Renualt CAN CLIP Instalaltion and Operation User Manual

January 9, 2017 | Author: Florent Morel | Category: N/A
Share Embed Donate


Short Description

Download Renualt CAN CLIP Instalaltion and Operation User Manual...

Description

Renault CAN Clip software installation and operation user manual Renault Can CLIP installation: Renault CAN CLIP V103 software: (You could install in desktop and lapt op) Operating system: Win 2000, XP, Vista. We recommend the XP English regarding to the Compatibility with CAN CLIP device. A、 、To install software, you need to set the Regional and Language f irst.

Go to control panel and double click Regional and Language to open i t: Select English (United Kingdom) and Location as United Kingdom an d then click OK to exit:

B、 、Run license file (If you don not see the Crack! File in CD, please co ntact us)

Double click it, you will see this new window:

Click “YES”:

Click“OK” to exit. C、 、Put Renault CAN CLIP CD into Driver, you will see Renault folder:

Double click Setup:

Select First INSTALLATION, then click Next:

Select I accept the terms of the license agreement:

Select country as UNITED KINGDOM,click next:

Select RENAULT, click next:

Click next, the installation may take about 10 minutes.

、After you finish the installation, you need to restart computer. D、 Run the software installed, you may encounter this SPX Computer Regis

tration problem.

Note: The unregistered version has only 5-day use limitation. We could use the software without registration to avoid the limitation. Click ctrl + alt + delete buttons to run the task manager as picture sh ows, select RSRWin.exe to end it. Go to Add or Remove Programs in control panel, select RSRWinDeps program and remove it; next time when you restart computer to launch it, the 5-day use limitation message will disappear.

E. Follow to install the USB driver: Now connect Renault Clip device to PC. Found New Hardware Wizard window will appear:

Press Next. After few moments new window will appear:

Select Continue Anyway. After drivers are installed, new window will app ear,Press Finish.:

Another Found New Hardware Wizard window will appear:

Press Next, then select Continue Anyway in new window appeared:

After that window asking path for drivers will appear. Type c:\windows\sy stem32\drivers and press OK:

Press Finish to close the wizard:

3 more Found New Hardware Wizard windows will appear (for devices J CAE ISO AVANT RENUMERATION, JCAE CAN APRES RENUMERATION, JCAE I SO APRES RENUMERATION). Repeat steps described in previous item for each of t hem.

Now launch Renault Clip software by double clicking on CLIP icon from desktop. Main window should appear: Note: There should be four indicators on device in ON status!

Renault Can CLIP Operation Double click Clip in desktop:

You will see this window:

Click OK button, you will see this window:

Input the detail vehicle information: At “1” position, input the VIN number, click “√” at “2”; then clip will chec k the vehicle details automatically; At “4” position select the Gearbox type and the last 6 digits VIN at “5” position

Here is an example:

After you input the vehicle information, click computer test to enter the clip diagnostic page:

Click the PETROL INJECTION button, you will see this page:

Computer Identification: to read out the computer details, you could get the detail computer number and others Faults Test: to read out trouble codes List Of Parameters List Of Statuses: list the live data stream Command Mode: to set/program parameters Diagnostic sheet List Of Detectable Faults: store all history trouble codes read out Functions test Conformity check Tests per Customer Complaint Statuses And Parameters Recording Click Faults Test to diagnose the trouble codes:

Here is the diagnostic result:

Click ERASING to clear the codes:

Click YES

After we finish the trouble codes clear, then try to read the codes again:

You will see no trouble codes in list.

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF