Tc1001 06 Cameron Top

www.camerondiv.com

www.camerondiv.com

2006 Drilling Replacement Parts Catalog

Ram Availability Ram Availability Chart Description Pipe Rams Avail. To Fit Standard Pipe Sizes Variable Bore Rams Available

TL/T BOP

UM/UL/U BOP

U II BOP

Yes

Yes

Yes

Yes In Some BOP Sizes

Yes In Some BOP Sizes

Yes

Yes

ISR Shear Rams Available

Yes In Some BOP Sizes In Some BOP Sizes In Some BOP Sizes In Some BOP Sizes

In Some BOP Sizes In Some BOP Sizes

Super Shear Casing Ram

Yes

In Some BOP Sizes In Some BOP Sizes Yes

Grip and Seal Rams Available

No

CAMRAM Top Seals Standard

Yes

CAMRAM Packers Standard CAMRAM 350 Packers and Top Seals Available Rams Suitable for H2S Service Ram Wear Pads - Standard

FLEXPACKER Rams Available Shearing Blind Rams Available DVS Shear Rams Available

(Through 16-3/4”)

No

In Some BOP Sizes Yes

Yes

(Through 18-3/4”)

(Through 18-3/4”)

Yes

In Some BOP Sizes

In Some BOP Sizes

Yes

Yes

Yes

Yes Yes

Yes Available

Yes Available

No

About this Catalog

The purpose of this catalog is to serve as a quick reference for our customers. However, many of Cameron’s products are designed to customer specific requirements. All the information contained in this catalog is generic, weights, dimensions, part numbers, etc. should be confirmed for your specific equipment.

TC1001-06

9

© 2006 Cameron International Corporation

Table of Contents U™ BOP Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Hydraulic Control System. . . . . . . . . . . . . . . . . . . . . . . . . . 16 Operating Data and Fluid Requirements . . . . . . . . . . . . . . . . . 16 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Part Numbers 7-1/16” 3000 - 7-1/16" 15,000 . . . . . . . . . . . . . . . . . . . . . . . 21 11” 3000 - 11” 15,000. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 13-5/8" 3000 - 13-5/8" 15,000 . . . . . . . . . . . . . . . . . . . . . . . 23 16-3/4” 3000 - 18-3/4” 10,000 . . . . . . . . . . . . . . . . . . . . . . . 24 20-3/4" 3000 - 26-36/4" 3000 . . . . . . . . . . . . . . . . . . . . . . . . 25 Bonnet Rebuild Softgoods Kits. . . . . . . . . . . . . . . . . . . . . . . 26 Drill Pipe Shearing Requirements . . . . . . . . . . . . . . . . . . . . . 28 Lifting Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Large Bore Shear Bonnet . . . . . . . . . . . . . . . . . . . . . . . . . 29 Large Bore Shear Bonnet Softgoods Kits . . . . . . . . . . . . . . . . . 30 Tandem Boosters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 UM™ BOPs Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Hydraulic Control System. . . . . . . . . . . . . . . . . . . . . . . . . . 34 Operating Data and Fluid Requirements . . . . . . . . . . . . . . . . . 35 Specifications and Dimensions

. . . . . . . . . . . . . . . . . . . . . . 37

Part Numbers 7-1/16” 5000 - 15,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 11” 5000 & 10,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 11" 15,000. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 13-5/8” 5000 & 10,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Minimum Shearing Configurations . . . . . . . . . . . . . . . . . . . . 49

TC1001-06

10

© 2006 Cameron International Corporation

Tandem Boosters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 U™, UL™ and UM™ BOPs Standard Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Pipe Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Hang-Off Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Shearing Blind Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 H2S Shearing Blind Ram . . . . . . . . . . . . . . . . . . . . . . . . . . 61 DS Shearing Blind Rams . . . . . . . . . . . . . . . . . . . . . . . . . . 62 ISR Shearing Blind Rams . . . . . . . . . . . . . . . . . . . . . . . . . . 63 DSI and DVS Shear Rams . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Variable Bore Rams

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

FLEXPACKERs and FLEXPACKER-NRs . . . . . . . . . . . . . . . . . . . . 66 Inserted Packers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 CAMRAM 350 Packers and Top Seals . . . . . . . . . . . . . . . . . . . 68 Optional Ram Wear Pads . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Hydraulic Bonnet Bolt System . . . . . . . . . . . . . . . . . . . . . . . 69 Bonnet Seals and Connecting Rod Seals

. . . . . . . . . . . . . . . . . 70

Bonnet Seal Carriers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 UII™ BOP Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Hydraulic Control System. . . . . . . . . . . . . . . . . . . . . . . . . . 74 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Pipe Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Variable Bore Rams

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Bonnet Seals and Connecting Rod Seals

. . . . . . . . . . . . . . . . . 80

Shearing Blind Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 CAMRAM 350 Packers and Top Seals . . . . . . . . . . . . . . . . . . . 82 CAMRAM High Temp Shearing Blind Ram Blade & Side Packers . . . . . 82 Optional Wear Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

TC1001-06

11

© 2006 Cameron International Corporation

T™ BOP Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Hydraulic Control System. . . . . . . . . . . . . . . . . . . . . . . . . . 84 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Part Numbers 13-5/8” 10,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 18-3/4” 15,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 High Temp Connecting Rod Seals . . . . . . . . . . . . . . . . . . . . . 90 TL™ BOP Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Specifications and Dimensions

. . . . . . . . . . . . . . . . . . . . . . 95

RamLock Bonnet Subassembly Components . . . . . . . . . . . . . . . 96 RamLock Operating Piston Subassemblies . . . . . . . . . . . . . . . . 101 ST Lock Bonnet Subassembly Components . . . . . . . . . . . . . . . . 104 ST Lock Assembly Components. . . . . . . . . . . . . . . . . . . . . . . 106 Sequencing Valve Assembly Components . . . . . . . . . . . . . . . . . 107 Wedgelock Bonnet Subassembly Components . . . . . . . . . . . . . . 108 Manual Locking Screw Bonnet Components . . . . . . . . . . . . . . . 110 Super Shear Bonnets . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Tandem Boosters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 T and TL BOP Pipe Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 Shearing Blind Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117 High Temp & Severe Service Packers . . . . . . . . . . . . . . . . . . . . 118 DVS Shear Rams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119 Non-Sealing Super Shear Rams . . . . . . . . . . . . . . . . . . . . . . 119 Flexpacker and Flexpacker-NR . . . . . . . . . . . . . . . . . . . . . . . 119 Variable Bore Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

TC1001-06

12

© 2006 Cameron International Corporation

Ram Wear Pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 C™ BOP Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 Operating Data and Fluid Requirements . . . . . . . . . . . . . . . . . 124 Hydraulic Control System. . . . . . . . . . . . . . . . . . . . . . . . . . 124 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 Part Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Sequencing Valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129 DSI Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Shearing Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131 S/QRC™ and G-2™ BOPs Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 Pipe Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134 Shear Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135 Wireline Rams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 CTB Coiled Tubing BOP Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137 QBH/QBM Snubbing/Coiled Tubing BOP's Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138 D™ and DL™ BOPs Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 Dimensions and Weights . . . . . . . . . . . . . . . . . . . . . . . . . . 142 Part Numbers 7-1/16” 3000 - 20,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 11” 3000 - 15,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145 13-5/8” 5000 - 16-3/4” 5000 . . . . . . . . . . . . . . . . . . . . . . . . 147 18-3/4” 5000 - 18-3/4" 10,000 . . . . . . . . . . . . . . . . . . . . . . . 149 20-3/4" 3000 - 21-1/4" 5000 . . . . . . . . . . . . . . . . . . . . . . . . 151 Replacement Part Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

TC1001-06

13

© 2006 Cameron International Corporation

Annular Stripper Packer . . . . . . . . . . . . . . . . . . . . . . . . . . 155 Severe Service Annular Packer . . . . . . . . . . . . . . . . . . . . . . . 155 High Temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155

Clamp Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156 F Cup Tester . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158 Cameron Terms and Conditions . . . . . . . . . . . . . . . . . . . . . . 159

TC1001-06

14

© 2006 Cameron International Corporation

U BOP Hydraulic Control System The U blowout preventer is designed so that hydraulic pressure opens and closes the rams and provides the means for quick ram change-out. Ram closing pressure closes the rams. When the bonnet bolts are removed, closing pressure opens the bonnet. After the bonnet has moved to the fully extended position, the ram is clear of the body. An eyebolt can be installed in the top of each ram to lift it out of the preventer. Ram opening pressure opens the rams. Following ram change-out, this pressure closes the bonnets. The rams are pulled outward, near the bonnets, before the bonnets begin moving toward the preventer body. This assures that the rams never obstruct the bore or interfere with the pipe in the hole. Hydraulic pressure draws the bonnets tightly against the preventer body and the bonnet bolts are reinstalled to hold the bonnets closed.

U BOP Operating Data and Fluid Requirements

Bore Size and Working Pressure

Gals to Open Pipe Rams (1 Set)

Gals to Close Pipe Rams (1 Set)

1.3

1.3

7-1/16” All WP

Large Bore Shear Bonnet Operating Data and Fluid Requirements

Locking Screw Closing Opening Turns Ratio Ratio (Each End) 18

11” Except 15,000 psi

3.4

3.5

27

11” 15,000 psi

5.7

5.8

32

6.9:1

Bore Size and Working Pressure

Gals to Open Pipe Rams (1 Set)

Gals to Close Pipe Rams (1 Set)

Locking Screw Turns (Each End)

Closing Ratio

Opening Ratio

2.2:1

7-1/16” All WP

-

-

-

-

-

7.3:1

2.5:1

11” Except 15,000 psi

6.8

7.0

27

12.0:1

4.8:1

9.8:1

2.2:1

11” 15,000 psi

8.9

9.0

32

15.2:1

3.7:1

10.5

10.9

32

10.8:1

4.5:1

13-5/8” Except 15,000 psi

5.5

5.8

32

7.0:1

2.3:1

13-5/8” Except 15,000 psi

13-5/8” 15,000 psi Model B

10.4

10.6

45

10.6:1

3.6:1

13-5/8” 15,000 psi Model B

16.0

16.2

45

16.2:1

6.0:1

16-3/4” 3000 psi Model B

9.8

10.6

38

6.8:1

2.3:1

16-3/4” 3000 psi Model B

18.2

19.0

38

10.4:1

4.4:1

16-3/4” 5000 psi Model B

9.8

10.6

38

6.8:1

2.3:1

16-3/4” 5000 psi Model B

18.2

19.0

38

10.4:1

4.4:1

16-3/4” 10,000 psi

11.6

12.5

45

6.8:1

2.3:1

16-3/4” 10,000 psi

18.2

19.1

45

10.4:1

4.4:1

18-3/4” 10,000 psi

21.3

23.1

54

7.4:1

3.7:1

18-3/4” 10,000 psi

-

-

-

-

-

20-3/4” 3000 psi

8.1

8.7

46

7.0:1

1.3:1

20-3/4” 3000 ps

14.3

14.9

46

10.8:1

1.7:1 1.7:1

21-1/4” 2000 psi

9.0

8.7

46

7.0:1

1.3:1

21-1/4” 2000 psi

14.3

14.9

46

10.8:1

21-1/4” 5000 psi

27.3

30.0

54

7.2:1

4.0:1

21-1/4” 5000 psi

-

-

-

-

-

21-1/4” 10,000 psi

24.5

26.9

51

7.2:1

4.0:1

21-1/4” 10,000 psi

-

-

-

-

-

26-3/4” 3000 psi

10.1

10.8

58

7.0:1

1.0:1

26-3/4” 3000 ps

-

-

-

-

-

TC1001-06

16

© 2006 Cameron International Corporation

U BOP Specifications The following specifications apply to typical Cameron U type BOPs. Your Cameron representative can provide information on non-standard BOP assemblies. • Side outlets to 4-1/16” (7-1/16” on 26-3/4” BOPs) can be provided beneath each set of rams on either or both sides of U BOPs. Side outlets can be studded, open-face flange or clamp hub with the same pressure rating as the vertical run connections. • Flanges conform to API standard 6A and/or 16A. Hubs conform to API 16A or applicable standards. Type 6BX flanges are standard for 10,000 and 15,000 psi working pressures and for 5000 psi for 13-5/8” and larger bore BOPs. Hydraulic control connections for operation of rams and bonnets are 1” NPT. There are two connections for each set of rams. Wedgelock connections are ½” NPT.

The capital letters in the following designations refer to the U BOP dimensional views and dimensional charts shown on the following pages. A-1 A-2 A-3 A-4 B-1 B-2 B*** C D E-1 E-2 F-1 F-2 G H-1 H-2 J

Length - bonnets closed, locking screws locked Length - bonnets opened, locking screws unlocked Length - bonnets closed, with wedgelocks Length - bonnets opened, with wedgelocks Height - flanged Height - clamp hubs Height - added height if 30” spacing is required for double Width - no side outlets Centerline of preventer to outlet flange or hub face. This distance is variable and must be determined per individual specifications. Centerline of side outlet below rams to bottom flange face Centerline of side outlet below rams to bottom hub face Top of upper ram to top flange face Top of upper ram to top hub face Height of ram Centerline of side outlet between rams to bottom flange face Centerline of side outlet between rams to bottom hub face Top of lower ram to bottom of upper ram

Note: All weights listed are based on utilizing closed die forgings.

TC1001-06

17

© 2006 Cameron International Corporation

U BOP Single Open Faced Flange or Clamp Hub Dimensions

C D

Top View Single or Double U BOP

A

F

G

B

E

Side View Single U BOP

SD 034601

Pressure Rating (psi)

Vertical Bore (in.)

A-1 (in.)

A-2 (in.)

A-3 (in.)

A-4 (in.)

B-1 (in.)

7-1/16*

3000

7-1/16

74.00

109.50

-

-

24.06

-

20.25

8.75

-

7.84

-

5.50

2600

7-1/16*

5000

7-1/16

74.00

109.50

-

-

27.50

25.19

20.25

10.41

9.25

9.63

8.47

5.50

2800

7-1/16

10,000

7-1/16

74.00

109.50

-

-

30.56

27.19

20.63

11.06

9.38

12.03

10.34

5.50

3550

7-1/16

15,000

7-1/16

74.00

109.50

-

-

31.81

-

20.63

11.69

-

12.66

-

5.50

3800

11*

3000

11

96.25

146.88

-

-

29.06

-

25.13

9.81

-

10.53

-

6.75

5300

11*

5000

11

96.25

146.88

110.13

150.19

34.31

29.31

25.13

12.44

9.94

13.16

10.66

6.75

5600

Size (in.)

B-2 (in.)

C (in.)

E-1 (in.)

E-2 (in.)

F-1 (in.)

F-2 (in.)

G (in.)

Approx. Weight (lb)

11*

10,000

11

96.25

146.88

110.13

150.19

35.69

32.19

25.75

13.13

11.38

13.84

12.09

6.75

6400

11 Model 79

15,000

11

124.00

175.31

124.50

167.13

44.81

33.88

32.00

16.69

11.22

17.78

12.31

9.25

10,300

13-5/8

3000

13-5/8

112.13

171.50

122.69

166.06

31.31

-

29.25

10.31

-

11.53

-

7.50

7200

13-5/8

5000

13-5/8

112.13

171.50

122.69

166.06

33.81

31.94

29.25

11.56

10.63

12.78

11.84

7.50

7700

13-5/8

10,000

13-5/8

114.13

172.75

124.69

167.31

41.69

32.81

30.25

15.13

10.69

17.09

12.66

7.50

10,300

13-5/8 Model B*

15,000

13-5/8

139.00

214.38

152.25

205.50

53.69

42.00

39.50

21.38

15.50

22.84

17.00

8.00

23,700

16-3/4 Model B

3000

16-3/4

127.25

204.56

147.25

199.38

40.06

31.75

35.75

13.31

9.16

15.41

11.25

9.25

13,700

16-3/4 Model B

5000

16-3/4

129.25

202.13

149.25

202.25

43.06

34.94

35.75

14.81

10.75

16.91

12.84

9.25

13,750

16-3/4*

10,000

16-3/4

139.00

218.38

155.50

212.00

49.69

41.94

39.50

19.38

15.50

20.22

16.34

9.25

23,300

18-3/4

10,000

18-3/4

156.38

242.13

166.50

226.63

56.00

43.23

42.50

20.50

13.88

22.00

15.34

12.00

28,900

20-3/4

3000

20-3/4

143.69

226.81

163.94

223.88

40.56

33.31

39.52

14.31

10.69

16.28

12.66

8.00

13,650

21-1/4

2000

21-1/4

143.69

226.81

163.94

223.88

37.9

33.31

39.52

12.63

10.69

14.59

12.66

8.00

13,250

21-1/4

5000

21-1/4

164.25

247.25

180.94

239.25

50.94

46.13

42.50

17.97

17.19

18.72

14.69

13.50

30,000

21-1/4*

10,000

21-1/4

163.38

250.38

181.13

239.50

66.00

53.00

47.25

24.53

18.03

26.25

19.75

13.50

34,650

26-3/4

3000

26-3/4

169.63

275.38

-

-

48.31

-

46.25

17.44

-

19.91

-

8.00

24,000

* Available with stud X flange connection Weights shown are for flange X flange top/bottom

Note: All weights listed are based on utilizing closed die forgings. TC1001-06

18

© 2006 Cameron International Corporation

U BOP Double Open Faced Flange or Clamp Hub Dimensions

C D Top View - Single or Double U BOP

A

F G J

B G

H E SD 034600

Side View - Double U BOP

Size (in.)

Press. Rating (psi)

Vert. Bore (in.)

A-1 (in.)

A-2 (in.)

A-3 (in.)

A-4 (in.)

B-1 (in.)

7-1/16*

3000

7-1/16

74.00

109.50

-

-

41.00

-

-

7.84

-

7-1/16*

5000

7-1/16

74.00

109.50

-

-

44.19

41.88

18.81 20.25 10.41

9.25

9.63

8.47

7-1/16

10,000 7-1/16

74.00

109.50

-

-

48.63

45.25

17.44 20.63 11.06

9.38

12.03 10.34

7-1/16

15,000 7-1/16

74.00

109.50

-

-

49.88

-

17.44 20.63 11.69

-

12.66

-

-

-

49.25

-

16.56 25.13

-

10.53

-

B-2 (in.)

B*** (in.)

C (in.)

18.56 20.25

E-1 (in.)

8.75

9.81

E-2 (in.)

F-1 (in.)

F-2 (in.)

G (in.)

Approx. Weight (lb)

H-1 (in.)

H-2 (in.)

J (in.)

5.50

25.69

-

11.44

5000

5.50

27.09 25.94 11.19

5200

5.50

29.13 27.44 12.56

6400

5.50

29.75

-

12.56

6750

6.75

30.00

-

13.44

11*

3000

11

96.25

146.88

11*

5000

11

96.25

146.88 110.13 150.19

54.50

49.50

16.56 25.13 12.44

13.16 10.66

6.75

32.63 30.13 13.44

10,200

11*

10,000

11

96.25

146.88 110.13 150.19

55.88

52.38

16.56 25.75 13.13 11.38 13.84 12.09

6.75

33.31 31.56 13.44

11,300

11" Model 79

15,000

11

124.00

175.31 124.50 167.13

69.75

58.81

14.31 32.00 16.69 11.22 17.78 12.31

9.25

41.63 36.16 15.69

18,400

13-5/8

3000

13-5/8 112.13

171.50 122.69 166.06

53.38

-

7.50

32.38

14.56

14,300

13-5/8

5000

13-5/8 112.13

171.50 122.69 166.06

55.88

54.00

15.44 29.25 11.56 10.63 12.78 11.84

7.50

33.63 32.69 14.56

14,800

13-5/8

10,000 13-5/8 114.13

172.75 124.69 167.31

66.63

57.75

12.56 30.25 15.13 10.69 17.09 12.66

7.50

40.06 35.63 17.44

18,400

13-5/8 Mod B*

15,000 13-5/8 139.00

214.38 152.25 205.50

81.75

70.13

9.94

8.00

49.44 43.56 20.06

43,250

15.44 29.25 10.31

9.94

-

11.53

-

39.50 21.38 15.50 22.84 17.00

-

9900

16-3/4” Mod B

3000

16-3/4 127.25

204.56 147.25 199.38

65.88

57.56

13.44 35.75 13.31

15.41 11.25

9.25

39.13 34.97 16.56

26,650

16-3/4 Mod B

5000

16-3/4 129.25

202.13 149.25 202.25

68.88

60.75

13.44 35.75 14.81 10.75 16.91 12.84

9.25

40.63 36.56 16.56

26,940

16-3/4*

10,000 16-3/4 139.00

218.38 155.50 212.00

77.75

70.00

11.19 39.50 19.38 15.50 20.22 16.34

9.25

47.44 43.56 18.81

43,500

18-3/4

10,000 18-3/4 156.38

242.13 166.50 226.63

87.13

74.00

10.88 42.50 20.50 13.88 22.00 15.34 12.00

51.50 44.88 19.13

56,950 25,550

9.16

20-3/4

3000

20-3/4 143.69 226.812 163.94 223.88

66.13

58.88

12.44 39.52 14.31 10.69 16.28 12.66

8.00

39.88 36.25 17.56

21-1/4

2000

21-1/4 143.69

226.81 163.94 223.88

62.75

58.88

12.44 39.52 12.63 10.69 14.59 12.66

8.00

38.19 36.25 17.56

25,150

21-1/4

5000

21-1/4 164.25

247.25 180.94 239.25

82.38

74.00

12.38 42.50 17.97 17.19 18.72 14.69 13.50

49.03 45.00 17.63

58,000

250.38 181.13 239.50 100.06 87.06

9.44

47.25 24.53 18.03 26.25 19.75 13.50

58.59 52.09 20.56

65,500

275.38

7.44

46.25 17.44

48.00

44,200

21-1/4* 26-3/4

10,000 21-1/4 163.38 3000

26-3/4 169.63

-

-

78.88

-

-

19.91

-

8.00

-

22.56

* Available with stud X flange connection Weights shown are for flange X flange top/bottom

Note: All weights listed are based on utilizing closed die forgings.

TC1001-06

19

© 2006 Cameron International Corporation

TC1001-06

20

© 2006 Cameron International Corporation

7-1/16” 3000 - 7-1/16” 15,000 psi WP U BOP Part Numbers Item No.

Description

Qty Sgl

7-1/16” 3000 psi Model II

Qty Dbl

7-1/16” 5000 psi Model II

7-1/16” 10,000 psi Model II

7-1/16” 15,000 psi Model II

1

Body

1

1

-

-

-

-

2

Intermediate Flange

2

4

030266-03-00-01

030266-03-00-01

030266-01-01

030266-01-01 041499-01

2A

Intermediate Flange/Shear

-

-

041499-03

041499-03

041499-01

3

Bonnet

2

4

030278-04

030278-03

030278-02

030278-01

4

Ram Assembly

2

4

644504-( )

644504-( )

644504-( )

644504-( )

5

Piston, Operating

2

4

236501-15-11-08

236501-15-11-08

236501-15-11-08

236501-15-11-08

Piston, Operating/Shear

-

-

049116-01

049116-01

049116-01

049116-01

Cylinder, Operating

2

4

030274-02

030274-02

030274-02

030274-02

Cylinder, Operating/Shear

-

-

041365-02

041365-02

041365-02

041365-02

7

Housing, Locking Screw

2

4

030308-01

030308-01

030308-01

030308-01

8

Locking Screw

2

4

030326

030326

030326

030326

Locking Screw/Shear

-

-

049258-01

049258-01

049258-01

049258-01

5A 6 6A

8A 9

Piston, Ram Change/Open

2

4

030324

030324

030324

030324

10

Piston, Ram Change/Close

2

4

030325

030325

030325

030325

11

Cylinder, Ram Change

4

8

030273-02

030273-02

030273-02

030273-02

12

Bolt, Bonnet

8

16

030312-06

030312-02

030312-07

030312-01

Bolt, Bonnet/Shear

-

-

041366-06

041366-02

041366-07

041366-22

16

32

219065-10-04-41

219065-10-04-41

219065-10-04-41

219065-10-04-41

-

-

038732-57-00-54

038732-57-00-54

219065-10-05-41

219065-10-05-41 2709000-10-01

12A 13 13A

Stud, Locking Screw Housing Stud, Locking Screw Housing/Shear

14

Nut, Locking Screw Housing

16

32

2709000-10-01

2709000-10-01

2709000-10-01

15

Check Valve, Plastic Packing

2

4

M517988

M517988

M517988

M517988

16

Screw, Plastic Packing

2

4

005940-09

005940-09

005940-09

005940-09

17

Pipe Plug, Plastic Packing

2

4

005930-05-10

005930-05-10

005930-05-10

005930-05-10

18

Ring, Plastic Packing

2

4

2010178-01

2010178-01

2010178-01

2010178-01

19

Ring, Plastic Energizing

2

4

018586-12

018586-12

018586-12

018586-12

20

Seal Ring, Connecting Rod

2

4

212741-37-00-01

212741-37-00-01

212741-37-00-01

212741-37-00-01

21

Ring Back-Up

4

8

-

-

021792-21

021792-21

22

Seal, Bonnet

2

4

644197-01-00-01

644197-01-00-01

644197-01-00-01

644197-01-00-01

23

Pin, Ram Guide

4

8

030313-02

030313-02

030313-02

030313-02

24

O-Ring, Operating Cylinder

4

8

702645-44-61

702645-44-61

702645-44-61

702645-44-61

25

O-Ring, Operating Piston Rod to Int Flg

2

4

018492-92

018492-92

018492-92

018492-92

26

Lip Seal, Operating Piston

2

4

710541

710541

710541

710541

27

Seal Ring, Tail Rod

2

4

212741-32

212741-32

212741-32

212741-32

28

O-Ring, Wiping

2

4

702645-33-11

702645-33-11

702645-33-11

702645-33-11

29

O-Ring, Ram Change Piston to Body

4

8

702645-32-41

702645-32-41

702645-32-41

702645-32-41

30

O-Ring, Ram Change Piston Rod to Int Flg

4

8

702645-32-91

702645-32-91

702645-32-91

702645-32-91

31

O-Ring, Ram Change Cylinder to Int Flg

4

8

702645-33-81

702645-33-81

702645-33-81

702645-33-81

32

O-Ring, Ram Change Cylinder to Bonnet

4

8

702645-34-21

702645-34-21

702645-34-21

702645-34-21

33

O-Ring, Ram Change Piston

4

8

702645-33-21

702645-33-21

702645-33-21

702645-33-21

34

O-Ring, Bonnet Bolt Retainer

8

16

702645-22-31

702645-22-31

702645-22-91

702645-23-21

35

Cap Screw, Int Flange to Bonnet

16

32

702585-22-00-50

702585-22-00-50

702585-22-00-50

702585-22-00-50

36

Gland, Bleeder

2

4

017454-08

017454-08

017454-08

017454-08

37

Plug, Bleeder

2

4

017454-09

017454-09

017454-09

017454-09

38

Lifting Eye

2

2

011849-01

011849-01

011849-01

011849-01

39

Packing, Plastic

10

20

007650-25

007650-25

007650-25

007650-25

40

Washer

2

4

689523-04

689523-04

689523-04

689523-04

41

Ring, Retainer

2

4

018572-83

018572-83

018572-83

018572-83

42

Wear Ring, Operating Piston

2

4

049223-03

049223-03

049223-03

049223-03

43

Spacer, Shear

-

-

687117-01

687117-01

687117-01

687117-01

*

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

21

© 2006 Cameron International Corporation

11” 3000 - 11” 15,000 psi WP U BOP Part Numbers Item No.

Description

Qty Sgl

Qty Dbl

*11” 3000 psi Model II

* 11” 5000 psi Model II

*11” 10,000 psi Model II

*11” 15,000 psi Model 79

1

Body

1

1

-

-

-

-

2

Intermediate Flange

2

4

030267-03

030267-03

030267-03

049391-01

041457-03**

2A

Intermediate Flange/Shear

-

-

041457-03**

041457-03**

3

Bonnet

2

4

030268-01

030268-02

030268-03

031241

4

Ram Assembly

2

4

644219-( )

644219-( )

644219-( )

644222-( )

5

Piston, Operating

2

4

163192-01

163192-01

163192-01

698481

Piston, Operating/Shear

-

-

698914**

698914**

698914**

*

Cylinder, Operating

2

4

030274-03

030274-03

030274-03

030274-01

5A 6 6A 7 8

Cylinder, Operating/Shear

-

-

041365-03**

041365-03**

041365-03**

-

Housing, Locking Screw

2

4

030308-02

030308-02

030308-02

030308-03 030846

Locking Screw

2

4

030365

030365

030365

Locking Screw/Shear

-

-

046628-01

046628-01

046628-01

-

9

Piston, Ram Change/Open

2

4

030362

030362

030362

031239

10

Piston, Ram Change/Close

2

4

030363

030363

030363

031238

11

Cylinder, Ram Change

4

8

030273-03

030273-03

030273-03

030273-01

Bolt, Bonnet

8

16

030312-04

030312-03

030312-05

030312-12

Bolt, Bonnet/Shear

-

-

041366-04

041366-03

041366-05

-

16

32

219065-12-05-01

219065-12-05-01

219065-12-05-01

219065-14-07-51

8A

12 12A 13 13A

Stud, Locking Screw Housing

-

-

219065-12-06-51

219065-12-06-51

219065-12-06-51

-

14

Stud, Locking Screw Housing/Shear Nut, Locking Screw Housing

16

32

2709000-12-01

2709000-12-01

2709000-12-01

2709000-14-01

15

Check Valve, Plastic Packing

2

4

M517988

M517988

M517988

M517988

16

Screw, Plastic Packing

2

4

005940-09

005940-09

005940-09

005940-09

17

Pipe Plug, Plastic Packing

2

4

005930-05-10

005930-05-10

005930-05-10

005930-05-10

18

Ring, Plastic Packing

2

4

2010178-02

2010178-02

2010178-02

012469-24

19

Ring, Plastic Energizing

2

4

018586-13

018586-13

018586-13

018586-13

20

Seal Ring, Connecting Rod

2

4

212741-38-00-01

212741-38-00-01

212741-38-00-01

212741-38-00-01

21

Ring Back-Up

4+

8+

021792-22

021792-22

021792-22

021792-26

22

Seal, Bonnet

2

4

644197-02-00-01

644197-02-00-01

644197-02-00-01

049272-03

23

Pin, Ram Guide

4

8

030313-03

030313-03

030313-03

030313-01

24

O-Ring, Operating Cylinder

4

8

702645-45-11

702645-45-11

702645-45-11

702645-45-51

25

O-Ring, Operating Piston Rod to Int Flg

2

4

018492-91

018492-91

018492-91

018492-90

26

Lip Seal, Operating Piston

2

4

710539

710539

710539

710538

27

Seal Ring, Tail Rod

2

4

212741-33-00-01

212741-33-00-01

212741-33-00-01

212741-34-00-01

28

O-Ring, Wiping

2

4

702645-33-51

702645-33-51

702645-33-51

702645-33-71

29

O-Ring, Ram Change Piston to Body

4

8

702645-32-61

702645-32-61

702645-32-61

702645-32-81

30

O-Ring, Ram Change Piston Rod to Int Flg

4

8

702645-33-11

702645-33-11

702645-33-11

702645-33-31

31

O-Ring, Ram Change Cylinder to Int Flg

4

8

031423-25-13-85

031423-25-13-85

031423-25-13-85

702645-34-61

32

O-Ring, Ram Change Cylinder to Bonnet

4

8

2010180-02

2010180-02

2010180-02

702645-42-51

33

O-Ring, Ram Change Piston

4

8

702645-33-51

702645-33-51

702645-33-51

702645-33-81

34

O-Ring, Bonnet Bolt Retainer

8

16

702645-22-71

702645-22-91

702645-23-41

702645-23-91

35

Cap Screw, Int Flange to Bonnet

16

32

702585-25-00-50

702585-25-00-50

702585-25-00-50

702585-25-00-54

36

Gland, Bleeder

2

4

017454-08

017454-08

017454-08

017454-08

37

Plug, Bleeder

2

4

017454-09

017454-09

017454-09

017454-09

38

Lifting Eye

2

2

011849-01

011849-01

011849-01

011849-01

39

Packing, Plastic

10

20

007650-25

007650-25

007650-25

007650-25

40

Washer

2

4

689523-05

689523-05

689523-05

689523-01

41

Ring, Retainer

2

4

018572-84

018572-84

018572-84

018572-85

42

Wear Ring, Operating Piston

2

4

049223-02

049223-02

049223-02

049223-01

43

Spacer, Shear****

-

-

687117-02

687117-02

687117-02

687117-03

*A large bore shear bonnet is available for these sizes. For part numbers, see page 29. **Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page . ***Required on all 11" 15,000 psi and 16-3/4" 10,000 psi BOP's with manual locking screws. +11" 15,000 psi requires 8 for single and 16 for double. *

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

22

© 2006 Cameron International Corporation

13-5/8" 3000 - 13-5/8” 15,000 psi WP U BOP Part Numbers Item No.

Description

Qty Sgl

Qty Dbl

*13-5/8” 3000 psi Model II

*13-5/8” 5000 psi Model II

*13-5/8” 10,000 psi Model II

*13-5/8” 15,000 psi Model B

1

Body

1

1

-

-

-

-

2

Intermediate Flange

2

4

030270-01-00-02

030270-01-00-02

031216

698899 615538-01

2A

Intermediate Flange/Shear

-

-

686242**

686242**

686767**

3

Bonnet

2

4

030284-02

030284-01

031241

691849

4

Ram Assembly

2

4

644225-( )

644225-( )

644225-( )

644228-( )

5

Piston, Operating

2

4

236501-33-11-08

236501-33-11-08

236501-34-11-03

698996

Piston, Operating/Shear

-

-

687542**

687542**

690791

615539-01

Cylinder, Operating

2

4

030274-01

030274-01

030274-01

030274-06

Cylinder, Operating/Shear

-

-

041365-01**

041365-01**

041365-01**

-

Housing, Locking Screw

2

4

030308-03

030308-03

030308-03

030308-06 695234

5A 6 6A 7 8

Locking Screw

2

4

030307

030307

030307

Locking Screw/Shear

-

-

030846

030846

030846

-

9

Piston, Ram Change/Open

2

4

030310

030310

031239

038847-01

10

Piston, Ram Change/Close

2

4

030309

030309

031238

038848-01

11

Cylinder, Ram Change

4

8

030273-01

030273-01

030273-01

030273-06

12

Bolt, Bonnet

8

16

030312-09

030312-01

2010181-06-01

030312-25

12A Bolt, Bonnet/Shear

-

-

041366-09

041366-01

041366-12

-

16

32

005918-76-10

005918-76-10

005918-76-10

219065-14-07-51

8A

13

Stud, Locking Screw Housing

13A Stud, Locking Screw Housing/Shear

-

-

219065-14-07-51

219065-14-07-51

219065-14-07-51

-

14

Nut, Locking Screw Housing

16

32

2709000-14-01

2709000-14-01

2709000-14-01

2709000-14-01

15

Check Valve, Plastic Packing

2

4

M517988

M517988

M517988

M517988

16

Screw, Plastic Packing

2

4

005940-09

005940-09

005940-09

005940-09

17

Pipe Plug, Plastic Packing

2

4

005930-05-10

005930-05-10

005930-05-10

005930-05-10

18

Ring, Plastic Packing

2

4

012469-24

012469-24

012469-24

012469-24

19

Ring, Plastic Energizing

2

4

018586-01

018586-01

018586-01

018586-01

20

Seal Ring, Connecting Rod

2

4

212741-36-00-01

212741-36-00-01

212741-36-00-01

212741-36-00-01

21

Ring Back-Up

4

8

-

-

021792-26

021792-26

22

Seal, Bonnet

2

4

644197-03-00-01

644197-03-00-01

644197-03-00-01

644196-01-00-01

23

Pin, Ram Guide

4

8

030313-01

030313-01

030313-01

030313-08

24

O-Ring, Operating Cylinder

4

8

702645-45-51

702645-45-51

702645-45-51

702645-46-11

25

O-Ring, Operating Piston Rod to Int Flg

2

4

018492-90

018492-90

018492-90

018492-90

26

Lip Seal, Operating Piston

2

4

710538

710538

710538

710542

27

Seal Ring, Tail Rod

2

4

212741-34-00-01

212741-34-00-01

212741-34-00-01

212741-45

28

O-Ring, Wiping

2

4

702645-33-71

702645-33-71

702645-33-71

702645-34-21

29

O-Ring, Ram Change Piston to Body

4

8

702645-32-81

702645-32-81

702645-32-81

702645-33-21

30

O-Ring, Ram Change Piston Rod to Int Flg

4

8

702645-33-31

702645-33-31

702645-33-31

031423-21-13-85

31

O-Ring, Ram Change Cylinder to Int Flg

4

8

702645-34-61

702645-34-61

702645-34-61

702645-35-41

32

O-Ring, Ram Change Cylinder to Bonnet

4

8

702645-42-51

702645-42-51

702645-42-51

702645-43-41

33

O-Ring, Ram Change Piston

4

8

702645-33-81

702645-33-81

702645-33-81

702645-34-41

34

O-Ring, Bonnet Bolt Retainer

8

16

702645-23-11

702645-23-21

702645-23-91

702645-24-51

35

Cap Screw, Int Flange to Bonnet

16***

32***

702585-25-00-44

702585-25-00-44

702585-25-00-54

702585-31-00-54

36

Gland, Bleeder

2

4

017454-08

017454-08

017454-08

017454-08

37

Plug, Bleeder

2

4

017454-09

017454-09

017454-09

017454-09

38

Lifting Eye

2

2

011849-01

011849-01

011849-01

011849-01

39

Packing, Plastic

10

20

007650-25

007650-25

007650-25

007650-25

40

Washer

2

4

689523-01

689523-01

689523-01

689523-01

41

Ring, Retainer

2

4

018572-85

018572-85

018572-85

018572-85

42

Wear Ring, Operating Piston

2

4

049223-01

049223-01

049223-01

049223-04

43

Spacer, Shear

-

-

687117-03

687117-03

687117-03

687117-05

****A large bore shear bonnet is available for these sizes. For part numbers, see page 29. ****Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page . ****13-5/8” through 16-3/4” and 20-3/4” through 26-3/4” require 24 for single and 48 for double. The 18-3/4” requires 32 for single and 64 double.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

23

© 2006 Cameron International Corporation

16-3/4” 3000 - 18-3/4” 10,000 psi WP U BOP Part Numbers Item No.

Description

Qty Sgl

Qty Dbl

* 16-3/4” 3000 psi Model B

*16-3/4” 5000 psi Model B

*16-3/4” 10,000 psi Model II

18-3/4” 10,000 psi Model II

1

Body

1

1

-

-

-

-

2

Intermediate Flange

2

4

038944

038844

691848

041458 041459

2A

Intermediate Flange/Shear

-

-

-

041408

3

Bonnet

2

4

038843-02

038843-01

691849

4

Ram Assembly

2

4

644231-( )

644231-( )

644231-( )

644234-( )

5

Piston, Operating

2

4

614374-01

689562

692828

236501-54-11-03

5A 6 6A 7 8

-

Piston, Operating/Shear

-

-

-

694085**

615536-01

-

Cylinder, Operating

2

4

030274-06

030274-06

041365-06

030274-13

Cylinder, Operating/Shear

-

-

-

041365-06**

-

-

Housing, Locking Screw

2

4

030308-06

030308-06

030308-06

030308-09 041085

Locking Screw

2

4

038901

038901

695234

Locking Screw/Shear

-

-

-

695234

-

-

9

Piston, Ram Change/Open

2

4

038946

038847-01

692756

040961

10

Piston, Ram Change/Close

2

4

038947

038848-01

692759

040960

11

Cylinder, Ram Change

4

8

030273-07

030273-06

030273-13

030273-09

12

Bolt, Bonnet

8

16

030312-17

030312-16

030312-24

030312-23

12A Bolt, Bonnet/Shear

-

-

-

041366-16

-

-

16

32

005918-78-10

219065-14-04-71

219065-14-06-01

005919-38-10

8A

13

Stud, Locking Screw Housing

13A Stud, Locking Screw Housing/Shear

-

-

-

005918-34-10

-

-

14

Nut, Locking Screw Housing

16

32

2709000-14-01

2709000-14-01

2709000-14-01

2709000-18-01

15

Check Valve, Plastic Packing

2

4

M517988

M517988

M517988

M517988

16

Screw, Plastic Packing

2

4

005940-09

005940-09

005940-09

005940-09

17

Pipe Plug, Plastic Packing

2

4

005930-05-10

005930-05-10

005930-05-10

005930-05-10

18

Ring, Plastic Packing

2

4

012469-52

012469-52

012469-52

012469-72

19

Ring, Plastic Energizing

2

4

018586-14

018586-14

018586-14

018586-19

20

Seal Ring, Connecting Rod

2

4

212741-44-00-01

212741-44-00-01

212741-44-00-01

212741-60

21

Ring Back-Up

4

8

-

-

021792-34

021793-40 †

22

Seal, Bonnet

2

4

644197-04-00-01

644197-04-00-01

644197-04-00-01

644197-05-00-01

23

Pin, Ram Guide

4

8

030313-06

030313-06

030313-06

030313-07

24

O-Ring, Operating Cylinder

4

8

702645-46-11

702645-46-11

702645-46-11

702645-46-91

25

O-Ring, Operating Piston Rod to Int Flg

2

4

2708811-01

2708811-01

2708811-01

041602-04-13-85

26

Lip Seal, Operating Piston

2

4

710542

710542

710542

710543

27

Seal Ring, Tail Rod

2

4

212741-45

212741-45

212741-45

212741-36-00-01

28

O-Ring, Wiping

2

4

702645-34-21

702645-34-21

702645-34-21

702645-34-51

29

O-Ring, Ram Change Piston to Body

4

8

702645-33-21

702645-33-21

702645-33-21

702645-34-01

30

O-Ring, Ram Change Piston Rod to Int Flg

4

8

031423-21-13-85

031423-21-13-85

031423-21-13-85

2010180-02

31

O-Ring, Ram Change Cylinder to Int Flg

4

8

702645-35-41

702645-35-41

702645-35-41

702645-43-51

32

O-Ring, Ram Change Cylinder to Bonnet

4

8

702645-43-41

702645-43-41

702645-43-41

702645-43-81

33

O-Ring, Ram Change Piston

4

8

702645-34-41

702645-34-41

702645-34-41

030101-83-13-85

34

O-Ring, Bonnet Bolt Retainer

35

Cap Screw, Int Flange to Bonnet

36 37

8

16

702645-23-21

702645-23-71

702645-24-51

702645-24-71

16***

32***

702585-31-00-44

702585-31-00-54

702585-31-00-72

702585-36-00-76

Gland, Bleeder

2

4

017454-08

017454-08

017454-08

017454-08

Plug, Bleeder

2

4

017454-09

017454-09

017454-09

017454-09

38

Lifting Eye

2

2

011849-01

011849-01

011849-01

011849-01

39

Packing, Plastic

10

20

007650-25

007650-25

007650-25

007650-25

40

Washer

2

4

689523-02

689523-02

689523-02

689523-03

41

Ring, Retainer

2

4

033186-85

033186-85

033186-35

033186-01-04

42

Wear Ring, Operating Piston

2

4

049223-04

049223-04

049223-04

049223-07

43

Spacer, Shear

-

-

-

687117-05

687117-05

-

****A large bore shear bonnet is available for these sizes. For part numbers, see page 29. ****13-5/8” through 16-3/4” and 20-3/4” through 26-3/4” require 24 for single and 48 for double. The 18-3/4” requires 32 for single and 64 double. ****Required on all 11" 15,000 psi and 16-3/4" 10,000 psi BOP's with manual locking screws.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

24

© 2006 Cameron International Corporation

20-3/4” 3000 - 26-3/4” 3000 psi WP U BOP Part Numbers Item No.

Description

Qty Sgl

Qty Dbl

*20-3/4” 3000 psi Model II

* 21-1/4” 2000 psi Model II

21-1/4” 5000 psi Model II

21-1/4” 10,000 psi Model II

26-3/4” 3000 psi Model II

1

Body

1

1

-

-

-

-

-

2

Intermediate Flange

2

4

236499-71-11-03

030911-01

-

615369-01

038327

2A

Intermediate Flange/Shear

-

-

041496-01**

041496-01**

049955-01

615418-01

3

Bonnet

2

4

030835-01

030835-02

049963-01

041357

038326

4

Ram Assembly

2

4

044256-( )

044256-( )

044262-( )

044262-( )

044260-( )

5

Piston, Operating

2

4

236501-71-11-03

690058-03

049954-01

041356

614376-01

Piston, Operating/Shear

-

-

693405**

693405**

-

041374**

-

Cylinder, Operating

2

4

030274-04

030274-04

030274-11

030274-11

030274-05

5A 6 6A 7 8

Cylinder, Operating/Shear

-

-

041365-04**

041365-04**

-

041365-11**

-

Housing, Locking Screw

2

4

030308-04

030308-04

030308-08

030308-08

030308-05 034233

Locking Screw

2

4

030846

030846

041085

041085

Locking Screw/Shear

-

-

034233

034233

-

-

-

9

Piston, Ram Change/Open

2

4

030848

030848

041064

041064

038174

10

Piston, Ram Change/Close

2

4

030849

030849

041065

041065

038324

11

Cylinder, Ram Change

4

8

030273-04

030273-04

030273-11

030273-11

030273-05

12

Bolt, Bonnet

8

16

030312-10

030312-11

030312-26

030312-21

030312-13

12A Bolt, Bonnet/Shear

-

-

041366-10

041366-11

-

041366-21

-

16

32

219065-14-06-01 219065-14-06-01

005919-38-10

005919-38-10

219065-14-06-01

219065-14-07-51 219065-14-07-51

8A

13

Stud, Locking Screw Housing

13A Stud, Locking Screw Housing/Shear

-

-

14

Nut, Locking Screw Housing

16

32

15

Check Valve, Plastic Packing

2

4

M517988

M517988

M517988

M517988

M517988

16

Screw, Plastic Packing

2

4

005940-09

005940-09

005940-09

005940-09

005940-09

17

Pipe Plug, Plastic Packing

2

4

005930-05-10

005930-05-10

005930-05-10

005930-05-10

005930-05-10

18

Ring, Plastic Packing

2

4

012469-24

012469-24

012469-70

012469-70

012469-24

19

Ring, Plastic Energizing

2

4

018586-01

018586-01

018586-18

018586-18

20

Seal Ring, Connecting Rod

2

4

21

Ring Back-Up

4

8

22

Seal, Bonnet

2

4

23

Pin, Ram Guide

4

8

030313-04

030313-04

030313-07

030313-07

030313-05

24

O-Ring, Operating Cylinder

4

8

702645-45-51

702645-45-51

702645-46-91

702645-46-91

702645-45-51

25

O-Ring, Operating Piston Rod to Int Flg

2

4

018492-90

018492-90

26

Lip Seal, Operating Piston

2

4

710538

710538

27

Seal Ring, Tail Rod

2

4

28

O-Ring, Wiping

2

4

702645-33-71

702645-33-71

702645-34-51

702645-34-51

702645-33-71

29

O-Ring, Ram Change Piston to Body

4

8

702645-33-61

702645-33-61

702645-34-31

702645-34-31

702645-34-41

30

O-Ring, Ram Change Piston Rod to Int Flg

4

8

702645-34-11

702645-34-11

702645-35-11

702645-35-11

702645-34-91

31

O-Ring, Ram Change Cylinder to Int Flg

4

8

702645-43-71

702645-43-71

702645-44-01

702645-44-01

702645-43-91

32

O-Ring, Ram Change Cylinder to Bonnet

4

8

702645-43-91

702645-43-91

702645-44-21

702645-44-21

702645-44-11

33

O-Ring, Ram Change Piston

4

8

702645-42-51

702645-42-51

702645-43-11

702645-43-11

702645-42-91

34

O-Ring, Bonnet Bolt Retainer

8

16

702645-22-91

702645-22-71

702645-24-71

702645-24-81

35

Cap Screw, Int Flange to Bonnet

36

Gland, Bleeder

2

4

017454-08

017454-08

017454-08

017454-08

017454-08

37

Plug, Bleeder

2

4

017454-09

017454-09

017454-09

017454-09

017454-09

38

Lifting Eye

2

2

011849-01

011849-01

011849-01

011849-01

011849-01

39

Packing, Plastic

10

20

007650-25

007650-25

007650-25

007650-25

007650-25

40

Washer

2

4

689523-01

689523-01

002353-46

002353-46

689523-01

41

Ring, Retainer

2

4

018572-85

018572-85

033186-92

033186-92

018572-85

42

Wear Ring, Operating Piston

2

4

049223-10

049223-10

049223-11

049223-08

049223-10

43

Spacer, Shear

-

-

687117-03

687117-03

-

-

-

2709000-14-01

2709000-14-01

-

-

-

2709000-18-01

2709000-18-01

2709000-14-01

212741-36-00-01 212741-36-00-01 011741-58-00-01 011741-58-00-01 -

-

021793-39

021793-39

046613-16-00-01 046613-16-00-01 644197-08-00-01 644197-08-00-01

030101-88-13-85 030101-88-13-85 710544

018586-01 212741-36-00-01 644197-09-00-01

018492-90

710544

212741-34-00-01 212741-34-00-01 212741-36-00-01 212741-36-00-01

16*** 32*** 702585-28-00-50 702585-28-00-50 702585-36-00-93 702585-36-00-93

710538 212741-34-00-01

702645-23-91 702585-31-00-70

****A large bore shear bonnet is available for these sizes. For part numbers, see page 29. ****Part numbers shown are for old style shear bonnets. For current model large bore shear bonnet part numbers, see page . ****13-5/8” through 16-3/4” and 20-3/4” through 26-3/4” require 24 for single and 48 for double. The 18-3/4” requires 32 for single and 64 double.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

25

© 2006 Cameron International Corporation

Bonnet Rebuild Softgoods Kits For popular size U BOPs, a bonnet rebuild softgoods kit is available to provide all parts required to reseal the operating system. Kit parts are shrink-film packed to prevent loss and assure long shelf life. The kits are less expensive than individual parts. All parts in each kit are identified with part numbers and parts list index numbers.

24 42 28 34

26

29

24

32

30

31

27 33

18

21

25

19

20

U BOP Bonnet Softgoods Components SD 017515 If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

26

© 2006 Cameron International Corporation

U BOP Bonnet Rebuild Softgoods Kit Components Item Number*

Description

18

Ring, Plastic Packing

19

Ring, Plastic Energizing

20

Seal Ring, Connecting Rod

21

Ring, Backup

24

O-Ring, Operating Cylinder

25

O-Ring, Operating Piston Rod to Intermediate Flange

26

Lip Seal, Operating Piston

27

Seal Ring, Tail Rod

28

O-Ring, Wiping

29

O-Ring, Ram Change Piston to Body

30

O-Ring, Ram Change Piston Rod to Intermediate Flange

31

O-Ring, Ram Change Cylinder to Intermediate Flange

32

O-Ring, Ram Change Piston to Bonnet

33

O-Ring, Ram Change Piston

34

O-Ring, Bonnet Bolt Retainer

39

Packing, Plastic**

42

Wear Ring, Operating Piston

44

O-Ring (not shown)

Kit Part Numbers BOP Size (in.) 7-1/16

Pressure Rating/Bonnet Type

Kit Part Number*

3000, 5000, 10,000 and 15,000 psi All**

644909-01

11

3000, 5000, and 10,000 psi Pipe**

644909-02

11

15,000 psi All

644831-08

13-5/8

3000, 5000, and 10,000 psi Pipe**

644909-03

13-5/8

15,000 psi All

644831-12

16-3/4"

3000 psi All

644831-13

16-3/4

5000 psi Pipe

644831-14

16-3/4

10,000 psi All

644831-15

18-3/4

10,000 psi All

644909-04

20-3/4

3000 psi Pipe

644831-17

21-1/4

2000 psi Pipe or Shear**

644831-18

21-1/4

5000 psi All

644831-19

21-1/4

7500 psi All

644381-20

21-1/4

10,000 psi Pipe or Shear

644831-21

*One kit contains softgoods for one bonnet. **Except Large Bore Shear Bonnets TC1001-06

27

© 2006 Cameron International Corporation

26-3/4

644831-22

3000 psi All

Drill Pipe Shearing Requirements The minimum shearing configurations needed for each size U BOP to meet the requirements of the second edition of API 16A are listed in the following chart. Each shearing configuration is capable of shearing the corresponding pipe at a closing pressure equal to or less than 2800 psi. For further information on shearing requirements for different pipe sizes and grades, please refer to EB702D or contact your Cameron representative. API Designated Size

Ram Type

7-1/16”

SBR

All

3-1/2

13.3

S

Shear Bonnets with Tandem Boosters

7-1/16"

DSI

All

3-1/2

13.3

S

Shear Bonnets with Tandem Boosters

11”

SBR

10,000 and Lower

5

19.5

E

Large Bore Shear Bonnets with Tandem Boosters

11”

DS/ISR

10,000 and Lower

5

19.5

E

Large Bore Shear Bonnets with Tandem Boosters

11”

SBR

15,000 and Higher

5

19.5

G

Large Bore Shear Bonnets with Tandem Boosters

13-5/8”

SBR

10,000 and Lower

5

19.5

G

Shear Bonnets with Tandem Boosters

13-5/8”

DS/ISR

10,000 and Lower

5

19.5

G

Large Bore Shear Bonnets

13-5/8”

SBR

15,000 and Higher

5

19.5

S

Large Bore Shear Bonnets

16-3/4”

SBR

All

5

19.5

S

Large Bore Shear Bonnets

18-3/4”

SBR

All

5

19.5

S

Standard Bonnets

20-3/4”

SBR

3000 and Lower

5

19.5

G

Shear Bonnets with Tandem Boosters

21-1/4”

SBR

3000 and Lower

5

19.5

G

Shear Bonnets with Tandem Boosters

21-1/4”

SBR

5000 and Higher

5

19.5

S

Standard Bonnets

21-1/4

SBR

10,000 and Higher

5

19.5

G

Standard Bonnets

Pressure Rating (psi)

Pipe OD (In.)

Pipe lb/ft

Pipe Grade

Shearing Configuration

U BOP Lifting Plates BOP Size (in.) 7-1/16 11 11 13-5/8 13-5/8 16-3/4 16-3/4 16-3/4 18-3/4 18-3/4 20-3/4 20-3/4 21-1/4 21-1/4 21-1/4 21-1/4 21-1/4

TC1001-06

Pressure Rating 3000, 5000, 10,000 and 15,000 psi 3000, 5000 and 10,000 psi 15,000 psi 3000, 5000, 10,000 and 15,000 psi 3000, 5000 10,000 and 15,000 psi 3000 and 5000 psi 10,000 psi 3000, 5000 and 10,000 psi 10,000 psi 10,000 psi 3000 psi 3000 psi 2000 psi 2000 psi 5000 psi 5000 psi 5000 and 10,000 psi (Special)

28

Lifting Plate Assy 644930-07 644930-03 644930-02 644930-01 644930-05 644930-04 644930-01 644930-05 644930-06 2011800-01 644930-01 644930-05 644930-01 644930-05 644930-06 2011800-01 644852-03

Rating (Tons) 60 50 50 50 120 50 50 120 100 100 50 120 50 120 100 100 180

© 2006 Cameron International Corporation

Large Bore Shear Bonnets

12A**

2A

24A 42A

5A

26A Large Bore Shear Ram Bonnet Assembly

3A

Item No.

Description (2 Required per Cavity)

SD-017503

11” 3000 psi Model II

11” 5000 psi Model II

11” 10,000 psi Model II

11” 15,000 psi Model 79

13-5/8” 3000 psi Model 11

13-5/8” 5000 psi Model II

*

Bonnet Assembly (Right)

615195-01

615194-01-00-01

614596-01-00-02

615419-01

615196-01

615191-01-00-01

*

Bonnet Assembly (Left)

615195-02

615194-02-00-01

614596-02-00-02

615419-02

615196-02

615191-01-00-01

2A

Intermediate Flange/Shear

615188-01

615188-01

615188-01

615459-01

615192-01

615192-01-00-01

3A

Bonnet/Shear

615189-03

615189-02

615189-01

615640-01

615143-02

615143-01

5A

Operating Piston/Shear

615190-02-00-01

615190-02-00-01

615190-02-00-01

615457-01

615209-01

615209-01

24A

O-Ring, Int Flg to Bonnet Lip

702645-45-51

702645-45-51

702645-45-51

702645-45-81

702645-45-81

702645-45-81

26A

Lip Seal, Operating Piston/Shear

710586

710586

710586

710542

710542

710542

42A

Wear Ring, Operating Piston/Shear

049223-15

049223-15

049223-15

049223-04

049223-04

049223-04

Item No.

Description (2 Required per Cavity)

13-5/8” 10,000 psi Model II

13-5/8” 15,000 psi Model B

16-3/4” 5000 psi Model B

16-3/4” 10,000 psi Model II

20-3/4” 3000 psi Model II

21-1/4” 2000 psi Model II

614498-01-00-02

615540-01

615530-01

615537-01

615526-01

615525-01

614498-02

615540-02

615530-02

615537-02

615526-02

615525-02

614766-01-00-02

615538-01

615528-01

615535-01

615523-01

615523-01

*

Bonnet Assembly (Right)

*

Bonnet Assembly (Left)

2A

Intermediate Flange/Shear

3A

Bonnet/Shear

5A

Operating Piston/Shear

24A

O-Ring, Int Flg to Bonnet Lip

26A

Lip Seal, Operating Piston/Shear

42A

Wear Ring, Operating Piston/Shear

614772-01

615448-01

615527-01

615534-01

615522-01

615522-02

614760-01-00-02

615539-01

615529-01

615536-01

615524-01

615524-01

702645-45-81

702645-46-51

702645-46-51

702645-46-51

702645-45-81

702645-45-81

710542

710588

710588

710588

710542

710542

049223-04

049223-17

049223-17

049223-17

049223-14

049223-14

**Two shear bonnet assemblies, one right and one left, are required per cavity. The shear bonnet assembly consists of all items shown on the illustration. **See pages 22, 23, 24 and 25 for bonnet bolt part numbers.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

29

© 2006 Cameron International Corporation

U BOP Large Bore Shear Bonnet Rebuild Softgoods Kit Components Description

Item Number 18

Ring, Plastic Packing

19

Ring, Plastic Energizing

20

Seal Ring, Connecting Rod

21*

Ring, Backup

24

O-Ring, Intermediate Flange to Bonnet

25

O-Ring, Operating Piston Rod to Intermediate Flange

26

Lip Seal, Operating Piston

27

Seal Ring, Tail Rod

28

O-Ring, Wiping/Ram Change Piston

29

O-Ring, Ram Change Piston to Body

30

O-Ring, Ram Change Piston Rod to Intermediate Flange

31

O-Ring, Ram Change Cylinder to Intermediate Flange

32

O-Ring, Ram Change Cylinder to Bonnet Bolt Retainer

33

O-Ring, Ram Change Piston

34

O-Ring

39

Packing, Plastic

42

Wear Ring, Operating Piston

*Not used in some sizes

Large Bore Shear Bonnet Softgoods Kit Part Numbers BOP Size (in.)

Pressure Rating

Kit Part Number*

11

3000

644860-01

11

5000

644860-02

11

10,000

644860-03

11

15,000

644860-04

13-5/8

3000

644860-05

13-5/8

5000

644860-06

13-5/8

10,000

644860-07

13-5/8

15,000

644860-08

16-3/4

5000

644860-09

16-3/4

10,000

644860-10

20-3/4

3000

644860-11

21-1/4

2000

644860-11

*One kit contains softgoods for one bonnet.

TC1001-06

30

© 2006 Cameron International Corporation

Tandem Boosters for U BOPs A BOP equipped with tandem boosters can deliver increased shearing force while not increasing the wear and tear on the packers. Tandem boosters approximately double the force available to shear pipe. Since the tailrod of the tandem booster has the same stroke as the BOP’s operating piston, the standard shear locking mechanism can be installed on the outside end of the booster. For information on lock screws and the required spacers, see pages 17, 19 and 21. For information concerning applications where a tandem booster is required, please refer to EB702D or consult your local Cameron representative. 7

17 9 12

11

10

4 16

13

2 5 6 1 8 15

14

3

Tandem Booster Assembly

23

Item No.

Description

SD-017504

7-1/16” 3000, 5000, 10,000 and 15,000 psi* Qty

Part Number 645414-01

Qty

Part Number

1

Qty

Part Number

Tandem Booster Assembly

1

Cylinder

2

644959-01

2

645113-01

2

645113-04

2

Cylinder Head

2

645413-01

2

645171-01

2

645171-03

3

Piston

2

644961-01

2

2032370-02

2

645172-03

4

Tailrod

2

644962-01

2

645173-01

2

645173-04

5

Adapter Plate

2

644963-01

2

645115-01

2

645115-03

6

Screw, SDC HD Cap

16

018541-34

16

018542-13

16

K250405

7

O-Ring

2

702645-24-91

2

702645-36-11

2

702645-37-11

8

Seal Ring

2

710541

2

712352

2

710538

9

Wear Ring, Operating Piston

2

049223-03

2

049223-21

2

049223-01

10

Filter, Muffler

2

710621

2

710621

2

710417

11

Seal, Lip

2

212741-32

2

212741-33-00-01

2

12

Seal Ring

2

710620

2

712351

2

710419

13

Wear Ring, Cylinder

2

644443-02

2

644443-03

2

645215-01

14

Seal Ring

2

705955

2

712445

2

710418

15

O-Ring

2

702645-33-11

2

702645-33-51

2

702645-33-71

16

Alignment Ring

2

645116-02

2

645116-01

2

645116-03

17

Pipe Plug

2

201018

2

201018

2

005930-05-10

18

Connector, Tubing

1

675029-09

-

19

Cross

1

006347-08

1

675029-52

2

20

Nipple, Pipe Regular

1

685904-06-00-30

1

685902-07-00-30

1

21

Hose Assembly

2

2708020

2

2708021

2

22

Connector, Tubing

2

678046-17

2

204887-10-05-56

-

-

23

Stud, Double End

16

219065-10-04-41

16

219065-12-05-01

-

-

24

Connector, Tubing

1

204888-08-05-56

-

-

-

-

25

Nipple, Pipe

1

685902-06-01

-

-

-

-

26

Connector, Tubing

1

675027-65

2

204887-10-06-56

-

27

Adapter, Pipe

-

-

2

675029-01

-

2164148-01

645219-01

20-3/4” 3000 psi and 21-1/4” 2000 psi

**

Repair Kit

1

11’ 3000, 5000, and 10,000 psi

-

1

4

2164148-03

645251-01

212741-34-00-01

204887-10-06-57 675029-23 685902-07-00-30 711374

2164148-02

*The 7-1/16” tandem booster is a part of the standard land and platform shear configuration for 7-1/16” U BOPs. **One assembly includes two tandem boosters.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

31

© 2006 Cameron International Corporation

Tandem Boosters for U BOPs 8 24 4

9 10

12 13 6

SD 034591

5 23 7 11 3 14 15 2 16 17 1

Item Number

Description

11” 15,000 psi 13-5/8” 3000, 5000 and 10,000 psi

Qty

**

Tandem Booster Assembly

1

2010886-01

1

Adapter Plate

2

2010885-01

2

Pipe Plug

2

2010881-01

3

Cylinder

2

2010884-01

4

Cylinder Head

2

2010882-01

5

Tail Rod

2

2010880-01

6

Piston

2

645172-03

7

Screw Cap

16

702585-31-00-30

8

Screw Cap

12

702585-34-01-64

9

O-Ring

2

702645-33-71

10

Seal, Lip

2

212741-34-00-01

11

O-Ring

2

702645-38-12

12

Seal Ring

2

710418

13

Wear Ring

2

645215-01

14

Wear Ring

2

049223-01

15

Seal Ring

2

704772

16

Filter, Quiet Muffler

2

2724042

17

Stud, Double Ended

2

702533-09-10-22

18

Connector, Tubing

2

204887-10-06-57

19

Cross

1

675029-23

20

Nipple, Pipe

1

685902-07-00-30

21

Hose Assembly

2

2724538

22

Connector, Tubing

2

-

23

Gland, Tubing

2

017454-08

24

Blind Plug

2

017454-09

25

Elbow

2

714407

26

Pipe Plug

2

002504-28

-

Repair Kit

-

2164148-02

**One assembly includes two tandem boosters.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

32

© 2006 Cameron International Corporation

UM BOPs The Cameron type UM BOP is a lightweight blowout preventer designed for easy maintenance and long life. The UM compliments the existing line of U preventers with interchangeable bonnets that can be installed on any comparable size type U BOP. The shearing capabilities of the UM BOP bonnet is achieved by simply reversing the operating piston. The UM features a patented, reversible piston that converts standard pipe ram operating pistons to a larger piston designed for shearing. This feature reduces weight and length for the preventer and eliminates the need for external plumbing. The UM replaces the UL since the UM bonnet features full stroke operation that allows for one-step ram removal. For individual Cameron Ram BOP shearing characteristics, including the UM BOP, refer to Engineering Bulletins EB571D, EB685D, EB691D and EB702D. Other features of the UM BOP include:

• Bonnet seal carrier is available to eliminate the need for high makeup torque on bonnet studs and nuts.

• Same bonnet used for both shear and pipe rams. The internal shear booster can be reversed to act as a stroke-limiting device

• Internal reversible piston provides additional force necessary for shearing a wide variety of pipe and at the same time provides a reduced sealing force for long ram seal life.

• Hydraulically operated locking mechanisms, wedgelocks are available for subsea applications. • Most operating system seals can be replaced with the bonnet in the ram-change position without removing the bonnets. • UM utilizes the same rams as the U BOP. Other features include hydraulically opening bonnets, forged body and bonnet construction with a wide section of rams to meet all applications.

UM Blowout Preventer SD 034595

TC1001-06

33

© 2006 Cameron International Corporation

Standard

Tandem

Pipe Bonnet

Pipe Bonnet

Close Pressure

Open Pressure

Close Pressure

Shear Bonnet

Open Pressure

Shear Bonnet

UM BOP Open and Close Hydraulics (13-5/8” 10,000 Shown) SD 034582 TC1001-06

34

© 2006 Cameron International Corporation

UM BOP Operating Data and Fluid Requirements

Closing Ratio

Opening Ratio

Gals to Close Tandem Booster (1 Set)

18

11.7:1

3.8:1

1.5

3.8:1

113.8

27

13.7:1

3.7:1

5.3

3.7:1

7.3

110.2

32

8.8:1

6.9:1

5.4

6.9:1

8.8

110.15

32

8.7:1

2.3:1

6

2.3:1

Bore Size and Working Pressure

Gals to Open Pipe Rams (1 set)

Gals to Close Pipe Rams (1 set)

Gals to Close Shear Rams (1 set)

7-1/16” All WP

2.2

2.3

2.4

67.3

11” Except 15,000 psi

6.2

6.2

7.4

11” 15,000 psi

7.3

7.3

13-5/8” Except 15,000 psi

7.5

7.5

TC1001-06

Closing Locking Screw Area Turns (Sq. inches) (Each End)

35

Tandem Booster Closing Area (Sq. Inches)

© 2006 Cameron International Corporation

TC1001-06

36

© 2006 Cameron International Corporation

UM BOP Specifications and Dimensions The capital letters in the following designations refer to the UM BOP dimensional views and dimensional chart shown below . A-1 Length - bonnets closed, locking screws locked A-2 Length - bonnets opened, locking screws unlocked B-1 Height - flanged B-2 Height - studded C Width - no side outlets D Centerline of preventer to outlet flange or hub face. This distance is variable and must be determined per individual specifications. E Centerline of side outlet to bottom flange face F Top of ram to top flange face G Height of ram

A

C

D

F

G B E

SD 034610

Single Open-Face Flange or Studded UM BOP Dimensions E

F

G

Approx. Weight (lb.) FlgXFlg

Approx. Weight (lb.) StdXStd

Approx. Weight (lb.) FlgXStd

20.250”

8.750”

7.844”

5.50”

2600

2354

2477

20.250”

10.406”

9.625”

5.50”

2652

2302

2477

23.53"

20.625”

11.062”

12.031”

5.50”

3275

2375

2825

31.812”

23.79"

20.625”

11.688”

12.656”

5.50”

3525

2125

2825

35.688”

26.94"

25.750”

13.125”

13.844”

6.75”

6400

5400

5900 15,414

Size

Pressure Rating (psi)

Vertical Bore (in)

A-1

A-2

B-1

B-2

C

7-1/16”

3000

7-1/16

78.250”

116.500”

24.062”

18.38"

7-1/16”

5000

7-1/16

78.250”

116.500”

27.500”

19.75"

7-1/16”

10,000

7-1/16

78.250”

116.500”

30.562”

7-1/16”

15,000

7-1/16

78.250”

116.500”

11”

10,000

11

96.250”

146.875”

130.75"

11"

15,000

11

197.00"

46.26"

32.25"

30.500"

17.100"

17.48"

9.25"

15,899

14,929

13-5/8"

5000

13-5/8

134.500" 201.000"

34.32"

25.82"

29.00"

12.23"

13.34"

7.50"

9,855

8,565

9,210

13-5/8”

10,000

13-5/8

134.500” 201.000”

41.688”

30.88"

30.250”

15.125”

17.094”

7.50”

10,300

9,760

10,030

TC1001-06

37

© 2006 Cameron International Corporation

UM BOP Specifications and Dimensions The capital letters in the following designations refer to the UM BOP dimensional views and dimensional chart shown below. A-1 Length - bonnets closed, locking screws locked A-2 Length - bonnets opened, locking screws unlocked B-1 Height - flanged B-2 Height - studded B*** Height - with 30” spacer C Width - no side outlets D Centerline of preventer to outlet flange or hub face. This distance is variable and must be determined per individual specifications. E Centerline of side outlet below rams to bottom flange face F Top of upper ram to top flange face G Height of ram H Centerline of side outlet between rams to bottom flange face J Top of lower ram to bottom of upper ram A

C

D

F

G

J

B

E

H SD 034560

Double Open-Face Flange or Studded UM BOP Dimensions Size

Pressur e Rating (psi)

Vertical Bore (in.)

7-1/16”

3000

7-1/16

7-1/16”

5000

7-1/16

7-1/16”

10,000

7-1/16”

A-1

B-2

C

B-1

78.250” 116.500” 41.000”

32.12"

78.250” 116.500” 44.188”

33.50"

7-1/16

78.250” 116.500” 48.625”

15,000

7-1/16

11”

10,000

11

Approx. Approx. Approx. Weight Weight Weight (lb.)FlgX (lb.)StdX (lb.)FlgX Std Flg Std

E

F

G

H

J

20.250”

8.750”

7.844”

5.50”

25.688”

11.438”

5100

4950

5025

20.250”

10.406”

9.625”

5.50”

27.094”

11.188”

4904

4729

4817

39.12"

20.625”

11.062”

12.031”

5.50”

29.125”

12.562”

5850

5500

5675

78.250” 116.500” 49.875”

41.86"

20.625”

11.688”

12.656”

5.50”

29.750”

12.562”

6100

5500

5800

96.250” 146.875” 55.875”

47.12"

25.750”

13.125”

13.844”

6.75”

33.312”

13.438”

11,300

11,300

12,250

11"

15,000

11

197.00"

65.20"

53.25"

30.500"

17.10"

17.48"

9.25"

37.35"

11.75"

23,180

20,190

22,000

13-5/8"

5000

13-5/8

134.500" 201.000"

53.52"

44.82"

29.000"

12.23"

13.34"

7.50"

30.48"

11.50"

19,425

18,075

18,750

13-5/8”

10,000

13-5/8

134.500” 201.000” 66.625”

51.88"

30.250”

15.125”

17.094”

7.50”

40.062”

17.438”

20,388

17,612

19,000

TC1001-06

130.75"

A-2

38

© 2006 Cameron International Corporation

UM BOP Specifications and Dimensions The capital letters in the following designations refer to the UM BOP dimensional views and dimensional chart shown below. A-1 Length - bonnets closed, locking screws locked A-2 Length - bonnets opened, locking screws unlocked B-1 Height - flanged B-2 Height - studded C Width - no side outlets D Centerline of preventer to outlet flange or hub face. This distance is variable and must be determined per individual specifications. E Centerline of side outlet to bottom flange face F Top of ram to top flange face G Height of ram A

C

D

F

G

B E SD 034612

Single UM BOP with Tandem Boosters Dimensions Size (In.)

Pressure Rating (psi)

Vertical Bore (in)

7-1/16

3000

7-1/16

5000

7-1/16

Approx. Weight (lb.)FlgXFlg

Approx. Weight (lb.)StdXStd

Approx. Weight (lb.)FlgXStd

5.50

3760

3514

3637

5.50

381

3462

3637

12.031

5.50

4435

3535

3985

11.688

12.656

5.50

4685

3285

3985

17.100

17.480

9.25

17,059

16,089

16,574

15.125

17.094

7.5

11,600

11,000

11,330

A-1

A-2

B-1

B-2

C

E

F

G

(In.)

(In.)

(In.)

(In.)

(In.)

(In.)

(In.)

(In.)

7-1/16

116.33

154.70

24.062

18.38

20.625

8.750

7.844

7-1/16

116.33

154.70

27.500

19.75

20.625

10.406

9.625

10,000

7-1/16

116.33

154.70

30.562

23.53

20.625

11.062

7-1/16

15,000

7-1/16

116.33

154.70

31.812

23.79

20.625

11

15,000

11

161.88

234.38

46.250

32.25

30.500

13-5/8

10,000

13-5/8

169.125

235.875

41.688

30.88

30.50

TC1001-06

39

© 2006 Cameron International Corporation

37

22

34

40

26

33

3

6

35

43

27

25

44

37

6

35

29

28

24

38

12

31

33

34

39

23

5

4

20

31

13

11

10

51

15

14

17

66

53

52 67 56

36

54

1 55

19

18

16

21

2 50

UM BOP, 7-1/16” SD 034510 TC1001-06

40

© 2006 Cameron International Corporation

7-1/16” UM BOP Part Numbers Item No.

Description

Qty Single

Qty Double

1 2 3 4 5 6 10 11 12 13 *14 *15 *16 *17 18 19 20 21 22 23 24 25 26 *27 28 29 *30 *31 *32 *33 34 *35 *36 *37 38 39 40 41 42 *43 *44 46 47 48 66 67 50 51 51A 52 53 54 55 56 66 67

Body Bonnet Operating Piston Ram Change Piston, Open Ram Change Piston, Close Ram Change Cylinder Pin, Ram Guide Check Valve Screw, Socket Head Set Pipe Plug, Heavy Hex Head Retainer Ring, Plastic Packing Energizing Ring Lip Seal O-Ring Retainer, Lip Seal Retaining Ring, Spirolox Locking Screw Ring Gasket Locking Screw Housing Operating Cylinder Cylinder Head Weldment Stud, Double Ended Nut, Heavy Hex Seal Ring Retainer Ring, Tail Rod Retaining Ring, Spirolox Seal Ring O-Ring O-Ring Seal RIng Wear Ring, Ram Change Piston O-Ring O-Ring O-Ring Stud, Double Ended Nut, Heavy Hex Lifting Eye Split Retainer Ring Concentric Booster Ring Seal Ring Plastic Packing Blind Plug Pipe Plug Tubing Gland Name Plate Name Plate Bonnet Bolt Bonnet Seal (Carrier Type) Bonnet Seal (Face Type) Stud, Double Ended Nut, Heavy Hex Stud, Double Ended Nut, Heavy Hex Name Plate Name Plate Name Plate

1 2 2 2 2 4 4 2 2 2 2 2 2 2 2 2 2 4 2 2 2 8 8 2 2 2 2 4 2 4 4 8 4 8 16 16 4 2 2 2 10 4 4 4 1 1 8 4 2 12 12 ------1 1 1

1 4 4 4 4 8 8 4 4 4 4 4 4 4 4 4 4 8 4 4 4 16 16 4 4 4 4 8 4 8 8 16 8 16 32 32 8 4 4 4 20 8 8 8 1 ---16 8 4 ------------1 1 1

Ram Change Piston Cover Standard Accessory Items Locking Screw Accessory Items

2 1 2

4 1 4

Ring Gasket Ring Gasket Bonnet Rebuild Kit

2 2 2

4 4 4

7-1/16” 5000 psi Model II ---2010585-01 2010559-01 2011075-01 2011073-01 2011074-01 030313-02 M517988 005940-09 005930-05-10 2010178-01 018586-12 212741-37-00-01 018492-92 689523-04 018572-83 2010519-01 ---2010530-01 2010529-02 2011328-01 2010189-19 2709000-13-01 2708749-01 2010527-01 041008-02-93-32 2710280 702645-37-61 702645-26-91 2724047 049223-28 702645-33-71 702645-32-81 702645-32-41 219065-08-03-61 2709000-08-01 011849 2010599-01 2010600-01 710541 007650-08 017454-09 002504-04 017454-08 2032175-03 025950 2010514-02 ---644197-01-00-01 ---------------2032175-03 025950 Accessory Items 645046-17 697149-01 ---Expendable Items 702002-03-52 702002-04-62 2010733-01

7-1/16” 10,000 psi Model II ---2010584-01 2010559-01 2011075-01 2011073-01 2011074-01 030313-02 M517988 005940-09 005930-05-10 2010178-01 018586-12 212741-37-00-01 018492-92 689523-04 018572-83 2010519-01 021792-21 2010530-01 2010529-02 2011328-01 2010189-19 2709000-13-01 2708749-01 2010527-01 041008-02-93-32 2710280 702645-37-61 702645-26-91 2724047 049223-28 702645-33-71 702645-32-81 702645-32-41 219065-08-03-61 2709000-08-01 011849 2010599-01 2010600-01 710541 007650-08 ---------2032175-01 025950 2010514-03 ---644197-01-00-01 219067-14-07-41 2709000-14-01 ------236606-01 2032175-01 025950

7-1/16” 15,000 psi Model II ---2010515-03 2010559-01 2011075-01 2011073-01 2011074-01 030313-02 M517988 005940-09 005930-05-10 2010178-01 018586-12 212741-37-00-01 018492-92 689523-04 018572-83 2010519-01 ---2010530-01 2010529-02 2011328-01 2010189-19 2709000-13-01 2708749-01 2010527-01 041008-02-93-32 2710280 702645-37-61 702645-26-91 2724047 049223-28 702645-33-71 702645-32-81 702645-32-41 219065-08-03-61 2709000-08-01 011849 2010599-01 2010600-01 710541 007650-08 017454-09 002504-04 017454-08 ------2010514-01 ---644197-01-00-01 ----------------------

645046-17 697149-02 697150-01

645046-17 697149-02 697150-01

702003-15-22 702003-15-62 2010733-01

702003-15-22 702003-15-62 2010733-01

*These items included in Bonnet Rebuild Kit.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

41

© 2006 Cameron International Corporation

35

38

26

22

6

5

28

32

33

21

23

21

30 31

3

4 32

35

6

33

28

17 36

20

37

24 86

25

40

42

2

62

10

78

15

14

17

34

1

11

52

74

41

29

12

13

87

19

18

16

43

UM BOP, 11” 5000 and 10,000 psi WP SD 034498 TC1001-06

42

© 2006 Cameron International Corporation

11” 5000 & 10,000 UM BOP Part Numbers Item No. 1 2 2A 3 4 4A 5

Description

Body Bonnet (Seal Carrier) Bonnet (Face Seal) Piston Subassembly Ram Change Piston - Open Ram Change Piston - Open, Special Ram Change Piston - Close Ram Change Piston - Close, 5A Special 6 Ram Change Cylinder 8 O-Ring 9 Ram Change Piston Cap 10 Ram Guide Pin 11 Check Valve 12 Set Screw, Socket Head 13 Pipe Plug *14 O-Ring *15 Energizing Ring *16 Lip Seal *17 O-Ring 18 Retainer, Lip Seal 19 Retaining Ring, Spirolox 20 Locking Screw *21 O-Ring 22 Locking Screw Housing 23 Operating Cylinder 24 Cylinder Head Weldment 25 Stud, Double Ended 26 Nut *28 O-Ring *29 Plastic Packing *30 Seal Ring 31 Wear Ring 32 Wear Ring *33 O-Ring *34 O-Ring *35 O-Ring 36 Stud, Double Ended 37 Nut 38 Lifting Eye 40 Blind Plug 41 Plug, Pipe, Threaded 42 Tubing Gland *43 Ring Gasket 52 Bonnet Bolt 62 Bonnet Seal Carrier 62A Bonnet Seal (Face Type) 62B Bonnet Seal (Carrier Type) Retainer Ring (Use with Seal 62C Carrier) 74 O-Ring 78 Lifting Eye 96 Name Plate 97 Name Plate

Qty Single 1 2 2 2 2 ---2

Qty Double 1 4 4 4 4 ---4

11” 5000 psi ---2113870-01 2011152-01 2011173-01 2011155-01 ---2011144-01

11” 10,000 psi ---2164126-03 2164126-01 2011173-01 2011155-01 ---2011144-01

----

----

----

----

4 ------4 2 2 2 2 2 2 6 2 2 2 4 2 2 2 8 8 4 10 2 2 4 8 4 8 16 16 2 4 4 4 4 8 2 2 2

8 ------8 4 4 4 4 4 4 12 4 4 4 8 4 4 4 16 16 8 20 4 4 8 16 8 16 32 32 4 8 8 8 8 16 4 4 4

2011154-01 702645-34-81 2231350-01 030313-03 M517988 005940-09 005930-05-10 2010178-02 018586-13 212741-38-00-01 018492-91 689523-05 018572-84 046628-01 702645-38-21 2011168-01 2011172-01 2011167-01 219065-17-20-01 2164777-01 702645-33-31 007650-25 2724061 049223-31 049223-32 702645-33-91 702645-33-01 702645-32-61 219065-12-05-01 2709000-12-01 011849 017454-09 002504-04 017454-08 021792-22 2010962-01 645464-02-00-01 644197-02-00-01 645484-02-00-01

2011154-01 702645-34-81 2231350-01 030313-03 M517988 005940-09 005930-05-10 2010178-02 018586-13 212741-38-00-01 018492-91 689523-05 018572-84 046628-01 702645-38-21 2011168-01 2011172-01 2011167-01 219065-17-20-01 2164777-01 702645-33-31 007650-25 2724061 049223-31 049223-32 702645-33-91 702645-33-01 702645-32-61 219065-12-05-01 2709000-12-01 011849 017454-09 002504-04 017454-08 021792-22 2164128-01 645464-02-00-01 644197-02-00-01 645484-02-00-01

2

4

702645-27-61

702645-27-61

8 2 1 1

16 2 1 1

702645-22-91 011849 2032175-03 025950

702645-22-91 011849 2032175-03 025950

Standard Accessories Locking Screw Accessories Cover, Ram Change Pistons

1 2 2

Accessory Items 1 4 2

697149-02 697150-02 645046-18

697149-02 697150-02 645046-18

Ring Gaskets (Top & Bottom Conn.)

2

Expendable Items 2

702002-05-42

702003-15-82

Bonnet Rebuild Kit

2

4

2010733-02

2010733-02

*These items included in Bonnet Rebuild Kit.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

43

© 2006 Cameron International Corporation

TC1001-06

44

© 2006 Cameron International Corporation

11” 15,000 UM BOP Part Numbers Item No.

Description

Qty Single

Qty Double

11” 15,000 psi

1

Body

1

1

----

2

Bonnet (Seal Carrier)

2

4

2231079-01

2A

Bonnet (Face Seal)

2

4

----

3

Piston Subassembly

2

4

2231105-01 2164854-01

4 4A 5 5A

Ram Change Piston - Open Ram Change Piston - Open, Special Ram Change Piston - Close Ram Change Piston - Close, Special

2

4

----

----

----

2

4

2164853-01

----

----

----

6

Ram Change Cylinder

4

8

2164347-02

*7

Ring, Wear

4

8

049223-38

*8

O-Ring

4

8

702645-35-71

9

Ram Change Piston Cap

4

8

2164855-01

10

Ram Guide Pin

4

8

030313-01

11

Ring, Retaining

8

16

708758

12

Retainer, Polypak

8

16

689523-06

*14

O-Ring

8

16

2724613-01

*15

Ring, Ram Change Piston, Wear

2

4

2164449-01

16

Valve, Check

2

4

M51798

17

Screw, Socket Head

2

4

005940-09

18

Plug, Pipe

2

4

005930-05-10

*19

Packing, Plastic

2

4

007650-25

20

Locking Screw

2

4

695234

22

Locking Screw Housing

2

4

2164346-01

23

Operating Cylinder

2

4

2164348-02

24

Cylinder Head Weldment

2

4

2164852-01

25

Stud, Double Ended

12

24

2164361-01

26

Nut

12

24

2709000-12-21

*27

Ring, Plastic Packing

2

4

012469-24

*28

Ring, Energizing

2

4

018586-01

*29

Ring, Operating Piston, Wear

2

4

049223-31

*30

Seal Ring

2

4

2724061

*31

O-Ring

4

8

702645-38-21

32

Washer

24

48

K220607

33

Washer, Bonnet Bolt

8

16

2164450-01

*35

O-Ring

4

8

702645-33-81

*36

O-Ring

8

16

702645-34-61

*37

O-Ring

8

16

702645-32-81

*38

O-Ring

4

8

702645-33-31

39

Screw

16

32

702585-25-00-30

40

Lifting Eye

4

8

11849

42

Plug, Bleeder

4

8

2028834-01

43

Plug, Pipe

8

16

002504-14

45

Plug, Pipe

4

8

203682

50

Bonnet Bolt

8

16

2164362-01

*51

O-Ring

8

16

2164718-01

66

Plug, Pipe

2

4

201019

69

Bonnet Seal Carrier

2

4

2231081-01

83

Bonnet Seal Carrier Seal Mold

4

8

2231080-01

Accessory Items Standard Accessories

1

1

697149-12

Locking Screw Accessories

2

4

697150-02

1

1

236177-42

Protector, Bride

Expendable Items Ring Gaskets (Top & Bottom)

2

2

702003-15-82

Bonnet Rebuild Kit

2

4

2010733-03

*These items included in Bonnet Rebuild Kit.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

45

© 2006 Cameron International Corporation

31

15

38

23 31 36 37

20

45

9

8

35

36

6

5

22

39

4

75 74 1

76

33

29

3

30

11

43

40

2

42

41

10

66 65

50

See Detail “A”

64

16

12

14

78

43

32

24

11

42

12

14

41

43

11

43

19

17

18

51

71

3

70

40

28

25

27

14

12

11

Detail “A”

43

43

12

14

26

UM BOP, 13-5/8” SD034538 TC1001-06

46

© 2006 Cameron International Corporation

13-5/8” UM BOP Part Numbers Item No. 1 2 2A 3 4 4A 5 5A 6 6A *7 *8 9 9A 10 *11 *12 *14 *15 16 17 18 *19 20** 22** 23 23 24 24 25 26 *27 *28 *29 *30 *31 32 33 *35 *36 *37 37A *38 39** 40 41 42 43 45 50 *51 64 65

Description Body Bonnet (Seal Carrier) Bonnet (Face Seal) Piston Subassembly Ram Change Piston - Open Ram Change Piston - Open, Special Ram Change Piston - Close Ram Change Piston - Close, Special Ram Change Cylinder Ram Change Cylinder, Special Wear Ring O-Ring Ram Change Piston Cap Ram Change Piston Cap, Special Ram Guide Pin Retainer Ring, Spirolox, Operating Piston Retainer, Polypak Seal Polypak Wear Ring, Ram Change Piston Check Valve Screw, Socket Head Pipe Plug Packing, Plastic Locking Screw Locking Screw Housing Operating Cylinder Operating Cylinder, Special Cylinder Head Cylinder Head, Special Cylinder Stud Nut, Cylinder Retainer Ring, Plastic Packing Energizing Ring Wear Ring, Operating Piston Seal Ring O-Ring Washer, Cylinder Stud Washer, Bonnet Bolt O-Ring O-Ring O-Ring O-Ring, Special for V Threaded Ram Change Piston O-Ring Screw Lifting Eye Tubing Gland Blind Plug Pipe Plug, Pressure Pipe Plug, Threaded Bonnet Bolt O-Ring Name Plate Name Plate

Qty Single 1 2 2 (2) 2 2 2 2 4 4 4 4 4 4 4 8 8 8 4 2 2 2 2 2 2 2 2 2 2 24 24 2 2 2 2 4 24 8 4 8 8 8 4 16 4 4 4 12 4 8 8 1 1

Qty Double 1 4 4 (4) 4 4 4 4 8 8 8 8 8 8 8 16 16 16 8 4 4 4 4 4 4 4 4 4 4 48 48 4 4 4 4 8 48 16 8 16 16 16 8 32 8 8 8 24 8 16 16 1 1

13-5/8” 5000 psi --2231830-01 --2164345-03 2164854-01 --2164853-01 --2164347-02 --049223-38 702645-35-71 2164855-01 --030313-01 708758 689523-06 2724613-01 2164449-01 M517988 005940-09 005930-05-10 007650-25 695234 2164346-01 2164348-02 --2231831-01 --2164361-01 2709000-12-22 012469-24 018586-01 049223-31 2724061 702645-38-21 K220607 --702645-33-81 702645-34-61 --702645-32-81 702645-33-31 702585-25-00-30 011849 --2028834-01 002504-14 203682 2231829-01 702645-33-43 025950 2032175-03

13-5/8” 10,000 psi ---2164340-01(02) 2164343-01(02) 2164345-01 2164433-02 2164433-01 2164434-02 2164434-01 2164347-02 2164347-01 049223-38 702645-35-71 2164855-01 2164342-01 030313-01 708758 689523-06 2724613-01 2164449-01 M517988 005940-09 005930-05-10 007650-25 695234 2164346-01 2164348-02 2164348-01 2164341-02 2164341-01 2164361-01 2709000-12-22 012469-24 018586-01 049223-31 2724061 702645-38-21 K220607 2164450-01 702645-33-81 702645-34-61 702645-32-41 702645-32-81 702645-33-31 702585-25-00-30 011849 017454-08 017454-09 002504-14 203682 2164362-01 2164718-01 025950 2032175-03

*These items included in Bonnet Rebuild Kit P/N 2010733-03. Two required for single, Four required for double. **Not Required When Using Wedgelocks or Tandem Boosters ***Optional Tandem Boosters

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

47

© 2006 Cameron International Corporation

13-5/8” UM BOP Part Numbers Item No. 66 70 71 74 75 76 77 78* 78A 78B 79 80***

Description Name Plate Lifting Lug Screw, Cap Stud, Top End Connection Nut, Top End Connection Pipe Plug Bonnet Seal Carrier Bonnet Seal (for Carrier) Bonnet Seal (Face Type) Retainer Ring (Use with Seal Carrier) O-Ring Tandem Booster Assembly (Qty. 1 for 2 Bonnets) Standard Accessories Locking Screw Accessories Ram Change Piston Cover Spanner Wrench Ring Gaskets (Top & Bottom Connection) Eyebolt Paste Loctite Adhesive Thread Sealant Bonnet Rebuild Kit

Qty Qty Double Single 1 1 2 2 8 8 16 16 16 16 2 4 2 4 4 8 (2) (4) 2 4 2 4 1 1 Accessory Items 1 1 2 4 2 2 1 1 Expendable Items 2 2 2 2 1 1 1 1 1 1 2 4

13-5/8” 5000 psi ---------219065-15-08-02 2709000-15-02 201019 644507-01-00-02 644509-01-00-01 -------------

13-5/8” 10,000 psi 236606-01 2164420-01 702585-31-00-34 219065-17-10-71 2709000-17-01 201019 645507-01-00-02 645509-01-00-01 644197-03-00-01 702645-27-91 702645-56-91 2164649-01

697149-02 697150-02 645046-04 ----

697149-12 697150-02 2164429-01

---------------2164148-08

702003-15-92 700734 705444 708740 711706 2010733-03

*These items included in Bonnet Rebuild Kit P/N 2010733-03. Two required for single, Four required for double. **Not Required When Using Wedgelocks or Tandem Boosters ***Optional Tandem Boosters

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

48

© 2006 Cameron International Corporation

Minimum Shearing Configurations for the UM BOP API Designated Size

Ram Type

Pressure Rating (psi)

Pipe OD (In.)

Pipe lb/ft

Pipe Grade

7-1/16”

SBR

All

3-1/2

13.3

S

Shearing Configuration

Shear Bonnets with Tandem Boosters

7-1/16"

DSI

All

3-1/2

13.3

S

Shear Bonnets with Tandem Boosters

11”

SBR

10,000 and Lower

5

19.5

E

Shear Bonnets with Tandem Boosters

11”

DS

10,000 and Lower

5

19.5

E

Standard Bonnets

13-5/8”

SBR

10,000 and Lower

5

19.5

G

Shear Bonnets with Tandem Boosters

13-5/8”

DS

10,000 and Lower

5

19.5

G

Shear Bonnets with Tandem Boosters

Note: See pages 50 and 51 for a complete list of part numbers for the tandem boosters.

16 1 7 17 5 13 12 6 15 14 3 11 10 9 24 23 4 25 8

28 29 26 27

29 30

Tandem Booster Assembly SD 034536

TC1001-06

49

© 2006 Cameron International Corporation

Tandem Boosters for UM BOPs A BOP equipped with tandem boosters can deliver increased shearing force while not increasing the wear and tear on the packers. Tandem boosters approximately double the force available to shear pipe. Since the tailrod of the tandem booster has the same stroke as the BOP’s operating piston, the standard shear locking mechanism can be installed on the outside end of the booster. For information concerning applications where a tandem booster is required, refer to EB720D or consult your local Cameron representative.

7-1/16" 3000, 5000, 10,000 and 15,000 psi WP UM Tandem Booster Item Number

Description

Quantity

Part Number

1

Cylinder

2

644959-01

2

Cylinder Head

2

2231474-01

3

Piston

2

644961-01

4

Tail Rod

2

2231207-01

5

Adapter

2

2231475-01

6

Screw, 12 Pt. Cap

16

702585-16-00-22

*7

O-Ring

2

702645-24-91

*8

Seal Ring

2

710541

*9

Wear Ring

2

049223-03

*10

Filter, Muffler

2

710621

*11

Lip Seal

2

011741-32

*12

Seal Ring

2

710620

*13

Wear Ring

2

644443-02

*14

Seal Ring

2

705955

*15

O-Ring

2

702645-33-11

16

Centralizing Ring

2

236488-01

17

Plug, Pipe-Threaded Hex Socket

2

002504-14

18

Elbow, 90 Degree Male

4

204890-06-04-12

19

Tubing, Hydraulic

2

2711865-08-09

20

Pipe Bushing

2

704492

Optional Items Repair Kit

1

2164148-01

*These items are included in the repair kit. One repair kit required per unit.

TC1001-06

50

© 2006 Cameron International Corporation

11" 15,000 and 13-5/8” 10,000 psi WP UM Tandem Booster Item Number

Description

Qty.

Part Number 11" 15,000 psi WP

Part Number 13-5/8” 10,000 psi WP

Qty.

1

Adapter

2

2164650-01

2

2164650-01

3

Cylinder

2

2010884-03

2

2010884-01

4

Cylinder Head

2

2010882-02

2

2010882-02

5

Tail Rod

2

2010880-04

2

2010880-01

6

Piston

2

645172-03

2

645172-03

7

Screw, 12 Pt Cap

16

702585-25-00-30

16

702585-25-00-30

8

Screw, 12 Pt Cap

12

702585-34-01-40

12

702585-34-01-54

*9

O-Ring

2

702645-33-71

2

702645-33-71

*10

Seal, Lip

2

011741-34

2

011741-34

*11

O-Ring

2

702645-38-12

2

702645-38-12

*12

Seal Ring

2

710418

2

710418

*13

Wear Ring

2

645215-01

2

645215-01

*14

Wear Ring

2

049223-01

2

049223-01

*15

Seal Ring

2

710538

2

710538

*16

Filter, Muffler, Quiet Flow

2

710621

2

710621

17

Stud, Continuous Thread

2

702533-09-10-22

2

702533-09-10-22

23

Gland, Tubing

2

017454-08

2

017454-08

24

Blind Plug

2

017454-09

2

017454-09

25

Plug, Pipe-Threaded Hex Socket

2

002504-28

2

002504-28

26

Tubing, Hydraulic

2

2711865-12-11

2

2711865-12-11

27

Bushing, Pipe

2

K194489

2

K194489

28

Bushing, Pipe

2

203098

2

203098

29

Connector, Tubing, Male

2

204887-08-05-17

4

204887-08-05-17

30

Elbow, 90 Degree, Male

2

204890-08-05-17

2

204890-08-05-17

31

Locking Screw

2

695234

--

--

32

Screw

16

702585-25-00-30

--

--

33

Housing, Locking Screw

2

2231104-01

--

--

1

2164148-02

Optional Items Repair Kit

TC1001-06

1

2164148-02

51

© 2006 Cameron International Corporation

U and UM BOP Standard Accessories U and UM BOP Standard Accessories Size and Working Pressure

Ram Lube*

Cameron Box Wrench*

Allen Wrench* Packing Screw

Handwheel**

Universal Joint**

Extension Wrench*

7-1/16” 3000 psi

713878

713114-08

008721-01

005457

006018-01

005652

7-1/16” 5000 psi

713878

713114-08

008721-01

005457

006018-01

005652

7-1/16” 10,000 & 15,000 psi

713878

713114-10

008721-01

005457

006018-01

005652

11” 3000, 5000 & 10,000 psi

713878

713114-10

008721-01

005298

006018-03

005526

11” 15,000 psi

713878

713114-13

008721-01

005298

006018-03

005526

13-5/8” 3000 & 5000 psi

713878

713114-10

008721-01

005298

006018-03

005526

13-5/8” 10,000 psi

713878

713114-13

008721-01

005298

006018-03

005526

13-5/8” 15,000 psi

713878

***

008721-01

005298

006018-03

005526

16-3/4” 3000 & 5000 psi

713878

713114-13

008721-01

005298

006018-03

005526

16-34/4” 10,000 psi

713878

***

008721-01

005298

006018-03

005526

18-3/4” 10,000 psi

713878

***

008721-01

005298

006018-03

005526

20-3/4” 3000 psi

713878

713114-08

008721-01

005298

006018-03

005526

21-1/4” 2000 psi

713878

713114-10

008721-01

005298

006018-03

005526

21-1/4” 5000 psi

713878

***

008721-01

005298

006018-03

005526

21-1/4” 10,000 psi

713878

***

008721-01

005298

006018-03

005526

26-3/4” 3000 psi

713878

713114-13

008721-01

005298

006018-03

005526

*One required **Two required for single preventer, four for double preventer. ***Commercially available sockets are recommended.

TC1001-06

52

© 2006 Cameron International Corporation

U, UL and UM BOP Pipe Rams The standard "U" BOP pipe rams are interchangeable for the U, UL and UM BOP's. Pipe rams are available for use in Cameron U, UL and UM BOPs to fit all commonly used sizes of tubing, drill pipe, drill collar or casing within the ranges in the charts on the following pages. Cameron pipe rams include the following features: • Cameron pipe rams are self-feeding and incorporate a large reservoir of packer rubber to ensure a long-lasting seal under all conditions. • Ram packers lock into place and are not dislodged by well flow. • All Cameron pipe rams are suitable for H2S service per NACE MR-01-75. • CAMRAM™ top seals are standard for all U, UL and UM BOP pipe rams from 7-1/16” through 18-3/4” sizes. Packer part numbers beginning with 644xxx indicate the CAMRAM lipped-plate design. Other part numbers may use standard elastomer material and reinforced plates. Verify this with your Cameron representative. CAMRAM 350™ packers and top seals are available for high temperature service and for service in which concentrations of H2S are expected.

U, UL and UM BOP Pipe Ram

TC1001-06

53

© 2006 Cameron International Corporation

Part Numbers for U, UL & UM BOP Pipe Rams 7-1/16” 3000, 5000, 10,000, and 15,000 psi WP Top Seal 644214-01-00-01

Pipe Size (in.)

11” 3000, 5000, and 10,000 psi WP Top Seal 644217-01-00-01

Assembly

Ram

Packer

Assembly

Ram

Packer

Blind

644504-01

644500-01-00-02

644215-01-00-01

644219-01

044118-01

644218-01-00-01

1.050

644504-02

644501-01

644215-02

-

-

-

1.315

644504-03

644501-02

644215-03

044233-25

044118-07

644218-02-00-01

1.660

644504-04

644501-03

644215-04-00-01

044233-02

044118-02

644218-03-00-01

1.900

644504-05

644501-04

644215-05-00-01

044233-03

044118-03

644218-04-00-01

2.062

644504-06

644501-05

644215-06-00-01

044233-04

044118-04

644218-05-00-01

2.375

644504-07

644501-06

644215-07-00-01

644219-06

044118-05

644218-06-00-01

2.875

644504-08

644501-07

644215-08-00-01

644219-07

044118-06

644218-07-00-01

3.500

644504-09

644502-01-00-01

644215-09-00-01

644219-08

644835-01-00-02

644218-08-00-01

4.000

644504-11

644503-02

644215-11-00-01

644219-10

044119-02

644218-10-00-01

4.500

644504-12

644503-03

644215-12-00-01

644219-11

644835-02

644218-11-00-01

4.750

-

-

-

044233-12

044119-04

644218-13

5.000

644504-14

644503-05

644215-14-00-01

644219-14

644835-03-00-01

644218-14-00-01

5.500

644504-15

644503-06

644215-15-00-01

644219-16

044120-01

644218-16-00-01

5.750

-

-

-

044233-23

044120-10

644218-17

5.875

-

-

-

-

-

-

6.000

-

-

-

044233-16

044120-02

644218-18-00-01

6.625

-

-

-

044233-17

644835-04

644218-19-00-01

7.000

-

-

-

044233-18

044120-04

644218-20-00-01

7.625

-

-

-

044233-19

044120-05

644210-21-00-01

7.750

-

-

-

044233-22

044120-09

644218-22-00-01

8.625

-

-

-

044233-20

044120-06

644218-23-00-01

9.000

-

-

-

-

-

-

9.625

-

-

-

-

-

-

10.750

-

-

-

-

-

-

11.750

-

-

-

-

-

-

3.500 Aluminum

644504-10

644503-01

644215-10

044233-08

044119-06

644218-09

4.500 Aluminum

644504-13

644503-04

644215-13

044233-11

044119-07

644218-12

5.000 Aluminum

-

-

-

044233-24

044119-08

644218-15

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

54

© 2006 Cameron International Corporation

Part Numbers for U, UL & UM BOP Pipe Rams 11” 15,000 psi WP Top Seal 2010453-01

Pipe Size (in.)

13-5/8” 3000, 5000, and 10,000 psi WP Top Seal 644223-01-00-01

Assembly

Ram

Packer

Assembly

Ram

Packer

Blind

644222-01

044121-01

644221-01

644225-01

044147-01-00-01

644224-01-00-01

1.050

-

-

-

-

-

-

1.315

-

-

-

644225-02

044148-06

644224-02

1.660

644222-02

044121-02

644221-02

644225-03

044148-05

644224-03

1.900

644222-03

044121-03

644221-03

644225-04

044148-07

644224-04

2.062

644222-04

044121-04

644221-04

644225-05

044148-03

644224-05

2.375

644222-05

044121-05

2010454-05

644225-06

044148-01-00-01

644224-06-00-01

2.875

644222-06

044121-06

2010454-06

644225-07

044148-02-00-01

644224-07-00-01

3.500

644222-07

644753-01

2010454-07

644225-08

644738-01-00-01

644224-08-00-01

4.000

644222-08

044122-04

2010454-08

644225-10

044149-02

644224-10-00-01

4.500

644222-09

644753-02

2010454-09

644225-11

644738-02

644224-11-00-01

4.750

-

-

-

644225-13

044150-01

644224-13

5.000

644222-10

644753-03

2010454-10

644225-14

644738-03-00-01

644224-14-00-01

5.500

044234-13

044123-01

2010454-11

644225-16

044150-03

644224-16-00-01

5.750

-

-

-

-

-

-

5.875

-

-

-

644225-30

644738-06-00-01

644224-29-00-01

6.000

044234-14

044123-02

690808-13

044244-13

044150-04

644224-17

6.625

044234-15

044123-03

690808-14

644225-18

644738-04-00-02

644224-18-00-01

7.000

044234-16

044124-01

2010454-14

644225-19

044151-01-00-01

644224-19-00-01

7.625

044234-17

044124-02

690808-16

644225-20

044151-02

644224-20-00-01

7.750

-

-

-

044244-25

044151-06

644224-21

8.625

-

-

-

044244-16

044151-03

644224-22

9.000

-

-

-

044244-24

044151-04

644224-23

9.625

-

-

-

644225-24

044151-05-00-01

644224-24-00-01

10.750

-

-

-

644225-25

044152-01

644224-25-00-01

11.750

-

-

-

044244-26

614208-01

644224-26-00-01

3.500 Aluminum

-

-

-

044244-20

044149-04

644224-09

4.500 Aluminum

-

-

-

044244-10

044149-05

031215-17

5.000 Aluminum

-

-

-

044244-32

044150-08

031215-27

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

55

© 2006 Cameron International Corporation

Part Numbers for U, UL & UM BOP Pipe Rams 13-5/8” 15,000 psi Top Seal 644226-01-00-01

Pipe Size (in.)

16-3/4” 3000, 5000, and 10,000 psi Top Seal 644229-01-00-01

Assembly

Ram

Packer

Assembly

Ram

Packer

Blind

644228-01

044143-01

644227-01-00-01

644231-01

044179-01

644230-01-00-01

1.050

-

-

-

-

-

-

1.315

-

-

-

-

-

-

1.660

-

-

-

-

-

-

1.900

-

-

-

644231-02

044180-03

644230-02-00-01

2.062

044243-02

044144-03

040910-20

-

-

-

2.375

644228-03

044144-01

644227-03-00-01

644231-03

044180-01

644230-03

2.875

644228-04

044144-02

644227-04-00-01

644231-04

044180-02

644230-04

3.500

644228-05

644739-01

644227-05-00-01

644231-05

644740-01

644230-05-00-01

4.000

644228-07

044144-06

644227-07-00-01

644231-06

044181-02

644230-06-00-01

4.500

644228-08

644739-02

644227-08-00-01

644231-07

644740-02

644230-07-00-01

4.750

044243-10

044145-01

644227-10

644231-08

044181-04

644230-08-00-01

5.000

644228-11

644739-03

644227-11-00-01

644231-09

644740-03

644230-09-00-01

5.500

044243-12

044145-03

644227-12-00-01

644231-10

044181-06

644230-10-00-01

5.750

-

-

-

-

-

-

5.875

2164172-07

2724029-06

644227-24-00-01

644231-22

2724030-06

644230-23

6.000

044243-14

044145-04

040910-09

644231-11

049291-01

644230-11

6.625

044243-15

644739-04

644227-14-00-01

644231-12

049291-02

644230-12

7.000

044243-16

044146-01

644227-15-00-01

644231-13

049291-03

644230-13

7.625

044243-17

044146-02

644227-16-00-01

644231-14

049291-04

644230-14

7.750

044243-22

044146-07

644227-17

-

-

-

8.625

044243-18

044146-03

644227-18

644231-15

049291-06

644230-15-00-01

9.000

044243-19

044146-04

040910-14

644231-16

049291-07

644230-16-00-01

9.625

044243-20

044146-05

644227-20-00-01

644231-17

049292-01

644230-17-00-01

10.750

044243-21

044146-06

644227-21-00-01

644231-18

049292-02

644230-18-00-01

11.750

-

-

-

644231-19

049292-03

644230-19-00-01

13.375

-

-

-

644231-20

049292-04

644230-20-00-01

13.625

-

-

-

-

-

13.750

-

-

-

-

-

-

16.000

-

-

-

-

-

-

3.500 Aluminum

044243-06

044144-05

644227-06

-

-

-

4.500 Aluminum

044243-08

044144-08

040910-05

-

-

-

5.000 Aluminum

-

-

-

-

-

-

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

56

© 2006 Cameron International Corporation

Part Numbers for U, UL & UM BOP Pipe Rams 18-3/4” 10,000 psi Top Seal 644232-01-00-01

Pipe Size (in.)

21-1/4” 5000 and 10,000 psi Top Seal 2010939-01

Assembly

Ram

Packer

Assembly

Ram

Packer

Blind

644234-01

044184-01

644233-01-00-01

044262-01

044214-01

2010851-19

1.050

-

-

-

-

-

-

1.315

-

-

-

-

-

-

1.660

-

-

-

-

-

-

1.900

-

-

-

-

-

-

2.062

-

-

-

-

-

-

2.375

044254-02

044185-01

644233-02

044262-02

044215-01

2010851-01

2.875

044254-03

044185-02

644233-03-00-01

044262-03

044215-02

2010851-02

3.500

644234-04

644741-01

644233-04-00-01

44262-04

644743-01

2010851-03

4.000

044254-06

044185-05

644233-06

044262-06

044215-05

040962-04

4.500

044254-07

644741-02

644233-07

044262-07

644743-02

2010851-05

4.750

044254-09

044185-08

041856-06

044262-09

044215-08

040962-06

5.000

644234-10

644741-03

644233-10-00-01

044262-10

644743-03

2010851-07

5.500

044254-11

044185-10

644233-11-00-01

044262-11

044215-10

2010851-08

5.750

-

-

-

-

-

-

5.875

644234-21

2724031-06

644233-21-00-01

044262-32

2724033-06

2010851-29

6.000

044254-13

044185-12

041856-09

044262-13

044215-12

040962-09

6.625

044254-14

044185-13

644233-13-00-01

044262-14

044215-13

2010851-10

7.000

044254-15

044185-14

644233-14-00-01

044262-15

044215-14

2010851-11

7.625

044254-16

044185-15

041856-12

044262-16

044215-15

040962-12

7.750

-

-

-

-

-

-

8.625

044254-17

044185-16

041856-13

044262-17

044215-16

040962-13

9.000

044254-18

044185-17

041856-14

044262-18

044215-17

040962-14

9.625

044254-19

044185-18

644233-18-00-01

044626-19

044215-18

040962-15

10.750

044254-21

044185-21

644233-19-00-01

044262-20

044216-01

040962-20

11.750

-

-

-

044262-21

044216-02

2010851-20

13.375

044254-22

044185-20

644233-20-00-01

044262-22

044216-03

2010851-22

13.625

-

-

-

044262-24

044216-05

040962-24

13.750

-

-

-

-

-

-

16.000

-

-

-

044262-23

044216-04

2010851-23

3.500 Aluminum

044254-05

044185-04

041856-16

044262-05

044215-04

040962-16

4.500 Aluminum

044254-08

044185-07

041856-17

044262-08

044215-07

040962-17

5.000 Aluminum

-

-

-

-

-

-

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

57

© 2006 Cameron International Corporation

Part Numbers for U, UL & UM BOP Pipe Rams 21-1/4” Bore 2000 psi 20-3/4” Bore 3000 psi Top Seal 2163621-01

Pipe Size (in.)

26-3/4” Bore 2000 and 3000 psi Top Seal 2163566-01

Assembly

Ram

Packer

Assembly

Ram

Packer

Blind

044256-01

044191-01

2163612-01

044260-01

044209-01

2163561-01

1.050

-

-

-

-

-

-

1.315

-

-

-

-

-

-

1.660

-

-

-

-

-

-

1.900

-

-

-

-

-

-

2.062

-

-

-

-

-

-

2.375

-

-

-

044260-02

614017-01

2163559-01

2.875

-

-

-

044260-03

614017-02

2163559-02

3.500

044256-02

645328-01

2163613-03

044260-04

614018-01

2163599-03

4.000

044256-03

044192-02

031228-04

044260-05

614018-02

2163599-04

4.500

044256-04

645328-02

2010583-05

044260-06

614018-03

2163599-05

4.750

044256-05

044192-04

031228-06

-

-

-

5.000

044256-06

645328-03-00-01

2163613-06

044260-07

614018-04

2163599-06

5.500

044256-07

044193-02

2163613-07

044260-08

614018-05

2163599-07

5.750

-

-

-

-

-

-

5.875

044256-32-00-01

645328-05-00-01

2163613-18

-

-

-

6.000

044256-08

044193-03

031228-09

044260-09

614019-01

2163559-08

6.625

044256-09

645328-04

2010583-10-01

044260-10

614019-02

2163559-09

7.000

044256-10

044193-05

031228-11

044260-11

614019-03

2163559-10

7.625

044256-11

044193-06

2010583-12

044260-12

614019-04

2163559-01

7.750

-

-

-

-

-

-

8.625

044256-13

044193-08

2010583-14

-

-

-

9.000

044256-14

044193-09

031228-15

044260-14

614019-06

2163599-13

9.625

044256-15

044193-10

031228-16

044260-15

614020-01

2163599-14

10.750

044256-16

044194-01

2010583-17

044260-16

614020-02

2163599-15

11.750

044256-17

044194-02

031228-18

044260-17

614020-03

2163599-16

13.375

044256-18

044194-03

2163613-15

044260-18

614020-04

2163599-17

13.625

044256-21

044194-05

2163613-20

-

-

-

13.750

044256-19

044194-04

031228-19

-

-

-

16.000

044256-20

044195-01

2010583-21

044260-19

614021-01

2163559-18

18.625

044256-22

614459-01

031228-25

-

-

-

20.000

-

-

-

044260-20

614021-02

2163559-21

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

58

© 2006 Cameron International Corporation

Hang-Off Weights Hang-off weights are estimated capacities with hardened top corners of the hang-off rams. This enables the rams to dig into the tool joint and provide superior hang-off capacity while still meeting NACE requirements. For variable bore rams (VBR’s) and FLEXPACKER rams hang-off data, refer to Cameron Engineering Bulletin 859D.

Hang-Off Weights (See Cameron Engineering Bulletin EB636D) Pipe Size

Pipe Rams

3-1/2"

425,000 lb

4-1/2"

550,000 lb

5"

600,000 lb

5-1/2"

600,000 lb

6-5/8"

600,000 lb

U BOP Shearing Blind Rams and DS Rams Cameron shearing blind rams shear the pipe in the hole, then bend the lower section of sheared pipe to allow the rams to close and seal. Shearing blind rams can be used as blind rams during normal drilling operations. The DS shearing blind ram can cut large diameter tubulars or multiple tubing strings regardless of their orientation to the centerline of the ram. A blade seal between the upper and lower faces eliminates the need for moving pipe after shearing. Features of shearing blind rams and DS rams include:

• Large frontal area on the blade face seal reduces pressure on the rubber and increases service • • • • •

TC1001-06

life. Cameron SBRs can cut pipe numerous times without damage to the cutting edge. The single-piece body incorporates an integrated cutting edge. TM CAMRAM top seals are standard for all U BOP shearing blind rams through 18-3/4”. For U and UII BOPs through 18-3/4”, part numbers beginning with 644XXX indicate the CAMRAM lipped-plate design. Other part numbers may use standard elastomer material and reinforced plates. Verify this with your Cameron representative. Cameron SBR’s, both with inserted and integral blades, meet the H2S requirements of both API 16A and NACE MR-0175. Sulfide stress cracking susceptible materials are used for the blades, however, the main body of the SBR’s are made of sulfide stress cracking resistant materials.

59

© 2006 Cameron International Corporation

Shearing Blind Ram

U, UL and UM BOP Shearing Blind Ram Part Numbers BOP Bore Size and Working Pressure

Description and Item Number 1 Upper Ram Subassy

2 Body*

3 Blade Packer*

4 Side Packer*

5 Side Packer*

7-1/16” 5000, 10,000, 15,000 psi

046792-01-00-03

046210-01-00-04

-

2010873-02

2010873-01

11” 5000, 10,000 psi

049392-01-00-02

049009-01-00-02

046910-04-00-01

046751-04-00-01

046752-04-00-01

2010458-01

2010459-01

046910-04-00-01

2010460-07

2040461-07

13-5/8” 5000, 10,000 psi

046748-01-00-01

046749-01-00-01

046910-01-00-01

046751-01-00-02

046752-01-00-02

13-5/8” 15,000 psi

614004-01-00-02

2010291-01

046910-01-00-02

046751-05-00-01

046752-05-00-01

16-3/4” 5000 psi

046766-01-00-01

049006-01-00-01

046910-03-00-01

046751-03-00-01

046752-03-00-01

16-3/4” 10,000 psi

046773-01-00-01

046774-01-00-01

046910-03-00-01

046751-03-00-01

046752-03-00-01

18-3/4” 10,000 psi

2010211-01

2010213-01

2010192-01

2010191-01

2010190-01

20-3/4” 3000 psi

046783-01-00-02

046784-01-00-02

-

615235-01-00-02

-

21-1/4” 2000 psi

046783-01-00-02

046784-01-00-02

-

615235-01-00-02

-

21-1/4” 5000 psi

049983-01

049961-01

046910-05-00-01

046751-06-00-01

046752-06-00-01

21-1/4” 7500, 10,000 psi

046788-01

049012-01

046910-05-00-01

046751-06-00-01

046752-06-00-01

11” 15,000 psi

Description and Item Number BOP Bore Size and Working Pressure

6 Lower Ram Subassy**

7 Body

8 Side Packer

9 Side Packer

10 Top Seal (2 Required)

7-1/16” 5000, 10,000, 15,000 psi

046792-02-00-03

046212-01-00-04

2010872-01

-

644214-01-00-01

11” 5000, 10,000 psi

049392-02-00-02

049010-01-00-02

046751-04-00-01

046752-04-00-01

644217-01-00-01

2010458-02

2010459-02

2010460-07

2010461-07

2010453-01

13-5/8” 5000, 10,000 psi

046748-02-00-01

046750-01-00-01

046751-01-00-02

046752-01-00-02

644223-01-00-01

13-5/8” 15,000 psi

614004-02-00-02

2010292-01

046751-05-00-01

046752-05-00-01

644226-01-00-01

16-3/4” 5000 psi

046766-02-00-01

049007-01-00-01

046751-03-00-01

046752-03-00-01

644229-01-00-01

16-3/4” 10,000 psi

046773-02-00-01

046775-01-00-01

046751-03-00-01

046752-03-00-01

644229-01-00-01

18-3/4” 10,000 psi

2010210-01

2010212-01

2010191-01

2010190-01

2010193-01

20-3/4” 3000 psi

046783-02-00-02

046785-01-00-02

615247-01-00-02

615247-02-00-02

2163621-01

21-1/4” 2000 psi

046783-02-00-02

046785-01-00-02

615247-01-00-02

615247-02-00-02

2163621-01

21-1/4” 5000 psi

049983-02

049982-01

046751-06-00-01

046752-06-00-01

645478-01-00-01

21-1/4” 7500, 10,000 psi

046788-02

049011-01

046751-06-00-01

046752-06-00-01

645478-01-00-01

11” 15,000 psi

*Part of Upper Ram Assembly.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

60

© 2006 Cameron International Corporation

H2S Shearing Blind Ram

U, UL and UM BOP H2S Shearing Blind Ram Part Numbers BOP Bore Size and Working Pressure (psi)

1 Upper Ram Subassy

2 Ram

3 Blade Packer

4 Packer

5 Packer

6 Top Seal

7 Blade Insert

8 Set Screw (Qty 2 Req'd)

11” 5000 and 10,000

645011-03-00-01

645009-01-00-01

046910-04-00-01

046751-04-00-01

046752-04-00-01

644217-01-00-01

645010-01-00-01

644582-01

13-5/8” 5000 and 10,000

644781-01-00-01

644780-01-00-01

644435-01-00-01

046751-01-00-02

046752-01-00-02

644223-01-00-01

644581-01-00-01

644582-01

13-5/8” 15,000

2163019-01-01

2163017-01-01

644435-01-00-01

046751-05-00-01

046752-05-00-01

644226-01-00-01

216481-01

644582-01

18-3/4” 10,000

2010186-01

2010187-01

2010192-01

2010191-01

2010190-01

2010193-01

2010182-01

644524-01

BOP Bore Size and Working Pressure (psi)

9 Lower Ram Subassy

10 Ram

11 Packer

12 Packer

13 Top Seal

14 Blade Insert

15 Pin (Qty 2 Req'd)

11” 5000 and 10,000

645011-04-00-01

645009-02-00-01

046751-04-00-01

046752-04-00-01

644217-01-00-01

645010-02-00-01

200231

13-5/8” 5000 and 10,000

644781-02-00-01

644780-02-00-01

046751-01-00-02

046752-01-00-02

644223-01-00-01

644581-02-00-01

200231

13-5/8” 15,000

2163019-02-01

2163018-01-01

046751-05-00-01

046752-05-00-01

644226-01-00-01

644581-02-00-01

200231

18-3/4” 10,000

2010186-02

2010188-01

2010191-01

2010190-01

2010193-01

2010183-01

200231

Severe Service U, UL and UM BOP H2S Shearing Blind Ram Part Numbers BOP Bore Size and Working Pressure (psi)

1 Upper Ram Subassy

2 Ram

3 Blade Packer

4 Packer

5 Packer

6 Top Seal

7 Blade Insert

8 Set Screw (Qty 2 Req'd)

11" 10,000

645011-01-00-01

645009-01-00-01

644834-04-00-01

2164284-04

2164285-04

644703-01-00-01

645010-01-00-01

644582-01

13-5/8” 5000 and 10,000

644781-03-00-01

644780-01-00-01

644834-01-00-01

645427-01-00-01

645428-01-00-01

644707-01-00-01

644581-01-00-01

644582-01

13-5/8” 15,000

2163019-01-02

2163017-01-01

644834-01-00-01

644832-01-00-01

644833-01-00-01

644709-01-00-01

2164281-01

644582-01

18-3/4" 10,000

2010186-01-01

2010187-01

2010192-02

644911-02

644912-02

2010193-02

2010182-01

644524-01

BOP Bore Size and Working Pressure (psi)

9 Lower Ram Subassy

10 Ram

11 Packer

12 Packer

13 Top Seal

14 Blade Insert

15 Pin (Qty 2 Req'd)

11" 10,000

645011-02-00-01

645009-02-00-01

2164284-04

2164285-04

644703-01-00-01

645010-02-00-01

200231

13-5/8” 5000 and 10,000

644781-04-00-01

644780-02-00-01

645427-01-00-01

645428-01-00-01

644707-01-00-01

644581-02-00-01

200231

13-5/8” 15,000

2163019-02-02

2163018-01-01

644832-01-00-01

644833-01-00-01

644709-01-00-01

644581-02-00-01

200231

18-3/4" 10,000

2010186-02-01

2010188-01

-

644911-02

644912-02

2010193-02

2010183-01

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

61

© 2006 Cameron International Corporation

U, UL & UM BOP DS Shearing Blind Ram

U BOP DS Shearing Blind Ram BOP Size and Working Pressure (psi)

Description and Item Number 1* Upper Ram Assembly

2* Body

3* Side Packer

4* Side Packer

5* Blade Seal

6* Blade Seal

11” 5000 and 10,000

645078-01-00-04

645079-01-00-04

645080-02-00-01

645080-01-00-01

645031-02-00-01

645031-02-00-01

13-5/8” 5000 and 10,000

645026-01-00-04

645027-01-00-04

2010985-01

2010985-02

2010986-01

2010986-02

7** Lower Ram Subassembly

8** Body

9** Side Packer

10** Side Packer

11*** Top Seal (2 Required)

11” 5000 and 10,000

645078-02-00-04

645079-02-00-04

645080-02-00-01

645080-01-00-01

644217-02-00-01

13-5/8” 5000 and 10,000

645026-02-00-04

645027-02-00-04

2010985-01

2010985-02

645033-01-00-01

BOP Size and Working Pressure (psi)

*Part of Upper Ram Assembly **Part of Lower Ram Assembly ***Part of Upper and Lower Ram Assemblies

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

62

© 2006 Cameron International Corporation

ISR Shearing Blind Ram Interlocking Shear Ram (ISR) is available for the U type BOP line. The ISR rams provide an improved shearing capacity alternative to the standard SBR rams, and should only be used when the standard rams cannot handle the desired shearing load. Since the geometry of the ISR ram incorporates a “V” shape and is designed as wide as possible, it can shear multiple strings and drill pipe as large as 6-5/8” OD. Also, ISR rams do not have to fold over the lower fish. This means less force is required to shear and, by leaving the fish open, kill mud can be pumped down the severed drill string. The interlocking mechanism incorporated in the ISR means that these rams can be utilized in an oversized cavity without fear of a leak at low wellbore pressures.

10 12 5

4

7

9

2

3

11

6

SD 034603

U and UM BOP ISR Shearing Blind Ram BOP Bore Size and Working Pressure (psi) 13-5/8” 3000, 5000 and 10,000 BOP Bore Size and Working Pressure (psi) 13-5/8” 3000, 5000 and 10,000

Description and Item Number Upper Ram Subassembly

Body

Side Packer

Side Packer

Top Seal

Blade Seal (1)

Blade Seal (1)

2164775-01

2164773-01

*2010985-01

*2010985-02

645033-01-00-01 (**2231241-01)

*2010986-01

*2010986-02

Lower Ram Subassembly

Body

Side Packer

Side Packer

Top Seal

2164776-01

2164774-01

*2010985-01

2010985-02

645033-01-00-01 (**2231241-01)

*Cameron Blade and Side Packers qualify to API 16A, 2nd Edition Appendix C high temperature verification test requirements and success fully complete Cameron required additional 8 hour hold test at 250 degrees F. **High Temp Top Seal

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

63

© 2006 Cameron International Corporation

U, UL and UM BOP DSI and DVS Shear Rams Dual string interlocking (DSI) shear rams and double V shear (DVS) rams are also available for the U, UL and UM BOPs. The interlocking feature of these rams provides the capability of shearing wireline and braided cable with zero tension in the line, while still maintaining a seal. The blades are interlocked by using pockets in the lower ram and arms on the upper ram to prevent any gap between blade surfaces. DSI rams are similar to standard DS shear rams except for the interlock feature. DSI shear rams are capable of shearing tubing, small pipe, braided cable, slickline and solid sinker bar. DVS rams are similar in design to the standard shearing blind rams except that both blades are V shaped and interlocked. The DVS rams are capable of shearing tubing, small pipe, braided cable and slickline.

Top Seal

Side Packer Upper Shear Ram Upper Ram Body

Side Packer Lower Shear Ram Lower Ram Body

Blade Seal Upper Shear Ram

Dual String Interlocking (DSI) Shear Rams

Top Seal

Lower Ram Body

Upper Ram Body

Blade Packer Side Packer

Double V Shear (DVS) Shear Rams SD 034613

TC1001-06

64

© 2006 Cameron International Corporation

U, UL and UM BOP Variable Bore Rams (VBR™ and VBR-II™) The Cameron VBR-II is the next generation of the highly popular Cameron variable bore ram (VBR) packer. The VBR-II accommodates a range of pipe sizes and may be used in existing Cameron variable bore rams. The VBR-II seals on a range of drill pipe sizes as well as hexagonal kellys and provides uniform sealing pressure with virtual elimination of extrusion paths. As indicated in the chart below, the VBR-II is the standard VBR in most common sizes. In sizes where the VBR-II is not specified in the chart, the popular Cameron VBR is the standard offering. VBR-II packers for other size BOPs and other pipe size ranges are available upon request. U, UL and UM BOP Variable Bore Ram Part Numbers BOP Size and Working Pressure (psi)

Pipe Size Range

Ram Subassembly

Ram Body

Packer

Top Seal

7-1/16” 3000, 5000, 10,000 and 15,000

3-1/2” to 2-3/8”

615066-01

615065-01

614616-02

644214-02-00-01

7-1/16” 3000, 5000, 10,000 and 15,000

4” to 2-7/8”

644901-01

614605-01

614616-02

644214-02-00-01

11” 3000, 5000 and 10,000 VBR-II

5” to 2-7/8”

645360-01

644836-01

644926-02

644217-01-00-01

11” 15,000

5” to 2-7/8”

2010465-01

2010463-01

2010464-01

2010453-02

13-5/8” 3000, 5000 and 10,000 VBR-II

7” to 4-1/2”

046675-01

046671-01-00-02

644924-03

644223-02-00-01

13-5/8" 3000, 5000 and 10,000 VBR-II

5-7/8" to 3-1/2"

2164664-01

2164404-01

2164599-01

644223-02-00-01

13-5/8” 3000, 5000 and 10,000 VBR-II

5-1/2” to 3-1/2”

2163945-01

2011438-01

645089-02-00-01

644223-02-00-01

13-5/8” 3000, 5000 and 10,000 VBR-II

644223-02-00-01

5” to 2-7/8”

645166-01

644744-01-00-04

645089-02-00-01

13-5/8” 15,000

7” to 5”

614104-01

614146-01

644924-02

644226-02-00-01

13-5/8" 15,000

5-7/8" to 3-1/2"

614129-03-00-02

644745-03-00-02

645089-03

644226-02-00-01

13-5/8” 15,000

5” to 3-1/2”

614129-01

644745-01

644921-01

644226-02-00-01

16-3/4” 3000 and 5000

7” to 3-1/2”

046676-01

046672-01

644920-01-00-01

644229-01-00-01

16-3/4" 10,000

7" to 5"

046676-01

046672-01

644920-01-00-01

644229-01-00-01

16-3/4” 10,000

5” to 2-7/8”

2163175-01

644746-01-00-01

645128-01-00-01

644229-02-00-01

16-3/4” 10,000

5-1/2” to 3-1/2”

2164605-01

2164603-01

645128-01-00-01

644229-02-00-01

18-3/4” 10,000 VBR-II

7-5/8” to 3-1/2”

046677-01

046673-01

644927-02

644232-03-00-01

21-1/4” 5000 and 10,000

5-7/8” to 2-7/8”

2164444-01

2164408-01

2164423-01

2164440-01

U, UL and UM BOP Extended Range High Temperature VBR-II BOP Size and Working Pressure 13-5/8" 3000, 5000 and 10,000

Pipe Size Range

Ram Subassembly

Ram Body

Packer

Top Seal

5-7/8" to 3-1/2"

2164806-01

2164404-01

2164765-01

2164807-01

Note: For additional information, refer to Cameron Information Sheet 02-001

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

65

© 2006 Cameron International Corporation

U, UL and UM BOP FLEXPACKER™ and FLEXPACKER-NR™ The Cameron Flexpacker ram is the latest development in multiple-bore sealing. Each Flexpacker ram is designed to close and seal around several diameters of tubing and pipe. The Cameron Flexpacker-NR is a narrow range variable bore ram packer designed for use with tapered drill strings. These packers are designed to fit standard fixed bore Cameron pipe rams.

FLEXPACKER Sizes and Part Numbers Bore Size and Working Pressure (psi)

Pipe Size Range

Packer Part Number

Top Seal Part Number

11” 3000, 5000 and 10,000

2-3/8” to 3-1/2”

*2011740-01

644217-01-00-01

13-5/8” 3000, 5000 and 10,000

2-3/8” to 3-1/2”

*2011716-01

644223-01-00-01

18-3/4” 10,000

2-7/8” to 5”

645346-01

644232-04

20-3/4” 3000

5” to 7”

645353-01

2163621-01

21-1/4” 2000

5” to 7”

645353-01

2163621-01

*Flexpacker NR

FLEXPACKER-NR Sizes and Part Numbers BOP Size and Working Pressure (psi)

Pipe Size Range

Part Number

11” 3000, 5000 and 10,000

2-3/8” x 3-1/2”

2011740-01

11” 3000, 5000 and 10,000

3-1/2” x 5”

2163445-01

13-5/8” 3000, 5000 and 10,000

2-3/8” x 3-1/2”

2011716-01

13-5/8” 3000, 5000 and 10,000

3-1/2” x 5”

2011673-01

13-5/8” 3000, 5000 and 10,000

5” x 6-5/8”

2011688-01

18-3/4” 10,000

5” x 6-5/8”

2011907-01

18-3/4” 10,000

3-1/2” x 5”

2011701-01

U, UL and UM BOP Rams for Multiple Completions Cameron offers non-sealing centralizing rams and companion subsea dual rams for use with two strings. For more information on these rams, please contact your local Cameron representative.

TC1001-06

66

© 2006 Cameron International Corporation

Inserted Packers The Cameron Inserted Packer for stripping/snubbing service is designed with a field replaceable, wear-resistant, non-rotating insert block. The insert block is fabricated from a specially formulated ultra-high molecular weight polyethelyne (UHMW-PE) which extends service life. The insert block is designed to be self-locking in the packer and should not require screws or other fasteners to hold it in place. The Cameron design eliminates the major causes of failure for inserted packers using semicircular inserts held in place with screws, including rapid insert wear out and insert rotation resulting in permanent packer damage.

Inserted Packer Sizes and Part Numbers BOP Size and Working Pressure (psi)

Pipe Size

Packer Assembly Part Number

Insert Part Number

Modified Packer Part Number

7-1/16” 15,000

2-3/8”

2010833-04

2010771-04

2010813-04

7-1/16” 15,000

2-7/8”

2010833-05

2010771-05

2010813-05

7-1/16” 15,000

3-1/2”

2010833-06

2010771-06

2010813-06

7-1/16” 15,000

4”

2010833-08

2010771-08

2010832-02

7-1/16” 15,000

4-1/2”

2010833-07

2010771-07

2010832-01

11” 10,000

2-3/8”

2010952-01

2010938-01

2010937-01

11” 10,000

2-7/8”

2010952-02

2010938-02

2010937-02

11” 10,000

3-1/2”

2010952-03

2010938-03

2010937-03

11” 10,000

4”

2010952-06

2010938-06

2010937-06

11” 10,000

4-1/2”

2010952-04

2010938-04

2010937-04

11” 10,000

5”

2010952-05

2010938-05

2010937-05

Initial Ordering – Order packer assembly, which includes plastic wear insert. When insert wears out and elastomer portion of packer is still in serviceable condition, order insert only. Modified packer part number is for reference only and is used to define the insert pocket machined in already molded packer. The insert is fit into this pocket. Insert Removal – Carefully pry worn insert from cavity in packer using appropriate tool such as large screwdriver. Once removed, install new insert using a soft mallet to drive the insert into the pocket. Note, the insert has a pair of locking devices on the side of the insert, which engages the packer elastomer and prevents insert loss. Insert Information – The insert is designed for use in flat plate packers only. They will not fit CAMRAM packers with top and bottom lipped plates.

TC1001-06

67

© 2006 Cameron International Corporation

CAMRAM 350 Packers and Top Seals for U BOPs CAMRAM 350 U BOP pipe ram packers and top seals are available for applications which require high temperature capabilities and greater H2S resistance than standard CAMRAM packers and top seals. CAMRAM 350 is available in all U BOP sizes in which standard CAMRAM packers and top seals are offered. CAMRAM packers in drill pipe sizes feature the Cameron patented lipped plate design. All packers also have chamfered ends on the top and bottom reinforcing plates to prevent ram bore scoring and reduce elastomer extrusion. All packers and top seals are molded using CAMLASTTM high performance elastomer from Cameron Elastomer Technology. U BOP CAMRAM 350 Part Numbers

Pipe Size (in.)

7-1/16” 3000-15,000 psi Top Seal 644701-01 Packer

11” 3000-10,000 psi

11” 15,000 psi

Top Seal

Top Seal

644703-01-00-01 644705-01 Packer

Packer

13-5/8” 3000-10,000 psi

13-5/8” 15,000 psi

16-3/4” 3000-10,000 psi

Top Seal

Top Seal

Top Seal

644707-01-00-01 644709-01-00-01 644711-01 Packer

18-3/4” 10,000 psi

20-3/4” 3000 psi 21-1/4” 2000 psi

Top Seal

Top Seal

644713-01-00-01 2164113-01

Packer

Packer

Packer

Packer

Blind

644700-01

644702-01

644704-01

644706-01-00-01

644708-01

644710-01

644712-01

2164105-01

2.375

644700-07

644702-06

644704-05

644706-06-00-01

644708-03

---

---

2164105-02

2.875

644700-08

644702-07

644704-06

644706-07-00-01

644708-04

644710-04

---

2164105-03

3.500

644700-09

644702-08

644704-07

644706-08-00-01 644708-05-00-01 644710-05

644712-04

2164105-04

4.000

644700-11

644702-10

644704-08

644706-10-00-01 644708-07-00-01 644710-06

---

2164105-05

4.500

644700-12

644702-11

644704-09

644706-11-00-01

644708-08

644710-07

---

2164105-06

5.000

644700-14

644702-14

644704-10

644706-14-00-01

644708-11

644710-09

644712-10

2164105-07

5.500

644700-15

644702-16

---

644706-16-00-01

644708-12

644710-10

644712-11

2164105-08

5.875

---

---

---

644706-29-00-01

---

644710-21

---

2164105-09

6.625

---

---

---

644706-18-00-01

644708-14

---

---

---

7.000

---

644702-20

---

644706-19-00-01 644708-15-00-01

---

---

---

7.625

---

644702-21

644704-15

644706-20-00-01

---

---

---

9.625

---

---

---

---

---

---

10.75

---

---

---

---

644708-21

---

---

---

13.375

---

---

---

---

---

644710-20

644712-20

2164105-17

644708-16

644706-24-00-01 644708-20-00-01

Note: 20” and 21” packers are “Severe Service” and are technically not CAMRAM 350. They do not incorporate the lipped plate design.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

68

© 2006 Cameron International Corporation

Type U, UL & UM BOP Ram - Optional Ram Wear Pads* Bore Size and Working Pressure

Left Part Number

Qty. Per Assembly

Right Part Number

Qty. Per Assembly ---

7-1/16" 3000 -15,000

2010071-02

2

Both Pads Included

11" 3000 - 10,000

2011278-01

2

Both Pads Included

11" 15,000

Screw Part Number

Qty. Per Assembly

---

---

644349-03

2

---

---

---

---

---

---

13-5/8" 3000 - 10,000

2011277-01

1

2011277-02

1

644349-01

4

13-5/8" 15,000

644348-04

2

Both Pads Included

---

644349-01

4

16-3/4" 10,000

2011281-03

1

2011281-04

1

644349-02

2

18-3/4" 10,000

2011280-01

1

2011280-02

1

2010506-01

2

20-3/4" 3000

2011281-05

1

2011281-06

1

644349-02

2

21-1/4" 2000

2011281-05

1

2011281-06

1

644349-02

2

21-1/4" 5000 - 10,000

2231763-01

1

2231764-01

1

644349-01

4

*Note: Ram Block Modification is required to enable the addition of the optional ram wear pads.

Hydraulic Bonnet Bolt System The hydraulic bonnet bolt tensioner eliminates frictional and torsional loads and reduces the time required for making up and breaking out bonnet bolts. • The hydraulic bonnet bolt is completely interchangeable with conventional bonnet bolts. It has a standard hexagonal head. An additional external thread mates with the internal threads in the operating head of the hydraulic bonnet bolt tensioner. The hydraulic bonnet bolt has its operating rod permanently secured in the machined hole in the center of the bolt. • The hydraulic bonnet bolt tensioner consists of a compact tensioner unit with a remote pump. Hydraulic Bonnet Bolt and Tensioner Part Numbers BOP Size and Working Pressure (psi)

Bonnet Bolt

Compact Tensioner Unit

11” 15,000 All

049795-13-10

614644-13-10*

13-5/8” 5000 Pipe Ram

049795-13-05

614644-13-05*

13-5/8” 5000 Shear Ram

049917-13-05

614644-13-05*

13-5/8” 10,000 Pipe Ram

049795-13-10

614644-13-10*

13-5/8” 10,000 Shear Ram

049917-13-10

614644-13-10*

13-5/8” 15,000 All

049795-13-15

614644-16-10**

16-3/4” 5000 Pipe Ram

049795-16-05

614644-16-05**

16-3/4” 5000 Shear Ram

049917-16-05

614644-16-05**

16-3/4” 10,000 All

049795-16-10

614644-16-10**

18-3/4” 10,000 All

049795-18-10

614644-18-10**

21-1/4” 5000 All

049795-21-05

614644-18-10**

*Use 25,000 psi WP pump, part number 645035-01 **Use 30,000 psi WP pump, part number 645035-02

TC1001-06

69

© 2006 Cameron International Corporation

Bonnet Seals and Connecting Rod Seals For applications where only bonnet and/or connecting rod seals are required, Cameron offers individually packaged components. Connecting rod seals are nitrile rubber. Bonnet seals beginning with 644197 are the newest design. When high temperature and/or high concentrations of H2S are expected, Cameron recommends the use of CAMLAST bonnet and connecting rod seals along with CAMRAM 350 packers and top seals.

U BOP CAMLAST Bonnet and Connecting Rod Seals BOP Size

Pressure Rating (psi)

Nitrile Bonnet Seal

CAMLAST

Conn. Rod Seal

Bonnet Seal

Conn. Rod Seal

7-1/16”

3000, 5000, 10,000 and 15,000

644197-01-00-01 212741-37-00-01 644573-01-00-01 645077-37-00-01

11”

3000, 5000 and 10,000

644197-02-00-01 212741-38-00-01 644573-02-00-01 645077-38-00-01

11”

15,000 Model 79

049272-03

212741-38-00-01

644898-01

645077-38-00-01

13-5/8” 3000, 5000 and 10,000

644197-03-00-01 212741-36-00-01 644573-03-00-01 645077-36-00-01

13-5/8” 15,000

644196-01-00-01 212741-36-00-01 644898-02-00-01 645077-36-00-01

16-3/4” 3000 and 5000 Model B

644197-04-00-01 212741-44-00-01

644573-04

645077-44

16-3/4” 10,000 Model II

644197-04-00-01 212741-44-00-01

644573-04

645077-44

18-3/4” 10,000

644197-05-00-01

644573-05

645077-60

20-3/4” 3000

046613-16-00-01 212741-36-00-01 046613-26-00-01 645077-36-00-01

21-1/4” 2000

046613-16-00-01 212741-36-00-01 046613-26-00-01 645077-36-00-01

21-1/4” 5000 and 10,000 Model 79

644197-08-00-01

011741-58

21-1/4” 7500 and 10,000 Model II

644197-07

011741-58

26-3/4” 2000 and 3000

212741-60

644573-08-00-01 645077-58-00-01 644573-07

645077-36-00-01

644197-09-00-01 212741-36-00-01 644573-09-00-01 645077-58-00-01

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

70

© 2006 Cameron International Corporation

Bonnet Seal Carriers for U, UM and U II BOPs The bonnet seal carrier is a bore-type sealing assembly which replaces the face seal used as the previous bonnet seal. Sealing capability is not dependant upon bonnet bolt torque. One seal is captured in a machined bore in the BOP body while the other seal is captured in a machined bore in the intermediate flange. The seal carrier was designed, developed and performance-verified for use in newly manufactured BOPs or as a replacement seal assembly for BOPs where either the BOP body or the intermediate flange requires weld repair on the sealing surfaces.

Part Numbers for Bonnet Seal Carriers for U, UM and U II BOPs Seal Carrier

Retainer Ring

Bonnet Seals

BOP Type

BOP Size

Qty.

Part Number

Qty.

Part Number

Qty.

Part Number

U, UM

11” 3000, 5000 and 10,000 psi

2

645464-02-00-01

2

702645-27-61

4

645484-02-00-01

U, UM

13-5/8” 10,000 psi

2

645507-01-00-02

2

702645-27-91

4

645509-01-00-01

U, UM

13-5/8” 15,000 psi

2

2010145-01

2

702645-27-71

4

2010146-01

U, UM

18-3/4” 10,000 psi

2

2010185-01

2

702645-28-31

4

2010184-01

U II

18-3/4” 10,000 and 15,000 psi

2

645464-01-00-02

2

645485-01-00-01

4

645484-01-00-01

TC1001-06

71

© 2006 Cameron International Corporation

TC1001-06

72

© 2006 Cameron International Corporation

U II BOP The Cameron U II BOP takes all of the features of the U BOP and adapts them for subsea use in the 18-3/4” 10,000 and 15,000 psi WP sizes. Like all other Cameron preventers, the rams in the U II BOP are pressure-energized. Wellbore pressure acts on the rams to increase the sealing force and maintain the seal in case of hydraulic pressure loss. Seal integrity is actually improved by increased well bore pressure. Other features of the U II BOP include:

• Internally ported hydraulic stud tensioning system ensures that stud loading is consistently accurate and even. • Bonnet seal carrier is available to eliminate the need for high makeup torque on bonnet studs and nuts. • Hydraulically operated locking mechanisms, wedgelocks, lock the ram hydraulically and hold the rams mechanically closed even when actuating pressure is released. The operating system can be interlocked using sequence caps to ensure that the wedgelock is retracted before pressure is applied to the open BOP. • A pressure balance chamber is used with the wedgelocks to eliminate the possibility of the wedgelock becoming unlocked due to hydrostatic pressure. Other features include hydraulically opening bonnets, forged body and a wide selection of rams to meet all applications. See pages 79-81 for rams available to fit the U II BOP.

TC1001-06

73

© 2006 Cameron International Corporation

U II BOP Hydraulic Control System

U II BOP Operating Data and Fluid Requirements Gallons to Open Pipe Rams (1 set)

Gallons to Close Pipe Rams (1 set)

Gallons to Open Bonnets (1 set)

Gallons to Close Bonnets (1 set)

Closing Ratio

Opening Ratio

Gallons to Unlock Wedgelock

Gallons to Lock Wedgelock

18-3/4” 10,000 psi

22.3

24.7

33.7

25.2

6.8:1

2.5:1

5.5

0.66

18-3/4” 15,000 psi

32.3

34.7

43.9

35.2

9.3:1

3.5:1

5.5

0.66

18-3/4” 15,000 psi with Cylinder

25.8

28.3

37.4

28.7

7.6:1

2.9:1

5.5

0.66

Bore Size and Working Pressure

U II BOP Accessories A high-pressure, hydraulic pump system is utilized with all Cameron U II BOPs for tensioning of the bonnet studs.

Part Number

TC1001-06

Description

645035-02

High Pressure, Hydraulic Pump Unit to Operate Hydraulic Bonnet Studs

615309-01

10-Foot High Pressure Hose Assembly for Hydraulic Pump Unit

615309-02

25-Foot High Pressure Hose Assembly for Hydraulic Pump Unit

708490-01

Male Half of Quick-Disconnect Coupling (One Required per Ram Cavity)

74

© 2006 Cameron International Corporation

U II BOP Dimensions The following designations refer to the dimensional drawing: A-1

Length - bonnets closed, with wedgelocks

A-2

Length - bonnets opened, with wedgelocks

B-1

Height - flanged

B-2

Height - clamp hubs

B-3

Height - studded x flanged

C

Width - no side outlets

D

Centerline of preventer to outlet flange or hub face. This distance is

D C

variable and must be determined per individual specifications. E-1

Centerline of side outlet (outlet below rams in double) to bottom A

flange face E-2

F

Centerline of side outlet (outlet below rams in double) to bottom hub face

G

F-1

Top of upper ram to top flange face

F-2

Top of upper ram to top hub face

G

Height of ram

H-1

Centerline of side outlet between rams to bottom flange face

H-2

Centerline of side outlet between rams to bottom hub face

J

Top of lower ram to bottom of upper ram

B

H

E

SD-034602

U II Blowout Preventer Dimensions and Weights BOP Size, Working Pressure and Body Style

A-1 (in.)

A-2 (in.)

B-1 (in.)

B-2 (in.)

B-3 (in.)

C (in.)

E-1 (in.)

E-2 (in.)

18-3/4” 10,000 Single

147.000

185.500

---

43.125

---

42.50

20.500

13.938

18-3/4” 10,000 Double

147.000

185.500

87.125

74.000

---

42.50

20.500

13.938

18-3/4” 15,000 Single

148.375

186.875

64.750

53.125

---

47.25

23.875

18.062

18-3/4” 15,000 Double

148.375

186.875

98.875

87.250

84.5

47.25

23.875

18.062

BOP Size, Working Pressure and Body Style

F-1 (in.)

F-2 (in.)

G (in.)

H-1 (in.)

H-2 (in.)

J (in.)

Weight (lbs.)

18-3/4” 10,000 Single

22.250

15.688

11.5

---

---

---

29,950

18-3/4” 10,000 Double

22.250

15.688

11.5

51.625

45.062

19.625

56,950

18-3/4” 15,000 Single

26.625

20.812

11.5

---

---

---

36,700

18-3/4” 15,000 Double

26.625

20.812

11.5

58.000

52.188

22.625

69,800

TC1001-06

75

© 2006 Cameron International Corporation

U II Blowout Preventer

TC1001-06

76

© 2006 Cameron International Corporation

U II BOP Part Numbers Item Number

Description

1

Body, Clamped

Qty. Single

Qty. Double

1

1

18-3/4” 10,000 psi 644102-02

18-3/4” 15,000 psi 615239-03

2

Intermediate Flange

2

4

615303-01

614722-01

3a

Bonnet

2

4

615302-01

---

3b

Bonnet

2

4

---

614621-01

4

Piston, Operating

2

4

615304-01

614623-01

4

Piston, Operating (Super Trim)

2

2

---

614623-04+

5

Piston, Ram Change Open

2

4

614618-02

614618-02

6

Piston, Ram Change Close

2

4

614618-01

614618-01

7

Cylinder, Ram Change

4

8

030273-16

030273-16

8

Stud, Bonnet

8

16

644612-18-10

644612-18-15

9

Piston, Bonnet Stud

8

16

615453-18-10

615453-18-15

10

Seal, Bonnet Stud

8

16

615452-18-10

615452-18-15

11

Nut, Bonnet Stud

8

16

644018-18-10

615451-18-15

12

Pin, Ram Guide

4

8

030313-11

030313-11

13

Lantern Ring

4

8

615332-02

615332-02

14

Ring Retainer, Backup Ring

2

4

614672-05

614672-05

15

Ring, Backup

2

4

610108-15

610108-15

16

Seal Ring, Connecting Rod

2

4

710671

710671

17

Retainer Plate

2

4

615210-01

615210-01

18

Retainer Ring

2

4

041008-08-00-52

041008-08-00-52

19

Seal, Bonnet

2

4

644169-01-00-01

644169-01-00-01

20

Connector, Tubing

2

4

707276

707276

21

Quick Disconnect, Male

2

4

708490-01

708490-01

22

Protective Cover

2

4

615627-01

615627-01

23

Cap Screw

6

12

702500-16-00-10

702500-16-00-10

24

Screw, Plastic Packing

2

4

005940-09

005940-09

25

Pipe Plug, Plastic Packing

2

4

005930-05-10

005930-05-10

26

Check Valve, Plastic Packing

2

4

M517988

M517988

27

Cap Screw, Intermediate Flange to Bonnet

32

64

702585-36-00-93

702585-36-00-93

28

Ring, Seal Secondary Connecting Rod

4

8

710670

710670

29

Stud, Wedgelock

12

24

044854-12

044854-12

30

Nut, Wedgelock

12

24

2709000-20-09

2709000-20-09

31

Retainer Ring, Tail Rod

2

4

033186-47

033186-47

32

Seal Ring, Tail Rod

2

4

707232

707232

33

Wear Ring, Ram Change Piston Head

4

8

614742-03

614742-03

+ Alternate parts for 18-3/4” 15,000 psi BOP assembly with operating cylinder.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

77

© 2006 Cameron International Corporation

U II BOP Part Numbers Item Number

Qty. Qty. Single Double

Description

18-3/4” 10,000 psi

18-3/4” 15,000 psi

34

O-Ring, Ram Change to Piston Body

4

8

702645-34-31

702640-34-31

35

O-Ring, Ram Change Cylinder to Body

4

8

702645-44-21

702645-44-21

36

O-Ring, Ram Change Cylinder to Int. Flange

4

8

702645-44-01

702645-44-01

37

Bearing Gland, Intermediate Flange

8

16

615727-01

615727-01

38

Seal Ring, Ram Change Piston Rod to Int. Flg.

4

8

707233

707233

39

Connector, Tubing

2

4

707159

707159

40

Retainer Ring, Lip Seal Tailrod

2

4

614672-04

614672-04

41

Gland, Bleeder

6

12

017454-08

017454-08

42

Plug, Bleeder

6

12

017454-09

017454-09

43

Lifting Eye

2

2

011849

011849

44

Seal Ring, Ram Change Piston Head

4

8

707231

707231

45

Wear Ring, Operating Piston

2

4

049223-16

049223-18

45

Wear Ring, Operating Piston

2

4

---

049233-19+

46

Lip Seal, Operating Piston

2

4

710545

710546

46

Lip Seal, Operating Piston

2

4

---

710851+

47

O-Ring

*

**

2708812-02

702645-47-11

48

Cylinder, Operating

2

--

030274-15

---

48

Cylinder, Operating

2

--

---

644613-01+

49

Bearing Retainer Ring, Seal

4

8

614348-10

614348-10

50

Plastic Packing

10

20

007650-25

007650-25

51

Ring, Seal Operating Piston

2

4

710640

710640

52

Ring, Backup

2

4

610108-28

610108-28

53

Check Valve, Weep Hole

--

--

709493

709493

54

Wedgelock w/Pressure Balance Chamber (RH)

2

4

615402-01

615402-01

54

Wedgelock w/Pressure Balance Chamber (LH)

2

4

615402-02

615402-02

55

O-Ring (Not Shown)

2

4

---

702645-46-91+

* 4 required for 18-3/4” 10,000 psi BOP; 2 required for 18-3/4” 15,000 psi BOP. ** 8 required for 18-3/4” 10,000 psi BOP; 4 required for 18-3/4” 15,000 psi BOP. + Alternate parts for 18-3/4” 15,000 psi BOP assembly with operating cylinder.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

78

© 2006 Cameron International Corporation

U II BOP Pipe Rams Pipe rams are available for use in Cameron U II BOPs to fit all commonly used sizes of tubing, drill pipe, drill collar or casing within the ranges in the chart on this page. Cameron pipe rams include the following features:

• Cameron pipe rams are

• • • •

self-feeding and incorporate a large reservoir of packer rubber to ensure a long-lasting seal under all conditions. Ram packers lock into place and are not dislodged by well flow. Cameron U II pipe rams are suitable for H2S service per NACE MR-01-75. TM CAMRAM top seals are standard for all U II BOP pipe rams. TM CAMRAM 350 packers and top seals are available for high temperature service and for service in which concentrations of H2S are expected. U II BOP Pipe Ram Part Numbers 18-3/4” 10,000 and 15,000 psi U II

Pipe Size

Top Seal: 645282-01-00-01 Assembly

Ram

Packer

Blind

644248-01

615407-01

644247-01-00-01

2.375”

644248-02

614770-01

644247-02-00-01

2.875”

644248-03

614770-02

644247-03-00-01

3.500”

644248-04

2724032-01

644247-04-00-01

3.500” Aluminum

644248-05

614770-04

644247-05-00-01

4.000”

644248-06

614770-05

644247-06

4.500”

644248-07

644742-02

644247-07

4.500” Aluminum

644248-08

614770-07

644247-08

4.750”

644248-09

614770-08

644247-09

5.000”

644248-10

644742-03

644247-10-00-01

5.500”

6445248-11

614770-10

644247-11-00-01

5.875”

644248-23-00-01

614770-23

644247-23-00-01

6.000”

644248-12

614770-12

644247-12-00-01

6.625”

644248-13

614770-13

644247-13-00-01

7.000”

644248-14

614770-14

644247-14

7.625”

644248-15

614770-15

644247-15-00-01

8.625”

644248-16

614770-16

644247-16-00-01

9.000”

644248-17

614770-17

644247-17-00-01

9.625”

644248-18

614770-18-00-02

644247-18-00-01

10.750”

644248-19

614770-19

644247-19-00-01

13.375”

644248-21

614770-25

644247-21-00-01

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

79

© 2006 Cameron International Corporation

U II BOP Variable Bore Rams One set of Cameron variable bore rams seals on several sizes of pipe or hexagonal kelly. Variable bore rams are available in the size ranges listed in the chart below. All rams listed are suitable for H2S service per NACE MR-01-75. CAMRAM packers and top seals are standard for all U II BOP variable bore rams. The variable bore ram packer contains steel reinforcing inserts similar to those in the Cameron annular BOP packer. The inserts rotate inward when the rams are closed so the steel provides support for the rubber which seals against the pipe.

U II BOP Variable Bore Ram Part Numbers BOP Size and Working Pressure

Pipe Size Range

Assembly

Ram Body

Packer

Top Seal

18-3/4” 10,000 psi

7.625” to 3.500”

614879-01

614846-01

644918-01-00-01

645282-01-00-01

18-3/4” 10,000 psi

5.000” to 2.875”

644919-01-00-01

644246-02-00-01

18-3/4” 15,000 psi

7.625” to 5.000”

614879-01

614846-01

644918-01-00-01

645282-01-00-01

18-3/4” 15,000 psi

5.000” to 3.500”

614878-01

614748-01

644919-01-00-01

644246-02-00-01

614878-01-00-01 644748-01-00-01

Bonnet Seals and Connecting Rod Seals For applications where only bonnet and/or connecting rod seals are required, Cameron offers individually packaged components.

Bonnet Seal and Connecting Rod Seal Part Numbers Temperature Range Normal (Up to 250oF) o

High (Up to 350 F)

Bonnet Seal

Connecting Rod Seal

644169-01-00-01

710671

644169-03

711871

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

80

© 2006 Cameron International Corporation

U II BOP Shearing Blind Rams Cameron shearing blind rams shear the pipe in the hole, then bend the lower section of sheared pipe to allow the rams to close and seal. Shearing blind rams can be used as blind rams during normal drilling operations. Features of shearing blind rams include: • Large frontal area on the blade face seal reduces pressure on the rubber and increases service life. • Cameron SBRs can cut pipe numerous times without damage to the cutting edge. • The single-piece body incorporates an integral cutting edge. • CAMRAMTM top seals are standard for all U II BOP shearing blind rams. • H2S SBRs are available for critical service applications and include a blade material of hardened high alloy suitable for H2S service.

U II BOP Shearing Blind Ram Assemblies Item

Description

U II BOP H2S Shearing Ram Assemblies

18-3/4” 10,000 and 15,000 psi

Item

Description

18-3/4” 10,000 and 15,000 psi

1

Upper Ram Assembly

2010214-01-01

1

Upper Ram Subassembly

2

Ram

2010216-01-01

2

Ram

644759-03 644752-01-00-01

3

Blade Packer

046910-05-00-01

3

Blade Packer

046910-05-00-01

4

Side Packer

615567-01-00-01

4

Side Packer

615567-01-00-01

5

Side Packer

615568-01-00-01

5

Side Packer

615568-01-00-01

6

Top Seal

645282-01-00-01

6

Top Seal

645282-01-00-01

*

Wear Pad

2011276-01

7

Blade Insert

644519-03

*

Wear Pad

2011276-02

8

Cap Screw

644524-01

*

Screw

644349-01

9

Lower Ram Subassembly

644759-04

7

Lower Ram Assembly

2010215-01-01

10

Ram

644752-02-00-01

8

Ram

2010217-01-01

11

Side Packer

615567-01-00-01

9

Side Packer

615567-01-00-01

12

Side Packer

615568-01-00-01

10

Side Packer

615568-01-00-01

13

Top Seal

645282-01-00-01

11

Top Seal

645282-01-00-01

14

Blade Insert

644519-02

*

Wear Pad

2011276-01

15

Spirol Pin

200231

*

Wear Pad

2011276-02

*

Screw

644349-01

* Not Shown

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

81

© 2006 Cameron International Corporation

CAMRAM High Temp Shearing Blind Ram Blade and Side Packers Item 3 4 5 6

Description Blade Packer, High Temperature Left Side Packer, High Temperature Right Side Packer, High Temperature Top Seal, High Temperature

18-3/4” 10,000 and 15,000 psi 644904-01 644905-01 644905-02 645246-01

CAMRAM 350 Packers and Top Seals for U II BOPs CAMRAM 350 U II BOP pipe ram packers and top seals are available for applications which require higher temperature capabilities than standard CAMRAM packers and top seals. CAMRAM 350 is available in all U II BOP sizes in which standard CAMRAM packers and top seals are available.

U II CAMRAM 350 Part Numbers 18-3/4” 10,000 and 15,000 psi Top Seal 645246-01 Description Part Number Packer 644714-01 Packer 644714-02 Packer 644714-03 Packer 644714-04 Packer 644714-10 Packer 644714-11 Packer 644714-13

Pipe Size Blind 2.375” 2.875” 3.500” 5.000” 5.500” 6.625”

UII BOP Rams - Optional Wear Pads Bore Size & Working Pressure (psi)

Left Part Number

Qty. Per Assy.

Right Part Number

18-3/4" 10,000 -15,000

2011276-01

1

2011276-02

Qty Qty Screw Per Assy. Part Number Per Assy. 1

644349-01

4

Note: Ram blocks may require modification in order to utilize the wear pads. Consult your local Cameron representative.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

82

© 2006 Cameron International Corporation

T BOP The Cameron T blowout preventer offers a unique combination of benefits including safety, economy, reliability, extended service life, reduced height and fast and easy service. Side ram removal on the T BOP permits reduced stack height and facilitates change-out of rams and packers. Sliding the rams to the side simplifies access and handling and reduces vertical clearance requirements. The T BOP is available in a modular design which greatly reduces stack height. The design is possible because the side ram removal feature of the T BOP allows for construction of a BOP stack with virtually no extra space between BOP body cavities. Each BOP body or module has only a slightly raised face and gasket prep. The design of the T is based on Cameron’s experience with the highly successful U and U II ram-type BOPs and combines much of this proven technology including:

• Metal-to-metal bonnet gaskets increase the safety and reliability in critical service • • • • •

applications. Hydraulic stud tensioning ensures that stud loading is consistently accurate and even. Hydraulically operated locking mechanisms, ST Locks, act directly on the operating piston tailrod and are interlocked by sequence caps to ensure that the locks are unlocked/opened before the BOP is opened. Bonnet studs instead of bonnet bolts reduce the need to make and break threads in the BOP body. Most operating system seals can be replaced with the bonnet in the ram change position without removing the bonnets. The standard T BOP has a large enough piston area to shear all commonly used sizes and grades of drill pipe.

Other features include hydraulically opening bonnets, forged body and a wide selection of rams to meet all applications. See pages 114-120 for rams available to fit the T BOP.

TC1001-06

83

© 2006 Cameron International Corporation

T BOP Accessories A high-pressure, hydraulic pump system is utilized with all Cameron T BOPs for tensioning of the bonnet studs.

Part Number

Description

645035-02

High Pressure, Hydraulic Pump Unit to Operate Hydraulic Bonnet Studs

615309-01

10-Foot High-Pressure Hose Assembly for Hydraulic Pump Unit

615309-02

25-Foot High-Pressure Hose Assembly for Hydraulic Pump Unit

708490-01

Male Half of Quick-Disconnect Coupling (One Required per Ram Cavity)

T BOP Hydraulic Control System The T blowout preventer is designed so that hydraulic pressure opens and closes the rams and provides a means for side ram removal. Ram opening pressure opens the rams and closes the bonnets after ram change-out. The rams are pulled outward, close to the bonnets, before the bonnets begin moving towards the preventer body. This assures that the rams never obstruct the bore or interfere with pipe in the hole. Hydraulic pressure draws the bonnets tightly against the preventer body and the bonnet studs are hydraulically tensioned to hold the bonnets closed. Ram opening pressure is also used to automatically unlock the ST-locks. Ram closing pressure closes the rams. When the bonnet nuts are released, closing pressure opens the bonnets. When the bonnet has moved to the fully extended position, a ram removal tray is inserted and ram opening pressure brings the rams into the clear for removal. ST-locks are locked by applying pressure to the ST-lock lock port. This pressure wedges a piston-like assembly into position to ensure that the rams are locked in the closed position. An option is available where the locks are also locked automatically by installing a sequence valve in the system.

T BOP Operating Data and Fluid Requirements

Bore Size and Working Pressure

Gallons to Open Pipe Rams (1 set)

Gallons to Close Pipe Rams (1 set)

Gallons to Open Bonnets (1 set)

Gallons to Close Bonnets (1 set)

Closing Ratio

Opening Ratio

Gallons to Unlock ST Locks (1 set)

Gallons to Lock ST Locks (1 set)

13-5/8” 10,000 psi

12.9

13.9

15.43

13.75

8.6:1

4.3:1

---

---

18-3/4” 15,000 psi

22.4

24.3

27.63

24.64

6.7:1

3.1:1

3.42

3.41

TC1001-06

84

© 2006 Cameron International Corporation

T BOP Dimensions Both the 13-5/8” 10,000 psi WP and the 18-3/4” 15,000 psi WP TBOPs are available in single, double and modular configurations. In addition, end preparations can be API flange, clamp hub or studded connections. The following designations refer to the T BOP dimensional drawings on the next page: A-1 A-2 A-3 A-4 B-1 B-2 B-3 B-4 C D

Length - bonnets closed, with ST-locks Length - bonnets opened, with ST-locks Length - bonnets closed, locking screws locked Length - bonnets opened, locking screws unlocked Height - flanged Height - clamp hubs Height - studded x flanged Height - modular Width - no side outlets Centerline of preventer to outlet flange or hub face. This distance is variable and must be determined per individual specifications. Top of preventer to centerline of outlet - flanged Top of preventer to centerline of outlet - Cameron clamp hubs Top of preventer to centerline of outlet - studded x flanged Top of preventer to centerline of outlet - modular Top of upper ram to top flange face Top of upper ram to top hub face Top of upper ram to studded face Top of upper ram to modular face Height of ram Centerline of upper outlet to centerline of lower outlet Centerline of upper ST-lock (or locking screw) to centerline of lower ST-lock (or locking

E-1 E-2 E-3 E-4 F-1 F-2 F-3 F-4 G H J screw)

13-5/8” 10,000 psi WP T BOP Dimensions Style

A-3

A-4

B-1

B-2

B-3

Single

124”

175.6”

43.6”

34.4”

33.5”

Double

124”

175.6”

68.2”*

59.0”*

58.1”*

B-4

C

E-1

E-2

23.3” 32” 26.7” --

32” 26.7”

E-3

E-4

F-1

F-2

F-3

F-4

G

H

J

Weight

22.1” 16.6” 16.6”

18”

13.4” 7.9” 7.9” 7.5” 24.6”* 24.6”

15,500 lb

22.1” 16.6”

18”

13.4” 7.9”

27,650 lb

--

--

7.5” 24.6”* 24.6”

18-3/4” 15,000 psi WP T BOP Dimensions Style

A-1

A-2

B-1

B-2

B-3

B-4

C

E-1

E-2

E-3

E-4

Single

177”

217”

64.2”

53”

49”

32.1”

47”

40.6”

35.1”

25.6”

24.6”

Double 177”

217”

98.3”*

87”*

83.1”*

--

47”

40.6”

35.1”

25.6”

--

TC1001-06

85

F-1

F-2

F-3

F-4

G

H

J

Weight

26.4” 20.8” 11.3” 10.3” 11.5”

34”*

34”

44,000 lb

26.4” 20.8” 11.3” 10.3” 11.5”

34”*

34”

85,000 lb

© 2006 Cameron International Corporation

C A-3 (Bonnets Closed) A-4 (Bonnets Opened)

D

F E G B

J H

C A-1 (Bonnets Closed) A-2 (Bonnets Opened)

D

F E G J

B H

T BOP Dimensions SD 034608

TC1001-06

86

© 2006 Cameron International Corporation

13-5/8” 10,000 psi WP T BOP Part Numbers

13-5/8” 10,000 psi WP T BOP Component List and Part Numbers Item

Description

Qty

Part Number

1

Body (Typical)

1

2*

Plug

4

201026

3

TX Bonnet Gasket

2

644799-01

4

Screw, 12 Pt Cap

24

702585-14-00-10

5

Bonnet Stud

8

644652-01

6

Bearing Retainer

4

644653-01

7

Split Bearing

8

644654-01

8

Wear Ring

8

614742-10

9

Bonnet Subassembly, Right Hand

1

644797-01

10

Bonnet Subassembly, Left Hand

1

644797-02

11

Nut Subassembly

8

644616-02

12

Collar Subassembly

8

644789-01

13

O-Ring

4

702645-32-31

14*

Pipe Plug

4

K201024

15*

Pipe Plug

4

675029-49

16

Ram Guide Pin

4

644658-01

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

87

© 2006 Cameron International Corporation

13-5/8” 10,000 psi WP T BOP Bonnet Subassembly Part Numbers

13-5/8” 10,000 psi WP T BOP Bonnet Subassembly Parts List Item

Description

Qty

Part Number

Item

Description

Qty

Part Number

30

Bonnet

1

644630-01

59

Retaining Ring, Spirolox

1

018572-18

31

Liner, Operating Cylinder

1

644631-01

60

O-Ring, Size 360

1

702645-36-01

32

O-Ring

1

644768-02

61

Screw, 12 Pt Cap

2

702585-06-00-30

33

Operating Piston Subassembly

1

644791-01

62

Backup Ring

1

644771-01

34

Seal Ring

1

710410

63

Seal Ring

1

710369

35

Wear Ring

1

614742-08

64

Retainer Ring

1

644737-01

36

Ram Change Piston, Open

1

644637-01

65

Retaining Ring, Spirolox

1

708393

37

Ram Change Piston, Closed

1

644637-02

66

Locking Screw Housing

1

644734-01

38

Seal Ring

2

710505

67

Locking Screw

1

644733-01

39

Wear Ring

2

614742-09

68

O-Ring, Size 459

1

702645-45-91

40

Cylinder, Ram Change System

2

644640-01

69

Stud, Double Ended

4

644450-03

41

O-Ring, Size 336

2

702645-33-61

70

Nut

4

644792-01

42

Gland, Ram Change System

2

644641-01

71

Button

1

644635-01

43

Backup Ring

2

644381-06

72

Inner Seal, Hydraulic Bonnet Stud Piston

4

644651-01

44

Seal Ring

2

710504

73

Inner Seal, Hydraulic Bonnet Nut

4

644438-02

45

O-Ring, Size 341

2

702645-34-11

74

Outer Seal, Hydraulic Bonnet Nut

4

644439-02

46

Seal Retainer, Ram Change System

2

644642-01

75

Spacer Ring, Hydraulic Bonnet Stud

4

644650-01

47

Cylinder Head, Ram Change System

2

644643-01

76

O-Ring, Size 362

4

702645-36-22

48

O-Ring, Size 338

2

702645-33-81

77

Retaining Ring, Spirolox

4

033186-05

49

Insert, Bonnet Gasket

1

644644-01

78

Gland

2

017454-46

50

Screw, 12 Pt Cap

12

702585-14-00-26

79

Blind Plug

2

017454-36

51

Backup Ring

2

644381-05

80* Check Valve

1

709493

52

Seal Ring

1

710430

81* Bleeder Plug Assembly

1

640202-02

53

Seal Carrier

1

644726-01

82* High Pressure Plug

4

615684-02

54

O-Ring, Size 352

1

702645-35-21

83* O-Ring, Size 113

4

702645-11-31

55

Seal Ring

1

609745-14

84

Tubing Connector

1

707276

56

Backup Ring

1

644381-04

85

Male Quick-Disconnect

1

708490-01

57

Seal Ring

1

710429

58

Retainer Ring

1

644648-01

*Not Shown

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

88

© 2006 Cameron International Corporation

18-3/4” 15,000 psi WP T BOP Part Numbers

18-3/4” 15,000 psi WP T BOP Part Numbers Item

Description

Qty

Part Number

1

Body (Typical)

1

2

Plug

8

3

TX Bonnet Gasket Kit

4

644770-02

4

Screw, 12 Pt Cap

48

702585-14-00-10

5

Bonnet Stud

16

644362-03

6

Bearing Retainer

8

644361-01

7

Split Bearing

16

644360-01

8

Wear Ring

16

645363-01

201026

9

Bonnet Subassembly, Right Hand

2

644562-05

10

Bonnet Subassembly, Left Hand

2

644562-06

11

Nut Subassembly

16

644616-04

12

Collar

16

615707-03

13

O-Ring

8

702645-32-61

16

Ram Guide Pin

8

644399-01

17

Retaining Ring, Spirolox

16

711202

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

89

© 2006 Cameron International Corporation

18-3/4” 15,000 psi WP T BOP Bonnet Subassembly Part Numbers

Item

Description

Qty

Part Number

Item

Description

Qty

Part Number

30

Bonnet

1

644414-03

56

Spacer Ring, Connecting Rod

1

644355-01

31

Liner, Operating Cylinder

1

644470-01

57

Ret. Ring, Primary Conn. Rod Seal

1

644356-01

32

O-Ring, Size 387

1

702645-38-71

58

Retaining Ring, Spirolox

1

709503

33

Operating Piston Subassembly

1

644483-04

59

O-Ring, Size 453

1

702645-45-31

34

Seal Ring

2

709635

60

Seal Sub, Blind

2

644491-02

35

Wear Ring

1

614742-06

61

O-Ring, Size 214

4

702645-21-41

36

Ram Change Piston, Open

1

644301-01

62

Screw 12 Pt Cap

2

702585-06-00-42

37

Ram Change Piston, Close

1

644301-02

63

Stud, Double Ended

4

644450-01

38

Seal Ring

2

709632

64

Cap Nut

4

644447-01

39

Wear Ring

2

614742-05

65

ST-Lock Assembly

2

645021-01

40

Cylinder, Ram Change System

2

615685-01

69

Gland, Tubing

2

017454-46

41

O-Ring, Size 348

2

702645-34-81

70

Blind Plug

2

017454-36

42

Gland, Ram Change System

2

615711-01

71*

Valve, Check

1

709493

43

Backup Ring

2

644381-03

73

High Pressure Plug

4

615684-02

44

Seal Ring

2

709633

74

O-Ring, Size 113

4

702645-11-31

45

O-Ring, Size 428

2

702645-42-81

75

Connector, Tubing

1

707276

46

Seal Retainer, Ram Change System

2

615712-01

76

Male Quick-Disconnect

1

708490-01

47

Cylinder Head, Ram Change System

2

615713-01

77

Button

1

615706-01

48

O-Ring, Size 425

2

702645-42-51

78

Inner Seal, Hydraulic Bonnet Nut

4

644438-01

49

Insert, Bonnet Gasket

1

644358-03-00-01

79

Spacer Ring, Hydraulic Bonnet Stud

4

644359-01

50

Screw, 12 Pt Cap

12

702585-14-00-20

80

Outer Seal, Hydraulic Bonnet Nut

4

644439-01

51

Backup Ring

3

644381-02

81

Piston, Hydraulic Bonnet Stud

4

615709-01

52

Seal Ring

2

709631

82

O-Ring, Size 377

4

702645-37-71

53

Wear Ring

1

644443-01

83

Retaining Ring, Spirolox

4

709636

54

Backup Ring

1

644381-01

55

Seal Ring

1

709630

*Not Shown

High Temperature Connecting Rod Seal Part Numbers* Item

Description

52

Connecting Rod Seal

Part Number 712021

55

Connecting Rod Seal

712022

*Order both part numbers.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

90

© 2006 Cameron International Corporation

TL BOP The Cameron TL BOP product line is the result of an evolution of Cameron’s successful U, UII and T BOPs combined with custom features based on each customer’s specific requirements. All TL BOPs are based on a simplified design that eliminates the separate bonnet and intermediate flange design. The TL BOP features side ram removal resulting in a shorter BOP well-suited for rig designs with height constraints. Like all of Cameron’s BOPs, the TL includes hydraulically opening bonnets, forged body and a wide selection of rams to meet all applications. All TL BOPs feature:

• • • • •

Bonnet seal carrier eliminates the need for high make-up torque on bonnet studs and nuts. Bonnet studs rather than bonnet bolts eliminate the need to make and break threads in the BOP body. Side ram removal reduces stack height and simplifies ram change-out. Access caps on the ram change pistons enable easier access and bonnet removal. Most operating system seals can be replaced with the bonnet in the ram-change position without removing the bonnets because the operating cylinder and ram-change cylinders fit between the bonnet and end flange with tie-bolts holding the assembly together.

• • •

Piston area is large enough to shear most commonly used sizes and grades of drill pipe. Wear pads are included on the bottom of all TL BOP rams. Available in 13-5/8” 10,000 psi WP and 18-3/4” 5000, 10,000 and 15,000 psi WP sizes with many body configurations.

TL Custom Features:

•

Choice of manual and hydro-mechanical locking devices, including manual lock screws, wedgelocks (5000 psi WP only), ST-Locks or RamLocks .

• •

Choice of locking device operation/manual, semi-automatic or automatic operation. Choice of several styles of bonnets for increased shearing capabilities such as:

• •

•

Tandem Boosters to shear large, extra-heavy wall casing. Super Shear bonnets fitted with non-sealing super shear rams for shearing drill collars and large casing.

Inconel inlays for critical sealing components.

Due to the extensive variety of custom features, no TL BOP part numbers are included in this publication. Please refer to the operation and maintenance manual supplied with your TL BOP for specific replacement part numbers.

TC1001-06

91

© 2006 Cameron International Corporation

Reference Page 86

RAM Lock 3

2

5

6

7

11

1

15

14

Reference Page 94

ST Lock 4

Reference Page 98

Wedgelock

9

8

12

13

19

20

10

Reference Page 100

Manual Locking Screw

Reference Page 102

Super Shear

Reference Page 103

ST Lock Tandem Booster

TL BOP with Different Bonnet Assemblies SD 034630

TC1001-06

92

© 2006 Cameron International Corporation

TL BOP Assembly Components

Item

Qty Single

Qty Double

Description

1

1

1

Body

**2

8

16

Bonnet Stud (Tandem Booster uses different arrangement - See TB Bonnet)

3

8

16

Bonnet Cap Nut

4

2

4

Ram Guide Pin

5

2

4

Bonnet Seal Carrier

*6

4

8

Bonnet Seal

*7

2

4

Retainer Ring (Seal Carrier)

8

8

16

Pipe Plug, Threaded Hex Socket - N/A for MLS

*9

4

8

Seal Ring

10

1

2

Bonnet Subassembly, Right Hand

11

1

2

Bonnet Subassembly, Left Hand

12

1

1

Name Plate

13

1

1

Name Plate

14

***

***

Stud, Double Ended

15

***

***

Nut, Heavy Hex

16

***

***

Bushing (Not Shown)

17

1

1

Adhesive Primer, 4.50 oz. (Not Shown)

18

1

1

Adhesive, Loctite 277 (Not Shown)

19

***

***

Stud, Double Ended

20

***

***

Nut, Heavy Hex Accessory Items

1

1

Removal Tool, Bonnet Seal Carrier

2

2

Ram Tray Assembly

4

8

Bonnet Extension Rod - N/A for tandem Booster Expendable Items

4

8

Gasket Subassembly, AX

2

2

Gasket Subassembly, CX-18

1

1

Paste, #503 Molybdenum Disulfide 4.0 lb. Can

2

2

Adhesive, Loctite 242, 250 ml. Tube

1

1

Sealant, Thread-Loctite 567, 50 ml. Tube

1 Gal

1 Gal

Ram Lube, Chemola

1 Gal

1 Gal

Fluid, Hydraulic Equipment Preservation

* Included in seal kit ** Tandem Booster uses different Bonnet Stud arrangement - See Tandem Booster Bonnet *** Quantity based on bore size and working pressure

Item numbers shown in the catalog may or may not correspond to the item numbers shown in your rig books.

TC1001-06

93

© 2006 Cameron International Corporation

TC1001-06

94

© 2006 Cameron International Corporation

TL BOP Heights and Weights BOP Size and Working Pressure

Height Body Style

Weight (lbs)

Flange x Studded

Studded x Studded

Lock Screws Wedgelocks

ST-Locks

RamLocks

Super Shears

Tandem Boosters

13-5/8” 10,000 psi

Double

56.00”

---

23,651

---

---

---

N/A

N/A

18-3/4” 5000 psi

Single

33.50”

---

17,500

18,700

---

20,050

N/A

20,500 ****

18-3/4” 5000 psi

Double

58.00”

---

33,600

36,000

---

38,300

N/A

39,300 ****

18-3/4” 10,000 psi

Single

41.34”

27.00” ****

22,700

N/A

26,450

25,750

N/A

N/A

18-3/4” 10,000 psi

Double

65.98”

---

42,400

N/A

60,500

48,474

N/A

N/A

18-3/4” 15,000 psi

Single

49.03”

---

---

N/A

39,150

35,950

---

44,650 †

18-3/4” 15,000 psi

Double

83.22”

---

55,440*

N/A

74,800

68,400

70,025 *** 66,825 **

---

*Flange x Flange **With RamLocks and Super Shears ***With ST-Locks and Super Shears ****With RamLocks and Tandem Boosters † With ST-Locks Unless otherwise noted, all weights are for flanged x studded body styles

TL BOP End-to-End Lengths BOP Size and Working Pressure

Manual Lock Screws

Wedgelocks

ST-Locks

RamLocks

Super Shears

Tandem Boosters

Open

Close

Open

Close

Open

Close

Open

Close

Close

Open

Close

13-5/8” 10,000 psi

172.52”

43.02”

---

---

---

---

---

---

N/A

N/A

N/A

18-3/4” 5000 psi

207.00”

148.00”

180.03”

147.10”

---

---

187.75”

150.86”

N/A

219.25”

182.36”

18-3/4” 10,000 psi

---

---

---

---

202.95”

167.25”

187.51”

150.86”

N/A

N/A

N/A

18-3/4” 15,000 psi

228.50”

163.26”

N/A

N/A

215.59”

173.86”

197.64”

155.91”

151.89”

264.27” *

222.53” *

*With ST-Locks

TC1001-06

95

© 2006 Cameron International Corporation

RamLocks – Hydro-Mechanical Once the rams are in the closed position, the integral locking mechanism may be engaged. The RamLock operates on a similar principle to the wedgelock but uses an array of locking components. The design will accommodate pipe, shear and a full range of VBR applications. Available with manual, semi-automatic or fully automatic operation. Used for subsea applications. BOP Size and Working Pressure

Closing Volume (gal)

Opening Volume (gal)

Closing Ratio

Opening Ratio

18-3/4” 5000 psi

21.3

19.3

10.89:1

3.13:1

18-3/4” 10,000 psi

21.3

19.3

10.89:1

3.13:1

18-3/4” 15,000 psi

25.9

22.3

7.13:1

3.10:1

Note: 18-3/4” 5000/10,000 psi - RamLock Lock/Unlock 7.6 gal. Note: 18-3/4” 15,000 psi - RamLock Lock/Unlock 11 gal. 11 12

14 13 15 20

36 39 37 35 4

50 32

5 33 30 31 6

39

31 2

7 34

18

25

19

39 35 39

16

51

17

39

38 17

44 28

16

39

8 9 23

SD 034619

28 29 27 3 42 40 41 45 43 46 24 26 48 47

TL BOP RamLock Bonnet Subassembly

TC1001-06

96

© 2006 Cameron International Corporation

TL BOP RamLock Bonnet Subassembly Components Item

Qty/5K

Qty/10K

Qty/15K

Description

2

1

1

1

Bonnet

3

1

1

1

Operating Piston with RamLock Subassembly (See Page 90 for Exploded View)

4

1

1

1

Ram Change Piston (Open)

5

1

1

1

Ram Change Piston (Close)

6

2

2

2

Ram Change Cylinder

7

2

2

2

Ram Change Access Cap

*8

1

1

1

O-Ring

*9

1

1

1

Back-Up Ring

*11

1

1

1

Retaining Ring, Spirolox (Connecting Rod)

*12

1

1

1

Retainer Ring (Primary Connecting Rod)

*13

1

1

1

Back-Up Ring (Connecting Rod)

*14

1

1

1

Seal Ring (Primary Connecting Rod Seal)

*15

1

1

1

Ring Spacer (Connecting Rod)

*16

2

2

2

Seal Ring (Secondary Connecting Rod Seal)

*17

2

2

2

Back-Up Ring (Connecting Rod)

*18

1

1

1

Retainer Ring (Primary Connecting Rod)

*19

1

1

1

Retaining Ring, Spirolox (Connecting Rod)

*20

--

--

1

Wear Ring

23

1

1

1

Operating Piston Cylinder

24

1

1

1

Hydraulic RamLock Cylinder Head

25

6

8

8

Double-Ended Stud (Cylinder Head-to-Bonnet)

26

6

8

8

Cap Nut

*27

1

1

1

Seal Ring (Operating Piston Seal)

*28

1

1

2

O-Ring (Operating Cylinder and End Cap)

*29

1

1

1

Wear Ring (Operating Piston)

*30

2

2

2

Wear Ring (Ram Change Piston)

*31

4

4

4

O-Ring (Ram Change Cylinder)

*32

2

2

2

Seal Ring (Ram Change Piston)

*33

2

2

2

Seal Ring (Ram Change Piston)

* Included in Seal Kit

Item numbers shown in the catalog may or may not correspond to the item numbers shown in your rig book.

TC1001-06

97

© 2006 Cameron International Corporation

11 12

14 13 15 20

36 39 37 35 4

50 32

5 33 30 31 6

39

31 2

7 34

18

25

19

39 35 39

16

51

17

39

38 17

44 28

16

39

8 9 23

SD 034619

28 29 27 3 42 40 41 45 43 46 24 26 48 47

TL BOP RamLock Bonnet Subassembly

TC1001-06

98

© 2006 Cameron International Corporation

TL BOP RamLock Bonnet Subassembly Components (Continued) Item

Qty/5K

Qty/10K

Qty/15K

Description

*34

2

2

2

O-Ring (Ram Change Access Cap)

35

1

2

2

Lifting Eye

36

1

2

2

Tubing Gland (Bonnet and Cylinder Head)

37

1

2

2

Blind Plug (Bonnet and Cylinder Head)

38

1

1

1

Check Valve

39

9***

7***

7***

*40

2

2

2

Seal Ring (Cylinder Head)

*41

2

2

2

Hydraulic RamLock Seal Sleeve (Cylinder Head)

42

2

2

2

Seal Retainer for Lock Cylinder (Cylinder Head)

**43-46

1

1

1

Hydraulic Plumbing

47

24

24

32

Socket Head Cap Screw

48

1

1

1

Hydraulic RamLock End Cap (Cylinder Head)

*50

2

2

2

Bonnet Flange Bearing/Wear Ring

51

1

1

1

Blind Flange (Cylinder Head)

*52

1

1

--

O-Ring (End Cap)

****52A

1

1

1

Sequence Valve

**53

--

1

1

Thread Sealant

****54A

1

1

1

Subassembly, Blanking Plug, Top & Bottom, f/Sequence Valve F VBR & Shear Rams

Pipe Plug (2 Bonnet, 2 Cylinder Head, 1 Cap, 1 Lower Bonnet Drain Plug)

Expendable Items **

--

1

1

Paste #503 Molybdenum Disulfide (4 lb. Can) Optional Items

**

--

1

1

Seal Repair Kit (Parts for One Bonnet)

* Included in Seal Kit ** Not Shown *** Quantity varies according to the lock/bonnet configuration **** Optional Item

Item numbers shown in the catalog may or may not correspond to the item numbers shown in your rig book.

TC1001-06

99

© 2006 Cameron International Corporation

16 15 13 15 12 10 17 2 25 26 30

4 5

29 1

11

6

19 19

7 18

9

SD 034624

27 28

3 8

9 8

18-3/4” 5000 and 10,000 psi WP TL BOP RamLock Operating Piston Subassembly

TC1001-06

100

© 2006 Cameron International Corporation

TL BOP RamLock Operating Piston Subassembly 18-3/4” 5000 and 10,000 psi WP Item

Qty/5K

Qty/10K

Description

1

1

1

Secondary Piston

*2

1

1

Seal Ring

3

4

4

Whistle Piston

4

4

4

Sealing Shoulder Screw

*5

4

4

O-Ring

6

1

1

Main Piston

7

4

4

Lock Component (Main Piston with Keys and Screws)

8

8

8

Alignment Key (Main Piston)

*9

8

8

Socket Head Cap Screw

10

1

1

Piston Front Plate

*11

1

1

O-Ring (Front Plate)

12

16

16

Socket Head Cap Screw (Front Plate-to-Main Piston)

13

1

1

Rod Connection

(*)**14

1

1

Adhesive (Loctite 242 50cc Bottle)

*15

8

8

Socket Head Set Screw (Half Dog Rod-to-Front Plate) Optional

16

1

1

Button for Operating Piston (Connecting Rod)

17

2

2

Pipe-Threaded Hex Socket Plug (Front Plate)

18

1

1

Front Plate Stinger

*19

4

4

Seal Ring (Three-Function Stinger)

*21

1

1

Pip Ring

**22

1

1

Thread Sealant

25

1

1

Sleeve, Secondary Piston, Hydraulic Ram (Inside Item 6)

*26

1

1

Wear Ring (for Secondary Piston Sleeve)

27

1

1

Stop Plate, Secondary Piston (Inside Item 6)

28

12

12

Screw, Socket Head Cap

*29

1

1

Pip Ring (Secondary Piston)

*30

1

1

Seal Ring (Secondary Piston)

* Included in Seal Kit ** Not Shown Item numbers shown in the catalog may or may not correspond to the item numbers shown in your rig books.

TC1001-06

101

© 2006 Cameron International Corporation

16 15

10 17 11 19 19 18

13 15

5

12 17

1

SD 034620

3 6 9 8 2 4

7 8 9

18-3/4” 15,000 psi WP TL BOP RamLockOperating Piston Subassembly

TC1001-06

102

© 2006 Cameron International Corporation

TL BOP RamLock Operating Piston Subassembly 18-3/4” 15,000 psi WP Item

Qty/15K

Description

1

1

Secondary Piston

*2

1

Polypak

3

6

Whistle Piston

4

6

Sealing Shoulder Screw

*5

6

O-Ring

6

1

Main Piston

7

6

Lock Component (Main Piston with Keys and Screws)

8

12

Alignment Key (Main Piston)

*9

12

Socket Head Cap Screw

10

1

Piston Front Plate

*11

1

O-Ring (Front Plate)

12

16

Socket Head Cap Screw (Front Plate-to-Main Piston)

13

1

Front Plate Connecting Rod

(*)**14

1

Adhesive (Loctite 242 50 cc Bottle)

*15

8

Socket Head Set Screw (Half Dog Rod-to-Front Plate) Optional

16

1

Button for Operating Piston (Connecting Rod)

17

2

Pipe-Threaded Hex Socket Plug (Front Plate)

18

1

Front Plate Stinger

*19

4

Seal Ring (Three-Function Stinger)

21

1

Blanking Plug

**22

1

Thread Sealant

* Included in Seal Kit ** Not Shown Item numbers shown in the catalog may or may not correspond to the item numbers shown in your rig books.

TC1001-06

103

© 2006 Cameron International Corporation

ST-Locks – Hydro-Mechanical Once the rams are in the closed position, hydraulic pressure is used to move the locking wedge against the tailrod extension, an automatic clutch mechanism is engaged to mechanically hold the locking wedge in the lock position. Available with sequence caps to automatically lock and unlock prior to opening the rams. Designed for use with pipe, shear and VBR applications up to 6-5/8”. Used for subsea applications BOP Size and Working Pressure

Closing Volume (gal)

Opening Volume (gal)

Closing Ratio

Opening Ratio

18-3/4” 10,000 psi

24.6

23.4

6.7:1

3.1:1

18-3/4” 15,000 psi

24.6

23.4

6.7:1

3.1:1

Note: ST-Lock Lock 3.4 gal.

19

27

33

44

45

6

6

33

8

7

8

22

39

8

7

20

8

34

38

15

17

16

14

35

36

23

25

37

24

34

1

26

28

35

40

2

36

15

29

14

29

32

31

13

32

3

31

4

46

9

18

46

30

11

30

5

12

10

5

30

21

30

41

SD 034614

TL BOP ST Lock Bonnet Subassembly

TC1001-06

104

© 2006 Cameron International Corporation

TL BOP ST-Lock Bonnet Subassembly Components Item

Qty

Description

Item

Qty

Description

1

1

Bonnet

*27

1

O-Ring (Operating Piston)

2

1

Operating Piston Subassembly

*28

1

Wear Ring

3

1

Ram Change Piston (Open)

*29

2

Wear Ring (Ram Change Piston)

4

1

Ram Change Piston (Close)

*30

4

O-Ring (Ram Change Cylinder)

5

2

Ram Change Cylinder

*31

2

Seal Ring (Ram Change Piston Seal)

6

2

Ram Change Access Cap

*32

2

Seal Ring (Ram Change Piston Seal)

7

2

Hydraulic Bonnet Sub (Cylinder Head)

*33

2

O-Ring (Ram Change Access Cap)

8

8

O-Ring

34

2

Lifting Eye

*9

1

Retaining Ring, Spirolox (Connecting Rod)

35

2

Tubing Gland

*10

1

Retainer Ring (Primary Connecting Rod)

36

2

Blind Plug

*11

1

Back-Up Ring (Connecting Rod)

*37

1

Back-Up Ring (Connecting Rod) (for 15K only)

*12

1

Seal Ring (Primary Connecting Rod Seal)

38

1

ST Lock Assembly

*13

1

Ring Spacer (Connecting Rod)

39

1

Sequencing Valve Assembly

*14

2

Seal Ring (Secondary Connecting Rod Seal)

40

1

Check Valve

*15

2

Back-Up Ring (Connecting Rod)

41

8

12 Point Cap Screw

*16

1

Retainer Ring (Primary Connecting Rod)

42

5

Threaded Pipe Plug (Not Shown)

*17

1

Retaining Ring, Spirolox (Connecting Rod)

43

1

Threaded Pipe Plug (Not Shown)

*18

1

Wear Ring (for 15K only)

*44

1

O-Ring

19

1

Operating Piston Cylinder

*45

1

Back-Up Ring

20

1

Cylinder Head, Right Hand

46

2

Bearing, Bonnet Flange

20A

1

Cylinder Head, Left Hand

21

8

Double-Ended Stud

22

8

Heavy Hex Nut

*23

1

Seal Ring (Tail Rod)

*24

1

Back-Up Ring (Tail Rod)

*25

1

Retaining Ring, Spirolox (Tail Rod)

1

Paste, #503 Molybdenum Disulfide

*26

1

Seal Ring

1

Thread Sealant

Piping, ST-Lock w/Sequence Valve Optional Items 1

Operating Piston Subassembly w/Removable Tail Rod Seal Repair Kit Expendable Items

Note: Some Cylinders (19) use O-Rings (27) on each end and will not accept rings (44) and (45). * Included in Seal Repair Kit Item numbers shown in the catalog may or may not correspond to the item numbers shown in your rig books.

TC1001-06

105

© 2006 Cameron International Corporation

9

10

3 1 15

ST-Lock Assembly Components Item

Qty

1

1

Stem and Locking Wedge Assembly

2

1

Locking Cylinder

3

1

Brake Hub

4

1

Brake Ring with Dowel Pins

5

1

Unlock Piston

6

4

Spring

*7

1

O-Ring

8

1

Alignment Key Assembly

9

1

End Cap

*10

1

O-Ring

27 4

Description

*12

1

O-Ring

14

1

End Cap (Brake Piston End)

15

8

Socket Head Cap Screw

*16

1

O-Ring

*17

1

O-Ring

*18

1

O-Ring

*20

1

Bearing

22

1

Bearing Subassembly

26

1

Overhauling Nut

*27

1

Seal Ring

28

1

Sequence Cap Head

29

1

Sequence Cap Body

30

1

Sequence Cap Valve Poppet

31

1

Sequence Cap Seat

32

1

Spring

*33

1

O-Ring

*34

1

O-Ring

*35

1

O-Ring

*36

1

O-Ring

37

4

12 Point Cap Screw

7 6

12

18

20

2 8

14

36 29

22

34

35

32

31

30

26 33 17

28 37

5 16

* Included in Seal Repair Kit

ST Lock Assembly SD 034627

TC1001-06

106

© 2006 Cameron International Corporation

13 24

7

Sequencing Valve Subassembly Components 4

Item

Qty

Description

1

1

Poppet

6

2

1

Compression Spring

2

3

1

Valve Seat

4

1

Actuator

*5

1

O-Ring

*6

1

O-Ring

1

3

7

1

Liner

*8

2

O-Ring

5

9

1

Compression Spring

8

10

1

Cap

11

4

Hex Head Cap Screw

12

1

Body

*13

1

O-Ring

14

1

Balance Piston

15

1

Poppet Stop

*16

1

O-Ring

*17

1

O-Ring

*24

1

O-Ring

**

1

Sealant/Lubricant

12

14 16 17 8 9 15

10

*Included in Seal Repair Kit **Not Shown

11

Sequencing Valve SD 034597

TC1001-06

107

© 2006 Cameron International Corporation

Wegelocks – Hydro-Mechanical With the rams in the closed position, hydraulic pressure is used to close the wedgelocks. The wedgelocks’s self-locking taper acts against the tailrod extension to mechanically hold the rams closed, even when actuating pressure is released. Primarily designed for pipe and or shear ram applications. Generally used for platform applications. BOP Size and Working Pressure

Closing Volume (gal)

Opening Volume (gal)

Closing Ratio

Opening Ratio

18-3/4” 5000 psi

20.1

19.3

10.3:1

2.3:1

18-3/4” 15,000 psi

24.6

23.4

6.7:1

3.1:1

Note: 18-3/4” 5000 psi - Wedgelock Closing .32 gal. Note: 18-3/4” 5000 psi - Wedgelock Opening 5.75 gal. 46 48

50

“Lock” Port

49

47

“Unlock” Port

40

39

53 43

53 43

42 44

41

52 Vent Port 25

Typ 2 Places

26 31

45

27

30 24 32 23

28 3 29

30

2

54 19

2 Places

18 16 38 17 16

51

2 Places

7

15 13 14

60 61

12 6

11

35

35

36

33 37

60 Bleed Plug Shown out of 61 Position

4

Ram Change Piston `Open’ (Shown Out Of Position to Show Hydraulic Porting)

5

Ram Change Piston `Close’ (Not Shown)

TL BOP Wedgelock Bonnet Subassembly, (Right Hand Bonnet Shown) 18-3/4” 5000 psi WP

TC1001-06

108

SD 034616

© 2006 Cameron International Corporation

TL BOP Wedgelock Bonnet Subassembly Components 18-3/4” 5000 psi WP Item

Qty/Bonnet

Description

2

1

Bonnet

3

1

Operating Piston Subassembly

4

1

Ram Change Piston (Open)

5

1

Ram Change Piston (Close)

6

2

Ram Change Cylinder

7

2

Ram Change Access Cap

11

1

Retaining Ring, Spirolox (Connecting Rod)

12

1

Retainer Ring (Primary Connecting Rod)

13

1

Back-Up Ring (Connecting Rod)

14

1

Seal Ring (Secondary Connecting Rod Seal)

15

1

Spacer Ring (Connecting Rod)

16

2

Seal Ring

17

2

Back-Up Ring

18

1

Retainer Ring

19

1

Retaining Ring, Spirolox

23

1

Cylinder, Operating Piston

24

1

Housing, Skewed Wedgelock

25

6

Double-Ended Stud

26

6

Heavy Hex Nut

27

1

Seal Ring (Tail Rod)

28

1

Retaining Ring (Tail Rod)

29

1

Retaining Ring, Spirolox (Tail Rod)

30

2

Seal Ring

31

2

O-Ring (Operating Piston)

32

2

Wear Ring

33

2

Wear Ring (Ram Change Piston)

35

4

O-Ring (Ram Change Cylinder)

36

2

Seal Ring (Ram Change Piston Seal)

37

2

Seal Ring (Ram Change Piston Seal)

38

2

O-Ring (Ram Change Access Cap)

39

1

Wedgelock

40

1

Piston, Wedgelock

41

4

Stud, Double-Ended

42

4

Stud, Double-Ended

43

8

Nut, Heavy Hex

44

1

Head “Lock” Side, Wedgelock

45

1

Head “Unlock” Side, Wedgelock

46

1

O-Ring

47

1

O-Ring

48

1

O-Ring

49

1

Seal Ring

50

1

Seal Ring

51

2

Lifting Eye

52

1

Plug, Vent

53

2

Cap, Plug, Tapered

54

2

Pin, Dowel

60

2

Tubing Gland

61

2

Blind Plug

TC1001-06

109

© 2006 Cameron International Corporation

Manual Locking Screws – Mechanical Once the rams are in the closed position, the manual locking screws are manually turned, running the locking screw in behind the tailrod to mechanically lock the rams in the closed position. Primarily used for land and basic surface applications. BOP Size and Working Pressure

Closing Volume (gal)

Opening Volume (gal)

Closing Ratio

Opening Ratio

13-5/8” 10,000 psi

5.8

5.5

7.0:1

2.3:1

18-3/4” 5000 psi

20.1

19.3

10.3:1

2.3:1

18-3/4" 15,000 psi

24.6

23.4

6.7:1

3.1:1

46

40 `A’

41 39 `A’

25 26 Typ 8 Places

2

38

24 45 44

42 43

27

33

35

28

29

Typ 2 Places

30

7 62 40

32

41

23 19

18

16

17

3 6

15

36 40 41

62

20 14 11

35

64

Typ 2 31 Places

16

37

63 Typ 2 Places

4

Ram Change Piston `Open’

5

Ram Change Piston `Close’

13 12 Section `A-A’

TL BOP Manual Locking Screw Bonnet Assembly SD 034618

TC1001-06

110

© 2006 Cameron International Corporation

TL BOP Manual Locking Screw Components Item

Qty

Description

2

1

Bonnet

3

1

Operating Piston

4

1

Piston, Ram Change (Open)

5

1

Piston, Ram Change (Close)

6

2

Cylinder, Ram Change

7

2

Cap, Ram Change, Access

11

1

Retaining Ring, Spirolox, Connecting Rod

12

1

Retainer Ring, Primary Connecting Rod

13

1

Back-Up Ring, Connecting Rod

14

1

Seal Ring, Primary Connecting Rod Seal

15

1

Ring Spacer, Connecting Rod

16

2

Seal Ring, Secondary Connecting Rod Seal

17

2

Back-Up Ring, Connecting Rod

18

1

Retainer Ring, Connecting Rod

19

1

Retaining Ring, Spirolox, Connecting Rod

20

1

Wear Ring

23

1

Operating Piston Cylinder

24

1

Finish Cylinder Head

25

8

Double-Ended Stud

26

8

Nut, Heavy Hex

27

1

Seal Ring, Tail Rod Seal

28

1

Back-Up Ring, Tail Rod

29

1

Retaining Ring, Spirolox, Tail Rod

30

1

Seal Ring, Operating Piston Seal

31

2

O-Ring, Operating Cylinder

32

1

Wear Ring

33

2

Wear Ring, Ram Change Piston

35

4

O-Ring, Ram Change Cylinder

36

2

Seal Ring, Ram Change Piston Seal

37

2

Seal Ring, Ram Change Piston Seal

38

2

O-Ring, Ram Change Access Cap

39

2

Lifting Eye

40

2

Tubing Gland

41

2

Blind Plug

42

1

Back-Up Ring

43

1

Housing, Locking Screw

44

1

Locking Screw

45

1

O-Ring

46

6

Screw, Hex Head Cap

62

2

Pipe Plug, Hex Head

63

2

Bearing Bonnet Flange

64

1

C.O.G. Adjusting Plate Assembly Expendable Items

1

Lubricant, High Viscosity Silicone Oil 8 lb. Can

1

Paste, #503 Molybdenum Disulfide

Item numbers shown in the catalog may or may not correspond to the item numbers shown in your rig books.

TC1001-06

111

© 2006 Cameron International Corporation

TL BOP Super Shear Bonnets A TL BOP equipped with Super Shear Bonnets and non-sealing Super Shear Rams provides a solution for shearing large diameter casing, some drill collars, or heavy wall drill pipe.

BOP Size and Working Pressure

Closing Volume (gal)

Opening Volume (gal)

Closing Ratio

Opening Ratio

18-3/4” 15,000 psi

71.3

67.1

17.3:1

8.9:1

18-3/4” 15,000 psi WP Double TL BOP with Super Shear Bonnets (Upper Cavity), ST Locks and Sequencing Valves (Lower Cavity)

SD 034621

TC1001-06

112

© 2006 Cameron International Corporation

TL BOP Tandem Boosters When shearing requirements exceed the capabilities of the standard shear or large bore bonnet, Tandem Boosters can be installed to increase shearing force. Refer to EB685D & EB702D. TL BOPs with RamLocks and Tandem Boosters BOP Size and Working Pressure

Closing Volume (gal)

Opening Volume (gal)

Closing Ratio

Opening Ratio

18-3/4” 5000 psi

28.7

26.7

16.66:1

9.9:1

TL BOPs with ST-Locks and Tandem Boosters BOP Size and Working Pressure

Closing Volume (gal)

Opening Volume (gal)

Closing Ratio

Opening Ratio

18-3/4” 15,000 psi

45.4

44.1

14.3:1

6.9:1

Note: ST-Lock Lock 3.4 gal.

18-3/4” 15,000 psi WP TL BOP with ST Locks and Tandem Boosters

18-3/4” 15,000 psi WP Double TL BOP with Spacer, RamLocks and Tandem Boosters (UpperCavity)

SD 034623

TC1001-06

113

© 2006 Cameron International Corporation

T and TL BOP Pipe Rams Pipe rams are available for use in Cameron T and TL BOPs to fit all commonly used sizes of tubing, drill pipe, drill collar or casing within the ranges in the following charts. Cameron pipe rams include the following features: • Cameron pipe rams are self-feeding and incorporate a large reservoir of packer rubber to ensure a long-lasting seal under all conditions. • Ram packers lock into place and are not dislodged by well flow. • Wear pads are included on all T and TL Rams. Note: Cameron TL BOP rams can be used in the TL & T BOPs. For 18-3/4” T BOP ram assemblies with a base number of 644457 and/or ram block number of 644479, please contact your Cameron Representative. These ram blocks may need to be modified for use in the Cameron TL BOP.

TC1001-06

114

© 2006 Cameron International Corporation

T and TL BOP Pipe Ram Part Numbers Pipe Size

13-5/8” 10,000 psi*** Top Seal 644409-01-00-01 Assembly 644458

Ram 644401

Packer 644486

Blind

( )-01

( )-01

( )-01

1.315”

( )-02

( )-02

( )-02

1.660”

( )-03

( )-03

( )-03

1.900”

( )-04

( )-04

( )-04

2.062”

( )-05

( )-05

( )-05

2.375”

( )-06

( )-06

( )-06

2.875”

( )-07

( )-07

( )-07

3.500”

( )-08

( )-08

( )-08

4.000”

( )-10

( )-10

( )-10

4.500”

( )-12

( )-12

( )-12

4.750”

( )-14

( )-14

( )-14

5.000”

( )-15

( )-15

( )-15

5.500”

( )-17

( )-17

( )-17

5.562”

---

---

---

5.875”

( )-25

( )-25

( )-25

6.000”

( )-18

( )-18

( )-18

6.625”

( )-19

( )-19

( )-19

7.000”

( )-20

( )-20

( )-20

7.625”

( )-21

( )-21

( )-21

8.625”

( )-22

( )-22

( )-22

9.000”

( )-23

( )-23

( )-23

9.625”

( )-24

( )-24

( )-24

10.750”

---

---

---

11.750”

---

---

---

13.375”

---

---

---

13.500”

---

---

---

13.625”

---

---

---

14.000”

---

---

---

3.500” Aluminum

( )-09

( )-09

( )-09

4.000” Aluminum

( )-11

( )-11

( )-11

4.500” Aluminum

( )-13

( )-13

( )-13

5.000” Aluminum

( )-16

( )-16

( )-16

Base numbers remain the same unless otherwise noted. Dash numbers change by pipe size. ***Additional part numbers include: right side wear pad, 2011277-01; left side wear pad, 2011277-02 and screws, (4) 644349-01.

Note: Cameron TL BOP rams can be used in the TL & T BOPs. For 18-3/4” T BOP ram assemblies with a base number of 644457 and/or ram block number of 644479, please contact your Cameron Representative. These ram blocks may need to be modified for use in the Cameron TL BOP.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

115

© 2006 Cameron International Corporation

T and TL BOP Pipe Ram Part Numbers Pipe Size Blind 1.315” 1.660” 1.900” 2.062” 2.375” 2.875” 3.500” 4.000” 4.500” 4.750” 5.000” 5.500” 5.562” 5.875” 6.000” 6.625” 7.000” 7.625” 8.625” 9.000” 9.625” 10.750” 11.750” 13.375” 13.500” 13.625” 14.000” 3.500” Aluminum 4.000” Aluminum 4.500” Aluminum 5.000” Aluminum

18-3/4” 5000 and 10,000 psi** Top Seal 2164247-01 Assembly Ram Packer 2010094 2010068 2010078 ( )-01 2010085-01 2010077-01 ------------------------( )-02 ( )-01 ( )-01 ( )-03 ( )-02 ( )-02 ( )-04 ( )-03 ( )-03 ( )-06 ( )-05 ( )-05 ( )-08 ( )-07 ( )-07 ( )-10 ( )-09 ( )-09 ( )-11 ( )-10 ( )-10 ( )-13 ( )-12 ( )-12 ( )-14 ( )-13 ( )-13 ------( )-15 ( )-14 2010079-01 ( )-16 ( )-15 ( )-14 ( )-17 ( )-16 2010079-02 ( )-18 ( )-17 2010079-03 ( )-19 ( )-18 2010079-04 ( )-20 ( )-19 2010079-05 ( )-21 ( )-20 2010079-06 ( )-22 ( )-21 2010079-07 ( )-23 ( )-22 2010079-08 ( )-24 ( )-23 2010079-09 ----2010079-11 ------( )-25 ( )-24 2010079-10 ( )-05 ( )-04 ( )-04 ( )-07 ( )-06 ( )-06 ( )-09 ( )-08 ( )-08 ( )-12 ( )-11 ( )-11

18-3/4” 15,000 psi* Top Seal 644369-01-00-01 Assembly Ram Packer 2163090 2163089 644427 ------------------------------------( )-02-01 ( )-02-01 ( )-03-00-01 ( )-03-01 ( )-03 ( )-04-00-01 ------( )-05 ( )-05 ( )-06-00-01 ------( )-07 ( )-07 ( )-08-00-01 ( )-08 ( )-08 ( )-09-00-01 ------( )-20 ( )-12 ( )-25-00-01 ------( )-11 ( )-11 ( )-12-00-01 ( )-12-01 2163097-12 ( )-13 ------------------( )-16 2163097-16 ( )-17-00-01 ( )-17-01 2163097-17 ( )-18-00-01 ------( )-19-01 2163097-19 ( )-20-00-01 ------( )-22-01 2163097-20 --------------------------( )-23 ( )-23 ( )-24

Base numbers remain the same unless otherwise noted. Dash numbers change by pipe size. *Additional part numbers include: right side wear pad, 2011279-01; left side wear pad, 2011279-02 and screws, (4) 644349-01. **Additional part numbers include: right side wear pad, 2011281-01; left side wear pad, 2011281-02 and screws, (4) 644349-02.

Note: Cameron TL BOP Rams can be used in the TL & T BOPs. For 18-3/4" T BOP ram assemblies with a base number of 644457 and/or ram block number of 644479, please contact your Camron Representative. These ram blocks may need to be modified for use in the Cameron TL BOP.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

116

© 2006 Cameron International Corporation

T and TL BOP Shearing Blind Rams Cameron shearing blind rams shear the pipe in the hole, then bend the lower section of sheared pipe to allow the rams to close and seal. Shearing blind rams can be used as blind rams during normal drilling operations. Features of shearing blind rams include: • Large frontal area on the blade face seal reduces pressure on the rubber and increases service life. • Cameron SBRs can cut pipe numerous times without damage to the cutting edge. • The single-piece body incorporates an integral cutting edge. • CAMRAMTM top seals are standard for all T BOP shearing blind rams. • H2S SBRs are available for critical service applications and include a blade material of hardened high alloy suitable for H2S service.

T and TL BOP Shearing Blind Ram Part Numbers 13-5/8” T BOP Item

Description

Upper SBR 644591-01

18-3/4” T BOP

Lower SBR 644591-02

Upper SBR 2163096-01

Lower SBR 2163096-02

1

Body

644402-01

644402-02

2163095-01

2163095-02

2

Right Packer

644490-01

644490-01

644893-01-00-01

644893-01-00-01

3

Left Packer

644490-02

644490-02

644893-02-00-01

644893-02-00-01

4

Top Seal

644409-01-00-01

644409-01-00-01

644369-01-00-01

644369-01-00-01

5

Blade Packer

644541-01

---

644894-01-00-01

---

6

Right Wear Pad

2011277-01

2011277-01

2011279-01

2011279-01

7

Left Wear Pad

2011277-02

2011277-02

2011279-02

2011279-02

8

Screw (4)

644349-01

644349-01

644349-01

644349-01

9

Blade Insert

644581-01-00-01

644581-02-00-01

644519-03

644519-02

10

Screw (2)

644582-01

---

644524-01

---

11

Pin (2)

---

200231

---

200231

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

117

© 2006 Cameron International Corporation

TL BOP High Temp and Severe Service Packers

T & TL BOP 18-3/4” 15,000 psi WP CAMRAM 350 Packers and Top Seal Part Numbers Description

18-3/4” 15,000 psi

Top Seal

CamRam 350

645068-01-00-02

3-1/2” Packer

CamRam 350

645070-04-00-01

4-1/2” Packer

CamRam 350

645070-06-00-01

5” Packer

CamRam 350

645070-08-00-01

5-1/2” Packer

CamRam 350

645070-09

5-7/8" Packer

CamRam 350

645070-27-00-01

6-5/8” Packer

CamRam 350

645070-12-00-01

7” Packer

Severe Service

645070-13-00-01

9-5/8” Packer

Severe Service

645070-17-00-01

10-3/4” Packer

Severe Service

645070-18-00-01

13-3/8” Packer

Severe Service

645070-20-00-01

13-5/8” Packer

Severe Service

645070-25-00-01

High Temp Shearing Blind Ram for T and TL BOP Part Numbers Item

Description

18-3/4” 15,000 psi WP

2

Right Packer

644893-01-00-01

3

Left Packer

644893-02-00-01

4

Top Seal*

645068-01-00-02

5

Blade Packer

644894-01-00-01

*The part numbers listed above are used for both standard and high temperature applications except for the top seal.

TC1001-06

118

© 2006 Cameron International Corporation

T and TL BOP DVS Shear Rams Double V Shear (DVS) rams are available for the T and TL BOPs. DVS rams are similar in design to the standard shearing blind rams except that both blades are V shaped and interlocked. The DVS rams are capable of shearing and sealing on tubing, small pipe, braided cable and slickline. Contact your local Cameron Representative to determine if your application is suitable for DVS rams.

Item

Description

18-3/4” 5000 and 10,000 psi WP TL BOP Lower DVS 2010373-01-01

Upper DVS 2010373-02-01

Item

18-3/4” 15,000 psi WP T & TL BOP

Description

Upper DVS 2163180-01

Lower DVS 2163180-02

1

Body

2010366-01-01

2010366-02-01

1

Body

2

Right Packer

2010326-01

2010326-01

2

Right Packer

2163118-01

2163118-02

644893-01-00-01

644893-01-00-01

3

Left Packer

2010326-02

2010326-02

3

Left Packer

644893-02-00-01

644893-02-00-01

4

Top Seal

2164247-01

2164247-01

4

Top Seal

644369-01-00-01

644369-01-00-01

5

Right Wear Pad

2011281-01

2011281-01

5

Blade Packer

2163627-01

---

6

Left Wear Pad

2011281-02

2011281-02

6

Right Wear Pad

2011279-01

2011279-01

7

Screw

644349-02

644349-02

7

Left Wear Pad

2011279-02

2011279-02

8

Blade Packer

---

2010332-01

8

Screw, Wear Pad

644349-01

644349-01

Non-Sealing Super Shear Rams Cameron Super Shear Rams (SSR) are available for the TL BOP. SSRs shear certain drill collars and large diameter casings and some heavy wall drill pipe and tool joints. SSRs are non-sealing rams. Item

Description

1

Body

18-3/4” 15,000 psi WP T & TL BOP Upper

Lower

163387-03

163388-03

Flexpacker and Flexpacker-NR Cameron’s Flexpacker and Flexpacker-NR (Narrow Range) Rams are available for the T and TL BOPs. These rams seal on several specific diameters of tubing and pipe. BOP Size and Working Pressure

Pipe Size Range

Assembly

Body

Packer

18-3/4” 5000/10,000 psi WP

2.875” to 5.000”

2010423-01

2010068-10

2010093-01

18-3/4” 5000/10,000 psi WP

5.000” to 7.000”

2010423-02

2010068-16

2010356-01

18-3/4” 5000/10,000 psi WP

3.500” to 5.500”

2010423-03-01

2010068-12-01

2011989-01

18-3/4” 15,000 psi WP

5.000” to 5.500”

2011691-01

2163089-08

2011641-01

18-3/4” 15,000 psi WP

5.000” to 6.625” NR

2163768-01

2163767-01

2011870-01

Top Seal

Right Wear Pad

Left Wear Pad

Screw Wear Pad

BOP Size and Working Pressure 18-3/4” 5000/10,000 psi WP

2164247-01

2011281-01

2011281-02

644349-02

18-3/4” 5000/10,000 psi WP

2164247-01

2011281-01

2011281-02

644349-02

18-3/4” 5000/10,000 psi WP

2164247-01

2011281-01

2011281-02

644349-02

18-3/4” 15,000 psi WP

644369-01-00-01

2011279-01

2011279-02

644349-01

18-3/4” 15,000 psi WP

2163491-01

2011279-01

2011279-02

644349-01

Note: Cameron TL BOP rams can be used in the TL & T BOPs. For 18-3/4” T BOP ram assemblies with a base number of 644457 and/or ram block number of 644479, please contact your Cameron Representative. These ram blocks may need to be modified for use in the Cameron TL BOP. Note: The second set of dash numbers in the assembly and ram block part numbers covers specifications such as ABS, DNV, etc. Verify with your local Cameron Representative.

TC1001-06

119

© 2006 Cameron International Corporation

T and TL BOP Variable Bore Rams One set of variable bore rams seals on several sizes of pipe or hexagonal kelly. Variable bore rams are available in the size ranges listed in the chart below. All rams listed are suitable for H2S service per NACE MR-01-75. CAMRAM packers and top seals are standard for all T and TL BOP variable bore rams. The variable bore ram packer contains steel reinforcing inserts similar to those in the Cameron annular BOP packer. The steel inserts rotate inward when the rams are closed so that the steel provides support for the rubber which seals against the pipe.

T and TL BOP Variable Bore Ram Part Numbers BOP Size and Working Pressure

Pipe Size Range

Assembly

Body

Packer

13-5/8” 10,000 psi WP

2.875” to 5.000”

644618-01

644567-01

644549-01

13-5/8” 10,000 psi WP

3.500” to 5.500”

644618-02

2164022-01

644549-01

18-3/4” 5000/10,000 psi WP

3.500” to 7.625”

2163272-01

2163228-01

2163493-01

18-3/4” 15,000 psi WP

3.500” to 5.000”

2163094-01

2163093-01

644531-01-01-01

18-3/4” 15,000 psi WP

3.500” to 5.500”

2163169-01

2163170-01

644531-01-01-01

18-3/4” 15,000 psi WP

3.500” to 7.625”

2163092-01

2163091-01

644404-01-00-01

18-3/4” 15,000 psi WP

3.500” to 6.625”

2163092-02

2163091-02

644404-01-00-01

18-3/4” 15,000 psi WP

3.500” to 5.625”

2163092-03

2163091-04

644404-01-00-01

Top Seal

Right Wear Pad

Left Wear Pad

Screw Wear Pad

13-5/8” 10,000 psi WP

644409-01-00-01

2011277-01

2011277-02

644349-01

13-5/8” 10,000 psi WP

644409-01-00-01

2011277-01

2011277-02

644349-01

2164247-01

2011281-01

2011281-02

644349-02

18-3/4” 15,000 psi WP

644369-01-00-01

2011279-01

2011279-02

644349-01

18-3/4” 15,000 psi WP

644369-01-00-01

2011279-01

2011279-02

644349-01

18-3/4” 15,000 psi WP

644369-01-00-01

2011279-01

2011279-02

644349-01

18-3/4” 15,000 psi WP

644369-01-00-01

2011279-01

2011279-02

644349-01

18-3/4” 15,000 psi WP

644369-01-00-01

2011279-01

2011279-02

644349-01

BOP Size and Working Pressure

18-3/4” 5000/10,000 psi WP

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

120

© 2006 Cameron International Corporation

Type T and TL BOP Ram Wear Pads Bore Size and Left Working Pressure (psi) Part Number

Qty. Per Assy.

Right Part Number

Qty. Per Assy.

Screw Part Number

Qty. Per Assy.

13-5/8" 10,000

2011277-01

1

2011277-02

1

644349-01

4

18-3/4" 5000 - 10,000

2011281-01

1

2011281-02

1

644349-02

2

18-3/4" 15,000

2011279-01

1

2011279-02

1

644349-01

4

*Note: Ram Block may require modification in order to utilize the wear pads. Consult your Cameron Representative.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

121

© 2006 Cameron International Corporation

TC1001-06

122

© 2006 Cameron International Corporation

C BOP The Cameron C BOP was designed as an emergency safety head for snubbing coiled tubing workover applications. The main function of the C BOP is to shear whatever is in the hole - from braided cable to perforating guns - and forms a safe, pressure-tight seal. Features of the C BOP include:

• C BOPs are compact • Visual position indicators clearly show the lock and unlock status, as well as the ram position • DSI Shear Rams shear and seal wireline, braided cable, perforating guns, gravel pack screen • • • • • • • • • •

TC1001-06

assemblies, etc. Bonnet contains an auxiliary connecting rod seal for back up in emergency situations. BOP can be installed in different orientations through the use of duplicate plumbing ports Ram changeout is simple because of the elongated top bonnet stud Provides maximum shearing capacity to ensure reliable shearing and sealing with a maximum closing pressure of 2800 psi achieved with a 15” diameter operating piston coupled with DSI Shearing Rams Rams are mounted on removable buttons that may be easily changed out if required Close and Lock functions are independent, allowing shearing without automatically locking optional sequence valve is available Rams are automatically unlocked prior to opening through the use of a sequence valve High temperature seals are standard Optional pressure balance chambers are available for subsea use 13” flanges are available to accommodate increased bending moments

123

© 2006 Cameron International Corporation

C BOP Operating Data and Fluid Requirements Bore Size and Working Pressure

Gals to Open Rams (1 set)

Gals to Close Rams (1 set)

Two Wedgelocks Lock (Gal)

Closing Ratio

Opening Ratio

7-1/16” 10,000 psi

9.6

9.6

2

32.3:1

32.3:1

TC1001-06

124

© 2006 Cameron International Corporation

81.37” Bonnets Closed 100.37” Bonnets Open

44.41”

5.50”

15.75”

Model C BOP Assembly SD 017962

C BOP Dimensions BOP Size and Working Pressure 7-1/16” 10,000 psi

TC1001-06

Length Length (Bonnets Closed) (Bonnets Open) 81.37”

100.37”

125

Width

Height

Weight

44.41”

30.19”

6154 lb

© 2006 Cameron International Corporation

8 7

2 111 1

112 10 9 72

73 76

78 75

74 11

81 80 83 4 84 89

77 79

84

129 71 82

90 91

92 6 85 93

88 86

126

87

5

127

3

124 123 119 121

125

97

109

95

114 105

96

108

104

122 130

120

107 115 113 110 116 94

117

106 103

102 112 98

99 118 101

C BOP Exploded View SD 034607 TC1001-06

126

© 2006 Cameron International Corporation

7-1/16” 10,000 psi WP C BOP Part Numbers Item

Description

Qty

7-1/16” 10,000 psi

7-1/16” 10,000 psi w/Sequence Valve

1

Body

1

---

---

2

Double Ended Stud

12

219069-14-07-43

---

3

Stud Sleeve

4

2163754-01

2163754-01

4

Bonnet Bolt

4

2163757-01

2163757-01

5

Bonnet Stud

4

2163760-01

2163760-01

6

Cap Nut

4

2163755-01

2163755-01

7

Bonnet Subassembly

2

2163771-01

2164549-01

8

Heavy Hex Nut

12

2709000-14-11

---

9

DSI Ram Subassembly, Upper

1

2163879-03

2163879-03

10

DSI Ram Subassembly, Lower

1

2163879-04

2163879-04

11

Piping Schematic

1

2163792-01

2163792-02

71

Bonnet

2

2163697-01

2163697-01

72

Bonnet Seal, Compression Type

4

644573-01-00-01

644573-01-00-01

73

Plastic Packing Retainer Ring

2

2010178-01

2010178-01

74

Energizing Ring

2

018586-12

018586-12

75

Lip Seal

2

645077-37-00-01

645077-37-00-01

76

O-Ring

2

018492-92

018492-92

77

Lip Seal Retainer

2

689523-04

689523-04

78

Spirolox Retaining Ring

2

018572-83

018572-83

79

Ring Gasket

4

021792-21

021792-21

80

Check Valve

2

M517988

M517988

81

Plastic Packing

10

007650-08

007650-08

82

Socket Head Cap Screw

2

005940-09

005940-09

83

Hex Head Pipe Plug

2

005930-05

005930-05

84

O-Ring

4

2724482-01

2724482-01

85

Wear Ring

2

049223-37

049223-37

86

Polypak Lip Seal

2

2724483-01

2724483-01

87

Pip Ring

2

2724480-01

2724480-01

88

Operating Piston

2

2164237-01

2164237-02

89

Operating Piston Cylinder

2

2163681-01

2163681-01

90

Piston Alignment Rod

2

2163770-01

2163770-01

91

O-Ring

4

702645-21-01

702645-21-01

92

Backup Ring

4

200130

200130

93

Wear Ring

2

644443-08

644443-08

94

Pipe Plug, Threaded Hex Socket

2

002504-14

---

Pressure Balance Chamber Subassembly*

2

---

2164557-01

95

Cylinder Stud

8

2163849-01

2163849-01

96

Heavy Hex Nut

8

508761-17-02

508761-17-02

97

Cylinder Head

2

2163758-01

2163758-02

98

Locking Cylinder

2

2010267-01

2010267-01

99 100

Wedgelock Piston Wedgelock Cap

2 2

2010270-04 2010269-01

2010270-01 2010269-01

94A

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

127

© 2006 Cameron International Corporation

7-1/16” 10,000 psi WP C BOP Part Numbers Item

Description

Qty

7-1/16” 10,000 psi

7-1/16” 10,000 psi w/Sequence Valve

702645-43-51

702645-43-51

101

O-Ring

2

102

Seal Ring

2

2730549

2730549

103

Wedgelock Nut

2

2010271-01

2010271-01

104

Socket Head Cap Screw

2

038199-08-05-10

038199-08-05-10

105

Wedgelock Sequence Cap Body

2

2010268-01

2010268-01

106

Seal Ring

2

2730548

2730548

107

Sequence Cap Head

2

2010277-01

2010277-01

108

Nut, Sequence Cap for Wedgelock

2

2010272-01

2010272-01

109

Poppet Valve for Sequence Cap

2

2010276-01

2010276-01

110

Sequence Cap Seat

2

645023-01

645023-01

111

Blind Plug

2

017454-09

017454-09

112

Tubing Gland

2

017454-08

017454-08

113

O-Ring

2

702645-22-91

702645-22-91

114

O-Ring

2

702645-14-11

702645-14-11

115

O-Ring

6

702645-11-02

702645-11-02

116

O-Ring

2

702645-34-21

702645-34-21

117

O-Ring

2

702645-43-01

702645-43-01

118

O-Ring

2

702645-43-11

702645-43-11

119

12 Pt Cap Screw

8

702585-10-00-16

702585-10-00-16

120

Dowel Pin

2

021810-39

021810-39

121

Frame for Wedgelock Indicator

2

2010295-01

2010295-01

122

Position Indicator for Wedgelock

4

2010296-01

2010296-01

123

Dowel Pin

2

021810-01-36

021810-01-36

124

Return Spring, Position Indicator Wedgelock

2

2724154-01

2724154-01

125

Spring

2

711115

711115

126

Polypak Seal

2

2724485-01

2724485-01

127

Polypak Pip Ring

2

2724486-01

2724486-01

128

Sequence Valve Subassembly*

2

---

644827-04

129

Ram Guide Pin

4

030313-02

030313-02

130

12 Pt Cap Screw

4

702585-10-00-10

702585-10-00-10

1

2163876-01

2163876-02

Accessory Items Spare Parts Kit Sequence Valve Seal Repair Kit

1

---

2163137-01

Eyebolts

2

190999-06

190999-07

1

713114-08

713114-08

Ring Gasket, BX-156

2

702003-15-62

---

Ram Lube, Chemola

1 gal

713878

713878

1 1 2

025950

025950

144010-02 236606-01

144010-02 236606-01

Hammer Wrench Expendable Items

Miscellaneous Items Nameplate, Patent Nameplate, Ram type BOP Nameplate, Top

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

128

© 2006 Cameron International Corporation

13 24

7

Sequencing Valve Subassembly Components

4

6

Item

Qty

Description

1

1

Poppet, Metal-to-Metal Seal

2

1

Compression Spring

3

1

Valve Seat

4

1

Actuator

5

1

O-Ring

6

1

O-Ring

7

1

Liner

8

2

O-Ring

9

1

Compression Spring

10

1

Cap

11

4

Hex Head Cap Screw

12

1

Body

13

1

O-Ring

8

14

1

Balance Piston

9

15

1

Poppet Stop

15

16

1

O-Ring

17

1

O-Ring

24

1

O-Ring

*

1

Sealant/Lubricant

2

1

3

5 8

12

14 16 17

10

11

*Not Shown

Sequencing Valve SD 034597

TC1001-06

129

© 2006 Cameron International Corporation

C BOP Dual String Interlocking (DSI) Rams DSI rams were developed to shear multiple tubing strings regardless of their orientation to the centerline of the ram bore. They are spring-loaded and interlocked to prevent vertical separation between the upper and lower blades. This feature also provides the capability to maintain a seal and shear wireline and braided cable with zero tension in the line. The efficient shear blade geometry on both upper and lower rams reduces the required shearing force. The tool steel inlayed cutting edges include a secondary cutting edge, which cuts and wipes away cable strands or shrapnel, which may have survived the initial shear edges. Clearance below the shear blade is maximized to allow the fish to collect when shearing large assemblies. DSI Ram Subassembly, Upper

Item

Part Number

Qty

Description

1

2163046-04

1

Ram Body, Upper

2

2163056-01

1

Side Packer, Left

3

2163056-02

1

Side Packer, Right

4

2163049-01

2

Blade Packer

5

2164573-01

1

Top Seal

*6

2163882-01

2

Pin

* Not Shown DSI Ram Subassembly, Lower

Item

Part Number

Qty

Description

7

2163046-03

1

Ram Body, Lower

8

2163057-01

1

Side Packer, Left

9

2163057-02

1

Side Packer, Right

10

2164573-01

1

Top Seal

1 5 2 10

7

8

3

4

9 SD 034604

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

130

© 2006 Cameron International Corporation

C BOP Shearing Capability

Material Sheared

Outside Diameter

Specifications

Quantity

Slickline

0.108”

Without Tension

1

Slickline

0.108”

Without Tension

10

4230 Steel

1

S-135, 13.3 ppf

1

Sinker Bar Drill Pipe Hepta Cable

2” 3.5”

500 lb Minimum Tension

1

Fiberspar Coiled Tubing

15/32” 3”

500 lb Minimum Tension on One String

2

Fiberspar Coiled Tubing

3”

2000 lb Compression on One String

2

0.109” Wall Thickness

10

Tubing

1.25”

Tubing

2”

0.188” wall thickness with a strand of 15/32” OD cable in each string and at least 500 lb of tension on one of the tubing strings

3

Tubing

2”

0.188” wall thickness with a strand of 15/32” OD cable in each string and at least 9500 lb of compression imparted on one of the strings

3

Tubing

2-7/8”

0.188” wall thickness with a strand of 15/32” OD cable in each string and at least 19,500 lb of compression on one of the strings

2

Tubing

2-7/8”

0.188” wall thickness with a strand of 15/32” OD cable in each string and at least 500 lb of tension on one of the strings

2

Tubing

4.5”

15 ppf

1

Perforating Gun

4.5”

---

1

4-5/8” gravel pack with 2-3/8” wash pipe inside

1

Screen Assembly Cable

7-16”

Without Tension

10

Tubing

4”

13 Chrome L-80

1

E-75 17.5 ppf

1

Drill Pipe

3-1/2”

Note: All shearing tests have been documented and are available in EB 862D.

TC1001-06

131

© 2006 Cameron International Corporation

S/QRC and G-2 Snubbing BOPs The Cameron S/QRC and G-2 snubbing blowout preventers are used in well workover and servicing operations. S/QRCs are ram-type preventers which maintain pressure control for all types of workover wells. The Cameron G-2 BOP is suitable for wells requiring a 4-1/16” 5000 or 10,000 psi WP or 7-1/16” 5000 psi WP snubbing preventer.

S/QRC and G-2 Rams Cameron S/QRC and G-2 snubbing BOPs can be equipped with the proper rams to perform a full range of snubbing preventer operations. Four types of ram bodies are available for the 4-1/16” 10,000, 15,000 and 25,000 psi S/QRC and 4-1/16” 5000 and 10,000 psi G-2 BOPs. These include blind, pipe, shear and wireline rams. Pipe rams can be fitted with safety packers, wear insert packers or slip inserts. Blind and pipe rams are available for all sizes.

Features include:

• Safety packers seal around tubing in the well bore. Tubing can be stripped or snubbed through these packers, if necessary. • Wear insert packers are for stripping and snubbing service. These subassemblies have a wear insert which can be easily replaced to renew the packer. • Slip inserts are used to hold the tubing string after shearing or during workover operations by supporting upward and downward forces as well as tortional forces. • Wireline ram guides have hardened steel guiding surfaces and are replaceable. • No special operating system is required for shearing. • All S/QRC and G-2 rams are suited for H2S service per NACE MR-01-75.

TC1001-06

132

© 2006 Cameron International Corporation

TC1001-06

133

© 2006 Cameron International Corporation

S/QRC and G-2 BOP Rams

Pipe Ram Part Numbers (4-1/16” 10,000 and 15,000 psi S/QRC and 4-1/16” 5000 and 10,000 psi G-2)

Tubing Size

Safety Packer* Ram Assembly**

Safety Packer**

Pipe Ram Body**

Top Seal**

Blind

046955-01

046941-01

046938

046950

1.000”

---

---

---

---

1.050”

046955-02

046941-04

046940-03

046950

1.315”

046955-03

046941-03

046940-02

046950

1.660”

046955-04

046941-02

046940-01

046950

1.900”

046955-05

046942-01

046940-04

046950

2.000”

046955-06

046942-02

046940-05

046950

2.062”

046955-07

046942-03

046940-06

046950

2.375”

046955-08

046942-04

046939-01

046950

2.875”

046955-09

046942-05

046939-02

046950

Tubing Size

Wear Insert Packer Subassy**

Wear Insert Packer**

Wear Insert Subassembly**

Slip Insert Subassembly**

Blind

---

---

---

---

1.000”

---

---

---

614442-09

1.050”

614267-01

614262-01

614259-01

614442-01

1.315”

614267-02

614262-02

614259-02

614442-02

1.660”

614267-03

614262-03

614259-03

614442-03

1.900”

614267-04

614262-04

614259-04

614442-04

2.000”

614267-05

614262-05

614259-05

614442-05

2.062”

614267-06

614262-06

614259-06

614442-06

2.375”

614267-07

614262-07

614259-07

614442-07

2.875”

---

---

---

---

*Includes pipe ram body **2 of each required

TC1001-06

134

© 2006 Cameron International Corporation

S/QRC and G-2 BOP Shear Rams

Shear Ram Part Numbers (Sealing-Type Shear Ram Available for 4-1/16” and 7-1/16” 5000 psi Not Shown)

BOP Description

Shear Ram Assembly*

Upper Ram Body

Lower Ram Body

Qty

Part Number

Qty

Part Number

Qty

Part Number

4-1/16” 5000 and 10,000 psi G-2

1

614411-01

1

614402-02

1

614402-01

4-1/16” 10,000 and 15,000 psi S/QRC

1

614411-01

1

614402-02

1

614402-01

BOP Description

Shear Blade

Blade Retainer

Bolts

Qty

Part Number

Qty

Part Number

Qty

Part Number

4-1/16” 5000 and 10,000 psi G-2

2

614413-01

2

614414-01

4

702585-14-00-24

4-1/16” 10,000 and 15,000 psi S/QRC

2

614413-01

2

614414-01

4

702585-14-00-24

*Shear ram assembly includes upper and lower shear rams.

TC1001-06

135

© 2006 Cameron International Corporation

S/QRC and G-2 BOP Wireline Rams

Wireline Ram Part Numbers (4-1/16” 5000 and 10,000 psi G-2 and 4-1/16” 10,000 and 15,000 psi S/QRC)

Wireline Size (in)

Wireline Ram Assembly* (1 required)

Upper Ram Body (1 required)

Lower Ram Body (1 required)

Top Seal (2 required)

Wireline Packer (2 required)

Wireline Guide (2 required)

0 - 0.250

614263-06

614236-01

614235-01

046950

046941-10

614264-01

0.312

614263-01

614236-01

614235-01

046950

046941-05

614264-01

0.438

614263-02

614236-02

614235-02

046950

046941-06

614264-02

0.562

614263-03

614236-03

614235-03

046950

046941-07

614264-03

0.750

614263-04

614236-04

614235-04

046950

046941-08

614264-04

0.875

614263-05

614236-05

614235-05

046950

046941-09

614264-05

*Wireline ram assembly includes upper and lower wireline rams. **Screw part number: 702507-06-00-06.

TC1001-06

136

© 2006 Cameron International Corporation

CTB Coiled Tubing BOP Cameron now offers the Foley type CTB BOP for coiled tubing applications. All CTB BOP’s are manufactured in accordance with API 16A and NACE MR-01-75. Third party certifications are available. Features of the CTB include: • • • • • • • • • • • •

One-piece forged body Low profile design Light weight Easy ram change-out Tapered ram bore for easy ram removal Visual indicators for ram position All bonnet assemblies sized to shear tubing with well bore pressure Internal hydraulics (no external hose assemblies) Fluid check valves provided to minimize fluid loss during bonnet opening Secondary ram shaft packing for emergency pack-off Internal pressure equalizing valves Available in 3-1/16” 10,000 sizes as single, double, triple or quad body configurations • Top & bottom connections and side outlets per customer requirements For more information, please contact your local Cameron representative.

TC1001-06

137

© 2006 Cameron International Corporation

Cameron QBH/QBM Snubbing/Coiled Tubing BOPs Cameron QBH/QBM BOP’s were designed to provide reliable and easy to use BOP’s for your snubbing/coiled tubing applications. The QBH and QBM BOPs are manufactured per API 16A and NACE MR-01-75. Features include: • Compact unitized body available in single, double, triple or quad configurations • Hydraulic or Manual opening bonnets (QBH – hydraulic; QBM – manual) • Bonnets utilize bore type bonnet seals, eliminating the need for high bonnet bolt torque • Interchangeable bonnets and rams on models: 2-9/16”, 3-1/16” and 4-1/16” BOPs for reduction of inventory • Shear rams cut most common sizes of pipe and tubing without a booster • Boosters are available on the 4-1/16” BOP capable of shearing 2-3/8” P110 heavy weight 5.95 lb/ft., 204” wall tubing. • Flanged or studded end connections • Hydraulic bonnets provide quick ram change-out • Available in 5000, 10,000 and 15,000 psi working pressures For more information, please contact your local Cameron representative.

TC1001-06

138

© 2006 Cameron International Corporation

D and DL Annular Blowout Preventers In the unique design of the Cameron DL Annular BOP, closing pressure forces the operating piston and pusher plate upward to displace the solid elastomer donut and force the packer to close inward. As the packer closes, interlocking steel reinforcing inserts rotate inward to form a continuous support ring of steel at the top and bottom of the packer. The inserts remain in contact with each other whether the packer is open, closed on pipe, or closed on open hole. Other features of the DL BOP include:

• The Cameron DL BOP is shorter in height than comparable annular preventers. • Available in dual configuration in certain sizes. • A quick-release top with a one-piece split lock ring permits quick packer change-out with no • • • • •

•

loose parts involved. The design also provides visual indication of whether the top is locked or unlocked. The DL BOP is designed to simplify field maintenance. Components subject to wear are field-replaceable and the entire operating system may be removed in the field for immediate change-out without removing the BOP from the stack. Twin seals separated by a vented chamber positively isolate the BOP operating system from well bore pressure. High strength polymer bearing rings prevent metal-to-metal contact and reduce wear between all moving parts of the operating systems. All Cameron DL BOPs are manufactured to comply with NACE specification MR-01-75 for H2S service. A shallow gas bleed port is available in some sizes. Packers for DL BOPs have the capacity to strip pipe as well as close and seal on almost any size or shape object that will fit into the well bore. These packers will also close and seal on open TM hole. Popular sizes of the DL BOP are available with high-performance CAMULAR annular packing subassemblies. Special stripper packers are available in some sizes to accommodate 6-5/8" pipe/mandrels.

The Cameron DL BOP is available in sizes from 7-1/16” to 21-1/4” and in working pressures from 2000 to 20,000 psi.

TC1001-06

139

© 2006 Cameron International Corporation

TC1001-06

140

© 2006 Cameron International Corporation

D and DL Annular BOP Components Annular Blowout Preventer Components Item Number

Description

Item Number

Description

1

Body

43

Stud*

2

Top

44

Nut*

3

Piston

45

Bushing Retaining Screw

4

Inner Cylinder Head

46

Oil Injection Fitting

5

Outer Cylinder Head

47

Lifting Eye*

6

Pusher Plate

50

Support Plate Bearing Ring

7

Donut and Packer**

51

Piston ID Bearing Ring

9

Lock Ring

52

Inner Cylinder OD Bearing Ring

10

Actuator Ring

53

Outer Cylinder ID Bearing Ring

11

Actuator Screw

54

Piston OD Bearing Ring

12

Actuator Screw Bushing

55

Pusher Plate Bearing Ring

13

Outer Cylinder Lock Segment

56

Outer Cylinder ID Wiper Ring

14

Lock Segment Retaining Ring

57

Inner Cylinder OD Wiper Ring

15

Support Plate

58

Inner Cylinder ID Lip Seal

16

Top Trash Seal

59

Inner Cylinder ID Lip Seal

17

Actuator Screw Bearing

60

Inner Cylinder OD Lip Seal

29

Anchor Shackle

61

Piston ID Lip Seal

30

Inner Cylinder Stud

62

Piston OD Lip Seal

31

Inner Cylinder Nut

63

Outer Cylinder ID Lip Seal

32

Stud*

64

Outer Cylinder OD Lip Seal

33

Nut*

65

Outer Cylinder OD Lip Seal

34

Lock Ring Access Port Plug

66

Top ID Lip Seal

35

Hydraulic Port Plug

67

Top OD Lip Seal

36

Pusher Plate Screw

68

Outer Cylinder ID Lip Seal

37

Actuator Ring Stop Screw

69

Inner Cylinder OD Lip Seal

38

Lifting Eye*

75

Inner Cylinder ID Backup Ring*

39

Lifting Eye*

76

Inner Cylinder OD Backup Ring*

40

Lifting Eye*

77

Outer Cylinder ID Backup Ring*

41

Lifting Eye*

78

Top ID Backup Ring*

42

Lifting Eye*

*Not shown on the illustration. TM **These items are sold as a subassembly (packer & donut). CAMULAR high-performance donuts and packers are available for most

sizes and working pressures of the annular BOP. A complete replacement kit for seals, bearings and scrapers is available. See pages 153-154 .

TC1001-06

141

© 2006 Cameron International Corporation

D and DL Annular BOP Dimensions and Weights Comparative Size and Weight Data (All Models Flanged) Size and Working Pressure

Height (inches)

Diameter (inches)

Weight (pounds)

Gallons to Close

Gallons to Open

7-1/16” 3000 psi

23-15/16

27-7/8

2738

1.69

1.39

7-1/16” 5000 psi

25-1/2

27-7/8

2778

1.69

1.39

7-1/16” 10,000 psi

34-7/32

37-3/8

7255

2.94

2.55

7-1/16” 15,000 psi

44-3/4

43-1/4

12,000

6.94

6.12

7-1/16” 20,000 psi

50-3/4

48

17,716

8.38

7.56

11” 3000 psi

32-1/2

41-1/4

8255

5.65

4.69

11” 5000 psi

34-15/16

41-1/4

8447

5.65

4.69

11” 10,000 psi

41-1/16

48-1/2

13,954

10.15

9.05

11" 15,000 psi

62-1/2

61

36,500

23.5

21.3

13-5/8” 3000 psi

36-11/16

52-3/8

12,855

12.12

10.34

13-5/8” 5000 psi

40-3/16

52-3/8

16,215

12.12

10.34

13-5/8” 10,000 psi

49-3/32

61

27,262

18.10

16.15

16-3/4” 3000 psi

47

60-1/2

25,950

22.30

19.00

16-3/4” 5000 psi

49

60-1/2

26,300

22.30

19.00

18-3/4” 5000 psi

60-13/16

62

29,560

35.60

29.00

18-3/4” 10,000 psi

70-1/2

67

40,940

51.00

45.10

20-3/4” 3000 psi

54-3/4

66

29,500

40.50

28.40

21-1/4” 2000 psi

53-5/16

66

29,000

40.50

28.40

21-1/4" 5000 psi

64-27/32

71-11/16

36,000

40.50

28.40

TC1001-06

142

© 2006 Cameron International Corporation

7-1/16” 3000 - 20,000 psi WP D and DL Annular BOP Part Numbers

Item

7-1/16” 3000and 5000 psi

Description

Qty

7-1/16” 10,000 psi

Part Number

Qty

7-1/16” 15,000 psi

7-1/16” 20,000 psi

Part Number

Qty

Part Number

Qty

Part Number

3

Piston

1

699333-01

1

699333-02

1

699333-10

1

699333-11

4

Inner Cylinder Head

1

699334-01-02

1

699334-02-02

1

699334-10

1

699334-11-01

5

Outer Cylinder Head

1

699335-01

1

699335-02

1

699335-10

1

699335-11

6

Pusher Plate

1

699336-01

1

699336-02

1

699336-10

1

699336-11

7

Donut and Packer**

1

644856-02-00-01+

1

644856-03-00-02+

1

644856-11+

1

644856-11+

9

Lock Ring

1

699337-01

1

699337-02

1

699337-10

1

699337-11

10

Actuator Ring

1

699338-01

1

699338-02

1

699338-10

1

699338-11

11

Actuator Screw

4

049089-03

4

049089-01

4

049089-01

4

049089-01

12

Actuator Screw Bushing

4

699343-03

4

699343-01

4

699343-01

4

699343-01

13

Outer Cylinder Lock Segment

--

---

--

---

--

---

3

614350-02

14

Lock Segment Retaining Ring

--

---

--

---

--

---

1

049416-02

15

Support Plate

1

2010341-01

1

2010341-02

1

2010341-15

1

2010341-11

16

Top Trash Seal

1

046045-19

1

046045-20

1

046045-14

1

046045-10

17

Actuator Screw Bearing

8

644868-03

8

644868-01

8

644868-01

8

644868-01

29

Anchor Shackle

4

701002

4

701003

4

663311-13

4

663311-13

30

Inner Cylinder Stud

8

046037-24

12

046037-16

12

046037-30

12

392002-09-00-70

31

Inner Cylinder Nut

8

049800-01

12

049800-01

12

049800-08

12

049800-03

32

Stud

--

---

--

---

--

---

--

---

33

Nut

--

---

--

---

--

---

--

---

34

Lock Ring Access Port Plug

--

--

--

--

2

005930-07-10

2

005930-07-10

35

Hydraulic Port Plug

2

005930-03-10

2

005930-05-10

2

005930-05-10

2

005930-05-10

36

Pusher Plate Screw

24

046052-04

24

046052-05

24

046052-08

24

046052-08

37

Actuator Ring Stop Screw

4

046052-03

4

046052-01

4

049477-01

4

046052-01

38

Lifting Eye*

4

700734

4

700734

4

012185-03

4

012185-03

39

Lifting Eye*

4

012185-03

4

012185-03

4

012185-02

4

012185-02

40

Lifting Eye*

4

012185-02

4

012185-02

4

700735

4

700735

41

Lifting Eye*

4

700735

4

700735

4

700734

2

700734

42

Lifting Eye*

--

---

--

---

--

---

--

---

*Not shown on the drawing **These items are sold as a subassembly (packer & donut) +CAMULARä

Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

143

© 2006 Cameron International Corporation

7-1/16” 3000 - 20,000 psi WP D and DL Annular BOP Part Numbers

Item

Description

7-1/16” 3000and 5000 psi

7-1/16” 10,000 psi

7-1/16” 15,000 psi

7-1/16” 20,000 psi

Qty

Part Number

Qty

Part Number

Qty

Part Number

Qty

Part Number

43

Stud

--

---

--

---

--

---

--

---

44

Nut

--

--

--

---

--

---

--

---

45

Bushing Retaining Screw

4

005940-01-18

4

702514-25-20-08

4

702514-25-20-08

4

702514-25-20-08

46

Oil Injection Fitting

4

700710

4

700710

4

700710

4

700710

47

Lifting Eye*

--

---

4

012185-01

--

---

--

---

50

Support Plate Bearing Ring

1

049122-01

1

049122-02

1

049122-07

1

049122-07

51

Piston ID Bearing Ring

1

2010196-13

1

2010196-15

1

2010196-36

1

2010196-32

52

Inner Cyl. OD Bearing Ring

1

2010196-01

1

2010196-03

1

2010196-33

1

2010196-33

53

Outer Cyl. ID Bearing Ring

1

2010196-02

1

2010196-04

1

2010196-34

1

2010196-34

54

Piston OD Bearing Ring

1

2010196-14

1

2010196-16

1

2010196-35

1

2010196-31

55

Pusher Plate Bearing Ring

1

699345-04

1

699345-05

1

699345-08

1

699345-08

56

Outer Cyl. ID Wiper Ring

1

700713

1

700810

1

705151

1

705151

57

Inner Cyl. OD Wiper Ring

1

700715

1

700809

1

705152

1

705152

58

Inner Cylinder ID Lip Seal

1

615851-31-01

1

615850-24-01

1

615850-37-01

1

615850-37-01

59

Inner Cylinder ID Lip Seal

1

615851-32-01

1

615851-26-01

1

615851-35-01

1

615851-37-01

60

Inner Cylinder OD Lip Seal

2

615847-30-01

2

615847-26-01

1

615847-34-01

1

615847-34-01

61

Piston ID Lip Seal

1

615851-33-01

1

615851-27-01

1

615851-36-01

1

615851-36-01

62

Piston OD Lip Seal

1

615847-31-01

1

615847-27-01

1

615847-35-01

1

615847-37-01

63

Outer Cylinder ID Lip Seal

2

615851-30-01

2

615851-25-01

1

615851-34-01

1

615851-34-01

64

Outer Cylinder OD Lip Seal

1

615847-29-01

1

615847-25-01

1

615847-32-01

1

615847-36-01

65

Outer Cylinder OD Lip Seal

1

615847-28-01

1

615847-24-01

1

615847-33-01

--

--

66

Top ID Lip Seal

1

615851-29-01

1

615850-23-01

1

615850-35-01

1

615850-35-01

67

Top OD Lip Seal

1

706258-11

1

706258-04

1

706258-01

1

706258-05

68

Outer Cylinder ID Lip Seal

--

---

--

---

1

615850-36-01

1

615850-36-01

69

Inner Cylinder OD Lip Seal

--

---

--

---

1

615846-26-01

1

615846-26-01

75

Inner Cyl. ID Backup Ring*

--

---

--

---

1

615399-09

1

615378-02

76

Inner Cyl. OD Backup Ring*

--

---

--

---

1

615399-10

1

615622-02

77

Outer Cyl. ID Backup Ring*

--

---

--

---

1

615399-08

1

615378-03

78

Top ID Backup Ring*

--

---

--

---

1

615399-07

1

615378-04

***

Complete Replacement Kit

1

049742-01

1

049742-02

1

049742-13

1

049742-03

*Not shown on the drawing +CAMULARä

Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

144

© 2006 Cameron International Corporation

11” 3000 - 15,000 psi WP D and DL Annular BOP Part Numbers

Item

11” 3000 and 5000 psi

Description

11” 10,000 psi

11” 15,000 psi

Qty

Part Number

Qty

Part Number

Qty

Part Number

3

Piston

1

699333-03

1

699333-04

1

699333-38-00-01

4

Inner Cylinder Head

1

699334-27

1

699334-28

1

699334-38-00-01

5

Outer Cylinder Head

1

699335-27

1

699335-28

1

699335-38-00-01

6

Pusher Plate

1

699336-03

1

699336-04

1

699336-38-00-01

7

Donut and Packer**

1

644856-04-00-02+

1

2231480-28-00-01

1

644800-38-00-01

9

Lock Ring

1

699337-27

1

699337-28

1

699337-38-00-01

10

Actuator Ring

1

699338-27

1

699338-28

1

699338-38-00-01

11

Actuator Screw

4

049089-01

4

049089-01

4

049089-02

12

Actuator Screw Bushing

4

699343-01

4

699343-01

4

699343-02

13

Outer Cylinder Lock Segment

3

614350-03

3

614350-04

3

614350-09

14

Lock Segment Retaining Ring

1

049416-03

1

049416-04

1

049416-10

15

Support Plate

1

2010341-03

1

2010341-07

1

2010341-13

16

Top Trash Seal

1

046045-11

1

046045-12

1

046045-15

17

Actuator Screw Bearing

8

644868-01

8

644868-01

8

644868-02

29

Anchor Shackle

4

701004

4

663311-13

4

663311-13

30

Inner Cylinder Stud

6

046037-17

8

046037-19

12

046037-26

31

Inner Cylinder Nut

6

049800-04

8

049800-05

12

049800-05

32

Stud

--

---

--

---

--

--

33

Nut

--

---

--

---

--

--

34

Lock Ring Access Port Plug

2

235539-64

2

005930-07-10

2

614271-02

35

Hydraulic Port Plug

2

005930-05-10

2

005930-05-10

2

005930-05-10

36

Pusher Plate Screw

24

046052-06

24

046052-07

24

046052-10

37

Actuator Ring Stop Screw

4

049477-01

4

049477-01

4

046052-01

38

Lifting Eye*

4

011849

4

011849

--

--

39

Lifting Eye*

4

012185-03

4

012185-03

4

012185-03

40

Lifting Eye*

2

012185-01

2

012185-02

4

012185-02

41

Lifting Eye*

4

012185-02

--

---

4

011849

42

Lifting Eye*

2

700735

--

---

--

--

*Not shown on the drawing **These items are sold as a subassembly (packer & donut) +CAMULARä

Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

145

© 2006 Cameron International Corporation

11” 3000 - 15,000 psi WP D and DL Annular BOP Part Numbers

Item

11” 3000and 5000 psi

Description

11” 10,000 psi

11” 15,000 psi

Qty

Part Number

Qty

Part Number

Qty

Part Number

43

Stud

--

---

--

---

--

--

44

Nut

--

---

--

---

--

--

45

Bushing Retaining Screw

4

702514-25-20-08

4

702514-25-20-08

4

702514-25-20-08

46

Oil Injection Fitting

2

700594

2

700594

2

700594

47

Lifting Eye*

2

701960

--

---

--

--

50

Support Plate Bearing Ring

1

049122-03

1

049122-04

1

049122-10

51

Piston ID Bearing Ring

1

2010196-17

1

2010196-19

1

2010196-40

52

Inner Cyl. OD Bearing Ring

1

2010196-05

1

2010196-07

1

2010196-58

53

Outer Cyl. ID Bearing Ring

1

2010196-06

1

2010196-08

1

2010196-57

54

Piston OD Bearing Ring

1

2010196-18

1

2010196-20

1

2010196-39

55

Pusher Plate Bearing Ring

1

699345-02

1

699345-06

1

699345-10

56

Outer Cyl. ID Wiper Ring

1

700619

1

700812

1

706452

57

Inner Cyl. OD Wiper Ring

1

700618

1

700811

1

706451

58

Inner Cylinder ID Lip Seal

1

615850-15-01

1

615850-40-01

1

615850-27-01

59

Inner Cylinder ID Lip Seal

1

615850-14-01

1

615850-41-01

1

615850-28-01

60

Inner Cylinder OD Lip Seal

2

615847-17-01

1

615847-38-01

2

615846-21-01

61

Piston ID Lip Seal

1

615851-16-01

1

615851-38-01

1

615850-25-01

62

Piston OD Lip Seal

1

615847-16-01

1

615847-39-01

1

615846-19-01

63

Outer Cylinder ID Lip Seal

2

615851-17-01

1

615851-37-01

2

615850-26-01

64

Outer Cylinder OD Lip Seal

1

615846-03-01

--

---

--

--

65

Outer Cylinder OD Lip Seal

1

615846-04-01

1

615846-27-01

1

615846-20-01

66

Top ID Lip Seal

1

615850-13-01

1

615850-38-01

1

615850-29-01

67

Top OD Lip Seal

1

706258-02

1

706258-03

1

706258-14

68

Outer Cylinder ID Lip Seal

--

---

1

615850-39-01

--

--

69

Inner Cylinder OD Lip Seal

--

---

1

615846-28-01

--

--

75

Inner Cyl. ID Backup Ring*

2

702645-22-21

--

---

2

702640-32-91

76

Inner Cyl. OD Backup Ring*

4

230266-01-00-16

--

---

--

--

77

Outer Cyl. ID Backup Ring*

--

---

--

---

--

--

78

Top ID Backup Ring*

--

---

--

---

--

--

***

Complete Replacement Kit

1

049742-09

1

049742-10

--

--

*Not shown on the drawing +CAMULARä

Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

146

© 2006 Cameron International Corporation

13-5/8” 5000 - 16-3/4” 5000 psi WP D and DL Annular BOP Part Numbers

Item

13-5/8” 5000 psi

Description

13-5/8” 10,000 psi

16-3/4” 3000 and 5000 psi

Qty

Part Number

Qty

Part Number

Qty

Part Number

3

Piston

1

699333-05

1

699333-06

1

699333-18

4

Inner Cylinder Head

1

699334-05-02

1

699334-30

1

699334-18

5

Outer Cylinder Head

1

699335-05

1

699335-30

1

699335-18

6

Pusher Plate

1

699336-05

1

699336-06

1

699336-18

7

Donut and Packer**

1

644856-06-00-03

1

644856-07-00-01+

1

644800-18-00-01+

9

Lock Ring

1

699337-05

1

699337-30

1

699337-18

10

Actuator Ring

1

699338-05

1

699338-30

1

699338-18

11

Actuator Screw

4

049089-01

4

049089-02

4

049089-02

12

Actuator Screw Bushing

4

699343-01

4

699343-02

4

699343-02

13

Outer Cylinder Lock Segment

3

614350-05

3

614350-01

3

614350-07

14

Lock Segment Retaining Ring

1

049416-05

1

049416-01

1

049416-07

15

Support Plate

1

2010341-05

1

2010341-06

1

2010341-12

16

Top Trash Seal

1

046045-01

1

046045-09

1

046045-08

17

Actuator Screw Bearing

8

644868-01

8

644868-02

8

644868-02

29

Anchor Shackle

4

663311-13

4

663311-13

4

663311-13

30

Inner Cylinder Stud

6

046037-19

12

046037-20

8

046037-25

31

Inner Cylinder Nut

6

049800-05

12

049800-05

8

049800-06

32

Stud

--

---

--

---

--

---

33

Nut

--

---

--

---

--

---

34

Lock Ring Access Port Plug

2

005930-07-10

2

005930-08-10

2

614271-01

35

Hydraulic Port Plug

2

005930-05-10

2

005930-06-10

2

005930-06-10

36

Pusher Plate Screw

24

046052-08

24

046052-09

24

046052-09

37

Actuator Ring Stop Screw

4

046052-01

4

046052-02

4

046052-02

38

Lifting Eye*

4

011849

4

011849

4

011849

39

Lifting Eye*

4

012185-03

4

700649

4

012185-02

40

Lifting Eye*

4

012185-02

2

012185-01

4

012185-01

41

Lifting Eye*

--

---

4

012185-03

4

700446

42

Lifting Eye*

--

---

2

700446

--

---

*Not shown on the drawing **These items are sold as a subassembly (packer & donut) +CAMULARä

Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

147

© 2006 Cameron International Corporation

13-5/8” 5000 - 16-3/4” 5000 psi WP D and DL Annular BOP Part Numbers

Item

13-5/8” 5000 psi

Description

13-5/8” 10,000 psi

16-3/4” 3000 and 5000 psi

Qty

Part Number

Qty

Part Number

Qty

Part Number

43

Stud

--

---

--

---

--

---

44

Nut

--

---

--

---

--

---

45

Bushing Retaining Screw

4

702514-25-20-08

4

702514-25-20-08

4

702514-25-20-08

46

Oil Injection Fitting

4

700594

2

700594

2

700594

47

Lifting Eye*

--

---

--

---

--

---

50

Support Plate Bearing Ring

1

049122-05

1

049122-06

1

049122-08

51

Piston ID Bearing Ring

1

2010196-21

1

2010196-23

1

2010196-38

52

Inner Cyl. OD Bearing Ring

1

2010196-09

1

2010196-11

1

2010196-25

53

Outer Cyl. ID Bearing Ring

1

2010196-10

1

2010196-12

1

2010196-26

54

Piston OD Bearing Ring

1

2010196-22

1

2010196-24

1

2010196-37

55

Pusher Plate Bearing Ring

1

699345-01

1

699345-03

1

699345-07

56

Outer Cyl. ID Wiper Ring

1

700320

1

700319

1

700994

57

Inner Cyl. OD Wiper Ring

1

700581

1

700320

1

700993

58

Inner Cylinder ID Lip Seal

1

615850-21-01

1

615850-32-01

1

615850-44-01

59

Inner Cylinder ID Lip Seal

1

615850-20-01

1

615850-33-01

1

615850-45-01

60

Inner Cylinder OD Lip Seal

2

615847-22-01

1

615847-40-01

2

615846-27-01

61

Piston ID Lip Seal

1

615851-23-01

1

615850-30-01

1

615850-46-01

62

Piston OD Lip Seal

1

615847-21-01

1

615846-22-01

1

615846-29-01

63

Outer Cylinder ID Lip Seal

2

615851-24-01

2

615850-31-01

1

615850-43-01

64

Outer Cylinder OD Lip Seal

1

615846-10-01

1

615846-23-01

--

---

65

Outer Cylinder OD Lip Seal

1

615846-11-01

1

615846-24-01

--

--

66

Top ID Lip Seal

1

615850-19-01

1

615850-34-01

1

615850-42-01

67

Top OD Lip Seal

1

706258-07

1

706258-10

1

706258-09

68

Outer Cylinder ID Lip Seal

--

---

1

615851-28-01

--

---

69

Inner Cylinder OD Lip Seal

--

---

1

615846-25-01

--

---

75

Inner Cyl. ID Backup Ring*

--

---

--

---

--

---

76

Inner Cyl. OD Backup Ring*

--

---

--

---

--

---

77

Outer Cyl. ID Backup Ring*

--

---

--

---

--

---

78

Top ID Backup Ring*

--

---

--

---

--

---

***

Complete Replacement Kit

1

049742-06

1

049742-12

1

049742-08

*Not shown on the drawing +CAMULARä

Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

148

© 2006 Cameron International Corporation

18-3/4” 5000 - 18-3/4" 10,000 psi WP D and DL Annular BOP Part Numbers Item 3 4 5 6 7 9 10 11 12 13 14 15 16 17 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Description Piston Inner Cylinder Head Outer Cylinder Head Pusher Plate Donut and Packer** Lock Ring Actuator Ring Actuator Screw Actuator Screw Bushing Outer Cylinder Lock Segment Lock Segment Retaining Ring Support Plate Top Trash Seal Actuator Screw Bearing Anchor Shackle Inner Cylinder Stud Inner Cylinder Nut Stud Nut Lock Ring Access Port Plug Hydraulic Port Plug Pusher Plate Screw Actuator Ring Stop Screw Lifting Eye* Lifting Eye* Lifting Eye* Lifting Eye* Lifting Eye*

Qty 1 1 1 1 1 1 1 4 4 3 1 1 1 8 4 16 16 --2 2 24 4 4 4 2 4 --

18-3/4” 5000 psi Part Number 699333-44 699334-44 699335-44 699336-44 2231480-09-00-01 699337-44 699338-44 049089-04 699343-04 614350-13 049416-09 2010341-17 046045-22 644868-02 663311-13 046037-32 049800-07 ----614271-02 005930-06-10 046052-14 046052-02 011849 700649 012185-03 012185-02 ---

Qty 1 1 1 1 1 1 1 4 4 3 1 1 1 8 4 16 16 --2 2 24 4 4 4 1 4 --

18-3/4” 10,000 psi Part Number 699333-21 699334-21 699335-21 699336-21 644856-01-00-01+ 699337-21 699338-21 049089-02 699343-02 614350-06 049416-06 615483-01 046045-16 644868-02 663311-13 046037-27 049800-07 ----614271-01 005930-07-10 644535-01 046052-02 011849 700649 615484-01^ 012185-02 ---

*Not shown on the drawing **These items are sold as a subassembly (packer & donut) ***Exploded view is not representative of this assembly +CAMULARä ^Wear Plate - Not Lifting Eye

Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

149

© 2006 Cameron International Corporation

18-3/4” 5000 - 18-3/4” 10,000 psi WP D and DL Annular BOP Part Numbers Item 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 75 76 77 78 ***

Description Stud Nut Bushing Retaining Screw Oil Injection Fitting Lifting Eye* Support Plate Bearing Ring Piston ID Bearing Ring Inner Cyl. OD Bearing Ring Outer Cyl. ID Bearing Ring Piston OD Bearing Ring Pusher Plate Bearing Ring Outer Cyl. ID Wiper Ring Inner Cyl. OD Wiper Ring Inner Cylinder ID Lip Seal Inner Cylinder ID Lip Seal Inner Cylinder OD Lip Seal Piston ID Lip Seal Piston OD Lip Seal Outer Cylinder ID Lip Seal Outer Cylinder OD Lip Seal Outer Cylinder OD Lip Seal Top ID Lip Seal Top OD Lip Seal Outer Cylinder ID Lip Seal Inner Cylinder OD Lip Seal Inner Cyl. ID Backup Ring* Inner Cyl. OD Backup Ring* Outer Cyl. ID Backup Ring* Top ID Backup Ring* Complete Replacement Kit

Qty --4 4 -1 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1 ------1

18-3/4” 5000 psi Part Number ----702514-25-20-08 700594 --049122-11 2010196-49 2010196-50 2010196-51 2010196-52 699345-14 708000 708003 615851-01-01 615850-04-01 615846-05-01 615850-03-01 615846-01-01 615850-02-01 615846-02-01 615850-01-01 706258-13 702645-32-91 ------049742-16

Qty --4 2 -1 1 1 1 1 1 1 1 1 1 2 1 1 2 -1 1 1 --2 --1 1

18-3/4” 10,000 psi Part Number ----702514-25-20-08 700594 --615482-01 2010196-29 2010196-47 2010196-48 2010196-30 699345-13 705710 705711 615851-02-01 615850-08-01 615846-16-01 615850-09-01 615846-15-01 615850-07-01 --615846-14-01 615850-01-01 2724543-01 ----702645-32-91 ----615378-01 049742-17

Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

150

© 2006 Cameron International Corporation

20-3/4” 3000 - 21-1/4” 5000 psi WP D and DL Annular BOP Part Numbers Item 3 4 5 6 7 9 10 11 12 13 14 15 16 17 29 30 31 32 33 34 35 36 37 38 39 40 41 42

Description Piston Inner Cylinder Head Outer Cylinder Head Pusher Plate Donut and Packer** Lock Ring Actuator Ring Actuator Screw Actuator Screw Bushing Outer Cylinder Lock Segment Lock Segment Retaining Ring Support Plate Top Trash Seal Actuator Screw Bearing Anchor Shackle Inner Cylinder Stud Inner Cylinder Nut Stud Nut Lock Ring Access Port Plug Hydraulic Port Plug Pusher Plate Screw Actuator Ring Stop Screw Lifting Eye* Lifting Eye* Lifting Eye* Lifting Eye* Lifting Eye*

Qty 1 1 1 1 1 ------1 --4 16 16 20 20 2 -24 4 2 2 ----

20-3/4” *** 3000 psi Part Number 699333-47-00-02 699334-47 644172-01-00-02 699336-47-00-02 644800-47-00-02+ ------------2010341-18 ----663311-13 046037-34 049800-12 005919-08-10 270900-18-09 005930-06-10 --046052-15 046052-16 700649 012185-02 -------

Qty 1 1 1 1 1 ------1 --4 12 12 24 24 2 -24 4 2 4 ----

21-1/4” *** 2000 psi Part Number 699333-47-00-02 699334-47 644172-01-00-02 699336-47-00-02 644800-47-00-02+ ------------2010341-18 ----663311-13 046037-34 049800-12 006306-16-10 2709000-15-09 005930-16-10 --046052-15 046052-16 700649 012185-02 -------

Qty 1 1 1 1 1 ------1 --4 16 16 20 20 2 -24 16 2 2 ----

21-1/4” *** 5000 psi Part Number 699333-47-00-02 699334-47-00-02 644172-01-00-02 699336-47-00-02 2231480-48 ------2010341-18 --663311-13 046037-34 049800-12 219067-18-11-51 2709000-18-01 005930-06-10 -046052-15 046052-16 700649 012185-02 ----

*Not shown on the drawing **These items are sold as a subassembly (packer & donut) ***Exploded view is not representative of this assembly +CAMULARä

Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative. TC1001-06

151

© 2006 Cameron International Corporation

20-3/4” 3000 - 21-1/4” 5000 psi WP D and DL Annular BOP Part Numbers Item

20-3/4” *** 3000 psi

Description

21-1/4” *** 2000 psi

21-1/4” *** 5000 psi

Qty

Part Number

Qty

Part Number

43

Stud

36

615447-01-10

24

615447-02-10

Qty

Part Number

44

Nut

36

2709000-19-09

24

45

Bushing Retaining Screw

--

---

--

2709000-19-09

36

2011346-26-05

---

36

2011924-01

46

Oil Injection Fitting

--

---

--

---

--

--

47

Lifting Eye*

--

---

--

---

--

--

50

Support Plate Bearing Ring

1

049122-12

1

049122-12

1

049122-12

51

Piston ID Bearing Ring

1

2010196-53

1

2010196-53

1

2010196-53

52

Inner Cyl. OD Bearing Ring

1

2010196-54

1

2010196-54

1

2010196-54

53

Outer Cyl. ID Bearing Ring

1

2010196-55

1

2010196-55

1

2010196-55

54

Piston OD Bearing Ring

1

2010196-56

1

2010196-56

1

2010196-56

55

Pusher Plate Bearing Ring

--

---

--

---

--

--

56

Outer Cyl. ID Wiper Ring

1

708843

1

708843

1

708843

57

Inner Cyl. OD Wiper Ring

1

615399-12

1

615399-12

1

615399-12

58

Inner Cylinder ID Lip Seal

1

615851-03-01

1

615851-03-01

1

615851-03-01

59

Inner Cylinder ID Lip Seal

1

615851-03-01

1

615850-12-01

1

615850-12-01

60

Inner Cylinder OD Lip Seal

1

615850-12-01

1

615846-18-01

2

615846-18-01

61

Piston ID Lip Seal

1

615850-11-01

1

615850-11-01

1

615850-11-01

62

Piston OD Lip Seal

1

615846-17-01

1

615846-17-01

1

615846-17-01

63

Outer Cylinder ID Lip Seal

--

---

--

---

--

--

64

Outer Cylinder OD Lip Seal

--

--

--

--

65

Outer Cylinder OD Lip Seal

2

615850-10-01

2

615850-10-01

2

615850-10-01

66

Top ID Lip Seal

--

---

--

---

--

--

67

Top OD Lip Seal

--

---

--

---

--

--

68

Outer Cylinder ID Lip Seal

--

---

--

---

2

2752121-20-22

69

Inner Cylinder OD Lip Seal

--

---

--

---

--

--

75

Inner Cyl. ID Backup Ring*

--

---

--

---

--

--

76

Inner Cyl. OD Backup Ring*

--

---

--

---

--

--

77

Outer Cyl. ID Backup Ring*

--

---

--

---

--

--

78

Top ID Backup Ring*

--

---

--

---

--

--

***

Complete Replacement Kit

1

049742-18

1

049742-18

Note: Part numbers shown are based on a generic assembly, please verify replacement part numbers for your particular assembly.

If you require parts certified to API 16A, Please verify part numbers with your local Cameron representative.

TC1001-06

152

© 2006 Cameron International Corporation

DL Annular BOP Replacement Part Kits For popular size DL BOPs, a BOP replacement parts kit is available to provide all seals, bearings and scrapers required during normal maintenance. Kit parts are shrink-film packed to prevent loss and assure long shelf life and are less expensive than individual parts. All parts in each kit are identified with part numbers and parts list index numbers. As an optional replacement for the standard lip seal design, a D-shaped seal is available for service in annular BOPs that have pitted, corroded or oversized seal grooves. To enhance the performance life of the used annular BOP, this seal design will fill most voids created by excessive wear and tear to the seal groove. Seal kits have been created which include all the operating system seals for the annular BOPs listed below. Annular BOP Replacement Part Kit Part Numbers BOP Size

Pressure Rating (psi)

Replacement Kit

“D” Seal Kit

7-1/16”

3000, 5000

049742-01

---

7-1/16”

10,000

049742-02

---

7-1/16”

15,000

049742-13

---

7-1/16”

20,000

049742-03

---

11”

3000, 5000

049742-09

---

11”

10,000

049742-10

---

11"

15,000

049742-14

---

13-5/8”

5000

049742-11

2010006-01

13-5/8”

10,000

049742-12

2010006-05

16-3/4”

3000, 5000

049742-08

---

18-3/4”

5000

049742-16

2010006-04

18-3/4" (Dual)

5000

049742-16-01

2010006-04

18-3/4”

10,000

049742-17

2010006-03

20-3/4”

3000

049742-18

---

21-1/4”

2000

049742-18

---

21-1/4"

5000

049742-18

---

TC1001-06

153

© 2006 Cameron International Corporation

Replacement Part Kit Components Item Number

Quantity

16

1

Top Trash Seal

17

8

Actuator Screw Bearing

50

1

Inner Cylinder Head Ring

51

1

Bearing

52

1

Bearing

53

1

Bearing

54

1

Bearing

55

1

Wear Ring

56

1

Wiper Ring

57

1

Wiper Ring

58

1

Seal Ring

59

1

Seal Ring

60

2

Seal Ring

61

1

Seal Ring

62

1

Seal Ring

63

2

Seal Ring

64

1

Seal Ring

65

1

Seal Ring

66

1

Seal Ring

67

1

Seal Ring

TC1001-06

Description

154

© 2006 Cameron International Corporation

Annular Stripper Packer Cameron’s Stripper Packer is designed to permit stripping of a 6-5/8” drill pipe and tool joint through the Cameron DL Annular. To accomplish the stripping function, the packer metal inserts tips have been cut back to allow the drill pipe to pass through the closed packer without contacting the metal inserts. This special packer is not rated for 10,000 psi service on any size drill pipe because the tops of the anti-extrusion inserts have been cut back. Because this is a special service packing element, it is not tested in accordance with API 16A. Annular BOP Stripper Packer BOP Size

Pressure Rating (psi)

Stripper Packer

18-3/4"

10,000**

2164645-01

**Packer is designed for the 18-3/4" 10,000 DL Annular, but is not rated for 10,000 psi service. Pressure testing of the packing element is limited to 5000 psi on 5" and 6-5/8" drill pipe mandrels.

Severe Service Annular Packer Cameron’s Severe Service Annular Packing element subassemblies are designed for elevated temperatures (maximum of 250 degrees F.) and up to 35% H2S. The severe service packers/donuts are molded using CAMLAST elastomers. Limited sizes and working pressure are available.

Severe Service Annular BOP Packer/Donut Subassembly BOP Size

Pressure Rating (psi)

Stripper Packer

13-5/8"

5000

644906-06-00-01

Higher Temperatures For temperatures greater than 250OF, and high H2S levels, CAMULAR severe service elastomer is recommended. The DL Annular BOP packing element comes only as a complete subassembly, which includes packer and donut. Contact your local Cameron representative for details. CAMULAR part numbers are listed on pages 129-136. Please contact your local Cameron Representative for severe service packer information.

TC1001-06

155

© 2006 Cameron International Corporation

Clamp Connections (1-13/16” 10,000 - 7-1/16” 20,000 psi)

Bearing Ring Load Ring Nut Washer Detail

SD 034626

Forged Thru-Bolt Cameron Clamp Part Numbers Bore Size and Working Pressures (psi)

Seal Ring Number

Clamp Part No. 644021 (2 req’d.)

Bolt Part No. (4 req’d.)

Cameron Wrench Part No.

BX

AX

CX

1-13/16” 10,000

20

151

--

--

615236-01

( )-01

702533-08-10-70 2709000-09-01 697491-05

697492-05

--

713114-01

1-13/16” 15,000

20

151

--

--

615236-02

( )-02

702533-08-10-80 2709000-09-01 697491-05

697492-05

--

713114-01

1-13/16” 20,000

--

151

--

--

615236-03

( )-03

702533-09-10-90 2709000-10-01 697491-06

697492-06

--

713114-04

2-1/16” 5000

24

152

--

--

615236-01

( )-01

702533-08-10-70 2709000-09-01 697491-05

697492-5

--

713114-01

2-1/16” 10,000

24

152

--

--

615236-02

( )-02

702533-08-10-80 2709000-09-01 697491-05

697492-05

--

713114-01

2-1/16” 15,000

24

152

--

--

615236-03

( )-03

702533-09-10-90 2709000-10-01 697491-06

697492-06

--

713114-04

2-1/16” 20,000

--

152

--

--

615236-03

( )-03

702533-09-10-90 2709000-10-01 697491-06

697492-06

--

713114-04

2-9/16” 5000

27

153

--

--

615236-02

( )-02

702533-08-10-80 2709000-09-01 697491-05

697492-05

--

713114-01

2-9/16” 10,000

27

153

--

--

615236-04

( )-04

702533-09-10-82 2709000-10-01 697491-06

697492-06

--

713114-04

2-9/16” 15,000

27

153

--

--

615236-03

( )-03

702533-09-10-90 2709000-10-01 697491-06

697492-06

--

713114-04

2-9/16” 20,000

--

153

--

--

615236-06

( )-06

697491-07

697492-07

--

713114-05

3-1/8” 5000

35

154 041700-27

--

615236-04

( )-04

702533-09-10-82 2709000-10-01 697491-06

697492-06

--

713114-04

3-1/8” 10,000

35

154 041700-25

--

615236-05-00-07 ( )-05-00-06 702533-09-10-82 2709000-10-01 697491-06

713114-04

3-1/8” 15,000

35

154 041700-25

--

615236-06

( )-06

3-1/8” 20,000

--

154

--

--

615236-08

( )-08

4-1/16” 5000

39

155

--

--

615236-05-00-07 ( )-05-00-06 702533-09-10-82 2709000-10-01 697491-06

697492-06

--

713114-04

4-1/16” 10,000

39

155 041700-24

--

615236-06-00-11 ( )-06-00-09 702533-10-10-93 2709000-11-01 697491-07

697492-07

--

713114-05

4-1/16” 15,000

--

155

--

--

615236-08

( )-08

702533-13-11-32 2709000-14-01 697491-10

697492-10

--

713114-08

4-1/16” 20,000

--

155

--

--

615236-10

( )-10

702533-14-11-61 2709000-15-01 697491-11

697492-11

*

713114-09

012955-53-10

Load Ring Part No. (8 req’d.)

Safety Hoist

RX

709949

Nut Part No. (8 req’d.)

Bearing Ring Part No. (8 req’d.)

Clamp Assembly Part No.

697492-06

--

697491-07

697492-07

--

713114-05

702533-13-11-32 2709000-14-01 697491-10

697492-10

--

713114-08

709949

012955-53-10

7-1/16” 2000

45

--

--

--

615236-25

( )-25

702533-08-10-82 2709000-09-01 697491-05

697492-05

--

713114-01

7-1/16” 5000 (RX)

46

--

041700-02

--

615236-07

( )-07

702533-12-11-20 2709000-13-01 697491-09

697492-09

--

713114-07

7-1/16” 5000 (BX)

--

156

--

--

615236-08

( )-08

702533-13-11-32 2709000-14-01 697491-10

697492-10

--

713114-08

7-1/16” 10,000 (RX)

46

--

--

--

615236-08

( )-08

702533-13-11-32 2709000-14-01 697491-10

697492-10

--

713114-08

7-1/16” 10,000 (BX)

--

156

--

--

615236-10

( )-10

702533-14-11-61 2709000-15-01 697491-11

697492-11

*

713114-09

7-1/16” 15,000 (RX)

46

--

--

--

615236-10

( )-10

702533-14-11-61 2709000-15-01 697491-11

697492-11

*

713114-09

7-1/16” 15,000 (BX)

--

156

--

--

615236-22

( )-22

702533-19-11-80 2709000-19-01 697491-12

697492-12

**

713114-13

7-1/16” 20,000

--

156

--

--

615236-15

( )-15

702533-21-11-91 2709000-20-01 697491-04

697492-04

**

713114-14

*(6) 650696-01 Safety Hoist; (6) 712193 Screw **(4) 650696-01 Safety Hoist; (4) 712193 Screw and (2) 650704-01 Safety Hoist; (2) 712193 Screw

TC1001-06

156

© 2006 Cameron International Corporation

Clamp Connections (9” 5000 - 36” 1000 psi) Forged Thru-Bolt Cameron Clamp Part Numbers Clamp Seal

Clamp

and

Ring

Assembly

644021

Part No.

Part No.

Part No.

Bearing Ring Part No.

Working Pressures

Number

Part No.

(2 Reqd)

(4 Reqd)

(8 Reqd)

(8 Reqd)

(8 Reqd)

Bore Size

(psi)

Part No.

Bolt

Nut

Load Ring

Safety

Cameron

Hoist

Wrench Part No.

RX BX

AX

CX

9" 5000

50 157

——-

—-

615236-08

( )-08

702533-13-11-32 2709000-14-01

697491-10

697492-10 ——-

713114-08

9" 10,000

49 157

——-

—-

615236-10

( )-10

702533-14-11-61 2709000-15-01

697491-11

697492-11

*

713114-09

11" 3000

53 —- 041700-06 —-

615236-09

( )-09

702533-12-11-30 2709000-13-01

697491-09

697492-09

*

713114-07

11" 5000

54 158 041700-08 —-

615236-10

( )-10

702533-14-11-61 2709000-15-01

697491-11

697492-11

*

713114-09

11" 10,000

—- 158 041700-08 —-

615236-22

( )-22

702533-19-11-80 2709000-19-01

697491-12

697492-12

**

713114-13

11" 15,000

—- 158

——-

—-

615236-15

( )-15

702533-21-11-91 2709000-20-01

697491-04

697492-04

**

713114-14

11" 20,000

—- —-

—-

—-

615236-28

( )-28

702533-25-12-60

697491-01

697492-01

***

——-

13-5/8" 3000

57 —- 041700-11 —-

615236-11

( )-11

702533-12-11-50 2709000-13-01

697491-09

697492-09

*

713114-07

13-5/8" 5000

57 160 041700-13 —-

615236-13

( )-13

2709000-19-01

697491-12

697492-12

**

713114-13

13-5/8" 10,000

57 159 041700-15

13

615236-15

( )-15

702533-21-11-91 2709000-20-01

697491-04

697492-04

**

713114-14

13-5/8" 15,000

—- 159

13

615236-28

( )-28

702533-25-12-60

697491-01

697492-01

***

——-

16-3/4" 2000

65 —- 041700-17 —-

615236-12

( )-12

702533-12-11-50 2709000-13-01

697491-09

697492-09

*

713114-07

16-3/4" 3000

66 —-

—-

615236-14

( )-14

702533-14-11-81 2709000-15-01

697491-11

697492-11

*

713114-09

16-3/4" 5000

—- 162 041700-19 —-

615236-19

( )-19

702533-21-12-32 2709000-20-01

697491-04

697492-04

**

713114-14

16-3/4" 10,000

—- 162

——-

—-

615236-28

( )-28

702533-25-12-60

049800-11

697491-01

697492-01

***

——-

18-3/4" 10,000

—- 164

——-

18 615236-27-00-04 ( )-27-00-05

707902

2709000-23-01

697491-03

697492-03

***

——-

18-3/4" 15,000

—- 164

——-

18

( )-26

709446

644076-01

697491-02

697492-02

***

——-

18-3/4" 15,000+ (HBC) —- 164

——-

18

615236-32

( )-32

644970-01-00-01

645015-01

697491-14* 697492-14*

***

——-

20-3/4" 2000

73 —-

——-

—-

615236-18

( )-18

702533-19-12

2709000-19-01

697491-12

697492-12

**

713114-13

20-3/4" 3000

74 —-

——-

—-

615236-18

( )-18

702533-19-12

2709000-19-01

697491-12

697492-12

**

713114-13

21-1/4" 2000

73 —-

——-

—-

615236-18

( )-18

702533-19-12

2709000-19-01

697491-12

697492-12

**

713114-13

21-1/4" 5000

—- 165

——-

21 615236-27-00-04 ( )-27-00-05

707902

2709000-23-01

697491-03

697492-03

***

——-

21-1/4" 7500

—- 166

——-

21

615236-26

( )-26

709446

644076-01

697491-02

697492-02

***

——-

21-1/4" 10,000

—- 166

——-

21

615236-26

( )-26

709446

644076-01

697491-02

697492-02

***

——-

24-1/4" 1000

—- —-

——-

—-

615236-21

( )-21

702533-11-11-50 2709000-12-01

697491-08

697492-08

*

713114-06

30-1/2" 1000

—- —-

——-

—-

615236-20

( )-20

702533-13-11-70 2709000-14-01

697491-10

697492-10

***

713114-08

34" 1000

—- —-

——-

—-

615236-24

( )-24

702533-14-11-80 2709000-15-01

697491-11

697492-11

***

713114-09

36" 1000

—- —-

——-

—-

615236-23

( )-23

702533-19-12-12 2709000-19-01

697491-12

697492-12

***

713114-13

——-

——-

615236-26

702533-19-12

049800-11

049800-11

* (6) 650696-01 Safety Hoist; (6) 712193 Screw ** (4) 650696-01 Safety Hoist; (4) 712193 Screw and (2) 650704-01 Safety Hoist; (2) 712193 Screw *** (6) 700414 Safety Hoist **** (6) 650704-01 Safety Hoist; (6) 712192 Screw

TC1001-06

157

© 2006 Cameron International Corporation

F Cup Tester The Cameron F cup-type tester is attached to drill pipe and lowered into the casing below the wellhead to pressure test the blowout preventer stack and the wellhead. The tester is rated to the API standard mill test pressure of the casing in which it is used. This rating can be as high as 10,000 psi. Cups with special reinforcing can be provided for any size and weight of casing to hold test pressure up to 15,000 psi. Internal flush tool joint threads are provided on standard testers. Other tool joint threads are available upon request.

Top

Total

and

Load

Bottom

Capacity **

Connection 2-3/8" Int Flush

3-1/2" Int Flush

4-1/2" Int Flush

270,000 lb

500,000 lb

800,000 lb

Part Number

Casing Cup Pressure Area Sq. In. Size

Weight

Complete Assembly

Cup

Mandrel

Sub

O-Ring

030589

030590

702645-22-01

030595

030596

702645-33-41

030603

030604

702645-34-41

Range lb/ft

4-1/2"

All

9.5

030594-01

030591

5"

All

12.4

030594-02

030592

5-1/2"

All

16.0

030594-03

030593

6-5/8"

All

18.6

030605-01

030597

7"

17 - 26

23.5

030605-02

030598-02

7"

29 - 38

20.4

030605-03

030598-01

7-5/8"

24 - 26.4

28.8

030605-04

030599-01

7-5/8"

29.7 - 39

27.5

030605-05

030599-02

8-5/8"

24 - 36

32.5

030600-03

030606-02

8-5/8"

40 - 49

29.4

030600-04

030606-01

9-5/8"

32.3 - 40

44.1

030600-01

030601-01

9-5/8"

43.5 - 53.5

42.4

030600-02

030601-02

10-3/4"

32.75 - 51

63.8

030600-05

030607-01

10-3/4"

55.5 - 65.7

58.9

030600-06

030607-02

13-3/8"

48 - 61

109.5

030600-07

030579-02

13-3/8"

68 - 72

103.3

030600-08

030579-01

16"

All

165.0

030600-09

030584

18-5/8"

All

230.0

30600-12

674819

20"

78.6 - 129.3

300.0

30600-10

033543

* Threads per API Std. 7, box up, pin down. Testers with other thread sizes are available at extra cost. When other threads are used, a check should be made to see if total load capacity of tester is reduced. ** Total load capacity equals cup pressure area times test pressure, plus weight of suspended pipe. *** Cups with special reinforcing can be provided for any size and weight of casing to hold test pressure up to 15,000 psi.

TC1001-06

158

TOP OIL SERVICES - REYNOSA Oficina: (899) 923 0934, 925 3432 Cel. 899 120 9879 899 120 9878 NEXTEL: 72*725565*4 72*725565*12 TOP OIL SERVICES - POZA RICA Oficina: (782) 825 1985 Cel. 782 528 6763 782 133 1897 NEXTEL: 72*725565*6 72*725565*15 TOP OIL SERVICES - COMALCALCO Celular: (933) 107 6901 Cel. 933 110 2997 933 129 7773 NEXTEL: 72*725565*25 72*725565*13

FACEBOOK.COM/TOPOILSERVICES