Telsmith 52S Catalogo de Partes Gyrasphere

Gyrasphere Parts Catalog Model 52

ISSUE DATE: 11/00

SAFETY Read and fully understand the safety information on the inside front cover of this manual before operating or servicing the crusher. crusher. Always lock out power and tag controls controls before performing any lubrication, maintenance, adjustments or repairs!

!

WARNING DANGER !!!

Failure to follow the safety precautions shown below may result in serious personal injury or death!  Never attempt to work work on quarry equipment equipment while it is is in operation. Always stop stop the machinery, machinery, lockout power and tag controls. . . 1. Before performing performing any lubrication, lubrication, maintenance, adjustment or repairs. repairs. 2. Before Before removi removing ng spille spilled d materi materials. als. 3. Before Before clearing clearing jams or working working inside inside the machinery machinery.. 4. If any unusual unusual noises noises or sudden sudden changes changes in operati operation on are noticed. noticed. • Stay clear of feed and discharge discharge areas and other places places where falling falling rock is present. Keep away away from loading vehicles. Wear and use personal protective equipment in accordance with all applicable health and safety regulations. Safety goggles, hard hat, ear plugs and steel toe shoes are mandatory when working near machinery. Wear and use additional personal protective equipment as required. • Stay clear of springs and other pinch points. points. Never Never reach reach in-between in-between vibrating equipment and its support structure. Keep a safe distance from all moving components. • Never attempt to enter enter the crushing crushing chamber when tramp iron or other uncrushable objects objects are wedged inside. These materials are under tremendous pressure and may be propelled upwards through the feed opening at any time. On crushers not equipped with hydraulic clearing, use a pole, hook, grappling device or breaker bar to safely dislodge uncrushable objects. • Do not make make equipment modifications modifications that will will result in in a safety hazard or create create a dangerous dangerous situation. Never remove or disable safety devices. Maintain all machinery in accordance with manufacturer’s manufacturer’s instructions and maintenance schedules. • Read the operator’ operator’ss manual for the equipment that you operate. operate. Be sure that you fully understand all phases of operation for each machine. A careful and well-trained operator is the best insurance against an accident. • Refer to to th the Telsmith Quarry Equipment Safety Guide  for important quarry safety information. If your copy of the Safety Guide is missing, replacement copies may be obtained from your local Telsmith dealer or the Telsmith Parts Department. • All rotating rotating power products are potentially dangerous dangerous and must must be properly properly guarded. Placement of guards and other safety equipment is the user’s user’s responsibility. responsibility. Such equipment must be installed wherever appropriate and maintained are required. • It is the purchaser’s purchaser’s responsibility responsibility to ensure that quarry equipment is installed and used in a safe and lawful lawful manner. All machinery must be operated in compliance with applicable health and safety laws and general standards of reasonable care.

ii

11/00

Parts Catalog

Telsmith Gyrasphere Model 52

TABLE OF CONTENTS Figure

Title

---

Ordering Repair Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Figure 1

Main Frame Assembly Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Figure 2

Upper Frame Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Figure 3

Eccentric Assembly and Main Drive Gear . . . . . . . . . . . . . . . . . . . . 6

Figure 4

Mantle, Head and Shaft Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . 8

Figure 5

Countershaft Countershaft Box Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 10

Figure 6

V-Belt Drive and Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 12

Figure 7

Hydraulic Hydraulic Relief Cylinders Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Figure 8

Hydraulic Hydraulic Locking Cylinders Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 16

Figure 9

Power Rotator Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Figure 10

Anti-Spin Assembly and Bottom Plate . . . . . . . . . . . . . . . . . . . . . . 20 20

Figure 11

Anti-Spin Valve Block and Hydraulic Lines . . . . . . . . . . . . . . . . . . 22

Figure 12

Hydraulic Hydraulic Power Unit - Major Components Components . . . . . . . . . . . . . . . . . . 24 24

Figure 13

Hydraulic Power Unit - Control Console. Console . . . . . . . . . . . . . . . . . . . . . 26

Figu Figure re 13 13A A

Hydr Hydrau aulilic c Pow Power er Un Unit it - C Con ontr trol ol Co Cons nsol ole e (Di (Digi gita tall D Dis ispl play ay Opti Option on)) . . 28

Figure 14

Hydraulic Power Unit - Hose Connections Connections . . . . . . . . . . . . . . . . . . . 30 30

Figure 15

Hydraulic Hydraulic Power Unit - Oil Filters . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Figure 16

Hydraulic Power Unit - Reservoir Components . . . . . . . . . . . . . . . 36

Figure 17

Hydraulic Hydraulic Power Unit - Solenoid Coils . . . . . . . . . . . . . . . . . . . . . . 38

Figure 18

Oil Lubrication Lubrication Module - Major Components Components . . . . . . . . . . . . . . . . . 40

Figure 19

Oil Lubrication Module - Gauge Assembly . . . . . . . . . . . . . . . . . . . 44

Figure 20

Oil Lubrication Lubrication Module - Oil Pump . . . . . . . . . . . . . . . . . . . . . . . . . 46

Figure 21

Oil Lubrication Lubrication Module - Oil Filter. . . . . . . . . . . . . . . . . . . . . . . . . . 46

Figure 22

Oil Lubrication Lubrication Module - Oil Cooler (Water-to-oil) (Water-to-oil) . . . . . . . . . . . . . 48

Figure 23

Oil Lubrication Module - Air-Oil Cooler and Water-to-Oil Cooler . . 50

Figure 24

Oil Feed Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Figure 25

Oil Return Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Figure 26

Alarm Panel Assembly. Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Figure 27

Nameplates, Nameplates, Labels, and Decals . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Figure 28

Service Tools Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

11/00

Page

iii

Telsmith Gyrasphere Model 52

Parts Catalog

NOTES 

iv

11/00

ORDERING REPAIR PARTS How to Order Repair Parts 1. Find Find the model model and and serial serial number number of of the crush crusher er.. This information is located on a data plate attached to the crusher main frame. Tag controls and lock out power before attempting to read data plate! 2. Det Determ ermine ine which which parts parts are are needed needed.. Use the the parts parts lists and exploded diagrams contained in this booklet to help identify replaceable components and subassemblies. 3. Order parts parts from your local Telsmit Telsmith h dealer dealer or the Telsmith Parts D epartment. To ensure that you  receive the correct parts, don’t forget to include your  crusher’s model and serial numbers when ordering! 

Contacting Telsmith • Use the following following phone phone numbers numbers to contact the the Telsmith Parts Department: 800-688-6601 (U.S.A. and Canada) 262-242-6600 (Outside U.S.A. and Canada) FAX: 262-242-7861  Send all written correspondence to :

Telsmith Parts Department 10910 N. Industrial Drive, P.O. P.O. Box 539 Mequon, WI 53092-0539 U.S.A. • Send all e-mail inquiries to :

[email protected]

Transportation Damage or Loss Claims All shipments are carefully inspected and delivered to the carrier in good condition. However, always check for any loss or damage that may have occurred during transit. Refuse to accept any shipment with lost or damaged items until the carrier provides a written acknowledgment of the problem. In the event of concealed damage, notify the carrier as soon as possible. By following these suggestions you will have less difficulty in collecting your claim. Note that for most carriers, freight claims must be filed with the destination carrier by the consignee.

Return of Repair Parts Telsmith will not accept return return of any parts unless they are accompanied accompanied by a material return authorization (MRA) form. Before returning any parts, always contact the Telsmith Parts Department to obtain an MRA form. Since returned parts must be thoroughly inspected prior to resale, there may be a return charge which will be quoted when authorization is given.

Additional Information Where to Order Repair Parts Order genuine Telsmith parts from your local Telsmith dealer. If necessary, contact the Telsmith Parts Department for the name and location of the Telsmith dealer nearest you. If there is no Telsmith dealer assigned to your area, parts may be ordered factory-direct from the Telsmith Parts Department.

11/00

The actual parts used on your machine may be different than shown in this catalog, due to fabrication variables, custom engineering, or product improvements. If a repair part has been improved in design and bears a revised part number, the improved part will be supplied in place of the part ordered. Orders for obsolete parts requiring fabrication are not subject to cancellation or return. Supplier items which are specially ordered are also not subject to cancellation or return. 1

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 1 104

102

104

103

103

104 101

102

105 106

107

111 112 113

108 109

110

2

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 MAIN FRAME ASSEMBLY (Refer to Figure 1)

Item No.

Part No.

Description

Qty

101

10P71

STRIP, Bakelite 1 x 1/8 x 47 in.

102

EA-272-2303

SHIELD, Cor-Ten Stl frame arm

2

103

EB-272-2303

SHIELD, Cor-Ten Stl frame arm

2

104

ED-272-2303W

SHIELD, Cor-Ten Stl intermediate gusset

6

105

EC1-272-2303

SHIELD, Cor-Ten Stl countershaft box

1

106

EG-272-2303

SHIELD, Cor-Ten Stl countershaft box

1

107

TH1-272-1503

PIN, Thrust

3

108

60C45

WASHER, 2-1/2 in. spherical

3

109

60C44

LOCKNUT, 2-1/2 in. heavy hex

3

110

AA5-272-2302

FRAME, Main

1

111

CC1-272-2303

LINER SEGMENT, Frame

1

112

CB1-272-2303R

LINER SEGMENT, Frame

1

113

CB1-272-2303L

LINER SEGMENT, Frame

1

12

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

3

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 2 23 3 20 1

20 2

20 9

23 2

20 3

23 1 22 9

20 9

20 4

22 8

23 0

22 3 22 6 226A

SEE FIGURE 8 FOR LOCKING CYLINDERS 20 6 (F C MODELS ONLY)

20 5 22 7

22 6 226A 226B

22 6 226A 226B

204A 20 7 22 5

20 9

21 6 22 3

20 8

22 2 22 4

20 9 21 5 21 4 21 0

22 1 211 21 3 22 0 21 9

21 2

21 8

21 7

4

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 UPPER FRAME ASSEMBLY (Refer to Figure 2) 

Item No. 201 202 203 204

204A 205 206

207 208 209 210 211 212 213 214 215 216 217 218 219 220 221

222 223 224 225 226 226A 226B 227 228 229 230 231 232 233

Part No. KA-272-2373 10E47 CA-272-2373 EA-272-2329 DA-272-2329 CA1-272-2329 AA1-272-2329 BA-272-2329 A1-272-2329 12D91 12D91 A1-272-2328 AB-272-2328 AB-272-2328 AB-272-2328 10E47 62C84 26F83 KH-272-2603 23C60 10E47 31A41 FA-272-2303W 23J64 GA-272-2373 TA-272-2373 EA-272-2373 26B48 12Z79 NA-272-2373W NA-272-2373W NA-272-2373W MA-272-2373W MA-272-2373W MA-272-2373W 26F21 27L87 27C98 BF-272-2373 FA-272-2673 62C88 62F13 62C79 26M22 HA-272-2373 KG-272-2603 10D41 10E47 12T10

Description HOPPER, Receiving STRIP, Felt, 5/8 x 18.6 ft. LOCKNUT CONCAVE RING (52FC - Coarse) CONCAVE RING (52FC - Medium) CONCAVE RING (52FC - Fine) CONCAVE RING (52S - Extra Coarse) CONCAVE RING (52S - Coarse) CONCAVE RING (52S - Medium) SMITHBOND, 22 lb. Kit (52FC) SMITHBOND, 22 lb. Kit (52S) TAPER SEGMENT RING, Filler (52FC - Coarse) RING, Filler (52FC - Medium) RING, Filler (52FC - Fine) STRIP, Felt, 5/8 x 16.4 ft. CAPSCREW, Socket hd., 5/8 - 11 x 8 in. WASHER, Hardened, 5/8 in. RETAINER, Pin FITTING, Grease, 1/8 in. STRIP, Felt, 5/8 x 15.3 ft. RING, Retaining, 3.7 in. ID BUSHING, Thrust pin CAP, Pipe, 4 in. UPPER FRAME SUPPORT BOWL DRIVE KEY WASHER, Hardened, 3/4 in. CAPSCREW, Socket hd., 3/4 - 10 x 2-1/4 in. HOPPER, Inner Receiving (52FC - Coarse) HOPPER, Inner Receiving (52FC - Medium) HOPPER, Inner Receiving (52FC - Fine) HOPPER, Inner Receiving (52S - Extra Coarse) HOPPER, Inner Receiving (52S - Coarse) HOPPER, Inner Receiving (52S - Medium) CAPSCREW, Hex hd., 3/4 x 2 in. LOCKWASHER, 3/4 in. NUT, Hex, 5/8 in. RING, Drive BEARING STRIP KIT, Adhesive SPATULA, Serrated CAM FOLLOWER NUT, Hex, 3/4 - 16 GEAR, 160 tooth KE EPE R CAPSCREW, Hex hd., 5/8 x 2-1/2 in. STRIP, Felt, 5/8 x 14.4 ft. CAPSCREW, Hex hd., 5/8 x 2-3/4 in.

Qty 1 1 1 1 1 1 1 1 1 7 6 5 4 4 4 1 16 46 4 4 1 3 3 3 1 1 3 12 12 1 1 1 1 1 1 8 12 12 1 4 1 1 4 4 1 2 6 1 12

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

5

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 3

30 1

32 1

30 2

30 3

31 7

30 4

32 0

30 5

31 6

31 9 31 8

30 6

31 5

30 9

30 8

30 4

30 7

31 0

31 1

31 4

31 2 31 3

6

11/00

Parts Catalog

Telsmith Gyrasphere Model 52

ECCENTRIC ASSEMBLY ASSEMBLY and MAIN DRIVE GEAR (Refer to Figure 3)  Item No.

Part No.

Description

301

A-272-332

KEY

1

302

DV-17-26

PIN, 1/2 x 1-1/2 in.

1

303

AB-272-2339

ECCENTRIC

1

304

10E18

BEARING, Thrust

2

305

CA-272-2338

SNAP RING, Outer

1

306

AA-272-2338

SLEEVE, Outer

1

307

T-272-337

SHIM, “A” side, 1/64 in.

2

V-272-337

SHIM, “A” side, 1/32 in.

2

U-272-337

SHIM, “B” side, 1/64 in.

2

W-272-337

SHIM, “B” side, 1/32 in.

2

309

F-272-332

KE Y

2

310

A3-272-2344

GEAR, Main drive

1

311

27L78

LOCKWASHER, 3/8 in.

2

312

12K06

CAPSCREW, Hex hd., 3/8 - 16 x 2 in.

2

313

10E23

CAPSCREW, Socket hd., 1 x 3-1/4 in.

10

314

27M05

LOCKWASHER, 1 in.

10

315

HA-272-2338

SLEEVE, Inner

1

316

CC-272-1538

PISTON RING, Outer

1

317

GA1-272-2338A

RING, Rotary seal

1

318

10E16

CAPSCREW, Socket hd., 3/4 x 1-3/4 in.

9

319

27L87

LOCKWASHER, 3/4 in.

9

320

JA-272-2338

WASHER, Hardened 3/4 in.

9

321

10P71

STRIP, Bakelite, 1 x 1/8 x 47 in.

9

NS

12E52

BABBIT, 5 lbs. (2.3 kg.) (Outer Sleeve)

1

NS

12E52

BABBIT, 5 lbs. (2.3 kg.) (Inner Sleeve)

1

308

Qty

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

7

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 4

52FC Only

52S Only 40 1

40 6

40 7

41 3 41 4

40 2

40 8 40 3

40 9 41 0

40 4 40 5 41 5 411

41 2

41 6

8

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 MANTLE, HEAD and SHAFT ASSEMBLY (Refer to Figure 4) 

Item No.

Part No.

Description

Qty (52S)

Qty (52FC)

4 01

16V76

CAPSCREW, Hex hd., 7/8 x 4 in. (GR 5)

6

-

4 02

WB1-272-1533

CAP, Shaft nut

1

-

4 03

VB-272-1533

NUT, Shaft

1

-

4 04

26B47

WASHER, Hardened, 7/8 in.

6

-

4 05

27D03

NUT, Hex, 7/8 - 9 in.

6

-

4 06

16V76

CAPSCREW, Hex hd., 7/8 x 4 in. (GR 5)

-

6

4 07

YB-272-1533

PLATE, Feed

-

1

4 08

XB-272-1533

NUT, Shaft

-

1

4 09

26B47

WASHER, Hardened, 7/8 in.

-

6

4 10

27D03

NUT, Hex, 7/8 - 9 in.

-

6

411

CB-272-1533

RING, Burning

1

1

4 12

A-272-2332

MANTLE

1

1

4 13

12D91

SMITHBOND, 22 lb. kit

4

4

4 14

AA2-272-2333

TAPER HEAD

1

1

4 15

E-272-333

PISTON RING, Inner

1

1

4 16

AA3-272-2334

SHAFT, Main

1

1

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

9

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 5 50 1

50 2 51 3

50 4 50 5

50 8

50 9

513A THRU 513C

51 0 51 1

51 4 51 2

50 3

52 4 50 7

51 5 513A

52 1

513B 513C

52 0

51 9 51 8

52 3

51 7

51 6

52 2

50 6

51 6 51 7

10

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 COUNTERSHAFT BOX ASSEMBLY (Refer to Figure 5) 

Item No.

Part No.

Description

Qty

5 01

B-272-338

KEY, Angle

1

5 02

A-272-338

LOCKWASHER

1

5 03

AA-272-1077

NUT, Adjusting

1

5 04

10S13

CAPSCREW, Socket hd., 5/8 x 3 in.

1

5 05

27L84

LOCKWASHER, 5/8 in.

1

5 06

BA-272-2343

COUNTERSHAFT

1

5 07

26E60

CAPSCREW, Socket hd., 1/2 x 1-3/4 in.

1

5 08

13C75

SEAL, Oil, 4-3/8 in.

1

5 09

J-272-339

GASKET, Oil Guard

1

5 10

C-272-316

OIL GUARD

1

511

26F83

WASHER, Hardened, 5/8 in.

4

5 12

26C48

CAPSCREW, Hex hd., 5/8 x 1-1/2 in.

4

5 13

60A26

BUSHING ASSEMBLY (Includes items 513A thru 513C)

1

513A

NSS

BUSHING, 4-3/8 in.

1

513B

NSS

LOCKWASHER

4

5 13C

NSS

CAPSCREW

4

5 14

62F19

SHEAVE, 35.5 in. OD “6-8V” groove

1

5 15

FX-273-616

KEY, 1 x 1 x 8-3/4 in. lg., w/t.hole

1

5 16

10E19

BEARING, Roller

2

5 17

10E20

CUP, Bearing

2

5 18

10Z95

CAPSCREW, Hex hd., 1-1/4 x 3-1/2 in. (GR 5)

8

5 19

10W72

WASHER, Hardened, 1-1/4 in.

8

5 20

AA-272-2343

BOX, Countershaft

1

5 21

CA-272-2343 CB-272-2343 CC-272-2343 CD-272-2343

SHIM, .008 in. (includes top and bottom halves) SHIM, .015 in. (includes top and bottom halves) SHIM, .035 in. (includes top and bottom halves) SHIM, .062 in. (includes top and bottom halves)

5 22

C-18-1136

GEAR, Bevel Pinion

1

5 23

B-17-535

TAPER KEY, 1 x 1 x 7 in.

1

5 24

27L81

LOCKWASHER, 1/2 in.

1

A/R A/R A/R A/R

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

11

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 6 60 8 60 7

60 9

60 6 60 5

60 4 60 3

60 2 60 1

61 0

611A 611B

611C

61 8 61 2

611D

61 3

61 4

 

61 1

611A THRU 611D

61 5 61 6

61 7

12

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 V-BELT DRIVE AND GUARD (Refer to Figure 6) 

Item No.

Part No.

Description

Qty

601

26E28

CAPSCREW, Hex hd., 1/2 x 1-1/4 in.

14

602

26D04

WASHER, 1/2 in. hardened

14

603

H-272-2352

BACK PLATE, Guard

604

27D01

NUT, Hex, 3/4 in.

5

605

26B48

WASHER, Hardened, 3/4 in.

5

606

K-272-2352

BRACKET, Drive guard

1

607

15S88

CAPSCREW, Hex hd., 3/4 - 10 x 1-3/4 in.

5

608

J-272-2352

BRACKET, Drive guard

1

609

A-272-2352W

DRIVE GUARD

1

610

G-272-2352

BACK PLATE, Guard

1

611

---

BUSHING ASSEMBLY, 1200 RPM, 250HP (Includes items 611A thru 611D)

1

---

BUSHING ASSEMBLY, 1200 RPM, 300HP (Includes items 611A thru 611D)

1

---

BUSHING ASSEMBLY, 1800 RPM, 250HP (Includes items 611A thru 611D)

1

---

BUSHING ASSEMBLY, 1800 RPM, 300HP (Includes items 611A thru 611D)

1

NSS

CAPSCREW, Hex hd.

4 4

611A

1

611B

NSS

LOCKWASHER, Split

611C

NSS

BUSHING, Tapered, Sheave Bore

1

611D

NSS

SETSCREW

1

612

---

KEY

1

613

15J02

SHEAVE, Motor, 18 OD 6/8V (used w/1200 RPM motor)

1

62J11

SHEAVE, Motor, 12.5 OD 6/8V (used w/1800 RPM motor)

1

62B71

MOTOR, Drive, 300 HP, 1200 RPM

1

614

62B72

MOTOR, Drive, 250 HP, 1200 RPM

1

---

MOTOR, Drive, 300 HP, 1800 RPM

1

---

MOTOR, Drive, 250 HP, 1800 RPM

1

615

---

NUT

4

616

---

WASHER

4

617

60G18

SLIDE RAILS, Motor (set of 2) (used w/1200 RPM motors)

1

60G17

SLIDE RAILS, Motor (set of 2) (used w/300HP, 1800 RPM motor)

1

60G19

SLIDE RAILS, Motor (set of 2) (used w/250HP, 1800 RPM motor)

1

30B23

V-BELTS, 6/8V 2240, M/S 6 (matched set)

1

618

 Please identify parts by figure and item number if part number is not shown. Your Telsmith dealer will verify the correct part number for each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWA ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’s serial number when ordering. The actual parts us ed on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements.

13

11/00

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 7

Figure 7A 701 701

703

713 722 714

703

715

715 716

716 717

704 705

702

712

721

712

704 705

706 705

712

712

704 704

705

706

707

712

713 714

715

716

715 716

718

720 717

712

722

721

707

715 723

715

719

716 717

712

716 702

712

708

709

708

715

712

719

715 718

716 716

709 TO HYDRAULIC POWER UNIT (SEE FIGURE 14)

720 717

710 711

710 711

707

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 7

Figure 7A 701 701

703

713 722 714

703

715

715 716

716 717

704 705

712

721

712

704

702

705

706

712

712

704

705

704

705

706

707

712

713 714

716

718

720 717

712

707

715

716

715

722

721

707

715 723

715

719

716 717

712

716 702

712

708

709

708

715

712

719

715 718

709

716 716

TO HYDRAULIC POWER UNIT (SEE FIGURE 14)

720 717

710 711

710 711

14

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 HYDRAULIC RELIEF CYLINDERS (Refer to Figures 7 and 7A) 

Item No.

Part No.

Description

Qty

701

L-17-575

CAPSCREW, Hex hd., 1-7/8 x 7-1/2 in.

702

12K44

CAPSCREW Hex hd., 3/8 - 16 x 3 in (GR8)

703

14Z56

WASHER, Cut, 1-7/8 in.

704

27L09

SETSCREW, Socket hd., 3/8 x 3/8 in.

18

705

C-272-395

PLUG, Brass

18

706

28S40

COUPLING, Cylinder

9

707

60E07

CYLINDER, Hydraulic relief

9

708

28X13

CAPSCREW, Hex hd., 1 x 3-3/4 in. (GR 8)

709

28S41

BRACKET, Swivel pivot mounting

710

10S89

WASHER, Hardened, 1 in.

36

711

26A17

LOCKNUT, 1 in.

36

712

28S52

O-RING, 1.296 ID x 0.139 in. wide

56

713

60K03

PLUG, w/o-ring, -12

9

714

DB-272-1308

MANIFOLD

9

715

28S51

FLANGE, Split half, 1 in.

72

716

27L78

LOCKWASHER, 3/8 in.

128

717

28X14

CAPSCREW, Hex hd., 3/8 - 16 x 2-3/4 in. (GR 8)

718

60E10

VALVE Relief

9 16 9

36 9

72 9

Parts Catalog

Telsmith Gyrasphere Model 52 HYDRAULIC RELIEF CYLINDERS (Refer to Figures 7 and 7A) 

Item No.

Part No.

Description

Qty

701

L-17-575

CAPSCREW, Hex hd., 1-7/8 x 7-1/2 in.

702

12K44

CAPSCREW Hex hd., 3/8 - 16 x 3 in (GR8)

703

14Z56

WASHER, Cut, 1-7/8 in.

704

27L09

SETSCREW, Socket hd., 3/8 x 3/8 in.

18

705

C-272-395

PLUG, Brass

18

706

28S40

COUPLING, Cylinder

9

707

60E07

CYLINDER, Hydraulic relief

9

708

28X13

CAPSCREW, Hex hd., 1 x 3-3/4 in. (GR 8)

709

28S41

BRACKET, Swivel pivot mounting

710

10S89

WASHER, Hardened, 1 in.

36

711

26A17

LOCKNUT, 1 in.

36

712

28S52

O-RING, 1.296 ID x 0.139 in. wide

56

713

60K03

PLUG, w/o-ring, -12

9

714

DB-272-1308

MANIFOLD

9

715

28S51

FLANGE, Split half, 1 in.

72

716

27L78

LOCKWASHER, 3/8 in.

128

717

28X14

CAPSCREW, Hex hd., 3/8 - 16 x 2-3/4 in. (GR 8)

718

60E10

VALVE, Relief

719

GG-273-618W

HOSE ASSEMBLY, 1 x 15.5 in.

16

720

12K10

CAPSCREW, Hex Hd 3/8 - 16 x 1-1/4 in. (GR 8)

64

721

GH-273-618W

HOSE ASSEMBLY, 1 x 13.5 in.

2

722

DC-272-1308

TEE, 1-5/16 in. - 12

2

723

28S53

ELBOW, Adapter

2

NS

60E07C1

SEAL KIT, Cylinder (For item 707)

1

9 16 9

36 9

72 9

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

15

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 8

80 1 80 2

80 7

80 6

80 3

80 4

80 5 80 3

80 6

80 7

80 9

80 5 80 6

81 0

80 5

80 6

80 9 80 5 80 5 80 3 80 4

80 6 80 3 80 7

80 5

80 6 80 3

80 6 80 3

80 5

80 8

80 4

80 5

16

80 9

80 6

TO HYDRAULIC POWER UNIT (SEE FIGURE 14)

80 7 80 5

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 HYDRAULIC LOCKING CYLINDERS (Refer to Figure 8) 

Item No.

Part No.

Description

Qty

80 1

11P62

CAPSCREW, Socket hd., 3/4 x 3-1/2 in.

9

80 2

26B48

WASHER, Hardened, 3/4 in.

9

80 3

23R05

CONNECTOR, 6-6

6

80 4

H0620-06062222-016

HOSE ASSEMBLY

3

80 5

62C62

CYLINDER, Hydraulic locking

9

80 6

15J71

ELBOW, Male 6-6, 45 degree

8

80 7

H0620-06062222-021

HOSE ASSEMBLY

4

80 8

14T39

PLUG, 9/16 in.

1

80 9

23P61

ELBOW, 6-6

3

81 0

H0620-06062222-024

HOSE ASSEMBLY

1

NS

62C62C1

SEAL KIT, Cylinder (for item 805)

1

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

17

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 9

901

902 903 904

905

919 921 926

906 907

925 908

908

912

909

924

910 923

913 911

914 915

922 916 917

921 907

918 REFER TO FIGURE 14 FOR HOSE CONNECTIONS

18

920

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 POWER ROTATOR ROTATOR ASSEMBLY (Refer to Figure 9)

Item No.

Part No.

Description

Qty

901

KA-272-2673W

COVER, Gearbox

1

902

12K63

WASHER, Hardened, 3/8 in.

4

903

20N58

CAPSCREW, Hex hd., 3/8 - 16 x 7/8 in.

4

904

62D30

LOCKING ASSEMBLY, Ringfeder

1

905

HA-272-2673

PINION GEAR, 17 tooth

1

906

BK-17-575

CAPSCREW, Hex hd., 1/2 - 13 x 2-1/2 in.

2

907

16P91

NUT, Hex, 1/2 - 13

12

908

26B48

WASHER, Hardened, 3/4 in.

10

909

23A45

CAP, 1/4 in. tube

1

910

62E05

ELBOW, Male, 4-2

1

911

15S88

CAPSCREW, Hex hd., 3/4 - 10 x 1-3/4 in.

4

912

26P65

AIR BREATHER

1

913

62E07

COUPLING, 4-6

1

914

H-17-179

NIPPLE, Pipe, 3/8 x 3 in.

1

915

23L92

ELBOW, 3/8 in. 90 degree pipe

1

916

N-17-179

NIPPLE, 3/8 x 4 in. pipe

1

917

62E06

ADAPTER, Male, 6-6

1

918

62C63

MOTOR, Hydraulic

1

919

12D40

CAPSCREW, Hex hd., 1/2 x 3 in.

920

26D36

CAPSCREW, Socket hd. 1/2 x 1-1/2 in.

921

26D04

WASHER, Hardened 1/2 in.

922

62D27

GEARBOX, Planetary

1

923

---

KEY (included with item 922)

1

924

26E73

CAPSCREW, Hex hd., 3/4 - 10 x 2-1/2 in.

6

925

CA-272-2673

BRACKET, Gearbox

1

926

JA-272-2673

PLATE, Adapter

1

10 2 20

Note: The crusher contains two power rotator assemblies. Quantities shown are for each assem bly.

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

19

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 10

1001

1002

1003 1018

1004

1023

1005

1024 CRUSHERS W ITHOUT ANTI-SPIN ANTI-SPIN ONLY 1006 TO OIL FEED LINE (SEE FIGURE 24)

1019 1007 1007

1008

1017

1022 1016 1009 1020 1015 1014

1010 1021

1011 1013

1012

20

11/00

Parts Catalog

Telsmith Gyrasphere Model 52

ANTI-SPIN ASSEMBLY AND BOTTOM PLATE (Refer to Figure 10)  Item No.

Part No.

Description

Qty

1001

A-272-2377

DRIVE TANG

1

1002

26B93

CAPSCREW, Socket hd., 1/2 - 13 x 4 in.

6

1003

EA-272-2677

SLIDER PLATE

1

1004

FA-272-2677

ADAPTER PLATE

1

1005

62D26

GEARBOX

1

1006

KA-272-2338

PLATE, Bottom, anti-spin

1

1007

26B48

WASHER, Hardened, 3/4 in.

21

1008

16V75

CAPSCREW, Hex hd., 3/4 x 1-1/2 in.

12

1009

61T18

O-RING

1

1010

62A01

MOTOR, Hydraulic, anti-spin

1

1011

GA-272-2677W

COVER

1

1012

23V93

CAPSCREW, Hex hd., 1/2 - 13 x 3/4 in.

6

1013

27L58

WASHER, Flat, 1/2 in.

6

1014

62D43

CAPSCREW, Socket hd., M12 - 1.75 x 30MM

2

1015

27L81

LOCKWASHER, 1/2 in.

2

1016

62D42

CAPSCREW, Socket hd., M16 - 2 x 55MM

8

1017

26K68

CAPSCREW, Hex hd., 3/4 x 1 in.

3

1018

62D41

CAPSCREW, Socket hd., M18 - 1.5 x 55MM

6

1019

62D83

REDUCER, Metric

1

1020

23W38

ELBOW, Male, 6-2

1

1021

62D39

HYDRAULIC TUBE ASSEMBLY, 3/8 in. (gearbox lubrication)

1

1022

10D98

ELBOW, 6-6

1

1023

BA2-272-2338W

PLATE, Bottom (replaces item 1006 - crushers w/out anti-spin only)

1

1024

23D16

PLUG, Sq. hd., 3/4 in.

1

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

21

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 11 1101

1127

1102 SEE FIGURE 7

1103

1105C

1105D 1105 1105B

1105A 1105B 1105C 1105D

1107

1104

1105A 1106

1108 1109

TO HYDRAULIC POWER UNIT (SEE FIGURE 14)

SEE FIGURE 10

1117 1125

1110

1123 1122

1116

1121

1112 1113

1120

1115

1113

M2 1123

1124

1113

1126

1114 1122 1121

1120

M1

1119

1113 1112 1111

1118 CASE DRAIN

22

11/00

Parts Catalog

Telsmith Gyrasphere Model 52

ANTI-SPIN VALVE BLOCK AND HYDRAULIC LINES (Refer to Figure 11)  Item No.

Part No.

Description

Qty

1101

60S25

ELBOW, Swl. nut, 90 degree, M x F, 1/2 in.

1

1102

H0820-08082225-027

HOSE ASSEMBLY (anti-spin supply)

1

1103

23P99

ELBOW, 8-8

1

1104

23N48

ELBOW, 10-10

1 1

1105

62B80

VALVE AND BLOCK ASSEMBLY (Includes items 1105A thru 1105D)

1105A

62F54

VALVE, Check

1

1105B

62B79

VALVE, Kick down relief

1

1105C

62A04

VALVE, Reducing

1

1105D

---

VALVE BLOCK

1

1106

60Z59

COUPLING, Pressure test

1

1107

23H53

CONNECTOR, 10-10

1

1108

27L56

WASHER, Cut, 3/8 in.

3

1109

13J47

CAPSCREW, Hex Hd., 3/8 x 2-1/2 in.

3

1110

H1022-10102222-080

HOSE ASSEMBLY (oil return, “M2”)

1

1111

23Y18

CAPSCREW, Hex hd., 5/16 x 2 in. (5/8 in. hose)

2

1112

62D51

PLATE, Cover (5/8 in. hose)

2

1113

62D50

CLAMP SET (5/8 in. hose)

2

1114

H1022-10102222-079

HOSE ASSEMBLY (oil supply, “M1”)

1

1115

H0410-06062222-081

HOSE ASSEMBLY (case drain)

1

1116

62D33

TEE, 6-6

1

1117

62H69

REDUCER, 8-6

1

1118

62D38

HYDRAULIC TUBE ASSEMBLY

1

1119

23P61

ELBOW, 6-6

1

1120

62D40

HYDRAULIC TUBE ASSEMBLY

2

1121

62D34

REDUCER, 12-10

2

1122

15X33

ELBOW, 16-12

2

1123

12W73

ELBOW, 10-10

2

1124

10D98

ELBOW, 6-6

1

1125

20X06

CAPSCREW, Hex hd., 5/16 -18 x 1-1/2 in. (5/8 in. hose)

1

1126

62D49

PLATE, Weld (5/8 in. hose)

1

1127

23H54

CONNECTOR, 8-8

1

• Please identify parts by figure and item number if part number is not shown. Your Telsmith dealer will verify the correct part number for each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements.

23

11/00

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 12 VIEW A

VIEW B

1207A 1207A

1207A THRU 1207C

1209

1209A AND 1209B

1207C✱

1207C✱

1203

1207

1207B

VIEW C 1227

1226

1208 1207B 1204 1209A

1221

1209B✱ 1222 1214

1205 1219

1229

1213 1220

1238 1228

1212

1202 1206

1217 1218

1219

1220

1210

1216

1224 1223

1225 1225A 1215

1225B✱

1201 See View E See View B See View A

CONTROL CONSOLE See Figure 13

VIEW D

1230

See View D

VIEW E 1233 1237 1234 1232 1232A 1232B✱ OIL FILTERS See Figure 15

See View C

1231 1211 1239 1235

1236

RESERVOIR COMPONENTS See Figure 16

✱Refer

to Figure 17 For solenoid coils

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 12 VIEW A

VIEW B

1207A

1207A THRU 1207C

1209

1209A AND 1209B

1207C✱

1207A 1207C✱

1203

1207

1207B

VIEW C 1227

1226

1208 1207B 1204 1209A

1221

1209B✱ 1222 1214

1205 1219

1229

1213 1220

1238 1228

1212

1202 1206

1217 1218

1219

1220

1210

1216

1224 1223

1225 1225A 1215

1225B✱

1201 See View E See View B See View A

CONTROL CONSOLE See Figure 13

VIEW D

1230

See View D

VIEW E 1233 1237 1234 1232 1232A 1232B✱ OIL FILTERS See Figure 15

See View C

1231 1211 1239 1235

RESERVOIR COMPONENTS See Figure 16

1236

✱Refer

to Figure 17 For solenoid coils

24

11/00

Parts Catalog

Telsmith Gyrasphere Model 52

HYDRAULIC POWER UNIT - MAJOR COMPONENTS (Refer to Figure 12)  Item No.

Part No.

Description

1201 1202 1203 1204 1205 1206 1207 1207A 1207B 1207C 1208 1209 1209A 1209B 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219

62F38 62H56 62F43 62F43C1 60Z59 62F47 62H58 ----60Y14 62H61 60Y27 --60Y14 62H60 62H19 62F45 62F45C1 62H65 62H66 62H67 62H62 62F44C1 62H57

CARTRIDGE, Relief valve PLATE, Manifold tapping CHECK VALVE, w/body (Includes item 1204) CARTRIDGE COUPLING, Test port SWITCH, Pressure CONTROL VALVE, Directional 4-way, 3-position VALVE, Pilot (included with item 1207) VALVE, Main (included with item 1207) COIL, Solenoid (Included with item 1207 - see Figure 17) SHUTTLE VALVE, w/body CONTROL VALVE, Directional 4-way, 2-position VALVE, Control (Included with item 1209) COIL, Solenoid (Included with item 1209 - see Figure 17) PLATE, Tapping RESERVOIR, Hydraulic 60 gallon VALVE, Reducing and relieving, w/body (Includes item 1213) CARTRIDGE PLATE, Tapping ADAPTER, Valve COUPLING, Test port VALVE, Dual counterbalance w/body (Includes item 1218) CARTRIDGE CONTROL VALVE, Flow, w/body (Includes item 1220)

Qty 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2

Parts Catalog

Telsmith Gyrasphere Model 52

HYDRAULIC POWER UNIT - MAJOR COMPONENTS (Refer to Figure 12)  Item No.

Part No.

Description

1201 1202 1203 1204 1205 1206 1207 1207A 1207B 1207C 1208 1209 1209A 1209B 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1225A 1225B 1226 1227 1228 1229

62F38 62H56 62F43 62F43C1 60Z59 62F47 62H58 ----60Y14 62H61 60Y27 --60Y14 62H60 62H19 62F45 62F45C1 62H65 62H66 62H67 62H62 62F44C1 62H57 62H57C1 62H64 62H64C1 62K74 62G43 62F34 62F34C1 62F34C2 62H63 62H53 --62H52 --62H55 62H55C1 62H59 62H59C1 62F34C2 62F49 60Y30 A-46-2103 A-46-1928 62K76 --62H38 62H54

CARTRIDGE, Relief valve PLATE, Manifold tapping CHECK VALVE, w/body (Includes item 1204) CARTRIDGE COUPLING, Test port SWITCH, Pressure CONTROL VALVE, Directional 4-way, 3-position VALVE, Pilot (included with item 1207) VALVE, Main (included with item 1207) COIL, Solenoid (Included with item 1207 - see Figure 17) SHUTTLE VALVE, w/body CONTROL VALVE, Directional 4-way, 2-position VALVE, Control (Included with item 1209) COIL, Solenoid (Included with item 1209 - see Figure 17) PLATE, Tapping RESERVOIR, Hydraulic 60 gallon VALVE, Reducing and relieving, w/body (Includes item 1213) CARTRIDGE PLATE, Tapping ADAPTER, Valve COUPLING, Test port VALVE, Dual counterbalance w/body (Includes item 1218) CARTRIDGE CONTROL VALVE, Flow, w/body (Includes item 1220) CARTRIDGE VALVE, Pressure reducing (Includes item 1222) CARTRIDGE VALVE, Remote compensation PUMP, Oil circulating CONTROL VALVE, Directional, 2-way, 2-position, w/body CARTRIDGE AND SOLENOID COIL ONLY (no body) SOLENOID COIL ONLY (See Figure 17) VALVE, Air-bleed and start-up PUMP, Hydraulic COUPLING, Pump MOTOR, TEFC, 20 hp, 1800 RPM (480V - 60 Hz) MOTOR, TEFC, 20 hp, 1800 RPM (380V - 50 Hz) COOLER, Air/oil (Includes item 1231) AIR FILTER CONTROL VALVE, Directional, 2-way, 2-position, w/body CARTRIDGE AND SOLENOID COIL ONLY (no body) SOLENOID COIL ONLY (See Figure 17) GAUGE, Pressure (0-5000 psi) SNUBBER, Gauge DECAL, Warning, hydraulic lines DECAL, Warning, Avoid Personal Injury VALVE, Check VALVE, Pressure compensation HYDRAULIC POWER UNIT, (complete) (380V - 50 Hz) HYDRAULIC POWER UNIT, (complete) (480V - 60 Hz)

1230 1231 1232 1232A 1232B 1233 1234 1235 1236 1237 1238 1239

Qty 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

25

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 13

1309 1310 1312 1313 1314 1323

1308 1311 1314 1323

1306 1311 1314 1323

START

CLOSE

STOP

OPEN

ON

OFF

1301

CLEAR CRUSH

EXTRACT HIGHSP.

1306 1311 1314 1323 1307 1312 1314 1323

1324

1319 1322

1315

1319 1319

1317 1316

1319

1305

1315

2A 2A 2A

1319

2A 3A 4A

1315 1318 1320 1321

6A

1304

7A 8A 8A 9A 10A 13A 14A

1326

1302

1303 1325

26

1319

11/00

Parts Catalog

Telsmith Gyrasphere Model 52

HYDRAULIC POWER UNIT - CONTROL CONSOLE (Refer to Figure 13)  Item No.

Part No.

Description

Qty

1301

---

DISCONNECT, Handle and shaft

1

1302

---

CONNECTOR, Close coupling

1

1303

---

CONTACTOR, 3 pole

1

1304

---

CIRCUIT BREAKER, OVL protection

1

1305

---

CONTACT BLOCK, Auxiliary, top mount, 1 form C

1

1306

---

PUSH BUTTON, Black, flush, 22mm

2

1307

---

PUSH BUTTON, Red, flush, 22 mm

1

1308

---

PUSH BUTTON, Green, flush, 22 mm

1

1309

---

PLUG, Selector position

2

1310

---

SWITCH, Selector, 3 position, main, black, 22mm

1

1311

---

CONTACT BLOCK, 1 N.O.

3

1312

---

CONTACT BLOCK, 1 N.C.

2

1313

---

CONTACT BLOCK, 2 N.O.

2

1314

---

HOLDER, Contact Block

5

1315

---

DIN RAIL, 7.5 mm X 35 mm

1

1316

---

CIRCUIT BREAKER

1

1317

---

CIRCUIT BREAKER

1

1318

---

TERMINAL BLOCK, 10 pole

2

1319

---

ANCHOR, End

6

1320

---

TERMINAL JUMPERS

10

1321

---

LABELS, T-block strip

1

1322

---

TRANSFORMER

1

1323

---

PLATE, Blank legend

5

1324

---

ENCLOSURE, 20 X 16 X 6

1

1325

---

SUB PANEL, 20 X 16

1

1326

---

CONTACT BLOCK, Auxiliary, side mount

1

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

27

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 13A

CLEAR CRUSH

EXTRACT HIGH SP.

MANUAL AUTO

START

CLOSE

STOP

OPEN

13A03 13A04 13A05 13A06 13A07

13A01

13A09 13A10

13A11

2A 2A 2A 2A 3A 4A 6A 7A 8A 8A 9A 10A 13A 14A

5B 5D 6A 7A

28

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 HYDRAULIC POWER UNIT - CONTROL CONSOLE  (DIGITAL DISPLAY DISPLAY OPTION) (Refer to Figure 13A) 

Item No.

Part No.

Description

13A01

---

COUNTER CONTROL

1

13A02✱

---

SYSTEM SENSOR, Zero speed (dual channel)

1

13A03

---

SWITCH, 2 position, main, black, 22 mm

1

13A04

---

CONTACT BLOCK, 2 N.O.

1

13A05

---

CONTACT BLOCK, 1 N.C.

1

13A06

---

HOLDER, Contact Block

1

13A07

---

PLATE, Legend, “Manual - Auto” Auto ”

1

13A08✱

---

MOUNT, Sensor

1

13A09

---

PLUG, Straight, 6 male pins

1

13A10

---

RECEPTACLE, 6 female pins

1

13A11

---

CIRCUIT BREAKER, 1/2 amp

1

✱

Qty

Not shown. Mounted on crusher. crusher.

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

29

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 14 (1 of 2) POWER UNIT TO RELIEF CYLINDERS SEE FIGURE 12 1401 1402

SEE FIGURE 7

1403 1404 1405 1401

1406

1405 1404 1403 1406

1402 1407

1407

POWER UNIT TO LOCKING CYLINDERS

SEE FIGURE 12 1410 1412 1413 1414

1409

1416 1411 SEE FIGURE 8 1415

1408

30

11/00

Parts Catalog

Telsmith Gyrasphere Model 52

HYDRAULIC POWER UNIT - HOSE CONNECTIONS (Refer to Figure 14)  Item No.

Part No.

Description

Qty

1401

62H35

UNION, Straight thread

2

1402

62H31

DUST PLUG, 1 in.

2

1403

62H29

QUICK COUPLING, Female, 1 in.

2

1404

62H30

QUICK COUPLING, Male, 1 in.

2

1405

62H32

DUST CAP, 1 in.

2

1406

23R07

CONNECTOR, 16-16

2

1407

H1621-16162222-300

HOSE ASSEMBLY, #16

2

1408

H0620-06062222-300

HOSE ASSEMBLY, #6

1

1409

60L54

BUSHING, Reducer

1

1410

62A27

O-RING

1

1411

62D11

DUST CAP, 3/8 in.

1

1412

23W72

CONNECTOR, Straight thread, 6-8

1

1413

62D09

QUICK COUPLING, Male, 3/8 in.

1

1414

62D08

QUICK COUPLING, Female, 3/8 in.

1

1415

62D10

DUST PLUG, 3/8 in.

1

1416

23R05

CONNECTOR, 6-6

1

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

31

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 14 (2 of 2) POWER UNIT TO ANTI-SPIN VALVE BLOCK

1417 SEE FIGURE 12

1420 1418

1422

1419

1423 1424

1421

1426

1425

SEE FIGURE 11

1427

POWER UNIT TO POWER ROTATORS

SEE FIGURE 9

SEE FIGURE 12

1435

1439B 1439A

1436 1437

1430

1429

1438 1432

1435

1431

1428

1436

1435 1428

1434

1439B

1433 1429

1435

1438

1439C

1431

1439D

1432 1430

1433 1439

1439A THRU 1439D

1434

32

11/00

Parts Catalog

Telsmith Gyrasphere Model 52

HYDRAULIC POWER UNIT - HOSE CONNECTIONS, continued (Refer to Figure 14)  Item No.

Part No.

Description

Qty

1417

23W89

BUSHING, Reducer

1

1418

23N75

BRANCH TEE, Straight thread

1

1419

26J14

REDUCER, Tube end, 12-6

1

1420

---

O-RING

1

1421

23F34

NUT

1

1422

62D10

DUST PLUG, 3/8 in.

1

1423

62D08

QUICK COUPLING, Female, 3/8 in.

1

1424

62D09

QUICK COUPLING, Male, 3/8 in.

1

1425

62D11

DUST CAP, 3/8 in.

1

1426

23R05

CONNECTOR, 6-6

1

1427

H0620-06062222-300

HOSE ASSEMBLY, #6

1

1428

62H32

DUST CAP, 1 in.

2

1429

62H35

UNION, Straight thread, 16-16

2

1430

62H31

DUST PLUG, 1 in.

2

1431

62H30

QUICK COUPLING, Male, 1 in.

2

1432

62H29

QUICK COUPLING, Female, 1 in.

2

1433

23R07

CONNECTOR, 16-16

2

1434

H1621-12162222-300

HOSE ASSEMBLY, #16

2

1435

23K83

CONNECTOR, 10-12

4

1436

12G46

TEE, 12-12

2

1437

29D54

ELBOW, Swivel, JIC, 12-12

1

1438

H1022-12122222-090

HOSE ASSEMBLY, #10 (to second power rotator)

2

1439

61A52

TUBE CLAMP ASSEMBLY (Includes items 1439A thru 1439D)

2

1439A

---

PLATE, Weld

1

1439B

---

CLAMP SET (one pair)

1

1439C

---

PLATE, Cover

1

1439D

---

CAPSCREW, Hex hd.

1

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

33

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 15 LOW PRESSURE FILTER (Oil Return)

HIGH PRESSURE FILTER (Oil Feed) 1501G

1502A

1503 1501C 1504

1501B

1501E 1501F

1502B 1502C 1501D

1505

1501A 1502D 1502 1501

1501A THRU 1501J

1501H

1502A THRU 1502G

1502E 1501

1502F

1501J

1502G

34

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 HYDRAULIC POWER UNIT - OIL FILTERS (Refer to Figure 15) 

Item No.

Part No.

Description

Qty

1501

62H54

OIL FILTER, High pressure line feed (Includes items 1501A thru 1501J)

1

1501A

62K75

VALVE, Check

1

1501B

---

WASHER

2

1501 C

---

BOLT

2

1501 D

920928

NAMEPLATE

1

1501E

931520

HEAD

1

1501F

928981

BYPASS VALVE

1

1501G

933124

INDICATOR, Filter Bypass

1

1501 H

62H54C1

ELEMENT, Filter

1

1501

N92138

O-RING, Bowl

1

1501J

926103

BOWL

1

1502

62F36

OIL FILTER, Low pressure return line (Includes items 1502A thru 1502G)

1

1502A

932026

INDICATOR, Filter Bypass

1

1502B

932947

HEAD

1

1502 C

930507

BYPASS VALVE

1

1502 D

62G45C1

ELEMENT, Filter

1

1502E

N72239

O-RING, Bowl

2

1502F

934251

BOWL

1

1502G

921088

PLUG, Drain

1

1503

---

NUT

2

1504

---

LOCKWASHER

2

1505

903393

SCREW, Drive

2

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

35

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 16 SUCTION STRAINER AND ACCESS COVERS Parts 1603 thru 1606 used on both sides of reservoir. 1603 1604

1605 1606 1601 1602 1607

FILLER CAP STRAINER

1608A

1608

1608A THRU 1608H

1608B 1608C 1608D

1608E

1608F

1608G

1608H

36

11/00

Parts Catalog

Telsmith Gyrasphere Model 52

HYDRAULIC POWER UNIT - RESERVOIR COMPONENTS (Refer to Figure 16)  Item No.

Part No.

Description

Qty

1601

62H97

STRAINER, Suction

1

1602

60X27

GAUGE, Oil level

1

1603

60T77

GASKET

2

1604

60T76

COVER, Access (w/drain)

1

61E90

COVER, Access (w/o drain)

1

1605

60T78

WASHER, Nylon

2

1606

26C50

BOLT

2

1607

23D06

DRAIN PLUG, Magnetic

1

1608

60T38

FILLER CAP STRAINER (Includes items 1608A thru 1608H)

1

1608A

---

SCREW

6

1608B

60T80

CAP

1

1608C

---

CHAIN

1

1608D

---

GASKET, Cap

1

1608E

---

FLANGE

1

1608F

---

GASKET, Flange

1

1608G

---

B A S K ET

1

1608H

---

GASKET, Flange

1

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

37

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 17 SOLENOID COIL - TYPE A

1701 1702

1703

1704

1705

SEE FIGURE 12 1712 1706 1710

1711

1709 1708 1707

SOLENOID COIL - TYPE B

SEE FIGURE 12

1714

1713

38

11/00

Parts Catalog

Telsmith Gyrasphere Model 52

HYDRAULIC POWER UNIT - SOLENOID COILS (Refer to Figure 17)  Item No.

Part No.

Description

Qty

1701

13010647

SCREW

4

1702

1300651

NAMEPLATE

1

1703

1300649

COVER

1

1704

1300828

GASKET, Cover

1

1705

1300648

JUNCTION BOX

1

1706

697833

NUT

1

1707

697161

BOOT

1

1708

697647

O-RING

1

1709

60Y14

COIL

1

1710

1301704

GASKET, Coil

1

1711

697715

ACTUATOR

1

1712

99X37

LOCATOR PIN

2

1713

118127-00

NUT

1

1714

851017

COIL

1

• Please identify parts by figure and item number if part number is not shown. Your Telsmith dealer will verify the correct part number for each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, alwa ys include your machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements.

39

11/00

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 18 1826

LABELS, NAMEPLATES AND DECALS - OIL SYSTEM 1801 1808 1802

1823 1824

1817 1818 1819

Item 1817

Item 1809

1825

1813 1814 1815 1816

1803

1820

1804 1831

1830

1827

1805

1828

1835 1834

1806 1807

1836 1851

Item 1821 1809 Item 1818

1833

1827

1821

1838

1805

1822

1810

1832 1829

1828 1811

1812

SEE FIGURE 20

Item 1820

Item 1822

1836 1837

1805 1808

1835 1850 1838

Item 1832

1839 1839A

1849 1848

SEE FIGURE 19

OIL COOLER (WATER-TYPE)

1849

1840 1836 1843 1838

1836 1846

1838 1835

1835

1836 1843 1844

1838

1836 1846 1844 1847 1845 SEE FIGURE 22

1841 1842

1841 1842

SEE FIGURE 21

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 18 1826

LABELS, NAMEPLATES AND DECALS - OIL SYSTEM 1808 1802

1823 1824

1817 1818 1819

Item 1817

Item 1809

1825

1813 1814 1815 1816

1801

1803

1820

1804 1831

1830

1827

1805

1828

1835 1834

1806 1807

1836 1851

Item 1821 1809 Item 1818

1833

1827

1821

1829

1838

1805

1822

1810

1832

1828 1811

1812

SEE FIGURE 20

Item 1820

Item 1822

1836 1837

1805 1808

1835 1850 1838

Item 1832

1839 1839A

1849 1848

SEE FIGURE 19

OIL COOLER (WATER-TYPE)

1849

1840 1836 1843 1838

1836 1846

1838 1835

1835

1836 1843 1844

1838

1836 1846

1841 1842

SEE FIGURE 21

1844 1847 1845 SEE FIGURE 22

1841 1842

40

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 OIL LUBRICATION MODULE - MAJOR COMPONENTS (Refer to Figure 18) 

Item No.

Part No.

Description

Qty

1801

20N85

PIPE CAP, 6 in.

1

1802

DA2-272-1547W

COVER, Oil tank

1

1803

20W25

GASKET, 18 in.

2

1804

20W25

GASKET, 74 in.

2

NS

12L87

ADHESIVE, 1/2 pint (use with items 1803 and 1804)

1805

23D20

PIPE PLUG, 1-1/4 in. sq. hd.

4

1806

EA2-272-1547W

OIL TANK, 110 gallon cap.

1

1807

28S56

GAUGE, Oil level

1

1808

23D22

PIPE PLUG, 2 in. sq. hd.

5

1809

BB-46-2155

LABEL, Check oil level

1

1810

26F21

SCREW, 3/4 x 2 in.

4

1811

26B48

WASHER, 3/4 in. hardened

8

1812

27D01

NUT, 3/4 in. -10

4

1813

26C53

SCREW, 3/8 x 1 in. hex hd. cap

4

1814

27L78

LOCKWASHER, 3/8 in.

4

1815

12K63

WASHER, 3/8 in. hardened

4

A/R

Parts Catalog

Telsmith Gyrasphere Model 52 OIL LUBRICATION MODULE - MAJOR COMPONENTS (Refer to Figure 18) 

Item No.

Part No.

Description

Qty

1801

20N85

PIPE CAP, 6 in.

1

1802

DA2-272-1547W

COVER, Oil tank

1

1803

20W25

GASKET, 18 in.

2

1804

20W25

GASKET, 74 in.

2

NS

12L87

ADHESIVE, 1/2 pint (use with items 1803 and 1804)

1805

23D20

PIPE PLUG, 1-1/4 in. sq. hd.

4

1806

EA2-272-1547W

OIL TANK, 110 gallon cap.

1

1807

28S56

GAUGE, Oil level

1

1808

23D22

PIPE PLUG, 2 in. sq. hd.

5

1809

BB-46-2155

LABEL, Check oil level

1

1810

26F21

SCREW, 3/4 x 2 in.

4

1811

26B48

WASHER, 3/4 in. hardened

8

1812

27D01

NUT, 3/4 in. -10

4

1813

26C53

SCREW, 3/8 x 1 in. hex hd. cap

4

1814

27L78

LOCKWASHER, 3/8 in.

4

1815

12K63

WASHER, 3/8 in. hardened

4

1816

27W64

SCREEN CLOTH, Brass, 10 mesh, 1 ft.-0 in. wide

1

1817

A-272-533

LABEL, Air-oil connection

1

1818

B-272-404

PLATE, Oil tank serial number

1

1819

11P12

SCREW, #6 x 3/8 in. drive

4

1820

D-273-696

LABEL, Fill oil tank

1

A/R

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

41

Telsmith Gyrasphere Model 52

Parts Catalog

OIL LUBRICATION MODULE - MAJOR COMPONENTS (Refer to Figure 18), continued  Item No.

Part No.

Description

Qty

1821

BD-46-2156

DECAL, Oil cooler temperature setting

1

1822

AA-46-2156

DECAL, Oil cooler warning

1

1823

C-17-123

PIPE NIPPLE, 3/4 x 3 in.

1

1824

23B98

ELBOW, 3/4 in., 90 degree pipe

1

1825

27S97

BREATHER, 3/4 in., NPT oil bath

1

1826

29C01

HEATER, Oil immersion

2

1827

29A61

DRAW CATCH

6

1828

23C51

ELBOW, Pipe street, 2 in., 90 degree

2

1829

BG1-272-1223W

HOSE ASSEMBLY, 2 in. ID x 29 in.

1

1830

60B93

CONNECTOR, Swivel, 2 in. F x M

1

1831

HH-17-125

NIPPLE, 1-1/4 x 7 in., TOE

1

1832

C-272-404

DECAL, Arrow marker

1

1833

23A37

BUSHING, Reducer, 2 in. to 1-1/4 in. pipe

1

1834

23C49

ELBOW, Pipe, 1-1/4 in., 90 degree

1

1835

23J54

CONNECTOR, Swivel, 1-1/4 in. SWF x 1-1/4 in. M

4

1836

60J62

INSERT, 1-1/4 in. hose

8

1837

60L03

HOSE, 1-1/4 in. ID X 2 ft., wire reinforced

1

1838

23C38

ELBOW, Pipe street, 1-1/4 in., 45 degree

5

1839

15R41

OIL FILTER (Includes item 1839A)

1

1839A

15H20

ELEMENT, Filter

2

1840

16Y01

SCREW, 1/2 x 3-3/4 in. hex hd. cap

2

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING OR DERING PARTS * * To be sure that you receive the correct parts, always include your machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements.

42

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 OIL LUBRICATION MODULE - MAJOR COMPONENTS (Refer to Figure 18), continued 

Item No.

Part No.

Description

Qty

1841

26D04

WASHER, 1/2 in. hardened

1842

27C95

NUT, 1/2 in. hex

8

1843

60L03

HOSE, 1-1/4 in. ID x 1 ft., wire reinforced

1

1844

23B47

COUPLING, Pipe reducer, 2 in. to 1-1/4 in.

2

1845

60V45

COOLER, Air-to-oil, direct drive

1

1846

60L03

HOSE, 1-1/4 in. ID x 1 ft., wire reinforced

1

1847

26E29

CAPSCREW, 1/2 x 1-1/2 in. hex hd.

6

1848

23F36

TEE, 1-1/4 in. pipe

1

1849

A-17-125

NIPPLE, Close, 1-1/4 in.

2

1850

61G42

VALVE, Relief

1

1851

60L03

HOSE, 1-1/4 in. ID x 1 ft., wire reinforced

1

14

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

43

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 19

1914

1913 1901

1906 1904

1907

1906

1912

1907 1902

1902 1904 1908 1905 1903

1907 1905

1906 1909

1908

1912 1902

1907 1906

Left-to-Right Oil Flow

44

1911 1910

Right-to-Left Oil Flow

11/00

Parts Catalog

Telsmith Gyrasphere Model 52

OIL LUBRICATION MODULE - GAUGE ASSEMBLY (Refer to Figure 19)  Item No.

Part No.

Description

Qty

1901

23C49

ELBOW, Pipe street, 1-1/4 in., 90 degree

1

1902

23F36

TEE, Pipe, 1-1/4 in.

3

1903

61D91

GAUGE, Oil pressure, 1/4 in., NPT, 0-200 psi

1

1904

11A13

BUSHING, Reducer, 1-1/4 in. to 1/4 in. pipe

2

1905

27W63

MULTI-CLAMP ASSEMBLY, 1-1/2 in.

2

1906

10E10

CAPSCREW, 3/8 x 1-1/4 in. hex hd.

8

1907

12K63

WASHER, 3/8 in. case hardened

8

1908

E-17-125

PIPE NIPPLE, 1-1/4 x 4 in.

2

1909

61G17

METER, Flow (right-to-left oil flow)

1

61G16

METER, Flow (left-to-right oil flow)

1

1910

27S46

GAUGE, Oil temperature, 1/2 in. NPT, 0-250 degrees F

1

1911

23A28

BUSHING, Reducer, 1-1/4 in. to 1/2 in. pipe

1

1912

A-17-125

NIPPLE, Close 1-1/4 x 1-5/8 in.

2

1913

C-17-43

NIPPLE, 1/4 x 7/8 in.

1

1914

61G78

SWITCH, Pressure

1

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

45

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 20

2011

2012

2001

2002 THRU 2012

2012 2010 2002

2010

2007 2008 2009

2003

2004 2006

2005

Figure 21

2108

2102 2103

2107

2104 2105 2106

2101

2102 THRU 2114

2107 2109 2110

2114

46

2111 2112 2113

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 OIL LUBRICATION MODULE - OIL PUMP (Refer to Figure 20)  Qty (380 V 50 Hz)

Qty (230/460 V 60 Hz)

Item No.

Part No.

Description

2001

61J97

OIL PUMP ASSEMBLY, 230/460 V (Complete)

-

1

61K02

OIL PUMP ASSEMBLY, 380 V (Complete)

1

-

2002

27S91

OIL PUMP

1

1

2003

61J93

COUPLING (Gear Reducer to Pump)

1

1

2004

27S92

GEAR REDUCER

-

1

27S93

GEAR REDUCER

1

-

2005

61J91

COUPLING (Motor to Gear Reducer)

1

1

2006

11X92

MOTOR, 5 HP, 1800 RPM, 230/460 V, 3-Phase, 60 Hz

-

1

16V68

MOTOR, 5 HP, 1500 RPM, 380 V, 3-Phase, 50 Hz

1

-

2007

26A04

SCREW, Hex hd., 1/2 x 5-1/2 in.

4

4

2008

27C95

NUT, Hex, 1/2 in.

4

4

2009

26D04

WASHER, Hardened, 1/2 in.

8

8

2010

---

GUARD, Coupling

2

2

2011

---

SCREW, 5/16 x 5/8 in. hex hd. cap

4

4

2012

---

LOCKWASHER, 5/16 in.

4

4

OIL LUBRICATION MODULE - OIL FILTER (Refer to Figure 21)  Item No.

Part No.

Description

Qty

2101

15R41

FILTER ASSEMBLY (Includes items 2102 thru 2114)

1

21 0 2

15R41C3

CAP, Oil Filter

1

21 0 3

15R41C9

PLUG, Filter Cap

1

21 0 4

15R41C2

O-RING, Filler Cap

1

21 0 5

15R41C8

SPRING

1

21 0 6

---

PLATE

1

21 0 7

15H20

ELEMENT, Filter

2

21 0 8

15H20C1

CONNECTOR

1

21 0 9

---

HOUSING, Filter

1

2110

---

O-RING, Filter Housing

1

2111

15R41C6

VALVE AND LINKAGE, (includes item 2112)

1

2112

15R41C4

VALVE, Bypass

1

2113

15R41C5

POINTER

1

2114

---

BLOCK ASSEMBLY

1

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

47

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 22

2201 2202

2210

2203 2204

2203 2211 2202

2205

2201

2205

2206

2207 2208 2208 2209

48

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 OIL LUBRICATION MODULE - OIL COOLER (WATER-TO-OIL) (Refer to Figure 22) 

Item No.

Part No.

Description

Qty

2201

23C38

ELBOW, Pipe street, 1-1/4 in., 45 degree

2

2202

23J54

CONNECTOR, Swivel, 1-1/4 in. SWF x 1-1/4 in. M

2

2203

60J62

INSERT, 1-1/4 in. hose

4

2204

60L03

HOSE, 1-1/4 in. ID x 1 ft., wire reinforced

1

2205

23A37

BUSHING, Reducer, 2 in. to 1-1/4 in. pipe

2

2206

27W60

OIL COOLER, Water-to-oil

1

2207

10V14

SCREW, 3/8 x 1-1/2 in. hex hd. cap

4

2208

12K63

WASHER, 3/8 in. hardened

8

2209

27C90

NUT, 3/8 in. hex

4

2210

23C49

ELBOW, Pipe street, 1-1/4 in. - 90 degree

1

2211

60L03

HOSE, 1-1/4 in. ID x 1 ft., wire reinforced

1

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

49

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 23

2302 2301

2305

2312 2305

2303 2304

2303 2311 2306

2306 2307 2308

2309

2309

2310

50

11/00

Parts Catalog

Telsmith Gyrasphere Model 52

OIL LUBRICATION MODULE - AIR-OIL AIR-OI L COOLER AN AND D WATER-TO-OIL COOLER  (Refer to Figure 23)  Item No.

Part No.

Description

Qty

2301

23B47

COUPLING, Pipe reducer, 2 in. to 1-1/4 in.

1

2302

23C49

ELBOW, Pipe, 1-1/4 in., 90 degree

1

2303

60J62

INSERT, 1-1/4 in. hose

4

2304

60L03

HOSE, 1-1/4 in. ID x 1.5 ft. wire reinforced

1

2305

23J54

CONNECTOR, Swivel, 1-1/4 in. SWF x 1-1/4 in. M

2

2306

23A37

BUSHING, Reducer, 2 in. to 1-1/4 in. pipe

2

2307

27W60

OIL COOLER, Water-to-oil

1

2308

10V14

CAPSCREW, 3/8 x 1-1/2 in. hex hd.

4

2309

12K63

WASHER, 3/8 in. hardened

8

2310

27C90

NUT, 3/8 in. hex

4

2311

60L03

HOSE, 1-1/4 in. ID x 1 ft., wire reinforced

1

2312

23C38

ELBOW, Pipe street, 1-1/4 in., 45 degree

1

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

51

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 24 2402 2401

2403 2409 2410 2404 2413 2414

2405

2426

2410

2422 2427

2428 2425

2409 2406

2417

2415 2416

2418

2423

2408

2424 2407 TO ANTI-SPIN GEARBOX (SEE FIGURE 10)

2402

2411

2412 2424

2405

2419 2420

2423 2422 2421

2418 2419 2420

52

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 OIL FEED LINES  (Refer to Figure 24) 

Item No.

Part No.

Description

Qty

2401

11G77

SIGHT GAUGE, Oil flow, 3/8 in.

1

2402

23L53

ELBOW, Male, 6-6

2

2403

H0610-06062222-013

HOSE ASSEMBLY

1

2404

12W74

TEE, Union run

1

2405

H0610-06062222-070

HOSE ASSEMBLY

1

2406

62D90

CLAMP SET, 5/8 in. hose

5

2407

62D91

PLATE, 5/8 in. hose cover

5

2408

13M81

CAPSCREW, 3/8 x 1-3/4 in. hex hd.

10

2409

10E10

CAPSCREW, 3/8 x 1-1/4 in. hex hd.

4

2410

27L78

LOCKWASHER, 3/8 in.

4

2411

60N51

GROMMET, 2-1/2 x 1-3/4 in. rubber

1

2412

BH-272-2303W

BRACKET, Support

1

2413

27W63

MULTI-CLAMP ASSEMBLY, 1-1/2 in.

1

2414

AK-17-125

NIPPLE, 1-1/4 x 34-1/2 in.

1

2415

10Z99

BUSHING, Reducing, 1-1/4 x 3/8 in.

1

2416

23F36

TEE, Pipe, 1-1/4 in.

1

2417

23C49

ELBOW, 1-1/4 in. 90 degree street

1

2418

23J54

CONNECTOR, Swivel, 1-1/4 in. SWF x 1-1/4 in. M

2

2419

60L03

HOSE, 1-1/4 in. ID x 20 ft.

1

2420

60J62

COUPLING, Hose, 1-1/4 in.

2

2421

20X06

CAPSCREW, 5/16-18 x 1-1/2 in. hex hd.

2

2422

62D48

PLATE, Cover, 1/4 in. hose

3

2423

62D47

CLAMP SET, 1/4 in. hose

3

2424

H0410-06062222-054

HOSE ASSEMBLY

1

2425

15C82

CAPSCREW, 5/16 x 1-1/4 in. hex hd.

2

2426

12T24

CAP, 3/8 in. tube (crushers w/o anti-spin option only)

1

2427

62D89

PLATE, 5/8 in. weld

A/R

2428

62D46

PLATE, 1/4 in. weld

A/R

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

53

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 25

2501

2502

2503

2506 2513

2506 2504

2514

2510 2505

2516

2516

2507 2506

2508

2507

2510 2506 2512

2509

2515

2511

54

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 OIL RETURN LINES  (Refer to Figure 25) 

Item No.

Part No.

Description

Qty

2501

JJ-17-129

NIPPLE, Toe 3 in. x 3 ft. - 3/4 in.

1

2502

16V37

ELBOW, 3 in. F x F 90 degree

1

2503

DR-17-129

NIPPLE, Toe, 3 x 27 in.

1

2504

13E80

JOINT, 3 in. flexmaster

1

2505

DZ-17-129

NIPPLE, Toe, 3 x 19 in.

1

2506

13F68

TEE, 3 in.

3

2507

28V52

BUSHING, 3 to 1/2 in. reducing

2

2508

23D13

PLUG, 1/2 in. sq. hd. (w/out air-oil cooler only)

1

2509

60G89

SWITCH, Air-oil cooler fan temperature (if equipped)

1

2510

B-17-129

NIPPLE, Close, 3 x 3 in.

2

2511

60B49

GAUGE, Temperature, 0-250 degrees F

1

2512

DA-272-1253

BUSHING, 3 to 1/2 in. eccentric reducer

1

2513

60J52

FLOW SWITCH

1

2514

15E83

BUSHING, 3 to 1 in. reducing

1

2515

60G89

SWITCH, Alarm temperature (all models)

1

2516

C-17-129

NIPPLE, Close, 3 x 3-1/2 in.

2

NOTE: Actual piping arrangement may vary, vary, depending on oil system location, crusher foundation and other design variables.

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

55

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 26 (1 of 2) 2635 2634

2601

2602 thru 2661

2603

2604 thru 2635

2639 2634

2633

2634 2602

2603 2632 2638

2638 2637

See below for exploded view

2636

2634 2637 2633 2632

2638

See Figure 26 (2 of 2) for exploded view 2624 2604 2617 2631 2628

2605

2629

2616 2630

2615

2606

2608

2607

2627

2610 2611 2626 2609 2612 2613 2623

2622 2623 2621 2625

56

2620

2619 2618

2610 2611 2614

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 ALARM PANEL ASSEMBLY ASSEMBLY (Refer to Figure 26) 

Item No.

Part No.

Description

Qty

2601

TA-260-652A

ALARM ASSEMBLY, Shutdown (with 380V transformer)

1

2602

SA-2 SA-260 60-6 -652 52A A QA-260-652

ALAR ALARM M ASS ASSEM EMBL BLY Y, Shut Shutdo down wn (wit (with h 480V 480V tran transf sfor orme mer) r) PLATE, Support

1

2603 2604 2605 2606

AA3-272-1652A 61L27 26X80 27N69

PANEL, Shutdown alarm ENCLOSURE SWITCH, Door LOCKWASHER, #6

1 1 1 2

2607 2608 2609

27J26 29D22 61G70

SCREW, #6-32 x 3/8 in. rnd. hd. PANEL RELAY, Time delay (TR1)

2 1 1

2610 2611

27J84 27L97

SCREW, #8-32 x 1/2 in. rnd. hd. machine LOCKWASHER, #8

6 6

2612 2613 2614 2615

----60C56 61N78

GUIDE, Wire TAPE, Double sided CHANNEL, Mounting END CLAMP

2616 2617 2618

60C54 60C55 ---

END BARRIER BLOCK, Terminal SCREW, #10-32 x 5/8 in. rd. hd.

2619 2620

-----

NUT, KEPS LUG, #10 ground

1 1

2621

---

NUT, #10-32 hex

1

2622 2623 2624

--26X85 CB1-46-2155

SCREW, #8-32 x 1-3/4 in. rnd. hd. PUSH-BUTTON LABEL, Wiring Schematic

4 1 1

2625 2626

A-46-2156 61E93

LABEL, Danger, Electrocution hazard NAMEPLATE, Horn test

1 1

2627 2628 2629

61E71 -----

HORN, Alarm SCREW, 1/4 x 3/4 in. rnd. hd. (included with item 2627) WASHER, #8

1 4 4

2630

---

LOCKWASHER, #8

4

2631 2632

-----

NUT, #8 NUT, 1/4 in. - 20

4 8

2633 2634 2635 2636 2637

27L76 ----20B04 20F18

WASHER, 1/4 in. lock WASHER, 1/4 in. BOLT, 1/4 in. - 20 x 3/4 in. hex hd. CONDUIT, 1/2 in. SEAL, O-ring

2638 2639

20C62 27C42

LOCKNUT, 1/2 in. conduit SCREW, 1/4 x 1/2 in. rnd. hd.

A/R A /R 1 2 1 11 1

8 16 4 1 2 2 4

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

57

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 26 (2 of 2)

2641

2642 thru 2661

2656 2653 2659 2644

2642

2660

2661

2658 2643

2645 2657

2654 2655 2656

2653

2646

2646

2647

2647 2648 2651

2648

2650

2652

2649

CONTROL RELAY

2640

(Install in starter cabinet)

58

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 ALARM PANEL ASSEMBLY, continued (Refer to Figure 26) 

Item No.

Part No.

Description

Qty

2640

61G59

RELAY, Control (CR-1)

1

2641

PA-260-652A

TRANSFORMER ASSEMBLY, 380V (Includes parts 2643 thru 2661)

1

NA-260-652A

TRANSFORMER AS ASSEMBLY, 48 480V (I (Includes pa parts 26 2643 th thru 26 2661)

1

2642

61K76

ENCLOSURE

1

2643

61T77

TRANSFORMER, 380V primary, 120V secondary, 500VA

1

16G55

TRANSFORMER, 480V primary, 120V secondary, 500VA

1

61H99

CIRCUIT BREAKER, 2 pole, 4A

1

2645

29D24

SUBPANEL

1

2646

---

WASHER, #10

8

2647

---

LOCKWASHER, #10

8

2644

2648

---

SCREW, Rnd. hd. machine, 10/32 x 1/2 in.

8

2649

---

SCREW, #10-32 X 5/8 in. rd. hd.

1

2650

---

NUT, KEPS

1

2651

---

LUG, #10 ground

1

2652

---

NUT, #10-32 ground

1

2653

61N71

CHANNEL, 6 in. mounting

1

2654

60C55

TERMINAL BLOCK

4

2655

60C54

END BARRIER, Terminal block

1

2656

61N78

END CLAMP, Terminal block

4

2657

---

SCREW, #8-32 x 1-3/4 in. rd. hd.

4

2658

62A51

NAMEPLATE, 120 volt

1

2659

61T71

NAMEPLATE, 380 volt (used with 380V primary only)

2660

61R59

NAMEPLATE, 480 volt (used with 480V primary only)

1

2661

61J09

CIRCUIT BREAKER, 1 pole, 6A

1

•Please identify parts by figure and item number if part number is not shown. Your Telsmith dealer will verify the co rrect part number for each part ordered. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements.

59

11/00

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 27 2719 2705 2711 2701 2711

2701

2701

2702 2712

2712 2709 2710

2713

2705 2706 2715 2720 2705 2704 2705 2717 2715 2705 2707

2708

2718

2716

2716

Item 2710 Item 2701

2714

2703

Item 2713 Item 2716

Item 2704

Item 2709 Item 2708 Item 2702

Item 2714

Item 2717

Item 2715

Item 2718

Item 2706 Item 2719 Item 2711

Item 2703

Item 2707

Item 2720

Item 2712

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 27 2719 2705 2711 2701 2711

2701

2701

2702 2712

2712 2709 2710

2713

2705 2706 2715 2720 2705 2704 2705 2717 2715 2705 2707

2708

2718

2716

2716

Item 2710 Item 2701

2714

2703

Item 2713 Item 2716

Item 2704

Item 2709 Item 2708 Item 2702

Item 2714

Item 2717

Item 2715

Item 2718

Item 2706 Item 2719 Item 2711

Item 2703

Item 2707

Item 2720

Item 2712

60

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 NAMEPLATES, LABELS, AND DECALS (Refer to Figure 27) 

Item No.

Part No.

Description

Qty

2701

A-46-1993

DECAL, Caution Pinch Point

5

2702

F-46-1993

DECAL, Caution Guards

4

2703

A10-46-2007

PLATE, Gyrasphere Patent

1

2704

FA-46-1901

PLATE, Telsmith Logo, Trademark

1

2705

11P12

SCREW, Drive, No. 6 x 3/8 in.

2706

B1-46-2006

PLATE, Serial Number

1

2707

D-272-404

PLATE, Smithbond Name

1

2708

A-46-1928

DECAL, Warning Avoid Personal Injury

1

2709

B2-46-1685

TAG, Gyrasphere Instruction

1

2710

A-46-2155

TAG, Gyrasphere Smithbond

1

2711

AB-46-1901

LOGO, Telsmith (Small)

2

2712

AD-46-1901

STRIPE, Small, 12.5 ft. lg.

1

2713

C-272-404

MARKER, Arrow

1

2714

A-46-2103

DECAL, Warning Hydraulic Lines

1

2715

C-46-2103

DECAL, Warning Ground

1

2716

BA1-46-2155

DECAL, Telsmith Quality

2

2717

B-46-2103

DECAL, Caution

1

2718

BA 46 2156

DECAL Warning

1

16

Parts Catalog

Telsmith Gyrasphere Model 52 NAMEPLATES, LABELS, AND DECALS (Refer to Figure 27) 

Item No.

Part No.

Description

Qty

2701

A-46-1993

DECAL, Caution Pinch Point

5

2702

F-46-1993

DECAL, Caution Guards

4

2703

A10-46-2007

PLATE, Gyrasphere Patent

1

2704

FA-46-1901

PLATE, Telsmith Logo, Trademark

1

2705

11P12

SCREW, Drive, No. 6 x 3/8 in.

2706

B1-46-2006

PLATE, Serial Number

1

2707

D-272-404

PLATE, Smithbond Name

1

2708

A-46-1928

DECAL, Warning Avoid Personal Injury

1

2709

B2-46-1685

TAG, Gyrasphere Instruction

1

2710

A-46-2155

TAG, Gyrasphere Smithbond

1

2711

AB-46-1901

LOGO, Telsmith (Small)

2

2712

AD-46-1901

STRIPE, Small, 12.5 ft. lg.

1

2713

C-272-404

MARKER, Arrow

1

2714

A-46-2103

DECAL, Warning Hydraulic Lines

1

2715

C-46-2103

DECAL, Warning Ground

1

2716

BA1-46-2155

DECAL, Telsmith Quality

2

2717

B-46-2103

DECAL, Caution

1

2718

BA-46-2156

DECAL, Warning

1

2719

B-46-2500

PLATE, Dynamic adjust

1

2720

A-46-2500

PLATE, Silver bullet series

1

NS

29D17

PRIMER, Red Oxide (One gallon)

4

NS

11A62

PAINT, Telsmith Gray (One gallon)

8

NS

61K21

PAINT, Ivory (One gallon)

8

16

NOTE: • See Figure 12 for hydraulic system nameplates. • See Figure 18 for oil system nameplates.

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

61

Telsmith Gyrasphere Model 52

Parts Catalog

Figure 28

2801

2802

2806

2803

2805

2804

62

11/00

Parts Catalog

Telsmith Gyrasphere Model 52 SERVICE TOOLS (Refer to Figure 28) 

Item No.

Part No.

Description

Qty

2801

10K58

EYE BOLT, 1-1/2 in.

1

2802

10E12

EYE BOLT, 1 in.

2

2803

TL-272-1503W

SAFETY SPACER

3

2804

AA-272-2344

LIFTING PLATE, Main drive gear

1

2805

EB-272-2373W

DRIVE KEY EXTENSION

3

2806

BB-272-1534W

WRENCH, Shaft nut

1

• Please identify parts by figure and item number if part number is not shown. Your Telsmith Telsmith dealer will verify the correct part number for

each part orderred. • All fasteners are Grade 5 unless otherwise specified. A/R = As Required. NS = Not Shown. NSS = Not Sold Separately.

* * ALWAYS ALWAYS INCLUDE SERIAL NUMBER WHEN ORDERING PARTS * * To be sure that you receive the correct parts, always include your machine’ machine’s serial number when ordering. The actual parts used on your machine may be different than shown in this book due to fabrication variables, custom engineering, or product improvements. 11/00

63

Telsmith Gyrasphere Model 52

Parts Catalog

NOTES 

64

11/00