PV Elite Tips and Tricks

PV Elite Tips and Tricks

Mandeep Singh, 03/22/10: EDIT THIS IN THE “MASTER” > “SLIDE COADE, MASTER” THE “INSERT” Inc. MENU FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > 3/22/10 UNDER “SLIDE MASTER” UNDER THE “INSERT” MENU

PV Elite tips and tricks

Welcome

Tips and tricks to make you

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

2

This is a Collaboration



I will Share some tips with you.



But you also have to Share your favorite tips.

And 

3/22/10

Your feedback.

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

3

First add some Global data

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

4

Design Constraints



Pressure/temperatures



Hydrotest type



Set the Datum line



Limiting MAWP (if needed)

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

5

Design Constraints - Datum

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

6

Lets go to Load Cases

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

7

Load Cases – Nozzle Design Option

  

“MAWP” option prevents nozzle from controlling Safeguard against Elevation change Design Pressure option – good for re-rating



Design for ‘MAPnc’ – safeguard for hydrotest

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

8

Let’s start building



Add element



Give Elements descriptive names

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

9

Effect of Shell length on Seismic loading



3/22/10

Which is a Realistic Weight Distribution?

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

10

Shell course length – cont.

Which is more Accurate modeling of wind loading ?

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

11

Tip - Shell Length



Use plate length as element lengths, e.g. – 10 feet or – 3 meters or – Other std.

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

12

Finding your material

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

13

Lets look at the status bar

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

14

Status bar – a quick run down

Design Length for Vacuum calcs. Maximum Vacuum Pressure 3rd element out of 5 total Starting/Ending Element Elevations from datum Orientation, usu. not needed 3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

15

Status bar – a quick run down

Internal Pressure required Thickness Maximum Internal Pressure Maximum Pressure in New & Cold cond. Required Thickness for Vacuum case Maximum distance before ring needed 3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

16

Let’s Continue building



Check the on-screen results



Fix only the Internal Pressure failures



Complete the Pressure Envelope

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

17

Now add Wind/Seismic loading

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

18

Continuing Building



Analyze your job.



Satisfy Internal Pressure



Satisfy combined loads



Now, we are ready to check for vacuum

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

19

Now lets check for Vacuum

Design Length for Vacuum calcs. Required Thickness for Vacuum case 

Place a ring at a distance of “Slen”

Maximum distance before ring needed

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

20

Cone-Cylinder Junction options

Try other design options as well.

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

21

Program Auto design Options

3/22/10

 Auto-select

thickness for pressure

 Auto-select

thickness for Vacuum

 Select

rings for Vacuum

 Select

thickness for combined wind/seismic/wt.

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

22

Now let’s add Nozzles



3/22/10

Try these : –

FVC catalog

–

Coupling lookup

–

“Just like”

–

View Results

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

23

What's wrong here ?

3/22/10



Using “Plot” button



Watch for “reinforcement limits” in red dotted line.

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

24

Store & Apply Std. Nozzle loads

3/22/10



Store std. loads



Import loads on nozzle

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

25

Import piping loads from CAESAR II



Specify, – – –



3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

Global conv. direction cosines Node #

Import loads from C2 file

26

Editing tips



3/22/10

Global Pressures/Temperatures change

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

27

Global share

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

28

List Dialog for fast manipulation

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

29

Lets look at the 3D palette.

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

30

Visually Translate Nozzles, rings etc.

Click on the “Select-by-Click” icon

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

31

Translating a nozzle

Click and Select the nozzle to move.

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

32

Translating a nozzle

Click on Translate detail icon and click on the nozzle move it.

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

33

Translating a nozzle

Nozzle moves to new location.

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

34

Make 3D model transparent

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

35

Use Cutting Planes to dissect

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

36

Find my Nozzle

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

37

See Nozzle Interference

Right click on 3D or From “3D” menu.

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

38

Share 3D model with customers

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

39

PV Elite model in Internet Explorer



3/22/10

May need to install Viewer from Tech Soft

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

40

How to add a Nozzle to a Nozzle

    

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

Add the Parent nozzle Add child nozzle Specify its diameter Indicate it’s a child Select its Parent nozzle

41

How to add a Sump/Boot - 1

3/22/10



Add the “boot” as a nozzle



Select “None” for flange.

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

42

How to add a Sump/Boot - 2

3/22/10



Now add a head



Check the box for “Sump Head”



Connect it to the “boot” nozzle

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

43

Flip Vessel for analysis

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

44

Output tips - 1

3/22/10



Export (all or some) reports to MSWord



Can re-order Report list.



Reports can be deleted too

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

45

Exporting to ASME U forms



3/22/10

Export to National Board U forms

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

46

Output tips – Set font/Other options

3/22/10



Select Options tab



Set font/Page #s

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

47

Set some defaults

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

48

More customization



Std. Saddle dimensions



Gasket Properties

3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

49

That are some of tips/tricks

The End 3/22/10

FOOTER: EDIT THIS AND THE DATE IN THE “MASTER” > “SLIDE MASTER” UNDER THE “INSERT” MENU

50