Side Pocket Mandrel

 

Side Pocket Mandrel & Valves The Side Pocket Mandrels are primarily designed for gas lift applications and provide full opening tubing bore allowing normal wireline operations while receiving rec eiving any manufacturer’s 1.0” 1.0” or 1 ½” outside diameter gas lift valves. Tejas Side Pocket Mandrels have a positioning orienting sleeve sle eve to guide the Kick-over Tool Tool into precise alignment with the side pocket. The slot in the orienting and tool guard guide the valve until it latches in place.  All materials are procured to ASTM standards. Available Available materials are: AISI 4130, 13CR, S13CR, 9CR-MO, Inconel 718, or Incoloy 925. Smart design for use with a top BK-2 latch and bottom collet latch, and can be run in highly deviated wells as well as dual completions. The Mandrels feature a side pocket prole to receive gas lift valves, chemical injection valves, dummy valves, circulating valves, dump kill and shear orice valves. Different porting congurations on the side pocket are available for casing ow ow,,

 

FO-1

MO-1

MO-1-CI

HO-1

Chamber lift and water ood. Examples  •

FO-1 Oval Side Picket Mandrel Featuring a forged pocket and tool guard, orienting for 1” outside diameter valves used in casing to tubing ow.

 •

MO-1 Oval Side Pocket Mandrel featuring a machined style pocket and tool guard, orienting for 1” outside diameter valves used in casing to tubing ow.

 •

MO-1-CI Oval Side Pocket Mandrel using machined pocket and tool guard, orienting for 1” outside diameter chemical injection valve.

 •

HO-2 Round High Pressure Mandrel, orienting for 1 ½” outside diameter valves used in casing to tubing ow.

 •

BRO-SL Round high pressure providing a milled slot along the body for control line by pass.

Tejas Completion Solutions is the leading provider of engineered completion products and services, all of which have earned a reputation for rugged reliability and are designed to function in a variety of oil & gas environments.

Page 1

 

Selection of Side Pocket Mandrels Each Side Pocket Mandrel is indicated by a letter representing its primary model features: Symbol M

Description Oval mandrel using a machined style pocket and deector guard.

F  

Oval mandrel using a forged style pocket and deector guard.

O

Orienting mandrel

U

Special clearance mandrel with a reduced outside diameter.

-1  

Uses a 1” outside diameter ow control valve.

-2  

Uses a 1 ½” outside diameter ow control valve.

R  

Round mandrel mainly used for increased pressures.

Symbol BR

Description Round mandrel manufacture manufactured d from solid bar material mainly utilized on highpressure applications and when long operating life is desired.

H

Round high-pres high-pressure sure mandrel utilized in high-pressure applications.

SC

Special clearanc clearance e mandrel with reduced outside diameter for a medium to highpressure application.

EC  

Mandrel is ported to ow from tubing to casing.

E

Mandrel is ported to ow casing to tubing and exhaust through an external pipe for chamber lift installatio installation. n.

CI

Chemical injection mandrel

WF

Water ood.

Note: All rounded mandrels are available in solid body construction designated as BRO-1/BRO-2

Page 2

 

Gas Lift Valves The Tejas Merla line of gas lift valves consists of casing pressure and tubing pressureoperated types for use in continuous and/  or intermittent ow gas lift production. Each valve is modularly constructed c onstructed using 316 stainless and monel materials.

 

The Tejas line of valves includes:  •

Production pressure operated gas lift valves

 •

Injection pressure operated gas lift valves

 •

Orice valves

 •

Chemical Injection valves

 •

Double back check valves

 •

Dummy valves

 •

Latches.

Latch

Dummy Valve

Injection Pressure Operated Valve

Page 3