Thiết kế cửa
Short Description
Descripción: Cừa xi măng...
Description
PARTS LIST NO. 50022698
LIST OF PARTS FOR Inspection door 500x600 Lining 139 mm Preheater
Version : 2.0
Name: R.Sridhar
17-SEP-07
Version : 4.0
Name: Bo Kenneth Bonderup
18-JAN-11
No.
50022698
Parts List Explanation This Parts List consists of pages in the following sequence: A) General Information Section: Cover - identifies the specific parts list number for a complete machine or modification to an existing one. Explanation - provides explanation of parts list structure. Information - identifies serial number, nameplates, manufacturing and shipping information. B) Index Section: General Assembly - identified general assembly drawing(s) associated with parts list. 00.00, Revision List - identifies parts list pages revised after initial release. 00.01, Section List - identifies all sections of the parts list, including index sections that are applicable. 00.02, Drawing List - identifies drawings necessary for the erection of equipment. 00.03, SPL List - identifies all Separate Parts Lists used within parts list. 00.04, Motor List - identifies motors applicable to this equipment. 00.05, Air and Water Requirements - identifies air and water requirements for this equipment. 00.06, Lubricants - identifies lubricants required for this equipment. 00.07, Supplied Spares - identifies spare components that are supplied with this equipment as part of the order. 00.08, Recommended Spare Parts - identifies spare parts recommended to be on hand for future use. 00.09, Instruments - identifies instruments applicable to this equipment. 00.10, Instructions - identifies instructions applicable to installation, operation and maintenance. Not all index sections are used on all parts lists. Index sections that do not apply will be identified as "NOT USED".
The following pages are the main element sheets with the actual contents of the parts list. C) Elements Listing Section: This part of the parts list specifies the position number, description, quantity, drawing numbers or Separate part lists numbers, supply code, designation code, manufacture data, pattern number, material and weight. The element sections may be assigned any identification number between 01.00 and 99.99. Element List - specifies information in the following sequence. Line Numbers - located in the left and right margins. These numbers are the "main key" to the parts list. Each number identifies a line of the parts list and corresponds to the last two digits of the eight digit position number shown on assembly drawings. The first two digits identify the section, the next two digits identify the sub-section, the next two digits identify the sheet, and the last two digits identify the line number of the parts list. Column 1: Description - provides a brief description of a component of the equipment. Column 2: No. Req. - provides the quantity of a component needed for the equipment. Column 3: Drawing - provides the drawing number or separate parts list number associated to the component described. Column 4: Code Dim. Manuf. (Pat) - provides the code for purchased parts, bolts, screws, fittings, etc. (see 7.000001) or designation of elements. The Dim provides numerical values which must be used corresponding to dimensions on a tabulated standard part drawing. The Manuf. specifies commercially available elements according to a specific trade name and model. The (Pat) identifies the pattern number for an element. Column 5: Mat. Code - states a material code of the material to be used for the element. The code refers to a material data sheet in the F.L.Smidth material list. Alternatively a specific material specification may be included on the drawing. If the two codes or specifications are different, this parts list specification shall be used. Column 6: Total - indicates total weight for the quantity of components listed. The weight is rounded up to a whole number. All units of measure are in millimeters (mm) unless specified otherwise.
No.
50022698
Information Concerning MANUFACTURE and SHIPMENT "Number Required" applies to one machine only
Weight of complete machine
176
kg
INSTRUCTION MANUALS for manufacture and shipment designations unless noted otherwise.
"Mat." Code refers to F.L.Smidth Standard material specifications No. SPECIAL TOOLS for manufacture Drawing No.
Used for drawing No.
520530
GENERAL WORKSHOP INSTRUCTION
12951
PACKING
19691
SHIPMENT
50.100.000
EQUIPMENT IDENTIFICATION MARKING
Nameplates, to be attached to machine Serial Number
Quantity
To be stamped Machine Type and Size
To be placed on
The explanatory text for the purchase part code number (consisting of four digits + dimension) is included in the document: "Code for Purchase Parts" No. 7.000001. x) in a column on parts list sheets indicates that there is a pertinent remark at the foot of the sheet. Open dimensions are specified on a drawing as a variable letter dimension. Specific order dimensions are contained in the parts list dimension column. DO NOT USE ANY PREVIOUSLY RECEIVED DOCUMENT, USE ONLY THE DOCUMENT RECEIVED WITH THE ORDER.
Inspection door 500x600
No.
50022698
Section:
Lining 139 mm Product code
Revision list Description
01
SPL LIST
02 03
Section number and sheet number
000
Sheet no:
00.00 01
Revision number & revision date
01
00.03
1 18-JAN-11
Inspection door 500x600 assembly
01.01.01
1 29-JAN-09
2 18-JAN-11
02
Inspection door 500x600 assembly
01.01.02
1 29-JAN-09
2 18-JAN-11
03
04
04
05
05
06
06
07
07
08
08
09
09
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
19
19
20
20
21
21
22
22
23
23
24
24
25
25
26
26
27
27 Sign
BKB
Date 18-JAN-11
Inspection door 500x600
50022698
No.
Section:
Lining 139 mm Product code
Section list Description
Section number
Number of sheets
000
Section Weight kg
00.01
Sheet no:
01
Release date
01
REVISION LIST
00.00
1
17-SEP-07
01
02
SECTION LIST
00.01
1
17-SEP-07
02
03
DRAWING LIST
00.02
1
17-SEP-07
03
04
SPL LIST
00.03
1
18-JAN-11
04
05
MOTOR LIST
00.04
NOT USED
17-SEP-07
05
06
AIR AND WATER REQUIREMENTS
00.05
NOT USED
17-SEP-07
06
07
LUBRICANTS
00.06
NOT USED
17-SEP-07
07
08
SUPPLIED SPARES
00.07
NOT USED
17-SEP-07
08
09
RECOMMENDED SPARE PARTS
00.08
NOT USED
17-SEP-07
10
INSTRUMENTS
00.09
NOT USED
17-SEP-07
11
INSTRUCTIONS
00.10
NOT USED
17-SEP-07
12
Inspection door 500x600 assembly
01.01
1 - 2
176
09 10 11
18-JAN-11
12
13
13
14
14
15
15
16
16
17
17
18
18
19
19
20
20
21
21
22
22
23
23 X) in SUPPLY denotes split supply
Original 1
Rev.
General Revision
Line
17-SEP-07
RSR
18-JAN-11
BKB
Date
Sign
Inspection door 500x600
No. 50022698
Section: 00.02
Lining 139 mm Product code
Drawing list Description
01
Inspection door assembly
000
Sheet no: 01
Drawing
Remarks
20040278
01.01.01.01
01
02
02
03
03
04
04
05
05
06
06
07
07
08
08
09
09
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
19
19
20
20
21
21
22
22
23
23 Original
Rev.
Line
17-SEP-07
RSR
Date
Sign
Inspection door 500x600
Section: 00.03
No. 50022698
Lining 139 mm Product code
SPL List Description
01
Cyclone preheater Clean-out
000
Drawing 5.574085
Sheet no:
01
REMARKS 01.01.01.10
01
02
02
03
03
04
04
05
05
06
06
07
07
08
08
09
09
10
10
11
11
12
12
13
13
14
14
15
15
16
16
17
17
18
18
19
19
20
20
21
21
22
22 23
23 Original 1
Rev.
General Revision
Line
17-SEP-07
RSR
18-JAN-11
BKB
Date
Sign
Inspection door 500x600
No.
Lining 139 mm Inspection door 500x600 assembly
Product code
Description
01
No. Req.
Inspection door assembly
50022698
Drawing Product No.
Section: 000
01.01 01
Sheet no.
Code Dim. Manuf. (Pat)
Mat Total code wgt kg
20040278
01
02
02
03
Frame
1
20041588 PN 2050022
1100/1 220
26
03
04
Door
1
20040183 PN 2050023
1100/1 220
57
04
05
05
06
06
07
07
08
08
09
09
10
Cyclone preheater Clean-out
1
11
Packing X)
1
12
Adhesive
1
5.574085 PN 413469
SPL
4
10
. Ø15×3000 . Type 4080
0
11
0
12
PN 2048594 . 0.2 Liter cartridges
X)
PN 2049850
13
13
14
Hinge
1
20040205 PN 2048628
1100
23
14
15
Hinge with handle
1
20040230 PN 2048629
1100
23
15
16
Clevis pin
3
4.061498 PN 470497
1100
9
16
17
Grub screw
3
0
17
0501. M6×10 PN 53037
18
18
19
Bracket
1
20044951 PN 2048631
1100
15
19
20
Suspension Hinge
1
2.242372 PN 470500
1100
17
20
21
21
22
Hexagon nut
23
Screw X) Line 11 : M.B. Cohn or similar 12 : Silicone, non-acetic acid type- RTV or similar
1 1
0100. M20
5
0
22
. M20×80
2100
0
23
PN 4225151 7.000035 PN 470982
Sign RSR 1 2 2
Rev.
Date 17-SEP-07
22 22 23 03 04 10 14 15 16 19 20
Line
Total
174
29-JAN-09
NNR
18-JAN-11
BKB
18-JAN-11
BKB
Date
Sign
Inspection door 500x600
No.
Lining 139 mm Inspection door 500x600 assembly
Product code
Description
No. Req.
01
Hexagon nut
02
Screw
1
03
Screw
2
04
Prevailing torque type hexagon thin nut
05
Washer
1
2 2
50022698
Drawing Product No.
Section: 000
01.01 02
Sheet no.
Code Dim. Manuf. (Pat)
Mat Total code wgt kg
0100. M20
5
0
01
. M20×60
2100
0
02
5.6
0
03
0151. M20
5
0
04
0700. M20
Steel
0
05
PN 4225151 7.000035 PN 470988
0221. M20×60 PN 4172 PN 15055 PN 991
06
06
07
Screw
08
Prevailing torque type hexagon thin nut
09
Washer
4 4 4
0221. M20×60
5.6
1
07
5
0
08
1100
0
09
PN 4172 0151. M20 PN 15055 4.218615 PN 470506
10
10
11
Screw
12
Nut
1 1
0221. M20×100
5.6
0
11
5
0
12
PN 68358 0111. M20 PN 574
13
13
14
Eye bolt
15
Washer
16
Hexagon nut
8 8 8
4.6
1
14
0700. M12
Steel
0
15
0100. M12
5
0
16
0605. M12×70 PN 4023341 PN 1674 PN 4225149
17
17
18
Hexagon head bolt
19
Prevailing torque type hexagon thin nut
8 8
0211. M12×50
5.6
0
18
5
0
19
PN 192488 0151. M12 PN 15056
20 21
20 Handle
7.000170
21
22
22
23
23 X) Line
Sign RSR 1 2 2
Rev.
Date 17-SEP-07
01 11 12 16 19 15 16 18 19 21 01 02 04 05 08 09 12 14
Line
Total
2
29-JAN-09
NNR
18-JAN-11
BKB
18-JAN-11
BKB
Date
Sign
View more...
Comments