Terex Cedar Rapids Trxs6203ecr9j0776 (1)
Short Description
TEREX SCREEN 6203...
Description
Parts Replacement Manual
CEDARAPIDS
Model TSH6203-32 Vibrating Flat Screen Serial Number: TRXS6203ECR9J0776
Parts Replacement Manual
CEDARAPIDS Table of Contents BOM
Description
Page
Serial Number TRXS6203ECR9J0776 499992520209 03144HS 03171FJ 03170DB 031281676001 07371023 031320640000 07532005 05077SBL 03113DM 03172DBG 03172CAX 01376AZC 03144HU 03172BF 03172DBK 03172AAM
Operation Manual Menu Sheet Carriage Bolts for Clamp Bars Coil Spring Option - Flat Screen Discharge Lip w/ Liners Drive Parts - Adjustable Speed Sheave Drive Parts - Bushing, Motor Drive Parts - Driven Sheave Drive Parts - V-Belt Emblem - Sheave Guard Emblems Assembly - ANSI Feedbox Assembly Final Parts, Tagline & Tensioner Lockout / Tagout Kit Motor Mount Assy Shaft, Bearing, Seals, Covers & Weights Support - Baseframe & Snubber Assy Vibrating Basket & Huckbolt Locations
1 3 5 7 9 11 13 15 17 19 21 23 27 29 31 35 37
File Copy Menu Sheet Operation and Maintenance Instructions Standard Crushing/Screening Components The following publications compose the Operation and Maintenance Manuals for this serial number.
Equipment Description: Terex Flat Screen X Terex Flat Screen
23922
Part No. 49999-252-02-09
Mother language: English This part number includes two manuals (Vol 1-Ops and Vol 2- Service) NOTE A Crushing & Screening Safety Manuals must be included with all Manual Shipments, and must be printed in the same language as the Operation and Maintenance manual. This sheet is a permanent record of publications supplied with the initial equipment order. • For new equipment orders - The safety manual is included (shrink wrapped) with the Operation and Maintenance manual and supplied with the equipment at the time of shipment. • For reprint manual orders - Include one (1) copy of the safety manual with each order. When placing a reprint order, be sure to verify and specify the desired printed language where the manual order is being shipped. X
8/16/2006
English Safety Manual .................................. 20776 French Safety Manual ................................... 21021 Spanish Safety Manual .................................. 21022 German Safety Manual ................................. 21023
1
2
Parts Manual
CEDARAPIDS Carriage Bolts for Clamp Bars Parts List No 3144HS
Screen Side Plate
5 1
2 3 4 6
NOTE: Illustration shown is typical. Some items may vary in appearance depending on application.
Ref. No.
1 2 3 4 5 6
Part Number
Description
Quantity
0119A-05 Reference Only 7465-002 00-745-040-0010 Reference Only Reference Only
Carriage Bolt, 5/8" x 4-1/2" Washer, - See Final Parts Washer, 5/8" Flat Hex Nut, 5/8" Clamp Bar, - See Final Parts Wire Cloth, See Wire Cloth Options
As Req As Req As Req -
3 XS146C-139 (7/99)
To order parts give part name, number & machine serial number.
4
Parts Manual
CEDARAPIDS
Coil Spring Option - Flat Screens Parts List No
03171FJ
Note: Typical screen arrangement is shown. Some models may use alternate spring configurations or a different number of springs.
Existing Spring Bracket 1-8 1-12
1-6 1-8 Existing Spring Pad
Ref. No.
1-4 1-6 1-8 1-12 1-15 1-16
Part Number
Description
Quantity
03174-340-55 Instruction Drawing - Coil Spring Installation 09450-783-07 Spring, Helical Compression 03172-341-07 Guide, Spring Tapered (weldment) 03172-320-30 Cover, Coil Spring - 9" Flexible Hose Following items fill empty holes left by removal of Tagline Assembly - Not Shown 07383-121 Capscrew, 3/4" x 2-3/4" 07386-008 Hex Nut, 3/4" Locking
8 16 8 2 2
NOTE: Consult Product Support department for additional information.
5 XS146C-273 Rev B (4/08)
To order parts give part name, number & machine serial number.
6
Parts Manual
A Terex Company
Discharge Lip w/ Liners Parts List No 3170DB
1
8
5 6 7
9 10 11
2 3 4
Key
Part Number
Description
Quantity
1 2 3 4 5 6 7 8 9 10 11
3170-340-12 7383-101 7465-002 7386-007 7383-071 7465-001 7386-005 3170-340-13 7072-102 7465-001 7386-005
Lip, Discharge Capscrew, 5/8" x 1-3/4" Washer, 5/8" Hex Nut, Locking 5/8" Capscrew, 1/2" x 1-3/4" Washer, 1/2" Hex Nut, Locking 1/2" Liner, Discharge Lip Carriage Bolt, 1/2" x 1-1/2" Washer, 1/2" Hex Nut, Locking 1/2"
1 4 4 4 6 12 6 1 5 5 5
* Note: Quantities shown are for one Discharge Lip assembly. Total quantities are based on the number of screen decks.
7 XS146C-75 (6/98)
To order parts give part name, number & machine serial number.
8
Parts Manual
CEDARAPIDS
Adjustable Speed Sheave Part No. 03-128-167-6001
6 1 1
4
2 5
Item No.
3
Part Number
Description
Quantity
1
03-170-000-5270
Spacers, Sheave
3
2
03-128-167-6001-01
Sheave, Hub Side
1
3
03-128-167-6001-02
Sheave, Adjusting Side
1
4
03-170-000-5570
Bolt, 1/2" Adjustable Sheave
5
5
07386-005
Locknut, 1/2" Sheave
5
6
Reference Only
See Screen Drive Assembly
-
9 XS146C-7 Rev (9/99)
To order parts give part name, number & machine serial number.
10
Parts Manual
CEDARAPIDS
Screen Drive Components
7 6
8 1
9
4
#5 Locking Assembly
2
3
Note: Typical illustration shown. Appearance and quantities of specific components may vary depending on configuration.
Key
1 2 3 4 5 6 7 8 9
Part Number
Description
Quantity
Reference Only Reference Only Reference Only Reference Only Reference Only Reference Only 07371-023 Reference Only Reference Only
V-Belt, Drive See Motor Mount Assembly - Elsewhere in this manual Motor, Electric - Consult Motor Manufacturer Information Driven Sheave Assembly See Shaft, Bearing, & Seal Assembly - Elsewhere in this manual See Adjustable Speed Sheave - Elsewhere in this manual Bushing with Key - "SF" 2-3/8" Bore Emblem, Motor RPM See Belt Tensioner Assembly - Elsewhere in this manual
1 -
11 25154 (10/08)
To order parts give part name, number & machine serial number.
12
Parts Manual
CEDARAPIDS
Screen Drive Components
7 6
8 1
9
4
#5 Locking Assembly
2
3
Note: Typical illustration shown. Appearance and quantities of specific components may vary depending on configuration.
Key
1 2 3 4 5 6 7 8 9
Part Number
Description
Quantity
Reference Only Reference Only Reference Only 03-132-064-0000 Reference Only Reference Only Reference Only Reference Only Reference Only
V-Belt, Drive See Motor Mount Assembly - Elsewhere in this manual Motor, Electric - Consult Motor Manufacturer Information Driven Sheave Assembly See Shaft, Bearing, & Seal Assembly - Elsewhere in this manual See Adjustable Speed Sheave - Elsewhere in this manual Bushing with Key Emblem, Motor RPM See Belt Tensioner Assembly - Elsewhere in this manual
1 -
13 25154 (10/08)
To order parts give part name, number & machine serial number.
14
Parts Manual
CEDARAPIDS
Screen Drive Components
7 6
8 1
9
4
#5 Locking Assembly
2
3
Note: Typical illustration shown. Appearance and quantities of specific components may vary depending on configuration.
Key
1 2 3 4 5 6 7 8 9
Part Number
Description
Quantity
07532-005 Reference Only Reference Only Reference Only Reference Only Reference Only Reference Only Reference Only Reference Only
V-Belt, Drive - HD1670 As Req See Motor Mount Assembly - Elsewhere in this manual Motor, Electric - Consult Motor Manufacturer Information Driven Sheave Assembly See Shaft, Bearing, & Seal Assembly - Elsewhere in this manual See Adjustable Speed Sheave - Elsewhere in this manual Bushing with Key Emblem, Motor RPM See Belt Tensioner Assembly - Elsewhere in this manual -
15 25154 (10/08)
To order parts give part name, number & machine serial number.
16
Parts Manual
CEDARAPIDS Sheave Guard Emblem Parts List No 05077SBL
DANGER ENTANGLEMENT HAZARD Contact with moving belts can result in serious injury or death.
1
DO NOT OPERATE THIS MACHINERY WITHOUT GUARDS IN PLACE. This machinery IS NOT equipped with a guard to prevent accidental contact with the drive mechanism. Purchaser is responsible for providing and installing any guards which may be required by Federal, State, or local statutes or regulations.
04490-400-07
2
04490-400-07-01
Ref. No.
1 2
Part Number
Description
Quantity
04490-400-07 04490-400-07-01
Emblem, ANSI Sheave Guard (05077SBL) Emblem, ISO Sheave Guard (05077SBM)
1 1
Note: One of these emblems will be attached to any equipment sold without guards.
17 24077 (10/06)
To order parts give part name, number & machine serial number.
18
Parts Manual
CEDARAPIDS Emblems Assembly - ANSI Parts List No 03113DM
(Far Side) 1-3 1-4
(Far Side) 1-6
(Both Sides) 1-12
(Drive Side)
(Drive Side)
(Both Sides)
1-10
1-14
1-13
1-5 (Near Side)
1-9 (Drive Side)
Ref. No.
1-3 1-4 1-5 1-6 1-7 1-8 1-9 1-10 1-12 1-13 1-14
1-7 (Both Sides)
1-8 (Both Sides)
See Sheave Guard Emblem
Part Number
Description
04493-023 07073-015 04418-955 04418-031 04493-500-16 04493-500-14 04493-500-12 04493-500-15 04494-104-67 04491-500-18 04491-500-17
Emblem, Serial Plate Screw, #6 x 3/8" Drive Emblem, USA Flag Emblem, Patent Plate Emblem, Oil Lubrication Emblem, Oil Level Emblem, Screen RPM Range Emblem, Rotation Arrow Emblem, Terex-CRI 48" Emblem, General Safety Emblem, Entanglement Hazard
Quantity
1 4 1 1 2 2 1 1 2 2 1
19 XS146C-329 (10/06)
To order parts give part name, number & machine serial number.
20
Parts Manual
A Terex Company
Feedbox Assembly Parts List No 3172DBG
4 5 7 8
2 5 7 8
1 9 10 11
Item No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
3 6 7 8
12 13 14 15
12 13 14 15
NOTE: Typical illustration shown. Quantities of some items may vary depending on application.
Part Number
Description
3172-341-32 03-158-000-0140 03-158-000-0110 03-158-000-0120 7072-102 7072-194 7386-005 7465-001 7383-102 7386-007 7465-002 7383-073 7386-005 7465-001 Not Required
Feedbox, 6' x 24" Liner, Bottom Liner, Side Liner, Back Carriage Bolt, 1/2" x 1-1/2" Carriage Bolt, 1/2" x 1-3/4" Hex Nut, 1/2" Locking Washer, 1/2" Flat Hardened Capscrew, 5/8" x 2" Locknut, 5/8" Washer, 5/8" Flat Hardened Capscrew, 1/2" x 2-1/4" Locknut, 1/2" Washer, 1/2" Flat Hardened Capscrew, 1/2" x 3"
Quantity
1 1 2 1 15 6 21 21 16 16 16 6 6 12 -
21 XS146C-278 (10/02)
To order parts give part name, number & machine serial number.
22
Parts Manual
A Terex Company
Final Parts 9 26 10 26
DANGER
This equipment may have been sold without certain guards. Purchaser is responsible for providing & installing appropriate guards before operation.
9
11
12 13
23 3 4 5
24 27 28 29
14 15 16 17
20 6 7 8
18 2 1
NOTE: Illustration shows a typical screen arrangement. Some units may vary depending on the application.
19
23 XS146C-255 (4/01)
03172CAX.p65
To order parts give part name, number & machine serial number.
Parts Manual
A Terex Company
Final Parts Reference No 3172CAX
Key
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29
Part Number
Description
Quantity
3172-320-12 Tailgate, Center and Bottom Deck 3172-320-13 Strap, Tailgate Not Required Capscrew Not Required Washer, Flat Not Required Hex Nut, Locking 7072-194 Carriage Bolt, 1/2" x 1-3/4" 7465-001 Washer, 1/2" 7386-005 Hex Nut, 1/2" Locking 3144-320-11 Drawplate, Standard - 5" x 48" 45890-255-44 Washer, 5/8" Spherical 3172-320-18 Belt Guard - RH Not Required Base Bracket, Belt Guard 3172-320-20 Bracket, Belt Guard 3172-320-02 Bracket, Motor Mounting 7383-070 Capscrew, 1/2" x 1-1/2" 7014-020 Washer, 1/2" 7386-005 Hex Nut, 1/2" Locking 7012-029 Hex Nut, 5/8" Locking 03-132-300-0000 Bar, Location Weight Reference Only See Tagline Assembly - This Section 01-874-000-0008 Socket, Locking (Not Shown) 03-132-060-0000 Wrench, Timing (Not Shown) Reference Only See Gear Case Assembly - This Section 03-170-000-6610 See Belt Tensioner - Following Pages 4418-244 Screen Gauge Emblem (Not Shown) Reference Only See Clamp Bar Bolts - This Section Hardware to Mount Belt Tensioner 7383-102 Capscrew, 5/8" x 2" 7465-002 Washer, 5/8" Hardened Flat 7386-007 Hex Nut, 5/8" Locking
2 2 8 8 8 12 12 12 30 126 1 1 1 6 8 6 3 2 1 1 1 1 2 4 2
24 XS146C-255 (4/01)
03172CAX.p65
To order parts give part name, number & machine serial number.
Parts Manual
A Terex Company
Tagline Assembly
1
6
11
10
9
2 3 4 8
7
11 12
5 NOTE: All Models of Flat Screens utilize this parts assembly.
Key 1 2 3 4 5 6 7 8 9 10 11 12 13
Part Number
Description
03-162-000-3940 7383-130 7386-008 03-162-000-3990 03-162-000-3950 03-162-000-3980 3144-340-63 7513-912 7465-003 7383-118 03-162-000-3960 7383-122 7386-008
Tension Band Capscrew, 3/4" x 5" Locknut, Nylon 3/4" Bushing Bracket, Take-up Bracket, Tag Line Rod, Take-up Nut, Coil 3/4" Washer, 3/4" Capscrew, 3/4" Bracket, Sideplate Capscrew, 3/4" x 3" Hex Nut, Locking 3/4"
Quantity 1 2 3 2 1 1 1 1 1 1 1 2 2
25 XS146C-4 Rev (6/98)
03172CAX.p65
To order parts give part name, number & machine serial number.
Parts Manual
A Terex Company
Belt Tensioner Assembly Reference No 03-170-000-6610
1
2
4 7 5
6
3
11
12 13 14 10
Key
1 2 3 4 5 6 7 8 9 10 11
9
Part Number
Description
7253-036 7281-023 03-120-080-00-20 3144-320-08 00-591-201-00-00 7465-014 7383-041 7386-003 03-120-086-00-30 01-372-206-20-00 03-170-000-11-40
Snap Ring Ball Bearing, Idler Pulley - 30mm Pulley, Idler Swing Arm, Belt Tensioner Pillow Block Bearing Washer, 3/8" Capscrew, 3/8" x 3/4" Locknut, Nylon 3/8" Bracket, Tensioner Mounting Spring, Tensioner Retainer Clip, Spring
8
Quantity
1 2 1 1 2 4 5 5 1 1 1
26 XS146C-8 Rev (6/98)
03172CAX.p65
To order parts give part name, number & machine serial number.
Parts Manual
A Terex Company
Lockout / Tagout Kit Parts List No
1376AZC
1
c k o
o
L
6
5
u t -
FED
T u
o
a g t K
ER
it
AL
k
o
u
t
-
T
a
g
o
u
t
K
it
Add
v
Lla
o L
GIS
TER
DA DANG DANGER DANGER NGER DA ER NG ER
CK CK CK CK CK LO LO LO LO LO & E&D E&D E&D E&D ED G OVG OVG OVG OVG OV TA MTA E MTA E MTA E MTA E M E IS RIES THRIS ETDHRIS ETDHRIS ETDHR ETDH ED TH BETH BYBETH ISBTYBETH ISBTYBETH ISBTYBE ISBTY IST TO LYTO NLLYTO NLLYTO NLLYTO NLLY N L ON SOON CRKS.OON CRKS.OON CRKS.OON CRKS. O CK. R PE BPAE BPAE BPAE BPAE BA ON ON ON ON ON
b
c
ER R G R ROut NGE E A N O ajo DANGER uot B RckkPeeuddO InG O DANGEER esOt _t B_a_j_o L t LoR G I e c R o dO sO_t_uo B_a_j_o ___ DANGPEEEqRuLipmm/IeEnG e _ tquLipoR u e _ kP sO_t_uo_t jo __ poPocoreu_dO DANGPEEEqRuLbipym/ILeElanG e_ _t B_ha_a__ ___ qvtueLi oR _ uo c cokPr O o P p L DANGPEEEqRuLbipym/ILeElanG e_/sO_Ft_et B_ha_aj_o__ ___ i kaPretu_edO qvtue oR c o o D eu_de_/sO_Ft_uoe_tcB_ha_aj_o______ DANGPEEEqRuLbipym/ILeElanG tqueLipPR v kP e sO_t_uoe_c jo __ _ F __ poPoDcoaretu_edO DANGPEEEquLbipym/ILeElanG kP e_/sO_t_uoe_tcB_ha_ajo ____ qvtueLi oR pPoDcoaretu_edO DANGPEEquLbipym/ILeElanG e_/ F _t B_ha_a__ ___ kaPr t O qvtueLi oR _ u c o c t _ _ o e o O o s pPD eu_ede_/_F t B_ha_aj__ ___ DA PEEquLbipym/ILeElanG kP qvtueLi oR pPoDcoar t sO_Ft_uoe_c j_o___ _ D PEEquLbipym/ILeElanG qvtueLi oocokaPretu_ede_/s_t_oe_cB_ha_a_ ____ D P p L i p L y i t e u PEEqubipym/LeElanqvueipPoDoaPrtu__ee__//_FF_e_c_h_aa __________ P Equby /LElaqve PDoarte / Fecha ___
RE
ition of te al instr ucti xt. P kit in lease ons ar e refe ste a r to availa d Add o ble , ition f tryin the in g to form but no a l of te instr t r a ucti ead th tion p in this xt. Ple o is rov blo n ti s kit in ase id n c refe are av y text. ed wit k ste ad a h th r il to a of tr ble is , bu ying the in form t no to r t in ati ead this on pro this b lo v tiny ide d w ck tex t. ith this
h e Dat / Fec e Dat
3
4 2
Ref. No.
1 2 3 4 5 6
Part Number
Description
Quantity
46000-004-09 Included in Kit Included in Kit Included in Kit Included in Kit Included in Kit Included in Kit
Kit, Lockout / Tagout Padlock, 1-1/2" - With keys Hasp, Lockout 1-1/2" Tag, Lockout (Bilingual - English/Spanish) Booklet, Training - Lockout Lockout / Tagout Federal Register Standard Tool Box, Plastic w/ Cedarapids Logo
As Req 5 5 10 5 1 1
27 XS29-961 (6/01)
To order parts give part name, number & machine serial number.
28
Parts Manual
A Terex Company
Motor Mount Assembly Reference No 3144HU
1 2 3 13
9
10 11 12
6
7
8 14 15
4
5 8 14 15 Ref. No.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Part Number
Description
7383-122 7465-003 7386-008 03-166-000-0030 3144-330-02 3144-330-03 3144-330-04 3144-330-05 7383-102 3154-003-82 7465-002 7386-106 7386-007 7513-916 7465-002 7386-007
Capscrew, 3/4" x 3" Washer, 3/4" Hex Nut, Locking 3/4" Motor Mount Assembly Support, Motor - Right Hand Support, Motor - Left Hand Stiffener, Motor Rail, Motor Mount Capscrew, 5/8" x 2" Bar Washer, 5/8" Capscrew, 5/8" x 3" Hex Nut, Locking 5/8" Hex Nut, Coil Thread 1" Washer, 5/8" Hex Nut, Locking 5/8"
Quantity
6 6 6 1 1 2 2 16 2 12 4 4 4 16 16
29 XS146C-80 Rev (10/98)
03144HU.p65
To order parts give part name, number & machine serial number.
30
Parts Manual
CEDARAPIDS Gear Case Covers 13 14 15
6
2
9
8
4
5 7
Key 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Part Number 7024-002 03-126-168-0000 3172-310-08 3172-310-07 03-126-172-0000 Not Required 7383-228 7383-039 7386-003 45890-255-21 7027-004 45995-001-09 7052-008-01 7107-009 7304-019
XS146C-85 (3/03)
3 10
1
11
NOTE: Standard (RH) Right hand drive parts arrangement shown. Left hand is opposite.
Description Pipe Plug Plate, Inspection Cover, Case - Gear Side Cover, Case - Impulse Side Cover, Timing Tab, Case Cover Oil Level Capscrew, 3/8" x 3/4" Capscrew, 3/8" x 1-1/4" Locknut, 3/8" Nylon Washer, 3/8" Copper Drain Plug, 1" Magnetic Sealant, Silicone 10.3 oz (Not Shown) Breather Cap, 1/4" Water Shield Bushing, 1/4" x 3/4" Bell Reducer, 3/4" x 1-1/2" 03172BF.p65
Quantity 2 5 1 1 1 2 54 132 132 54 2 1 2 2 2
31
To order parts give part name, number & machine serial number.
Parts Manual
CEDARAPIDS Shaft, Bearing, & Seal Assemblies NOTE: Typical illustration is shown. Appearance and quantity of some items vary depending on application.
18
32
19
1
3
4 17
22
18
19
20
8 22 15
7 2
9
18
17 19 10
32 11
1
12
14
14
33
10 13 16
33
15 21
19 5 4
25
8
3 9
7
28
6
17
27
31
20
20
29 23 30 24
32 XS146C-272 Rev (3/06)
26
03172BF.p65
To order parts give part name, number & machine serial number.
Parts Manual
CEDARAPIDS Shaft, Bearing, & Seal Assemblies Reference No 3172BF
Key
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
{
Part Number
Description
Quantity
03-132-171-0000 03-132-271-0000 7032-019 03-132-188-0000 03-132-187-0000 7394-242 7383-291 3170-310-03 7028-537 7383-243 3108-300-05 3108-001-28-01 49999-187 7383-235 03-120-242-0020 03-128-192-0010 3144-310-16 7033-028 7030-028 03-132-145-0010 03-132-147-0010 7383-249 03-132-299-0010 03-132-143-6020 03-132-144-6020 7383-228 45890-255-21 03-126-267-0000 3172-310-04 45203-014 Reference Only 03-132-303-0010 7242-034 7051-008 Reference Only Reference Only
Disc, Gear Weight 3 Disc, Impulse 3 Bearing, Roller 6 * Weights, Outside 6 * Weights, Inside 6 Capscrew, 3/4" NF x 7" (Prior to 2/05) As Req Capscrew, 3/4" NC x 7" (Beginning 2/05) As Req Strap, Retaining 6 Pin, Dowel 12 Capscrew, 1/2" x 3/4" 12 Gear Set - Complete 1 Gear, Spur 3 Card 1 Capscrew, 5/8" x 1-3/4" 3 Tab, Gear Retaining 3 Key Bolt 3 Lockwasher, No-Weld 6 Lockwasher, 6-13/32" 6 Locknut, SKF 6.2028 6 Hub, Gear Side 3 Hub, Impulse Side 3 Capscrew, 3/8" x 1" 72 Locking Assembly - 3" Piloted 7 Shaft, Drive 1 Shaft, Timing 2 Capscrew, 3/8" x 3/4" 6 Washer, Copper 6 Washer, Oil Seal Housing 1 Housing, Oil Seal 1 Oil Seal, Labyrinth 1 See Screen Drive - Elsewhere in this manual Ring, Barrier 1 Setscrew 4 Nipple, 1/4" Grease 1 See Vibrating Basket - Elsewhere in this manual See Gear Case Covers - Prior Pages -
* Note: Beginning in February 2005, item 4 & 5 weights should be tapped for coarse thread hardware (Item #6). When ordering replacement weights, coarse threaded hardware should be used on newer units. Consult factory if unsure of hardware used.
33 XS146C-272 Rev H (3/06)
03172BF.p65
To order parts give part name, number & machine serial number.
Parts Manual
CEDARAPIDS Plug Weights
Inside or Outside Weight
1
Note: Standard Assembly 2 Plug weights per Disc leaving center Plug Weight hole open.
Ref. No.
1
Part Number
Description
Quantity
03-170-000-1450
Weight, Plug
As Req.
34 XS146C-87 (3/03)
03172BF.p65
To order parts give part name, number & machine serial number.
Parts Manual
A Terex Company
Support- Baseframe Reference No 3172DBK
NOTE: Typical illustration shown. The quantity and arrangement of some items vary depending on application.
5 FS
4 6 7 8
9 10 1
5 FS
2
3 6 7 8
Key
1 2 3 4 5 6 7 8 9 10 11
9 10
11
Part Number
Description
3172-341-22 Consult Factory 3176-300-23 3176-300-23 3144-340-30 7383-119 7386-008 7465-003 Reference Only Reference Only Reference Only
Frame, Base Pad, Spring Shipping Bracket (Intake End) Shipping Bracket (Discharge End) Flat, Clamping - Shipping Bracket (Not Shown) Capscrew, 3/4" x 2-1/4" Hex Nut, 3/4" Locking Washer, 3/4" Hardened Flat Coil or Rubber Spring - See Spring Option Page, This Section Spring Guide - See Spring Option Page, This Section See Snubber Assembly - Following Page
Quantity
1 8 2 2 4 16 16 16 -
35 XS146C-271 (8/01)
To order parts give part name, number & machine serial number.
Parts Manual
A Terex Company
Snubber Assembly 6
4
7 5
1
3
Ref. No.
1 2 3 *4 5 6 7
2 Note: Quantities shown are for (4) four double snubber assemblies.
Part Number
Description
Quantity
7017-034 03-170-000-4562 7383-101 03-170-000-1880 7012-029 03-170-000-0320 4431-731
Hex Nut, 1 - 1/4" Backplate, Snubber Capscrew, 5/8" x 1 3/4" Housing, Double Snubber Hex Nut, 5/8" Snubber Rubber Snubber Cup & Allthread
8 4 16 4 16 8 8
* Item #4 is supplied as a weldment on screens with baseframes or it is shipped loose for screens with the baseframe not supplied.
36 XS146C-3 Rev (6/98)
To order parts give part name, number & machine serial number.
Parts Manual
A Terex Company
Vibrating Basket Assembly
12 1 12 2
22 35 36 37 34
13 10 9 21 11
4 23 15 7
5
3 6
27
20 13
16
24
8
17
31 33
10
17 18
32 25
19
26 28
NOTE: Typical Basket Assembly shown. Some arrangements may have crown decks, divided decks or other combinations.
29
17 18 19
30 15
37 XS146C-256 (4/01)
03172AAM.p65
To order parts give part name, number & machine serial number.
Parts Manual
A Terex Company
Vibrating Basket Assembly Reference No 3172AAM Key
1 2 3 4 5 6 7
{
8 9 10 11 12 13
{ {
14 15 16 17
{ {
18 19 20 21 22 23 24 25 26
{
27 28 29 30 31 32 33 34 35 36 37
{
Part Number
Description
Quantity
3172-300-60 3172-300-61 3172-300-62 3172-300-70 3172-300-71 3172-300-70 3172-300-68 3172-300-69 Consult Factory Consult Factory 3172-300-57 3172-300-58 3172-300-66 3172-300-67 3172-301-14 3172-301-15 3144-300-19 3144-300-19 7511-124-28 7511-124-20 45890-255-52 45259-508-62 45890-255-51 7510-224 3172-300-55 3172-300-79 3176-300-20 Reference Only 3144-300-20 7383-074 7386-005 7465-001 03-100-165-6000 00-75A-048-0000 7465-003 7399-021 00-420-002-2750 03-126-063-6006 03-132-003-0020 3176-320-03 7072-053 7386-003 7465-014 7014-003
Sideplate - RH Sideplate - LH Plate, Reinforcing Deck, Top Deck, Center Deck, Bottom - Side Tension Angle, Stiffener - RH Angle, Stiffener - LH (Not Shown) Pad, Snubber - Feed End Pad, Snubber - Discharge End Spacer Spacer Bracket, Discharge Angle - LH Bracket, Discharge Angle - RH Bracket, Feed End Angle - LH Bracket, Feed End Angle - RH Case, Wheel LH (Not Shown) Case, Wheel RH Huckbolt, 3/4" x 1-3/4" Huckbolt, 3/4" x 1-1/4" Washer, 1" Hardened O-Ring Washer, 3/4" Hardened Huckcollar, 3/4" Flanged Bracket, Spring Bracket, Spring Strip, Reinforcing See Gear Case Assembly - This Section Strap for Guard Capscrew, 1/2" x 2-1/2" Locknut, 1/2" Nylon Washer, 1/2" Guard, Tube Hex Nut, 3/4" NF Washer, 3/4" Capscrew, 3/4" NF x 4" O-Ring Tube, Shaft Spindle, Bearing Cover, Access Carriage Bolt, 3/8" x 1-1/4" Hex Nut, 3/8" Washer, 3/8" Hardened Flat Lockwasher, 3/8"
1 1 2 1 1 1 1 1 2 2 6 2 1 1 1 1 1 1 8 8 32 32 16 16 2 2 8 18 18 18 36 3 96 96 96 6 3 6 14 28 28 28 28
Note: Major fabricated items may be ordered as a kit, part number 03-199-620-3104.
38 XS146C-256 (4/01)
03172AAM.p65
To order parts give part name, number & machine serial number.
Parts Manual
A Terex Company
Huckbolt Locations - Flat Screens Reference No 3172AAM
Item No.
Part Number
Description
Quantity
A
7511-124-08
Huckbolt, 3/4" x 1/2"
54
B
7511-124-12
Huckbolt, 3/4" x 3/4"
68
C
7511-124-16
Huckbolt, 3/4" x 1"
48
D
7511-124-24
Huckbolt, 3/4" x 1-1/2"
26
E
7511-124-28
* Huckbolt, 3/4" x 1-3/4" (Gear Case Only)
F
7510-224
Huckbolt Collar (Not Identified on Illustration)
196
* Note: For specific Huckbolting arrangement on Gear Cases, See Vibrating Basket Assembly.
39 XS146C-208 (5/00)
03172AAM.p65
To order parts give part name, number & machine serial number.
40
View more...
Comments