Petro Eenrgy Kimia(petek-co.ir)
[email protected]
[email protected] @petekco Petro Eenrgy Kimia(petek-co.ir)
[email protected]
telegram.me/petekcompany
petek-co.ir :
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Model Overview 2.a,,Geology: 2.a Sedimentology,Sequence stratigraphy, Fracturation
1,Well description, stratigraphic layering/ coordinates 2.b,,Facies 2.b (seismic) 3,Geostatistical simulation of lithotypes
4,Well test interpretation
5 ,Petrophysical simulation high resolution grid 7 ,Model uses: 1- Vo Volume lumetric/ tric/ Mapping Mapping 2-Assecc Connectivity
6 ,Petrophysical simulation low resolution grid
3- Scale Up Up for Flow Simulati Simulation on 4- Place Wells/ Wells/ Process Process Design Design
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
What is the model
Reservoir Modeling Process
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Petrel Workflow Tools Intro
Zonation & Layering
Well Correlation
Facies Modeling
Fault Modeling
Pillar Gridding
Petrophysical Modeling
Volumetric calculation & well Design
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
User Interface
Menu Bar
Tool Bar
Function Bar First Petrel Explorer Window
Second Petrel Explorer Window @petekcompany
Status Bar
Object Information
GH. KARIMI GEOSTATISTICS RESERVOIR MODELER
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Petrel Introduction Open and saving petrel project Open second petrel project Petrel explorer ◦ Input tab ◦ Model tab ◦ Result tab The numerical results of volume calculation and simulations are store in this tab.
◦ Templates tab Contain all predefined templates in petrel
Project setting and Unit Visualization ◦ Windows ◦ General Intersection
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Data Import General import procedure: 1-Create a new folder 2-Rename folder 3-Use the “import” option to import into the folder Exercise: make a new folder & rename it and import some data
Wells and well tops procedure: 1- Create well and well tops folders 2-Rename folders if desired 3-Import well data (headers, deviation surveys, logs) 4-Import well tops Exercise: make a new well folder & rename it and import well data and well log
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Edit Input Data Imported data will often need some editing to make them suitable for modeling 1- line data imported without a “flag value” indicating line segments. (polygon and stick) Double click on object and go to operation tab
Select split by horizontal length
execute
2- Irregular 2D grid that needing smoothing, and 2D grids or seismic interpretations containing spikes.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Edit Input Data Make/Edit polygons Create a new polygon or start on an active polygon
Create new polygon and deactivate the old
Create new line within existing polygon
Close polygon
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Edit Input Data Make/Edit surface This process is where you can grid data into surface. it is a way of preparing the input data. Several type of data can be used as input :point/line/surface in addition to creating surfaces you can also smooth, blank and fill grid, interactively edit grids and tie a grid to data
Make/Edit surface process
Enter the data to be gridded in main input
Give a name to the output
Define the geometry
Click on suggest setting from input /setting the algorithm tab /the surface is stored in input tab after apply
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Edit Input Data QC the surface
Highlight a surface in the input tab
Open the make/edit surface process and input the highlighted surface in the result tab
Geometry, algorithm and input tab are automatically filled in
By deleting the result surface all the parameter are reset. @petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Edit Input Data Make/Edit surface -interactive smooth
Make sure the Make/Edit surface process is active
Active the smooth area tool in function bar
Select the area of influence in number of grid cell from the bottom toolbar
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Edit Input Data Make/Edit surface –peak remove
Make sure the Make/Edit surface process is active
Active the peak remove tool in function bar
Click directly on the base of peak
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Edit Input Data Surface calculator (is the one of method for create calculated surface – another method use the interpreted surface and isochore)
Right click on a surface and select calculator
Type in a new output name. use the calculator option to create an algebraic expression
Press enter to execute Stored in history field At top of calculator
The new surface will be stored at the bottom of input tab
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Edit Input Data Make isochore Vertical Isochore
Deviated
Isopach
Z top – Z base
Z interpolated – Z base
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Edit Input Data Vertical Well – Isochore point
Highlight one of the well tops and right click on the other well top that will define the isochore interval
Select convert to Isochore point
A new point set data is created in the I input tab .
Right click on the thickness attribute and select use a vertical position The point are now shown as thickness point.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Edit Input Data Vertical Well – Isochore surface
Drop isochore point in the main input of make surface process
Select the thickness Attribute from the Drop down menu For the attribute field
Set geometry
Visual the new isochore map in the 3D window
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Petrel Workflow Tools Intro
Zonation & Layering
Well Correlation
Facies Modeling
Fault Modeling
Pillar Gridding
Petrophysical Modeling
Volumetric calculation & well Design
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Well Correlation Open well section and view data Creating well section Creating well section in 3D window
Make sure all other well section in the window tab are deactivated
Select the add well to well section icon from function bar
Click on the wells in the 3D window a line appear connecting the wells
Curve filling @petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Well Correlation Setting up group panels
Right click on a well in well section and select insert group panel
A folder called group is created. Drag and drop curves into group folder
In the well section window there are multiple logs in one panel
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
WELL TOP model Use in geo Md .
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Well Correlation Well tops – create and edit
Well tops – flattening : all well top be flat
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Well Correlation Interactive facies interpretation
Flood fill discrete log class
Paint discrete log class
Pick up discrete log class
Create new continuous log
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Well Correlation Well seismic
Right click on the seismic cube and select create well seismic stored in global well log
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Well Correlation Bitmap logs
Import bitmap logs like FMI
Edit bitmap logs
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Well Correlation Fit between two curves- group panel
Insert group panel and select the logs
Select one of the log and double click on it until open setting, go to curve filling
Select new from top to bottom under select interval
Set fill parameter and select other curve in fill edge and fill style
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Well Correlation Curve filling- cut offs and property fill
Insert group panel and select the logs
Select one of the log and double click on it until open setting, go to curve filling
Select new from top to bottom under select interval
Set fill parameter and select curve level in fill edge and fill style (cut off, automatic ) in fill pattern
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Well Correlation Ghost curve For compare between two well logs
Select well & well log as require, click on the well header and drag it to another well
The ghost curve will now appear in window
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
well section .
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Petrel Workflow Tools Intro
Zonation & Layering
Well Correlation
Facies Modeling
Fault Modeling
Pillar Gridding
Petrophysical Modeling
Volumetric calculation & well Design
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault Modeling Fault modeling is the process of generating a faulted grid and inserting the horizons, zones and layers into it.
Top shape point Mid shape point Key pillar Base shape point
Line between pillars @petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault Modeling Fault type definition 1.
Vertical fault
2.
Linear fault
3.
Listric fault
4.
Curved fault
Almost any type of fault can be modeled in PETREL: Single, branching and crossing fault Reverse and Normal fault Truncated fault Growth fault @petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault Modeling Different input data 1- Fault stick
3- Fault surface
2- Fault polygon
4- 3D line
5- Seismic @petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault Modeling General workflow
1.
Define a fault model
2.
Model the initial set of fault (generate key pillars)
3.
Edit any problem areas
4.
Trim/Execute to the top and base of the model
5.
Connect fault (required for pillar gridding)
6.
Add more faults by repeating steps 2-5
7.
Do the final edits @petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault Modeling Define model
Open define model in the process diagram and rename it
The new model is stored in model tab
Active the fault modeling process
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault Modeling Fault modeling from fault polygons + Shift to select all po lygon
Create fault from fault polygon
Edit key pillar vertically
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault Modeling Fault modeling from fault sticks + Shift to select all polygon
Create fault from fault sticks, surface or interpretation
Create fault from fault stick
Notice that by choosing this method, a fault will be generated that connect the sticks that you selected. It is better to use create fault from fault sticks, surface or interpretation @petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault Modeling Editing key pillar
By clicking on the plane you can move the shape point in 3D. By clicking on the cylinder you can move the shape point along the tangent of the cylinder
By clicking on the line between shape p oints, you will select all the shape points along the line . You can also combine the icons called select one shape point and select entire pillar, will selecting one key pillar and clicking on the line between shape points.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault Modeling Editing key pillar
Add new pillar to end Add new pillar between
Free movement Move in vertical Move along line tangent only
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault Modeling Automated trimming of fault
Before
After
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault Modeling Connection of faults
Connect two faults Disconnect two faults
Select one pillar of each fault to be connected
Click connect two faults
A connected key pillar be gray color
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault Modeling Automatic Connection of faults
Extend distance: will search for pillars within the given distance and connect them
Remove distance: will remove pillars that are less than the given distance from the connection
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault Modeling Automatic generation of fault Make sure fault modeling in process diagram be active
Right click on the folder of fault sticks or polygon and select convert to fault in fault model
Make folder in fault model and move all the similar fault in it
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Petrel Workflow Tools Intro
Zonation & Layering
Well Correlation
Facies Modeling
Fault Modeling
Pillar Gridding
Petrophysical Modeling
Volumetric calculation & well Design
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Pillar Gridding Make a grid based on the define faults.
The pillars are inserted in between the faults, and there will be one pillar in every corner of each grid cell.
The increment of the grid in the I and j direction are set in the process.
The result of pillar gri dding is a “skeleton grid”, defined by all the faults and all the pillars.
The skeleton is a mesh grid consisting of a top, a mid and a base skeleton grid.
Create grid adjusted to the mid point of the key pillars.
Extrapolate the pillars to the top and base shape points.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Pillar Gridding Pillars
Pillars + Edges
A 3D grid is a 2D grid mesh extended into the third dimension. A 2D grid mesh is defined by rows and columns oriented in the X and Y direction.
Pillars + Edges + Base & Top = Cells @petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Pillar Gridding The pillar gridding process Purpose: Create the skeleton grid for the 3D model. Limit the model in the I and j direction
Input: Fault Model Tasks: 1.
Build boundary
2.
Insert trends and directions
3.
Decide on the increment in I and j direction
4.
Plan the segments
5.
Build the mesh grid
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Pillar Gridding Boundary: Polygon, boundary segment or part of boundary. The faults themselves can be set as part of the boundary.
Trend: Guidance for the grid cell shape and orientation. They can be Defined connecting one fault to another, along faults or in between faults. Trend can not cross faults.
Directions: Guidance for orientation of cells along faults.
Segments: Faulted compartment closed by faults and/or grid boundary.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Pillar Gridding Workflow 1.
Start pillar gridding process
2.
Select the faults
3.
Define the boundary
4.
Define grid name and increment
5.
Build mid skeleton grid (click apply)
6.
Tune mid skeleton grid
7.
Extend pillars to top and base skeletons (click Ok)
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Pillar Gridding Defining a boundary
1- Create boundary (closed polygon) Create boundary segment A boundary must be define around the area of interest. This is done by using a boundary polygon or by creating a more complex boundary involving faults as part of the boundary together with boundary segment
2- Used in combination
3- Convert from polygon ◦
Active the pillar gridding process
◦
Active the correct fault model
◦
Right click on the project boundary in the input tab
◦
Select convert to boundary on the active fault model
Set part of grid boundary
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
in pillar gridding when we define the trend, the trend I and j do cross together. To create the 3d grid we must to define two trend in each border and it is better to define i , j in our boundary.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Pillar Gridding Directions and Trends When the fault geometries are complex, you might need to help the gridding process by giving directions to fault and trends in the grids.
I-Trend J-Trend
(Flow-Fracture-Fault Direction are define trend) First select the I and J trends, then simply digitize the trend where you want to place it.
I-Direction J-Direction Arbitrary- Deselecting a fault direction Automatic direction assignment
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Pillar Gridding Number of cells
Highlighting a trend (endpoints will be become Yellow)
Click on the set number of cells on connection icon
Specify number of cells. Click apply to re-run pillar gridding with the updated changes
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Pillar Gridding Defining Segments
Set part of grid boundary Set part of segment boundary
Set no boundary Set no fault
Faulted compartment closed by faults and/or grid boundary
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Pillar Gridding Edit fault model in the pillar gridding process Activate pillar gridding process and select two neighboring pillars (yellow)
Click on the add pillar between icons
See the result in fault model in 3D window (add pillar between two pillars)
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Pillar Gridding QC – Intersection Open 3D window and display one of the skeletons in addition to an I and/or J intersection
Change the style settings for intersections double click intersections and to
Highlight one of the intersections and use the grid player to move in the I and j directions to look for poorly truncated pillars or spike in the skeleton grid
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Pillar Gridding QC – Segments
Double click on the skeleton folder and toggle show as segments
To check segments use the segment filter to toggle on/off or make a visual display of segments as a legend by right clicking on the segment filter selecting create/ update template
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Petrel Workflow Tools Intro
Zonation & Layering
Well Correlation
Facies Modeling
Fault Modeling
Pillar Gridding
Petrophysical Modeling
Volumetric calculation & well Design
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Zonation & Layering Make Horizon
Depth Conversion
Zonation & Layering Make Zone Layering
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Horizon tab
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Setting tab
A select an algorithm filling in gaps (towards fault/undefined areas). Toggle Convergent gridder (better for faulted horizons)
Collapse zones to zero thickness if less than a specified thickness.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault tab
Set distance to fault: this option allows the user to specify a distance from the fault in the project unit. You have the option to set different distance on the front and backside of the fault.
Displacement: allows the user set the maximum and minimum displacement along the fault. Fault
Distance Surface
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault tab Fault distance can be different in front or behind the fault (Yellow or Blue)
Press the icon to view the blue/yellow faults in a 3D
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault tab
Adjust distance and displacement setting for individual faults: 1.
Make sure that the Use default option is toggled off,
2.
Expand the default for each fault folder in the make horizons work window and select the fault you want to adjust.
3.
After it adjust the distance and displacement setting on selected fault: click apply
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Horizon extrapolation- Distance to fault (problems)
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault- horizon intersection
Geometrical relationship between the fault and the horizon. Can be used as input in the make horizon and scale up zone processes. Creating from: 1.
By re-sampling from a previously defined 3D grid
2.
By digitizing them directly on to fault key pillars in a 3D window
3.
From input polygons
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Fault- horizon intersection Open the setting for the horizon to be edited and go to operations tab Select resample from 3D grid to fault model and press resample. A new horizon line folder will appear
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Objects that can be depth converted are: 1.
Surface
2.
Horizon interpretation
3.
Faults
4.
Points
5.
Well logs
6.
Well tops
7.
Seismic data
8.
3D grids
Depth conversion of a 3D grid is a 2 steps process: 1.
make a velocity model
2.
Depth convert the grid using the velocity model.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
The first step of depth conversion process is to create velocity model. The second step is; where the initial time grid is chosen together with the velocity model and the pillar re-creation setting.
Velocity model workflow 1.
Define zone: insert surface/horizon or constant
2.
Define correction :insert well top
3.
Define velocity equation
4.
Enter input for the velocity model
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Define zone
Create new velocity model. (time (TWT) to depth (Z))
Choose a datum Select seabed from input tab as a input
Select the top horizon from the 3D time grid
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Correction
Input well tops for corrections: 1.
Select none for seabed and well tops for another horizon
2.
Get well tops from input tab, press blue arrow to insert into correction
Correction Option
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Velocity equation
At each location the velocity is constant
(Z0=0) At each location the velocity is changes in the vertical direction by a factor of k. V0 the velocity at datum. Z the distance of the point from datum. typical value for k between 0 and -0.2
For Z0 is not zero.
These should have an attribute representing average velocity between the point in the cube and the datum.
Include the property representing average velocity .such grids can be created by sampling data into the grid or using data analysis and petrophysical modeling to extrapolate from well data.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Velocity equation- Option for input of V0 and k Constant A constant value Surface Defining value at each X-Y location. cover the whole area of the velocity zone Well TDR (constant/surface) The value will be estimated using the time-depth relationship (TDR) through the zone for each well (constant average or interpolated respectively)
Correction (constant/surface) Data in the correction column will be used to define the value. petrel will find the value at the location of each of th e correction points such that the resultant conversion will match the correction point . (constant average or interpolated respectively)
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Depth convert the 3D grid
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Select the stratigraphic interval
Append the number of zones select isochore as input type
Input isochore and well tops
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Parameter setting
Select build from
Select build along
Top horizon isochors added from top of interval
Vertical thickness (TVT)
Base horizon Isochore added from base of interval
Stratigraphic thickness (TST)
Both base and top horizon Only active if rest zone is defined
Along pillar Use when pillars are close to vertical
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Minimum cell thickness
Use min.cell thickness to collapse all thin cells less than the given length (project unit)
No min.cell thickness Min.cell thickness start from base Min.cell thickness start from top
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Select the zone division (four different type)
Specify the number of layer and cell thickness
Optional input of a reference surface
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Geometrical Modeling Geometrical modeling: The process where you can use some pre-defined functions to generate generate properties.( e.g. bulk volume, depth, height above contact, and more).
Geometrical modeling can be done when no input data is available values are assigned ass igned based on grid geometry. Note that if logs are available, you can upscale the well logs and do facies/ petrophysical modeling directly.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Geometrical Modeling Property filter options There are three type of property filters:
1) The I-J-K fifilter It is useful for QC
2) The index filter Skips a users defined amount of cells in all directions
3) The value filter Filters property values If bulk volume has negative value toggle on value filter and select Max=0 to view only negative cell value
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Geometrical Modeling Creating simple facies: 1- in geometrical modeling select create new property 2- selec selectt assign facies between between surface as method method 3- for converted horizons to surface, double click on horizons go to operation and toggle fill in faulted areas and press make surface. 4- selec selectt fluvial facies as property property template template 5- Sele Select ct which facies facies code code to use 6- it is good to open fluvial facies template from the templates templates tab to check that code are correct.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Scale Up Well Logs process
The up-scaling is theprocess where toassign values tothe cells inthe 3D gridthat is penetratedby the welllogs.
1)
Create new property and select input from well logs
2) Select log from drop-down menu (capture from global well log folder)
3- select the best scale up setting
@petekcompany Log as bias
This optionis usedto ensure that the upscaledvalues for apetrophysical property are appropriate for thefacies property forthe same cell.Porosity canbe biasedto afacies log.
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Scale Up Well Logs Averaging methods -The following methods for up-scaling the well logs are available.
Arithmetic mean - Typically used for properties such as porosity, saturation and net/gross because these are additive variables.
Harmonic mean - Gives the effective vertical permeability if the reservoir is layered with constant permeability in each layer. The harmonic mean works well with log nor mal distributions. Used for permeability because it is sensitive to lower values. The method is not defined for negative values.
Geometric mean - Normally a good estimate for permeability if it has no spatial cor relation and is log normally distributed. The geometric mean is sensitive to lower values, which will have a greater influence of results. The method is not defined for negative values.
RMS (Root Mean Squared) - Will provide a strong bias towards high values.
Most of - Will select the discrete value which is most r epresented in the log for each particular cell.
Mid Point Pick – Will pick the log value where the well is halfway through the cell. This is essentially a r andom choice and is therefore more likely to give a pr operty with the same distribution of values as the original well log data.
Random Pick – Picks a log point at random from anywhere within the cell. This random option avoids the smoothing tendency of other methods and is therefore more likely to give a property with the same distribution of values as the original well log data.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Scale Up Well Logs Method (Scale up well logs) Simple - All cells the well trajectory goes through (touches).
Through cell - The well trajectory must go through two opposite cell walls (top and base - opposite sidewalls) of a cell for the cell to be included.
Neighbor cell - This option will average log values from all cells immediately adjacent to the upscaled cell and belonging to the same layer as the upscaled cell. Therefore if there are three adjacent cells along the well path which belong to the same layer, the first will get an average value of the logs from cells 1 and 2, the second from cells 1, 2 and 3 and the third from logs within cells 2 and 3.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Scale Up Well Logs Setting- treat log
As point: Only the points inside the cell will be used as point for the average value given to the cell.
As line: All points along the well trace that have part of their inside the cell will be used.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Scale Up Well Logs Qc of upscaled logs
1- Press the show results in well section or set up the well section display
1-Go to make log tab of setting for wells
2- toggle raw logs from global well logs and upscaled property from properties folder
2- select the property to make log from
3- View the logs and upscaled property
3- press make log button, the log is stored in the global well logs folder and can be toggled on from there
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Scale Up Well Logs Statistic check of the scaled up well logs
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Data Analysis Histogram, CDF (cumulative distribution function)
and Crossplots
Open the window menu bar and select new histogram window
Select perm log from global well logs
Show CDF curve icon
Click on the show viewport setting And change the data range.
In the setting press log value
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Data Analysis Histogram, Cdf and Crossplots
Open function window
Select phi on the X axis and perm on Y axis
Display the perm axis to logaritmic
Calculate the correlation coefficient between the two properties by clicking the make linear function from cross plot
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Data Analysis- Variogram Identify any regional trends in data analysis before you begin the variogram analysis
Two aspects to a variogram: 1- how similar are two values right next to each other 2- how far away do points have to be before they bear no relation to each other. Use spherical model- unless you have good reasons for a model change
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Data Analysis- Variogram Measure variability with distance Large distance=Large variability Calculated in 3 directions: -Horizontal major -Horizontal minor -Vertical
HOLE EFFECT
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Data Analysis- Variogram Direction in variogram The goal of horizontal variogram analysis is to: ◦ ◦
Determine if anisotropy is present Quantify the degree of anisotropy in term of major and minor variogram model ranges.
The vertical ranges in stratified geology are usually a fraction of those identified for the horizontal direction. This vertical vs. horizontal anisotropy is to be expected.
Vertical variogram ◦
Plenty of data
◦
Easily estimate
Horizontal variogram ◦
Usually very little data
◦
Usually implied from geology knowledge
◦
Can be derived from correlated data source
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Data Analysis- Variogram Direction in variogram Often well data is far too sparse to facilitate variogram modeling in the horizontal direction. for example: what if you have a single exploration well. This situation support only vertical variogram analysis, no pairs are available in the horizontal panel. It is common to turn to a correlated secondary source of data. Given a reasonable correlation, one can justify the horizontal analysis on the secondary data. this data is used as a proxy or substitute for the purpose of interpreting the direction and major and minor range values.
COMMENT The vertical modeling should be done on raw log data and make sure the simbox is turned off.for lateral modeling the upscaled logs should be used and the simbox should then then be on. @petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Data Analysis- Variogram Variogram map and sample variogram generation in Petrel Variogram map: Good for visualizing anisotropy and its direction
Sample variogram: Good for finding major and minor range horizontally
Other variogram type for point data and surfaces: -Classical variogram: used as default in petrel -Pairwise relative: each pair is normalized by the square average -Logarithmic: logarithmic values used instead of original values. -Semimadogram: uses the absolute difference instead of the squared difference.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Data Analysis- Variogram Variogram map calculation of point data set Open setting for the point data Go to variogram tab and select variogram map and change the setting under the XY range tab Click the execute button to calculate variogram map Open map window and display the variogram map. eventually push the view all in viewport icon
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Data Analysis- Variogram Sample variogram calculation and Define a variogram model 1.
Generate sample variogram on selected parameter and define the settings then press the execute
2.
Display the sample variogram in a function window.
3.
Click on the make variogram for sample variogram icon. define the model, range and nugget for display sample
4.
Right click on the variogram model and select setting, the major and minor range are display.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Data Analysis- Kriging Simple Kriging Ordinary kriging
Default kriging algorithm in petrel is simple kriging
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Data Analysis- Simulation Principle Normal score Stationary( mean of the data does not change) No trend
Note: The make/edit surface process automatically transforms input data to normal score. The simulation results are backtransformed automatically In the property modeling a normal score transformation is used automatically as well, unless you see the transformations in the data analysis process.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Data Analysis- Simulation The interaction between a CDF and a variogram Before running a SGS, the variogram and distribution setting needs to be specified. The variogram gives the range, Azimuth and etc. A CDF will be set up from the normal scored data. However it is possible to change the CDF, by changing the output data range.
Influence of variogram model type Exponential and spherical model give similar results.
Gaussian model gives smooth result
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Data Analysis-
Setting for Property Modeling
Condition with facies
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Data Analysis-
Proportion : vertical facies variation
Thickness: individual facies interval thickness
Setting for Facies Modeling
Probability: calibration with seismic attribute (AI). Relation between continuous and discrete logs
Variogram: spatial facies continuity @petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Incorporate the maximum amount of data Well Data
Seismic Data
Production
Outcrop
Other Geological Studies
Integrated Study Structure (Horizon, Fault) •Stratigraphic Modeling •Facies Images •
Deterministic Information
Sedimentological Model •Facies Description •Connectivity •
Conceptual Information
Statistical Information
Histogram Variogram •Correlation •Trend •Variation • •
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
The main division in the modeling algorithms available in Petrel is between deterministic algorithms and stochastic ones.
Deterministic algorithms will always give the same result with the same input data. Stochastic algorithms on the other hand use a random seed in addition to the input data, so whilst consecutive runs will give similar results with the same input data, the details of the result will be different. There are of course advantages to both of these methods. Deterministic algorithms will generally run much quicker and are very transparent – it is easy to see why a particular cell has been given a particular value. The disadvantage is that models with little input data will automatically be smooth even though eviden ce and experience may suggest that this is not likely. Getting a good idea of the uncertainty of a model away from the input data points is often difficult in such models.
Stochastic algorithms such as Sequential Gaussian Simulation are more complex and therefore take much longer to run, but they do honor more aspects of the input data, specifically the input data’s variability. This means that local highs and lows will appear in the result which are not steered by the input data and whose location is purely an artifact of the random seed used. The result will therefore have a distribution more typical of the real case although the specific variation are unlikely to match. This can be useful, particularly when taking the model further to simulation as the variability of a property is likely to be just as important as it’s average value. The disadvantage is that some important aspects of the model may be random and it is therefore important to perform a proper uncertainty analysis with several realizations of the same prop erty model with different random seeds.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Reliable permeability data is rarely available to the same extent as porosi ty data and as there is often a relationship between these two properties, it is common practice to base permeability model directly upon the porosity model. There are a number of ways to do this which vary in complexity as well as in requirements in data and time. When evaluating which option to use, it is important to consider how much data is required to make the result meaningful and how much benefit the additional complexity will bring.
Simple linear relationship The simplest method of generating a permeability model from a porosity model is to use a straightforward transformation from a porosity / permeability cross plot. This can be useful if the relationship is relatively good and there is little input data or if a rapid result is required for early stage assessment. a random element can be added via a normal distribution to generate a simple cloud type transform, moving away from the unrealistic straight linear type relationship. Incorporating porosity values in the equation i.e. in the definition of the standard deviation, allow the user to create more complex transformations. One major drawback of this method is that whilst a statistically reasonable fit may be achieved, the distribution does not take spatial continuity into account. i.e. cells with very high values of permeability may be located next to cells with low values. This is unlikely to have an important effect in reservoirs with very good or very poor permeability distributions but may have a marked effect in reservoirs with important spatial trends, particularly if the model is used for simulation purposes. The cross plot to the left shows the relationship between porosity and permeability in the upscaled cells and a best fit line through those, whilst that to the right shows the modeled porosity and permeability using the best fit multiplied by a normal distribution.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
How to generate a Permeability model from a linear poro-perm relationship 1. Upscale porosity logs and model the porosity model as normal. 2. Upscale permeability logs. 3. Open a function window and plot Porosity (X) against Permeability (Y), displaying upscaled cells only. 4. Use and to make the axes logarithmic if required. 5. Press Make Linear Function to generate a best fit function through the cross plot points. The function will appear in a function folder in the input tab. If one of the 6. Rename the function as PoroPerm. 7. Open the property calculator and type Permeability = PoroPerm (Porosity).
To generate a simple cloud type transform use the equation Permeability = PoroPerm (Porosity)*Normal(1,0.15) where 0.15 is the standard distribution to apply at each cell.
A teardrop shape with greater variation at higher porosity values can be added by making the standard deviation a function of the normalized porosity i.e. Permeability = PoroPerm(Poros ity)*Normal(1,0.15*(porosity/0.2)) where 0.2 is the average por osity.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Petrel Workflow Tools Intro
Zonation & Layering
Well Correlation
Facies Modeling
Fault Modeling
Pillar Gridding
Petrophysical Modeling
Volumetric calculation & well Design
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
.
.
.
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Facies Modeling •
Overview Deterministic
Interactive drawing, seismic volume extraction, indicator kriging
FACIES MODELING
Pixel base
Indicator simulation
Object base
Facies with defined shapes, object, fluvial
Stochastic
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Facies Modeling Overview If well logs are upscaled they can be used in deterministic and stochastic modeling. if no logs are available, only used unconditional stochastic method and interactive drawing
Two modeling setting buttons are available: 1.
Common
2.
Zone setting
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Facies Modeling Common and Zone setting Common setting for all zones are entered and the zone setting for specific zone .
Common tab 1.
Use filter
2.
Ensure that all cells ge t value
3.
Number of realization
Zone setting ◦
◦
Define zone setting for all zone Leave the zone button off ◦ ◦ Press the leave zone Use one algorithm for all zones ◦ Define zone setting for each zone ◦ Press the zone button ◦ Select the interest zone Select the method and algorithm ◦
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Facies Modeling Sequential Indicator Simulation
Make sure to pick the upscaled property and select SIS method
Select the facies from the template
If do the data analysis click the data analysis icons, if do not it do it at this setting
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Facies Modeling When we select this option only use the property that was upscaled and be in the property folder. When we do not select this option we will use all of the property in the template window
When we select the use existing Property we can define the facies Template and we do data analysis Just select this button.
When we did data analysis and variogram modeling we select these buttons and do not need do another data analysis
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Facies Modeling Object modeling
-Select the correct property - select object modeling method
- Select the fluvial channel icon to insert channel body -Select facies property to mach channel - and levee
NOTE: -The object modeling combine to another facies modeling at the same zone in the background -Ellipse is the part of body lithology. When we had part of body we select the ellipse and rename it on modify name of body
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Facies Modeling Object modeling- channel setting Layout Specify channel direction, wavelength and amplitude
Channel Specify channel width and thickness
Levee Specify levee width and thickness. Levee smaller than channel
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Facies Modeling •Object modeling- Ellipse setting Geometry -Select the body shapes from drop d awn menu - set the orientation, width and thickness
Rules -Specify whether the facies will replace other facies or not.
Trend Vertical (function curve) Area (probability map)
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Facies Modeling Object modeling- background
When we do not know what is the background When the back ground is the one lithology When we had another lithology in the background and the channel is the one of the lithology
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Facies Modeling Interactive facies modeling
Brush type Facies type Radius
Profile @petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Facies Modeling (Truncate Gaussian Simulation Algorithm) • Facies transition simulation (Truncate Facies transition simulation allows a stochastic distribution of the facies based on given transition between facies
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Petrel Wor orkfl kflow ow Too ools ls Intro
Zonation & Layering
Well Correlation
Facies Modeling
Fault Modeling
Pillar Gridding
Petrophysical Modeling
Volumetric calculation & well Design
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Petrophysical Modeling Common and Zone setting
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Petrophysical Modeling Sequential Gaussian Simulation Method
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Petrophysical Modeling QC Result
QC result in histogram -Go to setting and select histogram tab check that the histogram fallow the distribution 1- Raw Data 2- Up scaled cells 3- 3D grid
Filter 4- Use zone filter 5- Filter on other property value by pressing the filter button and go to property f ilter in setting for the properties folder
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Petrophysical Modeling Property Calculator This calculator can be used to create new 3D properties and do operations between properties
Creating a new property model:
Right click on property folder in the 3D grid and select calculator Change the property template to NET/GROSS and type into the while formula field: NG=0.8 Type in NetVol = Bulk_Volume*NG. select the net volume template. Press ENTER.
When we do not any template, generate one Some of property we generate them on Geometrical Modeling
@petekcompany
Petro Eenrgy Kimia(petek-co.ir)
[email protected]
Petrel Workflow Tools Intro
Zonation & Layering
Well Correlation
Facies Modeling
Fault Modeling
Pillar Gridding
Petrophysical Modeling
Volumetric calculation & well Design
@petekcompany
telegram.me/petekcompany
/ petek-co.ir
:
telegram.me/petekcompany
/ petek-co.ir
:
Course Title Of petro Energy Kimia
)
( 0000
0
00000
0
0000
7
9
EX-09
92
RE-27 & 30
6
11 011
E-06
Que$tor
49-4 60000
EX-25
Petrel
200000
EX-42
00000 )
49(
EX-48
)Visage(
4 -94 0000
EX-12
97 -92
) DFN(
700000
EX-27
600000
-
CMR Geolog
7298002346 :
729648340 -8 :
233
Info@Petek -co.ir, Training@Petek -co.ir :
:
www.Petek -co.ir :
EX-16
Course Title Of petro Energy Kimia
00000
DR-07
6 -
400000
4 -46
Top
DR-37
Drive
700000
99-9
DR-08
4900000
RE-07 )ESP(
)IADC WellSharp(
No
Training Course
1 2 3
Case 1: IADC WellSharp Certification Introduction Course Driller Course Supervisor Course
Training Duration Location
Min. Batch Size
Price per head in USD $
Tehran Tehran Tehran
4 days 5 days 5 days
10 10 10
1,450 1,800 1,800
Tehran Tehran Tehran
4 days 5 days 5 days
10 10 10
1,450 1,600 1,600
Case 2: In-house Certification 1 2 3
Introduction Course Driller Course Supervisor Course
7298002346 :
729648340 -8 :
233
Info@Petek -co.ir, Training@Petek -co.ir :
:
www.Petek -co.ir :
