Reinhardt Methodology
Short Description
Reinhardt Methodology...
Description
INFORMATION TO U SER S
This manuscript has been reproduced from the microfilm master. UMI films the text directly from the original or copy submitted. Thus, som e thesis and dissertation copies are in typewriter face, while others may be from any type of com puter printer. The quality of this reproduction is d e p en d en t upon th e quality of th e co p y subm itted. Broken or indistinct print colored or poor quality illustrations and photographs, print bleedthrough, substandard margins, and improper alignment can adversely affect reproduction. In the unlikely event that the author did not send UMI a complete manuscript and there are missing pages, these will be noted.
Also, if unauthorized
copyright material had to be removed, a note will indicate the deletion. Oversize materials (e.g., maps, drawings, charts) are reproduced by sectioning the original, beginning at the upper left-hand comer and continuing from left to right in equal sections with small overlaps. Photographs included in the original manuscript have been reproduced xerographically in this copy.
Higher quality 6” x 9” black and white
photographic prints are available for any photographs or illustrations appearing in this copy for an additional charge. Contact UMI directly to order.
Bell & Howell Information and Learning 300 North Zeeb Road, Ann Arbor, Ml 48106-1346 USA 800-521-0600
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
AN ANALYSIS, CLARIFICATION, AND REVALUATION OF DONALD REINHARDT’S PIVOT SYSTEM FOR BRASS INSTRUMENTS by David Ray Turnbull
A Research Paper Presented in Partial Fulfillment o f the Requirements for the Degree Doctor o f Musical Arts
ARIZONA STATE UNIVERSITY May 2001
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
UMI Number: 3001298
___
®
UMI
UMI Microform 3001298 Copyright 2001 by Bell & Howell Information and Learning Company. All rights reserved. This microform edition is protected against unauthorized copying under Title 17, United States Code.
Bell & Howell Information and Learning Company 300 North Zeeb Road P.O. Box 1346 Ann Arbor, Ml 48106-1346
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
AN ANALYSIS, CLARIFICATION, AND REVALUATION OF DONALD REINHARDT’S PIVOT SYSTEM FOR BRASS INSTRUMENTS by David Ray Turnbull
has been approved March 2001
. Chair
u Supervisory Committee
ACCEPTED:
D ^ ^ S th e
s
-u <
Dean, Graduate College^ \
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
ABSTRACT Donald Reinhardt discovered and cataloged different brass embouchure types and established the correlation o f these types to different dental structures. He published the results o f his research in Donald S. Reinhardt’s Pivot System for Trumpet in 1942 and The Encyclopedia o f the Pivot System in 1973. Two problems are evident with Reinhardt’s published research. The first problem arises with his attempt to describe a phenomenon that takes place at a brass player’s embouchure—specifically, the embouchure mechanics involved in ascending and descending on a brass instrument. He coined the term “pivot,” which led to many misconceptions and misunderstandings, and frequently resulted in a dismissal o f Reinhardt’s “system” and a general disregard for his research-including his valuable embouchure classifications. A solution to the problem with “pivot” is the substitution o f the term “track,” a much more accurate term. The central incisors o f both the top and bottom teeth form a type o f track, and it is on this track that the vertical pushing and pulling o f the lips and mouthpiece occur as a unit. The second problem with Reinhardt’s work has to do with the organization o f his diagrams o f basic dental structures and the mouthpiece placements associated with each. DonaldS. Reinhardt's Pivot System fo r Trumpet contains diagrams that depict various aspects o f the different embouchure classifications, but cross-referencing is necessary and sometimes difficult for the reader. Reinhardt’s lengthy second work, The Encyclopedia o f the Pivot System, has a thorough text, but the diagrams lack the size and detail needed for full comprehension. iii
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
The present study provides a solution to these problems by providing detailed photographs o f the predominant dental structures and o f actual trumpet players exhibiting different embouchure types. The photographs clarify Reinhardt’s work and provide new insights into understanding the brass embouchure. They illustrate that dental bite generally affects mouthpiece placement but does not necessarily affect tracking. When coupled with related research, the photographs show that the position o f the central and lateral incisors affects both mouthpiece placement and tracking.
IV
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
ACKNOWLEDGMENTS I will forever be in debt to my wife Marsha, for without her support, I would not have been able to accomplish any o f this. Special thanks go to my good friend Rene Bernard. His willingness to answer so many questions about Reinhardt was invaluable. Thanks go to Elmer Krai, Christopher von Baeyer and Louise Barber. They were extremely helpful when it came to advice on style and content. Thanks also goes to the following ASU faculty members: Richard Strange, J. Samuel Pilafian, Daniel Perantoni, Robert Spring, James DeMars, and Jerry Doan. I will always remember Gail Eugene Wilson for his special help. Finally, I would like to extend a very special thanks to David R. Hickman for helping me bring many o f my hopes and aspirations to fruition.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
TABLE OF CONTENTS Page LIST OF FIGURES............................................................................................................ viii CHAPTER 1 INTRODUCTION.......................................................................................
1
Background......................................................................................
1
Statement o f Purpose......................................................................
8
Rationale for the Study....................................................................
9
Questions to be Answered...............................................................
9
Limitations.......................................................................................
11
REVIEW OF RELATED LITERATURE.................................................
12
Introduction.....................................................................................
12
Use o f Photography to Study Brass Embouchures.......................
13
Use o f Electromyography to Study Brass Embouchures..............
19
The Instrumentalist: Brass Anthology............................................
20
Central and Lateral Incisors Related to Embouchure....................
22
Summary o f Literature Review.......................................................
25
2
3
PHOTOGRAPHS OF THE DIFFERENT EMBOUCHURE TYPES
27
Research Procedures.......................................................................
27
Types I and IA .................................................................................
28
Types II and HA...............................................................................
37
Types HI, IIIA and LLJLB...................................................................
46
Types IV and IVA...............................
59
vi
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
CHAPTER 4
Page SUMMARY....................................................................................................
68
Upstream and Downstream Embouchures......................................
68
Oddity o f Type IV and IVA Embouchures.....................................
70
Tracking and Mouthpiece Placement..............................................
72
SELECTED BIBLIOGRAPHY..........................................................................................
76
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
LIST OF FIGURES Figure
Page
L Front View o f a Type I Dental Structure (Even B ite).........................................
29
2. Right View o f a Type I Dental Structure (Even Bite).........................................
29
3. Left View o f a Type I Dental Structure (Even B ite)............................................
29
4.
View of a Type I Dental Structure (Maxillary Incisors).....................................
30
5.
View of a Type I Dental Structure (Mandible Incisors)......................................
30
6.
View o f the Mouthpiece Placement o f a Downstream, Type I Embouchure
30
7.
View o f a Type I Embouchure Playing C4 (Concert B-flat 3)...........................
31
8. View o f a Type I Embouchure Playing C5 (Concert B-flat 4 )............................
31
9. View of a Type I Embouchure Playing C6 (Concert B-flat 5)............................
31
10. Front View of a Type LA. Dental Structure (Even B ite)......................................
33
11. Right View of a Type LA Dental Structure (Even B ite)......................................
33
12. Left View of a Type LA Dental Structure (Even B ite)........................................
33
13.
View of a Type LA Dental Structure (Maxillary Incisors).................................
34
14.
View of a Type LA Dental Structure (Mandible Incisors)..................................
34
15.
View o f the Mouthpiece Placement of an Upstream, Type IA Embouchure
34
16.
View of a Type LA Embouchure Playing C 4 ......................................................
35
17.
View of a Type LA Embouchure Playing C 5......................................................
35
18.
View of a Type LA Embouchure Playing C 6......................................................
35
19.
Front View o f a Type LI Dental Structure (Underbite).......................................
38
20.
Right View of a Type II Dental Structure (Underbite)......................................
38
viii
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
Figure
Page
21. Left View o f a Type II Dental Structure (Underbite)..........................................
38
22.
View o f a Type II Dental Structure (MaxillaryIncisors).....................................
39
23.
View o f a Type II Dental Structure (Mandible Incisors)....................................
39
24.
View o f the Mouthpiece Placement o f an Upstream, TypeII Embouchure
39
25.
View o f a Type II Embouchure Playing C 4.........................................................
40
26.
View of a Type II Embouchure Playing C 5.........................................................
40
27.
View of a Type II Embouchure Playing C 6.........................................................
40
28.
Front View o f a Type DA Dental Structure (Underbite)....................................
42
29.
Right View o f a Type HA. Dental Structure (Underbite)....................................
42
30.
Left View o f a Type HA. Dental Structure (Underbite)......................................
42
31.
View of a Type DA Dental Structure (Maxillary Incisors)................................
43
32.
View of a Type DA Dental Structure (Mandible Incisors).................................
43
33.
View of the Mouthpiece Placement of an Upstream, TypeDA Embouchure....
43
34.
View of a Type DA Embouchure Playing C 4 .....................................................
44
35.
View of a Type DA Embouchure Playing C 5.....................................................
44
36.
View o f a Type DA Embouchure Playing C 6.....................................................
44
37.
Front View o f a Type ID Dental Structure (Overbite).......................................
47
38.
Right View o f a Type ID Dental Structure (Overbite).......................................
47
39.
Left View o f a Type ID Dental Structure (Overbite)..........................................
47
40.
View of a Type ED Dental Structure (Maxillary Incisors)..................................
48
41.
View of a Type ED Dental Structure (Mandible Incisors).................................
48
ix
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
Figure
Page
42. View o f the Mouthpiece Placement o f a Downstream, Type IH Embouchure..
48
43.
View o f a Type III Embouchure Playing C4........................................................
49
44.
View o f a Type III Embouchure Playing C5........................................................
49
45.
View o f a Type IH Embouchure Playing C6........................................................
49
46.
Front View of a Type 1HA Dental Structure (Overbite)........................................
51
47.
Right View o f a Type IDA Dental Structure (Overbite).......................................
51
48. Left View o f a Type IDA Dental Structure (Overbite)...........................................
51
49.
View o f a Type IDA Dental Structure (Maxillary Incisors).................................
52
50.
View o f a Type EIA Dental Structure (Mandible Incisors).................................
52
51.
View of the Mouthpiece Placement o f a Downstream, Type HIA Embouchure.........................................................................................................
52
52.
View of a Type IDA Embouchure Playing C4......................................................
53
53.
View o f a Type IDA Embouchure Playing C 5......................................................
53
54.
View o f a Type IDA Embouchure Playing C6......................................................
53
55.
Front View o f a Type DTB Dental Structure (Overbite)........................................
55
56.
Right View o f a Type DIB Dental Structure (Overbite)........................................
55
57.
Left View o f a Type 111B Dental Structure (Overbite)..........................................
55
58.
View o f a Type DTB Dental Structure (Maxillary Incisors).................................
56
59.
View of a Type DIB Dental Structure (Mandible Incisors)..................................
56
60.
View of the Mouthpiece Placement o f a Downstream, Type DIB Embouchure.........................................................................................................
56
View of a Type DIB Embouchure Playing C 4.....................................................
57
61.
x
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
Figure
Page
62.
View of a Type IIIB Embouchure Playing C 5 .....................................................
57
63.
View of a Type IDB Embouchure Playing C 6.....................................................
57
64.
Front View o f a Type IV Dental Structure (Overbite).........................................
60
65.
Right View o f a Type IV Dental Structure (Overbite).........................................
60
66.
Left View of a Type IV Dental Structure (Overbite)..........................................
60
67.
View of a Type IV Dental Structure (Maxillary Incisors)..................................
61
68.
View of a Type IV Dental Structure (Mandible Incisors)...................................
61
69.
View of the Mouthpiece Placement o f an Upstream, Type IVEmbouchure
61
70.
View of a Type IV Embouchure Playing C 4 ........................................................
62
71.
View of a Type IV Embouchure Playing C 5 .......................................................
62
72.
View of a Type IV Embouchure Playing C 6 .......................................................
62
73.
Front View of a Type IVA Dental Structure (Overbite).....................................
64
74.
Right View of a Type IVA Dental Structure (Overbite).....................................
64
75.
Left View of a Type IVA Dental Structure (Overbite).......................................
64
76.
View of a Type IVA Dental Structure (Maxillary Incisors)................................
65
77.
View of a Type IVA Dental Structure (Mandible Incisors)................................
65
78.
View of the Mouthpiece Placement of an Upstream, Type IVA Embouchure..
65
79.
View o f a Type IVA Embouchure Playing C4.....................................................
66
80.
View of a Type IVA Embouchure Playing C5.....................................................
66
81.
View of a Type IVA Embouchure Playing C6.....................................................
66
82.
Left View of a Type IV Dental Structure (Overbite)............................................
xi
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
71
Figure
Page
83.
View of the Mouthpiece Placement o f an Upstream, Type IV Embouchure
71
84.
View of a Type IVA Dental Structure (Maxillary Incisors)...............................
72
85.
View of the Mouthpiece Placement o f an Upstream, Type IVA Embouchure.. 72
86.
View of a Type DA Dental Structure (Maxillary Incisors)................................
87.
View of the Mouthpiece Placement o f an Upstream, Type HA Embouchure.... 74
xii
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
73
CHAPTER ONE INTRODUCTION
Background In the field of brass pedagogy, the subject of the player’s embouchure continues to be a source of debate and confusion, so much so that, according to Roger Dane* “Theories on positioning the embouchure are very inconsistent. The complex nature of this subject causes some teachers to refrain from an educational discussion of the matter.”1 Differences of opinion on mouthpiece placement are also abundant, as the following two contradictory examples illustrate. Bailey and others state that: “Unfortunately, there is no ‘magic’ spot on the lips to place the mouthpiece. The mouthpiece should be centered over the aperture.. . . For most, this is directly centered on the lips both vertically and horizontally. The mouthpiece should be placed so that equal amounts fall on both the upper and lower lips.”2 However, Zom insists that: “. . . the inside rim o f every brass-instrument mouthpiece is placed on the player’s lower lip line.. . . The amount of upper lip encompassed by the rest of the mouthpiece will vary with both players and mouthpieces.”3
1 Roger Dane, Theories on Embouchure and Breathing: An Analytical Investigation into the Functions for Sound Production on the Trumpet (Masters th., University of Louisville, 1983), 4. - Wayne Bailey and others, Teaching Brass: A Resource Manual (New York: McGraw-Hill, 1992), 25. 3 Jay Zom, Brass Ensemble Methods (San Francisco: Wadsworth Publishing Company, 1995), 4.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
2 Other sources o f informatiom on the subject o f mouthpiece placement make safe generalizations. Keith Johnson says that: “as a general observation, most trumpet players appear to use slightly less upper thain lower lip, although there are certainly some veiy successful exceptions to this.”4 Yet the common sense appnoach to the discussion o f mouthpiece placement is the one that considers the differing physical properties o f each individual. This single factor accounts for a vast number o f differ-ences. Charles Colin concludes that: “. . . wherever the mouthpiece feels most comfortable. and the lips vibrate most freely,. . . is the correct placement. Lip formations o f every player are as different as the individual. . . . Therefore it is obviously foolish to say that th e best placement is ‘half and half.”5 Finally, Rafael Mendez, among the greatest o f trunnpet players o f the twentieth century, seems to agree. In Prelude to Brass Playing he conltributes to the common sense approach: As to the amount of'mouthpiece on each lip, there can be no hard-and-fast rule. One player will get his best results from half on each lip; one will find that more mouthpiece on the upper lip suits him; another will use more on the lower lip. It is important that you adopt a position that is natural to you. This will be determined largely by the shiape o f your mouth and teeth.6 Although the shape o f the imouth and teeth (the dental structure) determines the natural placement o f the mouthpiecee, only two significant sources o f information on this subject exist: one is by William A. Fsfund, currently on faculty at the University o f Northern Colorado-Greeley; the otbier is by the late Donald S. Reinhardt. Pfund’s research
4 Keith Johnson, The Art ofTrurmpet Playing (Ames: Iowa State University Press, 1981), 64. 5 Charles Colin, Vital Brass Not&s (New York: Charles Colin, 1967), 7. 6 Rafael Mendez, Prelude to Brazss Playing (Boston: Carl Fischer, 1961), 35.
Reproduced with permission o f the copyright owner. Further reproduction prohibited without permission.
3 deals primarily with mouthpiece placement and its relationship to the position o f the maxillary incisors, while Reinhardt’s research classifies mouthpiece placement and its relationship to dental bite. Reinhardt’s work is the more compelling. In the opinion o f many, the foremost authority on the subject o f brass instrument embouchures was Donald Reinhardt (d. 1989), a highly respected trombone player and brass pedagogue. For nearly fifty years hundreds o f professional brass players sought his insight and instruction. Reinhardt was one o f the first to discover upstream and downstream embouchures (i.e., air splashes in the cup above or below the throat o f the mouthpiece respectively).7 He also discovered and cataloged different brass embouchure types and the correlation o f these types to different dental structures, published in his books Donald S. Reinhardt’s Pivot System fo r Trumpet: A Complete Manual with Studies (1942) and The Encyclopedia o f the Pivot System fo r all Cupped Mouthpiece Brass Instruments: A Scientific Text (1973). In both books he documents four basic dental structures and the mouthpiece placements associated with each. Two problems are evident with the presentation o f Reinhardt’s research in his books. The first problem arises with Reinhardt’s attempt to describe a phenomenon that takes place at a brass player’s embouchure—specifically, the embouchure mechanics
7 Rene Bernard, long a student of Reinhardt’s, demonstrated this phenomenon at a clinic. Several trumpet students performed using a transparent mouthpiece. The air and saliva o f downstream players exited the aperture, splashed into the cup of the mouthpiece below the throat, and spiraled counterclockwise around the cup into the throat o f the mouthpiece. The air and saliva o f the upstream player exited the aperture, splashed into the cup o f the mouthpiece above the throat, and also spiraled counterclockwise around the cup into the throat (Rene Bernard, Trumpet Clinic, University of Kansas, March 11, 1991).
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
4 involved in ascending and descending on a brass instrument. He coined the term “pivot,” but it is a poor choice because it does not accurately describe this natural event. The term has led, instead, to many misconceptions and misunderstandings, one o f which is tilting the instrument down to ascend and up to descend. Attempts to apply such a misguided technique have been counterproductive, and have resulted in a general rejection o f Reinhardt’s “system” and a virtual disregard for his research—including his valuable embouchure classifications. The second problem has to do with his diagrams o f basic dental structures and the mouthpiece placements associated with each. Donald S. Reinhardt's Pivot System fo r Trumpet contains diagrams that depict various aspects o f the different embouchure classifications, but cross-referencing is necessary and sometimes difficult for the reader.8 Reinhardt’s lengthy second work, The Encyclopedia o f the Pivot System, has a thorough text, but the diagrams lack the size and detail needed for full comprehension.9 As stated above, many brass players have the idea that the term “pivot” refers to the mechanical tilting or tipping o f the instrument to change registers, a reasonable perception. “Pivot” is defined as “. . . the action [underline added] o f turning about, oscillating, or balancing on or as if on a pivot.”10 When playing a brass instrument tilting or tipping the instrument in this manner increases the pressure on one lip while decreasing
8 Donald S. Reinhardt, Donald S. Reinhardt’s Pivot System fo r Trumpet: A Complete Manual with Studies (Bryn Mawr: Elkan-Vogel, Inc., 1942), 8-11. 9 Donald S. Reinhardt, The Encyclopedia o f the Pivot System fo r all Cupped Mouthpiece Brass Instruments: A Scientific Text, aug. ver. (New York: Charles Colin, 1973), 202-203. 10 Webster’s Third New International Dictionary, 1993 ed., s.v. “pivot.”
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
5 the pressure on the other. But because this destroys the hermetic seal and produces embouchure problems, most players avoid such a maneuver. Roger Dane’s thesis illustrates this misinterpretation well. He states that: Another theory is the system of pivoting the mouthpiece in different registers. This pivot system was popularized by Donald Reinhardt and is personalized with a system of categorizing types of dento-facial [s/c] groupings. Basically it is a tilting of the horn downward in the upper range to lessen the pressure on the top lips [sic] and vice versa. This system is indeed controversial and Delbert Dale . . . expressed gratitude for the short life o f the pivot system.11 In his thesis, Charles L. Isley, Jr. similarly misinterprets the “pivot:” A great many brasswind teachers subscribe to a pivoting of the mouthpiece while changing registers in playing. Outwardly, this method would appear to be a change of mouthpiece angle. Actually, the pivot accompanies a movement of the jaw, and is necessary to maintain the ninety degree angle of the mouthpiece as described above.1" Dane and Isley both interpreted “pivot” as a tilting or tipping of the instrument. Reinhardt, however, intended “pivot” to mean a vertical movement of the mouthpiece and lips on the face of the front teeth: The PIVOT [sic] pulls or pushes the performer’s lips into the path of the air column, so that the air column will cause the lips to vibrate over the entire range of the instrument.. . . The PIVOT is controlled by pulling down or pushing up the lips on the teeth with the rim of the mouthpiece. The outer embouchure and the mouthpiece move vertically (some with slight deviations to one side or the other) as one combined unit on the invisible vertical track of the inner embouchure; however, the position of the mouthpiece on the outer embouchure must not be altered in any way.13
11 Dane, Theories on Embouchure and Breathing, 33. 12 Charles L. Isley, Jr., A Theory o f Brasswind Embouchure Based Upon Facial Anatomy, Electromyographic Kinesiology, and Brasswind Embouchure Pedagogy (Doctoral diss., North Texas State University, 1972), 89. 13 Reinhardt, The Encyclopedia of the Pivot System, 193-194.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
6 Another common misconception (not attributed to Reinhardt’s work) is the notion that all brass players “pivot” down to ascend and up to descend. Wayne Bailey erroneously asserts that “the mouthpiece and trumpet should pivot down slightly when ascending in range and pivot up when descending.”14 A. Keith Amstutz makes the same assertion in his dissertation: “In the commonly held theories about instrument pivot, the angle between the face o f the mouthpiece and the line determined by the lower teeth and the tip o f the mandible increases as the pitch ascends and decreases as the pitch descends.”15 Bailey and Amstutz advocate a downward motion to ascend and an upward motion to descend. (It is interesting that Amstutz fails to resolve an unanticipated problem when he discovers that the instrument pivot o f subject 9 in his study was the reverse o f the anticipated tendency.)16 But Reinhardt himself states that while many brass players pivot down to ascend, some individuals pivot up to ascend. It is obvious to see that the use o f the term “pivot” is a problem. Rene Bernard describes a moment late in Reinhardt’s life when the teacher admitted the need for a different term: “Reinhardt stated that the use o f the word ‘pivot’ was one o f the worst mistakes he had ever made. It did not accurately describe the phenomenon that was taking place.”17
14 Bailey and others, Teaching Brass, 25. 15 A. Keith Amstutz, A Videojluorographic Study o f the Teeth Aperture, Instrument Pivot and Tongue Arch and Their Influence on Trumpet Performance (Doctoral diss., University o f Oklahoma, 1970), 29. 16 Amstutz, A Videofluorographic Study, 41. 17 Rene Bernard, interview by author, 16 April 1991, Olathe, KS.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
7 One solution to the problem with “pivot” is the use o f the term “track,” a much more accurate term. The central incisors o f both the top and bottom teeth form a type o f track, and it is on this track that the vertical pushing and pulling o f the lips and mouthpiece as a unit occur. To make this effective “. . . an adequate mouthpiece pressure must be employed against the lips to provide the all-essential grip.. . . the position o f the mouthpiece on the outer embouchure must not slide or change and permit multiple embouchures to form.”18 Some individuals “track down” when ascending while others “track up” when ascending; therefore, two distinct “tracking classifications” exist. Throughout the rest o f this document, the term “track” will replace the term “pivot.” The use o f this new term should help eliminate misconceptions and misunderstandings, and reverse the general disregard for Reinhardt’s research, most importantly the embouchure classifications. Donald S. Reinhardt's Pivot System fo r Trumpet contains three sets o f diagrams: the first illustrates four classifications o f dental structures, the second shows the difference in direction o f the airstream between upstream and downstream players, and the third displays what he calls the playing base or foundation o f upstream and downstream players.19 However, the reader has to compare and contrast the three sets o f diagrams and can easily become confused by the task o f cross-referencing necessary to identify individual type classification. In 1973, Reinhardt sought to rectify this problem by
18 Reinhardt, The Encyclopedia o f the Pivot System, 194. 19 Reinhardt, Donald S. Reinhardt’s Pivot System fo r Trumpet, 8-11.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
8
combining the three sets o f diagrams into one composite set. In The Encyclopedia o f the Pivot System, Reinhardt depicts the nine different embouchure types (four standard types and five subtypes). In this later text, the ability to determine standard type classifications is easier than in the first volume, but determining the subtype is still difficult, largely due to diagrams that are hand-drawn and too small.20
Statement o f Purpose This study proposes a solution to the lack o f clarity in Reinhardt’s work by providing detailed photographs o f the predominant dental structures and o f actual trumpet players exhibiting different embouchure types. Three sets o f photographs are necessary. With the aid o f lip retractors, the one set captures the dental bite o f each individual (i.e., overbite, underbite, or even bite); with the aid o f an embouchure visualizer, the second set illustrates the mouthpiece placement o f each individual; and finally, the third set demonstrates the tracking used by each individual. Controlled photographic documentation was accomplished by taking three separate photographs o f each individual playing the concert pitches o f B-flat 3, B-flat 4, and B-flat 5 on his or her instrument.
20 Reinhardt, The Encyclopedia o f the Pivot System, 202-203.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
9 Rationale for the Study Reviving and bolstering Reinhardt’s discovery and documentation o f different brass embouchures is important for the purpose o f aiding teachers and students. Furthermore, detailed photographs o f trumpet players exhibiting different embouchure classifications should be useful as a guide for the beginning student andi as an instructional aid for students suffering embouchure problems. Instrumental music teachers often try to initiate trumpet instruction with a mouthpiece placement using one-thirsd top lip and twothirds bottom lip. While this is beneficial for some, it leads to failure fo r others. Photographs illustrating the different embouchure classifications should help instructors find a more accurate mouthpiece placement for each student based on individual dental bite. Students with embouchure problems should benefit from the derailed illustrations o f the different embouchure types because the photographs can aid the student in determining if he or she needs an embouchure change. In many instances, a lack o f air support is misinterpreted as an embouchure problem. However, if the sfrudent does need to modify mouthpiece placement, the photographs should help determine tthe most appropriate position based on dental bite.
Questions to be Answered This study addresses three specific questions. First, why do individuals with perfectly even dental bites use an extreme mouthpiece placement? Second, why do some
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
10 embouchure types track up when ascending while others track down? Third, why do many individuals track at an angle? The first question concerns Reinhardt’s discovery that successful players with an even dental bite use a lip ratio o f 85 to 15 percent. According to Bernard, less than six percent o f the population have this kind o f dental structure.21 Reinhardt states that these people “are rare in that they possess perfectly even teeth, upper and lower, meeting flush when the lower jaw is in its natural position.. . . The oddity. . . is the feet that they must either place their mouthpieces very high on their upper lips (Type I), or very low on their lower lips (Type IA). It seems that anything resembling a half and half placement never works out for either o f these types.. . .”22 What possible reason is there for this? The second question concerns Reinhardt’s discovery that some embouchure types track up when ascending while others track down when ascending. At first, one might guess that this oddity has to do with whether the individual is an upstream or downstream player. This, however, is not the case. After examining Reinhardt’s research carefully, it becomes apparent that some downstream players use “tracking classification one” while others use “tracking classification two.” Upstream players use only “tracking classification two.” Specifically, Reinhardt concluded the follo wing classifications: PIVOT [TRACKING] CLASSIFICATION ONE This is the performer who while ascending pushes his lips up to a slightly higher position on his teeth (toward his nose) with the rim o f the mouthpiece, and while descending pulls his lips to a slightly lower position on his teeth (toward his chin) with the rim o f the mouthpiece.
21 Bernard, interview by author. 22 Reinhardt, The Encyclopedia o f the Pivot System, 204-205.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
11
PIVOT rTRACKINGl CLASSIFICATION TWO This is the player who while ascending pulls his lips down to a slightly lower position on his teeth (toward his chin) with the rim o f the mouthpiece, and while descending pushes his lips to a slightly higher position on his teeth (toward his nose) with the rim o f the mouthpiece.23 A third question regards tracking at an angle. According to Rene Bernard, Reinhardt found that most brass players do not track in a perfectly vertical motion, but at a slight angle: “A typical example is for a trumpet player to track down and slightly to the right while moving the lower jaw a little to the left.”24 Why isn’t tracking a perfectly vertical motion?
Limitations This study is limited to the clarification and enhancement o f Reinhardt’s research, specifically, his discernment o f the different embouchure classifications and their relation to different dental structures. Any discussion concerning the manipulation o f dental structure as an enhancement to trumpet performance is beyond the scope o f this dissertation. Therefore, any discussion o f orthodontics, removables, bonding, the removal o f wisdom teeth, plaster casts, or reconstructions is not included.
23 Reinhardt, The Encyclopedia o f the Pivot System, 199-200. 24 Bernard, interview by author.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
CHAPTER TWO REVIEW OF RELATED LITERATURE
Introduction Sources containing information on the brass embouchure are so numerous that an attempt to review all o f it would be overwhelming and unnecessary for the purposes o f this dissertation. Therefore, the field has been narrowed to include books, articles, and dissertations that (1) use some type o f photography to study the brass embouchure, (2) discuss or address the mechanics o f the embouchure (i.e., tracking or pivot), and/or (3) discuss or address mouthpiece placement in relation to dental structure. Surprisingly, a fair amount o f literature using photography exists. Still pictures and videotape are used the majority o f the time, while the use o f X-rays is limited to only a few o f the studies. Electromyography (a process that measures muscle use) was used in several studies to observe mechanics. Worth mentioning are three articles published by The Instrumentalist', like most o f the literature mentioned, they address more than just one o f the three aspects o f embouchure. An intriguing set o f studies exists concerning the position o f the central and lateral incisors and their relation to mouthpiece placement. This particular set o f studies is exciting in that, when coupled with Reinhardt’s research, it provides totally new insights into the mechanics o f the brass embouchure.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
13 The Use o f Photography to Study Brass Embouchures Philip Farkas, former Principal Horn with the Chicago Symphony Orchestra, was one o f the first to use photography to study the embouchure. Farkas published two books on the subject, The Art o f Brass Playing (1962) and A Photographic Study o f 40 Virtuoso Horn Players ’ Embouchures (1970). The Art o f Brass Playing is a treatise on the formation and use o f the brass player’s embouchure and is probably one o f the most wellknown books on the subject. It contains specific information on embouchure function, mouthpiece placement, and lip aperture. Farkas provides photographs o f the embouchures o f the entire brass section o f the Chicago Symphony Orchestra [CSO], Three photographs o f each player are included, one o f which shows the position o f the mouthpiece on the lips through an embouchure visualizer; the other two show the player playing the instrument. Embouchure mechanics are discussed with an emphasis on formation, advocating a smile and pucker. No discussion o f tracking takes place.25 One section o f the book discusses mouthpiece placement with a division into subsections for each member o f the brass family. Farkas notes that the best position o f the trumpet mouthpiece is one-third upper lip and two-thirds lower lip based upon “. . . the rule o f the best known trumpet teachers,” who include “. . . Arban, St. Jacome, Vincent Bach and Max Scholssberg.”26 When reviewing the photographs o f the CSO trumpet section, one discovers that two o f the four trumpet players use more top lip in the
25 Philip Farkas, The A rt o f Brass Playing (Bloomington: Brass Publications, 1962). 26 Farkas, The Art o f Brass Playing, 33.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
14 mouthpiece than bottom. Farkas does not account for this, and no correlation is drawn between the player’s dental structure and the position o f the mouthpiece. In A Photographic Study o f 40 Virtuoso Horn Players ’ Embouchures Farkas provides the reader with 120 photographs o f 40 different professional hom players’ embouchures. This book, while limited only to the depiction o f the hom embouchure, is much more valuable to the understanding o f embouchure mechanics. Each player was asked to play the written pitches C6, C5, and C3. The player was then asked to produce the same pitches on an embouchure visualizer for photographing. The direction o f the airstream is carefully indicated by an arrow, which consistently shows the airstream directed towards the throat o f the mouthpiece for the low register and towards the rim o f the mouthpiece for the upper register. One subject o f the study worth noting exhibits an upstream embouchure with a lip ratio o f 15% top and 85% bottom.27 The illustrations in this second book by Farkas help prove that the airstream splashes into different areas o f the cup for different registers o f the instrument, as theorized by Reinhardt: In order to assist in the creation o f the fester, tenser lip vibrations for the production o f the upper register, the air stream strikes just short o f the lower mouthpiece rim. Conversely, the slower, less tense lip vibrations for the production o f the lower register are assisted by the air stream striking just short o f the throat (hole) o f the mouthpiece. Thus the striking area for the air stream follows the contour o f the mouthpiece cup, toward the rim to ascend and toward the throat to descend.28
27 Philip Farkas, A Photographic Study o f 40 Virtuoso H om Players ’ Embouchures (Bloomington: Wind Music Inc., 1970), 10-11. 28 Reinhardt, The Encyclopedia o f the Pivot System, 191.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
15 Farkas does not make any correlation between the player’s dental structure and the position o f the mouthpiece. He does admit that “. . . there is no one correct, set way in which a hom player must form his embouchure.. . . There are as many different embouchures as there are players.”29 Another o f the early studies to use photography to study the brass embouchure is by John Haynie. Haynie made the “first attempts at using an image intensifier (fluoroscope) attached to an instant replay videotape recorder.”30 Attention was drawn to specific areas o f technical performance: jaw action, teeth alignment, tongue arch, pivot [tracking], mouthpiece pressure, and tongue position during articulation. X-ray and a video recorder were used to film fourteen performers. Haynie’s findings are as follows: (1) those with an overbite thrust the bottom jaw so as to align the upper and lower teeth, with one subject actually pulling in his jaw; (2) the teeth and jaw aperture open and close for the low and high registers respectively; (3) arching o f the tongue is used to affect the pitch being played; (4) the pivot [tracking] appears as either a change in mouthpiece angle or as a tilting o f the head; (5) mouthpiece pressure increases as one plays higher and louder with all fourteen subjects using more pressure for a C6 when setting for the note than when slurring up to it; and (6) the tongue touches forward in the mouth when articulating low notes and back in the mouth when articulating high
29 Farkas, A Photographic Study, iii. ■>0 John J. Haynie, “A Cinefluorographic (changed to video) Presentation o f the Physiological Phenomena Influencing Trumpet Performance” (Unpublished research report, North Texas State University, 1967), 2.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
16 notes. Haynie also concluded that multiple tongue placements differ when the subject is speaking than when he is playing.31 This discussion o f mechanics undoubtedly provided new information to the world o f brass pedagogy. The findings concerning tongue placement are especially important, while the information concerning tracking provides nothing new other than proof that it is an important function o f brass embouchure. Unfortunately the study includes no observations about mouthpiece placement and dental structure. Admitting that his was not a complete work, Haynie offered it “as a starting point on behalf o f better trumpet pedagogy.”32 Like Haynie, Keith Amstutz studied several aspects o f trumpet playing using photographic techniques. His dissertation, A Videofluorographic Study o f the Teeth Aperture, Instrument Pivot and Tongue Arch and Their Influence on Trumpet Performance, is important for its contribution to instrument pivot [tracking]. While no conclusions are made regarding the interaction o f teeth aperture and mouthpiece placement, Amstutz does help support the “pivot system” as defined by Reinhardt. He points out that: “during trumpet performance the teeth aperture, instrument pivot, and tongue arch function in a consistent manner and have a direct effect on trumpet performance.”33 In addition, he observes: The predicted tendency for instrument pivot was demonstrated by the performance o f the trumpet players in the research. The angle o f inclination between the face o f the mouthpiece and a line determined by the face o f the lower 31 Haynie, “A Cinefluorographic (changed to video) Presentation.” 32 Haynie, “A Cinefluorographic (changed to video) Presentation.” " Amstutz, “A Videofluorographic Study,” 36.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
17 teeth and the base o f the mandible increases as the pitch ascends and decreases as the pitch descends. The natural instrument placement angle for the middle register ranged from parallel to the line between the teeth and mandible to an inclination o f 21 degrees. The average angle o f inclination was eight degrees. There was a marked increase in the degree o f pivot in the upper register over that o f the lower register.34 The observation is not surprising, considering that the face o f the front teeth is generally rounded, and that most o f the population has an overbite. Tracking will generally produce a change in the angle o f the instrument. O f interest in the Amstutz study is a subject for whom the instrument pivot was the reverse o f the anticipated tendency. Amstutz failed to resolve the dilemma and eventually ignored it.35 In 1973, another significant study o f the brass embouchure was undertaken by Daryl Gibson. He used X-ray, cinefluorography, radiography, spectrography, and electromyography to investigate physical changes that take place during trumpet performance. These changes were in the areas o f embouchure, air flow, trumpet angle, and fecial muscle usage.36 After careful analysis, Gibson concluded that: “the hypotheses that there is no measurable embouchure change inside the mouthpiece ring while playing from a Low C to a Double High C can be rejected as a result o f analyzing the data.. . ,”37 Gibson discovered that the lip ratio in the mouthpiece changes depending on the register being played. Furthermore, his measurements o f the change in trumpet angle reinforce Reinhardt’s research, and prove again that a mechanical process takes place in the brass
34 Amstutz, “A Videofluorographic Study,” 41. j5 Amstutz, “A Videofluorographic Study,” 41. 36 Daryl R. Gibson, “A Photographic Study o f Twelve Professional Trumpet Embouchures while Playing from the Low to the Extreme Upper Register” (Ph.D. diss. University o f Minnesota, 1973). 37 Gibson, “A Photographic Study o f Twelve Professional Trumpet Embouchures,” 173.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
18
embouchure. Gibson, however, does not make any correlation between dental structure and mouthpiece placement One final photographic study is that of Walter Myers. In his 1979 dissertation he sought to: “compare photographically upper and lower lip inversion o f two contrasting trumpet embouchure techniques, to determine and compare air flow direction as influenced by these embouchure techniques, and to compare graphically the strength of partial tones . . . as generated by each embouchure system.”38 This study is somewhat confusing because it is difficult to discern the difference between the two embouchure techniques. Myers states that: Two basic embouchure systems appear to have pervaded trumpet performance. One embouchure encouraged more horizontal air flow direction and was characterized and apparently influenced by less upper lip inversion and more upper lip overlap. The other embouchure encouraged downward air flow direction as influenced by less upper lip inversion and more upper lip overlap.39 Both air flow directions are influenced by “less upper lip inversion and more upper lip overlap.” Can this be a misprint? Myers may be trying to further the work done by Robert Weast. In Brass Performance: An Analytical Text of the Physical Processes, Problems and Technique of Brass, Weast defines and makes more sense out o f two embouchure systems: “The more horizontal air stream uses more upper lip inversion and less upper lip overlap, and the less horizontal air stream uses less upper lip inversion and more upper lip overlap.”40
38 Walter J. Myers, “A Photographic, Air Flow Direction, and Sound Spectra Analysis of Two Trumpet Embouchure Techniques” (Doctoral diss., University of Missouri-Kansas City, 1979), ii. 39 Myers, “A Photographic, Air Flow Direction, and Sound Spectra Analysis,” ii. 40 Robert D. Weast, Brass Performance: An Analytical Text of the Physical Processes, Problems and Technique of Brass (New York: McGinnis and Marx, 1962), 36.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
19 After clearing up this possible misprint intended to support Weast, the study by Myers seems to shed new light on embouchure mechanics; however, further analysis proves it to be only a comparison o f upstream and downstream embouchures. Myers observes that “trumpet performers who use more [upper] lip inversion, and who employ more horizontal air flow direction tend to produce partial tones o f greater strength within the tonal spectra o f selected frequencies and intensities.”41 The reason for this is simple: when the upper lip is inverted, there is more lower lip overlap. This puts more lower lip in the mouthpiece than upper lip, creating an upstream embouchure. This, in turn, means there is less upper lip vibrating in the mouthpiece, resulting in a brighter sound.
The Use o f Electromyography to Study Brass Embouchures Two significant studies used an electromyograph to study the brass embouchure. Elmer White and Charles Isley both completed their respective studies in 1972. White’s work sought to determine electromyographic [EMG] potentials (muscle activity) o f certain fecial muscles as well as mouthpiece pressure used during trumpet performance. Measurements were made during performance in different registers and at different volumes. Nine advanced and nine beginning players were administered various tests while EMG potentials were measured. There are no surprises in the statistical information,
41 Myers, “A Photographic, Air Flow Direction, and Sound Spectra Analysis.” ii.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
20
which confirm that more mouthpiece pressure is used while playing in the high register than in the low register.42 No parallels to Reinhardt’s work can be drawn. Isley used electromyographic kinesiology to study the brass embouchure. Like Amstutz (see pp. 16-17 above), Isley observed movement in the embouchure that supports the “pivot [tracking] system.” He notes that: “The higher the tone to be played, the nearer the rim o f the mouthpiece the air is to be directed, whether up or down. In the middle register, the air is directed toward the center o f the mouthpiece.”43 In terms o f mouthpiece placement, Isley draws the following conclusion: “The mouthpiece . . . is centered horizontally opposite the largest part o f the incisal aperture [the distance between the upper and lower incisors].”44 Isley’s study is, therefore, one o f the first attempts (other than Reinhardt’s) to make some correlation between a player’s teeth and mouthpiece placement.
The Instrumentalist: Brass Anthology The Instrumentalist, a publication intended for high school and college band directors, combined all previous articles on the subject o f brass instruments into a book entitled Brass Anthology. This 1969 anthology contains numerous articles on the brass embouchure, three o f which are particularly germane to this study: Douglas Smith’s “The
42 Elmer R. White, “Electromyographic Potentials o f Selected Facial Muscles and Labial Mouthpiece Pressure Measurements in the Embouchure o f Trumpet Players” (Ph.D. diss., Columbia University, 1972). 43 Isley, “A Theory o f Brasswind Embouchure,” 134. 44 Isley, “A Theory o f Brasswind Embouchure,” abstract.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
21
Brass Player’s Pivot,” and Vincent Malek’s “Embouchures o f Professional TrumpetComet Players” and “What About Brass Embouchure?” Although Smith does not discuss mouthpiece placement and dental structure, he does address tracking: “. . . this motion [tracking] can be seen in rank beginners as well as in seasoned professionals, and many who do it well know absolutely nothing about it.”45 He goes on to define the “pivot” as “the tendency o f a brass player’s instrument to tilt slightly up or down when he changes registers.”46 This observation is understandable, since the trumpet tends to look as if it is tilting when the mouthpiece and lips track up and down on the face o f the teeth. Two X-ray photographs are included, but they are small and o f extremely poor quality, and prevent careful analysis or conclusion. In ‘Embouchures o f Professional Trumpet-Comet Players,” Malek classifies the embouchures o f fifty-two professional trumpet players according to lip thickness, eveness o f teeth, jaw position, moist versus dry lips, placement o f the mouthpiece, and shaving. The conclusions drawn are very general and no discussion o f mouthpiece placement or tracking takes place.47 Malek’s “What About Brass Embouchure?” is more detailed, and he again analyzes the physical structure o f the lips, teeth, and jaw. Concerning dental structure he specifically includes the following: Its position [the jaw] when relaxed determines the occlusion or malocclusion o f the teeth. In dental terminology there are several classes o f jaw45 Douglas Smith, “The Brass Player’s Pivot,” Brass Anthology (Evanston: The Instrumentalist, 1969), 450. 46 Smith, “The Brass Player’s Pivot,” 451. 47 Vincent Malek, “Embouchures o f Professional Trumpet-Comet Players,” Brass Anthology (Evanston: The Instrumentalist, 1969), 163.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
22 tooth formations. Mainly, they are: (1) Normal: normal jaw recession, regular teeth. (2) Class I, Neutroclusion: normal jaw recession, irregular teeth. (3) Class H, Distoclusion: marked jaw recession. (4) Class HI, Mesioclusion: protrusion o f the jaw.48 It is interesting that Malek classifies both overbite and underbite but omits even bite altogether. In terms o f mouthpiece placement, he makes no unusual observations; his conclusion is simply that: “serious malformations are incompatible . . . with fine performance on trumpet or comet.”49 Additionally, he draws no significant conclusions on the position o f mouthpiece placement in relation to dental structure, nor does any discussion o f tracking take place.
Central and Lateral Incisors Related to Embouchure Some very interesting studies have been conducted by William Pfund who, for the past thirty years, has studied the relationship o f tooth or teeth position to mouthpiece placement. His conclusions in The Trumpeter’s Pedagogical Guide are simply that it is advantageous to center the mouthpiece over a protrusion or overlap o f the central and/or lateral incisors. He states that a player should: Locate the center o f the malocclusion that best facilitates playing and always consider the protrusive angle o f the teeth. There must be a protrusion for the lip to vibrate efficiently. Frequently the lower jaw’s position must be altered to accommodate this. In the case o f two malocclusions in the same jaw select the position that produces the easiest and most natural sound.50
48 Vincent Malek, “What About Brass Embouchure?” Brass Anthology (Evanston: The Instrumentalist, 1969), 187-188. 49 Malek, “What About Brass Embouchure?” 188. 50 William A. Pfund, The Trumpeter’s Pedagogical Guide (Eaton: William A. Pfund, 1992), 20.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
23 Pfund became interested in this area of study after becoming acquainted with the work of brothers Matthew and Edwin Shiner, both recently deceased. Professors emeriti at Duquesne University in Pittsburgh, the Shiners conducted research that led them to believe that there was a relationship between tooth formation and success in brass performance. Unfortunately, while none of their research was ever published, their work did stimulate similar research by others, including Richard Giangiulio,51 William Lieberman and Robert Jones,52 and Karl Sievers,33 who worked directly with Pfund. By far, the most in-depth study was that of Sievers, who states that “it is possible that there is a relationship between maxillary incisor formation and high register prowess for the trumpet player.”54 He also disagrees with the main school of thought concerning dental structure and efficient brass playing: “Traditional pedagogy states that large, even upper teeth are preferred, with more recent theories preferring almost anything but even upper teeth, suggesting that those whose upper teeth plane possesses a ‘high point’ have the advantage.”53 His theory is based on data gathered from numerous trumpet players at the 1995 International Brassfest in Bloomington, Indiana. This information also led Sievers to conclude that three types of dental formations lend themselves to a more successful upper register. He states that:
51 Richard C. Giangiulio, “The Role of Orthodontics in Correcting Selected Embouchure Problems,” Journal of the International Trumpet Guild (October 1979): 20-21. 52 William B. Lieberman and Robert C. Jones, “Dental Appliances as an Aid to Brass Playing,” The Instrumentalist (October 1971): 52-54. 53 Karl H. Sievers, “Relationship Between Maxillary Incisor Formation, Practice Habits, and High Register Prowess for the Trumpet Player: Insights from Three Perspectives” (Doctoral diss., University of Missouri-Kansas City, 1997). 54 Sievers, “Maxillary Incisor Formation, Practice Habits, and High Register Prowess,” ii. 55 Sievers, “Maxillary Incisor Formation, Practice Habits, and High Register Prowess,” ii-iii.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
24 These three upper incisor arrangements that are thought to enhance success in the upper register are teeth which: (1) have a space between the two upper incisors (and perhaps elsewhere in addition to this space); (2) come to a point at the center junction o f the two upper incisors, teeth may or may not overlap; or (3) are even and without space, but are relatively short vertically.56 Sievers worked closely with William Pfund to discover more information relating mouthpiece placement to dental structure. After an interview with Pfund, Sievers wrote: The guideline in assessing the relationship o f students’ teeth to their trumpet playing is to place the mouthpiece and angle the mouthpiece so as to take advantage o f a high spot in the plane o f the upper teeth if present. As with others who advocate these concepts, he believes that there should be absolutely no concern if such a mouthpiece placement results in an “o f f center” set-up, just so it is not to an extreme, or such that the center o f the lip is outside the mouthpiece. Pfund believes strongly that the advantages o f this concept are undeniable, and that in all cases the trumpeter benefits from employing these concepts. He cautions that without consideration o f other requisites such as correct breathing, correct embouchure, intelligence, correct practice habits and musical ability, focusing on teeth arrangement alone will not yield success.S7 The two articles mentioned above by Giangiulio and Lieberman and Jones lend more insight into why this occlusion o f the central incisors is advantageous. Giangiulio says that “the upper teeth.. . . project the vibrating surface o f the lip forward inside the mouthpiece, enabling the top lip to respond to the air passing over it.” He further concludes that “the ideal position for the upper central incisors is usually in an obtuse angle, whose mildly pointed center is at the front o f the mouth.”58 Lieberman and Jones state that “the upper or maxillary teeth should be
56 Sievers, “Maxillary Incisor Formation, Practice Habits, and High Register Prowess,” 9. 57 Sievers, “Maxillary Incisor Formation, Practice Habits, and High Register Prowess,” 23. 58 Giangiulio, “The Role o f Orthodontics,” 21.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
25 positioned . . . in order that the lip might vibrate freely. . . [and they] note that the mesial labial or the ‘vee’ formed at the midline o f the two upper central incisors would bear the brunt o f any mouthpiece pressure allowing the lateral portions o f the lip to vibrate with more freedom than if the entire surface were flat or in some other equally poor or less comfortable position.”59 The work by the Shiners, along with the publications o f Giangiulio, Lieberman and Jones, Pfund, and Sievers indicate a direct correlation between dental structure and mouthpiece placement. No discussion o f mechanics (i.e., tracking) occurs. The only illustrations used are those in Pfimd’s book, but they are very simple drawings that indicate the proper mouthpiece angle in relation to any overlaps o f the incisors.
Summary o f Literature Review The vast majority o f the related literature seems to agree on three aspects o f the brass embouchure. First is the belief that the position o f the mouthpiece varies for each individual. Second is the conclusion that the airstream splashes toward the throat o f the mouthpiece for lower frequencies and toward the rim for higher frequencies. Third is the idea that a mechanical action takes place in the embouchure when changing registers. All three o f these conclusions support Donald Reinhardt’s research. More interesting, for this study, is the research initiated by the Shiners that produced the notion o f centering the mouthpiece over a protrusion or overlap o f the central and/or lateral incisors.
59 Lieberman and Jones, “Dental Appliances,” 54.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
26 The work by the Shiners, Pfund, Sievers, and others is concerned primarily with the relation between the position o f incisors and mouthpiece placement. Reinhardt’s work is concerned with the relation between dental bite and mouthpiece placement. When comparing the work in both areas, a stimulating question arises. If it is advantageous to center the mouthpiece over a protrusion or overlap o f the central and/or lateral incisors, is it then also advantageous to track from a protrusion or overlap in the upper incisors to one in the lower incisors and vice versa? I f so, this may provide an answer to the question o f tracking at an angle posed earlier in the first chapter.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
CHAPTER THREE PHOTOGRAPHS OF THE DIFFERENT EMBOUCHURE TYPES
Research Procedures As stated earlier, the main purpose o f this study is the compilation o f detailed photographs o f actual trumpet players exhibiting the different embouchure types as described by Donald Reinhardt. Reinhardt’s definitions o f the embouchure type classifications are used, and three sets o f photographs o f each type are provided. With the aid o f lip retractors, the first set shows the dental bite o f each individual (i.e., overbite, underbite, or even bite). With the aid o f an embouchure visualizer, the second set shows the mouthpiece placement o f each individual. Finally, the third set shows the tracking used by each individual, accomplished with three separate photographs o f each individual playing the concert pitches o f B-flat 3, B-flat 4, and B-flat 5 on his or her instrument. It is intended for these detailed photographs to lead to insights and answers to the following questions (mentioned previously): Why do individuals with perfectly even dental bites use an extreme mouthpiece placement? Why do some individuals track up to ascend while others track down to ascend? The third question, which may already have been answered after the review o f the related literature, is why do many brass players track at an angle and not in a perfectly vertical line?
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
28 Types I and IA “Types I and IA are rare in that they possess perfectly even teeth, upper and lower, meeting flush when the lower jaw is in its natural position.. . . The oddity o f the two Type I groups . . . is the fact that they must either place their mouthpieces very high on their upper lips (Type I), or very low on their lower lips (Type IA). It seems that anything resembling a half and half placement never works out for either o f these types.. . . Type I places the mouthpiece with more on the upper lip than on the lower.. . . Type I may come trader either o f the two PIVOT CLASSIFICATIONS [see pp. 10-11 above], . . . Type IA places the mouthpiece more on the lower lip than on the upper.. . . Generally speaking, the Type IA comes under PIVOT CLASSIFICATION TWO [see pp. 10-11 above].. . -”60
60 Reinhardt, The Encyclopedia o f the Pivot System, 204-205.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
29
Figure 1. Front View o f a Type I Dental Structure (Even Bite) Note: Upper and lower teeth meet flush when the lower jaw is in its natural position.
Figure 2. Right View o f a Type I Dental Structure (Even Bite) Note: Upper and lower teeth meet flush when the lower jaw is in its natural position.
Figure 3. Left View o f a Type I Dental Structure (Even Bite) Note: Upper and lower teeth meet flush when the lower jaw is in its natural position.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
30
Figure 4. View o f a Type I Dental Structure (Maxillary Incisors) Note: In this subject’s case, no malocclusion exists between any incisors o f the top teeth.
Figure 5. View o f a Type I Dental Structure (Mandible Incisors) Note: In this subject’s case, no substantial malocclusion exists between any incisors o f the lower teeth.
Figure 6. View o f the Mouthpiece Placement o f a Downstream, Type I Embouchure Note: In this subject’s case, no substantial malocclusions exist between the incisors o f the top teeth, so the mouthpiece is placed in the center horizontally.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
Figure 7. View o f a Type I Embouchure Playing C4 (Concert B-flat 3) Note: This embouchure type may come under either o f the two pivot classifications (see pp. 10-11 above).
Figure 8. View o f a Type I Embouchure Playing C5 (Concert B-flat 4) Note: This particular subject tracks down to ascend.
Figure 9. View o f a Type I Embouchure Playing C6 (Concert B-flat 5) Note: This subject tracks straight down to ascend with no lateral movement o f the jaw.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
32 Even though the subject in the preceding photographs (Type I) has a significant amount o f upper lip in the mouthpiece, he plays with a surprisingly bright tone quality. He also plays in the upper register easily, but he has some trouble in the lower register. Mouthpiece placement may have something to do with this. The subject’s airstream exits rather close to the mouthpiece rim, facilitating the upper register but making the lower register more difficult to obtain.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
33
Figure 10. Front View o f a Type IA Dental Structure (Even Bite) Note: Upper and lower teeth meet flush when the lower jaw is in its natural position.
Figure 11. Right View o f a Type IA Dental Structure (Even Bite) Note: Upper and lower teeth meet flush when the lower jaw is in its natural position.
Figure 12. Left View o f a Type IA Dental Structure (Even Bite) Note: Upper and lower teeth meet flush when the lower jaw is in its natural position.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
34
Figure 13. View o f a Type IA Dental Structure (Maxillary Incisors) Note: A substantial malocclusion exists between the right central and right lateral incisors.
Figure 14. View o f a Type IA Dental Structure (Mandible Incisors) Note: A small malocclusion exists between the left central and left lateral incisors.
Figure 15. View o f the Mouthpiece Placement o f an Upstream, Type IA Embouchure Note: In this subject’s case, the mouthpiece is placed to the right o f center, taking advantage o f the malocclusion that exists between the right central and right lateral incisors o f the top teeth.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
Figure 16. View o f a Type IA Embouchure Playing C4
Figure 17. View o f a Type IA Embouchure Playing C5 Note: This embouchure type tracks down to ascend.
Figure 18. View o f a Type IA Embouchure Playing C6 Note: This subject tracks down and to the left to ascend while the jaw moves to the right. This may be because o f the small malocclusion that exists between the subject’s left central and left lateral incisors o f the lower teeth.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
36 The subject in the preceding photographs (Type IA) plays with an extremely bright sound. He also has difficulty playing in the upper register. The Type IA sets the mouthpiece rim so low on the top lip that it has a tendency to come into contact with the vibrating area. This is especially noticeable when ascending into the upper register. As the Type IA tracks down to ascend, the mouthpiece can accidentally slide down on the top lip causing the rim to interfere with the vibration. The sliding may be minute, but it can be enough to impede the vibration entirely. Playing with a dry top lip helps this embouchure type tremendously.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
37 Types II and HA “Types H and DA possess lower teeth which protrude beyond their uppers while their lower jaws are reposed in their natural positions.. . . Type II places the mouthpiece more on the lower lip than on the upper; generally with the lower jaw protruded even more during the playing than when in its natural position.. . . The Type II generally utilizes PIVOT CLASSIFICATION TWO [see pp. 10-11 above]
Type HA also
places the mouthpiece more on the lower lip than on the upper, but the lower jaw is receded beneath the upper during the playing. The Type HA, with few exceptions, comes under PIVOT CLASSIFICATION TWO [see pp. 10-11 above].”61
61 Reinhardt, The Encyclopedia o f the Pivot System, 206-207.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
38
Figure 19. Front View o f a Type II Dental Structure (Underbite) Note: Lower teeth protrude beyond upper when the lower jaw is in its natural position.
Figure 20. Right View o f a Type II Dental Structure (Underbite) Note: Lower teeth protrude beyond upper when the lower jaw is in its natural position.
Figure 21. Left View o f a Type II Dental Structure (Underbite) Note: Lower teeth protrude beyond upper when the lower jaw is in its natural position.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
39
Figure 22. View o f a Type H Dental Structure (Maxillary Incisors) Note: In this subject’s case, a substantial malocclusion exists between the central incisors and between the left central and left lateral incisors o f the top teeth.
Figure 23. View o f a Type II Dental Structure (Mandible Incisors) Note: No substantial malocclusion exists between any o f the incisors o f the lower teeth.
Figure 24. View o f the Mouthpiece Placement o f an Upstream, Type II Embouchure Note: In this subject’s case, the mouthpiece is placed in the center horizontally, taking advantage o f the malocclusion that exists between the central incisors o f the top teeth.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
Figure 25. View o f a Type II Embouchure Playing C4
Figure 26. View o f a Type II Embouchure Playing C5 Note: This embouchure type tracks down to ascend.
Figure 27. View of a Type II Embouchure Playing C6 Note: This subject tracks straight down to ascend with no lateral movement o f the jaw.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
41 The subject in the preceding photographs (Type II) plays with a bright sound, but he plays in the upper register with relative ease. This may be because he uses approximately 1/3 top lip and 2/3 bottom lip in the mouthpiece.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
Figure 28. Front View o f a Type DA Dental Structure (Underbite) Note: Lower teeth protrude beyond upper when the lower jaw is in its natural position.
Figure 29. Right View o f a Type DA Dental Structure (Underbite) Note: Lower teeth protrude beyond upper when the lower jaw is in its natural position.
Figure 30. Left View o f a Type HA Dental Structure (Underbite) Note: Lower teeth protrude beyond upper when the lower jaw is in its natural position.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
43
Figure 31. View o f a Type DA Dental Structure (Maxillary Incisors) Note: A substantial malocclusion exists between the right central and right lateral incisors.
Figure 32. View o f a Type HA Dental Structure (Mandible Incisors) Note: A small malocclusion exists between both the right incisors and the left incisors.
Figure 33. View o f the Mouthpiece Placement of an Upstream, Type HA Embouchure Note: In this subject’s case, the mouthpiece is placed in the center horizontally. The substantial malocclusion between the right incisors o f the top teeth may not be usable because the position o f the right canine tooth is too far forward.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
44
Figure 34. View o f a Type DA Embouchure Playing C4
Figure 35. View o f a Type DA Embouchure Playing C5 Note: This embouchure type tracks down to ascend.
Figure 36. View o f a Type DA Embouchure Playing C6 Note: This subject tracks down and to the left to ascend while the jaw moves to the right. This may be because o f the small malocclusion that exists between the subject’s left central and left lateral incisors o f the lower teeth.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
45 The subject in the preceding photographs (Type HA) plays with a fairly bright sound. He has a mediocre upper register, possibly because o f the poor position o f the central incisors o f the top teeth.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
46 Types III. IDA and HIB “Much more common are the Types HI, ITTA. and II1B which all possess lower teeth that recede beneath the upper while their jaws are in their natural positions.. . . Type m . . . places the mouthpiece more on the upper lip than on the lower. . . . Type HI is very common among trombone performers, and can be recognized by the downward tilt o f the instrument angle.. . . In most cases the Type III utilizes PIVOT CLASSIFICATION TWO [see pp. 10-11 above]. Type m A , often called the ‘High Type IIP, places the mouthpiece with much more upper lip than lower. . . . The Type IHA must observe the rules as presented in PIVOT CLASSIFICATION ONE [see pp. 10-11 above]. Type HIB...places the mouthpiece not so high on the upper lip as the High Type HI (Type IHA). . . . Type
I1JLB
must observe the rules as presented in PIVOT CLASSIFICATION TWO [see pp. 10-11 above].”62
62 Reinhardt, The Encyclopedia o f the Pivot System, 207-209.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
47
Figure 37. Front View o f a Type III Dental Structure (Overbite) Note: Lower teeth recede beneath the upper teeth when the jaw is in its natural position.
Figure 38. Right View o f a Type IE Dental Structure (Overbite) Note: Lower teeth recede beneath the upper teeth when the jaw is in its natural position.
Figure 39. Left View o f a Type III Dental Structure (Overbite) Note: Lower teeth recede beneath the upper teeth when the jaw is in its natural position.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
48
Figure 40. View o f a Type EH Dental Structure (Maxillary Incisors) Note: A substantial malocclusion exists between the central incisors o f the top teeth.
Figure 41. View o f a Type HI Dental Structure (Mandible Incisors) Note: In this subject’s case, a very small malocclusion exists between the left central and left lateral incisors o f the lower teeth.
Figure 42. View o f the Mouthpiece Placement o f a Downstream, Type HI Embouchure Note: In this subject’s case, the mouthpiece is placed in the center horizontally, taking advantage o f the malocclusion that exists between the central incisors o f the top teeth.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
49
Figure 43. View o f a Type III Embouchure Playing C4 Note: This type can be recognized by the downward tilt o f the instrument angle.
Figure 44. View o f a Type III Embouchure Playing C5 Note: This embouchure type tracks down to ascend.
Figure 4 5 . View o f a Type i n Embouchure Playing C 6 Note: This subject tracks down and to the left to ascend while the jaw moves to the right. This may be because o f the small malocclusion that exists between the subject’s left central and left lateral incisors o f the lower teeth.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
50 The subject in the preceding photographs (Type HI) plays with a fairly dark sound. Her lower teeth recede a fair distance beneath the upper teeth creating a downward instrument angle, but she still plays surprisingly well.
Reproduced with permission o f the copyright owner. Further reproduction prohibited without permission.
51
Figure 46. Front View o f a Type IHA Dental Structure (Overbite) Note: Lower teeth recede beneath the upper teeth when the jaw is in its natural position.
Figure 47. Right View o f a Type EIA Dental Structure (Overbite) Note: Lower teeth recede beneath the upper teeth when the jaw is in its natural position.
Figure 48. Left View o f a Type EHA Dental Structure (Overbite) Note: Lower teeth recede beneath the upper teeth when the jaw is in its natural position.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
52
Figure 49. View o f a Type IHA Dental Structure (Maxillary Incisors) Note: In this subject’s case, no malocclusion exists between any incisors o f the top t«eth.
Figure 50. View o f a Type IHA Dental Structure (Mandible Incisors) Note: No substantial malocclusion exists between any o f the incisors o f the lower te=eth.
Figure 51. View o f the Mouthpiece Placement o f a Downstream, Type IHA Embouclhure Note: In this subject’s case, no substantial malocclusions exist between the incisors o f the top teeth, so the mouthpiece is placed in the center horizontally.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
Figure 52. View o f a Type IHA Embouchure Playing C4
Figure 53. View o f a Type EDA Embouchure Playing C5 Note: This embouchure type tracks up to ascend.
Figure 54. View o f a Type HLA Embouchure Playing C6 Note: This subject tracks straight up to ascend with no lateral movement o f the jaw.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
54 The subject in the preceding photographs (Type IDA) plays with a very brilliant sound. He also has tremendous power in the upper register—something that seems to be quite common for the Type IHA.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
55
Figure 55. Front View o f a Type 111B Dental Structure (Overbite) Note: Lower teeth recede beneath the upper teeth when the jaw is in its natural position.
Figure 56. Right View o f a Type lllB Dental Structure (Overbite) Note: Lower teeth recede beneath the upper teeth when the jaw is in its natural position.
Figure 57. Left View o f a Type HIB Dental Structure (Overbite) Note: Lower teeth recede beneath the upper teeth when the jaw is in its natural position.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
56
Figure 58. View o f a Type HEB Dental Structure (Maxillary Incisors) Note: Substantial malocclusions exist between the central and lateral incisors.
Figure 59. View o f a Type HIB Dental Structure (Mandible Incisors) Note: A substantial malocclusion exists between the central incisors.
Figure 60. View o f the Mouthpiece Placement o f a Downstream, Type HIB Embouchure Note: In this subject’s case, the mouthpiece is placed in the center horizontally. The substantial malocclusions between the central and lateral incisors o f the top teeth may not be usable because the positions o f the canine teeth are too far forward.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
Figure 61. View o f a Type DIB Embouchure Playing C4
Figure 62. View o f a Type EEB Embouchure Playing C5 Note: This embouchure type tracks down to ascend.
Figure 63. View o f a Type DIB Embouchure Playing C6 Note: This subject tracks down and to the right to ascend while the jaw moves to the This may be because o f the substantial malocclusion that exists between the subject’s central incisors o f the lower teeth.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
58 The subject in the preceding photographs (Type HIB) plays with a brilliant sound, and he has a moderately good high register. The most common trumpet embouchure is the Type BIB.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
59 Types IV and IVA “Types IV and IVA possess lower teeth which recede beneath the uppers while their lower jaws are in their natural positions.. . . The embouchure and jaw Type IV . . . places the mouthpiece with more lower lip than upper.. . . Type IV in almost all cases utilizes PIVOT CLASSIFICATION TWO [see pp. 10-11 above]. The Type IVA, often called the ‘Down Type IV’, places the mouthpiece with more lower than upper, but with the lower jaw receded beneath the upper during the playing.. . . Type IVA must observe all rules presented in PIVOT CLASSIFICATION TWO [see pp. 10-11 above].”63
63 Reinhardt, The Encyclopedia o f the Pivot System, 209-210.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
Figure 64. Front View o f a Type IV Dental Structure (Overbite) Note: Lower teeth recede beneath the upper when the lower jaw is in its natural position.
Figure 65. Right View o f a Type IV Dental Structure (Overbite) Note: Lower teeth recede beneath the upper when the lower jaw is in its natural position.
Figure 66. Left View o f a Type IV Dental Structure (Overbite) Note: Lower teeth recede beneath the upper when the lower jaw is in its natural position.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
61
Figure 67. View o f a Type IV Dental Structure (Maxillary Incisors) Note: A malocclusion exists between the central incisors o f the top teeth.
Figure 68. View o f a Type IV Dental Structure (Mandible Incisors) Note: In this subject’s case, malocclusions exist between the central incisors and also between the left central and left lateral incisors o f the lower teeth.
Figure 69. View o f the Mouthpiece Placement o f an Upstream, Type IV Embouchure Note: In this subject’s case, the mouthpiece is placed in the center horizontally, taking advantage o f the malocclusion that exists between the central incisors o f the top teeth.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
62
Figure 70. View o f a Type IV Embouchure Playing C4
Figure 71. View o f a Type IV Embouchure Playing C5 Note: This embouchure type tracks down to ascend.
Figure 72. View o f a Type IV Embouchure Playing C6 Note: This subject tracks down and to the right to ascend while the jaw moves to the left. This may be because o f the more significant m alocclusion that exists between the subject’s central incisors o f the lower teeth.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
63 The subject in the preceding photographs (Type IV) plays with a bright sound, and he has sound production problems at times. Even though his lower teeth recede beneath the upper teeth while the lower jaw is in its natural position, he thrusts his bottom jaw out when playing, creating an upward instrument angle. This causes him to have to hold the instrument up higher than the average player. He compensates for this by tilting his head down—possibly causing a constriction at the throat.
Reproduced with permission o f the copyright owner. Further reproduction prohibited without permission.
64
Figure 73. Frotit View o f a Type IVA Dental Structure (Overbite) Note: Lower teeth recede beneath the upper when the lower jaw is in its natural position.
Figure 74. Right View o f a Type IVA Dental Structure (Overbite) Note: Lower teeth recede beneath the upper when the lower jaw is in its natural position.
Figure 75. Left View o f a Type IVA Dental Structure (Overbite) Note: Lower teeth recede beneath the upper when the lower jaw is in its natural position.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
65
Figure 76. View" o f a Type IVA Dental Structure (Maxillary Incisors) Note: In this subject’s case, no malocclusion exists between any incisors o f the top teeth.
Figure 77. View o f a Type IVA Dental Structure (Mandible Incisors) Note: In this subject’s case, small malocclusions exist between the left central and left lateral incisors and also between the right central and right lateral incisors.
Figure 78. View o f the Mouthpiece Placement o f an Upstream, Type IVA Embouchure Note: In this subject’s case, no substantial malocclusions exist between the incisors o f the top teeth, so the mouthpiece is placed in the center horizontally.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
Figure 79. View o f a Type IVA Embouchure Playing C4
n
Figure 80. View o f a Type IVA Embouchure Playing C5 Note: This embouchure type tracks down to ascend.
Figure 81. View o f a Type IVA Embouchure Playing C6 Note: This subject tracks down and to the left to ascend while the jaw moves to the right. This may be because o f the more easily accessed malocclusion that exists between the subject’s left central and left lateral incisors o f the lower teeth.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
67 The subject in the preceding photographs (Type IVA) plays with a fairly bright sound. She has a mediocre upper register, much like the subject in the Type IIA photographs.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
CHAPTER FOUR SUMMARY
The photographs in the previous chapter clarify Reinhart’s work and provide new insights into understanding the brass embouchure: they clearly show that all embouchure types are either upstream or downstream; that dental bite generally affects mouthpiece placement but does not necessarily affect tracking; and finally, that the position o f the central and lateral incisors affects both mouthpiece placement and tracking.
Upstream and Downstream Embouchures According to Reinhardt, all embouchure types are either upstream or downstream.64 Although there are some disagreements with this, the photographs in Chapter Three tend to support Reinhardt: . . . if the performer’s mouthpiece placement utilizes more upper than lower lip, then his upper lip will predominate into the cup o f the mouthpiece during the playing. Thus his air stream will strike into the mouthpiece cup in a downward direction (toward his chin) at varying angles according to the register being played.. . . When the performer’s mouthpiece placement utilizes more lower than upper lip, then his lower lip predominates during the playing. Consequently his air stream strikes into the mouthpiece cup in an upward direction (toward his nose) again at varying angles according to the register.63
64 The author knows of several studies that may contradict Reinhardt’s theory on the existence of upstream players; however, these studies have not been significant enough to prove or disprove Reinhardt. 65 Reinhardt, The Encyclopedia o f the Pivot System, 191.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
69 One o f the strongest opponents o f this theory was Vincent Bach, who truly believed that he played the trumpet using an airstream that was sent directly into the throat o f the mouthpiece: Bach told him [Reinhardt] that he did not play either downstream or upstream, but delivered his vibrations directly into the throat o f the mouthpiece. After lunch, Reinhardt produced a transparent mouthpiece and a pocket flashlight and asked Bach to play in it, with [George] Bundy as a witness.. . . Upon examining Bach playing the mouthpiece, Bundy declared, “Vincent, even I can see that you are playing downstream.”66 Dental bite directly affects mouthpiece placement because it causes one lip to predominate into the cup o f the mouthpiece. This is easily seen in the photographs o f the Type IH, IEA, and LLIB embouchures. Because these players have overbites, the top lip extends farther into the mouthpiece than the bottom lip. This directs the airstream in a downward manner, and it splashes into the bottom o f the cup. The player is naturally inclined to use more top lip than bottom lip in the mouthpiece to insure that the airstream always splashes below the throat o f the mouthpiece. The same holds true for the Type E and EA embouchures. Because these players have underbites, the bottom lip extends farther into the mouthpiece than the top lip. This directs the airstream in an upward manner, and it splashes into the top o f the cup. This type o f player is naturally inclined to use more bottom lip than top lip in the mouthpiece to insure that the airstream always splashes above the throat o f the mouthpiece.
66 Ralph Dudgeon, “Credit Where Credit is Due: The Life and Brass Teaching o f Donald S. Reinhardt,” Journal o f the International Trumpet Guild (June 2000): 35.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
70 The airstream must splash into the cup o f the mouthpiece for quality sound production; because this is the case, individuals with even dental bites (Types I and IA) need to use an extreme mouthpiece placement. The airstream o f the person with an even dental structure has a tendency to exit in a perpendicular manner. With a mouthpiece placement anywhere close to half top and half bottom lip, the airstream is usually sent directly—perpendicularly—into the throat o f the mouthpiece, and accordingly, no sound is produced. Significantly offsetting the mouthpiece placement allows the airstream to splash into the cup o f the mouthpiece, either above or below the throat.
Oddity o f Type IV and IVA Embouchures Type IV and IVA embouchures are odd in that the player has a natural overbite but plays as if he had an underbite. This seems contradictory, but a closer look at the angle o f the central incisors o f both the top and bottom teeth may provide an explanation. If the central incisors o f the bottom teeth angle forward far enough, they can cause the bottom lip to extend as far into the mouthpiece as the top lip, possibly creating the same problem that players with Type I and IA embouchures have to deal with—an airstream directed straight into the throat o f the mouthpiece. The solution for them would then be to thrust out the bottom jaw and play as an upstream player (see figures 82-83).
Reproduced with permission o f the copyright owner. Further reproduction prohibited without permission.
Figure 82. (fig. 66 repeated). Left View o f a Type IV Dental Structure (Overbite) Note: The central incisors o f the lower teeth angle forward and possibly affect how the bottom lip protrudes into the mouthpiece.
Figure 83. (fig. 69 repeated). View o f the Mouthpiece Placement o f an Upstream, Type IV Embouchure Note: Even though this person has a natural overbite, he plays as if he had an underbite. This may be caused by the protruding central incisors o f the lower teeth.
If the central incisors o f the top teeth angle backward far enough, the top lip may not protrude as far into the mouthpiece as the bottom lip. Therefore, the player would almost certainly have to play upstream (see figures 84-85).
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
72
Figure 84. (fig. 76 repeated). View o f a Type IVA Dental Structure (Maxillary Incisors) Note: The central incisors angle backward and possibly affect how the top lip protrudes into the mouthpiece.
Figure 85. (fig. 78 repeated). View o f the mouthpiece Placement o f an Upstream, Type IVA Embouchure Note: Even though this person has a natural overbite, she plays as if she had an underbite. This may be caused by the backward sloping o f the central incisors o f the upper teeth.
Tracking and Mouthpiece Placement While dental bite does seem to affect mouthpiece placement, it does not necessarily affect tracking. A common assumption is that upstream players track up to ascend while downstream players track down to ascend, in spite o f the fact that nothing could be further from the truth. All upstream players track down to ascend while
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
73 downstream players fell under both pivot classifications (see pp. 10-11 above) depending on their specific embouchure types. Further study is needed to determine why some downstream players track up when ascending while others track down when ascending. It is interesting to note that some Type I embouchures use Pivot Classification One while others use Pivot Classification Two (see pp. 10-11 above). This means that instead o f nine embouchure types there are really ten. The research initiated by the Shiners and furthered by Pfimd and Sievers produced the notion o f centering the mouthpiece over a malocclusion o f the central and/or lateral incisors o f the top teeth. This too seems to be supported by the photographs in Chapter Three. The only possible exception might be the Type II example. This particular player has a substantial malocclusion between the right central and right lateral incisors o f the top teeth, yet the mouthpiece placement is in the center horizontally (see figures 86-87).
Figure 86. (fig. 31 repeated). View o f a Type DA Dental Structure (Maxillary Incisors) Note: In this subject’s case, a substantial malocclusion exists between the right central and right lateral incisors o f the top teeth.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
Figure 87. (fig. 33 repeated). View o f the Mouthpiece Placement o f an Upstream, Type HA Embouchure Note: In this subject’s case, the mouthpiece is placed in the center horizontally. The substantial malocclusion between the right incisors o f the top teeth does not seem to affect mouthpiece placement.
This example seems to debunk the research o f the Shiners, Pfimd and Sievers, but closer study o f Pfimd’s work provides an explanation. While it is advantageous to have a malocclusion between two teeth, by contrast, the worst possible scenario is one in which two malocclusions exist on either side o f the same tooth,67 as illustrated in Figure 86. A substantial malocclusion exists between the right central and right lateral incisors, but there is also a substantial malocclusion between the right lateral incisor and the right canine tooth. Trying to place the mouthpiece to the right o f center would undoubtedly produce negative results. Finally, the photographs in Chapter Three seem to provide new insights into the mechanics o f the embouchure. They seem to indicate that it is advantageous to track from the protrusion o f the upper incisors to the protrusion o f the lower incisors, or from the
67 Pfimd, The Trumpeter’s Pedagogical Guide, 19-20.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
protrusion o f the lower incisors to the protrusion o f the upper incisors. In every case, a player with a usable malocclusion (even if slight) tracked to the one most forward in his dental structure. Those players without any significant malocclusion tracked straight up and down.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
SELECTED BIBLIOGRAPHY
Books Autrey, Byron L. Basic Guide to Trumpet Playing. Chicago: M. M. Cole, 1963. Bach, Vincent. The Art o f Trumpet Playing. Elkhart: Vincent Bach Corp., 1969. Bailey, Wayne, Patrick Miles, Alan Siebert, William Stanley, and Thomas Stein. Teaching Brass: A Resource Manual. New York: McGraw-Hill, Inc., 1992. Barbour, J. Murray. Trumpets, Horns and Music. East Lansing: Michigan State University Press, 1963. Bate, Philip. The Trumpet and Trombone. N ew York: Norton Publishers, 1996. Bellamah, Joseph L. Brass Facts, A Survey o f Teaching and Playing Methods o f Leading Brass Authorities. 3d ed. San Antonio: Southern Music Co., 1961. ________ . A Trumpeter’s Treasury o f Information. San Antonio: Southern Music Co., 1969. Bendinelli, Gesare. The Entire Art o f Trumpet Playing. Translated by Edward H. Tarr. Nashville: The Brass Press, 1975. Brisbois, Bud. Trumpet Today. Hollywood: Highland Music Co., 1964. Bush, Irving R. Artistic Trumpet Technique and Study. Hollywood: Highland Music Co., 1962. Callet, Jerome. Brass Power and Endurance. Plainview: Harold Branch Publishing Co., 1974. ________ . Trumpet Yoga. New York: Charles Colin Publishers, 1971. ________ . Twenty-First Century Trumpet Technique. Plainview: Harold Branch Publishing Co., n.d.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
77 Caruso, Carmine. Musical Calisthenics fo r Brass. New York: Almo Publications, 1979. Caruso, C., Hall Graham, and Shelton Booth. Caruso Band Method. New York: Samuel French Publications, 1969. Clarke, Herbert L. Characteristic Studies fo r the Comet. New York: Carl Fischer, 1934. ________ . Technical Studies fo r the Comet. New York: Carl Fischer, 1934. Colin, Charles. Advanced Lip Flexibilities fo r the Trumpet. New York: Charles Colin, 1980. ________ . The Brass Player. New York: Charles Colin, 1972. ________ . The Charles Colin Complete Methodfo r Modem Trumpet and Comet. New York: Charles Colin, 1964. ________ . Lip Flexibilities fo r the Trumpet. New York: Charles Colin, n.d. ________ . Vital Brass Notes. New York: Charles Colin, 1967. Colin, Charles, and Mel Broiles. The Art o f Trumpet Playing. New York: Charles Colin, 1967. Costello. Embouchure Technique. New York: Colin Publishers, 1972. Cramer, William. “Embouchure Control and Development.” Brass Anthology. Evanston: The Instrumentalist, 1969. Dale, Delbert A. Trumpet Technique. London: Oxford University Press, 1965. D’ath, Norman. Comet Playing. London: Boosey and Hawkes, 1960. Davidson, Louis. Trumpet Profiles. Bloomington: Louis Davidson, 1975. ________ . Trumpet Techniques. Rochester: Wind Music, Inc., 1974. De Lamater, E. Lip Science fo r Brass Players. Chicago: Rubank, 1923. ________ . The Extended Trumpet Range. New York: Charles Colin, 1975. Endsley, Gerald. Volume I fo r Trumpet. Denver: Tromba Publications, 1972.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
78 Farkas, Philip. The Art o f Brass Playing. Bloomington: Brass Publications, 1962. ________ . A Photographic Study o f 40 Virtuoso Horn Players ’ Embouchures. Bloomington: Wind Music, Inc., 1970. Faulkner, Maurice. “Diagnosing Embouchure Problems.” Brass Anthology. Evanston: The Instrumentalist, 1969. Fox, Fred. Essentials o f Brass Playing. Los Angeles: Anderson, Ritchie, and Simon, 1974. Frederiksen, Brian. Arnold Jacobs: Song and Wind. Edited by John Taylor. USA: WindSong Press Limited, 1996. Gibson, Daryl J. A Textbookfo r Trumpet. New Brighton: Daryl Gibson, 1962. Gordon, Claude. Daily Trumpet Routines. New York: Carl Fischer, 1975. ________ . How to Practice to Develop Your High and Low Ranges. n.p., n.d. ________ . Physical Approach to Elementary Brass Playing. New York: Carl Fischer, 1977. ________ . Systematic Approach to Daily Practice fo r Trumpet. New York: Carl Fischer, 1968. Grocock, Robert. Advanced Method fo r Trumpet. Greencastle: Argee Music Press, 1968. Hanson, Fay. Brass Playing, Mechanism and Technique. New York: Carl Fischer, 1968. ________ . Brass Playing. 2d ed. N ew York: Carl Fischer, 1975. Haynie, John. Development and Maintenance o f Techniques fo r All Brass Instruments in Treble Clef New York: Charles Colin, n.d. Hickman, David. Trumpet Lessons with David Hickman. Vol. 1, Tone Production. Denver: Tromba Publications, 1989. ________ . Trumpet Lessons with David Hickman. Vol. 2, Embouchure Formation and Warming Up. Denver: Tromba Publications, n.d. ________ . Trumpet Lessons with David Hickman. Vol. 3, Embouchure Development: Power, Endurance, Upper Register. Denver: Tromba Publications, n.d.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
79 Hitchcock, Willis E. Lip Science fo r Brass Players. Chicago: Willis Hitchcock, 1922. Hunt, Norman, and Dan Bachelder. Guide to Teaching Brass. 5th ed. Madison: WCB Brown & Benchmark, 1994. Jacome, Saint. Grand Methodfor Trumpet o f Comet. New York: Carl Fischer, 1938. James, Harry. Harry James Trumpet Method. New York: Robbins Music Corp., 1969. Johnson, Keith. The Art o f Trumpet Playing. Ames: Iowa State University Press, 1981. Kleinhammer, Edward. The Art o f Trombone Playing. Evanston: Summy-Birchard, 1963. Leidig, Vernon F. Contemporary Brass Technique. Hollywood: Highland Music Co., 1960. Little, Lowell. Embouchure Builder fo r Trumpet. New York: Pro Art, 1954. Liva, Howard. “How to Develop Upper Brass Range.” Brass Anthology. Evanston: The Instrumentalist, 1969. Maggio, Louis. The Original Louis Maggio System fo r Brass. Revised by Carlton MacBeth. North Hollywood: MacBeth, 1968. Malek, Vincent. “Embouchures o f Professional Trumpet-Comet Players.” Brass Anthology. Evanston: The Instrumentalist, 1969. ________ . “What About Brass Embouchure?” Brass Anthology. Evanston: The Instrumentalist, 1969. Mendez, Rafael. Prelude to Brass Playing. Boston: Carl Fischer, 1961. Miller, Thomas. “Developing the Trumpet Embouchure.” Brass Anthology. Evanston: The Instrumentalist, 1969. Moore, E. C. The Brass Book. Revised by James Neilson. Kenosha: Leblanc Publications, Inc., 1964. Mueller, Herbert C. Learning to Teach Through Playing: A Brass Method. Ithaca: Addison-Wesley Publishing Co. Inc., 1968. Noble, Clyde E. The Psychology o f Comet and Trumpet Playing. Missoula: Clyde D. Noble, 1964.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
80
Olson, R. Dale. “Extended Trumpet Range.” Brass Anthology. Evanston: The Instrumentalist, 1969. Peterson, O. A. The Comet. New York: Walter Jacobs, 1957. Pfimd, William A. The Trumpeter’s Pedagogical Guide. Eaton: William A. Pfimd, 1992. Porter, Maurice M. The Embouchure. London: Boosey and Hawkes, 1967. Reinhardt, Donald S. The Encyclopedia o f the Pivot System fo r all Cupped Mouthpiece Brass Instruments: A Scientific Text. New York: Charles Colin, 1964. ________ . The Encyclopedia o f the Pivot System for all Cupped Mouthpiece Brass Instruments: A Scientific Text. Augmented version. New York: Charles Colin, 1973. ________ . DonaldS. Reinhardt’s Pivot System fo r Trumpet: A Complete Manual with Studies. Bryn Mawr: Elkan-Vogel, Inc., 1942. ________ . Trumpet Mechanisms: A Complete, Practical, Time-saving School o f Technique Designed to Meet the Ever-increasing Instrumental Demands o f Modem Music. New York: Gomston, 1945. ________ . Trumpet Mechanisms: A Streamlined School o f Technique Designed to Meet the Ever-increasing Instrumental Demands o f Modem Music. New York: Leeds Music Corp., 1946. Schlossberg, Max. Daily Drills and Technical Studies fo r Trumpet. New York: M. Baron Co., 1965. Smith, Douglas. “The Brass Player’s Pivot.” Brass Anthology. Evanston: The Instrumentalist, 1969. Smith, Walter L. Lip Flexibilities on the Comet or Trumpet. New York: Carl Fischer, 1935. Spaulding, Roger W. Double High C in 37 Weeks. Revised edition. Hollywood: High Note Studios, 1968. Stevens, Roy. Embouchure Self Analysis and the Stevens-Costello Triple C Embouchure Technique. New York: Harold Branch Publishers, Inc., 1971.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
81
________ . The Stevens-Costello Triple High C Embouchure Technique. New Y ork: The Stevens-Costello Embouchure Clinic, 1971. Stewart, M. Dee, ed. Arnold Jacobs: The Legacy o f a Master. Northfield: The Instrumentalist Publishing Co., 1987. Sweeney, Leslie. Teaching Techniquesfo r the Brasses. New York: Belwin, 19531. Wean, Ellis. L - S Music Innovations: TRU - VU Transparent Mouthpieces O w n e r’s Manual. Montreal: L -S Music Innovations, 1987. Weast, Robert D. Brass Performance: An Analytical Text o f the Physical Processses, Problems and Technique o f Brass. New York: McGinnis and Marx, 1962!. ________ . Keys to Natural Performance for Brass Players. Des Moines: The Brrass World, 1979. ________ . “The Development o f the Upper Register.” Brass Anthology. Evanstc»n: The Instrumentalist, 1969. ________ . “A Stroboscopic Analysis o f Lip Function.” Brass Anthology. Evanstcon: The Instrumentalist, 1969. Whitener, Scott. A Complete Guide to Brass: Instruments and Pedagogy. N ew "Work: Schirmer Books, 1990. Williams, Ernest. The Secret o f Technique Preservation fo r Trumpeters and Cormetists. New York: Charles Colin, 1946. Winslow, R. W., and J. E. Green. Playing and Teaching Brass Instruments. N e w Jersey: Prentice-Hall, 1962. Winter, James H. The Brass Instruments: Performance and Instructional Techniques. Boston: Allyn and Bacon, 1964. Zorn, Jay. Brass Ensemble Methods. 2d ed. San Francisco: Wadsworth Publishimg Co., 1995.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
82
Dissertations and Theses Amstutz, A. Keith. “A Videofluorographic Study o f Teeth Aperture, Instrument Pivot and Tongue Arch and Their Influence on Trumpet Performance.” Doctoral diss., University o f Oklahoma, 1970. Bjurstrom, Ned A. “An Exploratory Investigation o f Orthodontic Treatment as a Factor in the Selection and Performance o f Brass Musical Instruments.” PhD. diss., University o f Iowa, 1972. Briggs, Guy Vinton. “Electrophysiologicai Examination o f Labial Function in College-Age Trumpet Performers.” Doctoral dissertation, University o f Oklahoma, 1968. Cheney, Edward A. “Adaptation to Embouchure as a Function o f Dentofacial Complex.” Masters th., University o f Michigan, 1945. Dane, Roger. “Theories on Embouchure and Breathing: An Analytical Investigation into the Functions for Sound Production on the Trumpet.” Masters th., University o f Louisville, 1983. Gibson, Daryl R. “A Photographic Study o f Twelve Professional Trumpet Embouchures while Playing from the Low to the Extreme Upper Register.” PhD. diss., University o f Minnesota, 1973. Hall, Jody C. “A Radiographic, Spectrographic, and Photographic Study o f the NonLabial Physical Changes Which Occur in the Transition from Middle to Low and Middle to High Registers during Trumpet Performance.” Doctoral diss., Indiana University, 1954. Hammer, James W. “The Use o f Method Books and Photographs to Determine Good Embouchure Formation.” Masters th., University o f Kansas, 1951. Haynie, John J. “A Cinefluorographic (changed to video) Presentation o f the Physiological Phenomena Influencing Trumpet Performance.” Unpublished research report, North Texas State University, 1967. Isley, Charles L., Jr. “A Theory o f Brasswind Embouchure Based Upon Facial Anatomy, Electromyographic Kinesiology, and Brasswind Embouchure Pedagogy.” Doctoral diss., North Texas State University, 1972. Joachim, Nile. “Tone Production on Brass Wind Instruments.” Masters th., University o f Oklahoma, 1972.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
83 Leno, Harold L. “Lip Vibration Characteristics o f Selected Trombone Performance.” Doctoral diss., University o f Arizona, 1970. Malek, Vincent F. “A Study o f Embouchure and Trumpet-Comet Mouthpiece Measurements” Doctoral diss., Northwestern University, 1953. McQueen, William M. “The Brass Embouchure.” Masters th., Illinois Wesleyan University, 1945. Meidt, Joseph A. “A Cinefluorographic Investigation o f Oral Adjustments for Various Aspects o f Brass Instrument Performance.” Ph.D. diss., University o f Iowa, 1967. Myers, Walter J. “A Photographic, Air Flow Direction, and Sound Spectra Analysis o f Two Trumpet Embouchure Techniques.” Doctoral diss., University o f MissouriKansas City, 1979. Richtmeyer, L. C. “A Definitive Analysis o f Brass Embouchure Abnormalities Including Recommended Remedial Techniques.” Ph.D. diss., Michigan State University, 1966. Savits, Myer F. “Muscle Training Techniques Applicable to Methods Incorporating Myological Principles in Elementary Brass Embouchure Training Curricula.” Ph.D. diss., New York University, 1982. Sievers, Karl H. “Relationship Between Maxillary Incisor Formation, Practice Habits, and High Register Prowess for the Trumpet Player: Insights from Three Perspectives.” Doctoral diss., University o f Missouri-Kansas City, 1997. Snyder, Randy Lee. “Influences o f the Lips, Teeth, Tongue, Oral Cavity, and Throat on Brass Instrument Tone Production: A Guide for Secondary and College Teachers.” Masters th., Bowling Green State University, 1998. Testa, Robert F. “The Effect o f Jaw Thrust Instruction on Four Selected Aspects o f Trumpet Performance and Overjet o f Young Players.” Ph.D. diss., University o f Miami, 1972. Tunison, Earl H. “The Embouchure and Its Effect Upon the Tone and Technique o f the Brass Family.” Masters th., University o f Idaho, 1942. White, Elmer R. “Electromyographic Potentials o f Selected Facial Muscles and Labial Mouthpiece Pressure Measurements in the Embouchure o f Trumpet Players.” Ph.D. diss., Columbia University, 1972.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
84 Articles Amstutz, A. Keith. “A Videofluorographic Study o f the Teeth Aperture, Instrument Pivot and Tongue Arch and Their Influence on Trumpet Performance.” Journal o f the International Trumpet Guild (October 1977): 25ff. ________ . “Orthodontics and the Trumpeter’s Embouchure —A Practical Solution.” Journal o f the International Trumpet Guild (May 1983): 18-20. Blanton, Patricia L., Norman L. Biggs, and Roland C. Perkins. “Electromyographic Analysis o f the Buccinator Muscle.” Journal o f Dental Research 49 (March-April, 1970): 389-394. Broiles, Mel. “On Professional Trumpet Playing.” Brass World 4 (Spring, 1968): 358-360. Cheney, Edward A. “Adaptation to Embouchure as a Function o f Dentofacial Complex.” American Journal o f Orthodontics 35, no. 6 (June, 1949): 440. Cherry, C. L. “Lip Formation Exercises for Embouchure Development.” Brass World 4 (Fall, 1968): 1-39. Dudgeon, Ralph. “Credit Where Credit is Due: The Life and Brass Teaching o f Donald S. Reinhardt.” Journal o f the International Trumpet Guild (June 2000): 27-39. Ellis, John. “The Embouchure Changes: Difficult Decisions for Teachers.” Journal o f the International Trumpet Guild (February 1987): 25-27. Fine, Louis. “Dental Problems in the Wind Instrumentalist.” Cleveland Clinic Quarterly 53 (January 1986): 3-9. Gardner, Ned. “Dental Bonding: An Aid for the Embouchure.” Journal o f the International Trumpet Guild (February 1986): 19-20. Giangiulio, Richard C. “The Role o f Orthodontics in Correcting Selected Embouchure Problems.” Journal o f the International Trumpet Guild (October 1979): 20-21. Greene, William T., and George S. Befu. “The Orthodontics Alternative - Removables.” Journal o f the International Trumpet Guild (February 1987): 28-29. Gualtiere, Paul A. ‘May Johnny or Janie Play the Clarinet? The Eastman Study: A Report on the Orthodontic Evaluations o f College-level and Professional Musicians Who Play Brass and Woodwind Instruments.” Eastman Orthodontic Alumni Association (June 1976): 260-276.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
85 Henderson, Hayward W. “An Experimental Study o f Trumpet Embouchure.” Journal o f the Acoustical Society o f America 13 (July, 1942): 58-64. Heuser, Frank, and Jill L. McNitt-Gray. “EMG Potentials Prior to Tone Commencement in Trumpet Players.” Medical Problems o f Performing Artists (June 1991): 51-56. Hills, Ernie M. “Medicine and Dentistry for Brass Players.” International Trombone Association Journal XV, no. 4 (Fall 1987): 36-37. Kessler, H. E. “Dental Factors Concerned with Instrument Playing.” The Instrumentalist 11 (June, 1957): 33. Kopczyk, Raymond A., DJD.S., M.S. “Dental Considerations for the Brass Player.” FTG Newsletter (May 1982): 12-13. Lamp, Charles J., and Francis W. Epley. “Relation o f Tooth Evenness to Performance on the Brass and Woodwind Musical Instruments.” Journal o f the American Dental Association (July 1935): 1232-1236. Lieberman, William B. and Robert C. Jones. “Dental Appliances as an Aid to Brass Playing.” The Instrumentalist (October 1971): 52-54. Martin, Daniel W. “Lip Vibrations in a Comet Mouthpiece.” The Journal o f the Acoustical Society o f America 13 (January, 1942): 305-308. Mortenson, Gary C., and Lawrence W. Kolar. “The Extraction o f Wisdom Teeth: Information on Procedures and Problems.” Journal o f the International Trumpet Guild (February 1990): 19-23. Moorehead, Jean K. “Embouchures: Their Assets and Liabilities -- An Interview with Armando Ghitalla.” Journal o f the International Trumpet Guild (February 1987): 17ff. Olson, R. Dale. “Brass Mouthpiece Function.” Brass World 3 (Winter 1967): 206-208. “The Pupil’s the Thing. Brass Embouchure.” The Instrumentalist 3 (March-April, 1949): 58. Reynolds, George E. “Brass Tone and Embouchure.” The Instrumentalist 3 (March-April, 1949): 58. Train, Jack. “Brace Yourself.” Journal o f the International Trumpet Guild (September 1993): 29.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
86
________ . “Dentistry and the Wind Musician.” Journal o f the International Trumpet Guild (February 1992): 14fF. ________ . “Let’s Fix It Before It Breaks - A Career Almost Destroyed.” Journal o f the International Trumpet Guild (May 1992): 2 Iff. Usov, Yuri. “The Scientific-Theoretical Principles o f Performance for Playing Brass Wind Instruments.” Journal o f the International Trumpet Guild (December 1985): 1921 . Weast, Robert, and Ardell Hake. “A Definitive Analysis o f Mouthpiece Pressure.” The Brass World 1 (1965): 38-43.
Interviews Bernard, Rene, eleven-year student o f Donald Reinhardt. Interview by author, 16 April 1991, Olathe, Kansas.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
BIOGRAPHICAL SKETCH David Ray Turnbull was bom in Chanutte, Kansas, on March 12,1961. His secondary education took place at Grand Island Senior High School in Grand Island, Nebraska. In May o f 1983, he graduated from Hastings College with a B.M. in Education; his student teaching was through the Cooperative Urban Teacher Education Program at Rockhurst College in Kansas City, Missouri. In May o f 1986, he received a M.M. in Trumpet Performance from Arizona State University in Tempe, Arizona. Turnbull also served as a Graduate Assistant in Trumpet at Arizona State University while studying for a D.M.A. in Trumpet Performance. He was a Visiting Professor o f Music at The University o f Kansas during the 1987-88 school year. He stayed on as an Assistant Professor through 1992. In 1992, he played second trumpet with The Kansas City Symphony. In 1993, he performed with the Royal Brass Ensemble at Huis ten Bosch near Nagasaki, Japan. He then went on, from 1994 through 1996, to serve as a temporary Assistant Professor o f Music at Washington State University in Pullman, Washington. He now serves as an Assistant Professor o f Music (Trumpet) at Washington State University.
Reproduced with permission of the copyright owner. Further reproduction prohibited without permission.
View more...
Comments
