Taza THE - SNOWMAN - MUG

 

 

THE SNOWMAN MUG Crochet pattern 

DESIGNED BY ELENA DOROGINA Facebook: Doroginatoys; Instagram: @dorogina_t @dorogina_toys oys   1

 

Thank you for purchasing my pattern! Enjoy crocheting. This pattern is a work of authorship, and it intends only for personal use! I appreciate it if you do not share, reproduce or sell this pattern, either in its entirety or in parts!

Note! Please, note that this pattern does not include the lessons of crocheting. You must have previous knowledge of crochet techniques. You are welcome to sell the ready product made with this pattern, but credit @dorogina_toys  is appreciated. Put hashtag #dorogina_toys for me to see your ready toy.

CROCHET ABBREVIATIONS (US): MG  –  – magic ring CH  – chain SC – single crochet DC  –  double crochet DC – HDC – half double crochet INC  –  – increase (make 2 sc into one loop) DEC – decrease (two sc together through front loops) SL ST – ST  –  slip stitch (…)*8  –  – work instructions within brackets as many times as directed (18)  – the number of sc in the row

THE REQUIRED MATERIALS: DK weight yarn - Yarn Art Jeans (55% cotton/45% acrylic; 50 g/160 m) Yarn Alize Cotton Gold (55% cotton / 45% acrylic; 100g / 330m) Yarn - Alize Softy (100%: Micropolyester 50 g / 115 m)

  Yarn Art Jeans No. 51, 28, 90 (cherry, dark grey, red)  – a mug, a hat



  Yarn Art Jeans No. 35, 70, 69 (yellow, dark brown, green)  – a nose, arms, a



scarf, and decoration

  2

 

               



Alize Cotton Gold No. 62 (white) – a snowman



2.0 mm or 2.25 mm crochet hook

     

 



     

  

Stuffing material (fiberfill/polyester) Tapestry needle Scissors Stitch markers (a scrap of contrasting yarn) Pins Two cardboard circles for the bottom of a mug, about 5.8 - 6 cm (2. (2.3 3 - 2.4 inches) A piece of wire 7-8 cm (3 inches) long, 3 pieces - for a handle of the mug and arms of a snowman Adhesive tape to secure the wireframe ends Pliers Sewing black thread for the embroidery of the eyes

NOTE! Yarn consumption, size, and appearance of the toy depend on crochet density and how you hold the yarn. crochet:  The presented toy is crocheted with V and X look single crochet:  (First, you grab yarn over the hook, and for making the second stitch grab it under the hook). The finished snowman using the materials stated in this pattern is ~6 inches/15 cm in height and ~7.8 inches/20 cm in height with a hat.  Make sure you crochet tight enough, otherwise, the stuffing will show through the holes. Crochet the toy in spirals without turning chains.

MUG Yarn Art Jeans No. 51 - (cherry) Rnd 1:

8 into MR

Rnd 2:

8 inc (16)

Rnd 3:

(1 sc, inc)*8

(24)

Rnd 4:  (2 sc, inc)*8

(32)

Rnd 5:  (3 sc, inc)*8 Rnd 6:  (4 sc, inc)*8

(40) (48)

  3

 

Rnd 7:  (5 sc, inc)*8

(56)

Rnd 8:  (6 sc, inc)*8

(64)

Rnd 9:  (7 sc, inc)*8

(72)

Rnd 10:  (8 sc, inc)*8

(80)

Rnds 11-28:  80 sc (18 rounds) * Crochet the next round through front loops only. Rnd 29:  80 sc * Crochet the next round through both loops. Rnd 30:  80 sc

Trace the bottom of the mug on the cardboard and cut it out. Put the template inside.

Attach dark grey or black yarn. Rnd 31:  80 sc * Crochet the next round through front loops only. Rnd 32:  80 HDC   4

 

SNOWMAN  Attach white yarn to round 29. (Alize Cotton Gold No. 62) 

Rnds 1-5:  80 sc (5 rounds) Rnd 6:  Rnd 7:  Rnd 8: Rnd 9: 

(8 sc, dec)*8 (72) (7 sc, dec)*8 (64) 64 sc (6 sc, dec)*8 (56)

Rnd 10:  (5 sc, dec)*8 Rnd 11:  48 sc

(48)

  5

 

Rnd 12:  (4 sc, dec)*8 (40) Rnd 13:  40 sc

Stuff it with fiberfill.

ARMS  INSERT THE WIREFRAME.

Mark the position on the sides symmetrically using pins. 1. Insert the wireframe into the pinned points. points . 2. Bend the edge of the wire using the pliers. 3. Secure the ends with adhesive tape. 4. Curl the ends of the wireframe. Secure it with adhesive tape. 5. Stuff with fiberfill.

  6

 

Continue crocheting the snowman. Rnd 14:  (4 sc, inc)*8

(48) Rnd 15:  (5 sc, inc)*8 (56) Rnd 16:  (6 sc, inc)*8 (64) Rnd 17:  64 sc Rnd 18:  (7 sc, inc)*8 (72) Rnds 19-26:  72 sc (8 rounds) Rnd 27:  (7 sc, dec)*8 (64) Rnds 28-29:  64 sc (2 rounds) Rnd 30:  (6 sc, dec)*8

(56)

  7

 

Rnd 31:  (5 sc, dec)*8

(48)

Rnd 32:  48 sc Rnd 33:  (4 sc, dec)*8

(40)

Stuff with fiberfill. Rnd 34:  40 sc Rnd 35:  (3 sc, dec)*8

(32)

Rnd 36:  32 sc Rnd 37:  (2 sc, dec)*8 Rnd 38:  (1 sc, dec)*8 Rnd 39:  (2 sc, dec)*4

(24) (16) (12)

Break yarn, leaving a long tail for tightening the hole. Stuff it with fiberfill. Do not tighten the hole!

NOSE  NOSE  Yarn Art Jeans No. 35 - (yellow) Rnd 1:

4 into MR

Rnd 2:

4 inc (8)

Rnds 3-4:  8 sc (2 rounds) Rnd 5:

(1 sc, inc)*4

(12)

Rnd 6:  12 sc, 2 sl st

Break yarn, tighten the hole, and hide the tail inside. Stuff the nose with fiberfill.

2)   ARMS (make 2) Yarn Art Jeans No. 70 - (dark brown) Rnd 1:  6 into MR

(1 sc, inc)*3 (9) Rnds 3-5: 9 sc (3 rounds)

Rnd 2:

In the next round, crochet the thumb. Rnd 6: 4 sc, (DC5tog cluster), 4 sc (9)   8

 

In the illustration below, you see only three loops on the hook. Make five. 

Once you crochet bobble stitch, you need to turn it inside out.   9

 

Rnds 7-20:  9 sc (14 rounds), 2 sl st NOTE! Try on the arm onto the wireframe. Crochet more or fewer rounds if

needed. Break yarn, leaving a long tail for sewing.

BUTTON  Yarn Art Jeans No. 28 - (dark grey) Rnd 1:  6 into MR, 1 sl st

Break yarn.

ASSEMBLY 1. Sew the nose. (Insert the needle and draw it out in the hole on the top of the head). Pin the nose. Split yellow yarn in half and sew it on.

  10

 

The position of the nose: the bottom part is in round 19 from the mug and

the upper part of the nose is in round 22 from the mug.

Tie the ends of the yarn and hide inside the toy.

2. Embroider the eyes and mouth. Pin the position of the eyes. (I mark between rounds 22-23 from the mug. The distance between the eyes is 8 sc, the length is 4 sc and the height of the eye is 1 sc). Embroider the eyes using black thread.

  11

 

Mark the position of the mouth and embroider it with black thread.

  12

 

3. Sew a button.

4. Embroider snowflakes. Mark the borders of the snowflake. s nowflake. Embroider the snowflakes using a white yarn strand. Previously, split it in half.

Snowflake parameters parameters (1 cell = 1 sc)

  13

 

5. Stuff with fiberfill. Tighten the hole using a tapestry needle. Tighten the hole, weaving through each of the 12 front loops of the last round, and pull tight.

Once you weaved through 12 loops, weave through 2-3 loops at once with a tapestry needle. Do not forget to tighten. Repeat 3 times. Cut the excess yarn and hide the yarn tail inside the bear.

6. Sew the arms to the body. 

Secure the wireframe with adhesive tape additionally. Put the ready arms onto the wireframe and sew them to the snowman.

  14

 

MUG HANDLES Yarn Art Jeans No. 51 - (cherry) Chain 12 and form a circle. Crochet in a circle: 12 sc (4 rounds) Rnd 5:  3 sc, 3 dec, 3 sc (9) Rnds 6-21:  9 sc (16 rounds), 1 sl st

Rnds 1-4:

Prepare a wireframe with the same length as the handle. Bend the ends, and secure them with adhesive tape. Insert wireframe into the handle and stuff with fiberfill.   15

 

Bend the handle and sew it to the mug.

LEAF (make 2) Yarn Art Jeans No. 69 (green)

Chain 12, start working in the second chain from a hook in the back

direction- 10 sc, 3 sc in 1 stitch. Continue crocheting on the other side of the chain foundation   – 9 sc, 3 sc in 1 stitch. (25)   16

 

Rnd 2:  (3 sc, chain chain 3, 1 sc in the previous stitch) stitch)*3, 3 sc, chain 3, 1 sc in

the previous stitch, (3 sc, chain 3, 1 sc in the previous stitch)*3, 2 sc, 2 sl st.

Break yarn, leaving a long tail for sewing. Iron the leaves with steam through a damp cloth for a few seconds to make them flat.

  17

 

BERRIES (make 3) Yarn Art Jeans No. 90 (red) Chain 7. Start working in the second chain from a hook 3 Bobble stitches similar to the thumb for the arm of our snowman. Crochet in the second chain  – ((dc4tog cluster), 1 sc)*3 Turn all bobbles inside out. Make 1 sl st in the first bobble. Tie the yarn tails together.

  18

 

HAT Yarn Art Jeans No. 28 - (dark grey) Rnd 1:  8 into MR Rnd 2: 8 inc (16) Rnd 3: (1 sc, inc)*8 Rnd 4: (2 sc, inc)*8 Rnd 5: (3 sc, inc)*8 Rnd 6: (4 sc, inc)*8 Rnd 7: (5 sc, inc)*8 Rnd 8: (6 sc, inc)*8 Rnd 9: (7 sc, inc)*8

(24) (32) (40) (48) (56) (64) (72)

t hrough front posts. * In the next round, crochet through Insert the hook in the first stitch and draw it out through the front post of the second stitch, grabbing the working yarn and making sc. Rnd 10:  72 sc (through front posts) posts)   19

 

* Crochet all the next rounds through both loops.   Rnds 11-20:  72 sc (10 rounds) Rnd 21:  (7 sc, dec)*8 (64) Rnds 22-24:  64 sc (3 rounds)   20

 

Cut a circle of cardboard around the diameter of the th e hat.

* Attach red yarn. Do not break grey yarn. Crochet with red yarn. Rnds 25-29:  64 sc (5 rounds) With dark grey yarn. Rnd 30:  64 sc

* In the next round, crochet through front loops. Rnd 31: 64 sc * In all the next rounds, crochet through both loops. Rnd 32: (1 sc, inc)*32 (96) Rnd 33:  96 sc Rnd 34:  (2 sc, inc)*32 (128) Rnd 35:  128 sc, 2 sl st

Break yarn and tighten. Hide the yarn tail inside the hat. Iron the edges of the hat to keep it flat. Place a damp cloth on top of the brim of your hat and steam it off for a few seconds.

  21

 

SEW THE LEAVES AND BERRIES TO THE HAT

Stuff the hat with fiberfill. Put a hat on the snowman, pin it and sew it with black thread.

  22

 

SCARF Yarn Art Jeans No. 90, 69 - (red, green) Chain 81. Start working in the second chain from hook in the back direction: Rnd 1:

80 HDC, chain 2

 Attach green ya yarn. rn.

Crochet on the other side of the chain foundation: Rnd 2:  80 HDC, 1 sl st

Break yarn and tighten. Hide the yarn tail inside the scarf.

CHRISTMAS BALL ORNAMENT (make 3) Yarn Art Jeans No. 90, 69, 35, 46 - (red, green, yellow, grey). 6 into MR Rnd 2: 6 inc (12) Rnd 3: (1 sc, inc)*6 (18) Rnd 4: (2 sc, inc)*6 (24) Rnds 5-8:  24 sc (4 rounds) Rnd 9: (2 sc, dec)*6 (18) Rnd 10: (1 sc, dec)*6 (12) Rnd 1:

Stuff it with fiberfill.

 Attach grey yarn.  

23

 

* Crochet the next round through front loops only. Rnd 11:  12 sc * Crochet the next round through both loops. Rnds 12-13:  12 sc (2 rounds)

Stuff it with fiberfill. Break yarn, leaving a long tail for tightening the hole or making a loop.

Embroider a snowflake with white thread. Tighten the hole with a tapestry needle. * Tighten the hole, weaving through each of the 12 back loops of the last round, and pull tight.

Make a loop and fasten off. Hide the yarn tail inside.

 

24

 

Congratulation! Your snowman mug is finished!

Thank you for purchasing my pattern. I hope that you liked the pattern and enjoyed crocheting.