Self-Paced Lesson IGP Routing Protocols Datasheet

Cisco 360 Learning Program for CCIE Routing and Switching

Self-Paced Lesson: IGP Routing Protocols Datasheet The centerpiece of this Lesson Module is the Interior Gateway Protocol (IGP) Routing Protocols video on demand (VoD) instruction. The split-screen format of each VoD module provides the powerful learning experience of shadowing a Cisco CCIE® who is configuring and explaining IGP Routing Protocols.

Duration: Seven Hours Each VoD is approximately 15–30 minutes in length, and the approximately seven hours of VoD modules are grouped into five blocks. A set of supporting “Spot the Issues” soft assessment quizzes are included in each block. In addition, two hands-on, technology-focused practice labs on the subject of the IGP Routing Protocols are available in this Lesson Module.

Target Audience The IGP Routing Protocols lesson is for professional-level networking engineers who have 3–5 years of network engineering experience or who have completed the Cisco CCNP® certification. This self-paced Lesson Module is for engineers who need to master CCIE-level problems that involve: ƒ

Open Shortest Path First (OSPF)

ƒ

Enhanced Interior Gateway Routing Protocol (EIGRP)

ƒ

RIPv2

ƒ

Redistribution

All contents are Copyright © 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

Page 1 of 3

Cisco 360 Learning Program for CCIE Routing and Switching

Recommended Prerequisites and Corequisites A CCNP level of understanding of the IGP Routing Protocols, as well as the ability to perform primary route redistribution tasks and the configuration basics that are needed to implement IGP protocols are required. It is also recommended that this lesson be completed with these lessons: ƒ

CCIE R&S Lesson: Data Link Layer Technologies

ƒ

CCIE R&S Lesson: Frame Relay

ƒ

CCIE R&S Lesson: BGP Routing Protocols

Lesson Module Objectives Upon completion of this self-paced Lesson Module, learners should be able to formulate well-defined mental simulations to perform the following IGP Routing Protocol tasks with the minimally described parameters that are commonly found in CCIElevel tasks. ƒ

Formulate an end-to-end opening moves strategy for route redistribution

ƒ

Configure OSPF

ƒ

Configure EIGRP

ƒ

Configure RIPv2

ƒ

Configure route redistribution

Lesson Module Outline The VoDs in this Lesson Module discuss these topics: Block 1: Opening Moves and Introduction to IGPs

Block 3: EIGRP

ƒ

Formulating an Opening Moves Strategy

ƒ

EIGRP Enabling Moves

ƒ

Opening Moves for IGPs

ƒ

EIGRP Metrics and Variance

ƒ

Opening Moves for Redistribution

ƒ

EIGRP Query Control

ƒ

Creating a Task-Tracking Worksheet

ƒ

EIGRP Summarization

ƒ

Introduction to IGPs

ƒ

EIGRP Authentication

Block 2: OSPF

Block 4: RIPv2

ƒ

OSPF Enabling Moves Part 1

ƒ

RIPv2 Enabling Commands

ƒ

OSPF Enabling Moves Part 2

ƒ

RIPv2 Enhanced Features

ƒ

OSPF Network Types Part 1

ƒ

RIPv2 Filtering Updates

ƒ

OSPF Network Types Part 2

ƒ

RIPv2 Authentication

ƒ

OSPF Metrics

Block 5: Redistribution

ƒ

OSPF Authentication

ƒ

Redistribution Basics

ƒ

OSPF Summarization and Default Routes

ƒ

Advanced Redistribution

ƒ

OSPF Special Area Types

ƒ

Controlling Redistribution

All contents are Copyright © 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

Page 2 of 3

Cisco 360 Learning Program for CCIE Routing and Switching

Lab Outline This Lesson Module contains two hands-on labs that focus on the IGP Routing Protocols topics in the VoDs. Learners must supply the lab equipment that is required to run the labs. Each of these hands-on, technology-focused scenarios consists of: ƒ

A scenario written with CCIE-level configuration tasks

ƒ

A detailed Answer Key

ƒ

The web-based and highly interactive Mentor Guide

Lab Topology The following minimal topology is required to perform the IGP Routing Protocols Lesson Module labs.

For More Information For more information about Cisco 360 Learning Program for CCIE Routing and Switching, go to www.cisco.com/go/360. The Cisco 360 Learning Program for CCIE Routing and Switching Learning Portal is available at http://cisco360.cisco.com.

Printed in USA

All contents are Copyright © 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

05/09

Page 3 of 3