System 3 Default Value of Work Tool Parameter

330D L Excavator B6H00001-UP (MACHINE) POWERED BY C9 Engine(SEBP4... Página Página 1 de 8

Shutdown

Previous Screen

Product: EXCAVATOR Model: 330D L EXCAVATOR B6H Configuration: 330D L Excavator B6H00001-UP (MACHINE) POWERED BY C9 Engine

Testing and Adjusting 320D, 323D, 324D, 325D, 328D LCR and 330D Excavators Tool Control System Media Number -RENR7389-0 4

Publication Date -01/04/200 6

Date Updated -20/04/20 06

i02436708

System 3: Default Value of Work Tool Parameters SMCS - 5000 S/N - A3R1-UP S/N - AZP1-UP S/N - B6H1-UP S/N - DHK1-UP S/N - EDX1-UP S/N - FXK1-UP S/N - GTN1-UP S/N - JJG1-UP S/N - JLP1-UP S/N - MEY1-UP S/N - MWP1-UP S/N - NBD1-UP Note: For this system, parameters that are not shown in the tables do not affect the operation of the work tool.

The monitor displays the default screen when the start switch is turned to the ON position. The default screen contains three gauges: fuel level, hydraulic oil temperature and engine coolant temperature. Use the following Illustration to operate the monitor.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...

24/10/2007

330D L Excavator B6H00001-UP (MACHINE) POWERED BY C9 Engine(SEBP4... Página 2 de 8

Illustration 1

g01197803

Monitor Panel (1) Up key (2) Right key (3) Home key (4) Main menu key (5) Left key (6) Down key (7) Cancel key or back key (8) OK key

Table 1 contains parameters for "TOOL#1" through "TOOL#5". Table 2 contains parameters for "TOOL#6" through "TOOL#10". Table 1 DISPLAY

"TOOL #1"

"TOOL #2"

"TOOL #3"

"TOOL #4"

"TOOL #5"

"TOOL PROGRAM: GENERAL" "NAME"

H115

H120C

H130

0

0

"MAX DIAL"

10

10

10

10

10

"MIN DIAL"

1

1

1

1

1

"UNDERSPEED

ENABLED

ENABLED

ENABLED

ENABLED

ENABLED

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...

24/10/2007

330D L Excavator B6H00001-UP (MACHINE) POWERED BY C9 Engine(SEBP4... Página 5 de 8

attachment valve "A1 OPEN TIME"

Open time of the number 1 attachment valve "A1 CLOSE TIME" Close time of the number 1 attachment valve

0.2

0.2

0.2

0.2

0.2

0.2

0.2

0.2

0.2

0.2

"TOOL PROGRAM -> ATTACHMENT #2 VALVE" "A2 EXTND MAX PRES" Maximum pressure for the extension of the number 2 attachment valve

4000

4000

4000

4000

4000

0.2

0.2

0.2

0.2

0.2

0.2

0.2

0.2

0.2

0.2

"A2 OPEN TIME"

Open time of the number 2 attachment valve "A2 CLOSE TIME" Close time of the number 2 attachment valve

To access the tool parameters, enter the service mode on the monitor. 1. From the default screen, press the main menu key (4) . 2. From the "MAIN MENU" screen, use the right key (2) to scroll through the menu options. 3. When the "SERVICE" option is highlighted, press the OK key (8) . 4. When "PASSWORD" screen appears, use the right key (2) and the left key (5) in order to scroll through the characters. When the desired character is highlighted, press the OK key (8). Enter the password for service FFF2 in order to continue to the "SERVICE" screen. 5. After the password has been entered the "SERVICE" screen should appear. Refer to Illustration 2. Note: For more detailed steps with entering passwords or entering the service mode, refer to Troubleshooting Section, "Using Service Mode".

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...

24/10/2007

330D L Excavator B6H00001-UP (MACHINE) POWERED BY C9 Engine(SEBP4... Página 6 de 8

Illustration 2

g01215792

Illustration 2 is a typical example of the "SERVICE" screen.

The table shows some of the approved Caterpillar work tools that are used. The table lists some of the parameters that should be verified for successful operation of the work tool. Table 3 SYSTEM 3 Work Tools

Hammer H115 H120C H130

Direction of Flow

"SYSTEM 3 TOOL Number"

1 Way

"TOOL 3"

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis...

24/10/2007