Test Bank Cost Accounting 6e by Raiborn and Kinney Chapter 4
Short Description
ljhoih...
Description
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
CHAPTER 4--Job Order Costing LEARNING OBJECTIVES
LO 1 LO 2 LO 3 LO 4 LO 5 LO 6 LO 7 LO 8
How do job order and process costing systems as well as their related valuation methods differ? What constitutes a “job” from an accounting standpoint? What purposes are served by the primary documents used in a job order costing system? What journal entries are used to accumulate costs in a job order costing system? How do technological changes impact the gathering and use of information in job Order costing systems? How are standard costs used in a job order costing system? How does information from a job order costing system support management decision making? How is spoilage treated in a job-order costing system?
QUESTION GRID True/False Difficulty Level Easy
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
Moderate
x x x x x x x x x x x x x x x x x x x x
Difficult
Learning Objectives LO 1
LO 2
LO 3
LO 4
x x x x x x x x x x x x x x x x x x x x x x x x x x
x x x x x x
99
LO 5
LO 6
LO 7
LO 8
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com Difficulty Level Easy
27 28 29 30 31 32 33 34 35 36 37 38 Completion
Moderate
Difficult
Learning Objectives LO 1
LO 2
LO 5
LO 6
x x x x x x x
Moderate
Difficult
Learning Objectives LO 1
LO 2
LO 3
LO 4
LO 5
LO 6
LO 7
LO 8
x x x x x x x
x x x x x x x x x x x x x x
x x x x x x x x x x x x x
Difficulty Level Moderate
x x x x x x x x x
LO 8
x
x x x x x x
Easy
LO 7
x x x x x x x x x x x
Easy
1 2 3 4 5 6 7 8 9
LO 4
x
Difficulty Level
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Multiple Choice
LO 3
x x x x
Difficult
Learning Objectives LO 1
LO 2
LO 3
LO 4
x x x x x x x x x
100
LO 5
LO 6
LO 7
LO 8
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com Difficulty Level Easy
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57
Moderate
Learning Objectives
Difficult
x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x
LO 1
LO 2
LO 3
LO 4
LO 5
LO 6
LO 7
LO 8
x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x
x x x x
x x x
x x x
x x
x x x x x x x x x x
x x x x x x x x
101
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com Difficulty Level Easy
58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87
Moderate
Learning Objectives
Difficult
LO 1
LO 2
LO 3
x x
LO 4
LO 5
LO 6
LO 7
LO 8
x x x x x x x x x x x x x x x x x x x x x x x x x x x
x x x x x x x x x x x x x x x x x x x x x x x x x x x
x x x
x
Short-Answer Difficulty Level Easy
1 2 3 4 5 6 7
Moderate
x x x x x x x
Difficult
Learning Objectives LO 1
LO 2
LO 3
LO 4
LO 5
LO 6
LO 7
LO 8
x x x x x x x
102
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
Problem Difficulty Level Easy
1 2 3 4 5 6 7 8 9 10 11
Moderate
Difficult
Learning Objectives LO 1
LO 2
x
LO 3
LO 4
LO 5
LO 6
LO 7
LO 8
x x x x x x x x x x
x x x x x x x x x x
x
103
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
TRUE/FALSE 1. A company that produces sugar will use a job order costing system to track production costs. ANS: F
DIF: Easy
OBJ: 4-1
2. A company that produces sugar will use a process costing system to track production costs. ANS: T
DIF: Easy
OBJ: 4-1
3. A company that manufactures custom bridal gowns will use a job order costing system to track production costs ANS: T
DIF: Easy
OBJ: 4-1
4. A company that manufactures custom bridal gowns will use a process costing system to track costs. ANS: F
DIF: Easy
OBJ: 4-1
5. A company that manufactures small quantities of identifiable products will use a job order costing system ANS: T
DIF: Easy
OBJ: 4-1
6. A company that manufactures small quantities of identifiable products will use a process costing system ANS: F
DIF: Easy
OBJ: 4-1
7. A company that manufactures large quantities of homogenous goods will use a process costing system. ANS: T
DIF: Easy
OBJ: 4-1
8. In an actual job order costing system, factory overhead is assigned to a job on a periodic basis. ANS: T
DIF: Easy
OBJ: 4-1
9. A company that manufactures large quantities of homogenous goods will use a job order costing system. ANS: F
DIF: Easy
OBJ: 4-1
10. Cost flows and physical flows of units are identical. ANS: F
DIF: Easy
OBJ: 4-1
11. In an actual job-order costing system, factory overhead is assigned to a job continuously during the production process. ANS: F
DIF: Easy
OBJ: 4-1
104
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
12. In a normal job order costing system, actual factory overhead is applied at the end of the period ANS: F
DIF: Easy
OBJ: 4-1
13. In a normal job order costing system, factory overhead is applied using actual rates times actual input ANS: F
DIF: Moderate
OBJ: 4-1
14. In a normal job order costing system, factory overhead is applied using predetermined rates times actual input. ANS: T
DIF: Easy
OBJ: 4-1
15. In a normal job order costing system, factory overhead is applied using predetermined rates times standard input ANS: F
DIF: Moderate
OBJ: 4-1
16. In a standard job order costing system, factory overhead is applied using predetermined rates times standard input. ANS: T
DIF: Moderate
OBJ: 4-1
17. In a standard job order costing system, factory overhead is applied using actual rates times standard input. ANS: F
DIF: Moderate
OBJ: 4-1
18. In a standard job order costing system, factory overhead is applied using predetermined rates times actual input. ANS: F
DIF: Moderate
OBJ: 4-1
19. In a job order costing system, costs are accumulated for each individual job ANS: T
DIF: Easy
OBJ: 4-2
20. When raw materials are placed into production, the materials inventory account is debited ANS: F
DIF: Easy
OBJ: 4-4
21. When manufacturing overhead is charged to a job, the work in process account is debited. ANS: T
DIF: Moderate
OBJ: 4-4
22. When manufacturing overhead is charged to a job, the manufacturing overhead account is debited. ANS: F
DIF: Moderate
OBJ: 4-4
23. When manufacturing overhead is charged to a job, the work in process account is credited. ANS: F
DIF: Moderate
OBJ: 4-4
105
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
24. When indirect labor is applied to a job in process, the manufacturing overhead account is debited. ANS: F
DIF: Easy
OBJ: 4-4
25. When indirect labor is recorded for a job in process, the work in process account is debited. ANS: F
DIF: Easy
OBJ: 4-4
26. Standards can be computed for materials, labor, and overhead. ANS: T
DIF: Easy
OBJ: 4-4
27. Standards can be used in a job order costing system if the products manufactured are similar in nature. ANS: T
DIF: Easy
OBJ: 4-6
28. Overapplied factory overhead that is material in amount is closed to cost of good sold at year end. ANS: F
DIF: Easy
OBJ: 4-4
29. Overapplied factory overhead that is immaterial in amount is closed to cost of good sold at year end. ANS: T
DIF: Easy
OBJ: 4-4
30. Overapplied overhead that is material in amount is allocated between Finished Goods Inventory, Work in Process, and Cost of Goods Sold at year end ANS: T
DIF: Easy
OBJ: 4-4
31. Standards can be used in a job order costing system if the products manufactured are varied in nature. ANS: F
DIF: Moderate
OBJ: 4-6
32. If a normal loss is anticipated on a specific job, the overhead application rate should include an amount for the cost of defective units less disposal value. ANS: T
DIF: Moderate
OBJ: 4-8
33. If a normal loss is anticipated on all jobs, the overhead application rate should include an amount for the cost of defective units less disposal value. ANS: F
DIF: Moderate
OBJ: 4-8
34. Normal spoilage is considered a period cost ANS: F
DIF: Easy
OBJ: 4-8
35. Abnormal spoilage is considered a period cost ANS: T
DIF: Easy
OBJ: 4-8
106
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
36. The journal entry to record normal spoilage specifically identified with a particular job includes a debit to Work in Process ANS: F
DIF: Moderate
OBJ: 4-8
37. The journal entry to record normal spoilage specifically identified with a particular job includes a credit to Work in Process ANS: T
DIF: Moderate
OBJ: 4-8
38. Spoilage occurring on specific jobs should be considered in computing predetermined factory overhead rates ANS: F
DIF: Moderate
OBJ: 4-8
COMPLETION 1. A company that manufactures sugar will use a _____________________ costing system to track production costs ANS: process DIF: Easy
OBJ: 4-1
2. A company that manufactures custom bridal gowns will use a _______________ costing system to track production costs ANS: job-order DIF: Easy
OBJ: 4-1
3. A company that manufactures large quantities of homogeneous goods will normally use a _________________ costing system. ANS: process DIF: Easy
OBJ: 4-1
4. A company that manufactures small quantities of identifiable products will use a ________________ costing system. ANS: job order DIF: Easy
OBJ: 4-1
5. Three methods of job-cost valuation are normal, standard, and _________________. ANS: actual DIF: Easy
OBJ: 4-1
107
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
6. In a normal job order costing system, factory overhead is applied using ___________ rates times ________ input. ANS: predetermined;actual DIF: Easy
OBJ: 4-1
7. In a standard job order costing system, factory overhead is applied using ____________ rates times _______ input. ANS: predetermined;standard DIF: Moderate
OBJ: 4-1
8. When a job is begun, the first document in the job order process is the ____________________. ANS: materials requisition DIF: Easy
OBJ: 4-4
9. When raw materials are placed into production, the ______________________ account is debited ANS: Work in process DIF: Easy
OBJ: 4-4
10. When indirect materials are added to a job, the __________________________ account is debited. ANS: manufacturing overhead DIF: Easy
OBJ: 4-4
11. When manufacturing overhead is applied to a job in process, the __________________ is debited ANS: work in process DIF: Easy
OBJ: 4-4
12. When manufacturing overhead is applied to a job in process, the _______________ account is credited. ANS: manufacturing overhead DIF: Moderate
OBJ: 4-4
13. The document that contains all information about the costs of a specific job is a ___________________. ANS: job order cost sheet DIF: Easy
OBJ: 4-4
108
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
14. When indirect labor is recorded for a job in process, ___________________________ is debited. ANS: manufacturing overhead DIF: Easy
OBJ: 4-4
15. When production is completed on a job, finished goods are transferred to the ____________________________ account. ANS: Finished Goods Inventory DIF: Easy
OBJ: 4-4
16. The difference between a standard and an actual quantity, price, or rate is a(n)________________. ANS: variance DIF: Easy
OBJ: 4-6
17. If a substandard product can be reworked, it is known as a ______________. ANS: defect DIF: Easy
OBJ: 4-8
18. If a substandard product cannot be reworked, it is known as ______________. ANS: spoilage DIF: Easy
OBJ: 4-8
19. Underapplied factory overhead that is immaterial in amount is closed to ______________________ at year end. ANS: Cost of Goods Sold DIF: Easy
OBJ: 4-6
20. Underapplied factory overhead that is material in amount is closed to _______________, ______________, and ______________________ at year end. ANS: Work in Process, Finished Goods Inventory,Cost of Goods Sold DIF: Easy
OBJ: 4-6
109
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
MULTIPLE CHOICE 1. Which of the following organizations would be most likely to use a job order costing system? a. the loan department of a bank b. the check clearing department of a bank c. a manufacturer of processed cheese food d. a manufacturer of video cassette tapes ANS: A
DIF: Moderate
OBJ: 4-1
2. When job order costing is used, the primary focal point of cost accumulation is the a. department. b. supervisor. c. item. d. job. ANS: D
DIF: Easy
OBJ: 4-1
3. In a job order costing system, a. standards cannot be used. b. an average cost per unit within a job cannot be computed. c. costs are accumulated by departments and averaged among all jobs. d. overhead is typically assigned to jobs on the basis of some cost driver. ANS: D
DIF: Easy
OBJ: 4-1
4. What is the best cost accumulation procedure to use when many batches, each differing as to product specifications, are produced? a. job order b. process c. actual d. standard ANS: A
DIF: Easy
OBJ: 4-1
5. Which of the following could not be used in job order costing? a. standards b. an average cost per unit for all jobs c. normal costing d. overhead allocation based on the job's direct labor hours ANS: B
DIF: Easy
OBJ: 4-1
110
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
6. Which of the following costing methods of valuation are acceptable in a job order costing system? Actual Material Cost a. b. c. d.
Standard Material Cost
yes yes no yes
ANS: D
yes no yes yes
Actual Labor Cost
Predetermined Overhead Cost
no yes yes yes
yes no yes yes
DIF: Easy
OBJ: 4-1
7. Which of the following costing systems allows management to quickly recognize materials, labor, and overhead variances and take measures to correct them? Actual Cost System
Normal Cost System
yes yes no no
yes no yes no
a. b. c. d.
ANS: D
DIF: Easy
OBJ: 4-1
8. In a normal cost system, a debit to Work in Process Inventory would not be made for a. actual overhead. b. applied overhead. c. actual direct material. d. actual direct labor. ANS: A
DIF: Easy
OBJ: 4-1
9. Which of the following are drawbacks to applying actual overhead to production? a. A delay occurs in assigning costs to jobs or products. b. Fluctuations in quantities produced during a period could cause varying per-unit charges for fixed overhead. c. Seasonality of overhead costs may cause distortions in job or product costs. d. all answers are correct. ANS: D
DIF: Easy
OBJ: 4-4
111
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
10. Job order costing and process costing have which of the following characteristics? Job Order Costing a. homogeneous products and large quantities homogeneous products b. and small quantities c. heterogeneous products and large quantities d. heterogeneous products and small quantities
ANS: D
DIF: Easy
Process Costing heterogeneous products and small quantities heterogeneous products and large quantities homogeneous products and small quantities homogeneous products and large quantities
OBJ: 4-1
11. A credit to Work in Process Inventory represents a. work still in process. b. raw material put into production. c. the application of overhead to production. d. the transfer of completed items to Finished Goods Inventory. ANS: D
DIF: Easy
OBJ: 4-4
12. In a job order costing system, the dollar amount of the entry that debits Finished Goods Inventory and credits Work in Process Inventory is the sum of the costs charged to all jobs a. started in process during the period. b. in process during the period. c. completed and sold during the period. d. completed during the period. ANS: D
DIF: Easy
OBJ: 4-4
13. Total manufacturing costs for the year plus beginning Work in Process Inventory cost equals a. cost of goods manufactured in the year. b. ending Work in Process Inventory. c. total manufacturing costs to account for. d. cost of goods available for sale. ANS: C
DIF: Easy
OBJ: 4-4
14. Which of the following would be least likely to be supported by subsidiary accounts or ledgers in a company that employs a job order costing system? a. Work in Process Inventory b. Raw Material Inventory c. Accounts Payable d. Supplies Inventory ANS: D
DIF: Easy
OBJ: 4-4
112
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
15. A journal entry includes a debit to Work in Process Inventory and a credit to Raw Material Inventory. The explanation for this would be that a. indirect material was placed into production. b. raw material was purchased on account. c. direct material was placed into production. d. direct labor was used for production. ANS: C
DIF: Easy
OBJ: 4-4
16. The source document that records the amount of raw material that has been requested by production is the a. job order cost sheet. b. bill of lading. c. interoffice memo. d. material requisition. ANS: D
DIF: Easy
OBJ: 4-3
17. A material requisition form should show all of the following information except a. job number. b. quantity required. c. unit cost. d. purchase order number. ANS: D
DIF: Easy
OBJ: 4-3
18. Which of the following statements about job order cost sheets is true? a. All job order cost sheets serve as the general ledger control account for Work in Process Inventory. b. Job order cost sheets can serve as subsidiary ledger information for both Work in Process Inventory and Finished Goods Inventory. c. If material requisition forms are used, job order cost sheets do not need to be maintained. d. Job order cost sheets show costs for direct material and direct labor, but not for manufacturing overhead since it is an applied amount. ANS: B
DIF: Easy
OBJ: 4-3
19. The primary accounting document in a job order costing system is a(n) a. bill of materials. b. job order cost sheet. c. employee time sheet. d. materials requisition. ANS: B
DIF: Easy
OBJ: 4-3
20. The cost sheets for incomplete jobs at the end of the period comprise the subsidiary ledger for a. Finished Goods Inventory. b. Raw Material Inventory. c. Work in Process Inventory. d. Supplies Inventory. ANS: C
DIF: Easy
OBJ: 4-3
113
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
21. The __________ provides management with a historical summation of total costs for a given product. a. job order cost sheet b. employee time sheet c. material requisition form d. bill of lading ANS: A
DIF: Easy
OBJ: 4-3
22. The source document that records the amount of time an employee worked on a job and his/her pay rate is the a. job order cost sheet. b. employee time sheet. c. interoffice memo. d. labor requisition form. ANS: B
DIF: Easy
OBJ: 4-3
23. Which of the following journal entries records the accrual of the cost of indirect labor used in production? a. debit Work in Process Inventory, credit Wages Payable b. debit Work in Process Inventory, credit Manufacturing Overhead c. debit Manufacturing Overhead, credit Work in Process Inventory d. debit Manufacturing Overhead, credit Wages Payable ANS: D
DIF: Easy
OBJ: 4-4
24. In job order costing, payroll taxes paid by the employer for factory employees are commonly accounted for as a. direct labor cost. b. manufacturing overhead cost. c. indirect labor cost. d. administrative cost. ANS: B
DIF: Easy
OBJ: 4-4
25. The logical explanation for an entry that includes a debit to Manufacturing Overhead control and a credit to Prepaid Insurance is a. the insurance company sent the company a refund of its policy premium. b. overhead for insurance was applied to production. c. insurance for production equipment expired. d. insurance was paid on production equipment. ANS: C
DIF: Easy
OBJ: 4-4
26. The journal entry to apply overhead to production includes a credit to Manufacturing Overhead control and a debit to a. Finished Goods Inventory. b. Work in Process Inventory. c. Cost of Goods Sold. d. Raw Material Inventory. ANS: B
DIF: Easy
OBJ: 4-4
114
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
27. Production overhead does not include the costs of a. factory depreciation and supplies. b. factory employees' cafeteria departments. c. production line labor. d. the maintenance department for the factory. ANS: C
DIF: Easy
OBJ: 4-4
28. In a job order costing system, the use of indirect material would usually be reflected in the general ledger as an increase in a. stores control. b. work in process control. c. manufacturing overhead applied. d. manufacturing overhead control. ANS: D
DIF: Easy
OBJ: 4-4
29. A credit to the Manufacturing Overhead control account represents the a. actual cost of overhead incurred. b. actual cost of overhead paid this period. c. amount of overhead applied to production. d. amount of indirect material and labor used during the period. ANS: C
DIF: Easy
OBJ: 4-4
30. The journal entry to record the incurrence and payment of overhead costs for factory insurance requires a debit to a. Cash and a credit to Manufacturing Overhead. b. Manufacturing Overhead and a credit to Accounts Payable. c. Manufacturing Overhead and a credit to Cash. d. Work in Process Inventory and a credit to Cash. ANS: C
DIF: Easy
OBJ: 4-4
31. Overhead is applied to jobs in a job order costing system a. at the end of a period. b. as jobs are completed. c. at the end of a period or as jobs are completed, whichever is earlier. d. at the end of a period or as jobs are completed, whichever is later. ANS: C
DIF: Easy
OBJ: 4-4
32. In a job order costing system, the subsidiary ledger for Finished Goods Inventory is comprised of a. all job order cost sheets. b. job order cost sheets for all uncompleted jobs. c. job order cost sheets for all completed jobs not yet sold. d. job order cost sheets for all ordered, uncompleted, and completed jobs. ANS: C
DIF: Easy
OBJ: 4-4
115
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
33. Underapplied overhead resulting from unanticipated and immaterial price increases for overhead items should be written off by a. decreasing Cost of Goods Sold. b. increasing Cost of Goods Sold. c. decreasing Cost of Goods Sold, Work in Process Inventory, and Finished Goods Inventory. d. increasing Cost of Goods Sold, Work in Process Inventory, and Finished Goods Inventory. ANS: B
DIF: Easy
OBJ: 4-4
34. Overapplied overhead would result if a. the plant were operated at less than normal capacity. b. overhead costs incurred were less than costs charged to production. c. overhead costs incurred were unreasonably small in relation to units produced. d. overhead costs incurred were greater than costs charged to production. ANS: B
DIF: Easy
OBJ: 4-4
35. Debits to Cost of Goods Sold typically represent the a. transfer of completed items to Finished Goods Inventory. b. costs of items sold. c. selling price of items sold. d. the cost of goods manufactured. ANS: B
DIF: Easy
OBJ: 4-4
36. In a perpetual inventory system, a transaction that requires two journal entries (or one compound entry) is needed when a. raw materials are purchased on account. b. goods are sold for either cash or on account. c. goods are finished and transferred out of Work in Process Inventory. d. overhead is applied to Work in Process Inventory. ANS: B
DIF: Easy
OBJ: 4-4
37. Which of the following statements is false? a. While the use of standard costing is acceptable for job order costing systems, actual cost records should still be maintained. b. It is normally more time-consuming for a company to use standard costs in a job order costing system. c. Standards can be used in a job order costing system, if the company usually produces items that are similar in nature. d. Standard costs may be used for material, labor, or both material and labor in a job order costing environment. ANS: B
DIF: Easy
OBJ: 4-6
38. The trend in job order costing is to a. eliminate the data entry function for the accounting system. b. automate the data collection and data entry functions. c. use accounting software to change the focal point of the job order system. d. create an Intranet to share information between competitors. ANS: B
DIF: Easy
OBJ: 4-5
116
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
39. As data input functions are automated, Intranet data becomes more a. complicated to access. b. manufacturing, but not accounting, oriented. c. real-time accessible. d. expensive to install, but easier to use. ANS: C
DIF: Easy
OBJ: 4-5
40. The use of standard material or labor costs in job order costing a. is similar to the use of predetermined overhead rates in a normal costing system. b. will keep actual costs of jobs from fluctuating due to changes in component costs. c. is appropriate for any company making a units to customer specification. d. all answers are correct. ANS: A
DIF: Easy
OBJ: 4-6
41. After the completion of production, standard and actual costs are compared to determine the ______ of the production process. a. effectiveness b. complexity c. homogeneity d. efficiency ANS: D
DIF: Easy
OBJ: 4-1
42. A company producing which of the following would be most likely to use a price standard for material? a. furniture b. NFL-logo jackets c. picture frames d. none of the above ANS: B
DIF: Moderate
OBJ: 4-1
43. A company producing which of the following would be most likely to use a time standard for labor? a. mattresses b. picture frames c. floral arrangements d. stained-glass windows ANS: A
DIF: Moderate
OBJ: 4-1
44. A service organization would be most likely to use a predetermined overhead rate based on a. machine hours. b. standard material cost. c. direct labor. d. number of complaints. ANS: C
DIF: Easy
OBJ: 4-7
117
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
45. Knowing specific job costs enables managers to effectively perform which of the following tasks? a. estimate costs of future jobs. b. establish realistic job selling prices. c. evaluate job performance. d. all answers are correct. ANS: D
DIF: Easy
OBJ: 4-1
46. A job order costing system is likely to provide better (1) (2) (3)
a. b. c. d.
inventory valuations for financial statements. control over inventory. information about ability to accept additional production work.
(1)
(2)
(3)
yes no no yes
no yes no yes
no yes no yes
ANS: D
DIF: Difficult
OBJ: 4-1
47. In a production environment that manufactures goods to customer specifications, a job order costing system a. can be used only if standard costs are used for materials and labor. b. will provide reasonable product cost information only when all jobs utilize approximately the same quantities of material and labor. c. may be maintained using either actual or predetermined overhead rates. d. emphasizes that large customers create the most costs even though they also provide the most revenues. ANS: C
DIF: Difficult
OBJ: 4-6
48. A unit that is rejected at a quality control inspection point, but that can be reworked and sold, is referred to as a a. spoiled unit. b. scrap unit. c. abnormal unit. d. defective unit. ANS: D
DIF: Easy
OBJ: 4-8
49. The cost of abnormal losses (net of disposal costs) should be written off as Product cost
Period cost
yes yes no no
no yes yes no
a. b. c. d.
ANS: C
DIF: Easy
OBJ: 4-8
118
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
50. In a job order costing system, the net cost of normal spoilage is equal to a. estimated disposal value plus the cost of spoiled work. b. the cost of spoiled work minus estimated spoilage cost. c. the units of spoiled work times the predetermined overhead rate. d. the cost of spoiled work minus the estimated disposal value. ANS: D
DIF: Moderate
OBJ: 4-8
51. If abnormal spoilage occurs in a job order costing system, has a material dollar value, and is related to a specific job, the recovery value of the spoiled goods should be debited to a. b. c. d.
a scrap inventory account the specific job in process a loss account factory overhead
ANS: A
DIF: Moderate
credited to the specific job in process overhead the specific job in process sales
OBJ: 4-8
52. In a job order costing system, the net cost of normal spoilage is equal to a. estimated disposal value plus the cost of spoiled work. b. the cost of spoiled work minus estimated spoilage cost. c. the units of spoiled work times the predetermined overhead rate. d. the cost of spoiled work minus the estimated disposal value. ANS: D
DIF: Moderate
OBJ: 4-8
53. Shrinkage should be treated as a. defective units. b. spoiled units. c. miscellaneous expense. d. a reduction of overhead. ANS: B
DIF: Easy
OBJ: 4-8
54. Spoiled units are a. units that cannot be economically reworked to bring them up to standard. b. units that can be economically reworked to bring them up to standard. c. the same as defective units. d. considered abnormal losses. ANS: A
DIF: Easy
OBJ: 4-8
55. Abnormal spoilage is a. spoilage that is forecasted or planned. b. spoilage that is in excess of planned. c. accounted for as a product cost. d. debited to Cost of Goods Sold. ANS: B
DIF: Easy
OBJ: 4-8
119
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
56. Normal spoilage is defined as unacceptable production that a. arises because of a special job or process. b. occurs in on-going operations. c. is caused specifically by human error. d. is in excess of that which is expected. ANS: B
DIF: Easy
OBJ: 4-8
57. Which of the following would fall within the range of tolerance for a production cycle? Abnormal loss a. b. c. d.
yes yes no no
ANS: D
Normal loss yes no no yes
DIF: Easy
OBJ: 4-8
58. The net cost of normal spoilage in a job order costing system in which spoilage is common to all jobs should be a. assigned directly to the jobs that caused the spoilage. b. charged to manufacturing overhead during the period of the spoilage. c. charged to a loss account during the period of the spoilage. d. allocated only to jobs that are completed during the period. ANS: B
DIF: Moderate
OBJ: 4-8
59. Cajun Company. uses a job order costing system. During April 20X6, the following costs appeared in the Work in Process Inventory account: Beginning balance Direct material used Direct labor incurred Applied overhead Cost of goods manufactured
$ 24,000 70,000 60,000 48,000 185,000
Cajun Company applies overhead on the basis of direct labor cost. There was only one job left in Work in Process at the end of April which contained $5,600 of overhead. What amount of direct material was included in this job? a. $4,400 b. $4,480 c. $6,920 d. $8,000 ANS: A Total Costs Incurred Less: Cost of Goods Manufactured Costs remaining in WIP Overhead Direct Labor (5,600/.80) Direct Materials DIF: Moderate
202,000 (185,000) 17,000 5,600 7,000
OBJ: 4-4
120
(12,600) 4,400
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
60. Quest Co. is a print shop that produces jobs to customer specifications. During January 20X6, Job #3051 was worked on and the following information is available: Direct material used Direct labor hours worked Machine time used Direct labor rate per hour Overhead application rate per hour of machine time
$2,500 15 6 $7 $18
What was the total cost of Job #3051 for January? a. $2,713 b. $2,770 c. $2,812 d. $3,052 ANS: A $
Direct Materials Direct Labor (15 hours * $7/hour) Factory Overhead (6 hrs machine time * * $18/mach hr)
2,500 105 108 2,713
$
DIF: Easy
OBJ: 4-4
Alpha Company Alpha Co. uses a job order costing system. At the beginning of January, the company had two jobs in process with the following costs:
Job #456 Job #461
Direct Material
Direct Labor
Overhead
$3,400 1,100
$510 289
$255 ?
Alpha pays its workers $8.50 per hour and applies overhead on a direct labor hour basis. 61. Refer to Alpha Company. What is the overhead application rate per direct labor hour? a. $ 0.50 b. $ 2.00 c. $ 4.25 d. $30.00 ANS: C 60 hrs
Direct Labor Hours: $510/$8.50 Overhead Application Rate: $255 / 60 hrs DIF: Easy
$
OBJ: 4-4
121
4.25
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
62. Refer to Alpha Company. How much overhead was included in the cost of Job #461 at the beginning of January? a. $ 144.50 b. $ 153.00 c. $2,200.00 d. $2,456.50 ANS: A 34 hrs
Direct Labor Hours: $289/$8.50 Overhead Application Rate: $255 / 60 hrs 34 hrs * $4.25/hr DIF: Easy
$ $
4.25 144.50
OBJ: 4-4
63. Refer to Alpha Company. During January, Alpha’s employees worked on Job #649. At the end of the month, $714 of overhead had been applied to this job. Total Work in Process at the end of the month was $6,800 and all other jobs had a total cost of $3,981. What amount of direct material is included in Job #649? a. $ 677.00 b. $1,391.00 c. $2,142.00 d. $4,658.00 ANS: A Direct Materials--Job 649 Total Work in Process Other Work in Process Costs remaining in WIP Overhead Direct Labor (OH x 2) $714 * 2 Direct Materials DIF: Difficult
$
714 1,428 $
OBJ: 4-4
122
6,800 (3,981) 2,819 (2,142) 677
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
64. Brown Corporation manufactures products on a job order basis. The job cost sheet for Job #656 shows the following for March: Direct material Direct labor (100 hours @ $7.25) Machine hours incurred Predetermined overhead rate per machine hour
$5,000 $725 40 $26
At the end of March, what total cost appears on the job cost sheet for Job #656? a. $5,725 b. $5,765 c. $6,765 d. $8,325 ANS: C Direct Materials Direct Labor (15 hours * $7/hour) Factory Overhead (26 hrs machine time * * $40/mach hr)
$
$
DIF: Easy
5,000 725 1,040 6,765
OBJ: 4-4
65. Products at Redd Manufacturing are sent through two production departments: Fabricating and Finishing. Overhead is applied to products in the Fabricating Department based on 150 percent of direct labor cost and $18 per machine hour in Finishing. The following information is available about Job #297:
Direct material Direct labor cost Direct labor hours Machine hours Overhead applied
Fabricating
Finishing
$1,590 ? 22 5 429
$580 48 6 15 ?
What is the total cost of Job #297? a. $2,647 b. $3,005 c. $3,093 d. $3,203 ANS: D Direct Labor Fabricating $429/1.50 = $286 Applied Overhead Finishing 15 hrs * $18 = $270 Fabricating $ 1,590 286 429 2,305
Direct material Direct labor cost Overhead applied Total Costs
DIF: Moderate
OBJ: 4-4
123
Finishing $ 580 48 270 898
$ 3,203
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
66. Virginia Company applies overhead to jobs at the rate of 40 percent of direct labor cost. Direct material of $1,250 and direct labor of $1,400 were expended on Job #145 during June. On May 31, the balance of Job #145 was $2,800. The balance on June 30 is: a. $3,210. b. $4,760. c. $5,450. d. $6,010. ANS: D $
Beginning WIP Direct Materials Direct Labor Factory Overhead ($1400 * 40%) Ending WIP DIF: Easy
$
2,800 1,250 1,400 560 6,010
OBJ: 4-4
Jackson Company. Jackson Company uses a job order costing system and the following information is available from its records. The company has three jobs in process: #6, #9, and #13. Raw material used Direct labor per hour Overhead applied based on direct labor cost
$120,000 $8.50 120%
Direct material was requisitioned as follows for each job respectively: 30 percent, 25 percent, and 25 percent; the balance of the requisitions was considered indirect. Direct labor hours per job are 2,500; 3,100; and 4,200; respectively. Indirect labor is $33,000. Other actual overhead costs totaled $36,000. 67. Refer to Jackson Company. What is the prime cost of Job #6? a. $42,250 b. $57,250 c. $73,250 d. $82,750 ANS: B
Direct Materials (120,000 * 30%) Direct Labor (2500 * $8.50)
$
36,000 21,250
Total Prime Costs
$
57,250
DIF: Moderate
OBJ: 4-4
124
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
68. Refer to Jackson Company. What is the total amount of overhead applied to Job #9? a. $18,250 b. $26,350 c. $30,000 d. $31,620 ANS: D Direct Labor Hours 3100
DIF: Moderate
Direct Labor Rate $8.50
OH Application Rate 120%
Total $31,620
OBJ: 4-4
69. Refer to Jackson Company. What is the total amount of actual overhead? a. $36,000 b. $69,000 c. $93,000 d. $99,960 ANS: C
$
Indirect Materials ($120,000 * 20%) Indirect Labor Other Overhead Costs Total Prime Costs DIF: Moderate
24,000 33,000 36,000 93,000
$
OBJ: 4-4
70. Refer to Jackson Company. How much overhead is applied to Work in Process? a. $ 69,000 b. $ 99,960 c. $132,960 d. $144,000 ANS: B Direct Labor Hours
6 9 13
$
Direct Labor Rate Overhead Application Rate Total Overhead Applied DIF: Moderate
2500 3100 4200
$
OBJ: 4-4
125
9,800 8.50 120% 99,960
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
71. Refer to Jackson Company. If Job #13 is completed and transferred, what is the balance in Work in Process Inventory at the end of the period if overhead is applied at the end of the period? a. $ 96,700 b. $ 99,020 c. $139,540 d. $170,720 ANS: D Step 1: Determine Total Cost of Job 13 DM: $120,000 * .25 DL: 4,200 * 8.50 FOH: 35,700 * 120%
$ 30,000 35,700 42,840
Step 2: Compute Total Cost of Job 6 DM: $120,000 * .30 DL: 2,500 * 8.50 FOH: 21,250 * 120% Step 2: Compute Total Cost of Job 9 DM: $120,000 * .25 DL: 3,100 * 8.50 FOH: 26,350 * 120%
108,540
$ 36,000 21,250 25,500
82,750
$ 30,000 26,350 31,620 87,970
Total Costs of Jobs 6 and 9
DIF: Difficult
170,720
OBJ: 4-4
126
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
72. Refer to Jackson Company. Assume the balance in Work in Process Inventory was $18,500 on June 1 and $25,297 on June 30. The balance on June 30 represents one job that contains direct material of $11,250. How many direct labor hours have been worked on this job (rounded to the nearest hour)? a. 751 b. 1,324 c. 1,653 d. 2,976 ANS: A Step 1: Determine DL and FOH WIP at June 30: Less DM in WIP
$ 25,297 11,250
14,047
Step 2: Separate DL and FOH Let x = DL; 1.2x = FOH x + 1.2x = 14,047 2.2x = 14,047 x = $6,385 Step 3: Compute DL Hours $6,385 ÷ 8.50 DIF: Moderate
751 hours
OBJ: 4-4
Beta Company The following information pertains to Beta Company for September 20X4. Direct Material
Direct Labor
Overhead
$3,200 ? 5,670
$4,500 5,000 ?
? ? $5,550
Job #323 Job #325 Job #401
Beta Company applies overhead for Job #323 at 140 percent of direct labor cost and at 150 percent of direct labor cost for Jobs #325 and #401. The total cost of Jobs #323 and #325 is identical. 73. Refer to Beta Co. What amount of overhead is applied to Job #323? a. $4,800 b. $5,550 c. $6,300 d. $7,500 ANS: C Direct Labor $4,500
DIF: Easy
Application Rate 140%
Total Overhead $6,300
OBJ: 4-4
127
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
74. Refer to Beta Co. What amount of overhead is applied to Job #325? a. $8,325 b. $7,500 c. $7,000 d. $5,000 ANS: B Direct Labor $5,000
DIF: Easy
Application Rate 150%
Total Overhead $7,500
OBJ: 4-4
75. Refer to Beta Co. What is the amount of direct materials for Job #325? a. $1,950 b. $1,500 c. $3,700 d. $7,500 ANS: B Step 1: Determine OH for Jobs 323 and 325 323 325 DM
Step 2: Compute Total Cost of Job 323
Step 3: Compute Direct Materials for Job 325 (14,000 - (5,000 + 7,500)
DIF: Moderate
OBJ: 4-4
128
$
6,300 7,500
$
3,200
DL
4,500
FOH
6,300
14,000 $
1,500
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
76. Refer to Beta Co. Assume that Jobs #323 and #401 are incomplete at the end of September. What is the balance in Work in Process Inventory at that time? a. $18,920 b. $22,620 c. $28,920 d. $30,120 ANS: C Step 1: Determine DL for Job 401 $5,550 ÷ 150%
3,700
DM
Step 2: Compute Total Cost of Job 401
$
DL
3,700
FOH
5,550
DM
Step 2: Compute Total Cost of Job 323
5,670
$
3,200
DL
4,500
FOH
6,300
Total Costs of Jobs 323 and 401
DIF: Moderate
14,920
14,000 28,920
OBJ: 4-4
Camden Company Camden Company has two departments (Processing and Packaging) and uses a job order costing system. Baker applies overhead in Processing based on machine hours and on direct labor cost in Packaging. The following information is available for July:
Machine hours Direct labor cost Applied overhead
Processing
Packaging
2,500 $44,500 $55,000
1,000 $23,000 $51,750
77. Refer to Camden Company. What is the overhead application rate per machine hour for Processing? a. $ 0.81 b. $ 1.24 c. $17.80 d. $22.00 ANS: D Total Applied Overhead $55,000
DIF: Easy
Machine Hours 2,500
OBJ: 4-4
129
Rate per Hour $22.00
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
78. Refer to Camden Co. What is the overhead application rate for Packaging? a. $ 0.44 b. $ 2.25 c. $23.00 d. $51.75 ANS: B Total Applied Overhead $51,750
DIF: Easy
Total Direct Labor $23,000
Rate per Hour $2.25
OBJ: 4-4
Tiger Company Tiger Company has a job order costing system and an overhead application rate of 120 percent of direct labor cost. Job #63 is charged with direct material of $12,000 and overhead of $7,200. Job #64 has direct material of $2,000 and direct labor of $9,000. 79. Refer to Tiger Co. What amount of direct labor cost has been charged to Job #63? a. $ 6,000 b. $ 7,200 c. $ 8,640 d. $14,400 ANS: A Total Applied Overhead $7,200
DIF: Easy
Overhead Application Rate 120%
Direct Labor Charged $6,000
OBJ: 4-4
80. Refer to Tiger Company. What is the total cost of Job #64? a. $10,800 b. $11,000 c. $21,800 d. $30,200 ANS: C 2,000
Direct Materials
9,000 10,800
Direct Labor Factory Overhead ($9,000 * 120%) Total Cost of Job 64 DIF: Easy
21,800
OBJ: 4-4
130
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
Bradley Company Bradley Company uses a job order costing system. Assume that Job #504 is the only one in process. The following information is available: Budgeted direct labor hours Budgeted overhead Direct labor cost
65,000 $350,000 $70,000
Budgeted machine hours Direct material
9,000 $110,500
81. Refer to Bradley Company. What is the overhead application rate if Bradley uses a predetermined overhead application rate based on direct labor hours (rounded to the nearest whole dollar)? a. $ 0.20 b. $ 5.00 c. $ 5.38 d. $38.89 ANS: C Budgeted Overhead $350,000
DIF: Easy
Budgeted Direct Labor Hours 65,000
Overhead Application Rate $5.38
OBJ: 4-4
82. Refer to Bradley Company. What is the total cost of Job #504 assuming that overhead is applied at the rate of 135% of direct labor cost (rounded to the nearest whole dollar)? a. $192,650 b. $268,250 c. $275,000 d. $329,675 ANS: C Direct Materials Direct Labor Factory Overhead ($70,000 * 135%) Total Cost of Job #504 DIF: Easy
110,500 70,000 94,500 275,000
OBJ: 4-4
131
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
83. At the end of the last fiscal year, Roberts Company had the following account balances: Overapplied overhead Cost of Goods Sold Work in Process Inventory Finished Goods Inventory
$ 6,000 $980,000 $ 38,000 $ 82,000
If the most common treatment of assigning overapplied overhead were used, the final balance in Cost of Goods Sold is: a. $974,000. b. $974,660. c. $985,340. d. $986,000. ANS: A Unadjusted COGS $980,000
DIF: Easy
less: Overapplied OH $6,000
Adjusted COGS $974,000
OBJ: 4-4
84. Strong Products has no Work in Process or Finished Goods inventories at the close of business on December 31, 20X4. The balances of Strong Products’ accounts as of December 31, 20X4, are as follows: Cost of goods sold--unadjusted Selling & administrative expenses Sales Manufacturing overhead control Manufacturing overhead applied
$2,040,000 900,000 3,600,000 700,000 648,000
Pretax income for 20X4 is: a. $608,000. b. $660,000. c. $712,000. d. undeterminable from the information given. ANS: A Sales Cost of Goods Sold Factory Overhead Underapplied (700,000-648,000) Selling, General and Administrative Expenses Pretax Income DIF: Moderate
OBJ: 4-4
132
$ 3,600,000 2,040,000 52,000
(2,092,000) (900,000) $
608,000
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
Wilson Manufacturing Company Wilson Manufacturing Company produces beach chairs. Chair frames are all the same size, but can be made from plastic, wood, or aluminum. Regardless of frame choice, the same sailcloth is used for the seat on all chairs. Wilson has set a standard for sailcloth of $9.90 per square yard and each chair requires 1 square yard of material. Wilson produced 500 plastic chairs, 100 wooden chairs, and 250 aluminum chairs during June. The total cost for 1,000 square yards of sailcloth during the month was $10,000. At the end of the month, 50 square yards of sailcloth remained in inventory. 85. Refer to Wilson Manufacturing Company. The unfavorable material price variance for sailcloth purchases for the month was a. $ 100. b. $ 495. c. $1,090. d. $1,585. ANS: A
DIF: Moderate
$10,000 ÷ 1,000
$10.00 per yard
$(9.90 - 10.00) * 1,000 yards
$100
OBJ: 4-6
86. Refer to Wilson Manufacturing Company. Assuming that there was no sailcloth in inventory at the beginning of June, the unfavorable material quantity variance for the month was a. $ 495. b. $ 500. c. $ 990. d. $1,000. ANS: C 850 yards 950 yards 100 yards 9.90/yard
850 chairs * 1 yard per chair Actual usage (1,000 - 50) Unfavorable usage variance
$
DIF: Moderate
990
OBJ: 4-6
87. Refer to Wilson Manufacturing Company. Wilson could set a standard cost for which of the following? Frame cost a. b. c. d.
yes no yes no
ANS: D
Predetermined OH rate yes no no yes
DIF: Difficult
Labor rate yes no no yes
OBJ: 4-6
133
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
SHORT ANSWER 1. Compare and contrast job order and process costing systems. ANS: Job order costing is characterized by the production of small quantities of heterogeneous distinct or unique items. Items are produced according to customer specifications and, at a minimum, direct material and direct labor costs can be traced to specific jobs. Process costing is characterized by the production of large quantities of homogeneous (alike or similar in nature) items. Specific items cannot be identified with specific costs during the production process. DIF: Moderate
OBJ: 4-1
2. Discuss actual costing, normal costing, and standard costing. ANS: Actual costing, normal costing, or standard costing may be used in either a job order costing or process costing system. Actual costing assigns the actual cost of all direct material, direct labor, and overhead to the units produced. Normal costing uses actual direct material and direct labor cost and a predetermined overhead application rate to cost products. Standard costing establishes "norms" for direct material and direct labor quantities and/or costs and uses a predetermined (standard) overhead rate for the application of overhead to determine product cost. DIF: Moderate
OBJ: 4-1
3. What is a "job" as defined in a job order costing system? ANS: A job is a single unit or a group of like items that is produced to customer specifications. A job is separately identifiable from other jobs. Each job is treated as a cost object, and costs (typically actual direct material, actual direct labor, and overhead applied using a predetermined rate) are attached to each job as it flows through the production process. DIF: Moderate
OBJ: 4-2
4. What information should be contained in a subsidiary ledger for Work in Process Inventory in a job order costing system? ANS: The Work in Process Inventory subsidiary ledger should contain information on all incomplete jobs. This information will include the amount of direct material and direct labor costs in production, as well as the amount of overhead applied to each job. The subsidiary ledger for Work in Process Inventory is composed of all job cost sheets for uncompleted jobs and substantiates the balance in the general ledger Work in Process Inventory control account. DIF: Moderate
OBJ: 4-3
134
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
5. Discuss the basic forms used in a job order costing system. ANS: The forms used in a job order costing system include (1) a job order cost sheet which records all the financial and significant production data (actual or standard, and possibly budgeted) relating to a particular job; (2) a material requisition form which records the costs and quantities of material that has been requisitioned for a particular job; and (3) an employee time sheet which records the jobs worked on by an employee and the amount of time spent on each job. DIF: Moderate
OBJ: 4-3
6. Can standard costing be used in job order costing? If so, what conditions must exist? If not, explain why. ANS: Yes. Firms that use job order costing can also base their costs on standards. Each job must be fairly similar to each other job. Standards may be used for the prices of material and labor if the jobs use basically the same kind of material and labor. If jobs are homogeneous enough, standards can also be used for materials and labor quantities. Some companies may choose to only use price standards, others only quantity standards, and others may use both price and quantity standards. DIF: Moderate
OBJ: 4-6
7. Discuss the accounting treatment of spoilage in a job order costing system. ANS: If the spoilage is common to all jobs, is normal, and can be estimated, the net cost is applied to production using a predetermined overhead rate that was set by including the spoilage estimate in estimated overhead. If spoilage pertains to a particular job and is normal, the disposal value of the spoiled goods should be removed from that particular job. If the spoilage is abnormal, the net cost should be charged to a loss account and credited to the particular Work in Process job that created the spoilage. DIF: Moderate
OBJ: 4-8
135
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
PROBLEM 1. Prepare the necessary journal entries from the following information for Anderson Company, which uses a perpetual inventory system. a. b. c. d. e. f. g.
Purchased raw material on account, $56,700. Requisitioned raw material for production as follows: direct material-80 percent of purchases; indirect material-15 percent of purchases. Direct labor wages of $33,100 are accrued as are indirect labor wages of $12,500. Overhead incurred and paid for is $66,900. Overhead is applied to production based on 110 percent of direct labor cost. Goods costing $97,600 were completed during the period. Goods costing $51,320 were sold on account for $77,600.
ANS: a. b.
c.
d. e. f. g.
Raw Material Inventory Accounts Payable Work in Process Inventory Manufacturing Overhead Raw Material Inventory Work in Process Inventory Manufacturing Overhead Wages Payable Manufacturing Overhead Cash Work in Process Inventory Manufacturing Overhead Finished Goods Inventory Work in Process Inventory Cost of Goods Sold Finished Goods Inventory Accounts Receivable Sales
DIF: Easy
56,700 56,700 45,360 8,505 53,865 33,100 12,500 45,600 66,900 66,900 36,410 36,410 97,600 97,600 51,320 51,320 77,600 77,600
OBJ: 4-4
136
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
2. Richards Company employs a job order costing system. Only three jobs-Job #205, Job #206, and Job #207-were worked on during January and February. Job #205 was completed February 10; the other two jobs were still in production on February 28, the end of the company's operating year. Job cost sheets on the three jobs follow:
Job #205
Job Cost Sheet Job #206
January costs incurred: Direct material Direct labor Manufacturing overhead
$16,500 13,000 20,800
$ 9,300 7,000 11,200
February costs incurred: Direct materials Direct labor Manufacturing overhead
— 4,000 ?
8,200 6,000 ?
Job #207 $
— — —
21,300 10,000 ?
The following additional information is available: a.
Manufacturing overhead is assigned to jobs on the basis of direct labor cost.
b.
Balances in the inventory accounts at January 31 were as follows: Raw Material Work in Process Finished Goods
$40,000 ? 85,000
Required: a. Prepare T-accounts for Raw Material, Work in Process Inventory, Finished Goods Inventory, and Manufacturing Overhead Control. Enter the January 31 inventory balances given previously; in the case of Work in Process Inventory, compute the January 31 balance and enter it into the Work in Process Inventory T-account. b.
Prepare journal entries for February as follows: 1.
Prepare an entry to record the issue of materials into production and post the entry to appropriate T-accounts. (In the case of direct material, it is not necessary to make a separate entry for each job.) Indirect materials used during February totaled $4,000.
2.
Prepare an entry to record the incurrence of labor cost and post the entry to appropriate Taccounts. (In the case of direct labor, it is not necessary to make a separate entry for each job.) Indirect labor cost totaled $8,000 for February.
3.
Prepare an entry to record the incurrence of $19,000 in various actual manufacturing overhead costs for February (credit Accounts Payable).
137
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
c.
What apparent predetermined overhead rate does the company use to assign overhead cost to jobs? Using this rate, prepare a journal entry to record the application of overhead cost to jobs for February (it is not necessary to make a separate entry for each job). Post this entry to appropriate T-accounts.
d.
As stated earlier, Job #205 was completed during February. Prepare a journal entry to show the transfer of this job off of the production line and into the finished good warehouse. Post the entry to appropriate T-accounts.
e.
Determine the balance at February 28 in the Work in Process inventory account. How much of this balance consists of the cost of Job #206? Job #207?
ANS: a. Raw Materials Inventory BB 40,000 31,500
Work in Process Inventory BB 77,800 29,500 60,700 20,000 32,000 98,600
Finished Goods Inventory BB 85,000 60,700
b.
1.
2.
3.
c.
Manufacturing Overhead Control 4,000 8,000 32,000 19,000
Work in Process Inventory Manufacturing Overhead Control Raw Materials Inventory
29,500 4,000
Work in Process Inventory Manufacturing Overhead Control Payroll
20,000
Manufacturing Overhead Control Accounts Payable
33,500
8,000 28,000 19,000 19,000
160%/DL COST × $20,000 = $32,000 Work in Process Inventory Manufacturing Overhead Control
32,000 32,000
138
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
d.
e.
Finished Goods Inventory Work in Process Inventory
60,700
WIP INV Job 206 = $51,300
98,600
Job 207 = $47,300
Beg WIP Direct Mat Direct Labor Factory Overhead
DIF: Moderate
60,700
JOB #205
JOB #206
JOB #207
$50,300 0 4,000 6,400 $60,700
$27,500 8,200 6,000 9,600 $51,300
$21,300 10,000 16,000 $47,300
OBJ: 4-4
139
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
3. The Pittman Company manufactures special purpose machines to order. On January 1, there were two jobs in process, #705 and #706. The following costs were applied to these jobs in the prior year: Job No. Direct material Direct labor Overhead Total
705
706
$ 5,000 4,000 4,400 $13,400
$ 8,000 3,000 3,300 $14,300
During January, the following transactions took place: * *
Raw material costing $40,000 was purchased on account. Jobs #707, #708, and #709 were started and the following costs were applied to them:
Direct materials Direct labor * * * * * * *
707
JOB 708
709
$3,000 5,000
$10,000 6,000
$7,000 4,000
Job #705 and Job #706 were completed after incurring additional direct labor costs of $2,000 and $4,000, respectively Wages paid to production employees during January totaled $25,000. Depreciation for the month of January totaled $10,000. Utilities bills in the amount of $10,000 were paid for operations during December. Utilities bills totaling $12,000 were received for January operations. Supplies costing $2,000 were used. Miscellaneous overhead expenses totaled $24,000 for January.
Actual overhead is applied to individual jobs at the end of each month using a rate based on actual direct labor costs. Required: a.
Determine the January overhead rate.
b.
Determine the cost of each job.
c.
Prepare a statement of cost of goods manufactured.
ANS: a.
MOH $4,000 + $10,000 + $12,000 + $2,000 + $24,000 =
b . DM DL MOH Beg WIP
$52,000 = $2.4762/dl cost $21,000 dl cost
JOB #705
JOB #706
JOB #707
JOB #708
JOB #709
$ 2,000 4,952 13,400 $20,352
$ 4,000 9,905 14,300 $28,205
$ 3,000 5,000 12,381 $20,381
$10,000 6,000 14,857 $30,857
$ 1,000 4,000 9,905 $20,905
140
= = = =
$
20,000 21,000 52,000 27,700 $120,700
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
c.
Beg WIP + DM + DL + MOH - End WIP
DIF: Moderate
$27,700 20,000 21,000 52,000 72,143 $48,557
OBJ: 4-4
141
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
4. The Western Corporation, began operations on October 1. It employs a job order costing system. Overhead is charged at a normal rate of $2.50 per direct labor hour. The actual operations for the month of October are summarized as follows: a.
Purchases of raw material, 25,000 pieces @ $1.20/piece.
b.
Material and labor costs charged to production:
c.
Job No.
Units
Material
Direct labor cost
Direct labor hours
101 102 103 104 105
10,000 8,800 16,000 8,000 20,000
$4,000 3,600 7,000 3,200 8,000
$6,000 5,400 9,000 4,800 3,600
3,000 2,700 4,500 2,400 1,800
Actual overhead costs incurred: Variable Fixed
$18,500 15,000
d.
Completed jobs: 101, 102, 103, and 104
e.
Sales-$105,000. All units produced on Jobs 101, 102, and 103 were sold.
Required: Compute the following balances on October 31: a.
Material inventory
b.
Work in process inventory
c.
Finished goods inventory
d.
Cost of goods sold
e. Under- or overapplied overhead ANS: a. b.
$30,000 - ($4,000 + $3,600 + $7,000 + $3,200 + $8,000) = $4,200 Job #105 $8,000 + $3,600 + ($1,800 × 2.50) = $16,100
c.
Job #104
d.
Job #
e.
Applied 14,400 × $2.50 = Actual Overapplied
$3,200 + $4,800 + ($2,400 × 2.50) = $14,000 101 102 103
DIF: Moderate
$4,000 + $6,000 + ($3,000 × 2.50) = $3,600 + $5,400 + ($2,700 × 2.50) = $7,000 + $9,000 + ($4,500 × 2.50) =
$36,000 33,500 $ 2,500
OBJ: 4-4
142
$17,500 15,750 27,250 $60,500
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
Steel Company. Steel Company uses a job order costing system and develops its predetermined overhead rate based on machine hours. The company has two jobs in process at the end of the cycle, Jobs #177 and #179. Budgeted overhead Budgeted machine hours Raw material Labor cost
$100,300 85,000 $ 63,000 $ 50,000
5. Refer to Steel Company. What amount of overhead is charged to Jobs #177 and #179? Machine hours are split between Jobs #177 and #179-65 percent and 35 percent, respectively. Actual machine hours equal budgeted machine hours. ANS: OH Applied = MH Cost × POHR Job #177: 85,000 MH × 65%= 55,250 × $1.18 = $65,195 Job #179: 85,000 MH × 35%= 29,750 × $1.18 = $35,105 DIF: Easy
OBJ: 4-4
6. Refer to Steel Company. Fifty-four percent of raw material belongs to Job 17 and 38 percent belongs to Job 179, and the balance is considered indirect material. What amount of raw material used was allocated to overhead as indirect material? ANS: 54% + 38% = 92%; this means that 8% is indirect or $5,040 (.08 × $63,000). DIF: Easy
OBJ: 4-4
7. Refer to Steel Co. Labor cost was split 25 percent and 70 percent, respectively, between Jobs #177 and #179 for direct labor. The remainder was indirect labor cost. What are the total costs of Jobs #177 and #179? ANS:
DM DL MOH
DIF: Moderate
Job #177
Job #179
$ 34,020 12,500 65,195 $111,715
$23,940 35,000 35,105 $94,045
OBJ: 4-4
143
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
8. Sanderson Company manufactures custom-built conveyor systems for factory and commercial operations. Erin Smith is the cost accountant for Sanderson and she is in the process of educating a new employee, Heather Fontenot about the job order costing system that Sanderson uses. (The system is based on normal costs; overhead is applied based on direct labor cost and rounded to the next whole dollar.) Lisa gathers the following job order cost records for July:
Job No.
Direct Materials
Direct Labor
Applied OH
Total Cost
667 669 670 671 672
$ 5,901 18,312 406 51,405 9,615
$1,730 1,810 500 9,500 550
$ 1,990 2,082 575 10,925 633
$ 9,621 22,204 1,481 71,830 10,798
To explain the missing job number, Erin informed Heather that Job #668 had been completed in June. She also told her that Job #667 was the only job in process at the beginning of July. At that time, the job had been assigned $4,300 for direct material and $900 for direct labor. At the end of July, Job #671 had not been completed; all others had. Erin asked Heather several questions to determine whether she understood the job order system. Required: Help Heather answer the following questions: a.
What is the predetermined overhead rate used by ABC Company?
b.
What was the total cost of beginning Work in Process inventory?
c.
What was total prime cost incurred for the month of July?
d.
What was cost of goods manufactured for July?
ANS: a.
Use any job started in July: Rate =
b.
c.
MOH DL COST
DM DL FOH
JOB $670
$4,300 900 1,035 $6,235
$575 $500
($900 × 115%)
Prime Cost =DM + DL DM = $85,639 - 4,300 = $81,339 DL = 14,090 900 = 13,190 $94,529
d.
COGM
DIF: Easy
=
$9,621 + 22,204 + 1,481 + 10,798 =
OBJ: 4-4
144
$44,104
= 115%/DL Cost
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
9. Perry Company uses a job order costing system and has the following information for the first week of June: 1.
Direct labor and direct materials used: Job No.
Direct Material
Direct Labor Hours
498 506 507 508 509 511 512 Total
$1,500 960 415 345 652 308 835 $5,015
116 16 18 42 24 10 30 256
2.
The direct labor wage rate is $4 per hour.
3.
The overhead rate is $5 per direct labor hour.
4.
Actual overhead costs for the week, $1,480.
5.
Jobs completed: Nos. 498, 506, and 509.
6.
The factory had no work in process at the beginning of the week.
Required: a. Prepare a summary that will show the total cost assigned to each job. b.
Compute the amount of overhead over- or underapplied during the week.
c.
Calculate the cost of the work in process at the end of the week.
ANS: a. Job No. 498 506 507 508 509 511 512
DM $1,500 960 415 345 652 308 835 $5,015
DL $
464 64 72 168 96 40 120 $1,024
b.
Actual MOH Applied MOH Underapplied
$1,480 1,280 $ 200
c.
JOB
$
507 508 511 512 Ending WIP
DIF: Easy
577 723 398 1,105 $2,803
OBJ: 4-4
145
OH
Total
580 80 90 210 120 50 150 $1,280
$2,544 1,104 577 723 868 398 1,105 $7,319
$
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
10. You are asked to bring the following incomplete accounts of Andrepont Printing, Inc. up to date through January 31,20X5. Consider the data that appear in the T-accounts as well as additional information given in items (a) through (i). Andrepont’s job order costing system has two direct cost categories (direct material and direct manufacturing labor) and one indirect cost pool (manufacturing overhead, which is allocated using direct manufacturing labor costs). Materials Inventory Control 12/31/20X4 Balance 15,000
Wages Payable Control 1/31/20X5 Balance 3,000
Manufacturing Department Overhead Control January 20X5 Charges 57,000
Work in Process Inventory Control
Manufacturing Overhead Control
Finished Goods Inventory Control 12/31/20X4 Balance 20,000
Cost of Goods Sold
Additional Information: a. Manufacturing department overhead is allocated using a budgeted rate set every December. Management forecasts next year's overhead and next year's direct manufacturing labor costs. The budget for 20X5 is $400,000 of direct manufacturing labor and $600,000 of manufacturing overhead. b. The only job unfinished on January 31, 20X5 is No. 419, on which direct manufacturing labor costs are $2,000 (125 direct manufacturing labor hours) and direct material costs are $8,000. c. Total material placed into production during January is $90,000. d. Cost of goods completed during January is $180,000. e. Material inventory as of January 31, 20X5 is $20,000. f. Finished goods inventory as of January 31, 20X5 is $15,000. g. All plant workers earn the same wage rate. Direct manufacturing labor hours for January totals 2,500. Other labor and supervision totals $10,000. h. The gross plant payroll on January paydays totals $52,000. Ignore withholdings. All personnel are paid on a weekly basis. i. All "actual" manufacturing department overhead incurred during January has already been posted. Required: a. Material purchased during January b. Cost of Goods Sold during January c. Direct Manufacturing Labor Costs incurred during January d. Manufacturing Overhead Allocated during January
146
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
e. f. g. h. i.
Balance, Wages Payable Control, December 31, 20X4 Balance, Work in Process Inventory Control, January 31, 20X5 Balance, Work in Process Inventory Control, December 31, 20X4 Balance, Finished Goods Inventory Control, January 31, 20X5 Manufacturing Overhead underapplied or overapplied for January
ANS: a.
$15,000 + Purchases - $20,000 = $90,000. Purchases = $95,000
b.
$20,000 + $180,000 - $15,000 = $185,000
c.
DL = $2,000 = $16/HR × 2,500 HRS = $40,000 125
d.
$600,000 = 150% DL cost × $40,000 = $60,000 $400,000
e.
BEGIN + $50,000 - $52,000 = $3,000 BEGIN = $5,000
f.
$2,000 + ($2,000 × 150%) + $8,000 = $13,000
g.
BEGIN + $90,000 + $40,000 + $60,000 - $180,000 = $13,000
h.
$20,000 + $180,000 - $185,000 = END = $15,000
i.
APPLIED ACTUAL
DIF: Moderate
$60,000 57,000 $ 3,000 overapplied OBJ: 4-4
147
BEGIN = $3,000
To download more slides, ebook, solutions and test bank, visit http://downloadslide.blogspot.com
11. Beauty Company manufactures picture frames of all sizes and shapes and uses a job order costing system. There is always some spoilage in each production run. The following costs relate to the current run: $160,000 $ 25,000 $ 11,500 100,000
Estimated overhead (exclusive of spoilage) Spoilage (estimated) Sales value of spoiled frames Labor hours
The actual cost of a spoiled picture frame is $7.00. During the year 170 frames are considered spoiled. Each spoiled frame can be sold for $4. The spoilage is considered a part of all jobs. a. b. c.
Labor hours are used to determine the predetermined overhead rate. What is the predetermined overhead rate per direct labor hour? Prepare the journal entry needed to record the spoilage. Prepare the journal entry if the spoilage relates only to Job #12 rather than being a part of all production runs.
ANS: a. b.
c.
$160,000 + $25,000 - $11,500 = $173,500 $173,500/100,000 = $1.735 per DLH Disposal Value of Spoiled Work Manufacturing Overhead Work in Process Inventory Disposal Value of Spoiled Work Work in Process Inventory-Job #12
DIF: Moderate
680 510 1,190 680 680
OBJ: 4-8
148
View more...
Comments
