R18GM0-GW

R18GM0 Dual Band Mini Repeater

Application

Yagi antenna R18GM0 Splitter Omni antenna Cable

Block Diagram

Features Intelligent algorithm to prevent UL interference Self-control to minimize interference for new rollout BTS Silent mode function Self-oscillation prevention Support monitoring of donor & neighbor cell information Plug & play, auto setup & optimization Support to monitor the quality of donor signal for easy optimization and troubleshooting Comply with ETSI standard

Specifications R18GM0-GW Frequency Uplink Range Downlink Bandwidth(-3 dB) Max. Gain Manual Gain Control Automatic Gain Control Gain Flatness Max. Input Power Without Damage Uplink Output Power Downlink Out of Band Gain Intermodulation Products Spurious Emission Spectrum Emission Mask ACRR EVM PCDE

GSM WCDMA 890 ~ 915 MHz 1920 ~ 1980 MHz 935 ~ 960 MHz 2110 ~ 2170 MHz various bandwidth is available upon request(Max. 25MHz) ≧70 dB 31 dB in step of 1 dB ≧20 dB ≦4 dB(p-p) 0 dBm ≧15 dBm/ total output power ≧15 dBm/ total output power Comply with ETSI Comply with ETSI Comply with ETSI ---------

Noise Figure Return Loss Group Delay RF Connector Impedance Power Supply

Control & Monitoring

Remote

Comply with 3GPP Comply with 3GPP Comply with 3GPP Comply with 3GPP ≧20 dBc/30 KHz @ ±5 MHz&±10 MHz ≦12.5% ≦-35 dB@Spreading Factor 256 ≦ 7 dB(typical) ≦ -10 dB ≦4.5 uS

N-Female 50Ω Input: AC 100~240V; Output: DC 9V/8A ≦45W

Power Consumption Dimensions Weight IP Rating Operating Temperature Local

≧15 dBm/ total output power ≧15 dBm/ total output power

232*270*78 mm ≦7 kg IP40 -10~50 ℃ Via RJ45 & LED Control Panel Via Wireless Modem (optional) Monitor the Serving Cell BCCH, RSSI, RxQual, TA, BSIC, Cell ID, LAC, & Net Name. Monitor the Neighbor Cells ARFCN, Power, Cell ID, and LAC.

* Technical spec subject to change without notice.