Standards

standards

List of ASEAN Standards approved / withdrawn / amended in 2002

MALAYSIA STANDARDS APPROVED MS 1531:2002 Methods of test for honey MS 1044:Part 4:2002 Specification for mosquito vapourising mat : Part 4 : Method for the evaluation of biological efficacy - Peet Grady method MS 81:Part 14:2002 Method of sampling and test for spices and condiments : Part 14 : Determination of lead MS ISO 3084:2002 Iron Ores – Experimental methods for evaluation of quality variation

MS 308 : Part N01:2002 Textiles – Tests for colour fastness – Part N0 1: Colour fastness to bleaching: Hypochlorite (Supersedes MS 308 : Part 20 : 1975) MS ISO 4701:2002 Iron Ores – Determination of size distribution by sieving MS ISO 105-N03:2002 Textiles – Tests for colour fastness – Part N0 3: Colour fastness to bleaching : Sodium chlorite (mild) (Supersedes MS 308 : Part 21 : 1977) MS ISO 3852:2002 Iron Ores – Determination of bulk density

MS 133:Part E8:2002 Methods of test for paints and varnishes : Part E8 : Resistance to impact (Pendulum test)

MS ISO 105-N04:2002 Textiles – Tests for colour fastness – Part N04: Colour fastness to bleaching : Sodium chlorite (severe) (Supersedes MS 308 : Part 22 : 1977)

MS ISO 105-X06:2002 Textiles – Tests for colour fastness – Part X06: Colour fastness to soda boiling (Supersedes MS 308 : Part 11 : 1975)

MS ISO 105-X09:2002 Textiles – Tests for colour fastness – Part X09: Colour fastness to formaldehyde (Supersedes MS 308 : Part 24 : 1977)

MS ISO 3688:2002 Pulps – Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO Brightness)

MS ISO 105-P01:2002 Textiles – Tests for colour fastness – Part P01: Colour fastness to dry heat (excluding pressing) (Supersedes MS 308 : Part 23 : 1980)

MS ISO 105-X05:2002 Textiles – Tests for colour fastness – Part X05: Colour fastness to organic solvents (Supersedes MS 308 : Part 17 : 1975) MS ISO 2469:2002 Paper, board and pulps – Measurement of diffuse blue reflectance factor

MS ISO 3087:2002 Iron Ores – Determination of the moisture content of a lot

fastness to vulcanisation : Open steam (Supersedes MS 308 : Part 25 : 1980) MS ISO 105-E14:2002 Textiles – Tests for colour fastness – Part E14: Colour fastness to acid-felting : Mild (Supersedes MS 308 : Part 34 : 1980) MS ISO 105-X14:2002 Textiles – Tests for colour fastness – Part X14: Colour fastness to acid chlorination of wool : Sodium dichloroisocyanurate (Supersedes MS 308 : Part 26 : 1977) MS ISO 105-E11:2002 Textiles – Tests for colour fastness – Part E11: Colour fastness to steaming (Supersedes MS 308 : Part 35 : 1980) MS ISO 105-X04:2002 Textiles – Tests for colour fastness – Part X04: Colour fastness to mercerizing (Supersedes MS 308 : Part 27 : 1980) MS ISO 105-S01:2002 Textiles – Tests for colour fastness – Part S01: Colour fastness to vulcanization : Hot air (Supersedes MS 308 : Part 36 : 1980) MS ISO 105-N05:2002 Textiles – Tests for colour fastness – Part N05: Colour fastness to stoving (Supersedes MS 308 : Part 28 : 1977)

MS ISO 3082:2002 Iron Ores – Sampling and sample preparation procedures

MS ISO 105-S02:2002 Textiles – Tests for colour fastness – Part S02: Colour fastness to vulcanization: Sulfur monochloride (Supersedes MS 308 : Part 37 : 1980)

MS ISO 105-S03:2002 Textiles – Tests for colour fastness – Part S03: Colour

MS ISO 105-E02:2002 Textiles – Tests for colour fastness – Part E02: Colour

ASEAN STANDARDS AND QUALITY

38

standards

fastness to sea water (Supersedes MS 308 : Part 29 : 1977)

MS ISO 105-D01:2002 Textiles – Tests for colour fastness – Part D01: Colour fastness to dry cleaning (Supersedes MS 308 : Part 38 : 1980) MS ISO 105-E07:2002 Textiles – Tests for colour fastness – Part E07: Colour fastness to spotting : Water (Supersedes MS 308 : Part 30 : 1977) MS ISO 105-X10:2002 Textiles – Tests for colour fastness – Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings (Supersedes MS 308 : Part 39 : 1980) MS ISO 105-N02:2002 Textiles – Tests for colour fastness – Part N02: Colour fastness to bleaching : Peroxide (Supersedes MS 308 : Part 31 : 1980) MS ISO 105-B05:2002 Textiles – Tests for colour fastness – Part B05: Detection and assessment of photochromism (Supersedes MS 308 : Part 40 : 1980) MS ISO 105-E12:2002 Textiles – Tests for colour fastness – Part E12: Colour fastness to milling : Alkaline milling (Supersedes MS 308 : Part 32 : 1980) MS ISO 105-B03:2002 Textiles – Tests for colour fastness – Part B03: Colour fastness to weathering : Outdoor exposure (Supersedes MS 308 : Part 41 : 1980) MS ISO 105-E13:2002 Textiles – Tests for colour fastness – Part E13: Colour fastness to acid-felting : Severe

(Supersedes MS 308 : Part 33 : 1980) MS ISO 105-B04:2002 Textiles – Tests for colour fastness – Part B04: Colour fastness to artificial weathering : Xenon arc fading lamp test (Supersedes MS 308 : Part 42 : 1980) MS ISO 105-P02:2002 Textiles – Tests for colour fastness – Part P02: Colour fastness to pleating - Steam pleating (Supersedes MS 308 : Part 43 : 1980) MS ISO 10545-16:2002 Ceramic tiles Part 16: Determination of small colour differences MS 133 : Part E14:2002 Methods of test for paints and varnishes : Part E14 : Determination of resistance to abrasion (Rotating abrasivepaper-covered wheel) MS ISO 10545-5:2002 Ceramic tiles Part 5: Determination of impact resistance by measurement of coefficient of restitution MS 133 : Part E15:2002 Methods of test for paints and varnishes : Part E15 : Determination of resistance to abrasion (Rotating abrasive rubber wheel) MS ISO 10545-1:2002 Ceramic tiles - Part 1: Sampling and basis for acceptance (Supersedes MS 1090 : 1987) MS 133 : Part E16:2002 Methods of test for paints and varnishes : Part E16 : Determination of resistance to abrasion (Reciprocating test panel) MS ISO 10545-2:2002 Ceramic tiles Part 2: Determination of dimensions and surface quality (Supersedes MS 1091 : Part 1 : 1987)

MS 133 : Part E17:2002 Methods of test for paints and varnishes : Part E17 : Determination of mar resistance using a curved stylus MS 1533:2002 Recommended practices in monitoring electric power quality MS 133 : Part E18:2002 Methods of test for paints and varnishes: Part E18 : Determination of mar resistance using a pointed stylus MS 1534:Part 1:2002 Specification for conduit systems for electrical installations : Part 1 : General requirements (Supersedes MS 67 : Part 1 : 1972) MS 133 : Part E19:2002 Methods of test for paints and varnishes: Part E19 : Determination of film hardness by pencil test MS

1534:Part 2:Section 1:2002 Specification for conduit systems for electrical installations : Part 2 : Particular requirements : Section 1 : Rigid conduit systems (Supersedes MS 67 : Part 1 : 1972) MS 1532:2002 Thermal Insulation – Determination of steady-state thermal transmission properties – Calibrated and guarded hot box MS 1535:Part 1:2002 Domestic gas cooking appliances for use with liquefied gases : Part 1 : Specification MS ISO 10545-10:2002 Ceramic tiles Part 10: Determination of moisture expansion MS ISO 4306-2:2002 Cranes – Vocabulary – Part 2: Mobile cranes

ASEAN STANDARDS AND QUALITY

39

standards

MS ISO 10545-15:2002 Ceramic tiles Part 15: Determination of lead and cadmium given off by glazed tiles

MS ISO 180:2002 Plastics – Determination of izod impact (Supersedes MS 1270 : 1992)

MS ISO 6892:2002 Metallic material - Tensile testing at ambient temperature (Supersedes MS 592 : 1979)

MS ISO 2566/1:2002 Steel and steel products Conversion of elongation values - Part 1: Carbon and low alloy steels

MS 1535:Part 2:2002 Domestic gas cooking appliances for use with liquefied gases : Part 2 : General construction

MS ISO 179-1:2002 Plastics – Determination of charpy impact properties – Part 1: Non- instrumented impact test

MS ISO/IEC 17799:2002 Information technology – Code of practice for information security management (Supersedes MS 1511 : Part 1 : 2001 (P))

MS 1536:Part 1:2002 Information technology – Guidelines for the management of IT security : Part 1 : Concepts and models for IT security (Supersedes MS ISO/IEC TR 13335-1:2001 (P))

MS 1535:Part 3:2002 Domestic gas cooking appliances for use with liquefied gases : Part 3 : Test methods

MS ISO 179-2:2002 Plastics – Determination of charpy impact properties – Part 2: Instrumented impact test MS 1536:Part 2:2002 Information technology – Guidelines for the management of IT security : Part 2 : Managing and planning IT security (Supersedes MS ISO/IEC TR 13335-2:2001 (P))

MS 1537:2002 Information security management : Specification for information security management systems (Supersedes MS 1511 : Part 2 : 2001 (P)) MS 1535:Part 4:2002 Domestic gas cooking appliances for use with liquefied gases : Part 4 : Glossary MS ISO 19105:2002 Geographic information Conformance and testing

–

MS ISO 783:2002 Metallic material - Tensile testing at elevated temperature MS 1536:Part 4:2002 Information technology – Guidelines for the management of IT security : Part 4 : Selection of safeguards MS ISO 15579:2002 Metallic material - Tensile testing at low temperature

ASEAN STANDARDS AND QUALITY

40

MS ISO 294-1:2002 Plastics – Injection moulding of test specimens of thermoplastic materials–Part 1: General principles, and moulding of multipurpose and bar test specimens (Supersedes MS 1335 : 1993) MS 1536:Part 3:2002 Information technology – Guidelines for the management of IT security : Part 3 : Techniques for the management of IT security (Supersedes MS ISO/IEC TR 13335-3:2001 (P)) MS ISO 294-2:2002 Plastics – Injection moulding of test specimens of thermoplastics materials – Part 2: Small tensile bars

MS ISO 294-3:2002 Plastics – Injection moulding of test specimens of thermoplastics materials – Part 3: Small plates MS ISO 2598-2:2002 Iron ores – Determination of silicon content – Part 2: Reduced molybdosilicate spectrophotometric method MS

1513:Part 1:Sub-Part 1:2002 Packaging – Transport of dangerous goods : Part 1 : General provisions, definitions and training : Sub-Part 1 : General provisions MS IEC 61032:2002 Protection of persons and equipment by enclosures – Probes for verification MS ISO 2234:2002 Packaging – Complete, filled transport packages and unit loads – Stacking tests using a static load (Supersedes MS 989 : Part 3 : 1985) MS IEC 60529:2002 Degree of protection provided by enclosures (IP code) MS ISO 2244:2002 Packaging – Complete, filled transport packages and unit loads – Horizontal impact tests (Supersedes MS 989 : Part 5 : 1985) MS IEC 60670:2002 General requirements for enclosures for accessories for household and similar fixed electrical installations MS 1538:2002 Specification for speed monitoring device for road vehicles MS IEC 60335-2-10:2002 Safety of household and similar electrical appliances: Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines

standards

MS 1539:Part 1:2002 Specification for portable fire extinguishers : Part 1 : Construction and testing methodology (Supersedes MS 1179 : 1990 and MS 864 : 1983) MS

IEC 60335-2-3: Amendment 2:2002 Safety of household and similar electrical appliances: Part 2-3: Particular requirements for electric irons MS ISO 10015:2002 Quality management Guidelines for training

-

Particular requirements for humidifiers intended for use with heating, ventilation or airconditioning systems MS ISO 2598-1:2002 Iron ores – Determination of silicon content – Part 1: Gravimetric methods MS

IEC 60335-1: Amendment 2:2002 Safety of household and similar electrical appliances: Part 1: General requirements MS IEC 60983:2002 Miniature lamps

IEC 60335-2-3: Amendment 1:2002 Safety of household and similar electrical appliances: Part 2-3: Particular requirements for electric irons

MS IEC 61000-2-4:2002 Electromagnetic compatibility (EMC) – Part 2: Environment – Section 4: Compatibility levels in industrial plants for lowfrequency conducted disturbances

MS ISO 3085:2002 Iron ores – Experimental methods for checking the precision of sampling

MS IEC 60662:2002 High-pressure sodium lamps

MS

vapour

MS IEC 60335-2-8:2002 Safety of household and similar electrical appliances: Part 2-8: Particular requirements for shavers, hair clippers and similar appliances

MS IEC 61000-2-9:2002 Electromagnetic Compatibility (EMC) – Part 2: Environment – Section 9: Description of HEMP environment – Radiated disturbance – Basic EMC publication

MS ISO 3086:2002 Iron ores – Experimental methods for checking the bias of sampling

MS CISPR 14-1:2002 Electromagnetic compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1 – Emission

MS IEC 60335-2-45:2002 Safety of household and similar electrical appliances: Part 2-45: Particular requirements for portable heating tools and similar appliances MS ISO 3310-2:2002 Test sieves – Technical requirements and testing – Part 2: Test sieves of perforated metal plate MS IEC 60335-2-88:2002 Safety of household and similar electrical appliances: Part 2-88:

MS IEC 61000-2-10:2002 Electromagnetic Compatibility (EMC) - Part 2-10: Environment – Description of HEMP environment – Conducted disturbance MS CISPR 15: Amendment 2:2002 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

MS IEC 61000-4-1:2002 Electromagnetic Compatibility (EMC) Part 4 : Testing and measurement techniques Section 1: Overview of immunity tests – Basic EMC publication MS CISPR 16-2:2002 Specification for radio disturbance and immunity measuring apparatus and methods Part 2: Methods of measurement of disturbances and immunity MS IEC 61000-4-9:2002 Electromagnetic Compatibility (EMC) Part 4: Testing and measurement techniques – Section 9: Pulse magnetic field immunity test Basic EMC publication MS CISPR 21:2002 Interference to mobile radio communications in the presence of impulsive noise – Methods of judging degradation and measures to improve performance MS IEC 61000-4-24:2002 Electromagnetic Compatibility (EMC) - Part 4: Testing and measurement techniques – Section 24: Test methods for protective devices for HEMP conducted disturbance Basic EMC publication MS CISPR 23:2002 Determination of limits for industrial, scientific and, medical equipment MS IEC 61000-5-5:2002 Electromagnetic Compatibility (EMC) - Part 5: Installation and mitigation guidelines – Section 5: Specification of protective devices for HEMP conducted disturbance – Basic EMC publication MS CISPR 25:2002 Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board vehicles

ASEAN STANDARDS AND QUALITY

41

standards

MS IEC 61800-3:2002 Adjustable speed electrical power drive system – Part 3: EMC product standard including specific test methods

methods and results – Part 5 : Alternative methods for the determination of the precision of a standard measurement method

MS ISO 6804:2002 Rubber hoses and hose assemblies for washing machines and dishwashers Specification for inlet hoses

MS IEC 61000-2-2:2002 Electromagnetic Compatibility (EMC) Part 2: Environment Section 2: Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems

MS IEC 61547:2002 Equipment for general lighting purposes – EMC immunity requirements

MS ISO 5725-2:2002 Accuracy (trueness and precision) of measurement methods and results – Part 2 : Basic method for the determination of repeatability and reproducibility of a standard measurement method

MS IEC 62040-2:2002 Uninterruptible power systems (UPS) – Part 2 – Electromagnetic compatibility (EMC) requirements MS IEC 61326-1:2002 Electrical equipment for measurement, control and laboratory use – EMC requirements – Part 1: General requirements MS ISO 5725-3:2002 Accuracy (trueness and precision) of measurement methods and results – Part 3 : Intermediate measures of the precision of a standard measurement method MS IEC 60601-1-2:2002 Medical electrical equipment Part 1: General requirements for safety 2. Collateral Standard: Electromagnetic compatibility – Requirements and tests MS ISO 5725-4:2002 Accuracy (trueness and precision) of measurement methods and results – Part 4 : Basic methods for the determination of the trueness of a standard measurement method MS 1540:2002 Specification for the material, marking and dimensions of crimp type cable lugs for use with copper conductors in low voltage applications MS ISO 5725-5:2002 Accuracy (trueness and precision) of measurement

ASEAN STANDARDS AND QUALITY

42

MS ISO 5725-6:2002 Accuracy (trueness and precision) of measurement methods and results – Part 6 : Use in practice of accuracy values MS ISO 10715:2002 Natural gas – Sampling guidelines MS ISO 2859-4:2002 Sampling procedures for inspection by attributes : Part 4 : Procedures for assessment of stated quality levels MS ISO 14111:2002 Natural gas – Guidelines traceability in analysis

to

MS ISO 11453:2002 Statistical interpretation of data – Tests and confidence intervals relating to proportions MS ISO 13734:2002 Natural gas – Organic sulfur compounds used as odorants – Requirements and test methods MS ISO 11843-2:2002 Capability of detection – Part 2: Methodology in the linear calibration case MS ISO 10723:2002 Natural gas – Performance evaluation for on-line analytical systems MS ISO 1403:2002 Rubber hoses, textilereinforced, for general-purpose water application - Specification MS ISO 5725-1:2002 Accuracy (trueness and precision) of measurement methods and results – Part 1 : General principles and definitions

MS ISO 4665:2002 Rubber, vulcanized and thermoplastic – Resistance to weathering MS ISO 1853:2002 Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement or resistivity MS ISO 4570-2:2002 Tyre valve threads – Part 2: Threads 9V1, 10V2, 12V1 and 13V1 MS ISO 3384:2002 Rubber, vulcanized or thermoplastic – Determination of stress relaxation in compression at ambient and at elevated temperature (Supersedes MS 1157 : Part 32 : 1991) MS ISO 4570-3:2002 Tyre valve threads – Part 3: Threads 8V2, 10V1, 11V1, 13V2, 15V1, 16V1, 17V1, 17V2, 17V3, 19V1, 20V1 MS ISO 48:2002 Rubber, vulcanized or thermoplastic- Determination of hardness (Hardness between 10 IRHD and 100 IRHD) (Supersedes MS 1157 : Part A1 : 1995) MS ISO 6762:2002 Tyre valve – ISO core chamber No. 2 MS ISO 1817:2002 Rubber, vulcanized Determination of the effect of liquids (Supersedes MS 1157 : Part 20 :

standards

1991) MS ISO 9413:2002 Tyre valve – Dimensions and designation MS ISO 132:2002 Rubber, vulcanized or thermoplastic - Determination of flex cracking and crack growth (De Mattia) (Supersedes MS 1157 : Part 10 : 1993) MS ISO 8330:2002 Rubber and plastic hoses and hose assemblies - Vocabulary MS 1541:2002 Rubber latex, natural, concentrate - Determination of sludge content MS ISO 11424:2002 Rubber hoses and tubing for air and vacuum systems for internal - combustion engines Specification MS ISO 6502:2002 Rubber – Guide to the use of curemeters MS 1542:2002 Rubber, raw natural – Determination of dirt content (Supersedes MS 1359 : Part 3 : 1994) MS ISO 36:2002 Rubber, vulcanized or thermoplastic – Determination of adhesion to textile fabric MS ISO 498:2002 Natural rubber latex concentrate preparation of dry films MS ISO 4000-1:2002 Passenger car tyres and rims – Part 1: Tyres (metric series) MS ISO 3821:2002 Gas welding equipment – Rubber hoses for welding, cutting and allied processes MS ISO 4570-1:2002 Tyre valve threads – Part 1: Threads 5V1, 5V2, 6V1 and 8V1

MS 1543:2002 Specification for duck feeds

MS 1544 : Part 1: 2002 Cranes – Safe use : Part 1 : General MS 1547:2002 Rubber, latex - Determination of density between 5 ºC and 40 ºC MS ISO 965-1:2002 ISO general purpose metric screw threads – Tolerances – Part 1: Principles and basic data (Supersedes MS 220 : 1974) MS 1548:2002 Rubbers, raw – Determination of volatile-matter content (Supersedes MS 1359 : Part 2 : 1994) MS ISO 2566/2: 2002 Steel – Conversion of elongation values – Part 2: Austenitic steels MS 1549:2002 Test method for determination of residual powder on powder free rubber medical gloves MS ISO 377:2002 Steel and steel products – Location and preparation of samples and test pieces for mechanical testing MS 1550:2002 Test method for determination of residual powder on powdered rubber medical gloves MS 1513: Part 7:2002 Packaging – Transport of dangerous goods: Part 7: Provisions concerning transport operations MS ISO 3310-1:2002 Test sieves – Technical requirements and testing – Part 1 : Test sieves of metal wire cloth MS ISO 779:2002 Paper, board and pulps – Determination of iron (Supersedes MS 129 : Part 7 :

1973) MS 1551:2002 Specification for soda ash (sodium carbonate) used for potable water supply MS ISO 7764:2002 Iron ores – Preparation of predried test samples for chemical analysis MS ISO 105-F:2002 Textiles – Tests for colour fastness – Part F: Standard adjacent fabrics MS ISO 9035:2002 Iron ores – Determination of acid-soluble iron (II) content – Titrimetric method MS ISO 105-F10:2002 Textiles – Tests for colour fastness – Part F10: Specification for adjacent fabrics: Multifibre MS ISO 2597-1:2002 Iron ores – Determination of total iron content – Part 1 : Titrimetric method after tin (II) chloride reduction MS ISO 776:2002 Pulps – Determination of acidinsoluble ash (Supersedes MS 129 : Part 1 : 1973) MS ISO 8124-3:2002 Safety of toys: Part 3: Migration of certain elements (Supersedes MS EN 71 : Part 3 : 1998) MS ISO 638:2002 Pulps – Determination of dry matter content (Supersedes MS 129 : Part 2 : 1973) MS ISO 6529:2002 Protective clothing – Protection against chemicals – Determination of resistance of protective clothing materials to permeation by liquids and gases MS ISO 692:2002 Pulps – Determination of alkali solubility

ASEAN STANDARDS AND QUALITY

43

standards

(Supersedes MS 129 : Part 3 : 1973) MS ISO 6530:2002 Protective clothing – Protection against liquid chemicals – Determination of resistance of materials to penetration by liquids MS ISO 699:2002 Pulps – Determination of alkali resistance (Supersedes MS 129 : Part 4 : 1973) MS 1552:Part 1:2002 Specification for raised access floor system : Part 1 : General requirements MS ISO 777:2002 Paper, board and pulps – Determination of calcium (Supersedes MS 129 : Part 5 : 1973) MS 1552:Part 2:2002 Specification for raised access floor system : Part 2 : Test methods MS ISO 778:2002 Paper, board and pulps – Determination of copper (Supersedes MS 129 : Part 6 : 1973) MS 1553:2002 Code of practice on wind loading for building structure MS 1554:Part 1:2002 Cranes – Vocabulary - Part 1: General MS ISO 15161: 2002 Guidelines on the application of ISO 9001: 2000 for the food and drink industry MS ISO 261: 2002 ISO general purpose metric screw threads – General plan MS IEC 60439-2: 2002 Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways)

MS ISO 262: 2002 ISO general purpose metric screw threads – Selected sizes for screws, bolts and nuts MS IEC 60335-2-24: 2002 Safety of household and similar electrical appliances – Part 224: Particular requirements for refrigerating appliances, icecream appliances and icemakers MS ISO 724: 2002 ISO general purpose metric screw threads – Basic dimensions MS IEC 60423: 2002 Conduits for electrical purposes – Outside diameters of conduits for electrical installations and threads for conduits and fittings MS 1556: 2002 Specification for tableware

ASEAN STANDARDS AND QUALITY

44

MS 1513: Part 4: Sub-Part 2: 2002 Packaging – Transport of dangerous goods: Part 4: Packing and tank provisions: Sub-Part 2: Use of portable tanks and multiple-element gas containers (MEGCs) MS ISO 2507-2: 2002 Thermoplastics pipes and fittings – Vicat softening temperature - Part 2: Test conditions for unplasticised poly(vinyl chloride) (PVC-U) or chlorinated poly (vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes

plastics

MS 1555: 2002 Electromagnetic compatibility (EMC) – Limits – Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A MS 1557: 2002 Specification for plastics lockable containers for household wares MS ISO 68-1: 2002 ISO general purpose metric screw threads – Basic profile – Part 1: Metric screw threads MS 1558: 2002 Specification for plastics food containers with lids MS ISO 9852: 2002 Unplasticised poly(vinyl chloride) (PVC-U) pipes – Dichloromethane resistance at specified temperature (DCMT) – Test method MS 1560: 2002 Specification for measuring cups, spoons and litre measure for domestic purposes MS ISO 2507-1: 2002 Thermoplastics pipes

fittings – Vicat softening temperature – Part 1: General test method

and

MS 1513: Part 2: Sub-Part 2002 Packaging – Transport dangerous goods: Part Classifications: Sub-Part Introduction MS ISO 2505-1: 2002 Thermoplastics pipes Longitudinal reversion–Part Determination methods MS 1513: Part 2: Sub-Part 2002 Packaging – Transport dangerous goods: Part Classifications: Sub-Part Class 1 – Explosives

1: of 2: 1:

– 1: 2: of 2: 2:

MS ISO 2505-2: 2002 Thermoplastics pipes – Longitudinal reversion – Part 2: Determination parameters MS 1513: Part 2: Sub-Part 8: 2002 Packaging – Transport of dangerous goods: Part 2: SubPart 8: Class 8 – Corrosive substances and Class 9 – Miscellaneous dangerous substances and articles MS ISO 1158: 2002 Plastics – Vinyl chloride homopolymers and copolymers – Determination of chlorine content

standards

MS 1513: Part 6: Sub-Part 4: 2002 Packaging – Transport of dangerous goods: Part 6: Requirements for the construction and testing of packagings, intermediate bulk containers (IBCs), large packagings, portable tanks and multiple-element gas containers (MEGCs): Sub-Part 4: Requirements for the design, construction, inspection and testing of portable tanks and multiple-element gas containers (MEGCs) MS ISO 3127: 2002 Thermoplastics pipes – Determination of resistance to external blows – Round-theclock method MS 1561: 2002 Pallets for materials handling – Vocabulary MS ISO 11173: 2002 Thermoplastics pipes – Determination of resistance to external blows – Staircase method MS ISO 8318: 2002 Packaging – Complete, filled transport packages and unit loads – Sinusoidal vibration tests using a variable frequency MS 1559: 2002 Method of test for permeability of thermoplastics containers to packaged reagents or proprietary products MS ISO 2247:2002 Packaging – Complete, filled transport packages and unit loads – Vibration tests at fixed low frequency (Supersedes MS 989 : Part 6 : 1985) MS ISO 2875:2002 Packaging – Complete, filled transport packages and unit loads – Water spray test (Supersedes MS 989 : Part 10 : 1985) MS 1513: Part 5: Sub-part 4:2002

Packaging – Transport of dangerous goods: Part 5: Consignment procedures: SubPart 4: Special provisions MS 1545:2002 Rubber hoses for agricultural spraying MS 1546:2002 Rubber - Determination crystallization effects hardness measurements

of by

REVISION MS 1127:2002 Specification for fresh carambola (Second revision) (Supersedes MS 1127 : 1993) MS 1044:Part 1:2002 Specification for mosquito vapourising mat : Part 1 : Physical and chemical requirements (First Revision) (Supersedes MS 1044 : Part 1 : 1986) MS 1513: Part 5: Sub-part 4:2002 Packaging – Transport of dangerous goods: Part 5: Consignment procedures: SubPart 4: Special provisions MS 1044:Part 2:2002 Specification for mosquito vapourising mat : Part 2 : Method for the evaluation of biological efficacy Glass chamber method (First Revision) (Supersedes MS 1044 : Part 2 : 1986) MS 699:2002 Specification for aluminium sulphate used for potable water supply (First revision) (Supersedes MS 699 : 1981) MS 1326:Part 3:2002 Specification for cockroach bait station : Part 3 : Method for the evaluation of biological efficacy of cockroach bait station (First Revision) (Supersedes MS 1326 : Part 3 : 1993) MS 133:Part F2:2002 Methods of test for paints and

varnishes : Part F2 : Resistance to humidity (Continuous condensation) (First Revision) (Supersedes MS 133 : Part F2 : 1973) MS 75:2002 Specification for anchorages for seat belts (First revision) (Supersedes MS 75 : 1972) MS 1219:Part 2:2002 Safety of household and similar electrical appliances : Part 2 : Particular requirements for fans (First revision) (Supersedes MS 1219 : 1992) MS 654:2002 Specification for reflex reflectors for vehicles, including cycles (First revision) (Supersedes MS 654 : 1980) MS 221:2002 Specification for ISO metric screw threads (First revision) (Supersedes MS 221 : 1974) MS 1184:2002 Code of practice on access for disable persons to public buildings (First revision) (Supersedes MS 1184 : 1991) MS 1315:2002 Performance requirements and tests for office furniture : Storage furniture (First revision) (Supersedes MS 1315 : 1993) MS 795:2002 Specification for WC flushing cisterns and flush pipes (First revision) (Supersedes MS 795 : 1992) MS 1316:2002 Specification for steel filing cabinets (First revision) (Supersedes MS 1316 : 1993) MS 361:2002 Specification for fresh, chilled and frozen poultry (First revision) (Supersedes MS 361 : 1976) MS 1058:Part 1:2002 Specification for polyethylene

ASEAN STANDARDS AND QUALITY

45

standards

(PE) piping systems for water supply : Part 1 : General (Third revision) (Supersedes MS 1058 : Part 1 : 1998) MS 973:2002 Specification for rubber bands (First revision) (Supersedes MS 973 : 1985) MS 1058:Part 2:2002 Specification for polyethylene (PE) piping systems for water supply : Part 2 : Pipes (Third revision) (Supersedes MS 1058 : Part 1 : 1998) MS 1068:2002 Specification for rubber floor mats for vehicles (First revision) (Supersedes MS 1068 : 1987) MS 827:2002 Spark plugs for internal combustion engines (First revision) (Supersedes MS 827 : 1983) MS 671: Part 1:2002 Specification for elastomeric bridge bearings : Part 1 : Material testing, manufacture and installation of bearing (Second revision) (Supersedes MS 671 : Part 1 : 1991) MS 595:Part 1:2002 Specification for safety glass for motor vehicles : Part 1 : General requirements (Second revision) (Supersedes MS 595 : Part 1 : 1989) MS 974:2002 Specification for rubber swimming fins (First revision) (Supersedes MS 974 : 1985) MS 553:2002 Specification for detergent powder for hand wash household laundry (First revision) (Supersedes MS 553 : 1978) MS 1001: 2002 Specification for dried chillies in ground (powdered) form (First revision) (Supersedes MS 1001: 1986)

ASEAN STANDARDS AND QUALITY

46

MS 1063: 2002 Plastics piping systems for soil, ventilation and waste discharge (low and high temperature) within the building structure – Unplasticised poly(vinyl chloride)(PVC-U): Part 1: Specifications for pipes, fittings and the system (First revision) (Supersedes MS 1063: 1986) MS 78: 2002 Method of sampling fresh fruits (First revision) (Supersedes MS 78: 1973)

RECONFIRMATION MS 562 : 1978 Glossary of terms used in the adhesives industry

AMENDMENT Amendment 2 to MS 628: Part 1: 1999 Specification for unplasticised PVC (uPVC) pipes for water supply: Part 1: Pipes (First revision)

PHILIPPINES STANDARDS APPROVED PNS ISO 4:2001 (ISO published 1997) Information and documentation - Rules for the abbreviation of title words and titles of publication PNS ISO 7220:2001 (ISO published 1996) Information and documentation - Presentation of catalogues of standards PNS ISO 5963:2001 (ISO published 1985) Documentation - Methods for

examining documents, determining their subjects, and selecting indexing terms PNS ISO 7275:2001 (ISO published 1985) Documentation - Presentation of title of information of series PNS ISO 9241-2:2002 (ISO published 1992) Ergonomic requirements for office work with visual display terminals (VDTs) – Part 2: Guidance on task requirements PNS ISO 9241-3:2002 (ISO published 1992) Ergonomic requirements for office work with visual display terminals (VDTs) – Part 3: Visual display requirements PNS ISO 9241-5:2002 (ISO published 1998) Ergonomic requirements for office work with visual display terminals (VDTs) – Part 5: Workstation layout and postural requirements PNS ISO 9241-7:2002 (ISO published 1998) Ergonomic requirements for office work with visual display terminals (VDTs) – Part 7: Requirements for display with reflections

PNS ISO 9241-8:2002 (ISO published 1997) Ergonomic requirements for office work with visual display terminals (VDTs) – Part 8: Requirements for displayed colours PNS ISO 9241-10:2002 (ISO published 1996) Ergonomic requirements for office work with visual display terminals (VDTs)–Part 10: Dialogue principles PNS ISO 9241-11:2002 (ISO published 1998) Ergonomic requirements for office work with visual display terminals (VDTs) – Part 11: Guidance on usability

standards

PNS ISO 9241-12:2002 (ISO published 1998) Ergonomic requirements for office work with visual display terminals (VDTs) – Part 12: Presentation of information PNS ISO 9241-13:2002 (ISO published 1998) Ergonomic requirements for office work with visual display terminals (VDTs) – Part 13: User guidance PNS ISO 9241-15:2002 (ISO published 1997) Ergonomic requirements for office work with visual display terminals (VDTs) – Part 15: Command dialogues

PNS IEC 60335-2-6:2000 Amendment 1:2001 (IEC published 1997 Amd. 1:2000) Safety of household and similar electrical appliances Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances PNS IEC 60335-2-25:2000 Amendment 1:2001 (IEC published 1996 Amd. 1:1999) Safety of household and similar electrical appliances Part 2-25: Particular requirements for microwave ovens

PNS ISO 9241-17:2002 (ISO published 1998) Ergonomic requirements for office work with visual display terminals (VDTs) – Part 17: Form filling dialogues

PNS IEC 60335-2-35:2000 Amendment 1:2001 (IEC published 1997 Amd. 1:1999) Safety of household and similar electrical appliances Part 2-35: Particular requirements for instantaneous water heaters

PNS ISO 10075-2:2002 (ISO published 1996) Ergonomic principles related to mental workload – Part 2: Design principles

PNS 254-1:1994 Amendment 2:2001 IDT: IEC 60335-2-3:1993

PNS IEC 315-3:2002 (IEC published 1989 with Amendment 1: 1999) Methods of measurement of radio receivers for various classes of emission - Part 3: Receivers for amplitude modulated sound-broadcasting emissions PNS IEC 60315-4:2002 (IEC published 1997) Methods of measurement of radio receivers for various classes of emission – Part 4: Receivers for frequencymodulated sound broadcasting emissions

Amd. 2:1999 Safety of household and similar electrical appliances Part 2-3: Particular requirements for electric irons PNS 272:1996 Amendment 2:2001 IDT: IEC 60335-2-9:1993 Amd. 2:1999 Safety of household and similar electrical appliances Part 2-6: Particular requirements for grills, toasters and similar portable cooking appliances

PNS 1991:2002 Grey iron pipes for pressure water lines - Specification

PNS IEC 60335-2-4:2001 (IEC published 2000) Safety of household and similar electrical appliances Part 2-4: Particular requirements for spin extractors

PNS IEC 60335-2-21:2001 (IEC published 1997) Safety of household and similar electrical appliances Part 2: Particular requirements for storage water heaters

PNS IEC 60335-2-7:2000 (IEC published 2000) Safety of household and similar electrical appliances Part 2-7: Particular requirements for washing machines

PNS 1079:1994 Amendment 2:2001 IDT: IEC 60335-1:1991 Amd. 2:1999 Safety of household and similar electrical appliances Part 1: General requirements PNS ISO 4427:2002 Polyethylene (PE) pipes for water supply – Specifications PNS 49:2002 Steel bars for concrete reinforcement – Specification PNS 211:2002 Rerolled steel bars for concrete reinforcement – Specification PNS 1152:1993 (ISO 3173:1974) Road vehicles – Apparatus for measurement of the opacity of exhaust gas from the diesel engines operating under steady state conditions PNS 1155:1993 (ISO/TR 4011:1976) Road vehicles – Apparatus for measurement of the opacity of exhaust gas from diesel engines PNS 1159:1993 (ISO 7644:1988) Road vehicles – Measurement of opacity of exhaust gas from compression-ignition (diesel) engines – Lug-down test PNS 1160:1993 (ISO 7645:1988) Road vehicles – Measurement of opacity of exhaust gas from compression-ignition (diesel) engines – Steady single-speed test PNS ISO/IEC 17799:2002 (ISO/IEC published 2000) Information technology – Code of practice for information security management PNS 2004:2002 (BS 7799-2:1999) Information security management – Part 2: Specification for information security management systems

ASEAN STANDARDS AND QUALITY

47

standards

PNS ISO 2230:2002 (ISO published 2002) Rubber products – Guidelines for storage PNS ISO 11425:2002 (ISO published 1996) Rubber hoses and hose assemblies for automotive power-steering systems – Specification PNS ISO 6142:2001 Gas analysis – Preparation of calibration gas mixtures – Gravimetric method PNS ISO 6143:2001 Gas analysis – Comparison methods for determining and checking the composition of calibration gas mixtures PNS ISO 6145-2:2001 Gas analysis – Preparation of calibration gas mixtures using dynamic volumetric methods – Part 2: volumetric pumps PNS ISO 6145-5:2001 Gas analysis – Preparation of calibration gas mixtures using dynamic volumetric methods – Part 5: Capillary calibration devices PNS ISO 6145-7:2001 Gas analysis – Preparation of calibration gas mixtures using dynamic volumetric methods – Part 7: Thermal mass-flow controllers PNS ISO 6145-9:2001 Gas analysis – Preparation of calibration gas mixtures using dynamic volumetric methods – Part 9: Saturation method PNS IEC 60050-101:2002 (IEC published 1998) International Electrotechnical Vocabulary – Part 101: Mathematics PNS IEC 60050-131:2002 (IEC published 2002) International Electrotechnical Vocabulary – Part 131: Circuit theory PNS IEC 60050-151:2002 (IEC published 2001) International Electrotechnical

ASEAN STANDARDS AND QUALITY

48

Vocabulary – Part 151: Electrical and magnetic devices PNS IEC 60050-351:2002 (IEC published 1998) International Electrotechnical Vocabulary – Part 351: Automatic control

PNS CODEX STAN 182:2002 (CAC published 1993/Rev. 1: 1999) Standards for pineapples PNS CODEX STAN 42:2002 (CAC published 1981) Standards for canned pineapples

PNS IEC 60050-444:2002 (IEC published 2002) International Electrotechnical Vocabulary – Part 444: Elementary relays

PNS ISO 18115:2002 (ISO published 2001) Surface chemical analysis Vocabulary

PNS IEC 60050-445:2002 (IEC published 2002) International Electrotechnical Vocabulary – Part 445: Specified time all-or-nothing relays

PNS ISO/TR 15969:2002 (ISO/TR published 2001) Surface chemical analysis – Depth profiling – Measurement of sputtered depth

PNS IEC 60050-521:2002 (IEC published 2002) International Electrotechnical Vocabulary – Part 521: Semiconductor devices and integrated circuits PNS IEC 60050-551-20:2002 (IEC published 2001) International Electrotechnical Vocabulary – Part 551: Power Electronics – Harmonic analysis PNS IEC 60050-815:2002 (IEC published 2000) International Electrotechnical Vocabulary – Part 815: Superconductivity PNS IEC 60050-121:2002 (IEC published 1998 with Amendment1: 2002) International Electrotechnical Vocabulary – Part 121: Electromagnetism PNS 128:2002 Amendment 1:2002 Fiberglass pressure pipe for water supply - Specifications PNS 1992:2002 Ductile iron pipes for pressurized water lines Specification PNS CODEX STAN 85:2002 (CAC published 1981) Standards for pineapple juice preserved exclusively by physical means

–

PNS ISO/IEC Guide 50:2002 (ISO/IEC published 2002) Safety aspects – Guidelines for child safety PNS ISO/IEC Guide 71:2002 (ISO/IEC published 2001) Guidelines for standards developers to address the needs of older persons and persons with disabilities PNS ISO 7504:2002 (ISO published 2001) Gas analysis – Vocabulary PNS ISO 13731:2002 (ISO published 2001) Ergonomics of the thermal environment – Vocabulary and symbols PNS ISO 11323:2002 (ISO published 2002) Iron ore and direct reduced iron - Vocabulary PNS IEC 60432-1:2001 (IEC published 1999) Incandescent lamps – Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes PNS 603-1:1993 Amendment 1:2001 (IEC 60968: 1998 Amd. 2:1999) Self ballasted lamps for general lighting services – Safety requirements

standards

PNS 603-2:1993 Amendment 1:2001 Self ballasted lamps for general lighting services – Performance requirements PNS 255:1996 Amendment 1:2001 (IEC 60335-2-15:1995 Amendment 1: 1999) Safety of household and similar electrical appliances Part 2-15 : Particular requirements for hearing liquids PNS 225-2:1996 Amendment 2:2001 Safety of household and similar electrical appliances Part 2-15: Particular requirements for hearing liquids PNS 1079-2-23:1998 Amendment 1:2001 (IEC 335-2-23:1996 Amendment 1: 2001) Safety of household and similar electrical appliances Part 2-23: Particular requirements for skin or hair care PNS IEC 60335-2-11:2001 (IEC published 2000) Safety of household and similar electrical appliances Part 2-11: Particular requirements for tumble dryers PNS IEC 60335-2-21:2001 Amendment 1:2001 (IEC published 1997 Amd. 1:1999) Safety of household and similar electrical appliances Part 2-21: Particular requirements for storage water heaters

stationary cooking hobs, ovens and appliances

ranges, similar

PNS IEC 60335-2-25:2000 Amendment 1:2001 (IEC published 1996 Amd. 1:1999) Safety of household and similar electrical appliances Part 2-25: Particular requirements for microwave ovens PNS IEC 60335-2-35:2000 Amendment 1:2001 (IEC published 1997 Amd. 1:1999) Safety of household and similar electrical appliances Part 2-35: Particular requirements for instantaneous water heaters PNS 254-1:1994 Amendment 2:2001 (IDT: IEC 60335-2-3:1993 Amd. 2:1999) Safety of household and similar electrical appliances Part 2-3: Particular requirements for electric irons PNS 272:1996 Amendment 2:2001 (IDT: IEC 60335-2-9:1993 Amd. 2:1999) Safety of household and similar electrical appliances Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances PNS IEC 60335-2-5:2001 (IEC published 2000) Safety of household and similar electrical appliances Part 2-5: Particular requirements for dishwashers

PNS IEC 60335-2-21:2001 (IEC published 1997) Safety of household and similar electrical appliances Part 2: Particular requirements for storage water heaters

PNS IEC 60335-2-24:2001 (IEC published 2000) Safety of household and similar electrical appliances Part 2-24: Particular requirements for refrigerating appliances, ice cream appliances and icemakers

PNS IEC 60335-2-6:2000 Amendment 1:2001 (IEC published 1997 Amd. 1:2000) Safety of household and similar electrical appliances Part 2-6: Particular requirements for

PNS IEC 60335-2-34:2001 (IEC published 1999) Safety of household and similar electrical appliances Part 2-34: Particular requirements for motor compressors

PNS IEC 335-2-40:2000 Amendment 1:2001 (IEC published 1995 Amd. 1:2000) Safety of household and similar electrical appliances Part 2-40: Particular requirements for electrical heat pumps, air conditioners and dehumidifiers PNS 1169:1993 Amendment 2:2001 (IEC 60335-2-2: 1993 Amd. 2:1999) Safety of household and similar electrical appliances Part 2-2: Particular requirements for vacuum cleaners and water suction cleaning appliances PNS IEC 335-2-32:2000 Amendment 1:2001 (IEC published 1993 Amd. 1:1999) Safety of household and similar electrical appliances Part 2-32: Particular requirements for massage appliances PNS 1079-2-59:1998 Amendment 1:2001 (IEC 60335-2-59: 1997 Amd. 1:2000) Safety of household and similar electrical appliances Part 2-59: Particular requirements for insect killers PNS IEC 60335-2-4:2001 (IEC published 2000) Safety of household and similar electrical appliances Part 2-4: Particular requirements for spin extractors PNS IEC 60335-2-7:2001 (IEC published 2000) Safety of household and similar electrical appliances Part 2-7: Particular requirements for washing machines PNS 1079:1994 Amendment 2:2001 (IDT: IEC 60335-1:1991 Amd. 2:1999) Safety of household and similar electrical appliances Part 1: General requirements PNS ISO/IEC Guide 7:1994 Guidelines for drafting of standards suitable for use for

ASEAN STANDARDS AND QUALITY

49

standards

conformity assessment PNS ISO/IEC Guide 14:1977 Product information for consumer

PNS ISO/IEC Guide 73:2002 Risk management – Vocabulary – Guidelines for use in standards

PNS ISO/IEC Guide 22:1996 General criteria for supplier’s declaration of conformity PNS ISO/IEC Guide 23:1982 Methods of indicating conformity with standards for third-party certification systems

PNS IEC 60107-2:2002 (IEC published 1997) Methods of measurement on receivers for television broadcast transmissions – Part 2: Audio channels – General method and methods for monophonic channels

PNS ISO Guide 27:1983 Guidelines for corrective action to be taken by a certification body in the event of misuse if its mark of conformity

SINGAPORE

PNS ISO/IEC Guide 28:1982 General rules for a model thirdparty certification system for products PNS ISO Guide 31:2000 Reference materials – Contents of certificates and labels PNS ISO Guide 47:1986 Presentations of translations of ISO publications PNS ISO/IEC Guide 51:1999 Safety aspects – Guidelines for their inclusion in standards PNS ISO/IEC Guide 53:1988 An approach to the utilization of a supplier’s quality system in third party product certification PNS ISO/IEC Guide 60:1994 ISO/IEC Code of good practice for conformity assessment PNS ISO/IEC Guide 63:1994 Guide to the development and inclusion of safety aspects in International Standards for medical devices PNS ISO Guide 69:1999 Harmonized Stage Code system (Edition 2) – Principles and guidelines for use PNS ISO Guide 72:2001 Guidelines for the justification and development of management system standards

ASEAN STANDARDS AND QUALITY

50

SS 467 : 2002 Specification for smart card reader application program interface (API) CP 11:2002 Code of practice for demolition

STANDARDS APPROVED

SS 498 Specification for hot-applied thermoplastic road marking materials and

Part 2 : 2002 Road performance Part 3 : 2002 Application of material to road surfaces CP 93 : 2002 Code of practice for classification of construction resources information (Adaptation of CSI/CSC Masterformat : Master list of numbers and titles for the construction industry, 1995 edition, published by The Construction Specifications Institute, USA) CP 94 : 2002 Code of practice for installation for clay roofing tiles CP 95 : 2002 Code of practice for cold chain management – Milk and dairy products CP 96 : 2002

REVISION

THAILAND

STANDARDS APPROVED

Part 1 : 2002 Constituent materials mixtures

Code of practice for curtain walls

TIS 686-2542(1999) Plastics Containers Ophthalmics

for

TIS 768-2544(2001) Axial Flow Rice Threshers TIS 1672-2541(1998) Nitric Acid for Industrial Use Determination of Chloride Ions Content-Potentiometric Method TIS 1673-2541(1998) Caprolactam for Industrial UseDetermination of Volatile Bases Content-Titrimetric Method After Distillation TIS 1674-2541(1998) Caprolactam for Indutrial Use Determination of Permanganate Index-Spectrometric Method TIS 1675-2541(1998) Caprolactam for Industrial UseDetermination of Colour of 50% Aqueous Caprolactam Solution, Expressed in Hazen Units (Platinum-Cobalt Scale) Spectrometric Method

TIS 1683-2541(1998) Implants for Surgery Determination of Bending Strength and Stiffness of Bone

standards

Plates TIS 1684-2541(1998) Implant for Surgery-Guidance on Care and Handling of Orhopaedic Implants TIS 1690 Part 1-2541(1998) Phthalic Anhydride for Industrial Use-Methods of Test Part 1 : General TIS 1690 Part 2-2541(1998) Phthalic Anhydride for Industrial Use-Methods of Test Part 2 : Measurement of the Molten Material TIS 1690 Part 3-2541(1998) Phthalic Anhydride for Industrial Use-Methods of Test Part 3 : Measurement of Colour Stability TIS 1690 Part 4-2541(1998) Phthalic Anhydride for Industrial Use-Methods of Test Part 4 : Measurement of Colour after Treatment with Sulphulic Acid TIS 1690 Part 5-2541(1998) Phthalic Anhydride for Industrial Use-Methods of Test Part 5 : Determination of Free AcidityPotentiometric Method TIS 1690 Part 6-2541(1998) Phthalic Anhydride for Industrial Use-Methods of Test Part 6 : Determination of Phthalic Anhydride Content Titrimetric Method

Rubber Compounding Ingredients CarbonblackDetermination of Dibutyl Phthalate Absorption NumberPart 1 : Method Using Absorptometer TIS 1709-2541(1998) Rubber Compounding Ingredients Carbonblack Preparation of Samples for Determination of Dibutyl Phthalate Absorption Number (Compressed Sample) TIS 1710 Part 1-2541(1998) Rubber Compounding Ingredients Carbonblack Determination of Specific Surface Area by Nitrogen Adsorption Methods Part 1 : Single-Point Procedures TIS 1710 Part 2-2541(1998) Rubber Compounding Ingredients CarbonblackDetermination of Specific Surface Area by Nitrogen Adsorption Methods Part 2 : Multipoint Bet Procedures TIS 1711-2541(1998) Rubber Compounding Ingredients Carbonblack Determination of Tinting Strength TIS 1712-2541(1998) Rubber Compound Ingredients Carbonblack (Pelletized) Determination of Pour Density

Agents-Determination of Sulphated Ash-Gravimatric Method TIS 1765-2542(1999) Anionic and Non-Ionic Surface Tension with Aplate Stirrup or Ring TIS 1766-2542(1999) Anionic Surface Active AgentsDetermination of Solubility in Water TIS 1767-2542(1999) Benzyl Chloride for Industrial Use-Methods of Test TIS 1768-2542(1999) Phosphoric Acid for Industrial Use-Determination of Arsenic Content-Silver Diethyldithiocarbamate Photometric Method TIS 1769-2542(1999) Phosphoric Acid for Industrial Use-Determination of Soluble Silica Content-Reduced Molybdosilicate Spectrophotometric Method TIS 1779-2542(1999) Ultramarine Pigments for Paints TIS 1780 Part 10-2542(1999) General Methods of Test for Pigments and Extenders-Part10: Determination of Density Pyknometer Method

TIS 1690 Part 7-2541(1998) Phthalic Anhydride for Industrial Use-Methods of Test Part 7 : Determination of Maleic Anhydride Content -Polarographic Method

TIS 1762 Part 1-2542 Surface Active AgentsDetergents-Determination of Cationic-Active Matter Content Part 1 : High-Molecular-Mass Cationic-Active Matter

TIS 1780 Part 11-2542(1999) General Methods of Test for Pigments and Extenders-Part11: Determination of Tamped Volume and Apparent Density after Tamping

TIS 1704-2541(1998) Plastics-Phenolic Moulding Materials - Specification

TIS 1762 Part 2-2542 Surface Active AgentsDetergents-Determination of Cationic-Active Matter Content Part 2 : Cationic-Active Matter of Low Molecularmass (between 200 and 500)

TIS 2060-2543(2000) Hot - Rolled Carbon Steel Coil Strip Plate and Sheet for Gas Cylinders

TIS 1763-2542 (1999) Non-Ionic Surface Active Agents-Determination of Cloud Point Index-Volumetric Method

TIS 2079-2544(2001) Makrut Leaves Oil

TIS 1706-2541(1998) Plastic-Melamine/Phenolic Moulding MaterialsSpecification TIS 1707-2541(1998) Rubber Compounding Ingredients CarbonblackDetermination of Iodine Adsorption Number Titrimetric Method TIS 1708-2541(1998)

TIS 1764-2542(1999) Non-Ionic Surface

TIS 2078-2544(2001) Makrut Peel Oil

TIS 2080-2544(2001) Basil Oil, Thai Type

Active

ASEAN STANDARDS AND QUALITY

51

standards

TCVN 7019:2002 (ISO 11738:2000) Agricultural irrigation equipment. Control heads

STANDARDS WITHDRAWN TIS 686-2530(1987) Plastics Containers Ophthalmics (replaced by TIS 2542(1999)) Plastics Containers Ophthalmics TIS 768-2531(1988) Axial Flow Rice Threshers (replaced by TIS 2544(2001)) Axial Flow Rice Threshers

for 686for

768-

VIETNAM STANDARDS APPROVED TCVN 7015-1:2002 (ISO 11680-1:2000) Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners. Part 1: Units fitted with an integral combustion engine TCVN 7015-2:2002 (ISO 11680-2:2000) Machinery for forestry. Safety requirements and testing for pole-mounted powered pruners. Part 2: Units for use with a back-pack power source TCVN 7016:2002 (ISO 13860:2000) Machinery for forestry. Forwarders. Terms, definitions and commercial specifications TCVN 7017:2002 (ISO 13861:2000) Machinery for forestry. Wheeled skidders. Terms, definitions and commercial specifications TCVN 7018:2002 (ISO 13862:2000) Machinery for forestry. Fellerbunchers. Terms, definitions and commercial specifications

ASEAN STANDARDS AND QUALITY

52

TCVN 7020:2002 (ISO 11684:1995) Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Safety signs and hazard pictorials. General principles

TCVN 7057-2:2002 (ISO 4249-2:1990) Road vehicles. Motorcycle tyres and rims (code designated series). Part 2: Tyre load ratings TCVN 7057-3:2002 (ISO 4249-3:1997) Road vehicles. Motorcycle tyres and rims (code designated series). Part 3: Rims

TCVN 7021:2002 (ISO 3971:1977) Rice milling. Symbols and equivalent terms

TCVN 7058:2002 (ISO 10190:1992) Road vehicles. Motorcycle chains. Characteristics and test methods

TCVN 7026:2002 (ISO 7165:1999) Fire fighting. Portable fire extinguishers. Performance and construction

TCVN 7059:2002 (ISO 9129:1988) Road vehicles. Motorcycles. Measurement methods for moments of inertia

TCVN 7027:2002 (ISO 11601:1999) Fire fighting. Wheeled fire extinguishers. Performance and construction TCVN 7051:2002 (ISO 11118:1999) Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods TCVN 7052-1:2002 (ISO 3087-1:2002) Cylinders for acetylene. Basic requirements. Part 1: Cylinders without fusible plugs TCVN 7052-2:2002 (ISO 3087-2:2000) Cylinders for acetylene. Basic requirements. Part 2: Cylinders with fusible plugs TCVN 7053:2002 Portable cookers attached to liquefied petroleum gas cylinder TCVN 7056:2002 (ISO 7118:1981) Road vehicles. Motorcycles. Mounting of rear shock absorbers TCVN 7057-1:2002 (ISO 4249-1:1985) Road vehicles. Motorcycle tyres and rims (code designated series). Part 1: Tyres

TCVN 7060:2002 (ISO 9130:1989) Road vehicles. Motorcycles. Measurement methods for location of centre of gravity TCVN 7062:2002 Cement sack paper TCVN 7063:2002 Wrapping paper TCVN 7064:2002 Toilet tissue paper TCVN 7065:2002 Paper napkins TCVN 7066:2002 Paper, board and pulp. Determination of pH of aqueous extracts TCVN 7067:2002 Paper, board and pulp. Determination of copper number TCVN 7068-1:2002 Paper and board. Accelerated aging. Part 1: Dry heat treatment TCVN 7069:2002 Paper and board. Determination of starch

standards

TCVN 7070:2002 Paper. Measurement dimensional change immersion in water

of after

TCVN 7071:2002 Pulp. Determination of alpha-, beta-, and gamma-cellulose TCVN 7072:2002 Pulp. Determination of limiting viscosity number in cupric ethylene diamine (CED)solution TCVN 7133:2002 Ceramic floor and wall group BIIb (6 percent E

tile,

TCVN 7134:2002 Ceramic floor and wall tiles, group BIII (E 10 percent). Specification

ASEAN STANDARDS AND QUALITY

53