Volute casing pumps ZLND 32 - 125 ... 300 - 500
TECHNICAL DATA Flow:
max. 1800 m³/h
Head:
max. 140 m
Speed:
max. 3600 rpm
Material:
cast iron (0B,0C,0E) and stainless steel (4B)
Temperature:
max. 170 ºC depending on the shaft sealing and material execution.
Casing Pressure:
material design 4B PN 16 1)
2)
0B, 0C, 0E PN 16 / 10 / 14 Shaft sealing: Flange connections:
mechanical seal or stuffing box material design 4B 0B, 0C, 0E
Direction of rotation:
DIN 2501 PN 16 3)
DIN 2501 PN 16 / 10
clockwise when looking at the pump from the drive end.
APPLICATION Volute casing pumps of the ZLN range (meeting DIN 24255 / EN 733 and ISO 9908) are used when clear or turbid liquids free from solid particles are to be pumped. Application areas for pumps in this range
Flanges: Material design 4B: Complies with DIN 2543 PN 16 3) Material design 0B, 0C, 0E: DIN 2533 PN 16 / 2532 PN 10 Flanges drilled according to ANSI 150 can be supplied.
include: Automobile, mechanical and general engineering industries Food and beverage industry Pharmaceutical industry Paint industry Plastic and rubber industry Iron and non-ferrous metal industry Paper and pulp industry Textile industry Building and construction industry Heating and air conditioning Drainage Water supply Irrigation A range of materials is available to meet the specific needs of customers. For applications not covered by this pump range we offer the ISOchem range. DESIGN Horizontal, single-stage volute casing pumps with connections and main dimensions to DIN 24255 / EN 733, plus 19 additional sizes. The design of the pump allows the complete drive unit to be withdrawn from the casing without disturbing the attached pipe work. If a spacer type coupling is used, it is also unnecessary to disconnect the motor. The range covers 50 sizes with only 5 different bearing brackets. CONSTRUCTION Casing pressure: Material 4B:
max 16 bar from - 40 °C to +120 °C max 14 bar from 120ºC up to +170 °C 1) 2) Material 0B, 0C, 0E: max 16/10 /14 bar from - 20 °C to +120 °C 1) 2) max 14/9 /8 bar from 120 ºC up to +170 °C
Max. casing pressure= inlet pressure + delivery head at zero flow Please note: The relevant technical regulations and safety rules must be observed. Flanges location: Axial suction flange, discharge flange radially upwards. 133.65501.67.01 E
Bearings: Bearing brackets 25, 35 and 45: Two ball bearings, lifetime greased (2Z), design code B, or oil lubrication, design code C. Bearing brackets 55 and 65: One double row angular contact bearing on pump side, plus one ball bearing on drive side, grease lubricated S or oil lubricated T. Oil lubrication configurations with CLO (Constant Level Oiler) can be supplied. Shaft sealing: Shaft sealing either by stuffing box or mechanical seal. Code 041: Self-sealed, uncooled packing rings Code 052: Uncooled packing rings, external sealing liquid Code AF3: Balanced mechanical seal, seal face materials SiC/Carbon, elastomer EPDM Code BJ3: Unbalanced bellows mechanical seal, seal face materials SiC/Carbon, elastomer EPDM Code C23: Unbalanced bellows mechanical seal, seal face materials SiC/Carbon, elastomer EPDM Code AFS: Balanced mechanical seal, seal face materials SiC/ SiC, elastomer FPM (Viton) Code BJS: Unbalanced bellows mechanical seal, seal face materials SiC/ SiC, elastomer FPM (Viton) Code C2S: Unbalanced bellows mechanical seal, seal face materials SiC/ SiC, elastomer FPM (Viton) Code AFK: Balanced mechanical seal, seal face materials SiC/carbon, elastomer FPM (Viton) double PTFE (Teflon) wrapped Code BJJ: Unbalanced bellows mechanical seal, seal face materials SiC/Carbon, elastomer FPM (Viton) Code C2J: Unbalanced bellows mechanical seal, seal face materials SiC/Carbon, elastomer FPM (Viton) Codes AX3, AXS, AXK: are equivalent to AF3, AFS, AFK plus quench Codes AY3, AYS, AYK: are equivalent to AF3, AFS, AFK plus heating Code A93, A9S, A9K: are equivalent to AF3, AFS, AFK plus external flushing As an option, Code 051 (as 052, but with inlet and outlet) and other sealing execution can be supplied on request. 1)
From 80-400 to 300-500 except 150-500 150-500 3) 150-200, 150-250 and 200-250 2)
PUMP TECHNOLOGY ZLND 09/2001
Material design: Item
Component Mat. Nº
Material ISO EN denomination
DIN denomination
US Material ASTM Standard A 278 Cl. 30 A 351 CF8M
0B AISI
10.20
Volute casing
EN-JL 1040 1.4408
GG-25 GX6CrNiMo18 10
EN-GJL 250 GX5CrNiMo19-11-2
16.10
Casing cover
EN-JL 1040 1.4408 1.0503 1.4021 1.4401 EN-JL 1040 2.1050 1.4408
GG-25 GX6CrNiMo18 10 C 45 X 20 Cr13 X5CrNiMo17 12 2 GG-25 G-CuSn10 GX6CrNiMo18 10
EN-GJL 250 GX5CrNiMo19-11-2 C 45 X 20 Cr13 X5CrNiMo17 12 2 EN-GJL 250 GX5CrNiMo19-11-2
A 278 Cl. 30 A 351 CF8M A 576 Gr1045 A 276 Type 420 A 167 Gr316 A 278 Cl. 30 B 427 C91600 A 351 CF8M
EN-JL 1040 1.4021
GG-25 X 20 Cr13
EN-GJL 250 X 20 Cr13
A 278 Cl. 30 A 276 Type 420
420
1.4021 1.4401
X 20 Cr13 X5CrNiMo17 12 2
X 20 Cr13 X5CrNiMo17 12 2 Soft packing
A 276 Type 420 A 167 Gr316
420 316
21.00
Shaft
23.00
Impeller
33.00 52.30 52.40 46.10 43.30
Bearing bracket Shaft sleeve / Mechanical seal Shaft sleeve / Stuffing box Shaft seal / Stuffing box Mechanical seal
Construction 0C 0E 4B
316 316 1045 420 316
x
x
x
x
x
x
x(*) x
x(*) x
x(*) x
x x x
x
x
316
Silicon Carbide / Carbon EPDM or Viton ( See other options )
x
x x
x x
x x
x x
x
x
x
x
x
x
x x
x
x
x
x
(*) Only in bearing brackets 55 and 65. Casing gasket: The casing is sealed by means of a confined flat gasket of EWP 210 material. Code of this design: 2 The casing is sealed by means of a confined flat gasket of PTFE. Code of this design: 4 Motor Power: Using commercial electric motors, type of construction IM B3. To determine the drive power we recommend the following safety margin: Up to 4 kW: 25% The following speeds must not be exceeded: Size 32125 32160 32200 40125 40160 40200 50125 50160 50200 65125 1) 65160 65200 1) 80160 80200 100160 100200
max. speed rpm
3600
Size
4 to 7,5 kW: 20%
max. speed
3)
3000
max. speed
Size
rpm
32250 40250 50250 65250 80250 2) 100250 2) 125200
above 7,5 kW: 15%
Size
rpm
max. speed rpm
3)
40315 50315 65315 80315 80400 100315 100400 125250 125315 125400 4) 150200 150250 150315 150400 200250
1800
150500 200315 200400 200500 250300 250315 250400 250500 300400 300500
1)
In material design 4B max. speed 3000 rpm
2)
In material design 4B max. speed 1800 rpm
3)
In material design 0E, and 4B max. speed 3000 rpm
4)
In material design 4B max. speed 1500 rpm
1500
The max. speeds are derived from the permissible shaft loads and the permissible peripheral speeds of the impellers Bearing bracket / pump size: Bracket 25
32125 32160 32200 32250 40125 40160 40200 40250 50125 50160 50200 50250 65125 65160 65200 80160
Bracket 35
40315 50315 65250 65315 80200 80250 80315 100160 100200 100250 100315 125200 125250 150200 150250
Bracket 45
80400 100400 125315 125400 150315 150400 200250
Bracket 55
150500 200315 200400 200500 250300 250315
Bracket 65
250400 250500 300400 300500
General comments: For horizontal volute pumps in CLOSE COUPLED construction with STANDARD motor for nominal performances and flange connections as per EN 733 refer to our series ZLK. For INLINE pumps with the same drive unit, consisting of bearing bracket with bearing, stub shaft and mechanical seal, casing cover, impeller and impeller nut, refer to our series ZLI (supplied also with magnetic drive). For equipping hot media systems a complete programme is available for a flow range between 1-1000 m3/h consisting of the range: ZTN volute pumps to EN 733 design with base plate tmax 350 °C PN 16. Heat transfer oil. ZTK volute pumps to EN 733 close coupled design tmax 350 °C PN 16. Heat transfer oil. 0 ZTI volute pumps to EN 733 as INLINE construction (up to tmax 400 C with magnetic drive) PN 16. Heat transfer oil. ZEN volute pumps to EN 22858, tmax 230 °C PN 40. Hot water design. ZDN volute pumps to EN 22858, tmax 185 °C PN 25. Hot water design. ZHN volute pumps to EN 733, tmax 180 °C PN 16. Hot water design. ZLI volute pumps to EN 733 as INLINE construction, tmax 150 °C PN 25. Hot water design.
Designs are subject to amendment without prior notice.
SECTIONAL DRAWING AND NOMENCLATURE 10.20
23.00
43.30
16.10
32.10
33.00
21.00
Mechanical seal BJ3
Bearing brackets 25, 35 and 45
Stuffing Box 041
52.40 46.10
10.20 16.10 18.30 21.00
volute casing casing cover support foot shaft Shaft sea Code BJ3/BJS/BJJ
23.00 32.10 33.00
impeller ball bearing bearing bracket
Shaft seal Code AF3/AFS/AFK
43.30 Mechanical seal with quench cover double lip seal ring Code AX3/AXS/AXK
Mechanical seal with heating cover Code AY3/AYS/AYK
mechanical seal stuffing box shaft sleeve (stuffing box)
Shaft seal Code C23/C2S/C2J
43.30
Mechanical seal with external flushing Code A93/A9S/A9K
43.30 Shaft seal Code 052
46.10
43.30 46.10 52.40
43.30
43.30 Shaft seal Code 041
18.30
43.30 Shaft seal Code 051 (optional)
46.10
Designs are subject to amendment without prior notice.
46.10
SECTIONAL DRAWING AND NOMENCLATURE
10.20
23.00
16.10 46.10 52.40
32.11 33.00
32.10 21.10
Stuffing Box 041
Bearing brackets 55 and 65.
Mechanical seal BJ3
52.30 10.20 16.10 18.30 21.00
volute casing casing cover support foot shaft Shaft Seal Code BJ3/BJS/BJJ
18.30
43.00 23.00 32.10 32.11 33.00
impeller ball bearing ball bearing bearing bracket Shaft Seal Code AF3/AFS/AFK
43.30
43.30 46.10 52.30 52.40
mechanical seal stuffing box shaft sleeve (mechanical seal) shaft sleeve (stuffing box) Shaft Seal Code C23/C2S/C2J
43.30
Shaft Seal Code 051 (optional)
Shaft Seal Code 052
Shaft Seal Code 041
46.10
43.30
46.10
Designs are subject to amendment without prior notice.
46.10
Performance Graph
n = 1450 rpm 10
20
10
100
40
20
40
60 60
80
80
100
200
100
400
200
400
600 800 1000 600 800 1000
1500 2000
1500 2000
3000
Imp.gal./min
3000 4000
US gal./min 300
80 150-500
H [m]
200-500
250300-500 500
250
60
200
50 100-400
80-400
40 30 40-315 20
40250
32-250
32200B
32-200A
65315
50-315
65-250
50-250
40200
50200
65200
80315
80250 80200
32160B
150400
250400
125315
150315
100250
125250
150-250
200315
250315
100 300400
80
150200
250300 40
200250
30
65- 80160 160
50-160
20
100160
5 32-125
4
40-125
50-125
H [ft]
60
125200
40160
150
200400
100315
100200
10 32-160A
125400
65-125
3
10
2 2
3
4
5
10
20
30
40
50
100
200
300
400
500
1000
2000
Q [m³/h]
n = 2900 rpm
H [m]
H [ft]
Q [m³/h]
Designs are subject to amendment without prior notice.
Performance Graph
n = 1750 rpm
H [m]
H [ft]
Q [m³/h]
n = 3500 rpm
H [m]
H [ft]
Q [m³/h]
Designs are subject to amendment without prior notice.
Table of Dimensions a d
x
f
l
2 D øk DN 2
d
2
h d
1 k6
2
t u
h DN 1 øk D
1
c m
s
2
m 1
w
b
s 1
2
110 n 2 n 1
All dimensions in mm Size 32125 32160 32200 1) 32250 40125 40160 40200 40250 1) 40315 50125 50160 50200 50250 1) 50315 65125 65160 65200 65250 65315 80160 80200 80250 80315 1) 80400 1) 100160 100200 100250 100315 100400 1) 125200 125250 125315 125400 1) 150200 1) 150250 150315 150400 1) 200250
BB 25 25 25 25 25 25 25 25 35 25 25 25 25 35 25 25 25 35 35 25 35 35 35 45 35 35 35 35 45 35 35 45 45 35 35 45 45 45
DN2 32 32 32 32 40 40 40 40 40 50 50 50 50 50 65 65 65 65 65 80 80 80 80 80 100 100 100 100 100 125 125 125 125 150 150 150 150 200
Pump dimensions DN1 a f h1 50 80 360 112 50 80 360 132 50 80 360 160 50 100 360 180 65 80 360 112 65 80 360 132 65 100 360 160 65 100 360 180 65 125 470 225 65 100 360 132 65 100 360 160 65 100 360 160 65 100 360 180 65 125 470 225 80 100 360 160 80 100 360 160 80 100 360 180 80 100 470 200 80 125 470 225 100 125 360 180 100 125 470 180 100 125 470 200 100 125 470 250 125 125 530 280 125 125 470 200 125 125 470 200 125 140 470 225 125 140 470 250 125 140 530 280 150 140 470 250 150 140 470 250 150 140 530 280 150 140 530 315 200 160 470 280 200 160 470 280 200 160 530 280 200 160 530 315 200 160 590 280
h2 140 160 180 225 140 160 180 225 250 160 180 200 225 280 180 200 225 250 280 225 250 280 315 355 280 280 280 315 355 315 355 355 400 400 400 400 450 400
b 50 50 50 65 50 50 50 65 65 50 50 50 65 65 65 65 65 80 80 65 65 80 80 80 80 80 80 80 100 80 80 100 100 100 100 100 100 100
c 15 15 15 15 15 15 15 15 18 15 15 15 15 17 15 15 15 15 18 15 15 18 18 18 18 18 18 18 18 18 18 18 18 20 20 18 18 22
m1 100 100 100 125 100 100 100 125 125 100 100 100 125 125 125 125 125 160 160 125 125 160 160 160 160 160 160 160 200 160 160 200 200 200 200 200 200 200
Foot dimensions m2 n1 n2 70 190 140 70 240 190 70 240 190 95 320 250 70 210 160 70 240 190 70 265 212 95 320 250 95 345 280 70 240 190 70 265 212 70 265 212 95 320 250 95 345 280 95 280 212 95 280 212 95 320 250 120 360 280 120 400 315 95 320 250 95 345 280 120 400 315 120 400 315 120 435 355 120 360 280 120 360 280 120 400 315 120 400 315 150 500 400 120 400 315 120 400 315 150 500 400 150 500 400 150 550 450 150 500 400 150 550 450 150 550 450 150 500 400
s1* M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M16 M16 M12 M12 M16 M16 M16 M16 M16 M16 M16 M20 M16 M16 M20 M20 M20 M20 M20 M20 M20
s2* M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12 M12
w 260 260 260 260 260 260 260 260 340 260 260 260 260 340 260 260 260 340 340 260 340 340 340 370 340 340 340 340 370 340 340 370 370 340 340 370 370 430
1)
x 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 180
d1 24 24 24 24 24 24 24 24 32 24 24 24 24 32 24 24 24 32 32 24 32 32 32 42 32 32 32 32 42 32 32 42 42 32 32 42 42 42
Shaft end l 50 50 50 50 50 50 50 50 80 50 50 50 50 80 50 50 50 80 80 50 80 80 80 110 80 80 80 80 110 80 80 110 110 80 80 110 110 110
Transnorm pump sizes, not included in DIN 24255 / EN 733. Flanges drilled according to ANSI 150 on request. * Slots suitable for bolts with dimensions indicated. Bolts are not included in the bare shaft pump standard scope of supply.
Designs are subject to amendment without prior notice.
t 27 27 27 27 27 27 27 27 35 27 27 27 27 35 27 27 27 35 35 27 35 35 35 45 35 35 35 35 45 35 35 45 45 35 35 45 45 45
u 8 8 8 8 8 8 8 8 10 8 8 8 8 10 8 8 8 10 10 8 10 10 10 12 10 10 10 10 12 10 10 12 12 10 10 12 12 12
Table of Dimensions a
f
x l
d2
DN2 øk D
h2
d2 t
d 1k6
u
h1
DN1 øk D
c m 2
s
b
s
2
1
140 n 2
w m 1
n
1
All dimensions in mm Size
BB 1)
150500 1) 200315 1) 200400 1) 200500 1) 250300 1) 250315 1) 250400 1) 250500 1) 300400 1) 300500
DN2 150 200 200 200 250 250 250 250 300 300
55 55 55 55 55 55 65 65 65 65
Pump dimensions DN1 a f h1 200 180 670 400 250 200 670 355 250 180 670 355 250 200 670 425 300 305 655 425 300 250 670 375 300 250 720 400 300 250 720 450 350 300 720 425 350 300 720 480
h2 500 450 500 560 550 560 600 670 670 670
b 100 100 100 100 120 120 120 120 120 140
c 22 22 22 22 28 28 29 32 30 32
m1 200 200 200 200 240 240 240 240 250 250
Foot dimensions m2 n1 n2 150 640 540 150 550 450 150 550 450 150 660 560 190 700 600 190 620 520 190 700 600 190 750 650 190 760 660 190 840 720
s1* M20 M20 M20 M20 M20 M20 M20 M20 M24 M24
s2* M16 M16 M16 M16 M16 M16 M16 M16 M16 M16
w 489 489 489 489 474 489 508 503 508 508
x 180 180 180 180 180 180 180 180 180 180
d1 50 50 50 50 50 50 2) 60 2) 60 2) 60 2) 60
Shaft end l t 115 53.5 115 53.5 115 53.5 115 53.5 115 53.5 115 53.5 145 64 145 64 145 64 145 64
u 14 14 14 14 14 14 18 18 18 18
1)
Transnorm pump sizes, not included in DIN 24255 / EN 733. Flanges drilled according to ANSI 150 on request. For these sizes the clearance corresponds to M6. * Slots suitable for bolts with dimensions indicated. Bolts are not included in the bare shaft pump standard scope of supply. 2)
Flange connections to DIN 2501 PN 16 DN2/DN1
32
40
D 140 150 k 100 110 d2 x number 18x4 18x4
50
65
80
165 185 200 125 145 160 18x4 18x4 18x8
100
125
150
200
220 180 18x8
250 210 18x8
285 340 240 295 22x8 22x12
DIN 2501 PN 10 250
300
350
400
100
125
150
200
405 355 26x12
460 410 26x12
520 470 26x16
580 525 30x16
220 180 18x8
250 210 18x8
285 240 22x8
340 295 22x8
Designs are subject to amendment without prior notice.
Connections for bearing brackets 25, 35 and 45 1)
u m1
u k6 u k7
u m1
ufo
Only for Impellers ∅125
ufo u s ufo
u k4 u k5 u k8
us
um1
u k3 u k4 u k5 u k8
u k6 u k7
u k3 u k1 u k2 u eo ueo uio
uAL
ue
um2
u k1 u k2
um1 : Pressure gauge. Only available on request um2 : Pressure gauge. Only available on request ue : Drainage ueo : Oil drainage uio : Constant level oiler ufo : Oil filling uAL : Drainage for leakage. Threaded hole only available on request us : Sensor Size 1)
32125 32160 32200 32250 1) 40125 40160 40200 40250 40315 1) 50125 50160 50200 50250 50315 1) 65125 65160 65200 65250 65315 80160 80200 80250 80315 80400 100160 100200 100250 100315 100400 125200 125250 125315 125400 150200 150250 150315 150400 200250
um1
um2 ue
ueo
uio
ufo
uAL
us
u eo
u io
uk1 : Quench Inlet uk2 : Heating Inlet uk3 : 051 Inlet (Stuffing box) uk4 : 052 External sealing (Stuffing box) uk5 : External Flushing uk6 : Quench Outlet uk7 : Heating Outlet uk8 : 051 Outlet (Stuffing box)
uk1
uk2 uk3
uk4
uk5
G1/4
G1/8
G1/4
G3/8
G1/4
∅15.65
∅13
M8 G1/4 G1/8 G1/4 G1/8 G1/4 G1/8 G1/4
Certain construction sizes do not correspond in all details to the drawing
Designs are subject to amendment without prior notice.
uk6 uk7
uk8
u io
Connections for bearing brackets 55 and 65. um1
ufo
um3
um1
ufo
uk4 uk8 uk9
View X
X
uk3
ue
uio umo ueo uAL
um2
ueo uAL
um1 : Self sealing connection um2 : Pressure/vacuum gauge. Only available on request ue : Drainage ueo : Oil drainage uio : Constant level oiler ufo : Oil filling uAL : Drainage for leakage
Size 150500 200315 200400 200500 250300 250315 250400 250500 300400 300500
um1
G1/4
um2
G1/2
ue
ueo
G1/2
G1/4
uio
G1/4
ufo
∅ 20
um3 : uk3 : uk4 : uk8 : umo : uk9 :
uAL
G1/2
um3
G1/2
uk3
G1/4
uio
umo
Pressure gauge connection 051 Inlet (Stuffing box) 052 External sealing (Stuffing box) 051 Outlet (Stuffing box) Oil level control 041 inlet (Stuffing box)
uk4
G1/4
uk8
G1/4
Designs are subject to amendment without prior notice.
umo
G3/4
uk9
G1/4
Foundation plan, bearing brackets 25, 35 and 45. w a DN 2
h
DN
1
h
4
3
minimum length of rag bolt f
e2 b2
1 e
v
1
w1
Dimensions in mm Tolerances for welded parts acc. to DIN 8570 B Size 32-125 32-160 32-200 32-250 40-125
40-160
40-200 40-250
40-315
50-125 50-160 50-200
50-250
50-315 65-125 65-160
Motor size 71 71 80 80 80 90S 80 90S 90L 100L 71 80 71 80 80 90S 80 80 90S 90L 90S 90L 100L 100L 100L 100L 112M 132S 71 80 80 80 80 90S 80 90S 90L 100L 90L 100L 100L 112M 112M 132S 132M 80 80 80 90L 100L
kW 0.25 0.37 0.55 0.55 0.75 1.10 0.75 1.10 1.50 2.20 0.37 0.55 0.37 0.55 0.75 1.10 0.55 0.75 1.10 1.50 1.10 1.50 2.20 3.00 2.20 3.00 4.00 5.50 0.37 0.55 0.75 0.55 0.75 1.10 0.75 1.10 1.50 2.20 1.50 2.20 3.00 4.00 4.00 5.50 7.50 0.55 0.75 0.75 1.50 2.20
Base plate
Cplg.
pump 31
No. S241
33 S301 B68
S383
34
46 B80
S241
28
30 S301
B68
36
46 S383 B80 73 S434
B95 30
B68
36
S301 40 S342
B80 B68 50 B80
S383 S434
B95
88 33
B68 S342 39 B80
n = 1450 rpm
Weight kg unit 50 65 67 68 70 73 103 106 109 119 60 62 62 64 66 69 75 77 80 83 106 109 119 121 147 150 155 171 62 64 66 75 77 80 81 84 87 97 114 123 125 131 171 186 198 80 82 88 95 104
Rag bolt DN2
DN1
a
b2
e1
e2
330
480
290
390
480
350
80 32
v
h3
h4
w*
177 197
317 357
60
225
405
75
260
485
177
317
197
357
683 683 717 717 717 775 737 795 795 836 683 717 683 717 717 775 737 737 795 795 795 795 836 836 971 971 992 1068 703 737 737 737 737 795 737 795 795 836 795 836 836 857 992 1068 1094 737 737 737 795 836
125
50
100
f1
490
600
330
440
160
290
80 125 390
40
480
350
60
65
225
405
260
485
100
490
600
440
160
75
125
305 540
660
490
555
170 197
357
405 100
390
480
350
125
60
225 425
50
65 450
125
540
400
140
490
600
440
160
540
660
490
170
240
440
260
485
75 305
585 420
65
80
100
450
540
400
140
60
240
Designs are subject to amendment without prior notice.
440
w1
730
M16x200
920
M20x400
M16x200 730
920
M20x400
1000
730 M16x200
820
920
M20x400
1000
820
M20x400
Size
65-200
65-250
65-315
80-160
80-200
80-250
80-315
80-400
100-160
100-200
100-250
100-315
100-400
125-200 125-250
125-315
125-400
150-200
150-250
Motor size 90S 90L 100L 100L 112M 100L 100L 112M 132S 132S 132M 160M 160L 80 90S 90L 100L 100L 90L 100L 100L 112M 132S 100L 112M 132S 132M 132S 132M 160M 160L 160M 160L 180M 180L 200L 100L 100L 112M 132S 100L 100L 112M 132S 132M 112M 132S 132M 160M 160M 160L 180M 180L 160L 180M 180L 200L 225S 225M 132M 160M 160L 132M 160M 160L 160L 180M 180L 200L 225S 200L 225S 225M 250M 280S
kW 1.10 1.50 2.20 3.00 4.00 2.20 3.00 4.00 5.50 5.50 7.50 11.00 15.00 0.75 1.10 1.50 2.20 3.00 1.50 2.20 3.00 4.00 5.50 3.00 4.00 5.50 7.50 5.50 7.50 11.00 15.00 11.00 15.00 18.50 22.00 30.00 2.20 3.00 4.00 5.50 2.20 3.00 4.00 5.50 7.50 4.00 5.50 7.50 11.00 11.00 15.00 18.50 22.00 15.00 18.50 22.00 30.00 37.00 45.00 7.50 11.00 15.00 7.50 11.00 15.00 15.00 18.50 22.00 30.00 37.00 30.00 37.00 45.00 55.00 75.00
132M 160M 160L 180M 160L 180M 180L 200L
7.50 11.00 15.00 18.50 15.00 18.50 22.00 30.00
Base plate
Cplg.
No.
Weight kg pump
B68 S383
45 B80
S434
70
B95 S605 S486
92 B110 B68 43
S383
B80 60
S434
B95 B80 75
S605
B95 95 B110 B95
S486
B110
143
B125 S434
B80
S605
B95
S434
78
B80 70 B95 B80
S605
85 B95
S486
B110
S606
B125 B95 B110
S607
B125 B140
S605
B95
104
177
100 S486 S605
B110 B95
S486
B110 B95 B110
102
S606
151 S607 S606
B125 B140 B125 B140
S607 180x73 x14 S605
188 B160 B180 B95 123
S606
B110
S607
B125 B140
128
unit 105 108 118 120 125 158 160 165 181 236 247 268 288 100 103 106 116 118 125 134 136 141 157 197 202 218 230 239 251 272 291 322 340 361 376 424 166 169 174 190 158 160 165 181 193 213 228 240 261 281 300 320 337 402 423 438 486 548 569 256 277 296 258 279 298 375 396 411 459 520 498 559 580 793 1047 295 316 335 355 340 360 389 436
Rag bolt DN2
DN1
a
b2 490
e1 600
e2 440
v 160
f1 75
h3 260
h4 485
100 65
80 540
660
490
170 90
125
730
740
670
190
610
840
550
205
280
530
300
550
325
605
485
490
600
440
160
75
260 510
80
100 540
660
490
170 300
125
730
740
670
190
90 350
80
125
580
665
610
840
550
205
380
735
540
660
490
170
280
560
730
740
670
190
300
580
540
660
490
170
280
560
125
300 90 100
125
140
730
740
670
190
610
840
550
205
730
670 940
730
740
110
325
605
350
665
380
735
230 670
190 665
610 730
840 740
550 670
205 190
90
350 705
610
550 840
125
150
140
205
730
380
735
110 940 840
670
940 1460
230 680
740
150
200
160
730
840
940
230 205
170
200
415
815
455
855
190
670
205
110
380
780
230
Designs are subject to amendment without prior notice.
w* 795 795 836 836 857 946 946 967 1043 1068 1094 1186 1248 762 820 820 861 861 930 971 971 992 1068 971 992 1068 1094 1068 1094 1186 1248 1247 1247 1371 1371 1429 971 971 992 1068 971 971 992 1068 1094 1007 1083 1109 1201 1201 1263 1325 1325 1262 1386 1386 1444 1481 1481 1109 1201 1263 1109 1201 1263 1262 1386 1386 1444 1481 1444 1481 1481 1604 1679 1129 1221 1283 1345 1283 1345 1345 1403
w1
920 M20x400 1000
1120 M24x400 1250
920
M20x400
1000
1120
M24x400 1250
1000
M20x400
1120
M24x400
1000
M20x400
1120
M24x400 1250
1400 1120 1250 1120
1250 M24x400 1400 1250 1400 1800
M16x200
1120
1250
1400
M24x400
Size
150-315
150-400
200-250
Motor size 180L 200L 225S 225M 250M 225M 250M 280S 280M 160L 180M 180L 200L
kW 22.00 30.00 37.00 45.00 55.00 45.00 55.00 75.00 90.00 15.00 18.50 22.00 30.00
Base plate
Cplg.
No. S606
Weight kg pump
B110 B125 B140
S607
180x73x14
B160 B140 B160 B180
S607
B95 B110 B125
170
205
230
unit 431 479 540 561 774 598 811 1065 1117 471 492 507 555
Rag bolt DN2
DN1
a
b2
e1
e2
v
f1
h3
h4
840
150
200
200
200
160
160
730
730
940
670
230
380
780
415
865
110
1460
680
170
200
455
905
940
670
230
185
380
780
* Motor protection type IP 55, dimensions depend on the motor manufacturer.
Dimension listed are taken from the SIEMENS catalogue.
Designs are subject to amendment without prior notice.
w*
w1
1406 1464 1501 1501 1624 1501 1624 1699 1699 1342 1466 1466 1524
1250
1400
M24x400
1800
M16x200
1400
M24x400
Foundation plan, bearing brackets 55 and 65. w a DN
2
h 4
DN
h
1
3
minimum length of rag bolt e
f1 v
v
2
b2
2 e w
1
1
Dimensions in mm Tolerances for welded parts acc. to DIN 8570 B Size
150-500
200-315
200-400
200-500
Motor size kW 180L 22 200L 30 225S 37 225M 45 250M 55 280S 75 280M 90 315S 110 315M 132 315L 160 315L 200 315 250 180L 22 200L 30 225S 37 225M 45 250M 55 280S 75 180L 22 200L 30 225S 37 225M 45 250M 55 280S 75 280M 90 315S 110 315M 132 315L 160 315L 200 315 250 225M 45 250M 55 280S 75 280M 90 315S 110 315M 132 315L 160 315L 200 315 250 315 315 355 355
Base plate
Cplg.
No. 167x81x12
pump
B125
174x82x14 178x82x14
B140
190x82x14
B160 B180
198x82x14
335
212x83x16 226x83x16
B200
238x87x16
B225 B125
169x72x12 176x73x14 180x73x14
B140
192x73x14
B160 B180 B125
200x74x14 167x72x12
310
174x73x14 178x73x14 190x73x14 198x74x14
B140 B160 B180 340
212x82x16 226x82x16
B200
238x87x16
B225 B140 B160 B180
180x84x14 192x84x14 200x84x14
395
214x85x16 228x85x16
B200
240x87x16
B225 B250
264x98x18
n = 1450 rpm
Weight kg unit 674 754 817 845 955 1136 1186 1397 1477 1635 1775 1605 659 712 777 805 915 1095 666 742 807 835 945 1125 1175 1400 1480 1635 1775 1610 915 1025 1205 1255 1465 1545 1700 1840 1665 1865 1965
Rag bolt DN2
DN1
a
b2
v
e1
e2
v2
f1
h3
h4
w*
w1
810
170 170 170 170 190 190 190 210 210 230 230 230 170 170 190 190 190 210 170 170 170 170 190 190 190 210 210 230 230 230 190 190 210 210 210 210 230 230 250 250 270
1330 1400 1440
760
665 700 720
235
550
1050
1670 1740 1780
240
570
1070
1566 1624 1661 1661 1784 1859 1859 1994 1994 2134 2134 2254 1586 1644 1681 1681 1804 1879 1566 1624 1661 1661 1784 1859 1859 1994 1994 2134 2134 2254 1681 1804 1879 1879 2014 2014 2154 2154 2274 2274 2499
820 150
200
180
830
870 720 200
730
740 720 730
740 180 200
250
820
870 840
200 850
870 980
1520 1600
770
760 800
1700
850
1800
900
1920 1350 1420 1420
810 670 680
960 675 710 710
245
590
1090
255
505
955
260 1540 1580 1330 1400 1440 1520 1600
690 670 680
690
1700
770 790 665 700 720
525
975
235
505
1005
240
525
1025
760 800 850
760 1800 1920 1420 1540 1580
900 810
960 710 770 790
245
260
545
595
1045
1155
790 1720
860
1820
910
1900
810
950
2100
920
1050
265
270
615
635
* Motor protection type IP 55, dimensions depend on the motor manufacturer.
Dimensions listed are taken from the SIEMENS catalogue.
Designs are subject to amendment without prior notice.
1175
1196
M16x200 1900 1980 2120 2260 2380 1690 1760 1800 1920 2000 1670 1740 1780
M18x200
M16x200
M16x200
1900 1980 2120 2260 2380 1800 1920 2000
M18x200
M16x200
2140 2280 M18x200 2400 2640
Size
Motor size
250-300
250-315
250-400
250-500
300-400
300-500
225S 225M 250M 280S 200L 225S 225M 250M 280S 280M 315S 315M 225S 225M 250M 280S 280M 315S 315M 315L 315L 315 315 355 280S 280M 315S 315M 315L 315L 315 315 355 355 225M 250M 280S 280M 315S 315M 315L 315L 315 315 355 355 225M 250M 280S 280M 315S 315M 315L 315L 315 315 355 355 355 400 400 400
Base plate
kW 37 45 55 75 30 37 45 55 75 90 110 132 37 45 55 75 90 110 132 160 200 250 315 355 75 90 110 132 160 200 250 315 355 400 45 55 75 90 110 132 160 200 250 315 355 400 45 55 75 90 110 132 160 200 250 315 355 400 500 560 630 710
Cplg.
No.
Weight kg pump
189x88x14
B140
201x88x14
B160 B180 B125 B140
416 209x88x14 181x80x14 185x80x14
205x80x14
B160 B180
219x82x16
B200
190x88x14
B140
202x88x14
B160 B180
197x80x14
210x88x14
424
464
224x89x16
B200 238x89x16 250x89x16
B225 B250
274x98x18 210x93x14
B180
224x94x16 238x94x16
B200
250x94x16
B225
274x98x18
B250
195x94x14
B140 B160 B180
207x94x14 215x94x14
589
229x95x16 243x95x16
B200 620
255x95x16
B225
279x98x18
B250
195x102x14
B140 B160 B180
207x102x14 215x102x14 229x103x16 243x103x16
B200
255x103x16
B225 B250
279x104x18
B280 299x106x18
A315
800
unit 894 922 1037 1217 842 902 930 1045 1225 1275 1485 1565 958 985 1095 1275 1325 1540 1620 1775 1915 1735 2135 2040 1407 1456 1671 1755 1910 2050 1860 2160 2165 2205 1150 1260 1442 1491 1701 1785 1945 2085 1892 2191 2196 2240 1270 1477 1655 1711 1925 2007 2170 2313 2725 2939 3372 3474 3689 4302 4524 4728
Rag bolt DN2
DN1
a 305
b2 880
800 250
820
250
300
880
250 890
980 930
250 940
980
940
300
950
980 300
350 1020
300
1030
1040
1060
v
e1
190 190 210 210 190 190 190 190 210 210 210 210 190 190 210 210 210 230 230 230 230 250 250 270 210 210 230 230 230 230 250 250 270 270 190 210 210 210 230 230 250 250 250 250 270 270 190 210 210 210 230 230 250 250 250 250 270 270 270 290 290 290
1510
e2
v2
830 1590 1670 1430 1470
h3
h4
365
595
1145
310
545
1105
795 835 715 735 750
1590 1630 1770
f1
755
795 815 760
885
1520
760
1600 1680
800 840
315
310
565
570
1125
1170
830 1780
890
1920
960
2000
1000
2200 1680
920
1780 1920
1100 840
315
320 310
880
2000 920
890
1930
960 640
1310
1100
320
660
1330
785 825 865
360
595
1265
915 965 365
2050 2250
1210 1290
1000
1570 1650 1730 1830
610 620
1190
890
315
2200
590
615
1285
1025 920
1570 1650 1730 1830
1125
370
635
1305
785 825 865
360
650
1320
915 970
1930
965
2050
1025
2250
980
365
1000
1340
1125 370
2410
670
1205
* Motor protection type IP 55, dimensions depend on the motor manufacturer. Dimensions listed are taken the SIEMENS catalogue.
Designs are subject to amendment without prior notice.
690
1360
w*
w1
1771 1771 1894 1969 1694 1731 1731 1854 1929 1929 2064 2064 1781 1781 1904 1979 1979 2114 2114 2254 2254 2374 2374 2599 1979 1979 2114 2114 2254 2254 2374 2374 2599 2599 1831 1954 2029 2029 2164 2164 2304 2304 2424 2424 2649 2649 1831 1954 2029 2029 2164 2164 2304 2304 2424 2424 2649 2649 2649 2849 2849 2849
1890 1890 2010 2090 1810 1850
M16x200
M16x200 1970 2050 2190
M18x200
1900 2020 2100
M16x200
2240 2380
M18x200
2500 2740 2100
M16x200
2240 2380
M18x200
2500 2740 1950 2070 2150
M16x200
2290 2430 M18x200 2550 2790 1950 2070 2150
M16x200
2290 2430 2550
2790
2990
M18x200
Foundation plan, bearing brackets 25,35 and 45 w a DN 2
h
DN
1
h
3
minimum length of rag bolt f
e2 b2
1 e
v
1
w1
Dimensions in mm Tolerances for welded parts acc. to DIN 8570 B Size
32-125
32-160
32-200
32-250
40-125
40-160
40-200
40-250
50-125
50-160
Motor size 71 80 80 90S 90L 90S 90L 100L 112M 90L 100L 112M 132S 132S 132S 160M 160M 80 90S 90L 100L 90S 90L 100L 112M 132S 100L 112M 132S 132S 160M 132S 160M 160M 160L 90S 90L 132S 90L 100L 112M 132S 132S 160M
kW 0.55 0.75 1.10 1.50 2.20 1.50 2.20 3.00 4.00 2.20 3.00 4.00 5.50 7.50 7.50 11.00 15.00 1.10 1.50 2.20 3.00 1.50 2.20 3.00 4.00 5.50 3.00 4.00 5.50 7.50 11.00 7.50 11.00 15.00 18.50 1.50 2.20 5.50 2.20 3.00 4.00 5.50 7.50 11.00
Base plate
Cplg.
No.
pump
S241
31 B68
S301 S272
B80
S301 S272
B68 B80
S303 B95
S241
B68
46
S272 S301
B80 B68
S272
B80
S303 S342
33
34
S383 S434
28
30
B95 B80
S303
36 B95
S383 46 S434 S301
B68
S303 S301 S342
B95 B68 B80
30
36 S303 B95 S383
n = 2900 rpm
Weight kg unit 51 52 54 57 74 72 80 89 96 81 90 97 128 138 151 171 184 64 67 71 80 69 77 79 93 115 92 99 122 133 162 151 171 184 224 69 77 116 83 92 99 122 133 162
Rag bolt DN2
DN1
a
b2 330
e1 480
390
32
50
e2 290
v
f1
125
h3 177
h4 317
350
360
540
320
140
390 360
480 540
350 320
125 140
60
197
357
80
225 390 600 100
80
160
490 540
660
440 490
330
480
290
360 390 360
405
350
540 480 540
320 350 320
170
75
260
485
177
317
125 140 125 140
197
357
240
420
225
405
60 40
65
390 450
600 540
390 100
350 400
160 140
350 600
490
160 440 75
50
65
540
660
490
170
390
480 600 480 540
350
125 160 125 140
100 450 390
400 350
600 490
240
420
260
485
197
357
225 240
405 420
225
405
60
160 440
240
420
* Motor protection type IP 55, dimensions depend on the motor manufacturer. Dimensions listed are taken the SIEMENS catalogue.
Designs are subject to amendment without prior notice.
w* 683 717 717 775 775 775 775 816 837 775 816 837 913 913 933 1051 1051 717 775 775 816 775 775 816 837 913 836 857 933 933 1051 933 1051 1051 1113 795 795 933 795 836 857 933 933 1050
w1
730
M16x200 820 730 820
920 1000
M20x400
730 820 730
M16x200
820 920 820
M20x400 M16x200
920
M20x400 1000
730 920 730 820
M16x200 M16x200 M20x400 M16x200
920 M20x400
4
Size
50-200
50-250
65-125
65-160
65-200
65-250
80-160
80-200
80-250
100-160
100-200
100-250
125-200
Motor size 100L 112M 132S 132S 160M 160M 160M 160L 180M 200L 100L 112M 132S 132S 132S 132S 160M 160M 160M 160M 160L 180M 200L 160L 180M 200L 200L 225M 132S 160M 160M 160L 180M 160M 160L 180M 200L 200L 180M 200L 200L 225M 250M 160L 180M 200L 200L 160L 180M 200L 200L 225M 200L 200L 225M 250M 280S 280M 250M 280S 280M
kW 3.00 4.00 5.50 7.50 11.00 15.00 15.00 18.50 22.00 30.00 3.00 4.00 5.50 7.50 5.50 7.50 11.00 15.00 11.00 15.00 18.50 22.00 30.00 18.50 22.00 30.00 37.00 45.00 7.50 11.00 15.00 18.50 22.00 15.00 18.50 22.00 30.00 37.00 22.00 30.00 37.00 45.00 55.00 18.50 22.00 30.00 37.00 18.50 22.00 30.00 37.00 45.00 30.00 37.00 45.00 55.00 75.00 90.00 55.00 75.00 90.00
Base plate No. S342
Cplg.
pump
B80
S303 S383
Weight kg
40 B95
S434 50 S605 S342
B110 B125 B80 33
S383 39 B95 S434 45 S605 S435
B110 B125 B95
S486
B125
70
S607 S383 B95 S434
S605
43 B110 B95 B110 B125
S486
60
B110 B125
75
S607 S435 S486 S435
B140 B95 B110 B125 B95 B110
S486 S607 S486
78
70 B125
S607
85
S609A
B140 B160
S607 S609A
B140 B160
100
unit 96 103 126 136 167 180 188 228 243 303 98 104 119 130 125 136 165 179 170 183 222 238 298 254 290 397 332 357 148 167 181 220 235 226 244 259 314 338 293 348 372 402 651 263 278 341 365 254 269 332 357 397 358 382 413 661 827 869 677 842 884
Rag bolt DN2
DN1
a
b2
e1
e2
v
450
540
400
140
390
600
350
160
f1
h3
h4
w*
w1
240
440
820
225
425
836 857 933 933 1051 1051 1051 1113 1175 1233 836 857 933 933 933 933 1051 1051 1051 1051 1113 1175 1233 1223 1285 1343 1343 1373 958 1076 1076 1138 1200 1186 1248 1310 1368 1368 1310 1368 1368 1398 1528 1248 1310 1368 1368 1248 1310 1368 1368 1398 1383 1383 1413 1543 1643 1643 1543 1643 1643
60 50
65
100
490
600
440
160
240
440
540
660
490
170
260
485
730
740
670
190
280 300
505 525
450
540
400
140
75
420 490
600
440
160
60 240 440
65
80
100 540
660
490
170 260
485
280 300 280
505 525 530
300
550
75 730
670
190
490
200
740 540 610
840
550
205
90
730 490
940 600
670 440
230 160
325
575
540
660
490
170
260
485
730
740
670
190
505 80
100
75
280
125
530 550 610
840
550
205
300 580 90
125 100
125
140
125
150
140
730
940
670
230
605 630
200
325 350 280
540
740
490
610
840
550
205
300
580
540
740
490
200
280
560
610
840
550
205
300
580
730 610
940 840
670 550
230 205
325
605
730
940
670
230 350 380
630 660
350 380
665 695
744
1200
696
300
730 744
940 1200
670 696
230 300
90
90
* Motor protection type IP 55, dimensions depend on the motor manufacturer.
Dimensions listed are taken from the SIEMENS catalogue.
Designs are subject to amendment without prior notice.
M20x400 M16x200
920 M20x400 1000 1120
M24x400
820
920
M20x400 1000
1120
M24x400
1140
M20x400
1250
M24x400
1400 920 M20x400 1000
1120
M24x400 1250
1400 1140
M20x400
1250
M24x400
1140
M20x400
1250 1400 1250
M24x400
1400 1800 1400 1800
M24x400
Foundation plan for units with spacer type coupling, bearing brackets 25,35 and 45. w a DN
2 x
h DN
h
1
4
3
minimum length of rag bolt f
e
1 e
v
2
b2
1
w1
Dimensions in mm Tolerances for welded parts acc. to DIN 8570B Size 32-125 32-160 32-200
32-250
40-125
40-160
40-200
40-250
40-315
50-125
50-160
50-200
50-250
50-315 65-125
65-160
Motor size 71 71 80 80 80 90S 80 90S 90L 100L 71 80 71 80 80 90S 80 80 90S 90L 90S 90L 100L 100L 100L 100L 112M 132S 71 80 80 80 80 90S 80 90S 90L 100L 90L 100L 100L 112M 112M 132S 132M 80 80 80 90L 100L
kW 0.37 0.37 0.55 0.55 0.75 1.10 0.75 1.10 1.50 2.20 0.37 0.55 0.37 0.55 0.75 1.10 0.55 0.75 1.10 1.50 1.10 1.50 2.20 3.00 2.20 3.00 4.00 5.50 0.37 0.55 0.75 0.55 0.75 1.10 0.75 1.10 1.50 2.20 1.50 2.20 3.00 4.00 4.00 5.50 7.50 0.55 0.75 0.75 1.50 2.20
Base plate
Cplg.
No.
pump
31 S272
33 H80
34
S015 S383
46
28 S272 30 S015 S342 H80 S303
36
S383
46
S605
73 H95
S272
30
S342 36 S303 S342
H80 40
S303
S383
50
H95 S605
88 H80 33
S342 H80 S383
n = 1450 rpm
Weight kg
39
unit 69 71 73 74 76 79 105 108 112 120 66 68 68 70 72 75 85 86 89 93 108 112 120 123 163 165 170 186 68 70 72 77 79 82 91 94 97 106 116 125 127 132 186 201 226 83 84 90 97 115
Rag bolt DN2
DN1
a
80 32
b2 360
e1 540
e2 320
v
f1
h3
h4
177 197
317 357
225
405
210
390
260
485
177
317
197
357
182 240
342 420
225
405
260
485
325
575
197
357
140
50 60 361 100
490
360
325 600
540
440
320
160
75
40
600 540
325 400
100
140
80 361 450
x
160 140
60
65 390
350
100
100 600 490
160 440 75
125
730
740
360
670
320 540
450
100 50
390 450
190
140 400
600 540
350 400
160 140
60
240
420
225 240
405 440
225
425
65
100 390
350 600
490
160 440
260
485
325
605
75 125
730
740
670
190
450
540
400
140
420 65
80
100
60 490
600
440
160
240
100 440
Designs are subject to amendment without prior notice.
w* 823 823 857 857 857 915 877 935 935 976 823 857 823 857 857 915 877 877 935 935 935 935 976 976 1111 1111 1132 1208 843 877 877 877 877 935 877 935 935 976 935 976 976 997 1132 1208 1234 877 877 877 935 976
w1 820
M16x200
M12x100 920
M20x400
820 M20x200 920 820
M12x100 M20x200 M16x200
920 M20x400
1120
M24x400
M16x200 820 M20x400 920 820
M16x200 M20x400 M16x200
920 M20x400
1120
M24x400
820 M20x400 920
Size
65-200
65-250
65-315
80-160
80-200
80-250
80-315
80-400
100-160
100-200
100-250
100-315
100-400
125-200
125-250
125-315
125-400
150-200
150-250
Motor size 90S 90L 100L 100L 112M 100L 100L 112M 132S 132S 132M 160M 160L 80 90S 90L 100L 100L 90L 100L 100L 112M 132S 100L 112M 132S 132M 132S 132M 160M 160L 160M 160L 180M 180L 200L 100L 100L 112M 132S 100L 100L 112M 132S 132M 112M 132S 132M 160M 160M 160L 180M 180L 160L 180M 180L 200L 225S 225M 132M 160M 160L 132M 160M 160L 160L 180M 180L 200L 225S 200L 225S 225M 250M 280S 132M 160M 160L 180M 160L 180M 180L 200L
kW 1.10 1.50 2.20 3.00 4.00 2.20 3.00 4.00 5.50 5.50 7.50 11.00 15.00 0.75 1.10 1.50 2.20 3.00 1.50 2.20 3.00 4.00 5.50 3.00 4.00 5.50 7.50 5.50 7.50 11.00 15.00 11.00 15.00 18.50 22.00 30.00 2.20 3.00 4.00 5.50 2.20 3.00 4.00 5.50 7.50 4.00 5.50 7.50 11.00 11.00 15.00 18.50 22.00 15.00 18.50 22.00 30.00 37.00 45.00 7.50 11.00 15.00 7.50 11.00 15.00 15.00 18.50 22.00 30.00 37.00 30.00 37.00 45.00 55.00 75.00 7.50 11.00 15.00 18.50 15.00 18.50 22.00 30.00
Base plate
Cplg.
No.
Weight kg pump
S383
45 H80
S605
70
S435 H95 S486 S607
92 H110
S383
43 H80
S434 60 S605 H95 H80 75
S486
H95 95
S607 S486
H110 H95
S607
H110
143
H125 S605
H80
S435
H95
S605
78
H80 70
S435 S486 S605
H95
S486
H95
H80 85
H110
S607
104
H125 H95 H110 177
S608
H125 H140
S486
H95 100
S607 S486
H110 H95
S607
H110 H95 H110
102
151 S608 S607
H125 H140 H125 H140
S608
188 H160
180x73x14
S606
H180 H95 123 H110
S607 128 H125 H140
unit 107 111 119 121 127 159 161 167 196 237 249 270 290 102 105 108 117 119 126 149 151 156 172 198 203 219 231 240 252 273 293 324 381 403 418 467 168 170 175 204 159 161 167 196 207 214 230 241 262 282 302 322 339 417 439 454 502 553 574 257 278 298 259 280 300 390 412 426 475 526 514 564 585 817 1054 296 329 348 368 354 374 391 454
Rag bolt DN2
DN1
a
b2
e1
e2
v
490
600
440
160
730
740
670
190
490
200
f1 75
h3
h4
260
485
300
550
280
530
325
605
x
100 65
80
540 125
80
610
840
550
205
730
940
670
230
490
600
440
160
540
660
490
170
730
740
670
190
90
260
280
300
610
840
550
205
485
75
100
125
140
580
140
665
730 80
125
940
730 540 125
100
670
230
380
735
670
190
300
580
490
200
280
560
670
190
300
580
280 300
560 580
325
605
740 730 540 610 730
840 740
490 550 670
200 205 190
610
840
550
205
90
125
140 140 350
940 730
230
1060 610
665
670 110
840
380
735
270 550
205 665
730 610
940 840
670 550
230 205
90
350 705
125
150
140
730
940
670
230
1060 940
270 230
1060
270
110
380
415
150
200
160
730
735
140
815
1460 840
680
170 205
200
455
855
940
670
230
110
380
780
Designs are subject to amendment without prior notice.
w1 920
M20x400
1120
M24x400
1140
M20x400
1250
M24x400
1400
920
M20x400
1000
530
90 350
w* 935 935 976 976 997 1086 1086 1007 1183 1208 1234 1326 1388 902 960 960 1001 1001 1070 1111
140
1132 1208 1111 1132 1208 1234 1208 1234 1326 1388 1383 1383 1507 1507 1565 1111 1111 1132 1208 1111 1111 1132 1208 1234 1147 1223 1249 1341 1341 1403 1465 1465 1398 1522 1522 1580 1617 1617 1249 1341 1403 1249 1341 1403 1398 1522 1522 1580 1617 1580 1617 1617 1740 1815 1269 1361 1423 1485 1423 1485 1485 1543
1120
M24x400 1250
1400 1250 1400
1120
M24x400
1140
M20x400
1120
M24x400
1140 1250 1120
M20x400
1250 M24x400 1400
1400 1600 1250 1400 1250
1400
M24x400
1600 1400 1600 1800 1250
M16x200
M24x400 1400
Size
150-315
150-400
200-250
Motor size 180L 200L 225S 225M 250M 225M 250M 280S
kW 22.00 30.00 37.00 45.00 55.00 45.00 55.00 75.00
280M 160L 180M 180L 200L
90.00 15.00 18.50 22.00 30.00
Base plate
Cplg.
No. S607
Weight kg pump
H110 H125 H140
170
S608
S608 180x73x x14
S608
H160 H140 H160 H180
H110 H125
205
230
unit 446 495 546 567 798 603 835 1072 1125 492 512 527 576
Rag bolt DN2
DN1
a
b2
e1
e2
940 160 150
730
200
v
f1
h3
h4
x
230 670
1060
110
380
780
415
865
455
905
270 140
160
200
200
160
730
730
1060 1460
1060
680
670
270 170
270
200
185
380
780
* Motor protection type IP 55, dimensions depend on the motor manufacturer.
Dimensions listed are taken from the SIEMENS catalogue.
Designs are subject to amendment without prior notice.
180
w*
w1
1542 1600 1637 1637 1760 1637 1760 1835
1400
1835 1518 1642 1642 1700
M24x400 1600
1800
M16x200
1600
M24x400
Foundation plan for units with spacer type coupling, bearing brackets 55 and 65.
Dimensions in mm Tolerances for welded parts acc. to DIN 8570 B Size
150-500
200-315
200-400
200-500
Motor size
kW
180L 200L 225S 225M 250M 280S 280M 315S 315M 315L 315L 315 180L 200L 225S 225M 250M 280S 180L 200L 225S 225M 250M 280S 280M 315S 315M 315L 315L 315 225M 250M 280S 280M 315S 315M 315L 315L 315 315 355
22.0 30.0 37.0 45.0 55.0 75.0 90.0 110 132 160 200 250 22.0 30.0 37.0 45.0 55.0 75.0 22.0 30.0 37.0 45.0 55.0 75.0 90.0 110 132 160 200 250 45.0 55.0 75.0 90.0 110 132 160 200 250 315 355
Base plate
Cplg.
No. 185x81x12
pump
H125
192x82x14 196x82x14
H140
208x82x14
H160 H180
215x82x14
335
230x83x16 244x83x16
H200
256x87x16
H225 H125
187x72x12 194x73x14 198x73x14
H140
210x73x14
H160 H180 H125
217x74x14 185x72x12
310
192x73x14 196x73x14 208x73x14 215x74x14
H140 H160 H180
340
230x82x16 244x82x16
H200
256x87x16
H225 H140 H160 H180
198x84x14 210x84x14 217x84x14 232x85x16
395 246x85x16 258x87x16 281x98x18
H200 H225 H250
n = 1450 rpm
Weight kg unit 677 757 820 850 961 1143 1193 1406 1486 1644 1784 1625 662 715 780 810 921 1102 669 745 810 840 951 1132 1182 1409 1489 1644 1784 1630 920 1031 1212 1262 1474 1554 1709 1849 1685 1885 1985
DN2
DN1
a
b2
v
e1
e2
v2
f1
h3
h4
810
190 190 190 190 210 210 210 230 230 250 250 250 190 190 190 190 210 210 190 190 190 190 210 210 210 230 230 250 250 250 190 210 210 210 230 230 250 250 250 250 290
1470 1540 1580
760
735 770 790
235
550
1050
240
570
1070
820 150
200 180
830 870 720 200
730
740 720 730
200
250
180
740
820 870 840
200
850
870 980
1660 1730
770
x
830 865 180
1840
920
1940
970
2060 1490 1560 1600
810 670 680
1030 745 780 800
245
590
1090
255
505
955
260 1680 1750 1470 1540 1580 1660 1730
690 670 680
690
1840
840 875 735 770 790
525
975
235
505
1005
240
525
1025
830 865
180
180
920 760
1940 2060 1600 1680 1750
970 810
1030 800 840 875
245
260
545
595
1045
1155
790 1860
930
1960
980
180 265 615
2080
810
1040
2230
920
1115
270
635
* Motor protection type IP 55, dimensions depend on the motor manufacturer.
Dimensions listed are taken from the SIEMENS catalogue.
Designs are subject to amendment without prior notice.
1175
1195
w*
w1
1742 1800 1837 1837 1960 2035 2035 2170 2170 2310 2310 2430 1762 1820 1857 1857 1980 2055 1742 1800 1837 1837 1960 2035 2035 2170 2170 2310 2310 2430 1857 1980 2055 2055 2190 2190 2330 2330 2450 2450 2675
1850 1920 1960 2080 2150
Rag bolt
M16 x200
2300 2440
M18 x200
2560 1870 1940 1980
M18 x200
2100 2170 1850 1920 1960
M16 x200
2080 2150 2300 2440 2560 1980 2100 2170
M18 x200
M16 x200
2320 2460 2580 2810
M18 x200
Size
Motor size
250-300
250-315
250-400
250-500
300-400
300-500
225S 225M 250M 280S 200L 225S 225M 250M 280S 280M 315S 315M 225S 225M 250M 280S 280M 315S 315M 315L 315L 315 315 355 280S 280M 315S 315M 315L 315L 315 315 355 355 225M 250M 280S 280M 315S 315M 315L 315L 315 315 355 355 225M 250M 280S 280M 315S 315M 315L 315L 315 315 355 355 355 400 400 400
kW 37 45 55 75 30 37 45 55 75 90 110 132 37 45 55 75 90 110 132 160 200 250 315 355 75 90 110 132 160 200 250 315 355 400 45 55 75 90 110 132 160 200 250 315 355 400 45 55 75 90 110 132 160 200 250 315 355 400 500 560 630 710
Base plate
Cplg.
No.
Weight kg pump
207x88x14
H140
219x88x14
H160 H180 H125 H140
416 226x88x14 199x80x14 203x80x14
222x80x14
H160 H180
237x82x16
H200
208x88x14
H140
220x88x14
H160 H180
215x80x14
227x88x14
424
464 242x89x16
H200 256x89x16 268x89x16
H225 H250
291x98x18 227x93x14
H180
242x94x16
H200 589
256x94x16 268x94x16
H225
291x98x18
H250
213X94X14
H140 H160 H180
225X94X14 232X94X14 247X95X16
H200 261X95X16
620 273X95X16
H225
296X98X18
H250
213x102x14 225x102x14 232x102x14
H140 H160 H180
247x103x16
H200 261x103x16
800 273x103x16
H225
296x104x18
H250
**
**
**
unit 898 928 1044 1225 846 906 936 1052 1233 1283 1496 1576 962 991 1103 1284 1334 1552 1632 1787 1927 1758 2158 2063 1431 1480 1703 1780 1933 2068 1903 2197 2202 2242 1143 1243 1466 1515 1733 1810 1968 2103 1949 2248 2253 2290 1263 1471 1654 1711 1925 2007 2170 2313 2720 2938 3372 3474 **
Rag bolt DN2
DN1
a
b2
v
e1
e2
1650 305
880
800 250
820
250
300
880 250
890
980 930
250
940
980
940
300 950
980 300
350 1020
300
1030
1040
**
**
**
**
210 230 190 210 210 210 230 230 230 230 210 210 230 230 230 250 250 250 250 270 270 290 230 230 250 250 250 250 270 270 290 290 210 230 230 230 250 250 270 270 270 270 290 290 210 230 230 230 250 250 270 270 270 270 290 290 **
v2
830 1770 1800
365
1730 1760
595
1145
310
545
x 180
1105
865 880 760
955
1660
830
1740 1810
870 905 830
1030
2140
1070 920
1920
180
315
310
565
570
1125
1170
960
2060
2330 1810
h4
805 750
1920
h3
885 900
1610
1910
f1
825
1165 905
180 315
320 310
590
610 620
1190
1210 1290
960 880
2060
1030
2140
1070
2330
920
1710 1790 1860 1970
890
660
1330
855 895 930
360
595
1265
1095
1970
970
180
985
2190
1710 1790 1860
1310
320
1035
920
640
1165
2070
2380
315
365
615
1285
1190
370
635
1305
855 895 930
360
650
1320
180
985
2070
1035
2190
1095
365
670
1340
2380
980
1190
370
690
1360
**
**
**
**
**
**
* Motor protection type IP 55, dimensions depend on the motor manufacturer.
Dimensions listed are taken fron the SIEMENS catalogue.
** On request.
Designs are subject to amendment without prior notice.
180
**
w*
w1
1947 1947 2070 2145 1870 1907 1907 2030 2105 2105 2240 2240 1957 1957 2080 2155 2155 2290 2290 2430 2430 2550 2550 2775 2155 2155 2290 2290 2430 2430 2550 2550 2775 2775 2007 2130 2205 2205 2340 2340 2480 2480 2600 2600 2825 2825 2007 2130 2205 2205 2340 2340 2480 2480 2600 2600 2825 2825
2070
**
M16x200 2190 2260 1990 2030 M164x200 2150 2220 2370
M18x200
2080 2200 2270
M16x200
2420 2560 M18x200 2680 2910 2270
M16x200
2420 2560 M18x200 2680 2910 2130 2250 2320
M16x200
2470 2610 M18x200 2730 2960 2130 2250 2320
M16x200
2470 2610 M18x200 2730 2960
**
**
Foundation plan for units with spacer type coupling, bearing brackets 25, 35 and 45 w a DN
2 x
h DN
h
1
4
3
minimum length of rag bolt f
e
1 e
v
2
b2
1
w1
Dimensions in mm Tolerances for welded parts acc. to DIN 8570 B Size
32-125
32-160
32-200
32-250
40-125
40-160
40-200
40-250
50-125
50-160
Motor size 71 80 80 90S 90L 90S 90L 100L 112M 90L 100L 112M 132S 132S 132S 160M 160M 80 90S 90L 100L 90S 90L 100L 112M 132S 100L 112M 132S 132S 160M 132S 160M 160M 160L 90S 90L 132S 90L 100L 112M 132S 132S 160M
kW 0.55 0.75 1.10 1.50 2.20 1.50 2.20 3.00 4.00 2.20 3.00 4.00 5.50 7.50 7.50 11.0 15.0 1.10 1.50 2.20 3.00 1.50 2.20 3.00 4.00 5.50 3.00 4.00 5.50 7.50 11.00 7.50 11.00 15.00 18.50 1.50 2.20 5.50 2.20 3.00 4.00 5.50 7.50 11.00
Base plate
Cplg.
No. S272
pump
31
H80 33 S385
34
H95 46 S385 28 S605 H80 S385 30 H95 H80 S605 36 H95 46 S385 S015
H80 30
S434 S303 S385 S303 S434
H95 H80 36 H95
S605
n = 2900 rpm
Weight kg unit 70 71 73 76 79 78 81 89 96 82 90 97 121 131 152 164 177 70 73 76 84 75 78 86 93 116 101 106 123 133 164 152 193 207 225 75 78 116 93 101 108 123 133 164
Rag bolt DN2
DN1
a
b2
e1
e2
v
360
540
320
140
f1
60 32
50
80
490
740
440
80
670
317
192
332
212
372
240
420
260
485
192
332
212 192 212
352 332 372
232
392
260
440
280
505
260 182
485 342
212 225 240 225 240
372 405 420 405 420
260
440
190 60
40
177
x
100
75
740
h4
200
100
730
h3
100
65
100
75
50
65
100
490 361
600
440 325
200 160
540 390 490 390 540
660 600 740 600 660
490 350 440 350 490
170 160 200 160 170
730
740
670
190
60
* Motor protection type IP 55, dimensions depend on the motor manufacturer. Dimensions listed are taken from the SIEMENS catalogue.
Designs are subject to amendment without prior notice.
100
w*
w1
823 857 857 915 915 915 915 956 977 915 956 977 1053 1053 1073 1191 1191 857 915 915 956 915 915 956 977 1053 976 997 1073 1073 1191 1073 1191 1191 1253 935 935 1073 935 976 997 1073 1073 1191
820
M16x200
1140 M20x400
1140
M20x400
1120
M24x400
1140
M20x400
1120
M24x400
1140 920
M20x400 M12x100
1000 920 1140 920 1000
M20x400 M14x200 M20x400 M16x200 M20x400
1120
M24x400
Size
50-200
50-250
65-125
65-160
65-200
65-250
80-160
80-200
80-250
100-160
100-200
100-250
125-200
Base plate
Motor size 100L 112M 132S 132S 160M 160M 160M
kW 3.00 4.00 5.50 7.50 11.00 15.00 15.00
No. S303
160L
18.50
S385
180M 200L 100L 112M 132S 132S 132S 132S 160M 160M 160M 160M
22.00 30.00 3.00 4.00 5.50 7.50 5.50 7.50 11.00 15.00 11.00 15.00
S486
160L
18.50
S385
180M 200L 160L 180M 200L 200L 225M
22.00 30.00 18.50 22.00 30.00 37.00 45.00
S486
132S
7.50
160M 160M 160L 180M 160M 160L
11.00 15.00 18.50 22.00 15.00 18.50
180M
22.00
200L 200L 180M 200L 200L 225M 250M
30.00 37.00 22.00 30.00 37.00 45.00 55.00
160L 180M
18.50 22.00
200L 200L 160L 180M 200L 200L 225M 200L 200L 225M 250M 280S 280M
30.00 37.00 18.50 22.00 30.00 37.00 45.00 30.00 37.00 45.00 55.00 75.00 90.00
250M 280S 280M
Cplg. H80
S434
40 H95
S605
S383 S385
Rag bolt
Weight kg pump
50 H110 H125 H80 33
S434 39 H95 S605
DN2
DN1
a
b2
e1
e2
v
390
600
350
160
540
660
490
170
50
65
100 730
229
490
250 281 108 115 130 141 136 147 167 180 192 206
610 490
65
80
100
730
610
S608 S605
149
730
70
H95 S385
S486 S436
43 H110 H95 H110
60
H125 S607
H110 H125 75
S608
H125 H140 H95 H110
78
H125 S607 H95 H110 70 S608 S607
H125
S608
85
S609A
H140 H160
55.00
S608
H140
75.00 90.00
S609A
H160
190 204 222 237 227 253
740
670
225
425
240
440
260
460
280
x
w*
w1 920
505
976 997 1073 1073 1191 1191 1191
260
485
1253
1140
280 300
505 525
1315 1373 976 997 1073 1073 1073 1073 1191 1191 1191 1191
1250
100
190
440
200
840
550
205
600 740
440
160 200
660
490
740
840
670
170
75
660 60
100
200
550
205
75
730
90
260
485
1253
1140
280
505 525
1250
300
550
575 505
1315 1373 1363 1425 1483 1483 1513 1098
1120
270
325
190
280
440
200
260
485
550
205
280
505 530
490
215
260
510
740 490
610 80
100
840
75
1216 1216 1278 1340 1326 1388
125
269
540
140
550
324 348 295 350 374 450 655
730
940
670
230
300 90
270
325 350
605 630
272 288 343 367 264 280 335 359 445 350 374 461 666 850 892 865 907
1450 1508 1508 1450 1508 1508 1538 1668
580 1060
1000
505
670
M16 x200 M20 x400 M24 x400 M20 x400 M24 x400
920 1140
280
670 1060
1120
460
140 230
1000
260 190
440
940
1120
1400
M20 x400
M24 x400 M20 x400
M24 x400
1600
1140
1250 1270
1400
M24 x400 M20 x400 M24 x400 M20 x400
M24 x400
1600
1388 1450 940
230
300
580
125 730 100
125
670
140 90
1060 940
270 230
1060
270
140
682 100
h4
440
240 300 264 280 389 335 414
H125
h3
240 540
490
H110 H125 H95 H110
f1
60
224
S607
45
unit 105 112 127 137 168 182 211
125
150
140
744
1200
696
300
730
1060
670
270
744
1200
696
300
90
325
605
350 380
630 660
350
665
380
695
* Motor protection type IP 55, dimensions depend on the motor manufacturer.
Dimensions listed are taken from the SIEMENS catalogue.
Designs are subject to amendment without prior notice.
140
1508 1508 1388 1450 1508 1508 1538 1523 1523 1553 1683 1783 1783
1400 M24 x400 1600 1400 1600 1800
1683
1600
1783 1783
1800
M24 x400
Data regarding size - order information Type
Size
Hydraulic + Bearing
Shaft Seal
•S One double row angular contact bearing plus one ball bearing, grease lubricated
041: Self-sealed, uncooled packing rings 052: Uncooled packing rings, external seal liquid AF3: Balanced mechanical seal, seal face materials SiC/Carbon, elastomer EPDM BJ3: Unbalanced bellows mechanical seal, seal face materials SiC/Carbon, elastomer EPDM C23: Unbalanced bellows mechanical seal, seal face materials SiC/Carbon, elastomer EPDM AFS: Balanced mechanical seal, seal face materials SiC/ SiC, elastomer FPM (Viton) BJS: Unbalanced bellows mechanical seal, seal face materials SiC/ SiC, elastomer FPM (Viton) C2S: Unbalanced bellows mechanical seal, seal face materials SiC/ SiC, elastomer FPM (Viton) AFK: Balanced mechanical seal, seal face materials SiC/carbon, elastomer FPM (Viton) double PTFE (Teflon) wrapped BJJ: Unbalanced bellows mechanical seal, seal face materials SiC/Carbon, elastomer FPM (Viton) C2J: Unbalanced bellows mechanical seal, seal face materials SiC/Carbon, elastomer FPM (Viton)
•T One double row ball bearing plus ball bearing, oil lubricated
AX3,AXS,AXK: AF3,AFS,AFK plus quench AY3,AYS,AYK: AF3,AFS,AFK. plus heating A93,A9S,A9K: AF3,AFS,AFK plus external flushing
A• First hydraulic B• Second hydraulic D• Double volute
•B Two ball bearings greased for life (2Z) •C Two ball bearings oil lubricated
Material
Casing Gasket
0B: Cast iron GG25
0C: Cast iron GG25 Bronze G-CuSn10 impeller 0E: Cast iron GG25 stainless steel 1.4408 impeller
2: Confined flat gasket of EWP 210 material
4: Confined flat gasket of PTFE.
4B: Stainless steel 1.4408
•2 Oil lubrication configurations with CLO
ZLND
32125 32160 32200 32250 40125 40160 40200 40250 40315 50125 50160 50200 50250 50315 65125 65160 65200 65250 65315 80160 80200 80250 80315 80400 100160 100200 100250 100315 100400 125200 125250 125315 125400 150200 150250 150315 150400 150500 200250 200315 200400 200500 250300 250315 250400 250500 300400 300500
AB, AC or A2 AB, AC, A2, BB,BC or B2 AB, AC, A2, BB,BC or B2
AB, AC or A2
Alternatively
Alternatively
Alternatively
041,052,BJ3,C23,AF3,AX3,AY3,A93,BJS,C2S, AFS,AXS,AYS,A9S,BJJ,C2J,AFK,AXK,AYK,A9K
0B, 0C, 0E, 4B
2 or 4
AS, AT or A2 AB, AC or A2 AS , AT or A2 DS, DT or D2 AS, AT or A2 DS, DT or D2
Designs are subject to amendment without prior notice.
Sterling Fluid Systems (Spain), S.A. Vereda de los Zapateros s/n, Pozuelo de Alarcón 28223 Madrid, Spain. Telephone +34 91 709 1310 Telefax +34 91 715 9700. E-mail
[email protected]
Designs are subject to amendment without prior notice.
