SETUP

PT-200 Programming Software

Presented by: SMT Indian engg

Contents \ue000 Power \ue000 Air

Supply

Supply

\ue000 LAN

Setup

\ue000 PATLITE

Setup

Power Supply \ue000 Supply

Power:

200VAC \u00b1 10V or 400VAC \u00b1 10V

\ue000

\ue000 Frequency: \ue000

50/60 Hz \u00b1 5%

\ue000 Rated \ue000

Capacity:

2.5 kVA

Power Supply Installation Procedure:

Open the panel on the right side of the machine Pass the cable through the cable clamp and secure it by rotating clockwise Connect the cable with the main power terminal Connecting pin: Weidmuller H4/20D or H6/20 Connection order: PEL1L2L3 Tightening torque: 0.8~1.6 Nm

Air Supply Supply compressed air to A (in diagram) Air pressure: 0.49~0.78MPa Adjust to: 0.49~0.54MPa using the regulator Air supply: Min. 150L/min (8L/min more for every bulk feeder)

LAN Setup

LAN Setup Connect Ethernet cable to HUB in the machine and with the line computer (PT installed)

PATLITE Setup Insert the plug into the socket on the main machine and fix it with a clasp