The Volcano and the ultimati Manual Revised.pdf

Manual by Dipendra Pathak

Why should we buy Volcano Box? 1. Auto and Manual Detection of Chinese Mobile Pin Out ‐>> Volcano Box has inbuilt function to set mobile pin out Manual and auto. To do manual pin out, you must choose VCC, GND, D+/D‐ or VCC, GND, Rx and TX or like that manually. You can find Auto pin out from Detect tab or choosing tick on “Auto Detect Pinout” on MTK or Coolsand etc.

2. No Need to buy external power supply (Eagle Eye) ‐>> with the help of inbuilt function of Volcano (Eagle Eye), you can make mobile ON without battery i.e. you can use Volcano Main Cable (+) and (‐) as power supply.

3. Read‐Write, Reset, Unlock ZTE Mobiles ‐>> With Volcano Box, you can do that operation within few seconds.

4. Unlocking HTC popular model ‐>> With Volcano Box, you can do these operations within seconds that is supported by the Box.

5. Huawei Modems, Huawei U and G series Standalone Unlock 6. Resetting and Clearing Security Code 7. Read‐Write, Reset, Unlock Alcatel Mobiles ‐>> you can read, Write, flash, unlock, and removing security code with the help of Volcano Box.

8. Network unlock of Samsung Original mobile ‐>>With Volcano Box, you can do these operation standalone. That means no need Internet connection.

9. Read / Write / Reset CDMA ‐>>With Volcano Box, you can Unlock of CDMA set of Different Operators and; also; you can reset user locks.

10. Android ‐>> with the help of Volcano Box, you can read, write latest android Devices and makes backup flash file for future use.

11. Apple ‐>>With Volcano Box, You can take the detail information of iPhone Carrier.

12. Handy Tools Handy tools like File Compression, File Conversion, File Intercept, File Identification, File Combination, Search Password, Notebook, Calculator, and IMEI Generator are inbuilt feature in Volcano Box.

13. Standalone Operation ‐>> Volcano Box has Standalone function. No need internet Connection at all except iPhone Carrier information.

14. Online iPhone Unlocking ‐>> Furious team has own Online unlock server. You can unlock iPhone by Clicking “Unlock by IMEI” from Volcano Interface. For more detail, please visit link: http://oneunlock.com

Main Interface

Open the volcano Box, you will see the Main Menu on the Top, Mobile CUP Types details like MTK, SPD etc on the left, the main software Screen on the right side (The white part). Same as, we can see here Drag Tool (DCC, RX, TX, DTR, DTR, DST etc) and Drop part (01, 02, 03,

04 etc). When we select any Pinout manually then we drag VCC, GND, RX, TX, +D -D from Drag Tool and we drop it to the above where is written 01, 02, 03, 04 etc. (Drop Part). In Cable (drop-down) menu, we can see different jigs names that come with Volcano Box. Same as, On the Detect Type (drop-down) menu, we can see different CPU Names. From this both (Cable and Detect Type) drop Down Manu, we can find mobile Pin - out or definition. We can also find Mobile CPU type with the help of this drop down menu i.e. Cable Drop Down Manu and Detect Type Drop Down Manu.

Why Volcano Software not Opening (not showing its Interface)? There might be few reasons if the Volcano Software not opening. They are: 1. Volcano Box not connecting with A to B cable. 2. Box Driver Problem or Driver Conflict with Different Box. Uninstall FIDI drivers and try to install Box Driver. You can find the Volcano Box Driver on the following location: C:\Program Files\Volcano Team\VolcanoBox\Drivers\Box Drivers

You can also download Latest driver just clicking “Download Latest Drivers” on the main interface:

3. Power Button of Volcano Turning ON. It should be in OFF position.

4. Antivirus Problem. Turn off Antivirus and Try Again. 5. A debugger has been found running in your system?

If you are facing problem such as “Debugger has been found” and not opening the software, just uninstall the USB Network Sharing Software.

How to increase Volcano Box’s Pin finding Speed? (Some Mobiles are not booting from Volcano Box why?) Just guess why there is a Switch on the Box Hardware? Simple Answer is VOLCANO Box has made multiple interfaces to operate. Let us explain about it.

Switch off Position: Volcano Box uses USB Power from Computer Switch ON Position: Volcano Box doesn’t use Power from the USB of your Computer. This means you have to use external power adaptor for volcano box. Volcano Box requires 9 Volt 1 Ampere (9v 1Amp) Adaptor for it.

Some USB of the Personal Computer (PC) could not supply accurate voltage for volcano box so the pin-finding speed could not be fast. And if you use external power supply, then, Volcano Box consume total power from AC 9V (9V 1 Amp) Adaptor which will be enough than that the PC which is supplying power between Pen Drive, Data cards and Other Boxes. So there won’t be enough Power to the Volcano Box. When you use 9 Volt adaptors it doesn’t consume any Power from your PC and it runs smoothly and finds Pinout very fast.

It should be noted when we use 9 V. 1 amp Adaptor, then, the Switch of Volcano Box should be ON position.

File Manu In this “Menu” You will find EXIT Button in drop down list. This Button is used to EXIT the Program.

Config Under “Config” Manu you will Find 2 Options:

1. Cable Manager 2. Advanced Option

Cable Manager You can see the Cable List detail and cable pin out from the table as shown below. From this menu, you can directly set the mobile pin out if they are in the list. You can also Delete and rename the pin out from the menu.

Pinout Export: You can export listed pinout from Volcano Box to Other Boxes etc Pinout Import: You Can Import the Pinout of Other Source i.e. Box etc to Volcano Box Smart Set: To Set the Selected Pinout from the Blue Line Box Set the selected Cable: To set the Similar kinds of Pinout to Another Mobile Delete Pinout: Delete the Selected Pinout from the Drop – Down list of Blue color Box Rename Pinout: Rename the Selected Pin out from the Drop – Down list of Blue color Box

Advanced Option This Tab is related with Power Management of Mobile using the Volcano Box. As we know some mobile requires more power and some few. Volcano Box automatically supplies the required Voltage to the mobile that it is required by the mobile at the time of operation i.e. Flashing, IMEI repairing etc. Chinese Mobile normally needs 4.3 to 5.0 Voltages. The Default Option is Automatic exchange. This means when mobile needs less than 5.0 voltages, then it shifts to 4.3. And when it needs more power to the phone then it shifts to 5.0 . Is not this Wonderful idea!!! Sometimes, if there is necessary Fixed Certain Voltage, Advance user can fix this manually. For this you have to choose Fixed (Red Clip is Positive, black Clip is Negative).

Tool This Manu is related to Eagle Eye, Test Battery and Oscilloscope.

Eagle Eye (Eagle Eyes = power supply) Eagle Eye simply means "Power Supply" to the Device or Mobile. Eagle Eye has made to check the voltage of the device to confirm the device has software or hardware problem. Why volcano box has eagle eye? Because Volcano Box gives you "All in One In build Services” No need buy other tools like ABC and no need to buy power Supply. Volcano Box has in build power supply which is known as Eagle Eye. Volcano Box has used Good hardware i.e. ALTERA IC and Altera IC needs Stable Voltage from your Computer. Altera IC must have stable voltage. Even losing 0,0000001 voltage, Altera IC won't be stable. If your computer has no stable Voltage from USB (USB Power Supply), then, you must use 9 volt 1 Amp ADAPTOR with Volcano Box (This Adaptor does not include with Volcano Package because some device (Computer and Laptop) needs and other doesn't). If voltage does not stable then final result won't be perfect. So, better we suggest use EXTERNAL ADAPTOR for Volcano Box. The benefit of using 9 Volt Adaptor is that Volcano Box doesn't consume any power from your computer and pin finding Speed will be super fast. You can use Eagle Eye as you use external Power Supply as shown picture below:

How to make Volcano as Power Supply?

1. Open the Volcano Box Software 2. Now, go to Tool menu and Click on Eagle Eyes or You can just Press Eagle Eye on the TOP of the Volcano Software. 3. Now, Connect Phone with Volcano Box 4. Click on Collect Button 5. Now, Press & hold Power button of the mobile. Now your mobile will be ON (as you normally do with external Power Supply). Normally, mobile needs 130 to 150 mh Current to run or to open. If the current level is below of this level, Mobile should not ON. That means either mobile has either hardware or software problem.

How to I Know that Device has hardware (Short-circuit) or software problem? There are 3 ways to find out hardware or software problem from the Volcano Box. They are: A. Eagle Eyes 1. Open the Volcano Box Software 2. Then go to Tool menu and press Eagle Eyes or You can just Press Eagle Eye on the TOP of the Volcano Software. 3. Now, Connect Phone with Volcano Box 4. Click on Collect Button 5. After pressing Collect button, Ammeter (Eagle Eye) doesn't go right site or stay same place or location and shows an error "Failed to set collection-command Please try again", that means hardware problem. You can test it with Battery Cable (+) to (-) and (-) to (+). Check the Picture as shown below:

Normally, If the mobile has software problem, after pressing Collect button, the AMMETER’s Needle goes towards the right side and Current increases (3 ma) even not pressing on Mobile Power button as shown on the picture below:

If there is no short circuit, then, of course AMMETER’s Needle goes more right when you press mobile Power Button. B. Flash IC Damaged Where there is Flash IC Damaged, Other box like Dragon shows NOR and NAND Flash Chip Address as 00000000. In the case of Volcano Box, it shows error – “S_Da_Flash_Not_Found”as shown below:

For such a condition, first re-hot Flash Chip. Still, not work, then, rebel Flash IC or change the Flash IC. C. Completely Shorting When the Device (Mobile) becomes damaged with Water or electricity, the Volcano Box starts to beep when you connect the battery cable (Main Cable) of Volcano Box. Volcano Box has made anti-shocked technology; still we do not recommitment you to join the device or PCB continuously with Volcano Box. When you hear such a beep and confirm the shorting, please disconnect the device from the Box.

Oscilloscope Oscilloscope is electronic test instrument that allows observation of constantly varying signal voltages. Oscilloscopes are commonly used to observe the exact wave shape of an electrical signal. In addition to the amplitude of the signal, an oscilloscope can show distortion, the time between two events (such as pulse width, period, or rise time) and relative timing of two related signals. This Software Range is 0 to 20 MHZ * This device is used for signal Checking * Needs Special Cable which has a very sharp needle one side and female main cable place in another side (which is used to join with Volcano in the same place where we used to join Volcano Main cable.) * For this, we need black cable to the ground and connect needle where you want to check MHZ (Frequency). * Volcano can check 0 to 20 MHz Frequency.

Special Cable for Oscilloscope

System This menu is related to Reconnect and System Self Check.

1. Reconnect This Tab is related to connect the Box; if this is already disconnected.

2. System Self Check “System Self Check” is Self-doctor of volcano box. Is not this good idea to check your box yourself?

System Recovery: To check the volcano software if there is any problem and recovers it if there is any problem. How to check 1. Click on “System Recovery” 2. When software ask “Would you like to executive system recovery?” Click “OK” to run it. 3. Wait until the operation is completed. Check Motherboard: Volcano Box has two Boards inside the Box: They are: 1. Big Board and 2. Small Board. Big Board is known as Motherboard. “Check Motherboard” button checks the Motherboard if there is any Problem.

How to check 1. Click on “Motherboard Check” 2. Wait until the operation is completed.

Check As board: The Assiboard is the small Motherboard inside the Volcano box. “Check Assibard” checks the Small Motherboard if there is any problem.

How to check 1. Click on “Assiboard Check” 2. Wait until the operation is completed. Check Cable: Check cable check the cable if there is any short between cable pins 1 to 24 and it shows if there is any short between pins. Suppose pin number 5 and 6 are short each other then, it shows shot on the below Table which is showing 1, 2, 3 to 24. How to check 1. Click on “Check Cable” 2. Wait until the operation is completed.

Stop: This button stops the operation. Close: This button close the Program.

Help This tab is under construction.

Help Manual You will find this button on the left top of the main interface written as “Help Manual”. This button is related to the user manual where is written how to do this and that using Volcano Box. To get the manual, Just click on “Help Manual”. That’s all.

Search This Manu is related with Firmware of the mobile. When you press its sub-menu called "Flash File Search”, the browser leads you to GPG Industry Forum:

Here you can find the requested file, if there are any.

Advance / Simple form This tab is related to Volcano (Software) Screen Size. If you click on Simple form, then, the volcano Screen becomes Small size (as shown right side of the below) whereas if you click on Advance form, then, the Volcano (Software) Screen size becomes Bigger (as shown on the left side below :)

DETECT TAB Without Mobile Pin out, we cannot do anything like Flashing, IMEI Repairing etc. So, Detect Tab is most essential for GSM or CDMA mobiles. Simply we can say that Detect Tab is related to the Detection of Mobile Pinout.

How to Know the CPU - Chip info without Opening the Device (Mobile) Chinese Mobile has different kinds of CPUs like MTK, SPD, MSTAR, Coolsand, RDA, Infineon, AD, Sky, TI, Ankya, and more will come in coming days. So, in such a situation, it is very hard job to find the CPU Type without Opening the Mobile. Still, using the Volcano Box, You can find the CPU Type without opening the device: 1. Open the Volcano Main Software Interface. 2. Go to Detect Tab 3. Choose cable type: Auto Select Cable 4. Choose Detect Type: (RX/TX) Auto Detect CPU 5. Click on DETECT tab and 6. Press and hold Power button of the device (mobile) until volcano Detect CPU Type 7. After complete Detection, it shows the info as shown in the picture below: 8. Now, Click on "Set Pin out" so save the Detection Pin Out. 9. If there is already checked "After setting switches to platform", then software leads to platform that is detected by Volcano. If this is MTK CPU, then the Volcano Box opens MTK Platform, but if this is SPD platform, Volcano Box opens SPD Platform.

NOTE: Volcano software couldn’t open the New MTK Platform using this Tab because new MTK platform is detected from (+D/‐D Mstar) platform. So, even mobile MTK, Box opens MSTAR Platform. Better you do not tick "After setting switches to Platform" Sometimes Detect Method does not work because there are various new CPU Types in the market. So, you must open the mobile check the PCB for CPU Type. Why We use Select Mstar D+/D- Boot to find out pinout of MTK USB? Its Simple. In normal mode, volcano can only detect RX and Tx Pinout. Volcano cannot detect D+/D- Pinout from normal mood. To find USB (D+/D-), volcano has only option to use Mstar Boot (D+/D-).

What is RX/TX, D+/D- and USB method? When you open Device (phone) and solder wires to mobile PCB for operation (flashing, imei repairing etc) that is called “RX/TX method”. When you do operation without opening the Device (mobile) using Volcano main cable (Selecting (D+/D‐) Mstar) is known as D+/D‐ method. And, when you use mobile battery and cables like Nokia 5310, Motorola V3 USB etc Cables that is known as USB method. The picture shown in below is RX/TX method because wires are used to solder on the Device (Mobile) main PCB

The 2 ways RX‐TX Hardware Soldering Methods (Volcano)

The Two ways RX‐TX method are as follows: 1. Using RJ45 Cable for RX/TX + Volcano Main (cable + and – cable for Power) 2. Volcano Jig for RX/TX + Volcano main cable (+ and - cabole for Power) 1. Using RJ45 Cable for RX/TX + Volcano Main cable for Power You have to make Special RJ45 Cable for this operation or you can use infinity Universal Cable for this. The Pinout of RJ45 cable of Volcano Box is as follows:

Pin number 2 ‐ RX Pin number 3 ‐ TX Pin number 7 ‐ GND

2. Volcano Jig for RX/TX + Volcano main cable for Power You can use Volcano Universal Jig as RX and TX. The Pinout of Volcano Universal Jig is as follows: Number 1 ‐ RX Number 5 ‐ TX Volcano Negative power button (‐) ‐ GND

Note: Since Negative Power (‐) cable also works as Ground. So soldering GND cable is optional.

Which CPU works RX and TX Platform and which CPU USB (D+/D-) Platform? It is very difficult to tell because today the CPU which is running Rx and TX platform may be in future they might support USB or D+/D‐ platform. Still, according to our experience, simply we can say:

RX‐TX Platform: MTK, SPD, SPD 8800D, Ankya, Coolsand, RDX, Ti, AD, SKY, Agere, Infineon, Philips, SI4904, CDMA USB (D+/D‐) Platform: MTK, SPD, Ankya, Mstar, Coolsand, RDX CDMA USB Device, Common USB Device

Why we use (D+/D-) Mstar to find MTK USB Pin Out? New MTK Chips only work with USB Platform. Mstar chips also works with USB Platform. MTK chips has not separate boot for USB but Mstar chips has separate boots for USB work which MTK chips also supports so MTK chips works in MSTAR D+/D- (USB) Platform.

Why we need Manual Pin Finding? What should we do, if VCC not found while detecting? Sometimes we cannot find VCC but find GND, D+, D- from Detect Tab. In such a condition, we have to find VCC first. After finding VCC, we can use GND, D+, D- that was found from Detect Tab. What is Next? Now, you have manually Pinout, VCC, GND, D+ and D-. (How to find VCC, Please follow the manual below) Now, you can Pick up the VCC, GND, D+ and D- from Drag Tool and leave this to Drop Part. Check the picture:

How to find Charge Pin? To find charging pin is very important to get information of VCC. So, Charging pin means VCC pin finding process. To charge mobile it needs two pin. One is VCC and other is GND. To find Ground Pin there is no problem but VCC is difficult. Volcano Box does this work with the help of Ammeter (Eagle Eye) which is inbuilt feature of Volcano. Sometimes, Box can’t detect VCC and it shows VCC NULL, So, such a condition we need to find VCC of the respective mobile as mentioned below: 1. Go to DETECT Tab 2. If you are confirm about Cable Type, Choose this from drop down manu. Otherwise leave this as “Auto Select Cable” 3. Choose DETECT TYPE as “(OTHERS) Charge Pin” 4. Now, Click on “DETECT” tab. Now, you can see GND Pinout finds very fast. On this Picture you can See GND is in pin number 5 5. After this; you will see AMMETER (Eagle Eye) to find the VCC. VCC is that point where AMMETER shows high Current. 6. Now, if the AMMETER shows high current or it goes towards MORE RIGHT SIDE that is your VCC Point. If this is showing high Current, then Press “YES” otherwise Choose “NO”. In Our Picture, Pin Number 1 shows High Current 278 MA so this is our VCC. I have tried the entire pin but only one pin (Pin Number 1) showed High Current 278 MA so, this is Mobile “VCC” Pinout. Log File of Pin Finding is as follows:

Note: There won't be 2 or more VCC in One mobile. It should be only one. But, sometimes it has seen 2 VCC Pinout also. If two points shows high current then the high current is taken as

Mobile VCC. It is Noted that when you select VCC phone must show charging Line on the mobile Display.

What should I do when RX /TX point damage but have DP DM? What is this? DM DP= USB D+ DDM mean USB + and DP mean USB RX and TX works with COM (Not USB) For Example MTK can Connect RX and TX But Mstar works with USB so you must be connect with DM and DP on the PCB after it works but if you try to Connect MSTAR With RX and TX it won’t find the pin out . Some Mstar has Boot-\BOOT+ on the PCB, you can solder mobile on that Pinout.

To know more detail please visit the link: http://pinoutsguide.com/Slots/USB_pinout.shtml

How do they put the Jig Name? And how do I know this? Yes, they have put the jig name as meaningful. When someone burn then the parents put his name Sunday, When he born on Monday then, of course, MONDAY or like that… Same way, the Best Hardware Manufacturer GPG Industry put its name with meaningful. Check this jig picture:

The Jig has written P-05B. This means, this jig has 5 pin so this is used for 5 pin mobile socket type. Same as P-07 --------- means this jig has 7 pin P-04A ------- means this jig has 4 pin

P-30B ------- means this jig has 30 pin and like that.

How to work Tab or iPhone (high copy) which has battery inside like original iPhone?

Please follow the tutorials:

1. Open the iPhone, Tab or such kind of device which battery is attached inside to the Device (Mobile) 2. Now, de-solder the battery from the device (mobile) 3. Solder the Volcano Power Cable + and - wire to the point where the battery has just taken out. Cable + line to Battery + line and Cable - line to Battery - line 4. Now, use one of the jig with Main Cable of Volcano or Use DP/DM or RX/TX with Volcano Box's Universal Jig. 5. Find out the CPU and do the operation whatever you like. Good Luck!!!

Is there any method to detect CPU if we are sure about this? Especially, there are some rules for detection which we do not want to keep secret to the volcano users:

A. MTK CPU 1. MTK (RX/TX) If you are sure that the CPU is MTK then you can directly select “(RX/TX) MTK CPU” from Detect Type. You can also specify Cable Type from Cable drop down list. Check the picture below: 1. Open the Volcano Main Software. 2. Go to Detect Tab 3. Choose cable type: Auto Select Cable 4. Choose Detect Type: (RX/TX) MTK CPU 5. Click on DETECT tab and wait until volcano detects the CPU 6. After complete Detection, it shows the info as shown in the picture below. 7. Now, Click on "Set Pin out" so save the Detected Pinout. 8. If there is already checked "After setting switches to platform", then software leads to platform that is detected by Volcano. If this is case of MTK CPU, then, the Volcano Box opens MTK Platform directly. Note: Check the picture below. The Jig name P04A that means this Jig has 4 pin and also notice Cable type E034 (4P) Earphone (Four Section). 4P means 4 pins jig. So, we use the 4A jig so we manually select 4P jig from the CABLE drop down list.

2. MTK (USB Method)

If you are sure that the CPU is MTK USB then you can directly select (D+/D‐) MSTAR from Detect Type. You can also specify Cable Type from Cable drop down list if you know about this otherwise leave it as “Auto Select Cable” 1. Open the Volcano Main Software Interface. 2. Go to Detect Tab 3. Choose cable type: Auto Select Cable 4. Choose Detect Type: (D+/D‐) MSTAR 5. Click on DETECT tab and wait until volcano detected the CPU Type 6. After complete Detection, it shows the info as shown in the picture below. 7. Now, Click on "Set Pin out" so save the Detection Pin Out. 8. If there is already checked "After setting switches to platform", then software leads to Mstar platform. Better you do not check “After setting switches to platform” in case of MTK USB.

B. SPD / Anyka We can do SPD / Ankya mobile 2 ways detection: 1. Using RX/TX and 2. USB (D+/D-) 1. SPD (RX and TX) If you are sure that the CPU is SPD then you can also do with (RX/TX) SPD/Ankya from Detect Type. You can also specify Cable Type from Cable drop down list if you know about this otherwise leave it as “Auto Select Cable” 1. Open the Volcano Main Software Interface. 2. Go to Detect Tab 3. Choose cable type: Auto Select Cable 4. Choose Detect Type: (RX/TX) SPD CPU 5. Click on DETECT tab 6. Press and hold power button of the device and wait until volcano detected the CPU Type. 7. After complete Detection, it shows the info as shown in the picture below. 8. Now, Click on "Set Pin out" so save the Detection Pin Out. 9. If there is already checked "After setting switches to platform", then software leads to the Platform that is detected by Volcano. This is the case of SPD CPU, then, the Volcano Box opens

SPD Platform directly.

2. SPD (D+/D- i.e. USB) If you are sure that the CPU is SPD then you can directly select (D+/D-) SPD/Ankya from Detect Type. You can also specify Cable Type from Cable drop down list if you know about this otherwise leave it as “Auto Select Cable” 1. Open the Volcano Main Software Interface. 2. Go to Detect Tab 3. Choose cable type: Auto Select Cable 4. Choose Detect Type: (D+/D-) SPD/Ankya 5. Click on DETECT tab and wait until volcano Detect the CPU 6. After complete Detection, it shows the info as shown in the picture below: 7. Now, Click on "Set Pinout" to save the Detected Pinout. 8. If there is already checked "After setting switches to platform", then software leads to SPD platform.

C. MSTAR If you are sure that the CPU is Mstar or MTK USB then you can directly select (D+/D-) MSTAR from Detect Type. You can also specify Cable Type from Cable drop down list if you know about this otherwise leave it as “Auto Select Cable” 1. Open the Volcano Main Software Interface. 2. Go to Detect Tab 3. Choose cable type: Auto Select Cable 4. Choose Detect Type: (D+/D-) MSTAR 5. Click on DETECT tab and wait until volcano detected the CPU Type. 6. After complete Detection, it shows the info as shown in the picture below. 7. Now, Click on "Set Pin out" to save the Detected Pinout. 8. If there is already checked "After setting switches to platform", then software leads to Mstar platform.

D. CoolSand and RDA Coolsand and RDA CPU detect from (D+/D-) MSTAR method and RX/TX MethodSo, 1. Coolsand and RDA (RX/TX) You can do Coolsand and RDA CPU directly selecting (RX/TX) Coolsand CPU from Detect Type. You can also specify Cable Type from Cable drop down list if you know about this otherwise leave it as “Auto Select Cable”

1. Open the Volcano Main Software Interface. 2. Go to Detect Tab 3. Choose cable type: Auto Select Cable 4. Choose Detect Type: (RX/TX) Coolsand CPU 5. Click on DETECT tab 6. Hold the Power Button until software detects mobile's pin-out 7. After complete Detection, it shows the info as shown in the picture below. 8. Now, Click on "Set Pin out" to save the Detected Pinout.

2. Coolsand and RDA (D+/D-) MSTAR If you are sure that the CPU is Coolsand and RDA, then, you can also select (D+/D-) MSTAR from Detect Type. You can also specify Cable Type from Cable drop down list if you know about this otherwise leave it as “Auto Select Cable” 1. Open the Volcano Main Software Interface. 2. Go to Detect Tab 3. Choose cable type: Auto Select Cable

4. Choose Detect Type: (D+/D-) MSTAR 5. Click on DETECT tab and wait until volcano detects the CPU Type. 6. After complete Detection, it shows the info as shown in the picture below: 7. Now, Click on "Set Pin out" to save the Detected Pinout.

E. QUALCOMM (CDMA) We can Detect QUALCOMM models from USB mood using following ways: 1. Open the Volcano Software in "DETECT" interface (Tab) 2. Choose "(D+/D-)Common USB devices" Or Choose "(D+/D-)CDMA USB devices" 3. Click on "Detect" button 4. When Volcano Software ask you "For many phones, charge pins need to be set in order to identify USB devices or detection will fail. It is recommended that you set charge pins in (Pinout) first, and then starts detection. Continue detecting? Yes/No" Click on "Yes"

5. Wait operation is completed. 7. Click on "Set Pin-out" That’s All For more, please visit the link: http://www.youtube.com/watch?v=67hZIlpcjPQ

F. Android

Normally, MTK and SPD have Android Operating System in the market. The Detection method is almost same of other Chinese USB (D+/D‐) method. You must follow the points if you want to find Pinout correctly: 1. Open the Volcano Software in ''DETECT" tab 2. Choose Detect Type as "(D+/D‐) SPD/Ankya" if the mobile is SPD Android or Choose Detect Type as "(D+/D‐) Mstar" if the mobile is MTK or Mstar Android

3. Click on Boot Key, if necessary. Normally Boot key might be Call Button, Call Button + Home Button etc. 4. Click on "Detect" button and wait until the detection is completed.

5. Click on "Clear Pinout" first 6. Choose the Same Pinouts from Above 7. Click on "Set Pinout" That’s All.

How could I know my phone is MTK and Mstar? If you see in log at the time of Detection New USB device: (VID_0E8D&PID_0003) This mean you have MTK Phone (or could be Coolsand it’s not Mstar phone) If you see in log this Found [MSTAR] USB device: GCREADER USB Device, (VID_1B20&PID_0300) This means you have MSTAR phone

VCC and GND is Null, what should I do? MTK USB and Mstar Not detected from Detect Tab?

Karbonn K9 cannot detect by Volcano and is showed as shown in the Picture above. Do the following tasks. 100% works 1. Check the Volcano Main Cable or jig first. 2. Install the Device (Phone) Driver 3. Go to “DETECT” Tab if you know Cable Type, Choose this. Otherwise leave this as “Auto Select Cable”

4. Choose DETECT TYPE as (OTHERS) Charge Pin 5. Click DETECT Button 6. When Arrow (AMMETER i.e. Eagle Eyes) goes towards more right side, then, Click “YES” and “Cancel” respectively. 7. Again, Stay DETECT Tab and 8. Choose “Auto Select Cable” 9. Choose Detect Type as “(D+/D‐) Mstar” 10. Click on “Detect” Button

That’s all

How to make Any UART & Ignition CABLE with the Help of Volcano Box? You can make any UART Cable or any Ignition cable for Samsung, LG etc. with the help of Volcano Box. Volcano Box gives required resistance value and helps to make two cables short from the software. You can short any pin to Ground by the function of the Volcano Box. For example, you need to make Samsung C3303K Uart cable. Check the Original cable of C3303K Uart that is available to buy in the market.

This Picture clearly tells that the Original Cable of C3303K has 5 pins: 1-VCC 2-RX 3-TX

4- Pin 4 shorts with pin 5 with 510k Resistor 5- GND Now, we will make same Cable with the help of the Volcano Box function like this:

As Original Cable, Pin number 1 is VCC so we Pick up VCC to 01 pin, Pin number 2 is RX in original Cable, so we pick up RX and drop down to 02 Pin, Pin number 5 is GND in the Original Cable, so we Drag GND to 05, Pin number 4 is short with Pin number 5 with 510k Resistance in the original cable, so we Drag REA to 04, and REB to 05. Because REA and REB has Specific Resistance Value (In this Case 510K) between Pin 4 and Pin 5. NOTE: If you want to do direct Short, then, you must use SEA and SEB instead of REA and REB. To say more clearly, 1. 2. 3. 4. 5. 6. 7. 8.

Drag and Drop VCC to pin number 1 Drag and Drop RX to pin number 2 Drag and Drop TX to pin number 3 Drag and Drop REA to pin number 4 Drag and Drop GND to pin number 5 Drag and Drop REB to pin number 5 Set Resistance Value 510K Click on set Pinout

Now, you are ready to flash or unlock with other box that is used this Pinout with Volcano Box.

In this picture, we can see S5610 Read Info done by Z3X Samsung Box with the help of Volcano Uart Cable :)) How to do this? 1. Volcano Box Com Port is other software Com Port. So, if the Volcano Box com Port is 53, then, the Z3X Box Com Port must be 53. If the Volcano Box using Device Com Port, then, the Z3X COM Port must be Device COM Port. 2. Let, the Join Volcano Box with the Computer but do not connect Main Cable to the volcano Box yet. (Remember your mobile must connect with the Main Cable and the Cable not connecting with the Volcano Box yet.) 3. Click on “Read Info” from Z3X Box 4. When the Z3X software ask you to connect the Cable, then, Connect Volcano Main Cable with the Volcano Box. 5. Press and hold Power Button of the Mobile for few seconds. 6. Wait until Operation is completed. That’s All. This is an example of Samsung C3303K cable... you can make any other cable such as Samsung S7070, Samsung i9250 etc... No need to buy more cables if you have Volcano box in your Service Center.

IMEI Function

Changing IMEI is illegal in Some Countries so Volcano Team won’t be responsible for this. But, they have healped you to hide this function…...I think you understand .

Where is IMEI Function in Volcano Interface? Follow the steps to bring back IMEI function on the volcano interface: 1. Open the Volcano Box Software interface 2. Press CTRL + ALT + I together or Click on the IMEI Button as shown below:

3. Press "Yes"

That's All.

How to Choose Valid IMEI? You can choose any numeric 15 digital numbers for IMEI changing. But, the IMEI must be international standard i.e. the valid IMEI must have TAC (6 character), FAC (2 Character), SNR (6 Character) and SP (1 Character). Do not worry. Volcano Box does this for you :) 1. Choose “Tool” Tab

2. Click on "IMEI Generator”. Now, you will see New Windows for IMEI Generator. 3. Just Click “Generate” tab, you will get 15 digits Valid IMEI.

That's All

What should I do if there is no network after formatting the mobile? There is two ways to Network of Chinese Mobile. They are: 1. Write IMEI 2. Restoring NV file Let's discuss about those topics.

How to Change IMEI of MTK CPU? There are two methods to change IMEI in MTK Mobile. 1 AT Mode 2. Live (Meta) IMEI Mode

1. AT Mode We can change IMEI 3 ways in AT mode. A. IMEI Change with At Mode (RX/TX- using Volcano Box Port) At Mode is the mode where you can change IMEI while mobile is restarting condition or ON/Off Condition by the software problem. You can’t write more than 2 IMEI in AT mode. 1. Open Volcano Software in MTK interface. 2. Tick "Write IMEI"

3. Tick "Auto Detect Pinout" 4. Connect Mobile with Volcano Box with its main cable and jig 5. Click on “RUN” 6. Press and hold Power Button of your Mobile until the pinout detection

7. Choose COM Port (Volcano Box default COM Port using Main Cable) 7. Fill Desired IMEI. You must check on ACTIVE button if you want to write second IMEI also. (Note: Max 2 IMEI can be written in AT mode) 8. Click on "Write IMEI (W)" 9. Now, press and hold the Power Button until software detects mobile's pin-out That's All B. IMEI Change with At Mode (RX/TX- using Mobile USB Port) 1. Power on Mobile with Battery. 2. Insert USB cable between mobile and compute. 3. Mobile shows you two Option a. Mass Storage b. COM port. Choose “COM port” from your device's (Mobile's) Display. 4. Now, computer install required drives (MTK USB driver) and makes separate COM Port for this mobile. (In my case Computer has made Port 59 for this MTK device) 5. Now, Open Volcano Box MTK interface. 6. Un‐tick "Auto Detect Pinout" and Click RUN button. 7. Now, New Windows opens for IMEI function. 8. Select the “MTK COM Port” that is made by the Mobile which is the mobile COM Port. (For this, check DEVICE MANAGER of your computer (In my case it is Port 59))

9. Fill Desired 15 digit IMEI number. You must check on ACTIVE button if you want to write second IMEI also. (Note: Max 2 IMEI can be written in AT mode) 10. Click on "Write IMEI (W)" 11. Now, press and hold the Power Button until software detects mobile's pin-out.

That's All C. IMEI Change with At Mode (using Original USB cable) At Mode is the mode where you can change IMEI when there is mobile restarting condition or mobile is off by software problem. You can’t write more than 2 IMEI in AT mode.

1. Open Volcano Software in MTK interface. 2. Tick "Write IMEI" 3. Un-tick "Auto Detect Pinout" 4. Connect Mobile with Volcano Box with its main cable and jig

5. Click on “RUN” 6. Press and hold Power Button for few seconds. 7. Choose USB (Volcano Box Main Cable) 8. Fill Desired 15 digit IMEI number. You must check on ACTIVE button if you want to write second IMEI also. (Note: Max 2 IMEI can be written in AT mode) 9. Click on "Write IMEI (W)" 10. Now, Press and hold the Power Button for few seconds. That's All

2. MTK Live(Meta) Write IMEI Live or Meta mode is that mode where mobile must be ON or Live. In this Mode, you cannot repair or write IMEI to the device which is restarting or dead condition. In Meta mood, You can change imei 4 ways as mentioned below: A. With Box Com Port (Pinout Detecting by Box) 1. Open Volcano Software in MTK interface.

2. Tick "Auto‐detect Pinout" 3. Tick "IMEI Tool" 4. Click "Run" 5. Press Mobile Power Button continuous. After pin‐finding of the Mobile, another IMEI Box opens as shown below:

6. Click on "Start" button and Press Mobile Power Button continuous and wait until Uploading Image stop. 7. Choose Box Default Com Port (My Volcano Box is Running in COM number 4) 8. Choose Mode 1 or Mode 2 (Mode 1 or 2 depends according to the CPU of the device) 9. Write the desire IMEI 10. Click on "Change IMEI" That's All.

B. With Box Default COM Port (Without Detecting Pinout) 1. Open Volcano Software in MTK interface. 2. Un‐tick "Auto‐detect Pinout"

3. Tick "IMEI Tool" 4. Click "Run". Now, new windows for IMEI open 6. Click on "Start" button and Press Mobile Power Button Continuous and wait until the Uploading Image bar stops. 7. Choose Box default COM PORT (My Volcano Box is running in COM number 4) 8. Choose Mode 1 or Mode 2 (Mode 1 or 2 depends according to the CPU of the device) 9. Write the desire IMEI 10. Click on "Change IMEI" That's All NOTE: Volcano Mode 2 IMEI methods are unique method which can not be copied by other team till yet. I have done two mobile with this Method: A. Karbonn K25i and B. Yxtel E‐198. Only Volcano Box can repair this kind of mobile, other box only claims to do so but they are not Succeed. C. with Detection + Live (Meta) IMEI Method + using Volcano COM Port 1. Open the volcano software 2. Go to “Detect” Tab 3. Choose Cable type "Auto Select cable" and Detect type "(RX/TX) MTK CPU" 4. Click on "DETECT".

5. After finding Pinout, click on "set Pinout" 6. Now, go to MTK Platform and un-tick "Auto-detect Pinout" 7. Check "IMEI Tool" 8. Click "Run". Now, new window for IMEI opens 9. Click on "Start" button and Press Mobile Power Button Continuous and wait until the uploading Image stops.

10. Choose Box Default COM Port (My Volcano Box is running in COM number 4) 11 Choose Mode 1 or Mode 2 (Mode 1 or 2 depends according to the CPU of the device) 12. Write the desire IMEI 13. Click on "Change IMEI" That's All D. with Detection + Live (Meta) IMEI Method + Boot Key + using Mobile COM Port 1. Open the volcano software 2. Go to “Detect” Tab

3. Choose Cable type "Auto Select cable" and Detect type "(RX/TX) MTK CPU" 4. Press Boot Key (2+5 in my case. This is 6252 MTK and Mobile is G’Five U505) 5. Click on "DETECT".

6. After finding Pinout, click on "set Pinout"

7. Now, go to MTK Platform and un-tick "Auto-detect Pinout" 8. Check "IMEI Tool" 9. Click "Run". Now, you will see new windows for IMEI opens. 10. Click on "Start" button 11. Now, press and hold Mobile Power Button Continuous and wait until the Uploading Image stops. 12. Choose MOBILE COM PORT (In My Case this mobile is detected In COM 19) 13 Choose Mode 1 or Mode 2 (Mode 1 or 2 depends according to the CPU of the device) 14. Write the desire IMEI and Click on "Change IMEI"

That's All

MTK 1.01 Platform MTK 1.01 is new platform for MTK mobile. We will describe detail about this later. Here we are going to discuss about IMEI function so we are continue to this topic. Some new mobile are coming in the market like Zen, Lava, Micromax etc which has 6252 CPU and they have IMEI start from 9111. We can't write Original IMEI of such mobiles which IMEI starts from 9111 except MTK 1.01 Platform. 1. Open the mobile with Battery. 2. Connect with USB Cable mobile to computer. 3. Notice that mobile will show two options: 1. Mass Storage and 2. COM Port. Now, Choose COM Port. 4. Computer makes COM port for this mobile. Which COM Port that mobile has taken will found from Device Manager of your computer.

5. Open the volcano software 6. Click on MTK NEW V1.01 7. Choose MOBILE COM PORT that mobile has taken. (In my case it has taken COM 29) 8. Choose the Phone Brand and Phone Model 9. Choose the IMEI that you want to write one by one i.e. IMEI1 or IMEI2 or IMEI3 or IMEI4. Note: You can write 1 IMEI in one time on this Platform. 10. Choose the Original IMEI from Battery Housing and click on "Write IMEI AT Mode" That's All

How to change IMEI of SPD CPU The IMEI of SPD CPU can be also changed two ways: 1. SPD Interface 2. Detect Tab (D+/D+)SPD/Ankya

1. SPD Interface From the SPD interface, you can change IMEI following ways: 1. Open Volcano Software SPD Interface (tab) 2. Hold Ctrl + Alt + I for IMEI function and click on "OK" 3. Tick on "Write IMEI" 4. Connect the Mobile with Volcano Main Cable 5. Select Boot File according to SPD Mobile CPU from “Boot” Drop‐Down List. Normally, we choose Built‐In Boot_01 (6600Lx Series) USB/ COM. check the picture, we have chosen as Built‐in Boot_03 (6800h) in case of the 6800h CPU.

NOTE: if you want to change IMEI 6800, 660D, 6530, then, you need to change the “BOOT” as shown in the Picture above and other rules are sames as describes here. 6. Select Auto‐detect Pinout Type as “Com (RX/TX)”

NOTE: In Case your mobile is 8800D; then; you have to choose “COM (RX/TX)” 8800D as shown below:

7. Choose R/W IMEI as COM 8. Click “RUN” Button 9. Fill the Desired IMEI. (If you want to write second IMEI, then, you have to tick ACTIVE to the second one also.) 10. Click on Write IMEI 11. Press and hold the Power Button for few seconds.

That's All For More, Check the Video also: http://www.youtube.com/watch?v=rArioibaV4Y

2. Detect Tab (D+/D+) SPD/Ankya 1. Open Volcano Software interface (Tab) 2. Go to “Detect” Tab 3. Select Detect Type as "(D+/D‐) SPD/Ankya" 4. Click on “DETECT” button

5. After you see pin-out, now Click on "Clear Pinout”

6. Again, Set the Same Pin-Out Manually (Pin-Out from Step 4) (Drag the “Drag Tool” i.e. VCC, GND, +D, -D and Drop it to “Drop Place”.)

(Note: Most Mobile no have VCC at the time of detection so it is not important. But, you must mention D+, D- and GND here. If the Detection from Number 4 option shows VCC then, you can also use VCC.) 7. Click on "Set Pinout" 8. Go to SPD Interface (Tab)

9. Un‐tick auto‐detect Pinout 10. R/W imei chooses “COM” Note: You must choose COM port to open Uart Port. Do not confuse this point. 11. To enable IMEI Function in the Volcano Software, Press CTRL + ALT + I from your Computer Keyboard and click "YES") 12. Tick on "Write IMEI" button 13. Click on "RUN" Now, you can see New Windows opens For IMEI Option.

14. Choose USB port (Notice: we have selected COM Port above and, here, we are going to choose USB port to write IMEI. Without opening Uart IMEI Port, we could not Write IMEI. So, to Open Uart Port, We choose COM port first, and secondly, we choose USB port to write IMEI) 15. Now, disconnect the mobile with Computer (Disconnect with Power cable and disconnect with Jig) 16. Fill the IMEI on the Box. 17. Click on “WRITE IMEI” 18. Connect Jig to the mobile, then, connect the power cable (Positive and Negative Cable with Volcano Main Cable) to phone 19. Press and hold the Power Button until software detects mobile's pin-out and starts boot downloading That’s All. Check the Video if you are still not understand: http://www.youtube.com/watch?feature=player_embedded&v=UtGzr3JgVMA

NOTE: With the help of USB Method (D+/D‐) you can change 3 IMEI and with the help of RX/TX method you can change 4 IMEI of SPD CPU.

How to change IMEI of Mstar CPU IMEI of Mstar CPU can be changed two ways as described below: 1. With USB Cable 2. With Detection (D+/D-)Mstar

1. With USB Cable Follow the method to change the IMEI of Mstar CPU with the help of USB Cable: 1. Power ON the mobile with SIM Card and Battery. 2. Insert USB cable 3. Phone will popup few options. Select “Modem/PC” from Phone 4. Computer install the requires driver for this mobile and makes separate port for this mobile. 5 Open the Volcano Software and go to “Mstar” Tab 6. Press ALT+CTRL+I from Computer Keyboard to Visible IMEI Function and click on “OK” 7. Tick on “WRITE IMEI” 8. Un-tick “Auto Detect Pinout”

9. Choose Mobile Digonostic Port (Not Box Port) 10. Click “RUN” 9. Write Desire 15 Digit IMEI on the IMEI Box 10. Again, Select Mobile Digonostic Port (Not Volcano Box Port) 11. Click on Write IMEI.

That’s All. To see detail, please check the Video: http://www.forum.shaarpmind.com/showthread.php/270275-Mstar-IMEI-Changing-Via-usbCable

2. With Detection (D+/D-) Mstar Follow the method to change the IMEI of Mstar CPU: 1. Open the volcano software 2. Go to “Detect” Tab 3. Choose Cable type "Auto Select cable" and Detect type as "(D+/D-) Mstar" 4. Click on "DETECT".

5. After finding Pinout, click on "set Pinout" 6. Now, go to MSTAR Platform and un-tick "Auto-detect Pinout" 7. Press Ctrl + Alt + I to enable IMEI Option in Volcano and click “OK” 7. Tick “WRITE IMEI” 8. Un-tick “Auto Detect Pinout” 9. Choose Mobile Digonostic Port (Not Box Port) 10. Click “RUN” 9. Write Desire 15 Digit IMEI on The IMEI Box 10- Again, Select Mobile Digonostic Port (Not Volcano Box Port) 11. Click on “Write IMEI”.

That’s All To know more, please check the video: http://www.youtube.com/watch?v=BkswsJ63eyg

How to write IMEI in Coolsand CPU You can Write IMEI RX and TX method in Coolsand CPU. 1. Open the Volcano Software in Coolsand Interface (Tab) 2. Hold Ctrl + Alt + I from Keyboard of the computer to show the hidden IMEI Function and click on "Yes" 3. Choose Boot Type as “Built-in BOOT_B” NOTE: if Boot Type “Built-in BOOT_B” not work for you then you have to choose Boot Type as “Built-in Auto” 4. Tick "Write IMEI”

5. Tick "Auto Detect Pinout" 6. Choose File Type from drop down list 7. Fill the IMEI Box as shown in the picture below:

7. Click "Run" 8. Press and hold the Power Button until software detects mobile's pin-out and starts boot downloading. That's All

How to write IMEI in Android CPU Normally we find two kinds of android CPU these days. They are:

1. MTK Android 2. SPD Android IMEI of MTK (Android) When there is a problem in IMEI of Android, you can see the screen like below:

We use USB method to change the IMEI in MTK Android. Just follow the following steps: 1. Power On mobile with Sim Card and Battery. Go to USB Dubbing Option of the mobile and Tick it. (Be sure Flight Mode is OFF).

(Note: when you tick USB Debugging, it will work from ADB.) 2. Insert the USB Cable between mobile and the computer and let the computer install required drivers for that mobile which is connected with the USB Cable. 3. Go to “MTK Tab” and un‐tick "Auto‐detect Pinout" 4. Tick “Android Tool” 5. Click “Run” Tab. Now, you will see ANDROID MTK IMEI REPAIR Tool. 6. Fill the Desire IMEI Numbers. 7. Click on “Write IMEI” button Now, you will see a box with message “Make Sure Phone Have Sim Inserted and Flight Mode Is Off, Press OK to Continue” 8. Click “OK” to confirm.

9. Wait until the operation is completed. That's All.

IMEI of SPD (Android) 1. Open Volcano Software interface (Tab) 2. Go to “Detect” Tab 3. Select Detect Type as "(D+/D‐) SPD/Ankya" 4. Click on “DETECT” button

5. After you see pin-out, now Click on "Clear Pinout”

6. Again, Set the Same Pin-Out Manually (Pin-Out from Step 4) (Drag the Drag Tool VCC, GND, +D, -D and Drop it to Drop Place.)

(Note: Most Mobile no have VCC detection so it is not important. But, you must mention D+, Dand GND here.) 7. Click on "Set Pinout" 8. Go to “SPD” Interface (Tab)

9. UN‐tick “auto‐detect Pinout” 10. R/W imei chooses COM Port (Note: You must choose COM port to open Uart Port. Do not confuse it here.) 11. To enable IMEI Function in the Volcano Software, Press CTRL + ALT + I from leyboard of the computer and Click "YES") 12. Tick on "Write IMEI" button 13. Click on "RUN" (Now, you can see New windows for IMEI Option here.) 14. Choose “USB” port (Notice: we have selected COM Port above and, here, we are going to choose USB port to write IMEI. Without opening Uart IMEI Port, we could not Write IMEI. So, to Open Uart Port, We choose COM port first, and secondly, we choose USB port to write IMEI) 15. Now, disconnect the mobile from computer (Disconnect from Power cable and disconnect from Jig) 16. Fill the IMEI on the Box. 17. Click on WRITE IMEI 18. Connect Jig to the mobile, then, connect the power cable (Positive and Negative Cable with Volcano Main Cable) to the phone 19. Press and hold the Power Button for a few seconds. That’s All. Check the Video if you are still not understand: http://www.youtube.com/watch?feature=player_embedded&v=UtGzr3JgVMA

Security Code (Password) Chinese Mobile has deterrent CPU like MTK, SPD, Ankya etc. and those CPU needs different types of software to find security codes of the device (Mobile). Sometimes Software can not find exact Security Code (Password) because users give wrong codes too many times and the user blames to the Software. This is not fault of Software but mistake of users using more times wrong Security Code. And, Software counts the code which is used more time (Security Code). Suppose, if you try to unlock security code 50 times as 12345 which is wrong, now box try to tell you security code as 12345 because the devices records (mobile) this more times and the software also finds it same as device i.e. mobile. If you bring the device after few try say 5 times, Volcano box can help to find accurate but if they brings after trying 1000 times then....then what, get new flash from file site or from the working mobile. To find the Security Code Mobile should be Meta Mode i.e.Live Condition (Working Condition). It should not be Restart Condition, and not dead condition. Anyway, let’s starts from MTK CPU.

How to Find Security Code in MTK CPU? We can find the security Code many ways. Normally we can find 7 ways in MTK CPU. If step 1 not works, then, please try Step 2, Step2 not works, then, Step three and so on: Step 1 – FORMAT Format Your Mobile using Volcano box. Is there Still Security Code? If yes, then go to step 2 Warning: Backup NV file before formatting MTK CPU. You can backup NV file from “General Para” Option. Sometimes, IMEI corrupts, then, you have to repair as we have described above. Step 2-MTK RX/TX CPU 1. Open MTK Tab 2 Tick "Unlock Code" 3. Tick “Auto Detect Pinout” 4. Click “Run” button 5. Hold Power Button of Mobile 6. Click Start button 7. Press and hold power button of mobile until the animation line start on the below of this windows 8. Click on "Clear Phone-lock"

That's All

Step 3-USB MTK CPU 1. Go to “Detect” Tab 2. Choose Cable as "Auto Detect Cable" 3. Choose detect type as "(D+/D-) MSTAR" 4. Click “DETECT” button

5. After detection is completed, go to MTK interface and un-tick "Auto Detect Pinout" 6. Choose Mobile using Port from Port Refresh 7. Tick "Unlock Code" 8. Click on “RUN” button

That's All. Step 4-Reading Flash File You can also find password after reading flash file. 1. Go to MTK interface (Tab) 2. Un-tick "Auto Detect Pinout" 3. Tick "Read Flash" 4. Click on “RUN” button 5. Press and hold Power Button of the mobile for few seconds. 6. Save file (Note: save file also known as Backup Flash File) 7. Notice the Security Code after finishing the Flash File. (Here Volcano has found: 1122 code)

That's All. Step 5-Analyze Code 1. Backup full Flash File

2. Open the “MTK” Tab (Interface) 3. Un-tick "Auto Detect Pinout" 4. Tick "Analyze Tab" 5. Click "RUN" 6. Show the Backup File (from Step 1) 7. Wait and see code on Volcano Screen

That's All. Step 6-Reading Code from Flash File 1. Backup full Flash File 2. Now, go to “Tools” Tab 3. Click on "Search Password" 4. Click “OPEN” button and show the Backup file (Step 1) 5. Tick “Custom Condition” (i.e. finds numbers, find characters, find all (number and character)) 6. Click on “Start”. Wait until software reads 100%.

That's All. 7. Step 7-Write Working Flash File If all above options not work, then, you need working flash file which no have security code. Yes, now flash the working file to the faulty phone.

How to Find Security Code in SPD CPU? There are 7 ways to find security code in SPD CPU. If first steps not works, then’ then you have to follow another step and so on as described below: Step 1- FORMAT Format Your Mobile using volcano box. Is there Still Security Code? If yes, then go to step 2 Note: NV file is not important in SPD CPU like MTK still you can backup NV file if you like. You can backup NV file from READ NV Option.

Step 2- READ IMEI and Password 1. Go to “Detect” Tab 2. Choose Cable as "Auto Detect Cable" 3. Choose detect type as "(D+/D-) SPD/Ankya" 4. Click “DETECT” button 5. Click "Set Pinout" 6. Now, go to “SPD” Tab 7. Tick "Read IMEI and Read Password"

8. Un-tick "Auto Detect Pinout" 9. Choose “Type” according to the Phone (6600D etc)

10. Click on "RUN" That's All. Step 3- Phone Reset 1. Open SPD Tab 2. Tick "Auto Detect Pinout" 3. Tick "Phone Reset" 4. Choose “Boot File” According to the SPD CPU as shown below:

5. Choose Type as "USB (D+/D-)" OR “COM (RX/TX)" OR "COM (RX/TX) 8800D" (According to the phone as shown in the Picture below):

7. Choose Mobile Digonestic Port (Mobile Port, Not Box Port) 8. Click on “RUN” 9. Wait until the operation is completed. (NOTE: If you choose Type as COM (RX/TX) or COM (RX/TX) 8800D then you need to hold Power Button after clicking “RUN”)

That's All

Step 4- Unlock Code 1. Backup full Flash File (After Phone Reset) 2. Open the “SPD Tab” (Interface) 3. Un-tick "Auto Detect Pinout" 4. Tick "Unlock Code" 5. Click "RUN" 6. Show the Backup File (from Step 1)

7. Wait and see the code on Volcano Screen

That's All. Step 5- Unlock Code Method 2 1. Backup full Flash File (After Phone Reset) 2. Open the “SPD Tab” (Interface) 3. Click on "Flash File" and Choose the Back up file (from Step 1) 4. Un-tick "Auto Detect Pinout" 5. Tick "Unlock Code" 6. Click "RUN" 7. Show the Backup File (from Step 1) 8. Wait and see the codes on Volcano Screen

That's All.

Step 6- Reading Code from Flash File 1. Backup full Flash File 2. Now, go to “Tools” Tab 3. Click on "Search Password" 4. Click “OPEN” button and show the Backup file (Step 1)

5. Tick “Custom Condition” (i.e. Find numbers, find characters, and find all (number and character)) 6. Click on “Start”. Wait until software reads 100%

That's All.

Step 7- Write Working Flash File If all above options not work, then, you need working flash file which no have security code. Yes, now flash the working file to the faulty phone.

How to Find Security Code in MSTAR CPU? There are 7 ways to find security code in Mstar CPU. If first Step fail, then, follow the another step and so on as described below: Step 1- FORMAT Only 8533C CPU can be format that means except 8533c CPU, other type of CPU can not format using Volcano Box. If your mobile is 8533C, then, format the mobile using volcano box. Is there Still Security Code? If yes, then go to step 2.

Step 2- Phone Reset Method 1 1. Go to “Detect” Tab 2. Choose Detect as "(D+/D-) Mstar"

3. Click on “Detect” button

4. Wait until software detects pinout of the mobile 5. Go to “MSTAR” Tab 6. Tick "Phone Reset" 7. Click on “RUN” (Note: No need to un-tick or tick "Auto Detect Pinout" because when you do the job From Detect Tab, it remains un-checked)

That's All Step 3- Phone Reset Method 2 1. Power ON Mobile with Sim card and Battery 2. Connect USB Cable Mobile to Computer 3. After this, you will see two options in your Device (mobile) 1. Mass Storage and 2. COM port. 4. Now, Choose COM Port from your mobile and wait few seconds. Computer will make

Separate Port for this Device. 5. Now, Open Volcano Software “Mstar” Interface. 6. Choose Mobile Diagonestic Com Port (that is detected Step 4). 7. Tick "Phone Reset" option 8. Click on "RUN"

That's All

Step 4- Reading File to find Code You can also find password from Reading Flash File. Check the picture below:

Step 5- Unlock Code

1. Backup full Flash File (After Phone Reset) 2. Open the “Mstar” Tab (Interface) 3. Un-tick "Auto Detect Pinout" 4. Tick "Unlock Code" 5. Click "RUN" 6. Show the Backup File (from Step 1) 7. Wait and see code on Volcano Screen

That's All.

OR 1. Backup full Flash File (After Phone Reset) 2. Open the “Mstar” Tab (Interface) 3. Click on "Flash File" and Choose the Backed UP file (from Step 1) 4. Un-tick "Auto Detect Pinout" 5. Tick "Unlock Code" 6. Click "RUN" 7. Show the Backup File (from Step 1) 8. Wait and see code on Volcano Screen That's All. Step 6- Reading Code from Flash File 1. Backup full Flash File 2. Now, go to “Tools” Tab 3. Click on "Search Password" 4. Click “OPEN” button and show the Backup file (Step 1)

5. Tick “Custom Condition” (i.e. Find numbers, find characters, find all (number and character)) 6. Click on “Start”. Wait until software reads 100%.

That's All. Step-7 Flash For Unlock The name of this tool "Flash for Unlock" is clearly tells you that this is the tool to unlock for security code (users Code) if all other methods fail. This tool will remove the security code of the file from "Backup File" and writes the same file to the phone. So, remember this tool is same is "Write File" but little bit different is that this tool remove security code from the flash file and writes file to the phone. 1. Backup Full Flash File and Save to the Hard disk.

2. Now, go to "Mstar" Tab 3. Click on "Flash File" and Show the location of the Backup file and press "OK" 4. Choose Boot File as "Built-in_Default". Note: Sometimes, you have to change boot file if necessary. 5. Tick "Flash for unlock" 6. Tick "Auto-detect Pinout"

7. Choose "Baud Rate" different if necessary 8. Click on "Run" 9. When Computer asks you "Do you read Full Flash from this phone as backup? We strongly recommended you before do anything Read Full Flash from Phone. Do you want to continue?” Click "Yes" 10. Wait until the operation is completed. That's All Step 8- Write Working Flash File If all above options not work, then, you need working flash file which no have security code. Yes, now flash the working file to the faulty phone.

How to Find Security Code in Coolsand / RDA CPU? In Coolsand CPU, only RX/TX and USB method (Using Original Cable) supported. There are 5 ways to find security code in Coolsand / RDA CPU. If first Step fails, then follow another step and so on as described below: Step 1- FORMAT You can format RX/TX and USB method. No Need to mention Flash Type and Flash Size, Just Click on FORMAT Button. That's All. Still, there is security code, then, follow the next step. Warning: Back up Full Flash (File) Before Format.

Step 2- Unlock Code 1. RX/TX Method 1. Go to Coolsand & RDA Tab 2. Choose Boot File as “Built-in BOOT_B”

3. Tick "Unlock Code" 4. Tick "Auto Detect Pinout" 5. Click on "RUN" Button 6. Hold the Power Button until software detects mobile's pin-out and starts boot downloading 7. Wait until operation is completed. That's All 2. USB Method 1. Go to “Coolsand & RDA” Tab 2. Choose Boot File as “Built-in BOOT_B” 3. Tick "Unlock Code" 4. Un-Tick "Auto Detect Pinout" 5. Tick “USB Mood” 6. Click on "RUN" Button 7. Insert the battery into the device 8. Press and hold “0” button and connect USB cable to the computer. 9. Wait until the operation is completed.

Note: Alternately, you can do this choosing “Built-in Auto” Boot type and choosing Flash Type from

drop down menu. Step 3- Find Password 1. Backup full Flash File (After Mobile Format) 2. Open the Coolsand & RDA Tab (Interface) 3. Click on "Flash File" and Choose the Backed UP file (from Step 1) 4. Un-tick "Auto Detect Pinout" 5. Tick "Find Password" 6. Click "RUN" 7. Wait and see code on Volcano Screen

That's All. Step 4- Reading Code from Flash File 1. Backup full Flash File 2. Now, go to “Tools” Tab 3. Click on "Search Password" 4. Click “OPEN” button and show the Backup file (Step 1) 5. Tick Custom Condition (i.e. finds numbers, find characters, and find all (number and character)) 6. Click on “Start”. Wait until the software reads 100%.

That's All.

Step 5- Write Working Flash File If all above options not work, then, you need working flash file which no have security code. Yes, now flash the working file to the faulty phone.

Pattern Lock How to remove Pattern Lock? Pattern Lock is one kind of security code in the device (device). When there is pattern lock you can see the following screen:

To open the pattern lock, you have too many ways. But, simple ways is as follows: 1. Open the Volcano Box Software 2. Go to the MTK/SPD/Mstar/Coolsand interface 3. Read Full Flash File and save it on the Hard Disc 4. Now, Un‐tick “Auto Detect Pinout” 5. Tick “Unlock Code”

6. Click “RUN” button 7. Show the location of the Saved file (Step 3) and click “Open” 8. Wait Operation is completed.

Now, you can see many Privacy Lock codes on the Volcano Screen as shown above. Among them, one may your Pattern Lock code. In my case, the device code is 1235. Now, Open Mobile with battery and Try to slide your finger 1 to 3 and then 5. (1 to 2, 2 to 3 and 3 to 5). Check the picture:

That’s All. For More Detail Check the Video: http://www.youtube.com/watch?v=hQDu1xWl3S0

NV (CNV) NV file is Non Volatile Memory. NV stores the memory without voltage and also supports when you disconnect the battery. Did you notice, when you disconnect the battery, the device (mobile) time will change because, time needs continuous voltages but when you remove the battery, then, security code etc not changes that means it does not require voltages. In NV such memories are saved which doesn't require voltages like Security Code Network Code Profile Setting Network Calibration Incoming/ Outgoing Call Records Contacts In Samsung this file called EEPROM (Electronically Erasable Programmable Read Only Memory) In Nokia this file called PM (Permanent memory) In LG it's called NVM (non volatile memory) In the Case of Chinese Mobile, We need live mobile (Not dead from Software also) to read‐write NV file. We can't write NV file in Dead Phone or Restarting Phone.

Why We need back of NV when we format the Chinese Mobile? When we format the device, Network Code and Network Calibration etc are changed. So, we need to back of NV before we start Format. If something goes wrong, then, we can restore NV file and our device will be Okay. Normally, you can find NV file in MTK, SPD, Coolsad and RDA CPU. It is important to back of NV file from MTK, Coolsand, RDA CPU but from SPD CPU, not important. Still, you can backup NV file from SPD CPU. Volcano Box supports backing up NV from MTK, SPD, COOLSAND, RDA CPUs.

How to back up NV file in MTK CPU? We have to follow these steps to backup NV file from the Volcano Box: 1. Open the Volcano Software in MTK interface. 2. Tick "General Para" 3. Tick "Auto Detect Pinout" 4. Click on "RUN" 5. Press and hold the power of the device (Mobile) for few seconds.

6. Software detects RX and TX and opens new Windows for this. 7. Click on "Start" 8. Press and hold the Power button of the Device few seconds again. 9. Wait until software reads full information of the device 10. Click on "Export Parameter" 11. Give the file name and click on "Save File" 12. You can see the message as "Parameter has been exported" for future use

That's All.

How to restore NV file in MTK CPU? We have to follow these steps to restore NV file from the Volcano Box: 1. Open the Volcano Software in “MTK” interface. 2. Tick "General Para" 3. Tick "Auto Detect Pinout" 4. Click on "RUN" 5. Press and hold the power of the device (Mobile) for few seconds. 6. Software detects RX and TX and opens new Windows (Box) for this purpose. 7. Click on "Start" 8. Press and hold the Power button of the Device few seconds again. 9. Wait until software reads full information of the device 10. Click on "Import Parameter" 11. Choose the NV file of this mobile from your computer and click "OPEN" 12. You can see the message as "Parameter has been exported"

That's All.

How to back up NV file in SPD CPU? NV of SPD not so important like MTK cup. You can backup NV file of SPD CPU following ways: 1. Open the Volcano Software in SPD interface (TAB) 2. Choose the Boot File According to the type of Mobile CPU (SPD CUP type)

3. Choose the “Type” as shown below:

4. Tick or un‐tick "Auto Detect Pinout" according to the Operation (RX/TXC or D+/D‐) 5. Choose the "Baud Rate"

6. Click on "Read NV" 7. Press and hold the Power Button for few seconds; if you are using RX/TX method. 8. Wait until Operation is Completed. 9. Give the file name and click on "Save File" 10. You can see the message as "Parameter has been exported"

Note: 1. if the CPU Type is 6610/20, then, Baud Rate 230400 is the best for the best result. 2. SPD 8800H only supported yet. That's All.

How to restore NV file in SPD CPU? NV of SPD not so important like MTK cup. You can re‐store NV file of SPD CPU following ways: 1. Open the Volcano Software in SPD interface (TAB) 2. Choose the Boot Key according to the Mobile CPU Type (SPD CUP type)

3. Choose the “Type” as shown below:

4. Tick or un‐tick "Auto Detect Pinout" according to the Operation (RX/TX or D+/D‐) 5. Choose the "Baud Rate"

6. Click on "Write NV" 7. Show the Location of NV file of the mobile from our computer and click "Open" 8. Press and hold the Power Button for few seconds; if you are using RX/TX method. 9. You will see the message as "Parameter has been exported"

Note: 1. if the CPU Type is 6610/20, the, Baud Rate 230400 is the best for the best result. 2. SPD 8800H only supported yet. That's All.

How to Work NV file in Coolsand and RDA CPU? NV of Coolsand and RDA is also important like MTK CPU. You can re‐store NV file of Coolsand and RDA using following ways: How to Read CNV file of Coolsand / RDA CPU? 1. Open the Volcano Software in "Coolsand & RDA" interface 2. Choose Boot File as "Built-in BOOT_B" 3. Tick "Read UserArea" 4. Tick "Auto-detect Pinouts" 5. Choose Brad Rate different if necessary 6. Click on "RUN" 7. Press and hold "Power Button" of the Mobile for few seconds.

8. Wait, till operation is completed.

How to Write CNV file of Coolsand / RDA CPU? 1. Open the Volcano Software in "Coolsand & RDA" interface 2. Choose Boot File as "Built-in BOOT_B" 3. Click on "Flash File" and choose the CNV file of your Device (Mobile) 4. Tick "Write UserArea" 5. Tick "Auto-detect Pinouts" 6. Choose “Brad Rate” different if necessary 7. Click on "RUN" 8. Hold the Power Button until software detects mobile's pin-out and starts boot downloading.

9. Wait, till operation is completed.

How to Work NV file in Qualcomm CPU?

NV of Qualcomm is important like MTK cup. You can re‐store NV file of Qualcomm CPU bye the following ways: 1. Detecting QUALCOMM CPU 2. Saving-Writing with 3rd Party software 1. Detecting QUALCOMM CPU We can Detect QUALCOMM models from USB mood using following ways: 1. Open the Volcano Software in "DETECT" interface (Tab) 2. Choose "(D+/D-)Common USB devices" 3. Click on "Detect" button 4. When Volcano Software ask you "For many phones, charge pins need to be set in order to identify USB devices or detection will fail. It is recommended that you set charge pins in (Pinout) first, and then starts detection. Continue detecting? Yes/No" Click on "Yes"

5. Completely power off the device, and insert Battery to the mobile and now, connect it to the computer with the help of USB cable. 6. Wait operation is completed. 7. Click on "Set Pin-out" 2. Saving-Writing with 3rd Party software

Now, you can save and restore NV of Qualcomm CPU with any 3rd party software. For more, please visit the link: http://www.youtube.com/watch?v=67hZIlpcjPQ

FORMAT Format clears users data (including security code, other setting including picture etc) of the device and restore mobile its original form. We must back up Flash File and NV (CNV) file before starting Format. Why should we back up Flash file and NV file before stating Format? Format removes user data including security code etc but sometimes goes wrong after formatting like mobile signal not works, IMEI corrupts or mobile goes dead. If you have Flash File, then, you can re-flash the device later. Same the way, if you have NV file backup, you can fix the network problem caused by the software. A. MTK Formatting There are 3 ways to format mobile. They are RX/TX, D+/D‐ method and USB Method. 1. RX/TX Method Warning: We request you to back up Flash File and NV File before starting Format. 1. Open the Volcano Software MTK interface 2. Choose the Boot File if it required (Otherwise no need to choose this)

3. Tick "Format" 4. Tick "Auto Detect Pinout" 5. Choose the “Baud Rate”, if necessary

6. Click "RUN" button 7. Hold the Power Button until software detects mobile's pin-out and starts boot downloading 8. When Computer ask "Do you read Full Flash from this phone as backup", Click "Yes" if you have already backed up Flash File 9. Click on "Auto" and "OK" respectively

10. Press and hold on Power Button for few seconds 11. When computer ask "Do you read nvdate from this phone as backup?” click "Yes" if you have taken back. 12. Wait until operation is completed.

That's All.

2. (D+/D-) Mstar Method (Using Volcano Main Cable + Jigs) 1. Open the Volcano Software “Detect” interface 2. Choose Cable as "Auto Select Cable" 3. Choose Detect Type as "(D+/D‐) Mstar" 4. Click on "Detect" and wait until Detection will be completed. 5. Click on "Set Pinout"

6. Now, Open the Volcano Software “MTK” interface 7. Choose the Boot File if it required (Otherwise no need to choose this) 8. Tick "Format" 9. Un‐tick "Auto Detect Pinout"

10. Choose the Baud Rate, if necessary. 11. Click "RUN" button 12. When Computer ask "Do you read Full Flash from this phone as backup", Click "Yes" if you have already backed up Flash File 13. Click "Auto" and "OK" respectively 14. Press and hold the Power Button until software detects mobile's pin-out.

15. When computer ask "Do you read nvdate from this phone as backup?” click "Yes" if you have taken back. 16. Wait until operation is completed. That's All.

3. USB Method (Using Original USB Cable) 1. Open the Volcano Software MTK interface 2. Choose the Boot File if it required (Otherwise no need to choose this) 3. Tick "Format" 4. Un‐tick "Auto Detect Pinout" 5. Tick "USB Mode" 6. Choose the Baud Rate, if necessary. 7. Click "RUN" button 8. When Computer ask "Do you read Full Flash from this phone as backup", Click "Yes" if you have already backed up Flash File 9. Click "Auto" and "OK" respectively 10. Press and hold on Power Button for few seconds 11. When computer ask “Do you read nvdate from this phone as backup?” click "Yes" if you have already backed up NV data. 12. Press Boot Key if Necessary (From Mobile Keypad) 13. Holding Boot key, Connect USB Cable between Mobile and Computer

14. Wait until operation is completed.

That's All. B. SPD Formatting You can format SPD CPU with RX/TX, D+/D- Method 1. RX/TX SPD Formatting 1. Open Volcano Software in “SPD” interface. 2. Tick "Auto‐detect Pinout" 3. Choose Boot File if Necessary. Otherwise just leave it in “Built-in Boot_01”

5. Choose Type as “COM (RX/TX)” 6. Change “Baud Rate” if necessary

7. Click “RUN” 8. Press and hold the Power Button until software ask you something.

8. When Computer ask "Do you read Full Flash from this phone as backup", Click "Yes" if you have already backed up Flash File 9. Click "Auto" and "OK" respectively 10. Press and hold on Power Button shortly.

11. When computer ask you "Do you read nvdate from this phone as backup?” click "Yes" if you have already backed up NV data 12. Wait until operation is completed.

2. D+/D- Formatting (Using Volcano Box Main Cable + Jigs) 1. Open the Software in SPD interface 2. Choose the “Boot File” according to the SPD CPU

3. Tick “Format” 4. Tick “Auto detect Pinout” 5. Choose “Type” as necessary

7. Change “Baud Rate” if necessary.

7. Click “RUN” 8. When Computer ask "Do you read Full Flash from this phone as backup", Click "Yes" if you have already backed up Flash File 9. Click "Auto" and "OK" respectively 10 When computer ask "Do you read nvdate from this phone as backup?” click "Yes" if you have already backed up NV data. 11 Wait until operation is completed.

Still, not understand? Check the video: http://www.youtube.com/watch?v=vROlucr43_Y

OR 1. Open the Volcano Main Software Interface. 2. Go to “Detect” Tab 3. Choose cable type: “Auto Select Cable” 4. Choose Detect Type: “(D+/D‐) SPD/Ankya” 5. Click on “DETECT” tab and wait until volcano Detect the CPU 6. Now, Click on "Set Pinout”

7. Now, go to SPD Interface 8. Choose the Boot File according to the SPD CPU 9. Tick “Format”

10. Un‐tick “Auto Detect Pinout” 11. Choose Type as necessary 12. Change “Baud Rate” if necessary. 13. Click “RUN” 14. When Computer ask "Do you read Full Flash from this phone as backup", Click "Yes" if you have already backed up Flash File 15. Click "Auto" and "OK" respectively 16. When computer ask "Do you read nvdate from this phone as backup?” click "Yes" if you have already backed up NV data. 17. Wait until operation is completed.

C. Coolsand & RDA Formatting You can format Coolsand & RDA mobile with RX / TX and USB method. With new Version of Volcano Setup, no need to mention about format Address and length just choose Boot File as “Built-in BOOT_B”. We request you to back up Flash File before starting Format. 1. FORMAT (Using RX-TX Method) 1. Open the Volcano Software in “Coolsand & RDA” interface 2. Choose Boot File "Built-in BOOT_B" 3. Tick "Format" 4. Tick "Auto Detect Pinout" 5. Choose Flash Type as "Auto"

6. Choose the Flash Type “Auto”.

7. Choose "Baud Rate" if necessary (No need to Specify Baud Rate. Still this will be necessary in some cases) 8. Click on "RUN" button

9. Press and hold the Power Button until software detects mobile's pin-out and starts boot downloading 10. When Computer ask "Do you read Full Flash from this phone as backup", Click "Yes" if you have already backed up Flash File 11. Click "Auto" and "OK" respectively. 12. Press and hold on Power Button of the mobile for few seconds. 13. When computer ask “Do you read nvdate from this phone backup?” click "Yes" if you have taken back. 14. Wait until operation is completed. That’s All. NOTE: If this method not working for you then, you can do another way choosing Boot Type as “Builtin Auto” and choosing Flash Type manually from drop down list. 2. FORMAT (Using Original USB Method) You can also Write Flash File with USB Cable + Battery. 1. Open the Volcano Software in Coolsand & RDA interface 2. Choose Boot File "Built-in BOOT_B" 3. Tick "Format"

4. Un-tick "Auto-detect Pinout" 5. Tick "USB mode" 6. Choose "Baud Rate" if necessary 7. Click on "Run" 8. Insert the Battery into the Mobile Now. 9. Press and hold "0" button and insert the USB cable to the computer. 10. Install the necessary driver if asked. 11. Wait until the operation is completed. That's All.

NOTE: If this method not working for you, then, you can do another way choosing Boot Type as “Built-in Auto” and choosing “Flash” Type manually from drop down list. How do you know the Flash size? You can know the flash size of Coolsand & RDA if you take info by the volcano software. Check the videos for more: http://www.youtube.com/watch?v=uXyj0e9_pPI and http://www.youtube.com/watch?v=TA‐_LGHGkP8&feature=player_embedded#! That's All.

E. Android Formatting Basically there are two type of Android mobiles are seen in market. 1. MTK Android 2. SPD Android. 1. MTK Android Format 2. SPD Android Format

1. MTK Android Format (Using Detection Method)

1. Open the “MTK” Interface 2. Choose “Boot File” as "Built‐in Boot‐10 (v7.1216) (65xx_Android)” OR “Built‐in Boot‐12 (v7.1304) (65xx_Android)” 3. Un‐tick "Auto Detect Pinout" 4. Check "USB Mode" 5. Tick "Read Info" this tall you about Start Address and Format length of the Device Flash File. (You must specify this later at the time of Format) 6. Click "RUN" 7. Hold Boot KEY and insert USB Cable (Mobile to the Computer)

NOTE: Some phones you need to press and hold these keys before plug usb cable Volume + Volume Volume + and Volume Camera key Volume - and power button Volume + and power button Volume - and volume + and power Camera key and power Camera key and volume + Camera key and volume -

Power button Here, just notice the Mobile Flash Size and Start Address of the Flash File

Again, 8. Stay Same (MTK) Interface 9. Choose “Boot File” as "Built‐in Boot‐10 (v7.1216) (65xx_Android)” OR “Built‐in Boot‐12 (v7.1304) (65xx_Android)” 10. Un‐tick "Auto Detect Pinout" 11. Check "USB Mode" 12. Tick "Format" 13. Click on "RUN" 14. When Computer ask you "Do you u read Full Flash from this Phone backup", Click "Yes" if you have backup file. 15. Please input Start Address and Format length in the new windows that is just opened.

(You will find this when you take info from the volcano software at STEP 7) 16. Click on "Customize" 17. When you see the message " >>Waiting for phone's response, press power on/off button...”

Hold Boot Key insert USB Cable to the Computer

18. Please wait till software says Flash Erasing Complete!!

Note: 1. If the phone still asking you security code please turn it off and check the mmc or sim card inside the phone. If sim or mmc inside please take it out and power on the phone it will not ask you code again. Now, again, switch off your phone and insert Sim Card and MMC card and power on the phone, now, it won’t ask you the code. 2. Your phone is done. Make sure you Read Full flash file as back for Emergency. If something happens bad to you, then, you can write back your read flash file so your phone will come back to previous state!! Check the video for detail: http://www.youtube.com/watch?v=UZHEy6GgQvo

2. SPD Android Format 1. Open the “SPD” Interface 2. Choose “Boot File” as "Built‐in Boot‐14 (6820/8810)” 3. Tick "Auto Detect Pinout"

4. Choose Type as "USB (D+/D-)" 5. Tick "Read Info" this tall you about Start Address and Format length of the Flash File. (Later, you must specify this at the time of Format) 6. Click "RUN" 7. Hold Boot KEY and insert USB Cable to the computer (Mobile to the Computer) Now, just notice the Mobile Flash Size and Start Address of the File. Again, 8. Stay Same (SPD) Interface 9. Choose “Boot File” as " Built‐in Boot‐14 (6820/8810)” 10. Tick "Auto Detect Pinout" 11. Choose Type as "USB (D+/D-)" 12. Tick "Format" 13. Click on "RUN" 14. When Computer ask you "Do you u read Full Flash from this Phone backup", Click "Yes" if you have backup file. 15. Please input Start Address and Format length in the new windows (You will find this when you take info from the volcano software after STEP 7) 16. Click on "Customize" 17. When you see the message " >>Waiting for phone's response, press power on/off button...” Hold Boot Key insert USB Cable to the Computer 18. Please wait till software says Flash Erasing Complete!!

Note:

1. If the phone still asking you security code please turn it off and check the mmc or sim card inside the phone. If sim or mmc inside please take it out and power on the phone it will not ask you code again. Now, again, switch off your phone and insert Sim Card and MMC card and power on the phone, now, it won’t ask you the code. 2. Your phone is done. Make sure you Read Full flash file as back for Emergency. If something happens bad to you, then, you can write back your read flash file so your phone will come back to previous state!! That's All.

Flashing

In this topic we will discuss Read File, and write file. In Between them, Write file is important.

MTK CPU All the MTK CUP not supports Flashing in one method. Some needs one method, then, other needs other method. Normally, we can flash MTK mobile 3 ways:A. RX/TX Method B. D+/D‐ Method (With Volcano Main Cable and Jigs) C. USB Method (With Mobile Battery + Original USB Cable)

A.MTK RX‐TX Method of Read‐Write How to Read File (MTK‐RX/TX) 1. Open the Volcano Software in “MTK” interface 2. Tick "Auto Detect Pinout" 3. Choose "Boot File" if necessary 4. Choose "Baud Rate" if necessary 5. Click on "RUN" 6. Press and hold the Power Button until software detects mobile's pin-out and starts boot downloading 7. Wait until Operation is completed 8. Give the file name and save it for your future use.

All Done

How to Write File (MTK‐RX/TX) 1. Open the Volcano Software in “MTK” interface 2. Click "Flash File" and choose the flash file that you want to flash 3. Tick "Auto Detect Pinout"

4. Choose "Boot File" if necessary 5. Choose "Baud Rate" if necessary 6. Click on "Run" 7. Press and hold the Power Button until software detects mobile's pin-out and starts boot downloading 8. Wait until Operation is completed That’s All.

B. MTK D+/D‐ Read‐Write (With Volcano Main Cable and Jigs) How to Read File (MTK ‐ (D+/D‐) MTK USB mobile also supports Boot of Mstar (D+/D‐). The following ways you can do the operation: 1. Open the Volcano Software in “DETECT” interface 2. Choose Detect Type as "(D+/D‐) Mstar" 3. Press Boot Key if necessary (From Mobile Keypad). Some Mobile needs one boot-key and other mobile needs another boot-key. So, boot-key depends according to the device. 4. Click on "Detect" button"

5. Click on "Set Pinout"

6. Go to "MTK Tab" 7. Tick "Read Flash" 8. Un‐tick "Auto Detect Pinout" 9. Choose Boot File if necessary 10. Choose “Baud Rate” if necessary 11. Check the "Port Refresh" this is Mobile USB Port? If yes then go to Step 11. Otherwise Click on "Reset Pinout" and check the port again. 12. Click on "RUN" 13. Wait until the operation completed 14. Give the file name and save it for your future use.

That's All. How to Write File (MTK ‐ (D+/D‐)

MTK USB mobile also supports Boot of Mstar (D+/D‐). The following ways you can do the operation: 1. Open the Volcano Software in “DETECT” interface 2. Choose Detect Type as "(D+/D‐) Mstar" 3. Press Boot Key if necessary (From Mobile Keypad). Some Mobile needs one boot-key and other mobile needs another boot-key. So, boot-key depends according to the device. 4. Click on "Detect" button 5. Click on "Set Pinout"

6. Go to "MTK Tab" 7. Tick "Read Flash" 8. Un‐tick "Auto Detect Pinout" 9. Choose Boot File if necessary 10. Choose “Baud Rate” if necessary 11. Check the "Port Refresh" to find the USB Port for this mobile working or not. If yes then go to Step 12. Otherwise Click on "Reset Pinout" and check the Diagnostic port again. 12. Click on "Flash File" and choose the file that you want to flash the mobile.

13. Click on "RUN" 14. Wait until the operation completed That's All.

C. MTK USB Method Read‐Write (With Mobile Battery + Original USB Cable) How to Read File (MTK ‐ USB with original USB Cable) MTK USB mobile also supports USB Read. The following ways you can do the operation: 1. Open Volcano Software in "MTK Tab" 2. Tick "Read Flash" 3. Un‐tick "Auto Detect Pinout" 4. Choose Boot File if necessary 5. Choose Baud Rate if necessary 6. Tick "USB Mode" 7. Click "RUN" (Now, you will see the message on Volcano Screen ">>Analysis of USB Port, Please Insert Phone USB cable") 8. Power off the Mobile Put the Mobile Battery Back to the mobile. Let it be off yet. 9. Press Boot Key if necessary (Most of the MTK mobile used Call Button as Boot Key) 10. Insert USB Cable Mobile to computer holding the Boot Key 11. Wait until the Operation is completed. 12. Save the Read File to your Hard Disc.

That's All.

How to write File (MTK ‐ USB with original USB Cable) MTK USB mobile supports USB write as it supports USB read. The following ways you can do the operation: 1. Open Volcano Software in "MTK Tab" 2. Tick "Write Flash" 3. Un‐tick "Auto Detect Pinout" 4. Choose Boot File if necessary

5. Choose Baud Rate if necessary 6. Tick "USB Mode" 7. Click "RUN" 8. Show the location of Flash File that you want to flash. (Now, you will see the message on Volcano Screen “>>Analysis of USB Port, Please Insert Phone USB cable”) 9. Power off the Mobile Put the Mobile Battery Back to the mobile. Let it be OFF Position yet. 10. Press Boot Key if necessary (Most of the MTK mobile used Call Button as Boot Key) 11. Insert USB Cable Mobile to computer holding the Boot Key 12. Wait until the Operation is completed.

That's All.

SPD CPU

Normally, we can flash SPD mobile 2 ways: A. RX/TX Method B. D+/D‐ Method

A.SPD RX/TX Method How to Read File (SPD ‐ RX/TX) It is noted that some 6210 /20 CUP needs 230400 Baud Rate for Reading‐Writing File. 1. Open Volcano Software in SPD Interface

2. Tick "Read Flash" 3. Tick "Auto Detect Pinout" 4. Choose Type as "COM (RX/TX)" 5. Choose the "Boot File" if necessary 6. Choose the "Boot Rate" if necessary (6610/20 CPU is best at 230400) 7. Click "RUN" 8. Press and hold the Power Button until software detects mobile's pin-out and starts boot downloading 9. Wait until the process is completed. 10. Save the file in your Hard Disc. That’s All.

How to Write File (SPD ‐ RX/TX) It is noted that some 6210 /20 CUP needs 230400 Baud Rate for Reading‐Writing File. 1. Open Volcano Software in “SPD” Interface 2. Tick "Write Flash" 3. Tick "Auto Detect Pinout" 4. Choose Type as "COM (RX/TX)"

5. Choose the "Boot File" if necessary 6. Choose the "Boot Rate" if necessary (6610/20 CPU is best at 230400) 7. Click "RUN" 8. Choose the Flash File that you want to flash 9. Press and hold the Power Button until software detects mobile's pin-out and starts boot downloading 10. Wait until the process is completed. 11. Save the file in your HDD for your future use. That’s All. Check the video for more: http://www.youtube.com/watch?v=D2Bwg0W8pE4

B. SPD D+/D‐ Method It is noted that some 6210 /20 CUP needs 230400 Baud Rate for Reading‐Writing File. How to Read File (SPD ‐ (D+/D‐)

The following ways you can do the operation: 1. Open the Volcano Software in “DETECT” interface 2. Choose Detect Type as "(D+/D‐) Mstar" 3. Press Boot Key if necessary (From Mobile Keypad). Some Mobile needs this and different one mobile to another 4. Click on "Detect" button 5. Click on "Set Pinout"

6. Go to in "SPD Tab" 7. Tick "Read Flash" 8. Un‐tick "Auto Detect Pinout" 9. Choose Boot File if necessary 10. Choose Baud Rate if necessary 11. Click "RUN" 12. Wait until the operation is completed. 13. Save the Read File to your Hard Disc for future use.

That's All. NOTE: It is noted that some 6210 /20 CUP needs 230400 Baud Rate for Reading‐Writing File. How to Read File (SPD ‐ (D+/D‐)) The following ways you can do the operation: 1. Open the Volcano Software in “DETECT” interface

2. Choose Detect Type as "(D+/D‐) Mstar" 3. Press Boot Key if necessary (From Mobile Keypad). Some Mobile needs one type boot key which other needs another type of boot-key. So boot-key depends on the Device that you have. 4. Click on "Detect" button 5. Click on "Set Pinout" 6. Go to in "SPD Tab" 7. Tick "Write Flash" 8. Un‐tick "Auto Detect Pinout" 9. Choose Boot File if necessary 10. Choose Baud Rate if necessary 11. Click "RUN" 12. Choose the Flash File that you want to flash 13. Wait until the operation is completed. That's All. NOTE: It is noted that some 6210 /20 CUP needs 230400 Baud Rate for Reading‐Writing File.

MSTAR CPU How to Read File (Mstar) Mstar mobile supports (D+/D‐) USB Method. That means it does not support RX/TX method. 1. Open the Volcano Software in “DETECT” interface 2. Choose Detect Type as "(D+/D‐) Mstar" 3. Press Boot Key if necessary (From Mobile Keypad). Some Mobile needs this and different one mobile to another

4. Click on "Detect" button" 5. Click on "Set Pinout" 6. Go to "MSTAR Tab" 7. Tick "Read Flash"

8. Un‐tick "Auto Detect Pinout" 9. Choose Boot File if necessary 10. Choose “Baud Rate” if necessary 11. Check the "Port Refresh" to confirm that the device using USB port or not. If yes then go to Step 12. Otherwise Click on "Reset Pinout" and check the port again. 12. Click on "RUN" 13. Wait until the operation completed 14. Give the file name and save it to your hard disc for future use. That's All. How to Write File (Mstar) Mstar mobile supports (D+/D‐) USB method. That means it does not support RX/TX method. Mstar CPU writes files D+/D‐ method, and Writes IMEI from device COM port. 1. Open the Volcano Software in “DETECT” interface 2. Choose Detect Type as "(D+/D‐) Mstar" 3. Press Boot Key if necessary (From Mobile Keypad). Some Mobile needs one type of boot-key while others support another type of boot-key. Boot key might be different one mobile to another. 4. Click on "Detect" button 5. Click on "Set Pinout" 6. Go to "MSTAR Tab" 7. Tick "Read Flash" 8. Un‐tick "Auto Detect Pinout" 9. Choose “Boot File” if necessary 10. Choose “Baud Rate” if necessary

11. Check the "Port Refresh" to confirm that the device using USB port or not. If yes; then go to Step 12. Otherwise Click on "Reset Pinout" and check the port again. 12. Click on "Flash File" and choose the file that you want to flash the mobile. 13. Click on "RUN" 14. Wait until the operation completed That’s All.

Coolsand and RDA CPU How to Read File (Coolsand or RDA CPU) Coolsand and RDA mobile only support RX/TX, D+/D- USB, and Origional USB Cable method. 1. Read File - RX/TX Method 1. Open the Volcano Software in “Coolsand & RDA” interface 2. Choose Boot File "Built-in BOOT_B" 3. Tick "Read File" 4. Tick "Auto Detect Pinout" 5. Choose Flash Type as "Auto"

6. Choose Flash Size as "Auto"

7. Choose "Baud Rate" if necessary (No need to Specify Baud Rate. Still this will be necessary in some cases)

8. Click on "RUN" button 9. Press and hold the Power Button for few seconds. 10. Wait until software reads full flash and save it to your Hard Disc for future use.

That's All. Note: Your Readed Flash Size is Correctly Backed up? If the Read Flash Size is less than the "info" showed by Volcano Box using "Built-in_BOOT_b" and Flash Type as "Auto" then you have to change Boot type as "Built in Auto" and you have to choose flash type manually from drop down list as shown above and have to read flash file again. In "Built in Auto" you have to specify Flash Type from drop down list and you have to read Flash again. So remember, sometimes it is necessary to specify "Flash Type", "Flash Size" and "Baud Rate" at the time of reading flash file. 2. Read File - USB Method (Using Original USB Cable + Battery) You can also Read Flash File with the help of original USB Cable and Device Battery. 1. Open the Volcano Software in “Coolsand & RDA” interface 2. Choose Boot File "Built-in BOOT_B" 3. Tick "Read File" 4. Un-tick "Auto-detect Pinout"

5. Tick "USB mode" 6. Choose "Baud Rate" if necessary 7. Click on "Run" 8. Insert the Battery into the Mobile. 9. Press and hold "0" button and insert the USB cable to the computer. 10. Install the necessary driver if asked. 11. Wait until the operation is completed. 12. Save the Flash file for future use.

That's All. Note: Your Read Flash Size is Correct? If the Read Flash Size is less than the "info" showed by Volcano Box using "Built-in_BOOT_b" and Flash Type as "Auto" then you have to change Boot type as "Built in Auto" and you have to choose flash type manually from drop down list as shown above and have to read flash file again. In "Built in Auto" you have to specify Flash Type from drop down list and you have to read Flash again. So remember, sometimes it is necessary to specify "Flash Type", "Flash Size" and "Baud

Rate" at the time of reading flash file. How to Write File (Coolsand or RDA CPU) Coolsand and RDA mobile only support RX/TX, D+/D- USB, and Origional USB Cable method. 1. Write File - RX/TX Method 1. Open the Volcano Software in “Coolsand & RDA” interface 2. Choose Boot File "Built-in BOOT_B" 3. Tick "Write File" 4. Tick "Auto Detect Pinout" 5. Choose Flash Type as "Auto"

6. Choose Flash size "Auto"

7. Choose "Baud Rate" if necessary (No need to Specify Baud Rate at the time of File Reading still in some case you have to specify)

8. Click on "Flash File" and choose the file of the phone and press "OK" to choose it. 9. Click on "RUN" button 10. Choose the flash file from the Hard Disk or another type of Storage and click on "OK" 11. Press and hold the Power Button for few seconds. 12. Wait until the operation is completed. That's All. Note: If you are unable to write flash file using "Built-in_BOOT_b" and Flash Type as "Auto", then, you may try Boot type as "Built in Auto" and you have to choose flash type manually from drop

down list and try to flash again.

2. Write File - USB Method (Using Original USB Cable + Battery) You can also Write Flash File with the help of original USB Cable and Battery. 1. Open the Volcano Software in “Coolsand & RDA” interface 2. Choose Boot File "Built-in BOOT_B" 3. Click on "Flash File" and choose the desired flash file and click on "OK" 4. Tick "Write File" 5. Un-tick "Auto-detect Pinout" 6. Tick "USB mode" 7. Choose "Baud Rate" if necessary 8. Click on "Run" 9. Insert the Battery into the Mobile. 10. Press and hold "0" button and insert the USB cable to the computer. 11. Install the necessary driver if asked. 12. Wait until the operation is completed.

That's All.

Note: If you are unable to write flash using "Built-in_BOOT_b" and Flash Type as "Auto", then, you may try Boot type as "Built in Auto" and you have to choose flash type manually from drop down list and try to flash again.

Infenion CPU How to do Infineon SIM BLOCK Solution by the Volcano Box?

You have to follow 3 steps to do so: 1. 2. 3.

Save file from your device Decryption Write File

Save File from Your Device 1. 2. 3. 4. 5. 6.

Open the Volcano Software in “Infineon” interface (Tab) Choose “Boot File” if necessary Tick “Read File” Tick “Auto Detect Pinout” Choose “Baud Rate” different, if necessary Click on “RUN”

7. 8.

Press and Hold Power button for few seconds Save the file to your hard disc for future use.

Decryption Again, 1.

Open the Volcano Software in “Infineon” interface (Tab)

2. 3. 4. 5. 6. 7.

Tick on “Decryption” Click on “Data Decryption” Choose "Algorithm3" Click on “Data Download” and the show the saved file as we have mentioned above Click on “Decryption” and give the different file name than previous file. Click on “Save”

Write File Again, Open the Volcano Software in "Infineon Interface" 1. 2. 3. 4. 5. 6. 7. 8.

Open the Volcano Software in “Infineon” interface (Tab) Click "Flash File" and choose the Decrepted file from "Decryption" Option Choose “Boot File” if necessary Tick on “Write File” Tick “Auto Detect Pinout” Choose “Baud Rate” different, if necessary Click on “RUN” Press and hold the Power Button until software detects mobile's pin-out and starts boot downloading

After this, you Device (mobile) will be okay as shown in the picture below:

Android CPU There are two types of Android CPU are seen in the market yet. They are: 1. MTK Android 2. SPD Android So, we will discuss here to read and write MTK Android and SPD Android.

Read‐Write MTK Android MTK Android can write two ways are: 1. MTK Detection (D+/D‐) Method and 2. Original USB Cable method.

1. MTK Detection (D+/D‐) Method MTK (D+/D‐) method means, we use Volcano Main Cable + Volcano Positive and Negative Cable for Battery Power and we detect the mobile pin‐out first. Read File (MTK Detection ‐ (D+/D‐) Method) 1. Open the Volcano Software in ''DETECT" tab 2. Choose Detect Type as "(D+/D‐) Mstar" 3. Press and hold Boot Key, if necessary. 4. Click on "Detect" button and wait until detection is completed. 5. Click on "Clear Pinout" first 6. Choose the Same Pinout as detected above manually (Detected in Step 4.) 7. Click on "Set Pinout" 8. Go to “MTK” interface 9. Choose “Boot File” as "Built‐in Boot‐10 (v7.1216) (65xx_Android)” OR “Built‐in Boot‐12 (v7.1304) (65xx_Android)” 10. Tick "Read Flash" 11. Un‐tick "Auto Detect Pinout" 12. Choose “Baud Rate” if necessary (Check Port Refresh for Mobile USB Port” (Note: Mobile Port = Port that is taken by Device from the “Detect” Tab) 13. Click on "RUN" 14. When you see the message " >>Waiting for phone's response, press power on/off button.” Holding BOOT KEY, insert USB Cable to the Computer 15. Wait until the Operation is completed. That's All.

Write File (MTK Detection ‐ (D+/D‐) Method) 1. Open the Volcano Software in ''DETECT" tab 2. Choose Detect Type as "(D+/D‐) Mstar" 3 Press and hold on Boot Key, if necessary 4. Click on "Detect" button and wait until detection is completed. 5. Click on "Clear Pinout" first 6. Choose the Same Pinout as detected above manually (Detected in Step 4.) 7. Click on "Set Pinout" 8. Go to MTK interface 9. Choose “Boot File” as "Built‐in Boot‐10 (v7.1216) (65xx_Android)” OR “Built‐in Boot‐12 (v7.1304) (65xx_Android)” 10. Choose "Flash File" that you want to write to the Device 11. Tick "Write Flash" 12. Un‐tick "Auto Detect Pinout" 13. Choose “Baud Rate” if necessary (Check Port Refresh for Mobile USB Port” (Note: Mobile Port = Port that is taken by Device from the “Detect” Tab) 14. Click on "RUN" 15. Wait until the Operation is completed. That's All.

2. Read‐Write MTK (Original USB Cable Method) MTK Original USB method means, we are going to use mobile battery + Original USB Cable. In this method, we don't use “DETECT” TAB. Read File (MTK ‐ Original USB Cable Method) 1. Open the Volcano Software in “MTK” Interface 2. Choose “Boot File” as "Built‐in Boot‐10 (v7.1216) (65xx_Android)” OR “Built‐in Boot‐12 (v7.1304) (65xx_Android)” 3. Un‐tick "Auto Detect Pinout" 4. Tick "Read Flash" 5. Tick "USB Mode" 6. Choose “Baud Rate” if necessary 7. Click on "RUN" When you see the message " >>Waiting for phone's response, press power on/off button.” Hold BOOT KEY and insert USB Cable to the Computer

(Note: Make sure that Mobile is Switch Off and you are going to use Battery and Original USB Cable for this Operation.) 9. Wait until the Operation is completed. 10. Give the File name and save to the Local Hard Disc for future use.

That's All.

Write File (MTK ‐ USB Cable Method) 1. Open the Volcano Software in MTK Interface 2. Choose “Boot File” as "Built‐in Boot‐10 (v7.1216) (65xx_Android)” OR “Built‐in Boot‐12 (v7.1304) (65xx_Android)” 3. Click on "Flash File" and Choose necessary Flash File 4. Un‐tick "Auto Detect Pinout" 5. Tick "Write Flash" 6. Tick "USB Mode" 7. Choose “Baud Rate” if necessary 8. Click on "RUN" 9. When you see the message " >>Waiting for phone's response, press power on/off button.” Hold Boot Key and insert USB Cable mobile to the Computer (Note: Make sure that Mobile is Switch Off and you are going to use Battery and Original USB Cable for this Operation.)

10. Wait until the Operation is completed.

That's All. Check the Video for mere detail: http://www.youtube.com/watch?v=hBivvaKUyfA

Read‐Write SPD Android SPD Android can be done with two ways are: 1. Using “Detect” Tab and 2. Using “SPD” main Interface.

1. Using Detect Tab Read File (SPD ‐ (D+/D‐)) 1. Open the Volcano Software in ''DETECT" tab 2. Choose Detect Type as "(D+/D‐) SPD/Ankya" 3. Click on Boot Key, if necessary. 4. Click on "Detect" button and wait until detection is completed.

5. Click on "Clear Pinout" first 6. Choose the Same Pinout as detected above manually (Detected in Step 4.) 7. Click on "Set Pinout" 8. Go to SPD interface 9. Tick "Read Flash" 10. Un‐tick "Auto Detect Pinout" 11. Choose Boot File as "Built‐in Boot‐14 (6820/8810) 12. Choose Baud Rate if necessary 13. Choose Port Refresh as "Mobile Port" (Note: Mobile Port = Port that is taken by Device i.e. mobile) 14. Click on "RUN" 15. Wait until it completed. 16. Give the file name and save it to the Hard Disc. That's All.

Write File (SPD ‐ (D+/D‐)) 1. Open the Volcano Software in ''DETECT" tab 2. Choose Detect Type as "(D+/D‐) SPD/Ankya" 3. Click on Boot Key, if necessary. 4. Click on "Detect" button and wait until detection is completed. 5. Click on "Clear Pinout" first 6. Choose the Same Pinout as detected above manually (Detected in Step 4.) 7. Click on "Set Pinout" 8. Go to “SPD” Interface 9. Un‐tick "Auto Detect Pinout" 10. Tick "Write Flash" 11. Choose Boot File as "Built‐in Boot‐14 (6820/8810) 12. Choose “Baud Rate” if necessary 13. Click on "Flash File" and Choose necessary Flash File 14. Choose Port Refresh as Mobile Diagnostic Port (Note: Mobile Diagnostic Port = Port that is taken by Device i.e. mobile) 15. Click on "RUN" 16. Wait until it completed. That's All.

3. Using SPD Interface Read File (SPD ‐ (D+/D‐)) 1. Go to “SPD” interface 2. Tick "Read Flash" 3. Tick "Auto Detect Pinout" 4. Choose Type as "USB (D+/D‐)" 5. Choose Boot File as "Built‐in Boot‐14 (6820/8810) 6. Choose Baud Rate if necessary 7. Click on "RUN" 8. Wait until it completed. 9. Give the file name and save it to the Hard Disc for future use. That's All.

Write File (SPD ‐ (D+/D‐) 1. Go to “SPD” Interface 2. Choose Boot File as "Built‐in Boot‐14 (6820/8810) 3. Click on "Flash File" and Choose necessary Flash File 4. Un‐tick "Auto Detect Pinout" 5. Tick "Write Flash" 6. Choose Type as "USB (D+/D‐)" 7. Choose “Baud Rate” if necessary 8. Click on "RUN" 9. Wait until it completed. That's All.

How to Solve U disk Error using Volcano Box? U disk is the physical memory inside the mobile and which is related to application and games data. The total U disc size of the mobile is around 30 MB depends of the device. The U disc appears when you have error on application and game (10 MB Data around). After inserting USB Cable to the Computer, You will see two Options: 1. charging and 2. U Disk.

Actually, U disk is the Removable Drive which you can be seen from Explorer of the windows.

The U Disk has seen in the Sking Series Mobiles like S9300, S9220, S929 etc. which have mostly SPD 6530 CPU. You can remove this error using Volcano Box as mentioned below: 1. Open Volcano Box 1.7.5 or above (new version) 2. Open “SPD” Tab 3. Choose Auto Detect Pinout Type as "USB (D+/D-)" 4. Tick "Write Flash" 5. Select “Built-in-Boot_12 (6530)” 6. Click on “Flash File” button. Choose the Location of the Flash File. Here, you can’t see such a file because of the file format. The file format is *.img. Now, Click on Flash Type, choose "All Files". Now you can see the File type as *.img. Double Click on it. 7. Browse Path of your Desire Flash file 8. Make sure your select correct flash file for your desire mobile 9. Click on "Run" 10. Wait until process will finish.

That's All

Read File Completed but not Saved, What Should I do for it? 1. Open the Volcano Software Installed Folder 2. Check for file as “tmp_6” 3. The file “tmp_6” read by the software but you could not save it 4. Rename “tmp_6” as you like with *.bin extension. 5-Now, you can use this file to write or read user code etc. That’s All.

Some USB Supporting Mobile and Their Boot Keys New mobiles cannot be flashed without Boot Key and USB cable.Those mobiles need Boot Keys at the time of Operation (Reading File, Writing File etc). That Boot Key might be different depends on the mobile: 1. Call Button 2. Home Button 3. Camera Button

4. Back Key 5. 2+5 Buttons 6. 5 Button 7. Star (*) Button 8. Hash (#) Button 9. Star (*) + Hash (#) Key 10. Q+W Buttons 11. Left Top Manu Button 12. Right Top Manu Button

1. Q Mobile E 900 Cable: Nokia 5130/5310 USB Cable Boot Key: Call Button How to do: Press Boot Key, then, insert USB Cable to the Computer 2. G'Cing G M320 Cable: Nokia 5130/5310 USB Cable Boot Key: 2+5 (Press together at the time of operation) How to do: Press Boot Key, then, insert USB Cable to the Computer 3. Zong ZTE R260 Cable: Nokia 5130/5310 USB Cable Boot Key: Call Button How to do: Press Boot Key, then, insert USB Cable to the Computer 4. STG N300 (SPD) Cable: Nokia 5130/5310 USB Cable Boot Key: Back Button How to do: Press Boot Key, then, insert USB Cable to the Computer 5. YXTEL C6 (MSTAR) Cable: Nokia 5130/5310 USB Cable Boot Key: Call Button How to do: Press Boot Key, then, insert USB Cable to the Computer 6. Q Mobile E786 Cable: Motorola V3 Cable Boot Key: Home Button How to do: Press Boot Key, then, insert USB Cable to the Computer 7. YXTEL C910 Cable: Nokia 5130/5310 USB Cable

Boot Key: Call Button How to do: Press Boot Key, then, insert USB Cable to the Computer 8. G'Five L228 Cable: Motorola V3 Cable Boot Key: Star (*) Button How to do: Press Boot Key, then, insert USB Cable to the Computer 9. G Mobile J500 Cable: Motorola V3 Cable Boot Key: Hash (#) Button How to do: Press Boot Key, then, insert USB Cable to the Computer 10. Tstar SY-K6 Cable: Motorola V3 Cable Boot Key: Star (*) Button How to do: Press Boot Key, then, insert USB Cable to the Computer 11. FDT Nokia N70 Cable: Motorola V3 Cable Boot Key: Camera Button How to do: Press Boot Key, then, insert USB Cable to the Computer 12. FDT Nokia N70 Cable: Motorola V3 Cable Boot Key: Camera Button How to do: Press Boot Key, then, insert USB Cable to the Computer 13. Q Mobile E950 Cable: Nokia 5130/5310 USB Cable Boot Key: Home Button How to do: Press Boot Key, then, insert USB Cable to the Computer 14. Q Mobile E960 Cable: Nokia 5130/5310 USB Cable Boot Key: Home Button How to do: Press Boot Key, then, insert USB Cable to the Computer 15. Q Mobile X5 Cable: Nokia 5130/5310 USB Cable Boot Key: Call Button How to do: Press Boot Key, then, insert USB Cable to the Computer 16. Q Mobile E850

Cable: Nokia 5130/5310 USB Cable Boot Key: Call Button How to do: Press Boot Key, then, insert USB Cable to the Computer 17. Megagat 4210 Cable: Nokia 5130/5310 USB Cable Boot Key: Up Button How to do: Press Boot Key, then, insert USB Cable to the Computer 18. MTK X9 Cable: Motorola V3 Boot Key: Star (*) + Hash (#) Key How to do: Press Boot Key, then, insert USB Cable to the Computer 19. G' Mobile G88A Cable: Nokia 5130/5310 USB Cable Boot Key: Double Call Button (1 Call button for 1 sim and another call button for sim Press both Call button) How to do: Press Boot Key, then, insert USB Cable to the Computer 20. Q Mobile Q8 Cable: Nokia 5130/5310 USB Cable Boot Key: Right Top Manu Key How to do: Press Boot Key, then, insert USB Cable to the Computer 21. Q Mobile Q7 Cable: Motorola V3 Cable Boot Key: Right Top Manu Key How to do: Press Boot Key, then, insert USB Cable to the Computer 22. Q Mobile Q3i Cable: Motorola V3 Cable Boot Key: Q + W Buttons (Keypad button) How to do: Press Boot Key, then, insert USB Cable to the Computer 23. Q Mobile E450 Cable: Motorola V3 Cable Boot Key: Home Button How to do: Press Boot Key, then, insert USB Cable to the Computer

24. Mobile E180 Cable: Motorola V3 Cable Boot Key: Center (Menu) Button

How to do: Press Boot Key, then, insert USB Cable to the Computer 25. Qmobile e120 Cable: Motorola V3 Cable Boot Key: Home Button How to do: Press Boot Key, then, insert USB Cable to the Computer

26. Nokia X2-02 Cable: Motorola V3 Cable Boot Key: Star (*) Button How to do: Press Boot Key, then, insert USB Cable to the Computer

27. Q Mobile E300 Cable: Motorola V3 Cable Boot Key: Center (Menu) button How to do: Press Boot Key, then, insert USB Cable to the Computer 28. Yxtel W666 Cable: Nokia 5130/5310 USB Cable Boot Key: Right Top Button How to do: Press Boot Key, then, insert USB Cable to the Computer

29. Qmobile E440 (MTK 625a CPU) Cable: Nokia 5130/5310 USB Cable Boot Key: Call Button How to do: Press Boot Key, then, insert USB Cable to the Computer

30. Micromax X335 Cable: Nokia 5130/5310 USB Cable Boot Key: Call Button How to do: Press Boot Key, then, insert USB Cable to the Computer 31. G’Five U505 Cable: Volcano Main Cable Boot Key: 2+5 How to do: Insert the Volcano Main Cable, then, press 2+5 Boot Key and press Detect Button 32. Carlvo A6 Cable: Nokia 5130/5310 USB Cable

Boot Key: # How to do: Insert the Volcano Main Cable, then, press 2+5 Boot Key and press Detect Button 33. My Phone QTW88 Cable: USB Cable Boot Key : Q+S How to do: Insert the Volcano Main Cable, then, press 2+5 Boot Key and press Detect Button

Touch Calibration Sometimes when you format the Device (Mobile) Touch Calibration Data deletes and you can't call because you can't access to the device properly. Suppose, when Touch Screen Broken and mistakenly you have formatted the mobile without backing up Flash File. You can calibrate Touch screen replacing small or big touch screen than the mobile has. But, this is tedious process and waste of time also. Volcano has inbuilt Touch Calibration function. So, you do not waste time doing bla bal bal for this. You can calibrate Touch Screen 3 ways: 1. RX‐TX method 2. D+/D‐ Method 3. Flashing Method 1. RX‐TX method: The following ways you can calibrate Touch Screen:

1. Open Volcano in “MTK” interface 2. Tick "Auto Detect Pinout" 3. Tick "Touch Screen" 4. Choose "Boot File" if necessary 5. Choose "Baud Rate" if necessary 6. Click on "RUN" 7. Press and hold the Power Button until software detects mobile's pin-out and starts boot downloading. 8. Click on "Start" in new windows and wait few seconds 9. Click on "Calibrate Automatically" 10. Wait until you see the message "Screen Calibration Successfully". That's All. 2. D+/D‐ Method: The following ways you can calibrate Touch Screen: 1. Open Volcano Software in "Detect" Tab 2. Choose "D+/D‐ (Mstar)" 3. Click on "Detect" button 4. Click on "Set Pinout"

5. Go to “MTK” interface 6. Un‐tick "Auto Detect Pinout" 7. Tick "Touch Screen" 8. Choose "Boot File" if necessary 9. Choose "Baud Rate" if necessary 10. Choose "Mobile Port” 11. Click on "RUN" 12. Choose "Mobile Port" 13. Un‐tick "Power Off/On automatically before Operation" 14 Click on "Start" in new windows and wait few seconds. 15. Click on "Calibrate Automatically" 16. Wait until you see the message "Screen Calibration Successfully".

That's All. 3. Flashing: You have to save Flash File before "Format" the mobile. Saving Flash File means also saving Calibration Data. Sometimes, Calibration Data will be lost after format. The ultimate solution is to take flash File BACK UP. SPD Calibration is only possible if you have backup data or you have to flash the mobile with working Flash File from working Device.

Network There might be several reasons when there is no network in the Device. Among them, some reasons are: 1. IMEI Corrupted 2. NV data Corrupted 3. Country Lock 4. Other Problem 5. Hardware You can fix network 4 ways if there is no signal on the device: 1. IMEI Repairing 2. NV files Writing 3. Fix Signal

4. SP Unlock IMEI repairing and the NV Writing are already discussed previous topic. So, we are going to focus “Fix signal “and “Unlock” here:

3. Fix Signal Sometime, there might be problem of signal which may caused by the software and which could be fixed "Fix Signal" function of the Volcano Box Software. "Fix Signal" only supports 6253 CPU Yet. You can fix the signal of 6253 CPU following ways: 1. MTK ‐ RX/TX Method 2. MTK ‐ D+/D‐ Method

1. MTK ‐ RX/TX Method 1. Open the Volcano Software in “MTK” interface 2. Tick "Fix Signal" 3. Tick "Auto Detect Pinout" 4. Choose Boot File if necessary 5. Choose Baud Rate if necessary 6. Click "RUN" 7. Press and hold the Power Button until software detects mobile's pin-out and starts boot downloading.

8. Choose Mood 1 or 2 according to the Device (Mobile) 9. Click on "Start" 10. Press and hold Power Button until the animation not starts. 11. Choose "Mode" 1 or 2 depending of the Device (Mobile) 12. Click on "Fix Signal" That's All

2. MTK ‐ (D+/D‐) Method You can fix the signal of 6253 CPU following ways:

1. Open the Volcano Software in ''DETECT" tab 2. Choose Detect Type as "(D+/D‐) Mstar" 3. Click on Boot Key, if necessary. (Normally BOOT KEY might be Call Button, Call Button + Home Button etc.) 4. Click on "Detect" button and wait until detection is completed. 5. Click on "Set Pinout" 6. Go to MTK interface 7. Tick "Fix Signal" 8. Un‐tick "Auto Detect Pinout" 9. Choose Boot File if necessary 10. Choose Port Refresh to get back Mobile Diagnostic Port (Note: Mobile Diagnostic Port = Port that is occupied by the Device i.e. Mobile) 11. Choose “Baud Rate” if necessary 12. Click "RUN" 13. Hold Power Button of the Device (Mobile) 14. Choose Port Refresh to get back Mobile Diagnostic Port again. 15. Choose “Mood” 1 or 2 according to the Device (Mobile) 16. Un‐tick "Power Off‐On automatically before Operation" 17. Click on "Start"

18. Press and hold Power Button until the animation starts.

19. Choose "Mode" 1 or 2 depending of the Device 20. Click on "Fix Signal" That's All

5. SP Unlock (Network unlock) MTK mobile only supports SP UNLOCK with RX/TX method. You can unlock (Network Lock) using the following 2 ways (Both Necessary): 1. Lock code ‐ Already Discuss in Previous Topic (SECURITY CODE) 2. SP Unlock Step ‐1. Lock code 1. Open the Volcano Software in “MTK” Interface 2. Tick "Auto Detect Pinout" 3. Tick "Lock Code" 4. Choose “Boot File” if this is necessary 5. Tick "Auto Pinout" 6. Choose “Baud Rate” if necessary 7 Click on "RUN" 8. Press and hold the Power Button of the Device for few seconds. 9. Choose “Mood” 1 or 2 according to the Device (Mobile)

10. Tick "Power Off‐On automatically before Operation" if the Operation is from RX/TX 11. Click on "Start" 12. Press and hold Power Button until the animation screen not start. 13. Choose "Mode" 1 or 2 depending of the Device 14. Click on "Clear‐Phone Clock"

Step ‐2. SP Unlock 1. Open the Volcano Software in “MTK” Interface 2. Tick "Auto Detect Pinout"

3. Tick "SP Unlock" 4. Choose Boot File if this is necessary 5. Tick "Auto Pinout" 6. Choose Baud Rate if necessary 7. Click on "RUN" 8. Press and hold the Power Button for few seconds. 9. Wait until Operation is completed

Check the video for more (SP Unlock of Huawei G3511): http://www.youtube.com/watch?v=75H3lT1h‐GU That's All

Supported Models for SP Unlock All Supported MTK models which has listed in the Volcano Software like: Alcatel ZTE Huawei etc. Later, we will discuss about it more detailly.

MTK New Platform V1.01 Volcano Box New Module for MTK SP Unlock & Imei repair!! We are happy to announce a Brand new module for MTK mobiles. At the moment it have lot of Exciting Features like Sp unlock of almost All MTK phones which have Unlocking data in its NVM even you can unlock phones which is not in list and it have Sp lock data in its NVM. Also you can repair imei of most MTK phones with AT mode. This rewrites whole new Module just for Unlocking & Repair imei!! Let me introduce you whole new Module:

Go to MTK TAB then find MTK New Platform V1.01 and open it.

It will look like this:

This module has to ability to work in two type of MTK phones: 1. General Type phones. 2. RSA Protection type phones. Here is Supported List models.. Keep in mind we can unlock almost all MTK phones which have Service Provider locked data in their NVM whatever phone is in list or NOT. You can do it !!

How can I Unlock Phone which are locked on any service provider (Country Code)? You have too many ways for unlock 1. Open the Volcano “Detect” Tab 2. Choose Cable as "Auto Select Cable" and Choose Detect Type as "(RX/TX)MTK CPU" 3. Click on "Detect" and Press and hold power button of the mobile until it shows the Pinout of the mobile NOTE: Do not click on Set Pinout Yet.

3. Now, go to "MTK" tab and click on "MTK New Platform V1.01" 4. Choose Boot Type as "MTK Generic Phone” or "MTK RSA Phones" 5. Now, Choose the "Phone Brand" from drop-down list 6. Choose the "Phone Model" from drop-down list 7. Now, Go back to "Detect Tab" 8. Click on "Set Pinout" 9. Come Back to "MTK New Platform V1.01" 10. Choose the operation you want to do eg. Read Only, Unlock file, Relock file 11- Click on “Read info” 12- It will read your all details include your Network code etc

This is an example of unlocking of Alcatel OT606 model. Note: If your phone name is not listed in “MTK GENERIC PHONE”, then, select any generic model from the list.

How to reset User code from this new module? To reset user code you have to follow the manual as given below:

1- Select boot type of phone ( Generic for Normal MTK Phone which are Cloned Chinese phones and in some countries they have some local companies like in India they have a company named Micromax and in Pakistan they have company named Qmobile. These type of local companies are basically import phones from china. Even they are branded but in fact those phones are purely China made phones & Clones – RSA for Those MTK phones which have very Tight Security and mostly phones are International brands like Motorola & Alcatel etc. ) 2- Select proper model 3- Connect cable (Keep in mind You have to connect exact cable for some phones Pin finder will not help. They can detect Rx TX but they will not boot your phone so do Google and find it Or check in forum which cable is for which mobile for example if you have ZTE-281 you can find Rx TX from Volcano box pin finder but simple Rx TX will not help in booting. For this phone you have to use UART cable which has Ignition like LG Gs-102 cable just plug it and it will work fine. Some phones need to be disassemble and you have to sold RX/TX in Test points and some phones no need any special method they will be done with simple Volcano box Pin finder. Or just use your desire UART cable and use it on any other Uni-box and select Uni-box port in volcano box) 3.10 If you want to use Volcano box as pin finder then do this 3.11 Connect Correct JIG to phone and connect it 3.12 Go to Volcano box Detect Tab 3.13 Select MTK from list 3.14 Press and hold power button 3.15 Click on detect button 3.16 It will found RX/TX (Pinout) from phone 3.17 Now click on set Pinout 3.18 Now go to MTK tab and open New MTK module. Select port and you ready to do next operation 4- Click on Reset User code it will reset your phone code to default value like 1122- 1234 etc

How do I unlock Non Supported MTK phones (BETA)?

1- Select boot type of phone ( Generic for Normal MTK Phone which are Cloned Chinese phones and in some countries they have some local companies like in India they have a company named Micromax and in Pakistan they have company named Qmobile. These type of local companies are basically import phones from china. Even they are branded but in fact those phones are purely China made phones & Clones – RSA for Those MTK phones which have very Tight Security and mostly phones are International brands like Motorola & Alcatel etc.) 2- Select any mode 3- Connect cable (Keep in mind you have to connect exact cable for some phones Pin finder will not help. They can detect Rx TX but they will not boot your phone so do Google and find it Or check in forum which cable is for which mobile for example if you have ZTE-281 you can find Rx Tx from Volcano box pin finder but simple Rx Tx will not help in booting. For this phone you have to use UART cable which has Ignition like LG Gs-102 cable just plug it and it will work fine. Some phones need to be disassemble and you have to sold RX/TX in Test points and some phones no need any special method they will be done with simple Volcano box Pin finder. Or just use your desire UART cable and use it on any other Uni-box and select Uni-box port in volcano box) 3.19 If you want to use Volcano box as pin finder then do this 3.20 Connect Correct JIG to phone and connect it 3.21 Go to Volcano box Detect Tab 3.22 Select MTK from list 3.23 Press and hold power button 3.24 Click on detect button 3.25 It will found TX/TX (Pinout) from phone 3.26 Now click on set Pinout 3.27 Now go to MTK tab and open NEW MTK module. Select port and you ready to do next operation 4- Click on Backup Calibration 5- It will read some files 6- Click on process sim-lock file

7- It will read your codes

What is Backup Calibration? Backup calibration is for reading NVM area from almost all MTK phones which you can handle to boot phones with Volcano box. This is useful to unlock Non supported phones + you can save backups and write on faulty phones which have no service or code not accept after damage by other devices or some phone after format ffs have no service you can write backup files on it. Keep in mind this is BETA and we are not responsible of any damage cause of using this feature. Backup files have your many other information like your imei etc

How do I write imei with this new MTK module? 1- Select boot type of phone ( Generic for Normal MTK Phone which are Cloned Chinese phones and in some countries they have some local companies like in India they have a company named Micromax and in Pakistan they have company named Qmobile. These type of local companies are basically import phones from china. Even they are branded but in fact those phones are purely China made phones & Clones – RSA for Those MTK phones which have very Tight Security and mostly phones are International brands like Motorola & Alcatel etc.) 2- Select any mode (at the moment Generic mobile supported) 3- Connect cable (Keep in mind You have to connect exact cable for some phones Pin finder will not help. They can detect Rx TX but they will not boot your phone so do Google and find it Or check in forum which cable is for which mobile for example if you have ZTE-281 you can find Rx TX from Volcano box pin finder but simple Rx TX will not help in booting. For this phone you have to use UART cable which has Ignition like LG Gs-102 cable just plug it and it will work fine. Some phones need to be disassemble and you have to sold TX/TX in Test points and some phones no need any special method they will be done with simple Volcano box Pin finder. Or just use your desire UART cable and use it on any other Uni-box and select Uni-box port in volcano box) 3.1 If you want to use Volcano box as pin finder then do this 3.2 Connect Correct JIG to phone and connect it 3.3 Go to Volcano box Detect Tab 3.4 Select MTK from list

3.5 Press and hold power button 3.6 Click on detect button 3.7 It will found rx tx (Pinout) from phone 3.8 Now click on set Pinout 3.9 Now go to MTK tab and open New MTK module. Select port and you ready to do next operation 4- Click on imei box and write your desire imei 5- Select imei location ( which Imei you want to write ) 6- Click on write imei on AT mode 7- Press Power button from phone and it will done IF any information you got false please notify Volcano Team on SONORK.

How to unlock Vodaphone With Volcano Box? 1. 2. 3. 4. 5. 6. 7. 8. 9.

Open Volcano Software in “Detect” Interface (Tab) Choose Detect Type as “(RX/TX)MTK CPU” Click on “Detect” button Click on “Set Pinout” Now, go to “MTK” Interface (Tab) Un-tick “Auto detects pinout” Click On “New mtk 1.01 platforms” After opening new window, select “Phone Brand” Choose “Boot Type” from Drop down Lists (MTK Generic Phones or MTK RSA Phones)

10. 11. 12. 13. 14. 15. 16.

Choose “Phone Model” from Drop-Down Lists Choose or Tick “Read Only” Choose “Baud Rate” if it needs different Again go to “Detect” Tab and Click on “set Pinout” Come back to “MTK 1.01 New platform” Click on “Read info” and press and hold Phone power key for few seconds. Now, you will see the phone code in volcano main screen. Good Luck!!!

That’s All.

This list is from MTK GENERIC Type phones!! ------------Accord-----------A19 ------------Afone-----------H880 ------------Agtel-----------005 ------------Aino-----------F69F89 ------------Aio-----------N97 ------------AirFone-----------AF111 ------------Airphone-----------No1No4 ------------Airtel-----------L900 ------------Ajanta-----------A3000 A4200 A5000 A52 ------------Alfatel-----------C200 c500 C500 H1 H1A

H2 H3 H300 H4 H5 H5A H9 ------------Allview-----------S1S2 ------------Anoking-----------M9 ------------Anycall-----------Cect-168 D900 F488E i660 i908+ L708 S628 ------------Anycoll-----------A508 i908e L588 QS850 ------------Anycool----------D66 D66+ D66++ E307 E553 E553 E556 E802 E880 E880 CE880 LE883 E888 F818 T808 T818 ------------Anylink-----------6500 N99i

------------Anyoall-----------sgh-908i ------------Aobang-----------A880 ------------Aote-----------M660 ------------Appo-----------A300 ------------Aroma-----------D333 ------------Asus-----------V75 ------------Atan-----------M760 ------------AT-Telecom-----------Hi-Messenger ------------Aura-----------s902 S908 ------------Auro-----------6321 ------------Austar-----------F455+ ------------Avio-----------A101 A102 A201 A203 A204 A205 A301 A403 A6103 ------------Avvio-----------Avvio SN50 ------------Awang-----------A828 ------------Awang-----------A828 ------------A-zed-----------z62 ------------Baizhao-----------S8958 S8978

TV488 ------------Baoxing-----------K700 K900 N1000 ------------Barbie-----------P520 ------------Basicom-----------V9 ------------BBC-----------i508 ------------BBK-----------i2288 K202 K300 S201 S202 ------------Beetel-----------EC003 ev530 ------------BenQ-----------A53 C30 C36 ------------Bess-----------SP500 VZ210 VZ219 ------------Bestel-----------D5000+ D600 D6000 D7000+ E71TV ------------Bestking-----------A2688 ------------Bestone-----------KA08+ ------------Betels-----------6000+ ------------Beyond-----------B333 B38 B505

B530 B818 B83 BY125 C3 ------------Bilwani-----------B2 B3 B9 ------------BlackCherry-----------i2288 i508 P520 V9 ------------Blacklable-----------VVV363 ------------Bleu-----------255x 354x 355x 453x 454x 456x 466x 471x 476x 551x 555x 670x ------------Bliss-----------D108 D208 V98 ------------Blu-----------Click T300 Q200 Q200e ------------BMobile-----------C628 K298 TV9 X131 ------------BMW-----------760i

X6 ------------Bonmi-----------222 f430+ ------------Boostwer-----------E66 ------------Bossh-----------B70 D96 MD112 ------------Bost-Mobile-----------D615 ------------Bugatti-----------HOOD 164 ------------Buss-----------G618 ------------Byond-----------By-400 BY-888 BY-999 ------------Bytone-----------T3 ------------Capitel-----------P600 ------------Carbon-----------Art ------------Cartier-----------V8 ------------Cavio-----------ZT-618 ZTF1 ------------CayenneS-----------Z9 ------------CCK-----------E7 ------------Cect-----------003 1088 199 5800D 599 605 6300L

808 888 A008 A100 A1818 A519 A6668 A706 C2000 DC3000 C3600s C5188 C600 C800 C828 C8600 C92+ E900 F1200 F22i F22 658I 658 IP200 K2 K369 k770 K808 K808+ K828 K838L V918 M619 M8 M8600 N6298 N6298 N73 N788 N81+ N82 P168 P3711 P3711i

P8400 Q380 Q500 Q500BT Q558 Q618 Q618 Q638 Q8 Q86 S588 S613 S800 S90 S901 T1 T118 T520 T520 T590 T601 T689 T808 T918 T999 U880 U8810 U90 V180 V200 V329 V400 V6688 V668B V70 V768 V777 V90 V909 V909 V909 V98 V98 Y200

Y809 ------------CellOne-----------CX900 ------------Century-----------Piooner-B889+ ------------Cert-----------V400 ------------Cesim-----------V130 V30 ------------Cesim-----------V130 V30 ------------Changhong-----------A330 K218 L138 M838 ------------Changjiang-----------A968 N8+ ------------Changxing-----------A868 ------------Cherry-----------YC8 ------------CherryMobile-----------Q4Duo ------------Cherry-Mobile-----------D15 D20 Q61 ------------ChinaStar-----------C507 ------------CKing-----------K339 ------------Club-----------C900 ------------cNokia-----------E71TV TVE71 ------------Coby-----------MP777 ------------Cool-----------ATL-V8

------------Coral-----------255 280 450 550 620 640 655 680 C460P ------------Corby-----------L6W 6233 ------------Cosun-----------289 638 8988 9958 ------------Crew-----------202 ------------C-Right-----------C10 L2000 ------------Cross-----------CB97 ------------Crtel-----------C200 C800i C9900 D28 D90 DS110 i200 m31 T928 ------------CSL-----------C9900 DS110 i200 ------------cvfd-----------m31 ------------CXTel-----------D90 ------------Cyfon------------

C800i ------------Cynix-----------D28 ------------Dapeng-----------T2000 T3000 T5000 T928 ------------Daxian-----------529 619 669 780 8100 C800 C8100 E689 J168 J6 JT398 K888 KT1 N55 N800 P168 T108 X3000 X3000 X728 X9188 X960 X960 X999 ------------DBest-----------Royal-VT888 ------------Deco-----------F1 ------------Delta-----------X200 ------------Desay-----------K618 L608 M535 ------------Dezzo------------

D800 ------------Diamond-----------A1000 B711 ------------Diga-Mobile-----------D122 G123 G126 -----------Digiphone-----------9800TV ------------Dirland-----------M881 R100 ------------Disney-----------520+ ------------DMND-----------W720i ------------D-One-----------DG518 DG568 DG817 G628 ------------Donod-----------D505 D5130 D5130 D805 D805 D806 N95i ------------Doov-----------YH923 ------------Dopod-----------A6188 E61+ M500TV S560 ------------Dopodo-----------E61+ ------------Dorado-----------A006 C5000 D380 D890

T33i TV15 ------------Doro-----------338GSM HandleEasy-328gsm HandleEasy-345gsm HandleEasy-409s HandleEasy-410s ------------Dotcom-----------MB-2300TV ------------DRV_Mobiles-----------R52 ------------Dubao-----------758 768 777 738 ------------DV-Phone-----------V93i ------------Eagle-----------E52 ------------Egitel-----------V6 ------------Egltel-----------V7 ------------Eiroga-----------E666 ------------Ektel-----------C1-TV ------------Elenberg-----------MT520 ------------Elgin-----------EL-MP730 ------------Elitek-----------FN8618 ------------Elitex-----------8888 ------------Enimac-----------MQ8200 ------------Enmac-----------MQ3300 ------------Epoda-----------EP2502 ------------Etisalat------------

211FM -----------E-Top-----------S30 ------------ETouch-----------232Pro 303Pro 515Pro 616Pro 636Pro CG1 D108 D11 D12 D120 D160 D18 D200 D21 D220 D23 D30 D300 D33 D35 D38 D6 D60 DS100 F50 J100 J165 J168 MD82 X88i XL10 XL25 XL53 ------------Everfo-----------2456 2461 2601 2602 3008 E2211+

E7110 E711DTV E713D E730 ------------Evertek-----------E300 X90 ------------Evolve-----------GX607 ------------Eyo-----------E71 E71s ------------Fashion-----------A5688 F023 F025 T508 T588 ------------Ferrari-----------267v Ascent F1 F100 F108 F9 RHV3 ------------FixedPhone-----------FC8050 ------------FixMobile-----------A969 ------------Flying-----------F007 F035 F69 F800 F900 F916 F936 F996 ------------Flynet-----------F001 ------------Fly-Ying-----------E71 E71i

F003 F006 F007 F008 F021 F026 F030 F036 F080 F200 F636 F698 F99 ------------FMobile-----------B290 ------------Fome-----------N7 ------------Forby-----------G899 ------------Forme-----------6303 D386 D5 E71 F8 F8+ F808 F9 L300 M6 M800 N26 N78 N82 U969 ------------Fory-----------F288 ------------Foston-----------968B FS-829 FS-836B FS-862 FS-868B FS-868B

FS-889 FS-968 FS-968A FS-968B ------------Frost-----------701 F27 M23 ------------Fujistar-----------FJ-71 ------------Funker-----------F803DS ------------Funny Mobile-----------A8 V20 ------------G+G-----------i908 ------------Galaxy-----------T81 ------------Gaoxinqi-----------GXQ-F896 GXQ-H69 N82 TL528 ------------GeneralMobile-----------DST01 DST11 DST12 DST13 G333 ------------Genx-----------T-Z8 ------------Getek-----------TK806 ------------GFive-----------6620 7610 D902 E71 L700 M73 N79 N79i T33+

T580 U800 U808 X9 ------------G-Five-----------3120 3510 6620 736 7610 7630 800 C2160 C6233 D11 D60 D68 D70 D90 D90 D902 D99 E71y e82i F2 F3 F7 F8 G3000 G3000 G365 G370 GF18 GF73 GF73 GF73 H600 H91 i300 i310 L300 L700 M1 M33

M33 M5130 M6 M7 M73 M77 M99 M99 N79 N79i N90 Q33S9 T320i T33 T33+ T580 T580 T580 U303 U505 U505 U717 U800 U808 U828 U855 U879 U899 U909 U939 U969 X9 ------------G-Fone-----------301 311 411 422 ------------Gibox-----------MK396 ------------Gild-----------6700 FXD3600 H1 N9

S648 S76 S93 X5 ------------Gionee-----------A10-TV E99 I9 L7 MediaMobile V890 ------------Gjiang-----------W007 ------------Glid-----------6700 ------------Globul-----------TA2322n ------------GLX-----------2690 ------------GMobile-----------T68 ------------G-Mobile-----------N82 ------------Gnet-----------G8600 ------------Goldmobil-----------J88 ------------G-phone-----------5700 ------------GPS-Mobile-----------K3288 ------------Gradiente-----------GF500 GF950 ------------GreenPower-----------H48 ------------G-Right-----------6700 6700i 6800 C200 E52 G2 L200

L300 L400 L600 U808 U999 V400 X400 ------------G-Shine-----------L800 ------------GSmax-----------GS868 ------------G-Star-----------388 899 Q82 Q83 Q89 ------------G-Tide-----------W510 ------------GT-Mobile-----------V490 ------------Gucci-----------G600 G600 G629 G668 G888 ------------G-Von-----------620 ---------------Hagenuk-----------505 M628 ------------Haier-----------G111 HG-A8 HG-V70 M300 M306 M307 M500 S210 Z701 SZ702 ------------Hang-Jiang------------

A968 N97 ------------Hantel-----------A800 bl699 D801 H5 ht6088 HT6600 m2210 M2210 M678 T6800 TV-488 Y500 ------------Heady-----------H787 ------------Hic-----------S900 ------------Hidden-Dragon-----------N68 ------------Hightech-----------HT100 ------------Hightel-----------H869 ------------Higtel-----------H869 ------------HiPhone-----------T900 TV003 V188 ------------Hisong-----------M920 ------------Hitech-----------H38 H382 H39 H55 H61 H61 M21 ------------Hitune-----------A4 ------------Hitz------------

2211 ------------HKM-----------N6370 ------------Holyday-----------D600 ------------HTC-----------6262 A288 G1-TV90 Hero-G3 S900 ------------HT-Mobile-----------A30 G10 G11 G20 G30 ------------HTTEL-----------A800 ------------Hualu-----------6206 S600 YX9 YX9225 ------------Huante-----------S18 T600 TV-E71 ------------HUAWEI-----------HUAWEI G3610 HUAWEI G6600 HUAWEI G6603 HUAWEI G6605 HUAWEI G7002 ------------Huaxiang-----------N800 ------------Huayu-----------A3 CM336 G688 K878 K888 L888 M678

M818 ------------HX-Mobile-----------H1120 -----------Hyundai-----------HTV1000 MB-115 MB-121 MB-D125 MP880 W100 ------------Ianus-----------999 ------------Icell-----------i5130 -----------I-CELL-----------T33+ ----------Idealphone-----------i869 ------------Ifoe-----------P168 P168+ P168C ------------IMax-----------C82 ------------Imo-----------168 i178 L818 T738 ------------Imobile-----------2211 222 318 320 360 510 511 516 520 523 530 610 630 CE0889

IE3210 ------------iMODO-----------Y58 ------------Innovo-----------i8510 ------------Intex-----------IN1212 IN1224 IN2010 IN2020E IN2020QT IN2022 IN2030 IN2030D IN2030DX IN2040E IN2040N IN2044 IN2080 IN2080E IN2222 IN2233 IN2244 IN2266 IN3030 IN3055 IN3060 IN3070 IN3080 IN3333 IN4040 IN4060 IN4415 IN4420 IN4420S IN4455 IN4460 IN4466 IN4477 IN4488 IN4495 IN5030 IN5040 IN5050

IN5544 IN5555 IN6611 IN6633 iSmart ------------Iosound-----------i960 is102 ------------Io-Sound-----------301 i81 i90 ------------ITel-----------IT600 IT700 ------------Jalor-----------A8 ------------JBJ-----------N99 ------------Jeep-----------W900 ------------JFone-----------j87 ------------Jgtel-----------003i ------------JiaXing-----------N95 ------------Jincen-----------528 666 JC35 JC6700 JC9700 ------------Jing-Ling-----------E81TV -----------Jin-Ke-----------E100 ------------JinPeng-----------007FM 488 5108 5199 5199 5588

768 8283 A1280 A2198 A5120 A5616 A5658 A5688 A666 a799 A928 C3000 E55 E6180 E88 F8 H788 i908 JP1688 K330 K730 K989 L808 M8 M868 M99 S109 S1318 S1888 S2128 S868 V70 V70FM W169 W880 ------------Jinteyu-----------V678 ------------J-Kai-----------TV96K ------------J-Max-----------J95 ------------J-Max-----------J95 ------------Jugate------------

ZJ880 ZJR655 ZJS638 ------------Just5-----------CP10 ------------Karamfone-----------S4 X5 ------------Karbonn-----------K10 K118 K217 K25 K300 K331 K334 K343 K350 K406 K443 K444 K444i K445 K446 K450 K451 K460 K478 K496 K541 K550 K560 K570 K661 KC411 ------------Kenuo-----------D9 KN-76D N750 ------------Kenxindad-----------300 ------------Kiech-----------N8899 ------------Kifung------------

S108 ------------Kimcell-----------N88 ------------Kingdom-----------K2 ------------KingK-----------800 ------------King-One-----------K608 ------------Kingpo-----------E320 ------------Kingsun-----------V902 ------------Kinloong-----------K288+ ------------Kisen-----------P83 ------------Konka-----------A76 A76FM C623 D225 D620 D770 E303 G208 ------------Kotka----------E90 ------------KPN-----------One ------------KTech-----------8388 ------------K-Touch----------A5118 A615 A635 A905 A933 B830 b920 B922 D170 D700 D780

H777 H999 S515 V760 V908 V918 ------------KuXing-----------K1000 ------------Kyocera-----------C2500 E2500 E3500 S1600 ------------Kyoto-----------T737E ------------KZG-----------N200 ------------Laise-----------N99 ------------Lanboxiny-----------F8 ------------Lanix-----------LX11 X10 ------------Lanye-----------N70 ------------Lava-----------A10 A9 ARC02 KKT22 KKT24 KKT25 KKT30 KKT34 M23 ------------Lawow-----------A200 S10 S20 S50 ------------Lcphone-----------LC888 ------------Leady------------

MM10 MM95 X105 X501 ------------Leiniao-----------N800 ------------Lemon-----------212 216 E590 IQ303 ------------Lenovo-----------688 A330 A350 A539 E520 i510 i60 i706 P50 P612 P618 P650 S533 S62 Shark32 ------------Lephone-----------A12 ------------Lian-Sheng-----------L995 ------------Life-----------DST01 ------------Lipiec-----------T800 ------------Longtel-----------E3 S800 S88 ------------LongXing-----------M3 ------------Lontin-----------8820 E69

------------Louis-Yuitton-----------T658 ------------Louis-Yuitton-----------T658 ------------LX-Mobile-----------TV ------------Magicon-----------MG3250 MG901 ------------Magicon-Harmony-----------MG901 -----------Malata-----------MT118 MT256 MZ280 T256 ------------Matrix-----------M1 M2 M20 M3 N82m ------------Maximus-----------EX75 T44 ------------Maxtel-----------K48 ------------Maxtron-----------MG175 MG182 MG278 ------------Maxx-----------GC1000 MQ340 MQ430 MX118 MX122 MX124 MX235 MX292 MX304 MX316 MX322 MX333

MX335 MX404 MX425 MX435 MX463 MX470 MX480 MX488 MX533 MX534 MX713 MX745 ------------Mebaya-----------A18 ------------Megafon-----------CP10T DM15 ------------Megatec----------Luxe -----------Megatek-----------M100 ------------Meidea-----------E65 E66 Y100 Y1000 Y300 Y400 Y500 ------------Melbon-----------M2 MB-606m ----------Message-phone-----------QS150 ------------Metfone-----------Closer ------------Metfone-----------Closer ------------Metom-----------M20 M20IV M20TV M28 M29

M39 MT309 N11 N81 N82 T300 ------------Mex-----------MX14 BSN95 N95 ------------MFU-----------6700 M6 ------------Mi-----------200 ------------Micro-----------M11 ------------Micromax----------GC255 M2 Q1 Q1+ Q2 Q3 Q5 Q50 Q55 Q6 Q7 Q75 Q80 X112 X113 X114 X115 X116 X117 X118 X122 X1iX1i+ X1u X200 X211 X212

X215 X220 X225 X226 X228 X230 X235 X250 X260 X262 X263 X265 X266 X280 X285 X2iX2i+ X310 X330 X332 X360 X361 X370 X395 X414 X450 X485 X50 X505 X510 X555 X560 X600 ------------Micxon-----------MTV800 ------------Mideia-----------Y100 ------------Midi-----------MD462 ------------Mikki-----------C90 ------------MingXing-----------A008 ------------Mini-----------6600

8000C i9 iphone N95 8gb N98+ TTK-98 Vertu ------------Mito-----------1868 288GG 302 ------------Mixcon-----------S908 ------------Mobiado-----------105 ------------MOTOROLA----------WX160 WX161 WX180 WX181 WX260 WX260C WX265 WX280 WX288 WX290 WX295 WX390 WX395 ------------MTS-----------MTS 535 ------------ZTE-----------Orange Lima Orange Lisbon T-Mobile E200 Vibe VODAFONE 547 ZTE-G N281 ZTE-G R221 ZTE-G S260 ZTE-G X670 ZTE-G X760 ZTE-G X761 ZTE-G X930

END List from MTK GENERIC PHONES

This list is from MTK RSA Type phones!! ------------ALCATEL-----------F152 505K AMSTERDAM B331 C818 CRYSTAL E101FLIP F115 F121 F122 F123 F331 MISSIXTY2 OT103 OT104 OT105 OT106 OT107 OT108 OT109 OT112 OT113 OT140 OT150 OT203 OT203A OT203E OT204 OT205 OT206 OT208 OT209 OT213 OT214 OT214W OT216 OT222 OT223

OT228 OT250 OT252 OT262 OT280 OT282 OT292 OT300 OT301 OT303 OT304 OT305 OT306 OT308 OT310 OT311 OT312 OT315 OT315M OT352 OT355 OT355D OT356 OT360 OT361 OT362 OT363 OT380 OT383 OT385 OT385J OT390 OT455 OT505 OT505K OT506 OT506D OT507 OT508 OT510 OT530 OT540 OT543 OT555

OT565 OT565K OT585 OT600 OT602 OT606 OT608 OT650 OT660 OT665 OT706 OT708 OT710 OT799 OT799 OT800 OT802 OT802Y OT803 OT803D OT806 OT806D OT807 OT808 OT808G OT809 OT810 OT810D OT813 OT813D OT813F OT818 OT819 OT828 OT838 OT870 OT880 OT888 OT90 OT900 OT900 OT901 OT902 OT905

OT907 OTA919 OTC819D OTT66 OTTEST Q5 S by SFR 3440 S122 SFR115 SFR1150 SFR121 SFR122 SFR123 T268 TCL-I802 TCL-I806 TCL-I806D TCL-I880 TCL-I898 TCL-I900 TCLI905 TCL-Q3 TCL-T208 TCL-T218 TCL-T255 TCL-T355 Text Ed 152 by SFR T-Mobile Accord Virgin VM202 Virgin VM665 VM621I VM800 ------------MOTOROLA-----------WX160 WX161 WX180 WX181 WX260 WX260C WX265 WX280 WX288 WX290 WX295

WX390 WX395 ------------VODAFONE-----------VODAFONE150 VODAFONE155 VODAFONE250 VODAFONE252 VODAFONE331 VODAFONE331FM VODAFONE345 VODAFONE350 VODAFONE354 VODAFONE355 VODAFONE455 VODAFONE540 VODAFONE541 VODAFONE543 VODAFONE555 End List from RSA Those are list which is Supported models for unlock and repair imei but you can still unlock and repair imei of that models which are not listed above.

iPhone How to check iPhone Carrier/Operator using Volcano Box? Checking iPhone Carrier/Operator service is free in the Volcano Box yet. For this, you must have internet connection. Follow the way to check the iPhone Carrier: 1. Open the Volcano Box software in “Tool” interface 2. Click on “iPhone Check”.

3. Fill the desire IMEI in “IMEI” New Windows 4. Click “Check” 5. Wait for a second to get the result.

That’s All.

How to unlock iPhone using Volcano Box? You have to follow the steps to unlock iPhone using device imei from Volcano Box. 1. Open the Volcano Box Software in any (MTK, SPD etc.) interface 2. Click on “Unlock by IMEI” 3. Now, Browser leads you to FURIOUS TEAM web site “http://oneunlock.com” known as ONEUNLOK.COM 4. Register and fill the credit that you need. (Registration is free here.) 5. Of course you can order your code any time.

That’s All.

hTC How to unlock HTC Phones using Volcano Box? 1- Make sure you have “ActiveSync” installed on your computer. 2- Click on “SDA Application” to unlock & perform it. 3- After SDA Application unlock, Select Correct phone model. 4- Connect USB cable to the phone. 5- Wait until connect to ActiveSync is established. 6- Press “Calculate”. 7- Check and follow instructions on your HTC phone's display. 8- Confirm if any request on the screen. 9- Wait few seconds for your code to appear. Enjoy.

Supported models HTC QUALCOMM based processor phones: Diamond Iolite Jade Jump Kaiser Mega Niki

Polaris Quartz Rhodium Topaz Wings Rose HD2 (old firmware)

ZTE How to unlock ZTE Phones with Volcano Box 1- Put Mobile into “FTM mode” 2- After FTM mode, insert Original USB cable mobile to the computer. 3- Install Drivers (Drivers can found from install folder Drivers\Zte Unlock Drivers\ZTE_Handset_USB_Driver) 4- In device manager you can see installed Diagnostic Com port of ZTE phone with name “Zte handset diagnostic interface (DFU) “ 5- Open Volcano software 6- Go to “ZTE” Interface (Tab) 7- Select “Com port of ZTE handset diagnostic interface (DFU)” 8- Tick “Unlock” 9- Press “RUN”

10- Your phone is unlocked!! That’s All. Note: Keep in mind we can unlock almost all ZTE Qualcomm phones which can be enter into FTM mode!

How to enter FTM mode? 1. Power off phone 2. Take Battery out of the mobile 3. Insert Battery to the mobile again 4. Press & Hold “Volume down and Power button” together till mobile comes into FTM mode

Supported Models: * Blade * SanFransisco * SanFransisco II * Skate * Monte Carlo * Vivacity * T-Mobile Vivacity * Star Trail * Star Addict * Soft Stone * T28 * Tureis * Turksell T1 * V852 * V859 * V875 * V880 * V880+ * V960 * Vodafove 945 * X60 * X850 * X876 * Z990

* Amigo * Moister Class * V170 AUSTRIA * Global Z3 * Smart Net phone 701 * A5 * N61 * XCD 35 * P726G * P729V * P729B * P733N * P733K * P733T * Racer * Rio * Rio II * Carl * E400 * E821S * Libra * Link * ZTE Roamer * ZTE RTK D1 * Moister Link * Moister Prime * Moister Class * Moister Link * Moister Prime * SmartFren Wide * Net phone 701

HUAWEI PHONES How to unlock HUAWEI U Series Phone with Volcano Box 1. Open the Volcano Software in “Tool” Interface 2. Click on “Huawei U Series”

3. Choose the “Product” from drop down List 4. Remove Micro SD Card from the phone. 5. Check battery level (it's important, without battery phone can't connect to PC) 6. Remove battery from phone for 5 second and then replace it back to the Phone. 7. Connect Phone to USB and put phone in FAST BOOT MODE Note: 1. Make sure it is in real Fast Boot Mode and other mode will Kill signal on phone) then let it install drivers, if driver conflict will not work ok). Fast Boot Notice (if keep pressed for 5sec and it s stuck on clepsydra or Logo but not recognized correctly, you need to keep it pressed for 5 more seconds. 2. Phone will hang on white screen with little circle in the middle or on logo = that is fast boot. Pc will recognize as Android Sooner Single ADB interface

8. Click on “Unlock”. That’s All

How to put Phone with Fast Mode U8230: Remove phone battery for 5 seconds and put it back. Press "Vol -" + "Red (End call)" and Power buttons. Hold the buttons pressed until your phone completely hangs. (5sec or more) Connect your phone to computer and install driver and wait until driver installation complete. Check in Device manager if drivers installed ok.

U8350: Remove phone battery for 5 seconds and put it back. Press "Vol -" + "Red (End call)" and Power buttons. Hold the buttons pressed until your phone completely hangs. (5sec or more) Connect your phone to computer and install driver and wait until driver installation complete. Check in Device manager if drivers installed ok.

U8500: Remove phone battery for 5 seconds and put it back. Press "Vol -" + "Red (End call)" and Power buttons. Hold the buttons pressed until your phone completely hangs. (5sec or more) Connect your phone to computer and install driver and wait until driver installation complete. Check in Device manager if drivers installed ok.

U8510: Remove phone battery for 5 seconds and put it back. Press "Vol -" and Power buttons. Hold the buttons pressed until your phone completely hangs. (5sec or more) Connect your phone to computer and install driver and wait until driver installation complete. Check in Device manager if drivers installed ok.

U8650: Remove phone battery for 5 seconds and put it back. Press "Vol -" and Power buttons. Hold the buttons pressed until your phone completely hangs. (5sec or more) Connect your phone to computer and install driver and wait until driver installation complete. Check in Device manager if drivers installed ok.

U8220:

Remove phone battery for 5 seconds and put it back. Press "Vol -" + "Red (End call)" and Power buttons. Hold the buttons pressed until your phone completely hangs. (5sec or more) Connect your phone to computer and install driver and wait until driver installation complete. Check in Device manager if drivers installed ok.

U8180: FAST BOOT entering info for U8180 Remove phone battery for 5 seconds and put it back. Press "Vol -" + "Menu" and Power buttons. Hold the buttons pressed until your phone completely hangs. (5sec or more) Connect your phone to computer and install driver and wait until driver installation complete.

U8160: Remove phone battery for 5 seconds and put it back. Press "Vol -" + "Red (End call)" and Power buttons. Hold the buttons pressed until your phone completely hangs. (5sec or more) Connect your phone to computer and install driver and wait until driver installation complete. Check in Device manager if drivers installed ok.

u8150: Remove phone battery for 5 seconds and put it back. Press "Vol -" + "Red (End call)" and Power buttons. Hold the buttons pressed until your phone completely hangs. (5sec or more) Connect your phone to computer and install driver and wait until driver installation complete. Check in Device manager if drivers installed ok.

huawei 858 / Voda 858: FAST BOOT entering info for HUAWEI858 Remove phone battery for 5 seconds and put it back. Press "Vol -" and Power buttons. Hold the buttons pressed until your phone completely hangs. (5sec or more) Connect your phone to computer and install driver and wait until driver installation complete.

HUAWEI DATA CARD (Modems) How to Unlock Huawei Modems With Volcano Box?

1. Connect the Huawei Modem to the computer 2. Now, Computer begins to install its necessary driver. 3. Wait until Huawei Modem makes its own “Diagnostic Port” 3. Open the Volcano Software in "Tool" Interface (Tab) 4. Click on "Huawei Modem" 5. Choose the "Model" from Drop-Down List 6. Choose the “Diagnostic Port" that modem is using right this time. 7. Choose the "Huawei Old Security" or "Huawei New Security" as necessary

8. Click "Direct Unlock" 9. Wait until the operation is completed.

That't All

CDMA How to Read Info of CDMA Device with the help of Volcano Box ? Follow the steps to get the information of the CDMA Device: 1- Open the Volcano Software “CDMA” Interface (Tab) 2- Select “Brand” from Drop-Down List

3. Choose “Models” from Drop-Down list

4. Select your “phone Diagnostic Port” or “rj45 interface port”. 5. Tick on “Read CDMA info” 6. Click on “RUN” 7. Wait; until the Operation is completed. If all is okay; then, you can see meid/esn model and build Like this: CDMA Reading Phone Info... Phone Found... Phone DATE: Jul 16 2010

Phones build 010-RD3550-.... Meid: A1111111111222 ESN = 807C51D8 CDMA Reading info finish. That’s All

How to repair ESN/MEID with the help of Volcano Box? 1- Open the Volcano Software “CDMA” Interface (Tab) 2- Select “Brand” from Drop-Down List 3. Choose “Models” from Drop-Down list 4. Select your phone “Diagnostic Por”t or “rj45 interface Port”.

5. Tick on “Repair MEID/ESN” 6. Fill the Required “MEID/ESN” on the Box 7. Change the “Baud Rate” if necessary 8. Click on “RUN” 9. Wait; until the Operation is completed. That’s All.

How to Unlock CDMA Mobile with the help of Volcano Box? 1- Open the Volcano Software “CDMA” Interface (Tab) 2- Select “Brand” from Drop-Down List 3. Choose “Models” from Drop-Down list 4. Tick on “Unlock Code”

5. Select your “phone Diagnostic Port” or “rj45 interface Port”. 6. Change the “Baud Rate” if necessary 7. Click on “RUN” 8. Wait; until the Operation is completed.

That’s All.

How to find user Code of Qualcomm CDMA Mobile with the help of Volcano Box? 1- Open the Volcano Software “CDMA” Interface (Tab) 2- Select “Brand” as “Qualcomm CDMA” from Drop-Down List 3. Choose “Models” from Drop-Down list 4. Tick on “Unlock Code” 5. Select your “phone Diagnostic Port” or “rj45 interface Port”. 6. Change the “Baud Rate” if necessary 7. Click on “RUN” 8. Wait; until the Operation is completed.

That’s All. For More Detail, Check the Link: http://www.youtube.com/watch?v=buz2CdmxPd0

How to find user Code of Samsung CDMA with Volcano Box? 1- Open the Volcano Software “CDMA” Interface (Tab) 2- Select “Brand” as “Samsung CDMA” from Drop-Down List 3. Choose “Models” from Drop-Down list

4. Tick on “Unlock Code” 5. Select your “phone Diagnostic Port” or “rj45 interface Port”. 6. Change the “Baud Rate” if necessary 7. Click on “RUN” 8. Wait; until the Operation is completed.

Samsung How to make Any UART & Ignition CABLE with the help of Volcano Box? You can make any UART Cable or any Ignition cable for Samsung, LG etc. with the help of Volcano Box. Volcano Box gives required resistance value and helps to make two cables short from the software. You can short any pin to Ground by the function of the Volcano Box. For example, you need to make Samsung C3303K Uart cable. Check the Original cable of C3303K Uart that is available to buy in the market.

This Picture clearly tells that the Original Cable of C3303K has 5 pins: 1-VCC 2-RX 3-TX 4- Pin 4 shorts with pin 5 with 510k Resistor 5- GND Now, we will make same Cable with the help of the Volcano Box function like this:

As Original Cable, Pin number 1 is VCC so we Pick up VCC to 01 pin, Pin number 2 is RX in original Cable, so we pick up RX and drop down to 02 Pin, Pin number 5 is GND in the Original Cable, so we Drag GND to 05, Pin number 4 is short with Pin number 5 with 510k Resistance in the original cable, so we Drag REA to 04, and REB to 05. Because REA and REB has Specific Resistance Value (In this Case 510K) between Pin 4 and Pin 5. NOTE: If you want to do direct Short, then, you must use SEA and SEB instead of REA and REB. To say more clearly,

9. Drag and Drop VCC to pin number 1 10. Drag and Drop RX to pin number 2 11. Drag and Drop TX to pin number 3 12. Drag and Drop REA to pin number 4 13. Drag and Drop GND to pin number 5 14. Drag and Drop REB to pin number 5 15. Set Resistance Value 510K 16. Click on set Pinout

Now, you are ready to flash or unlock with other box that is used this Pinout with Volcano Box.

In this picture, we can see S5610 Read Info done by Z3X Samsung Box with the help of Volcano Uart Cable :))

How to do this? 8. Volcano Box Com Port is other software Com Port. So, if the Volcano Box com Port is 53, then, the Z3X Box Com Port must be 53. If the Volcano Box using Device Com Port, then, the Z3X COM Port must be Device COM Port. 9. Let, the Join Volcano Box with the Computer but do not connect Main Cable to the volcano Box yet. (Remember your mobile must connect with the Main Cable and the Cable not connecting with the Volcano Box yet.) 10. Click on “Read Info” from Z3X Box 11. When the Z3X software ask you to connect the Cable, then, Connect Volcano Main

Cable with the Volcano Box. 12. Press and hold Power Button of the Mobile for few seconds. 13. Wait until Operation is completed. That’s all. This is an example of Samsung C3303K cable... you can make any other cable such as Samsung S7070, Samsung i9250 etc... No need to buy more cables if you have Volcano box in your Service Center.

How to Read Info of Sam. Og. Mobile With the help of Volcano Box? 1. Power ON the Mobile with the Battery 2. Type *#9090# Or *#197328640#

for Qualcomm mode

3. Connect the Mobile with “Micro USB CABLE” (Nokia 5310 cable) to the Computer 4. Let the Device (Mobile) Install Required Driver or Install it manually. (Note: You will find the Driver on this location: C:\Program Files\Volcano Team\VolcanoBox\Drivers\Samsung Phone Drivers) 5. Open Volcano Software in "Samsung" Interface (Tab) 6. Choose the "Model" from drop down list 7. Tick on "Read Info" button 8. Select Mobile Diagnostic COM Port using Volcano Software

9. Click on "RUN" 10. Wait until the operation is completed.

That's All.

How to Unlock Samsung Origional Mobile? You can unlock Samsung Original Mobile following ways

1. Power ON the Mobile with the Battery 2. Type *#9090# Or *#197328640#

for Qualcomm mode

3. Connect the Mobile with “Micro USB CABLE” (Nokia 5310 cable) to the Computer 4. Let the Device (Mobile) Install Required Driver or Manually Install it (Note: You will find the Driver on this location: C:\Program Files\Volcano Team\VolcanoBox\Drivers\Samsung Phone Drivers) 5. Open Volcano Software in "Samsung" Interface (Tab) 6. Choose the "Model" from drop down list 7. Tick on "Unlock" button 8. Select Mobile Diagnostic COM Port from Volcano Software

9. Click on "RUN" 10. Wait until the Operation is completed.

That's All You can also unlock mobile with ADB and Rooting method.

How to Format Samsung Mobile with Volcano Box? Format will erase user data and makes the device to the Factory Default. Sometimes, you need to format the device (mobile) before unlock it. You can format Samsung Mobile following ways: 1. Power ON the Mobile with the Battery 2. Connect the Mobile with “Micro USB CABLE” (Nokia 5310 cable) to the Computer 3. Let the Device (Mobile) Install Required Driver or install it manually. (Note: You will find the Driver on the following location in case of windows XP: C:\Program Files\Volcano Team\VolcanoBox\Drivers\Samsung Phone Drivers) 4. Open Volcano Software in "Samsung" Interface (Tab) 5. Choose the "Model" from drop down list 6. Tick on "Format" button 7. Select Mobile Diagnostic COM Port from Volcano Software 8. Click on "RUN" 9. Wait until the Operation is completed.

That's All You can also do with ADB and Rooting method.

How to Pattern Unlock (Samsung Origional Mobile)? 1. Power ON the Mobile with the Battery 2. Connect the Mobile with “Micro USB CABLE” (Nokia 5310 cable) to the Computer 3. Let the Device (Mobile) Install Required Driver or Install it manually. (Note: You will find the Driver on the following location: C:\Program Files\Volcano Team\VolcanoBox\Drivers\Samsung Phone Drivers) 4. Open Volcano Software in "Samsung" Interface (Tab) 5. Choose the "Model" from drop down list 6. Tick on "Pattern Unlock" button 7. Select “Mobile Diagnostic COM Port” from Volcano Software 8. Click on "RUN" 9. Wait until the Operation is completed.

That's All NOTE: Sometimes you need GT-C-3300K Cable with Other Box Diagnostic Com Port.

How to Un-Root (Samsung Origional Mobile)?

1. Connect the Rooted Device to Computer with the help of USB Cable (Nokia 5310 cable). 2. Open Volcano Software in "Samsung" Interface (Tab) 3. Choose the "Model" from drop down list 4. Tick on "UnRoot" button 5. Select Mobile Diagnostic COM Port Volcano Software 6. Click on "RUN" 7. Wait until the operation is completed. That's All.

How to Restore EFS (Samsung Origional)? 1. Power ON the Mobile with the Battery 2. Now, go to "Setting-->Application-->>Development-->> and Tick "USB Debugging" 3. When the Device ask "Allow USB Debugging", Click on "YES" 4. Connect the Mobile with “Micro USB CABLE” (Nokia 5310 cable) to the Computer 5. Let the Device (Mobile) Install Required Driver or Install it manully. (Note: You will find the Driver on the following location: C:\Program Files\Volcano Team\VolcanoBox\Drivers\Samsung Phone Drivers) 6. Now, root your mobile using Rooting software. 7. Open Volcano Software in "Samsung" Interface (Tab) 8. Choose the "Model" from drop down list 9. Tick on "EFS Restore" button 10. Select “Mobile Diagnostic COM Port” from Volcano Software 11. Click on "RUN" 12. Choose the Backed up EFS from the Computer Which has extension " *.volog" 13. Wait until the Operation is completed. That's All Note: Only ADB Unlock backup the EFS file. So that user can restore the EFS file if something happens like imei damage etc.

Sony Ericsson Where should we get Mobile Driver for Sony Ericsson (Xperia Series)? Go to the inside of Volcano setup folder, you will find the driver on the following location

if you are working in XP interface: C:\Program Files\VolcanoBox\Drivers\SonyXperia On the following location, you will see: 1. Non_TP_Drivers and 2. TP_Drivers Non_TP_Drivers: The drivers for those mobiles which are direct unlock with USB Cable. TP_Drivrs: The drivers for those mobiles which are not possible direct unlock only with Driver. You must use Test Point Operation which needs little bit skills. Where should we get unlock help of Sony Ericsson (Xperia Series)? 1. Open the Volcano Box Software.

2. Click on "Xperia" Tab 3. Click on "Help" 4. Now, you will see the help manual over here as shown above :))

Which models are Supported to unlock by Volcano box? The following models are supported to unlock by Volcano Box: 1. Xeperia X10 2. Xeperia X10i 3. Xeperia X10a 4. Docome SO-01B 5. Xperia X10 mini : E10i 6. Xperia X10 mini Pro : U20 7. Xperia X8 : E15i 8. Xperia W8 : E16, E16i 9. Xperia Arc : LT15 10. Xperia Pro : MK16 11. Xperia Neo V : MT15 12. Xperia Play : R800 13. Xperia Mini Pro : SK17 14. Xperia Mini : ST15 15. Xperia Active : ST17 16. Xperia Ray : ST18 17. Walkman : WT19 18. Xepria Play : Z1 19. Xperia Ray : SO-03C 20. Xperia Mini : S51SE 21. Xperia Arc S : LT18

Consider before starting Unlock Process What you have to think before start to unlock Xperia Series by Volcano Box are: 1. Check the firmware version: Mobile firmware must be 2.1 or higher. If the mobile firmware version is lower than 2.1 Version, then, you need to flash the device with 2.1 or higher firmware version. 2. Best Operating System: The best operating System to unlock Xperia series is XP. If your system is Vista or Windows 7, then, you need administrative pravellage to run volcano box. For this, Right click Volcano Box icon and select as "run as administrator". 3. Disable your Antivirus or firewall before starting unlock process. Sometimes, Antivirus or Firewall can delete important files and also hangs while unlocking or detecting ADB devices at the time of unlocking. So better disable those kinds of firewalls and re-install the application (Volcano Box Software) again if you think antivirus already deleted some data.

4. Before you start unlocking process, better you Plug the device (Mobile) with USB Cable and install the driver previously. You will find the driver on the following location in case of Windows XP: C:\Program Files\VolcanoBox\Drivers\SonyXperia on the following location, you will see : 1. Non_TP_Drivers and 2. TP_Drivers If your mobile is related to TP (Test Point), then, install the Driver from "TP_Driver" folder and if this is not related with TP, then, you have to install it from "Non_TP_Drivers" folder. 5. Please Remove the Sim card from the Phone but do not remove the Memory Card. Leave it on the Phone. 6. Make sure Device (Mobile) Should not be Rooted and Device doesn't have custom rom on it. 7. Make sure the USB “Debuggin Mode” is Enable 8. Make sure Internet connection is good. 9. You must have knowledge about Test Point. So, search the TEST Point picture before you start unlocking. Now you can start to unlock Xperia series. Good Luck!!!

Some Test Point (TP) picture of the Xperia Seria of Sony Ericsson 1. Xperia LT15 Test Point Picture

2. Xperia LT18 Test Point

3. Xperia MK16 Test Point

4. Xperia MT11 Test Point

5. Xperia MT15 Test Point

6. Xperia R800 Test Point

7. Xperia SK17 Test Point

8. Xperia SO-02C Test Point

9. Xperia ST15 Test Point

10. Xperia ST17 Test Point

11. Xperia ST18 Test Point

12. Xperia WT19 Test Point

How to Unlock Xperia Series that is supported by Volcano Box Follow the steps to unlock any xperia series: 1. Open the Volcano Box Software 2. Now, click on "Xperia" Tab 3. Choose the Model from Drop Down list as shown below:

4. Click on "Get info" 5. Make sure Phone Should be off. Power Off the Device i.e. Phone. Press and hold Back Button of the mobile. 6. Now, insert USB Cable to the computer. 7. Let the computer install required driver. You can also choose driver manually. You will find the driver on the following location in case of Windows XP: C:\Program Files\VolcanoBox\Drivers\SonyXperia On the following location, you will see:

1. Non_TP_Drivers and 2. TP_Drivers If your mobile is related to TP (Test Point), then, install the Driver from "TP_Driver" folder and if this is not related with TP, then, you can install it from "Non_TP_Drivers" folder. 8. If everything is OK, you will see the information of your device (Mobile) on the Volcano Screen. 9. Now, what is next, Plug Out USB Device and Re-install the Battery of the device 10. Tick “2.3 android version” if the device has exactly 2.3 android version otherwise un-tick it 11. Click on "Unlock" Button 12. Press and hold Back Button of the mobile and insert USB Cable to the computer.

13. Your Phone is unlocked.

That's All.

Note: If your phone shows NO NETWORK after Unlocking , remove the battery and insert it again after 1 minute.

Volcano Box supported CPU & Phone list

MTK Supported CPU MTK6253DVN MTK6515 MTK6217 MTK6252 MTK6218 MTK6219 MTK6223 MTK6225 MTK6226 MTK6227 MTK6228 MTK6229 MTK6230 MTK6235 MTK6238 MTK6239 MTK6268 MTK6516 MTK6573 MTK6250 MTK6253 MTK6236

MTK6251 MTK6255 MTK6575 MTK6577 MTK625A/0DA MTK6276

SPD Supported CPU SC6600D SC6600M SC6600E SC6600I SC6600L1 SC6600L2 SC6600L3 SC6600RT WT6226A SC6600R SC6600H SC6800 SC8800D SC8800S SC6600R2 SC6600H3 WT6228 SC6610/20 SC6800H SC8800H SC6800H SC6530 SC8800G SC8801G

Mstar Supported CPU MSW8533 MSW8533C

MSW8528 MSW8535 MSW8538 MSN8533N MSN8533D MSW8532B MSW8533B MSW8532B2 MSW8532

W Supported CPU W9000

Coolsand Supported CPU CT1129 CT1131 CT1128 CT8852C CT8852D CT8853A CT8853B CT1123 CT1130

Coolsand RDA CPU RDA8853A RDA8853B RDA8852

Samsung (Original Phones)

S5660V S5660M S5660L S5660 I5500 I5503 I5800 I717 I717M I727 I727R S5830 T499 T679 T898 T898D I900 I8350 I900L S5570 I5801 I5503T B7320 M110 7510 I8320 GT‐B7320 GT‐I8150 GT‐I5700 SGH‐I617 SGH‐I917 SGH‐I637 GT‐B7330 SGH‐I600 SGH‐I607 GT‐B6520 GT‐S5670 i6410 GT‐I6500U GT‐I6500 GT‐I8510C GT‐I7110 GT‐I8330

GT‐I8510 GT‐I8520 GT‐I7500 GT‐I8700 S6500D S6500 SGH‐I747 GT‐I9000 GT‐I9100 GT‐I9300 GT‐N7000 GT‐P1000 GT‐P7500 GT‐S5300 SGH‐I777 SGH‐I896 SGH‐I897 SGH‐SC‐02D SGH‐T759 SGH‐T769 SGH‐T839 SGH‐T859 SGH‐T959 SGH‐T999 I9003 I9008 I9010 I9020 I9023 I9088 I9100G I9100P I9103 I9108 I9188 P6200 P6800 P7100 P7300 P7320 P7500 T849 GT‐B7510L

ZTE (Original Phones) Blade SanFransisco SanFransisco II Skate Monte Carlo Vivacity T‐Mobile Vivacity Star Trail Star Addict Soft Stone T28 Tureis Turksell T1 V852 V859 V875 V880 V880+ V960 Vodafove 945 X60 X850 X876 Z990 Amigo Movistar Class V170 AUSTRIA Global Z3 Smart Netphone 701 A5 N61 XCD 35 P726G P729V P729B P733N P733K P733T

Racer Rio Carl E400 E821S Libra Link ZTE Roamer ZTE RTK D1 Movistar Link Movistar Prime Movistar Class Movistar Link Movistar Prime SmartFren Wide Netphone 701

Alcatel (Original Phones) AMSTERDAM B331 C818 F115 F121 F122 F123 F152 F331 MISSIXTY2 OT103 OT104 OT105 OT106 OT107 OT108 OT109 OT112 OT113 OT140 OT150 OT203 OT203A

OT203E OT204 OT205 OT206 OT208 OT209 OT213 OT214 OT214W OT216 OT222 OT223 OT228 OT250 OT252 OT262 OT280 OT282 OT292 OT300 OT301 OT303 OT304 OT305 OT306 OT308 OT310 OT311 OT312 OT315 OT315M OT352 OT355 OT355D OT356 OT360 OT361 OT362 OT363 OT380 OT383 OT385 OT385J OT390

OT455 OT505 OT505K OT506 OT506D OT507 OT508 OT510 OT530 OT540 OT543 OT555 OT565 OT585 OT602 OT606 OT608 OT650 OT665 OT706 OT708 OT710 OT799 OT799 OT800 OT802 OT802Y OT803 OT803D OT806 OT806D OT807 OT808 OT808G OT809 OT810 OT810D OT813 OT813D OT813F OT818 OT819 OT828 OT838

OT870 OT880 OT888 OT90 OT900 OT900 OT901 OT902 OT905 OT907 OTA919 OTC819D OTT66 OTTEST Q5 S by SFR 3440 S122 SFR115 SFR1150 SFR121 SFR122 SFR123 T268 TCL‐I802 TCL‐I806 TCL‐I806D TCL‐I880 TCL‐I898 TCL‐I900 TCLI905 TCL‐Q3 TCL‐T208 TCL‐T218 TCL‐T255 TCL‐T355 Text Ed 152 by SFR T‐Mobile Accord Virgin VM202 Virgin VM665 VM800 VODAFONE150 VODAFONE155 VODAFONE250 VODAFONE252

VODAFONE331 VODAFONE331FM VODAFONE345 VODAFONE350 VODAFONE354 VODAFONE355 VODAFONE455 VODAFONE540 VODAFONE541 VODAFONE543 VODAFONE555 WX160 WX161 WX180 WX181 WX260 WX260C WX265 WX280 WX288 WX290 WX295

HUAWEI U SERIES (Original Phones) U8150 U8160 U8180 U8220 U8230 U8300 U8350 U8500 U8510 U8510 U8650 U8652 VODAFONE 858 HUAWEI 858 IDEOS

Fusion X1 X3 SFR StarShine ‐ STAR Tune

HUAWEI (Original Modems) E156 E155 E1550 E1552 E156G E160 E160G E161 E166 E169 E169G E170 E172 E176 E1762 E180 E182E E196 E226 E270 E271 E272 E510 E612 E618 E620 E630 E630+ E660 E660A E800 E870 E880 EG162

E880 EG162 EG162G EG602 EG602G B260a E122 E153 E1551 E1553 E155X E156B E156C E1609 E160E E160X E1612 E1615 E1616 E1630 E1632 E166G E1690 E1692 E170G E171 E172G E173 E1750 E1750C E1752 E1756 E176G E1803 E180G E180S E181 E182 E1820 E216 E219 E230 EM770 S4011

UMG1691 HUAWEI E 353Ws HUAWEI E353Ws‐2 HUAWEI E398 HUAWEI E1732 HUAWEI E173 HUAWEI E352 HUAWEI E353 HUAWEI E353Ws HUAWEI E353Ws‐2 HUAWEI E357 HUAWEI E362 HUAWEI E367 HUAWEI E372 HUAWEI E368 HUAWEI E398 HUAWEI E1732 HUAWEI E392 HUAWEI E1815 HUAWEI E1731 Vodafone K4510 Vodafone K4511 Vodafone K4605 Vodafone K5005

HUAWEI G SERIES (Original Phones) G5500with Cable G5510with Cable G6600with Cable G6603with Cable G6609with Cable G7050with Cable G7105with Cable G7300with Cable KNPTouch withCable T‐Mobileenergy withCable VM820Cable G3501with Imei G5010with Imei

G5726with Imei G6005with Imei G6210with Imei G6605with Imei G6608with Imei G6620with Imei G6622with Imei G7002with Imei G7210with Imei G7510with Imei G7600with Imei MobistarOndaI with mei Panamawith Imei VM720with Imei G20with Imei Panama CUwith Imei

HTC Qualcomm (Original Phones) Wings Polaris Kaiser Niki Diamond Blackstone (HD) Raphael (Pro) Rose Iolite Jade Topaz Rhodium Mega Quartz HD2 (old Firmware)

CDMA (Origional Mobile) Samsung CDMA SCH-A570 SCH-A670 SCH-A930 SCH-B139 SCH-B259 SCH-i100 Gem SCH-i225 Exec SCH-i400 Galaxy S Continuum SCH-i500 Galaxy S Fascinate SCH-I535 SCH-i600 SCH-i770 Saga SCH-i800 Galaxy Tab U.S. Cellular SCH-i800 Galaxy Tab Verizon SCH-i910 Omnia SCH-i920 Omnia II SCH-N380 SCH-R100 SCH-R200 SCH-R210 SCH-R211 SCH-R260 SCH-R261 SCH-R270 SCH-R300 SCH-R311 Axle US Cellular SCH-R330 USCC SCH-R350 Freeform SCH-R351 Alltel SCH-R351 Bell SCH-R351 Uscellular SCH-R360 Freeform II SCH-R380 Freeform III SCH-R390 SCH-R400 SCH-R430 Cricket SCH-R470 SCH-R500 SCH-R510 Alltel

SCH-R510 Wafer Pelephone SCH-R520 SCH-R530U US Cellular SCH-R550 JetSet SCH-R570 Metro Pcs SCH-R580 USCC SCH-R600 SCH-R610 SCH-R630 Messager Touch SCH-R680 SCH-R710 Cricket SCH-R720 Cricet SCH-R720 MetroPCS SCH-R760 SCH-R800 SCH-R850 Caliber SCH-R880 Acclaim SCH-R920 MetroPCS SCH-S179 SCH-S219 SCH-U209 SCH-U340 SCH-U340 Pelephone SCH-U350 Alltel SCH-U350 Verizon SCH-U360 Gusto SCH-U365 Gusto 2 Verizon SCH-U410 VZW SCH-U450 SCH-U450 Koodo SCH-U460 SCH-U470 Juke SCH-U490 SCH-U540 SCH-U550 SCH-U620 SCH-U640 Convoy SCH-U650 SCH-U740 SCH-U820 SCH-U960 SCH-V740 SCH-W619 SCH-W629 SHW-M250L Galaxy S2 SPH-A303

SPH-A503 SPH-A560 SPH-A580 SPH-A610 SPH-A620 SPH-A640 SPH-A660 SPH-A680 SPH-A840 SPH-A840 SPH-A900 SPH-A900 SPH-A920 SPH-D600 Conquer 4G SPH-D700 Galaxy S Epic 4G SPH-D710 Galaxy S2 Epic Touch 4G SPH-D720 Nexus S SPH-i325 Ace SPH-i350 Intrepid SPH-L710 Galaxy S3 SPH-L900 Galaxy Note II SPH-M220 SPH-M230 SPH-M300 SPH-M305 Disney Mobile SPH-M320 SPH-M330 SPH-M350 SPH-M380 SPH-M500 SPH-M500 RUS SPH-M510 SPH-M520 SPH-M540 Rant SPH-M550 SPH-M560 SPH-M570 SPH-M580 Replenish SPH-M610 SPH-M620 UpStage SPH-M630 SPH-M800 Instinct SPH-M810 Instinct s30 SPH-M820 Galaxy Prevail

SPH-M850 Instinct HD SPH-M900 Moment SPH-M910 Intercept Sprint SPH-M910 Intercept Virgin Mobile SPH-M920 Transform SPH-M930 Transform Ultra SPH-P100 Galaxy Tab SPH-Z400

LG CDMA 630 820 AX-145 AX-260 Rumor AX-380 AX-390 AX-585 AX-830 Glimmer CD-3600 GB102 HD-5330 ID-3000 LGC-330W LN-240 LN-510 Rumor Touch LS-670 Optimus S LS-696 Optimus Elite LS-840 Viper 4G LTE LS-855 LSI-110 Reliance LSI-120 Wifone LSP-345 LSP-400 LSP-430T LSP-450T LST-270T LX-1200 LX-125 LX-150 LX-160 LX-260 Rumor

LX-265 Rumor 2 Sprint LX-290 LX-370 LX-400 LX-550 Fusic LX-570 Muziq LX-600 Lotus LX-610 Lotus MD-3600 MN-180 MS-690 Optimus M MS-695 Optimus M+ MS-770 Motion 4G MS-910 Esteem RD-2430 RD-2530 SD-1200 SD-1250 SP-110 SV-590 Chocolate TD-636 TD-636 TM-510 TP-5250 UN-200 Saber UN-510 Banter Touch US-740 US-760 UX-265 Rumor 2 UX-280 UX-300 UX-310 UX-390 UX-700 UX-830 Glimmer UX-840 Tritan V-111 VL-600 VN-150 VN-271 VS-660 Vortex VS-740 VS-750 Fathom VS-910 Revolution 4G

VS-920 Spectrum VX-1000 Migo VX-11000 enV Touch VX-3200 VX-5300 VX-5400 VX-5500 VX-5600 Accolade VX-6000 VX-6100 VX-7000 VX-7100 Glance VX-8100 VX-8300 VX-8350 VX-8500 Chocolate VX-8550 Chocolate 2 VX-8575 Chocolate Touch VX-8600 Chocolate Flip VX-8700 Shine VX-8800 Venus VX-9000 VX-9100 enV2 VX-9200 enV3 VX-9600 Versa VX-9700 Dare This is BETA update, If you found any bug or error during repair MEID/ESN please report us. as well as if you found any unsupported phone please contact us.

Online Support International support site :‐>> http://forum.gsmhosting.com/vbb/f723/ http://forum.gpgindustries.com/forumdisplay.php/143‐Volcano‐Box‐Powered‐by‐Furious‐Team Official support site :‐>> http://www.furiousgold.com/products_descriptions/100053 Video of PB Tool :‐>> http://www.phoneblank.com/gallery/video Reseller Network:‐>>http://www.volcano‐box.com/resellers.html Volcano Latest News :‐>> http://www.gpgindustries.com/news/category/gpgindustries‐products/volcano/

VOCLANO MANUAL BY

Dipendra Pathak 935/20, Samakhusi Marg, Kathmandu, Nepal Emails: [email protected] [email protected] Skype: Sairam_mobile Sonork: 100.1593052 Cell: +977‐9841231675