Registros Electricos en Pozos Petroleros I

February 9, 2018 | Author: Brice Ulyn | Category: Ionizing Radiation, Radiation Protection, Radioactivity, Nuclear Chemistry, Physical Phenomena
Share Embed Donate


Short Description

Download Registros Electricos en Pozos Petroleros I...

Description

WL- JDA Pre-School Program Schlumberger Private

WL-HSE

Objectives At the end of this task, you will be able to: Define SOP; describe what these videos say about SOP: Silent Source, No Second Chance, Pressure-Level-1.

9

Define the 5 types of ionizing radiation (Alpha, Beta, Gamma, Neutron and X-Ray).

9

Describe the maximization/minimization principles of Time, Distance, Shielding and the inverse square law.

9

Describe the function of the Radiation Badge

9

Describe the function of the RADIATION PLACARD.

9

Define what is an explosive and why we use them in WL operations.

9

Define an Explosive in terms of High and Low and the difference between Primary High and Secondary High.

9

Describe the function of the EXPLOSIVE PLACARD .

9

Describe the Pressure Standard by stating: the dangers associated with pressure operations; the goal of the Pressure Standard; policy of pressure testing; policy of training; working pressures; use of approved equipment

2

WLH-JDA-PRE-SCHOOL

June 06

Schlumberger Private

9

How to complete WL -HSE requirements The QHSE training you received in OFS-1 is relevant to all activities in Schlumberger. There are however specific Hazards that you will deal with in Wireline. You must be trained to the Schlumberger Standard on these Hazards. Remember, Schlumberger Standards are considered to be a benchmark in the Oil and Gas industry. Lets look at the 3 main hazards specific to Wireline operations. Each of these hazards deserves your respect and attention. 1

2

Explosives

3

Pressure

Radiation Schlumberger Private

For each of these you must be Level-1 Certified before coming to the Training Centre

This presentation will show you how to get yourself Certified 3

WLH-JDA-PRE-SCHOOL

June 06

Explosives, Pressure and Radiation Level-1 You can be certified on Explosives, Pressure or Radiation Level-1 in 3 Steps STEP 1: Watch the Video

STEP 2: Review a Presentation on QUEST

STEP 3: Take a Test in Quest 4:To view the presentation Click on “Explosives”, “Pressure” or “Radiation” Level-1

1-The Video can be found in the location (See your FSM)

(If Explosives, Pressure and Radiation Level-1 are not listed here, See your QHSE officer.)

2: Log in to Quest at

http://quest.slb.com (using your LDAP)

3: After login, Click on “My Certifications” from the menu on the left This will display the list of Certifications available to you. 4

WLH-JDA-PRE-SCHOOL

June 06

Schlumberger Private

5: Click on the link for the presentation

NOTE: you have to Disable Pop-up Blockers from in your Internet Explorer (OR just hold down the “Ctrl” button on your keyboard while clicking on the links from Quest (Quest Uses Pop-ups on the site)

6: After reviewing the presentation, come back to here and click

THAT’S IT-GOOD LUCK!

”Take Test”

(REMEMBER TO GET YOUR QHSE PASSPORT UPDATED)

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF