraulics, single licence de, en, es WebTr@iner Hydraulics - basic principles single licence de, en, es WebTr@iner Proportional- and Regelhydraulik single licence de, en, es
Page 148 30 103 119 119 122 101 83 83 100 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 135 135 135 64 66 121
143 142 144
RE 00843/02.07
DS4
Hydraulics Bosch Rexroth AG 163/164
Index Wiper roll dispenser Writing surface set; LE2 Wörterbuch/Dictionary of Fluid Technology de, en, es, fr, it Z
Page 100 30 139
164/164 Bosch Rexroth AG Hydraulics
DS4
RE 00843/02.07
Notes
Bosch Rexroth AG Training & Didactic Maria-Theresien-Straße 23 97816 Lohr am Main, Germany Phone +49 9352 18-1041 Fax +49 9352 18-1040
[email protected] www.boschrexroth.de
© This document, as well as the data, specifications and other information set forth in it, are the exclusive property of Bosch Rexroth AG. It may not be reproduced or given to third parties without its consent. The data specified above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging. Copyrights, subject to revision. Printed in Germany
