SpeedSurf 504AN Bridge Mode

PLDT Wifi Router bridge mode setup Advanced->WAN Setup->WAN Settings Select Connection Change Channel Mode to 1483 Bridged Modify Save Advanced->LAN Setup->DHCP Settings Set DHCP Mode to None Apply Changes Save Advanced->Router Features->Routing Apply Changes Uncheck Enable checkbox Save ipconfig /release ipconfig /renew release and renew to check if it works. :D Sky Broadband Router Bridge mode setup Click Administration at the top of the page. Change the Working Mode drop down from Router Mode to Bridged Only. Click Save Settings and the gateway will restart. Once the modem is online, plug a device into port one to test their connectivity . While in bridged mode, only port one will be active on the gateway. Note: If you want to put the modem back into gateway mode, factory reset the modem by pressing the reset button on the back for more than 10 seconds. Note: the LAN interface type for the PLDT DSL should be set to PPPoE. Provide th e username and password. :)