Sap Pm End User Manual Breakdown Maintenance
March 15, 2017 | Author: Mike Tan | Category: N/A
Short Description
Download Sap Pm End User Manual Breakdown Maintenance...
Description
TRF/EPM/3.0
!!"
#$!!
End User Training Manual for SAP PM – Plant Maintenance
Process Name: Break down Maintenance
Process No: TRF/EPM/3.0
Control Copy No: TRF/EPM/3.0/
%& Doc Version
00
' %
Description
Prepared by
Date
Original
Palani Dorai
18.12.2009
Reviewed by
Approved by
Project: MISSION SURE
Introduction Enterprise Plant Maintenance process in TRF has the following business processes. $
$
(
$ Preventive Maintenance process Equipment Calibration processes
!
!
Unplanned / Breakdown Maintenance processes
"
"
External services processes
#
#
Reconditioning / Shutdown processes.
For each of the above processes, there are separate End User Training Manuals are available This document covers sl. No. 3. Of the above list, that is Unplanned / Breakdown Maintenance Process.
This End User Training manual on Unplanned / Breakdown Maintenance Process consists of the following sequence of sub-processes
1. 2. 3. 4. 5. 6. 7.
Creation of Notifications – transaction Code IW21 Changing the PM Notifications – Transaction Code IW22 Create Breakdown maintenance Order for Notification – Transaction code IW34 Changing the maintenance Order – Transaction Code IW32 PM Order Confirmation – Transaction code IW44 Change PM Notification – Transaction Code IW22 Change Order – Transaction Code IW32
TRF/EPM3.0 Page 2 of 48
!!"
#$!!
Project: MISSION SURE
1. Create Notification - Transaction code IW21 Procedural Steps
Purpose •
Creating Notifications
Transaction Code IW21
Navigation: SAP Easy Access > Logistics > Plant maintenance > Maintenance Processing > Notification > IW21 – Create (General)
Procedure Enter the Transaction code IW21 in the command field as shown in the screen below
Or go as per the navigation shown below and click IW21 – Create (General)
TRF/EPM3.0 Page 3 of 48
!!"
#$!!
Project: MISSION SURE
Press or click on the check mark
icon in the top left side corner of the
Screen, the following screen will appear
TRF/EPM3.0 Page 4 of 48
!!"
#$!!
Project: MISSION SURE
In the above screen, click on the Notification Type field, a drop down icon appears at the end of the field, and click on this field to get the drop down list (see below screen)
And select and double click on the Notification Type “M2”, to get it populated on the screen. TRF/EPM3.0 Page 5 of 48
!!"
#$!!
Project: MISSION SURE The notification is used, for external number assignment. Since system is configured for Internal Notification Number assignment, Do not enter any data in this field. The Reference – Notification field is used, when we like to create a Notification, by copying the details of an already created Notification. Do not enter any data in this field.
Click on the check mark
icon, the following screen appears.
Key-in the descriptio n
a) Key-in the description of Notification button will appear at the end
b) Click on the Functional Loc field, a drop down icon of the field, and click this
icon to get the following drop down menu (as shown below)
TRF/EPM3.0 Page 6 of 48
!!"
#$!!
Project: MISSION SURE
Click on the check mark appears.
button of the above pop up window, the following screen
Select (click once) the required location and click on the check mark populate the value in to the field.
button, to
c) Similarly, get the drop down list for the equipment (as shown below) for the Equipment field Note: while searching for the Equipment No, select the “ Equipment by technical ID tab in the followings earch
number” window.
TRF/EPM3.0 Page 7 of 48
!!"
#$!!
Project: MISSION SURE
Click on the check mark appears.
button of the above pop up window, the following screen
Select (click once) the required equipment Number and click on the check mark button, to populate the value in to the field. d) get the drop down list for the Planner group field, as shown below
TRF/EPM3.0 Page 8 of 48
!!"
#$!!
Project: MISSION SURE In the above screen, select (click once on the line) the required group, and click on the check mark
button to populate the value on the field.
e) Similarly get the drop down list and populate the value on to the Main WorkCtr. field. f) Similarly get the drop down list and populate the value of the Person respons. Field g) Similarly get the drop down list and populate the value of the Reported by field h) Also if required, enter textual matter in the Subject Long Text field After populating all the above values, the screen will look as shown below.
TRF/EPM3.0 Page 9 of 48
!!"
#$!!
Project: MISSION SURE
Click the check mark long Text field)
Click the save screen
button to save the record. (Note the change in the Subject
button to save the record., the system returns back to the following
TRF/EPM3.0 Page 10 of 48
!!"
#$!!
Project: MISSION SURE
With the following message at the status line
Note: Note Down the Notification Number for future reference
End of document on T-code IW21
TRF/EPM3.0 Page 11 of 48
!!"
#$!!
Project: MISSION SURE
2. Changing the Pm Notification - Transaction code IW22 Procedural Steps
Purpose •
Changing the Notifications
Transaction Code IW22
Navigation: SAP Easy Access > Logistics > Plant maintenance > Maintenance Processing > Notification > IW22 – Change
Procedure Enter the Transaction code IW22 in the command field as shown in the screen below
Or go as per the navigation shown below and click IW22 - Change
TRF/EPM3.0 Page 12 of 48
!!"
#$!!
Project: MISSION SURE
Press or click on the check mark
icon in the top left side corner of the
Screen, the following screen will appear Key-in the Notification number in the Notification field (refer screen below)
TRF/EPM3.0 Page 13 of 48
!!"
#$!!
Project: MISSION SURE
Click the check mark
button to get the next screen, as shown below
TRF/EPM3.0 Page 14 of 48
!!"
#$!!
Project: MISSION SURE Scroll down (as shown below) to enter the Cause details in the screen.
Click on the drop down
cause code field to get the drop down
button, and then click on this
button to get the following drop down list
TRF/EPM3.0 Page 15 of 48
!!"
#$!!
Project: MISSION SURE
Expand the right side arrow below
button of the MECH cause; the screen will look as
Select (click once on the line) the required line and press the choose button. The value will get populated in to the cause Code field. Key-in the Cause text as required. The screen will look as below
TRF/EPM3.0 Page 16 of 48
!!"
#$!!
push
Project: MISSION SURE
Click on the put in process
button,
And
Click the save screen
button to save the record. The system returns back to the following
With the following message at the status line
End of documentation on T-code IW22
TRF/EPM3.0 Page 17 of 48
!!"
#$!!
Project: MISSION SURE
3. Create Breakdown maintenance order for notification – Transaction Code IW34 Procedural Steps
Purpose Creating Breakdown maintenance order for notification
Transaction Code IW34
Navigation: SAP Easy Access > Logistics > Plant maintenance > Maintenance Processing > Order > Create (Special) > IW34 – Order the Notification
Procedure Enter the Transaction code IW34 in the command field as shown in the screen below
Or go as per the navigation shown below and click IW34 – Order for Notification
TRF/EPM3.0 Page 18 of 48
!!"
#$!!
Project: MISSION SURE
icon in the top left side corner of the
Press or click on the check mark Screen, the following screen will appear
Key-in the Notification number in the Notification field (refer screen below)
TRF/EPM3.0 Page 19 of 48
!!"
#$!!
Project: MISSION SURE
Click on the drop down
button of the Order type, the following drop down list appears
TRF/EPM3.0 Page 20 of 48
!!"
#$!!
Project: MISSION SURE
Select (click once on the line) “PM02 – Breakdown Maintenance Order” (refer above screen) , and click on the check mark button to get the value populated in the Order Type field. The screen will look as shown below.
Do not key-in any value in any of the other fields.
Click the check mark
button, the following screen appears
TRF/EPM3.0 Page 21 of 48
!!"
#$!!
Project: MISSION SURE
Click on the Operation tab, to key-in the operation details that are to be done for this notification, the following screen appears
TRF/EPM3.0 Page 22 of 48
!!"
#$!!
Project: MISSION SURE Add the operation “Check power supply (refer screen below)
Selecting Component - Stock items
Click on the Components tab to assign the components that are required for the operations, the following screen appears
Click on the drop down
Click on the drop down down list appears,
button of the components field, the following screen appears
button of the material Type field, the following drop
TRF/EPM3.0 Page 23 of 48
!!"
#$!!
Project: MISSION SURE
Select the material type “ERSA” and click on the check mark populated on the Material type field, as shown in screen below
TRF/EPM3.0 Page 24 of 48
!!"
button to get the value
#$!!
Project: MISSION SURE
Click on the check mark button of the above window, to get the components drop down list, as shown in screen below
Scroll the list up and down and locate the required component, and select this component button of the above window, to get the value populated and click on the check mark on the components field. (the screen will look as shown below)
Similarly locate and get the component required for the next operation. The screen will look as shown below, after populating the value in the field. Also key-in the values for the following fields (refer screen below) a) Quantity b) Unit c) Plant d) Operation No
TRF/EPM3.0 Page 25 of 48
!!"
#$!!
Project: MISSION SURE
button , the following screen appears, showing the Click on the check mark description and procurement type for the components.
Select the above two line items of the components and Click on the material availability (overall) button to check the availability of the material. The following message appears at the status line
Since the material is available, it is reserved for this notification, and no PR need to be raised to get the material.
For procurement of external Services Go to the Operations tab, change the control key to PM03 (Plant maintenance - external services), and key in the operation description as “External services”. (Refer screen below)
TRF/EPM3.0 Page 26 of 48
!!"
#$!!
Project: MISSION SURE
And press the External
push button at the bottom of the screen
The following screen appears
In the above screen, key-in the following details a) Short text b) Quantity c) UOM d) Gross Price and then click on the check mark button, the system will populate the cost element value automatically (refer screen below)
TRF/EPM3.0 Page 27 of 48
!!"
#$!!
Project: MISSION SURE
Click the save screen
button to save the record. The system returns back to the following
With the following message at the status line
Note down this Order number to, which will be used while drawing the materials from the stores.
End of documentation on T-code IW34
TRF/EPM3.0 Page 28 of 48
!!"
#$!!
Project: MISSION SURE
4. Change the Breakdown maintenance Order of a Notification – Transaction Code IW32 Procedural Steps
Purpose Change the Breakdown maintenance Order of a Notification
Transaction Code IW32
Navigation: SAP Easy Access > Logistics > Plant maintenance > Maintenance Processing > Order > IW32 – Change
Procedure Enter the Transaction code IW32 in the command field as shown in the screen below
Or go as per the navigation shown below and click IW32 - Change
TRF/EPM3.0 Page 29 of 48
!!"
#$!!
Project: MISSION SURE
Press or click on the check mark
icon in the top left side corner of the
Screen, the following screen will appear Key-in the Order Number in the Order field (refer screen below)
TRF/EPM3.0 Page 30 of 48
!!"
#$!!
Project: MISSION SURE
click on the check mark
button, the following screen appearsr
TRF/EPM3.0 Page 31 of 48
!!"
#$!!
Project: MISSION SURE
Click on the release
button, to release the order. The following screen appears.
In the above screen, key-in the
Requisition Number and Tracking No.
Once the values are keyed-in, the screen will look as shown below
Click on the check mark
button, the following screen will appear
TRF/EPM3.0 Page 32 of 48
!!"
#$!!
Project: MISSION SURE
With the following message at the status line.
Click the save
button, the system will return back to the following screen
TRF/EPM3.0 Page 33 of 48
!!"
#$!!
Project: MISSION SURE
With the following message at the status line
End of document on T=code IW32
TRF/EPM3.0 Page 34 of 48
!!"
#$!!
Project: MISSION SURE
5. Order Confirmation – Transaction Code IW44 Procedural Steps
Purpose Order Confirmation
Transaction Code IW44
Navigation: SAP Easy Access > Logistics > Plant maintenance > Maintenance Processing > Completion confirmation > Entry > Collective time confirmation. IW44 – Without Selection
Procedure Enter the Transaction code IW44 in the command field as shown in the screen below
Or go as per the navigation shown below and click IW44 – without Selection
TRF/EPM3.0 Page 35 of 48
!!"
#$!!
Project: MISSION SURE
Press or click on the check mark
icon in the top left side corner of the
Screen, the following screen will appear Key-in the Order Number in the Order field (refer screen below)
TRF/EPM3.0 Page 36 of 48
!!"
#$!!
Project: MISSION SURE
Key-in the values for the following fields a) Order No b) Operation No c) Note: F N
Check mark stands for stands for
in the check boxes
of F and N fields
Final confirmation and No remain Work
Once all the values are keyed in fro all the three operations of the order, the screen will look as below
button, the screen automatically populating values in other Click the check mark required fields as shown below
TRF/EPM3.0 Page 37 of 48
!!"
#$!!
Project: MISSION SURE
Click the save
button, the system will return back to the following screen
With the following message at the status line
Return back to the SAP Easy Access Screen or Home Screen. End of document of T-code IW44
TRF/EPM3.0 Page 38 of 48
!!"
#$!!
Project: MISSION SURE
6. Completion of Notification – Transaction Code IW22 Procedural Steps
Purpose Notification Completion
Transaction Code IW22
Navigation: SAP Easy Access > Logistics > Plant maintenance > Maintenance Processing > Notification > IW22 – Change
Procedure Enter the Transaction code IW22 in the command field as shown in the screen below
Or go as per the navigation shown below and click IW22 – without Selection
TRF/EPM3.0 Page 39 of 48
!!"
#$!!
Project: MISSION SURE
icon in the top left side corner of the
Press or click on the check mark Screen, the following screen will appear
Key-in the Notification Number in the Notification field (refer screen below)
TRF/EPM3.0 Page 40 of 48
!!"
#$!!
Project: MISSION SURE
click on the check mark
button, the following screen appears
TRF/EPM3.0 Page 41 of 48
!!"
#$!!
Project: MISSION SURE
Update the Malfunction data. b) Key-in the malfunction end date and time
and click the check mark
Click on the completion flag following screen appears.
button, the screen will look as below
button, and then click on the save
TRF/EPM3.0 Page 42 of 48
!!"
#$!!
button, the
Project: MISSION SURE With the following message at the status line
End of document of T-code IW22
TRF/EPM3.0 Page 43 of 48
!!"
#$!!
Project: MISSION SURE
7. Change Order – Transaction Code IW32 Procedural Steps
Purpose Change Order
Transaction Code IW32
Navigation: SAP Easy Access > Logistics > Plant maintenance > Maintenance Processing > Order > IW32 – Change
Procedure Enter the Transaction code IW32 in the command field as shown in the screen below
Or go as per the navigation shown below and click IW32 – Change
TRF/EPM3.0 Page 44 of 48
!!"
#$!!
Project: MISSION SURE
Press or click on the check mark
icon in the top left side corner of the
Screen, the following screen will appear Key-in the Order Number in the Order field (refer screen below)
TRF/EPM3.0 Page 45 of 48
!!"
#$!!
Project: MISSION SURE
Click on the check mark
button, the following screen appears
TRF/EPM3.0 Page 46 of 48
!!"
#$!!
Project: MISSION SURE
button, the following pop up window
Click on the technical completion flag appears
Click on the check mark following screen
button of the above screen, the system will return back to the
With the following message at the status line
End of document of T-code IW32
End of Training Manual on Breakdown Maintenance process, Document No: TRF/EPM/3.0 !!" #$!!
TRF/EPM3.0 Page 47 of 48
!!"
#$!!
Project: MISSION SURE
TRF/EPM3.0 Page 48 of 48
!!"
#$!!
View more...
Comments
