R24DM0-GW

R24DM0 Dual Band Selective Repeater

Application

Donor antenna Splitter R24DM0 Server antenna Cable

Features

Block Diagram

Intelligent algorithm to prevent interference to nearby BTS Self-control to minimize interference for new rollout BTS Isolation detection function Support to monitor the quality of donor signal for easy optimization and troubleshooting

Specifications R24DM0-GW Frequency Range

Uplink Downlink

GSM 890 ~ 915 MHz 935 ~ 960 MHz

Bandwidth(-3 dB) Max. Gain Manual Gain Control Automatic Gain Control Gain Flatness Max. Input Power Without Damage Uplink Output Power Downlink Spurious Emission Spectrum Emission Mask ACRR Peak Code Domain Error EVM Frequency Stability

various bandwidth is available upon request UL: ≧85 dB; DL: ≧89 dB 31 dB in step of 1 dB ≧20 dB ≦3 dB(p-p) 0 dBm ≧25 dBm/total output power ≧37 dBm/total output power

≧23 dBm/total output power ≧37 dBm/total output power

Comply with ETSI -----------

Comply with 3GPP Comply with 3GPP Comply with 3GPP ≦-35dB@Spreading Factor 256 ≦12.5% ≦ ±0.01 ppm ≦ 6 dB ≦ -14 dB ≦4.5 uS

Noise Figure Return Loss Group Delay RF Connector Impedance Power Supply

N-Female 50Ω AC 110/220 V, 50/60 Hz ≦210W

Power Consumption Dimensions Weight IP Rating Operating Temperature Local Control & Monitoring Remote

WCDMA 1920 ~ 1980 MHz 2110 ~ 2170 MHz

680*450*240 mm ≦40 kg IP55 -25~55 ℃ Via RJ45 Port Via Wireless Modem (optional) Monitor the Serving Cell BCCH, RSSI, RxQual, TA, BSIC, Cell ID, LAC, & Net Name. Monitor the Neighbor Cells Status, UARFCN, SC, RSCP, and Ec/No.

* Technical spec subject to change without notice.