Sales Presentation - OmniScan SX-R1

OmniS iSca can n SX Sales Presentation

Olympus Phased Array History

TomoScan Focus 1997

TomoScan PA 1993

Epoch 1000i 2009

Focus Focu s LT LT 2004

OmniScan MX 2002

M module 2006

PA2 module 2012

OmniSca OmniScan n MX2 MX2 2011

20 Years Years Later… PA technology has evolved and can bring bri ng even more value to the NDT Market…

Olympus Phased Array History

TomoScan Focus 1997

TomoScan PA 1993

Epoch 1000i 2009

Focus Focu s LT LT 2004

OmniScan MX 2002

M module 2006

PA2 module 2012

OmniSca OmniScan n MX2 MX2 2011

20 Years Years Later… PA technology has evolved and can bring bri ng even more value to the NDT Market…

Market Request  A more more accessible unit  for less demanding applications - Affo Afford rdab able le - Simpl mple

Faster to teach, easier to learn

Market Request

Lighter, Smaller, Better Portability  Portability 

Market Request OmniScan - The Reference

SX

Smaller, Lighter, Still an OmniScan • Same interface • Same performance • More accessible :  – Price  – Simplicity

SX - Smaller with a big S!  Lighter : 33% Smaller : 50%

SX Comes in 2 Models SX UT  – 1x UT channel • Pulse-Echo

• Pitch-catch • TOFD (Time of Flight Diffraction)

SX PA  – PA 16:64 PR  – 1x UT channel

SX Hardware Overview PA connector 

SX PA

Encoder connector 

UT connectors

SX UT

SX Hardware Overview

Video Output Battery

Flash Card

USB

MX2 vs SX 

MX2:

SX:

• Multi-Group inspection

• Single group inspection

• Modularity for changing needs

• Small • Simple

Welcome to the Family 

 Applications With it’s single group capability, the OmniScan SX is the answer for less demanding applications.

It is ideal for linear zero-degree inspection, such as corrosion mapping or composite inspection, as well as weld inspection using one phased array group or one TOFD channel.

 Applications Weld inspection

Tim

Of Flig ht (TOFD) 

 Applications Weld inspection

O n e Ph a s e d A r r a y p r o b

manual or encoded 

 Applications Corrosion

One PA probe 2-axis encoded  – HydroFORM or RexoFORM on the

Capabilities  All those applications can be fully addressed because of the following capabilities: 1. Single group 2. Imaging 3. Data Storage 4. Manual or Encoded (one or two axis) 5. Post-Analysis or Results Traceability

1. Single Group • Examples of what is called a single group:  –  A linear using 1x PA probe  –  A sectorial using 1x PA probe  –  A TOFD using 2x UT probes  –  A Pulse-Echo using 1x UT probe  –  A Pitch-Catch using 1x dual UT probe

Or 

1. Single Group • Examples of what is called a single group:  –  A linear using 1x PA probe  –  A sectorial using 1x PA probe  –  A TOFD using 2x UT probes  –  A Pulse-Echo using 1x UT probe  –  A Pitch-Catch using 1x dual UT probe

1. Single Group • Examples of what is called a single group:  –  A linear using 1x PA probe  –  A sectorial using 1x PA probe  –  A TOFD using 2x UT probes  –  A Pulse-Echo using 1x UT probe  –  A Pitch-Catch using 1x dual UT probe

1. Single Group • Examples of what is called a single group:  –  A linear using 1x PA probe  –  A sectorial using 1x PA probe  –  A TOFD using 2x UT probes  –  A Pulse-Echo using 1x UT probe  –  A Pitch-Catch using 1x dual UT probe

1. Single Group • Examples of what is called a single group:  –  A linear using 1x PA probe  –  A sectorial using 1x PA probe  –  A TOFD using 2x UT probes  –  A Pulse-Echo using 1x UT probe  –  A Pitch-Catch using 1x dual UT probe

1. Single Group • Examples of what is called a single group:  –  A linear using 1x PA probe  –  A sectorial using 1x PA probe  –  A TOFD using 2x UT probes  –  A Pulse-Echo using 1x UT probe  –  A Pitch-Catch using 1x dual UT probe

•  Any combination of 2 or more of the above is called a Multi-Group application

• The OmniScan MX2 has a capability of 8 groups.

2. Imaging •  A-Scan  Imaging for volumetric representation.

B Scan

C Scan

S Scan

3. Data Storage •  After an acquisition is saved, all A-Scans are stored on the Flash card. • Stored data can be post analysed within the instrument or on a computer using OmniPC or TomoView. • One of the feature that is commonly required for code compliancy is the ability to archive unprocessed data.

4. Encoding • Required for precise defect positioning and sizing

• Same encoder connector and capabilities between the MX2 and the SX • One encoder is typically well suited for applications such as weld inspection. • Two encoders are a best fit for corrosion or composite mapping (XY raster scan)

 Advanced Portable Ultrasonic Portfolio MX2

Price

PA 32:128

SX PA 16:128

Epoch1000 Series

PA 16:64

SX PA PA UT

SX UT

UT 2Ch

Capacity Comparison Multi-group Data Storage Maximum Voltage (UT) Maximum Voltage (PA) Maximum configuration (PA) Number of encoded axis Screen Size (in) S-Scan Refresh rate Analog & Alarm Output TOFD Compatibility : NDT SetupBuilder, OmniPC, and Tomoview Reporting with Table of Indications Upgrade model with 100% credit

475 80 16:64 1* 6.5 20Hz Y

SX

MX2

Y

Y Y

340 115 16:64PR 2 8.4 60Hz Y

340 115 32:128 2 10.4 60Hz Y Y

Y

Y

Y Y

Y Y

MX2 Extra Capabilities over SX • Multi-Group (Up to 8) • Modular for easy upgrade path  – 16:64 to: 16:128, 32:128, 32:128PR

• Larger Screen • Extended Battery life with hot swap capability

SX Extra Capabilities over Epoch 1000 • TOFD • Full A-Scan code compliant data storage • Full speed encoding for up to 2 axes • Compatible with OmniPC and TomoView

Software compatibility / inclusion NDT SetupBuilder  Compatible OmniScan SX UT OmniScan SX PA

X

OmniScan MX2 UT OmniScan MX2 PA

X

OmniScan MX2 UT2 OmniScan MX2 PA2

X

OmniPC compatible

NDT SetupBuilder & OmniPC included in the package

TomoView analysis

X

X

X

X

TomoView Control

X

X

X

X

X

X

X

X

X

X

X

X

X

X

 All setup and data created are compatible between OmniPC or OmniScan regardless of if it is an SX, MX2 or the module generation. Moving forward we support the past ! 

Continuous Software Enhancements 

Olympus is answering to feedbacks in order to achieve continuous improvement to the software for : • Simpler and faster interface • Enhanced user experience



3 environments unified : • SX or MX2 (touch screen) • SX or MX2 (mouse) • OmniPC (mouse + keyboard)

Improved Interface Usability Common functions are all available in full screen mode for tablet-like user-friendliness.

M o r e f u n c t i o n a li t y , m o r e p r o d u c t i v i t y , l es s t r ai n i n g  

 Application Wizard  Application Wizard for the SX allows fast setups creation for most common applications:  – UT Flaw Detector   – UT Corrosion  – UT TOFD  – PA Corrosion  – PA Weld

Data Views Contextual menus available with a simple tap-and-hold

Why Partner with Olympus • Global sales force & technical expertise presence • 17 service centers worldwide • Free complete training program available • 28 Training partners to accompany the operators including certifications • ONDT listens to customers needs…for continuous development • Customers have had access to free software upgrades for 10 years…

PA & TOFD Market Reference • Thousands of units sold • Rugged for the field • Largest pool of trained operators • Rigorous production process (Québec, Canada) • Complete Portfolio • Dedicated to development

We offer m or e than sp ecs alo ne... W e o ff er u s ab il it y  

Service center locations