PTS 31.38.01.15A _ PIPING CLASSES - EXPLORATION AND PRODUCTION.pdf
Short Description
Download PTS 31.38.01.15A _ PIPING CLASSES - EXPLORATION AND PRODUCTION.pdf...
Description
PETRONAS PETR ONAS TECHNICAL TECHNICAL STANDARDS DESIGN AND ENGINEERING PRACTICE
MANUAL
PIPING CLASSES - EXPLORATION AND PRODUCTION
PTS 31.38.01.15
January 2010
2010 PETROLIAM NASIONAL BERHAD (PETRONAS) All rights reserved. No part of this this document may be reproduced, stored in a retrieval retrieval system or transmitted in any form or by any means
PTS 31.38.01.15 January 2010 Page 2
PREFACE PETRONAS Technical Standards (PTS) publications reflect the views, at the time of publication,of PETRONAS OPUs/Divisions. They are based on the experience acquired during the involvement with the design, construction, operation and maintenance of processing units and facilities. Where appropriate they are based on, or reference is made to, national and international standards and codes of practice. The objective is to set the recommended standard for good technical practice to be applied by PETRONAS' OPUs in oil and gas production facilities, refineries, gas processing plants, chemical plants, marketing facilities or any other such facility, and thereby to achieve maximum technical and economic benefit from standardisation. The information set forth in these publications is provided to users for their consideration and decision to implement. This is of particular importance where PTS may not cover every requirement or diversity of condition at each locality. The system of PTS is expected to be sufficiently flexible to allow individual operating units to adapt the information set forth in PTS to their own environment and requirements. When Contractors or Manufacturers/Suppliers use PTS they shall be solely responsible for the quality of work and the attainment of the required design and engineering standards. In particular, for those requirements not specifically covered, it is expected of them to follow those design and engineering practices which will achieve the same level of integrity as reflected in the PTS. If in doubt, the Contractor or Manufacturer/Supplier shall, without detracting from his own responsibility, consult the owner. The right to use PTS rests with three categories of users: 1) 2) 3)
PETRONAS and its affiliates. affiliat es. Other parties who are authorised to use PTS subject to appropriate contractual arrangements. Contractors/subcontractors Contractors/subcontractors and Manufacturers/Suppli Manufacturers/Suppliers ers under a contract with users referred to under 1) and 2) which requires that tenders for projects, materials supplied or - generally - work performed on behalf of the said users comply with the relevant standards.
Subject to any particular terms and conditions as may be set forth in specific agreements with users, PETRONAS disclaims any liability of whatsoever nature for any damage (including injury or death) suffered by any company or person whomsoever as a result of or in connection with the use, application or implementation of any PTS, combination of PTS or any part thereof. The benefit of this disclaimer shall inure in all respects to PETRONAS and/or any company affiliated to PETRONAS that may issue PTS or require the use of PTS. Without prejudice to any specific terms in respect of confidentiality under relevant contractual arrangements, PTS shall not, without the prior written consent of PETRONAS, be disclosed by users to any company or person whomsoever and the PTS shall be used exclusively for the purpose they have been provided to the user. They shall be returned after use, including any copies which shall only be made by users with the express prior written consent of PETRONAS. The copyright of PTS vests in PETRONAS. Users shall arrange for PTS to be held in safe custody and PETRONAS may at any time require information satisfactory to PETRONAS in order to ascertain how users implement this requirement.
PTS 31.38.01.15 January 2010 Page 3 TABLE OF CONTENTS
1.
INTRODUCTION .......................................................... ....................................................................................... ................................................. ....................4 1.1 SCOPE ........................................................... ........................................................................................ .......................................................... .............................4 1.2 DISTRIBUTION, INTENDED USE AND REGULATORY CONSIDERATIONS ............................................................. .......................................................................................... ................................. ....4 1.3 DEFINITIONS ........................................................ ..................................................................................... ................................................. ....................4 1.4 CROSS REFERENCES ........................................................... ........................................................................................ .............................4 1.5 SUMMARY OF CHANGES SINCE THE LAST REVISION ............................. 4 1.5.1 Introduction.......................................................... ........................................................................................ ............................................. ...............4 1.5.2 Pressure/temperature Pressure/temperature rating ........................................................... .......................................................................... ...............4 1.5.3 Piping classes .......................................................... .......................................................................................... ........................................ ........ 5 1.5.4 Valves .............................................................. ........................................................................................... ................................................. ....................5 1.5.5 Stud bolts ......................................................... ...................................................................................... ................................................. ....................5 1.5.6 Spectacle blinds/spades blinds/spades ........................................................ ................................................................................ ........................5 1.5.7 Gaskets ............................................................ ......................................................................................... ................................................. ....................5 1.5.8 Miscellaneous .......................................................... .......................................................................................... ........................................ ........5 1.5.9 Impact testing of austenitic stainless steel .................................................. ..................................................6 2. PIPING CLASSES – SERVICES AND MATERIALS SELECTION INDEX ........7 3. PIPING CLASSES ........................................................... ......................................................................................... ............................................. ...............8 4. REFERENCES………………………………………………………………………..9 REFERENCES ………………………………………………………………………..9 APPENDICES
APPENDIX A
DETAILED CHANGES CHANGES PER PIPING PIPING CLASS………………….10 CLASS………………….10
PTS 31.38.01.15 January 2010 Page 4 1.
INTRODUCTION
1.1
SCOPE
This PTS contains the piping classes for exploration and production facilities. The basis of design of the piping classes is given in PTS 31.38.01.10 This is a revision of the PTS of t he same number dated December 1999; a summary of the changes since the last revision is included in (1.5). The general requirements for piping systems are specified in PTS 31.38.01.11. Excluded from the scope of t his PTS are: •
•
1.2
oil and gas transmission pipeline systems; piping classes for refineries and chemical plants, which are included in PTS 31.38.01.12. DISTRIBUTION, INTENDED USE AND REGULATORY CONSIDERATIONS
Unless otherwise authorised by PETRONAS, the distribution of this PTS is confined to companies forming part of PETRONAS Group, and to Contractors nominated by them. This PTS is intended for use in exploration and production facilities, within the property limits as defined in ASME B31.3 par. 300.1. If national and/or local regulations exist in which some of t he requirements may be more stringent than in this PTS the Contractor shall determine by careful scrutiny which of the requirements are the more stringent and which combination of requirements will be acceptable as regards safety, economic and legal aspects. In all cases the Contractor shall inform the Principal of any deviation from the requirements of this PTS which is considered to be necessary in order to comply with national and/or local regulations. The Principal may then negotiate with the Authorities concerned with the object of obtaining agreement to follow this PTS as closely as possible. 1.3
DEFINITIONS
The Contractor is the party which carries out all or part of the design, engineering, procurement, construction, commissioning or management of a project or operation of a facility. The Principal may undertake all or part of the duties of the Contractor. The Principal is the party which initiates, and ultimately pays for, the project. The Principal will generally specify the technical requirements. The Principal may also include an agent or consultant, authorised to act for the Principal. The word shall indicates a requirement. The word should indicates a recommendation. 1.4
CROSS REFERENCES
Where cross-references to other parts of this PTS are made, the referenced section number is shown in brackets. Other documents referenced by t his PTS are listed in (4). 1.5
SUMMARY OF CHANGES SINCE THE LAST REVISION
1.5.1 Introduction This revision is mainly an update of the existing piping classes to align with the latest developments. The main changes are listed below. An overview of the changes per piping class is given in Appendix A.
1.5.2 Pressure/temperature rating
PTS 31.38.01.15 January 2010 Page 5 1.5.3 Piping classes Alloy 625, Alloy 825 and 6Mo piping classes with solid and clad material have been developed for the need of recent projects. Piping classes with soft seated ball valves have been replaced due to change from BS 5351 to ISO 17292, which includes a change in pressure/temperature rating. Piping classes with carbon steel galvanised piping are only applicable for fire fighting service and have therefore been removed from this PTS. Piping classes with pipe clamp connectors have not been issued with this revision due to a review on the design verification of the various manufacturer specific clamp connectors. Due to the medium (sodium hypochlorite), titanium piping class 16041 has been subject t o fugitive emission tightness class A. 1.5.4 Valves PETRONAS International is working on enhanced group philosophies regarding fugitive emissions on a toxicological and environmental base. This have been applied on the selection of valves and reflect piping classes which are suitable for fugitive emission tightness class A. See PTS 31.38.01.10-Gen, para 3.10. ASTM A216 grade LCB material have been deleted from group piping classes, to be replaced with the now widely available ASTM A216 grade LCC material. This change has allowed higher class ratings for new piping classes. Flanged short pattern triple eccentric butterfly valves have been introduced for DN 200 and larger as an economic alternative for gate valves. Due to a higher performance, these valves have also replaced wafer type butterfly valves class 150 and 300. Dual plate check valves have been introduced for DN 300 and larger sizes, as an economic alternative for swing type check valves. BS 5351 ball valves have been withdrawn and replaced by ISO 17292. Due to a deviation in pressure/temperature rating between both specifications, new piping classes have been developed (see 1.6.3). The maximum temperature of soft seated ball valves have been increased from 120 to 150 °C, which is the maximum allowable temperature for PTFE and Devlon V seats. Ball valves with electroless nickel plated (ENP) balls have been removed from the piping classes and replaced by valves with stainless steel balls. See PTS 39.01.10.11-Gen. 1.5.5 Stud bolts Bolt lengths have been reviewed and verified. 1.5.6 Spectacle blin ds/spades Spectacle blinds have been reviewed for ergonomics and limited to the maximum allowable size in accordance with PTS 31.38.01.11-Gen. Spades have been added for all sizes. 1.5.7 Gaskets For pressure classes and sizes up to/incl. DN 600, stainless steel spiral wound graphite gaskets with a stainless steel inner ring and a carbon steel outer ring have been specified. The manufacturing standard for spiral wound gaskets has changed from BS 3381 to ASME B16.20. New gaskets have been introduced f or duplex stainless steel and titanium piping classes. 1.5.8 Miscellaneous The maximum size of vents and drains has been increased, relative to t he header size. Non-piping items such as level gauges and level displacer have been removed from the piping classes. Thermowells
have
been
replaced
in
accordance
with
new
design.
See
PTS 31.38.01.15 January 2010 Page 6 1.5.9 Impact testing of austeniti c stainless steel For application at temperatures below –101 °C, ASME B31.3 para 3.2.3.2.2 requires impact testing at the lower design temperature. This requirement has been reflected in the applicable austenitic stainless steel grade 304 cryogenic piping classes, through impact testing at –196 °C.
PTS 31.38.01.15 January 2010 Page 7 2.
PIPING CLASSES – SERVICES AND MATERIALS SELECTION INDEX
This index is presented as an excel spreadsheet which is attached in the attachment.
31380184
General 1 Selection between 1 and 3 mm corrosion allowance ptsending on the corrosivety of the medium has to be selected by the corrosion engineer. 2 For the definition of "High Sour" and "Moderate Sour", see PTS 31.38.01.11, Appendix 10.
3 4 5 6 7
8 9 10 11 12 13 14 15
Notes for R&C piping classes Specific Piping classes 31011 and 31012 are interchangeable. See PTS 30.10.02.31 for low temperature service. Chemical Abstracts Service Registry Number Consult a corrosion engineer for a check on the high temperature sulphidation corrosion rate and select materials accordingly. Amine includes ADIP, MEA, DEA, AD, TEA and Sulfinol: H2S case = H2S/CO2 > 0.01 for gas phase, > 0.02 for liquid phase; CO2 case = H2S/CO2 < 0.01 for gas phase, > 0.02 for liquid phase. Selection shall be carried out by materials engineer on the the basis of the specific process conditions. Hydrocarbon service includes aviation alkylate, LPG, C1-C4, paraffins and olefins, fuel gas, fuel oil, gasoil, gasoline, isopentane, luboil, naphtha, pentane, toluene and xylene. See PTS 31.40.10.19 for the use of GRP piping. See PTS 80.47.10.31 for fire fighting installations. H2 pp < 7 bar; wet H 2S < 50 mg/kg; wet HCN < 20 wppm; S < 0.3 wt. %; TAN < 0.3; H 2S < 0.01 mol.% See MESC SPE 77/302 for Fugitive Emission Tightness Class Minimum and maximum temperature relate to the design limits of the piping class components inptsendent of the medium The applicable temperature range, encountered in practice, may be determined by the medium, e.g. due to corrosion. These temperatures provides guidance
Notes for E&P piping classes Specific 20 Piping classes 31410 and 31411; 31450 and 31451 are interchangeable.
General 1 Selection between 1 and 3 mm corrosion allowance ptsending on the corrosivety of the medium has to be selected by the corrosion engineer. 2 For the definition of "High Sour" and "Moderate Sour", see PTS 31.38.01.11, Appendix 10.
3 4 5 6 7
8 9 10 11 12 13 14 15
Notes for R&C piping classes Specific Piping classes 31011 and 31012 are interchangeable. See PTS 30.10.02.31 for low temperature service. Chemical Abstracts Service Registry Number Consult a corrosion engineer for a check on the high temperature sulphidation corrosion rate and select materials accordingly. Amine includes ADIP, MEA, DEA, AD, TEA and Sulfinol: H2S case = H2S/CO2 > 0.01 for gas phase, > 0.02 for liquid phase; CO2 case = H2S/CO2 < 0.01 for gas phase, > 0.02 for liquid phase. Selection shall be carried out by materials engineer on the the basis of the specific process conditions. Hydrocarbon service includes aviation alkylate, LPG, C1-C4, paraffins and olefins, fuel gas, fuel oil, gasoil, gasoline, isopentane, luboil, naphtha, pentane, toluene and xylene. See PTS 31.40.10.19 for the use of GRP piping. See PTS 80.47.10.31 for fire fighting installations. H2 pp < 7 bar; wet H 2S < 50 mg/kg; wet HCN < 20 wppm; S < 0.3 wt. %; TAN < 0.3; H 2S < 0.01 mol.% See MESC SPE 77/302 for Fugitive Emission Tightness Class Minimum and maximum temperature relate to the design limits of the piping class components inptsendent of the medium The applicable temperature range, encountered in practice, may be determined by the medium, e.g. due to corrosion. These temperatures provides guidance
Notes for E&P piping classes Specific 20 Piping classes 31410 and 31411; 31450 and 31451 are interchangeable.
Labeling of dangerous substances and preparations Symbols and indications of danger for dangerous substances and preparations [1]
E : Explosive
O : Oxidizing
F+ : Extremely flammable
F : Highly flammable
T+ : Very toxic
C : Corrosive
Xn : Harmful
Xi : Irritant
N : Dangerous to the environment N® : Dangerous to the environment, including R50
Definitions
T : Toxic
The following substances and preparations are "dangerous" (EC-Directive 92/32/EEC) [2]: Explosive substances and preparations: solid, liquid, pasty or gelatinous substances and preparations which may also react exothermically without atmospheric oxygen thereby quickly evolving gases, and which, under defined test conditions, detonate, quickl Oxidising substances and preparations: substances and preparations which give rise to a highly exothermic reaction in contact with other
Labeling of dangerous substances and preparations Symbols and indications of danger for dangerous substances and preparations [1]
E : Explosive
O : Oxidizing
F+ : Extremely flammable
F : Highly flammable
T+ : Very toxic
C : Corrosive
Xn : Harmful
Xi : Irritant
N : Dangerous to the environment
Definitions
T : Toxic
N® : Dangerous to the environment, including R50 The following substances and preparations are "dangerous" (EC-Directive 92/32/EEC) [2]: Explosive substances and preparations: solid, liquid, pasty or gelatinous substances and preparations which may also react exothermically without atmospheric oxygen thereby quickly evolving gases, and which, under defined test conditions, detonate, quickl Oxidising substances and preparations: substances and preparations which give rise to a highly exothermic reaction in contact with other substances, particularly flammable substances. Extremely flammable substances and preparations: liquid substances and preparations having an extremely low flash-point and a low boiling-point and gaseous substances and preparations which are flammable in contact with air at ambient temperature and pres Highly flammable substances and preparations: - substances and preparations which may become hot and finally catch fire in contact with air at ambient temperature without any application of energy, or - solid substances and preparations which may readily catch fire after brief contact with a source of ignition and which continue to burn or to be consumed after removal of the source of ignition, or - liquid substances and preparations having a very low flash-point, or - substances and preparations which, in contact with water or damp air, evolve highly flammable gases in dangerous quantities. Flammable substances and preparations: liquid substances and preparations having a low flash-point. Very toxic substances and preparations: substances and preparations which in very low quantities cause death or acute or chronic damage to health when inhaled, swallowed or absorbed via the skin. Toxic substances and preparations: substances and preparations which in low quantities cause death or acute or chronic damage to health when inhaled, swallowed or absorbed via the skin. Harmful substances and preparations: substances and preparations which may cause death or acute or chronic damage to health when inhaled, swallowed or absorbed via the skin. Corrosive substances and preparations: substances and preparations which may, on contact with living tissues, destroy them. Irritant substances and preparations: non-corrosive substances and preparations which, through immediate, prolonged or repeated contact with the skin or mucous membrane, may cause inflammation. Sensitizing substances and preparations: substances and preparations which, if they are inhaled or if they penetrate the skin, are capable of eliciting a reaction of hypersensitization such that on further exposure to the substance or preparation, charact Carcinogenic substances and preparations: substances or preparations which, if they are inhaled or ingested or if they penetrate the skin, may induce cancer or increase its incidence. Mutagenic substances and preparations: substances and preparations which, if they are inhaled or ingested or if they penetrate the skin, may induce heritable genetic defects or increase their incidence. Substances and preparations which are toxic for reproduction: substances and preparations which, if they are inhaled or ingested or if they penetrate the skin, may produce, or increase the incidence of, non-heritable adverse effects in the progeny and/or Substances and preparations which are dangerous for the environment: substances and preparations which, were they to enter the environment, would present or may present an immediate or delayed danger for one or more components of the environment.
Labeling of dangerous substances and preparations Nature of special risks attributed to dangerous substances and preparations: R- and S-phrases [3] Nature of special risks attributed to dangerous substances and preparations: R-phrases R1 Explosive when dry R2 R3
Risk of explosion by shock , friction, fire or other sources of ignition Extreme risk of explosion by shock, friction, fire or other sources of ignition
R4 R5
Forms very sensitive explosive metallic compounds Heating may cause an explosion
R6 R7 R8 R9
Explosive with or without contact with air May cause fire Contact with combustible material may cause fire Explosive when mixed with combustible material
R 10 R 11
Flammable Highly flammable
R 12 R 14 R 15 R 16
Extremely flammable Reacts violently with water Contact wit h water liberates extrem ely flam mable gases Explosive when mixed with oxidizing substances
R 17 R 18
Spontaneously flammable in air In use, may f orm flamm able/explosive vapour-air mixt ure
R 19 R 20 R 21 R 22
May form explosive peroxides Harmful by inhalation Harmful in contact with skin Harmful if swallowed
R 23 R 24
Toxic by inhalation Toxic in contact with skin
R 25 R 26 R 27 R 28
Toxic if swallowed Very toxic by inhalation Very toxic in contact with skin Very toxic if swallowed
R 29 R 30
Contact with water liberates toxic gas Can become highly flammable in use
R 31 R 32 R 33 R 34
Contact with acids liberates toxic gas Contact with acids liberates very toxic gas Danger of cumulative effects Causes burns
R 35 R 36
Causes severe burns Irritating to eyes
R 37 R 38 R 39 R 40
Irritating to respiratory system Irritating to skin Danger of very serious irreversible effects Limited evidence of a carcinogenic effect
R 41 R 42
Risk of serious damage to eyes May cause sensitization by inhalation
R 43 R 44 R 45 R 46
May cause sensitization by skin contact Risk of explosion if heated under confinement May cause cancer May cause heritable genetic damage
R 48 R 49
Danger of serious damage to health by prolonged exposure May cause cancer by inhalation
R 50 R 51 R 52 R 53
Very toxic to aquatic organisms Toxic to aquatic organisms Harmful to aquatic organisms May cause long-term adverse ef fects in the aquatic environm ent
R 54 R 55
Toxic to flora Toxic to fauna
R 56 R 57 R 58 R 59
Toxic to soil organisms Toxic to bees May cause long-term adverse ef fects in the environment Dangerous for the ozone layer
R 60 R 61
May impair fertility May cause harm to the unborn child
R 62
Possible risk of impaired fertility
R 63 R 64
Possible risk of harm to the unborn child May cause harm to breastfed babies
R 65
Harmful: may cause lung damage if swallowed
R 66
Repeated exposure may cause skin dryness or cracking
Labeling of dangerous substances and preparations R 67
Vapours may cause drowsiness and dizziness
Labeling of dangerous substances and preparations R 68 R 14/15 R 15/29 R 20/21
Possible risk of irreversible effects Reacts violently with water, liberating extremely flammable gases Contact with water liberates toxic, extremely flammable gas Harmful by inhalation and in contact wit h skin
R 20/22 R 20/21/22
Harmful by inhalation and if swallowed Harmful by inhalation, in contact with skin and if swallowed
R 21/22 R 23/24
Harmful in cont act with skin and if swallowed Toxic by inhalation and in contact with sk in
R 23/25 R 23/24/25 R 24/25 R 26/27
Toxic by inhalation and if swallowed Toxic by inhalation, in contact with skin and if swallowed Toxic in contact with sk in and if swallowed Very toxic by inhalation and in contact with skin
R 26/28 R 26/27/28
Very toxic by inhalation and if swallowed Very toxic by inhalation, in contact with skin and if swallowed
R 27/28 R 36/37 R 36/38 R 36/37/38
Very toxic in contact with skin and if swallowed Irritating to eyes and respiratory system Irritating to eyes and skin Irritating to eyes, respiratory system and skin
R 37/38 R 39/23
Irritating to respiratory syst em and sk in Toxic: danger of very serious irreversible effects through inhalation
R 39/24 R 39/25 R 39/23/24 R 39/23/25
Toxic: danger of very serious irreversible effects in contact with skin Toxic: danger of very serious irreversible effects if swallowed Toxic: danger of very serious irreversible effects through inhalation and in contact with skin Toxic: danger of very serious irreversible effects through inhalation and if swallowed
R 39/24/25 R 39/23/24/25
Toxic: danger of very serious irreversible effects in contact with skin and if swallowed Toxic: danger of very serious irreversible effects through inhalation, in contact
R 39/26 R 39/27 R 39/28 R 39/26/27
Very toxic: danger of very serious irreversible effects through inhalation Very toxic: danger of very serious irreversible effects in contact with skin Very toxic: danger of very serious irreversible effects if swallowed Very toxic: danger of very serious irreversible effects through inhalation and in contact with skin
R 39/26/28
Very toxic: danger of very serious irreversible effects through inhalation and if swallowed
R 39/27/28
Very toxic: danger of very serious irreversible effects in contact with skin and if swallowed
R 39/26/27/28 R 42/43 R 48/20 R 48/21
Very toxic: danger of very serious irreversible effects through inhalation, in contact with skin and if swallowed May cause sensitisation by inhalation and skin contact Harmful: danger of serious damage to health by prolonged exposure through inhalation Harmful: danger of serious damage to health by prolonged exposure in contact with skin
R 48/22
Harmful: danger of serious damage to health by prolonged exposure if swallowed
R 48/20/21
Harmful: danger of serious damage to health by prolonged exposure through inhalation and in contact with skin
R 48/20/22 R 48/21/22 R 48/20/21/22
Harmful: danger of serious damage to health by prolonged exposure through inhalation and if swallowed Harmful: danger of serious damage to health by prolonged exposure in contact with skin and if swallowed Harmful: danger of serious damage to health by prolonged exposure through inhalation, in contact with skin and if swallowed
R 48/23
Toxic: danger of serious damage to health by prolonged exposure through inhalation
R 48/24
Toxic: danger of serious damage to health by prolonged exposure in contact with skin
R 48/25 R 48/23/24 R 48/23/25 R 48/24/25
Toxic: danger of serious damage to health by prolonged exposure if swallowed Toxic: danger of serious damage to health by prolonged exposure through inhalation and in contact with skin Toxic: danger of serious damage to health by prolonged exposure through inhalation and if swallowed Toxic: danger of serious damage to health by prolonged exposure in contact with skin and if swallowed
R 48/23/24/25 R 50/53 R 51/53
Toxic: danger of serious damage to health by prolonged exposure through inhalation, in contact with skin and if swallowed Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment
R 52/53
Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment
R 68/20
Harmful: possible risk of irreversible effects through inhalation
R 68/21 R 68/22 R 68/20/21 R 68/20/22
Harmful: possible risk of irreversible effects in contact with skin Harmful: possible risk of irreversible effects if swallowed Harmful: possible risk of irreversible effects through inhalation and in contact with skin Harmful: possible risk of irreversible effects through inhalation and if swallowed
R 68/21/22
Harmful: possible risk of irreversible effects in contact with skin and if swallowed
R 68/20/21/22
Harmful: possible risk of irreversible effects through inhalation, in contact with skin and if swallowed
Labeling of dangerous substances and preparations Safety advice concerning dangerous substances and preparations: S-phrases S1 Keep locked up S2 Keep out of the reach of children S3 Keep in a cool place S4 S5
Keep away from living quarters Keep contents under ... (appropriate liquid to be specified by the manufacturer)
S6 S7
Keep under ... (inert gas to be specified by the manufacturer) Keep container tightly closed
S8 S9 S 12 S 13
Keep container dry Keep container in a well-ventilated place Do not keep the container sealed Keep away from food, drink and animal feedingstuffs
S 14 S 15
Keep away from ... (incompat ible materials to be indicated by the manufactur er) Keep away from heat
S 16 S 17 S 18 S 20
Keep away from sources of ignition - No smoking Keep away from combustible material Handle and open container with care When using do not eat or drink
S 21 S 22
When using do not smoke Do not breathe dust
S 23 S 24 S 25 S 26
Do not breathe gas/fumes/vapour/spray (appropriate wording to be specified by the manufacturer) Avoid contact with skin Avoid contact with eyes In case of contact with eyes, rinse immediately with plenty of water and seek medical advice
S 27 S 28
Take off immediately all contaminated clothing After contact with skin, wash immediately with plenty of ... (to be specified by the manufacturer)
S 29 S 30 S 33 S 35
Do not empty into drains Never add water to this product Take precautionary measures against static discharges This material and its container m ust be disposed of in a safe way
S 36
Wear suitable protective clothing
S 37
Wear suitable gloves
S 38 S 39 S 40 S 41
In case of insufficient ventilation, wear suitable respiratory equipment Wear eye/face protection To clean the floor and all objects contaminated by this material, use ... (to be specified by the manufacturer) In case of fire and/or explosion do not breathe fumes
S 42
During fumigation/spraying wear suitable respiratory equipment (appropriate wording to be specified by the manufacturer)
S 43
In case of fire, use ... (indicate in the space the precise type of fire-fighting equipment. If water increases risk, add "Never use water")
S 45 S 46
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) If swallowed, seek medical advice immediately and show this container or label
S 47
Keep at temperature not exceeding ... °C (to be specified by the manufacturer)
S 48
Keep wet with ... (appropriate material to be specified by the manufacturer)
S 49 S 50 S 51 S 52
Keep only in the original container Do not mix with ... (to be specified by the manufacturer) Use only in well-ventilated areas Not recommended for interior use on large surface areas
S 53
Avoid exposure - obtain special inst ructions before use
S 56
Dispose of this material and its container to hazardous or special waste collection point
S 57 S 59 S 60 S 61
Use appropriate container to avoid environmental contamination Refer to manufacturer/supplier for information on recovery/recycling This material and its container must be disposed of as hazardous waste Avoid release to the environment. Refer to special instructions/safety data sheets
S 62
If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label
S 63
In case of accident by inhalation: remove casualty to fresh air and keep at rest
S 64 S 1/2 S 3/7 S 3/9/14
If swallowed, rinse mouth with water (only if the person is conscious) Keep locked up and out of the reach of children Keep container tightly closed in a cool place Keep in a cool, well-ventilated place away from ... (incompatible materials to be indicated by the manufacturer)
S 3/9/14/49
Keep only in the original container in a cool, well-ventilated place away from ... (incompatible materials to be indicated by the manufacturer)
S 3/9/49
Keep only in the original container in a cool, well-ventilated place
S 3/14
Keep in a cool place away from ... (incompatible materials to be indicated by the manufacturer)
S 7/8 S 7/9
Keep container tightly closed and dry Keep container tightly closed and in a well-ventilated place
S 7/47
Keep container tightly closed and at a temperature not exceeding ... °C (to be specified by the manufacturer)
Labeling of dangerous substances and preparations S 20/21
W hen using do not eat, drink or smoke
Labeling of dangerous substances and preparations S 24/25 S 27/28
Avoid contact with skin and eyes After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of ... (to be specified by the manufacturer)
S 29/35
Do not empty into drains; dispose of this material and its container in a safe way
S 29/56 S 36/ 37
Do not empty into drains, dispose of this material and its container at hazardous or special waste collection point W ear suitable protective clothing and gloves
S 36/37/39 S 36/39
Wear suitable protective clothing, gloves and eye/face protection Wear suitable protective clothing and eye/face protection
S 37/ 39 S 47/49
W ear suitable gloves and eye/face protection Keep only in the original container at a temperature not exceeding ... °C (to be specified by the manufacturer)
References [1] Source: EC-Directive 2001/59/EC ; Annex II [2] Source: EC-Directive 92/32/EEC [3] Source: EC-Directive 2001/59/EC ; Annex III
PTS 31.38.01.15 January 2010 Page 8 3.
PIPING CLASSES
The piping classes for ASME class ratings 150, 300, 600, 900, 1500 and 2500 are contained in separate file with this PTS number. The piping classes are in numerical order within each ASME class rating.
PTS 31.38.01.15 January 2010 Page 9 4.
REFERENCES
In this PTS, reference is made to the following publications: NOTES:
1. Unless specifically designated by date, the latest edition of each publication shall be used, together with any amendments/supplements/revisions thereto. 2. Excluded from this list are the standards referenced in the piping classes themselves, a list of which would be too extensive.
PETRONAS STANDARDS Piping classes - Basis of design
PTS 31.38.01.10
Piping - General requirements
PTS 31.38.01.11
Piping classes - Refining and chemicals
PTS 31.38.01.12
Selection of materials for life cycle performance (EP)
PTS 39.01.10.11
AMERICAN STANDARDS Pipe flanges and flanged fittings
ASME B16.5
Metallic gaskets for pipe flanges
ASME B16.20
ring-joint, spiral-wound, and jacketed Process piping
ASME B31.3
Issued by: American Society of Mechanical Engineers 345 East 47th Street New York NY 10017 USA
Standard specification for steel castings, carbon, suitable for fusion welding, for high-temperature service
ASTM A 216
Issued by: American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, USA
BRITISH STANDARDS Spiral wound gaskets for steel flanges to BS 1560
BS 3381
Issued by: British Standards Institution 389 Chiswick High Road London W4 4AL UK
INTERNATIONAL STANDARDS Metal ball valves for petroleum, petrochemical and allied industries Issued by: International Organisation for Standardisation Case Postale 56 Geneva 20 Switzerland CH-1211 Copies can also be obtained from national standards organizations.
ISO 17292
PTS 31.38.01.15 January 2010 Page 10 5.
APPENDIX A : DETAILED CHANGES PER PIPING CLASS
This index is presented as an excel spreadsheet which is attached in the attachment.
31380115- January 2010 Re vision Summa
31380115- January 2006 - Revision Summary.xls PTS 31.38.01.15, January 2010 - Revisions overview
g n i t a R
s s a l C g n i p i P e s a B
1 3 6 9 15 25 3 1 3 6 9 15 25 3 1 3 6 9 15 25 1 3 6 9 15 25 1 3 6 9 15 25 1 3 6 9 15 25 1 3 6 9 15 25 1 3 6 9 15 25 1 3 6 9 15 3 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9
14 10 14 10 14 10 14 10 1410 1410 14 11 14 12 14 12 14 12 14 12 1412 1412 14 13 14 20 14 20 14 20 14 20 1420 1420 14 22 14 22 14 22 14 22 1422 1422 14 30 14 30 14 30 14 30 1430 1430 14 32 14 32 14 32 14 32 1432 1432 14 40 14 40 14 40 14 40 1440 1440 14 41 14 41 14 41 14 41 1441 1441 14 50 14 50 14 50 14 50 1450 14 51 14 60 14 60 14 60 14 60 1460 14 70 14 70 14 70 14 70 1470 14 72 14 72 14 72 14 72 1472 14 80 14 80 14 80 14 80
Material Description Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour
e c n a w o l g l a n i t n a o r i E s o M r r S o A C
150 300 600 900 1500 2500 300 150 300 600 900 1500 2500 300 150 300 600 900 1500 2500 150 300 600 900 1500 2500 150 300 600 900 1500 2500 150 300 600 900 1500 2500 150 300 600 900 1500 2500 150 300 600 900 1500 2500 150 300 600 900 1500 300 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
r e t t e l n o i s i v e r s u o i v e r P
C C C C B B O C C C C B B C C C C B B C C C C B B B B B B A A B C C C B O B B C C B C C C C B C C C C
Previous revision date
r e t t e l n o i s i v e r t n e s e r P
Current revision date
12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999
O O O O O O O O O O O O O O O O O O O D D D D C C C C C C B B C D D D C A C C D D C O O O O O -
01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 -
g n s n i t u r t e r k e a r s t T a e / G M P
E E E E E E E E E E E E
e g n a l f e d a p S
A A A A A A A A A A A A A A A A A A A A A A A
) 1 5 3 5 S B ( l l a b s e v l a V
D
D
) ) 2 3 9 1 2 3 7 4 1 1 O O l y S I S f I ( ( r e t l l l t l a a u b b b s s s e e e v l v l v l a a a V V V
A
A
C C C C C C
C C A A
C C A A
e t a l p l a u d k c e h c s e v l a V
Legend A = added C = changed/corrected D = deleted E = extended R = reviewed/corrected Y = yes
e t a g s e v l a V Remarks
C
A
D D C
A A
D D
A
A A A A D A A A A A D
Deleted; replaced by PC 11412 Deleted; replaced by PC 31412 Deleted; replaced by PC 61412 Deleted; replaced by PC 91412 Deleted; replaced by PC 151412 Deleted; replaced by PC 251412 Deleted; replaced by PC 31413 New New New New New New New Deleted; replaced by PC 11422 Deleted; replaced by PC 31422 Deleted; replaced by PC 61422 Deleted; replaced by PC 91422 Deleted; replaced by PC 151422 Deleted; replaced by PC 251422 New New New New New New Deleted; replaced by PC 11432 Deleted; replaced by PC 31432 Deleted; replaced by PC 61432 Deleted; replaced by PC 91432 Deleted; replaced by PC 151432 Deleted; replaced by PC 251432 New New New New New New Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Deleted; replaced by PC 11472 Deleted; replaced by PC 31472 Deleted; replaced by PC 61472 Deleted; replaced by PC 91472 Deleted; replaced by PC 151472 New New New New New Deleted; replaced by PC 11482 Deleted; replaced by PC 31482 Deleted; replaced by PC 61482 Deleted; replaced by PC 91482
31380115- January 2006 - Revision Summary.xls 15 1 3 6 9 15 25 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 9 15 25 9 15 25 9 15 25 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15
1480 14 82 14 82 14 82 14 82 1482 1485 14 90 14 90 14 90 14 90 1490 14 92 14 92 14 92 14 92 1492 15 00 15 00 15 00 15 00 1500 15 01 15 01 15 01 15 01 1501 15 02 15 02 15 02 15 02 1502 15 03 15 03 15 03 15 03 1503 15 20 1520 1520 15 21 1521 1521 15 22 1522 1522 34 10 34 10 34 10 34 10 3410 34 11 34 11 34 11 34 11 3411 34 20 34 20 34 20 34 20 3420 34 21 34 21 34 21 34 21 3421 34 30 34 30 34 30 34 30 3430 34 50 34 50 34 50 34 50 3450 34 51 34 51 34 51 34 51 3451 34 60 34 60 34 60 34 60 3460
Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel Sour Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Stainl steel AISI 316 Stainl steel AISI 316 Stainl steel AISI 316 Stainl steel AISI 316 Stainl steel AISI 316 Stainl steel AISI 316 Stainl steel AISI 316 Stainl steel AISI 316 Stainl steel AISI 316 Stainl steel AISI 316 Stainl steel AISI 316 Sour Stainl steel AISI 316 Sour Stainl steel AISI 316 Sour Stainl steel AISI 316 Sour Stainl steel AISI 316 Sour Stainl steel AISI 316 Sour Stainl steel AISI 316 Sour Stainl steel AISI 316 Sour Stainl steel AISI 316 Sour Stainl steel AISI 316 Sour Stainl steel AISI 316 Stainl steel AISI 316 Stainl steel AISI 316 Stainl steel AISI 316 Stainl steel AISI 316 Stainl steel AISI 316 LT Stainl steel AISI 316 LT Stainl steel AISI 316 LT Stainl steel AISI 316 LT Stainl steel AISI 316 LT Stainl steel AISI 316 LT Stainl steel AISI 316 LT Stainl steel AISI 316 LT Stainl steel AISI 316 LT Stainl steel AISI 316 LT Stainl steel AISI 316 LT Sour Stainl steel AISI 316 LT Sour Stainl steel AISI 316 LT Sour Stainl steel AISI 316 LT Sour Stainl steel AISI 316 LT Sour
1500 150 300 600 900 1500 2500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 900 1500 2500 900 1500 2500 900 1500 2500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500
1 1 1 1 1 1 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
B C C C C B C C C C B B B B B A C B B B A A C C C C B B B B B A C B C C B C C C C B C C C C B
12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999
O O O O O O O O O O O O O O O O O O O O O C B B O O O O O O O O O O O O O D C D D C O O O O O -
01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 00 6 01 /2 00 6 01 /2 00 6 0 1/2 00 6 0 1/2 00 6 0 1/2 00 6 0 1/2 00 6 0 1/2 00 6 0 1/2 00 6 0 1/2 00 6 01/2006 01/2006 01/2006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 00 6 01 /2 00 6 01 /2 00 6 01 /2 00 6 01 /2 00 6 01/2006 01/2006 01/2006 01/2006 01/2006 0 1/2 00 6 0 1/2 00 6 0 1/2 00 6 0 1/2 00 6 0 1/2 00 6 -
C C C C C
A A A A A
D
A
A A A A D
Deleted; replaced by PC 151482 New New New New New New Deleted; replaced by PC 11492 Deleted; replaced by PC 31492 Deleted; replaced by PC 61492 Deleted; replaced by PC 91492 Deleted; replaced by PC 151492 New New New New New Deleted; replaced by PC 11502 Deleted; replaced by PC 31502 Deleted; replaced by PC 61502 Deleted; replaced by PC 91502 Deleted; replaced by PC 151502 Deleted; replaced by PC 11503 Deleted; replaced by PC 31503 Deleted; replaced by PC 61503 Deleted; replaced by PC 91503 Deleted; replaced by PC 151503 New New New New New New New New New New Hold Hold Hold Revised (HOLD) Revised (HOLD) Revised (HOLD) New (HOLD) New (HOLD) New (HOLD) Deleted; replaced by PC 13411 Deleted; replaced by PC 33411 Deleted; replaced by PC 63411 Deleted; replaced by PC 93411 Deleted; replaced by PC 153411 New New New New New Deleted; replaced by PC 13421 Deleted; replaced by PC 33421 Deleted; replaced by PC 63421 Deleted; replaced by PC 93421 Deleted; replaced by PC 153421 New New New New New Revised Revised Revised Revised Revised Deleted; replaced by PC 13451 Deleted; replaced by PC 33451 Deleted; replaced by PC 63451 Deleted; replaced by PC 93451 Deleted; replaced by PC 153451 New New New New New Deleted; replaced by PC 13461 Deleted; replaced by PC 33461 Deleted; replaced by PC 63461 Deleted; replaced by PC 93461 Deleted; replaced by PC 153461
31380115- January 2006 - Revision Summary.xls 1 3 6 9 15 1 3 6 9 1 1 3 6 9 15 25 1 3 6 9 15 25 1 3 6 9 15 25 1 3 6 9 15 25 1 6 9 1 25 1 3 6 9 1 1
34 61 34 61 34 61 34 61 3461 36 20 36 20 36 20 36 20 36 25 38 31 38 31 38 31 38 31 3831 3831 38 32 38 32 38 32 38 32 3832 3832 38 33 38 33 38 33 38 33 3833 3833 38 34 38 34 38 34 38 34 3834 3834 64 10 65 20 65 20 65 60 6560 66 20 66 20 66 20 66 20 8410 8420
Stainl steel AISI 316 LT Sour Stainl steel AISI 316 LT Sour Stainl steel AISI 316 LT Sour Stainl steel AISI 316 LT Sour Stainl steel AISI 316 LT Sour Stainl steel 6Mo LT Sour [A] Stainl steel 6Mo LT Sour [A] Stainl steel 6Mo LT Sour [A] Stainl steel 6Mo LT Sour [A] Stainl steel 6Mo LT Sour [A] Duplex stainless steel Duplex stainless steel Duplex stainless steel Duplex stainless steel Duplex stainless steel Duplex stainless steel Duplex stainless steel Sour Duplex stainless steel Sour Duplex stainless steel Sour Duplex stainless steel Sour Duplex stainless steel Sour Duplex stainless steel Sour Duplex stainless steel LT Duplex stainless steel LT Duplex stainless steel LT Duplex stainless steel LT Duplex stainless steel LT Duplex stainless steel LT Duplex stainless steel LT Sour Duplex stainless steel LT Sour Duplex stainless steel LT Sour Duplex stainless steel LT Sour Duplex stainless steel LT Sour Duplex stainless steel LT Sour Titanium Alloy 625 LT Sour [A] Alloy 625 LT Sour [A] Alloy 625 LT Sour Alloy 625 LT Sour Alloy 825 LT Sour [A] Allo 825 LT Sour A Alloy 825 LT Sour [A] Alloy 825 LT Sour [A] Carbon steel Galvanised Carbon steel Galvanised
150 300 600 900 1500 150 300 600 900 150 150 300 600 900 1500 2500 150 300 600 900 1500 2500 150 300 600 900 1500 2500 150 300 600 900 1500 2500 150 600 900 150 2500 150 300 600 900 150 150
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
B B B B B B B B B B B B B B B B B B B B B B B B A C C
12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999 12/1999
O O O O O O O O O O C C C C C C C C C C C C C C C C C C C C C C C C B O O O O O O O O -
01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 01 /2 006 -
C C C C C C C C C C C C C C C C C C C C C C C C C
E E E E E E E E E E E E E E E E E E E E E E E E
D
A
C C C
C C A A D D
D
A
C C C
C C A A D D
D
A
C C C
C C A A D D
D
A
C C C
C C A A D D
D
A
New New New New New New New New New New Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised Revised New New New New New New New New Deleted; see PC 18011 Deleted; see PC 18011
General changes (not listed above): 1 Assemblies reviewed and changed, where applicable 2 Ball valves with carbon steel electroless nickel plated balls have been replaced by stainless steel balls; see PTS 39.01.10.11 - Appendix 9 3 Boltsets reviewed and changed, where applicable 4 BS5351 ball valves (withdrawn) replaced by ISO17292 ball valves 5 Butterfly valves triple excentric: minimum size changed to DN 200 6 Graphite tanged insert gaskets replaced by spiral wound gaskets 7 Level displacer chambers removed 8 Level gauges removed; see PTS 31.38.01.10 9 P/T rating reviewed and changed, where applicable 10 Pipe nipples removed 11 Spades added 12 Spectacle blinds limited; see PTS 31.38.01.11, para 8.7.2 13 Spiral wound gaskets changed to ASME B16.20; standardised on innerring and centring ring 14 Swing type checkvalves limited to DN 250 in ball valve piping classes due to the use of dual plate check valves 15 Thermowells replaced; cover flanges removed 16 Small bore ball valves standardised on full bore
Headings
Ra 1 3 6 9 15 25 3 1 3 6 9 15 25 3 1 3 6 9 15 25 1 3 6 9 15 25 1 3 6 9 15 25 1 3 6 9 15 25 1 1 3 3 6 6 9 9 15 15 25 25 1 1 3 3 6 6 9 9 15 15 25 25 1 1 3 3 6
Base 1410 1410 1410 1410 1410 1410 1411 1412 1412 1412 1412 1412 1412 1413 1420 1420 1420 1420 1420 1420 1422 1422 1422 1422 1422 1422 1430 1430 1430 1430 1430 1430 1432 1432 1432 1432 1432 1432 1440 1440 1440 1440 1440 1440 1440 1440 1440 1440 1440 1440 1441 1441 1441 1441 1441 1441 1441 1441 1441 1441 1441 1441 1450 1450 1450 1450 1450
Material description CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel CARBON STEEL SOUR CARBON STEEL SOUR CARBON STEEL SOUR CARBON STEEL SOUR CARBON STEEL SOUR CARBON STEEL SOUR Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour Carbon steel Sour CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL CARBON STEEL Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR Carbon steel CARBON STEEL Carbon steel CARBON STEEL Carbon steel
Ca 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 1 1 1 1 1
Class 150 300 600 900 1500 2500 300 150 300 600 900 1500 2500 300 150 300 600 900 1500 2500 150 300 600 900 1500 2500 150 300 600 900 1500 2500 150 300 600 900 1500 2500 150 150 300 300 600 600 900 900 1500 1500 2500 2500 150 150 300 300 600 600 900 900 1500 1500 2500 2500 150 150 300 300 600
Br BD BF BS BS BS BS BF BD BF BS BS BS BS BF BD BF BS BS BS BS BD BF BS BS BS BS BL BP BS BS BS BS BL BP BS BS BS BS BL BL BP BP BS BS BS BS BS BS BS BS BL BL BP BP BS BS BS BS BS BS BS BS BD BD BF BF BS
Revision C C C C B B O O O O O O O O C C C C B B O O O O O O C C C C B B O O O O O O D C D C D C D C C B C B C B C B C B C B B A B A C B D C D
01/2000 01/2000 01/2000 01/2000 01/2000 01/2000 01/2000 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2000 01/2000 01/2000 01/2000 01/2000 01/2000 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2000 01/2000 01/2000 01/2000 01/2000 01/2000 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006
Headings
6 9 9 15 15 3 3 1 1 3 3 6 6 9 9 15 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 9
1450 1450 1450 1450 1450 1451 1451 1460 1460 1460 1460 1460 1460 1460 1460 1460 1460 1470 1470 1470 1470 1470 1472 1472 1472 1472 1472 1480 1480 1480 1480 1480 1482 1482 1482 1482 1482 1490 1490 1490 1490 1490 1492 1492 1492 1492 1492 1500 1500 1500 1500 1500 1501 1501 1501 1501 1501 1502 1502 1502 1502 1502 1503 1503 1503 1503 1503 1520
CARBON STEEL Carbon steel CARBON STEEL Carbon steel CARBON STEEL Carbon steel CARBON STEEL Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR CARBON STEEL LT F-GR CARBON STEEL LT F-GR CARBON STEEL LT F-GR CARBON STEEL LT F-GR CARBON STEEL LT F-GR Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr CARBON STEEL LT F-GR SOUR CARBON STEEL LT F-GR SOUR CARBON STEEL LT F-GR SOUR CARBON STEEL LT F-GR SOUR CARBON STEEL LT F-GR SOUR Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour CARBON STEEL LT F-GR CARBON STEEL LT F-GR CARBON STEEL LT F-GR CARBON STEEL LT F-GR CARBON STEEL LT F-GR Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr Carbon steel LT F-Gr CARBON STEEL LT F-GR SOUR CARBON STEEL LT F-GR SOUR CARBON STEEL LT F-GR SOUR CARBON STEEL LT F-GR SOUR CARBON STEEL LT F-GR SOUR CARBON STEEL LT F-GR SOUR CARBON STEEL LT F-GR SOUR CARBON STEEL LT F-GR SOUR CARBON STEEL LT F-GR SOUR CARBON STEEL LT F-GR SOUR Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour Carbon steel LT F-Gr Sour CARBON STEEL SOUR
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
600 900 900 1500 1500 300 300 150 150 300 300 600 600 900 900 1500 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 900
BS BS BS BS BS BF BF BD BD BF BF BS BS BS BS BS BS BC BF BS BS BS BR BF BS BS BS BC BF BS BS BS BC BF BS BS BS BM BP BS BS BS BM BP BS BS BS BM BP BS BS BS BM BP BS BS BS BM BP BS BS BS BM BP BS BS BS BS
C D C C B A O C B C B D C D C C B C C C C B O O O O O C C C C B O O O O O C C C C B O O O O O C C C C B B B B B A O O O O O O O O O O C
01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2000 01/2000 01/2000 01/2000 01/2000 01/2006 01/2006 01/2006 01/2006 01/2006 01/2000 01/2000 01/2000 01/2000 01/2000 01/2006 01/2006 01/2006 01/2006 01/2006 01/2000 01/2000 01/2000 01/2000 01/2000 01/2006 01/2006 01/2006 01/2006 01/2006 01/2000 01/2000 01/2000 01/2000 01/2000 01/2000 01/2000 01/2000 01/2000 01/2000 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2000
Headings
15 25 9 9 15 15 25 25 9 15 25 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 1 3 3 6 6 9 9 15 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 15 1 3 6 9 1 1 1
1520 1520 1521 1521 1521 1521 1521 1521 1522 1522 1522 3410 3410 3410 3410 3410 3411 3411 3411 3411 3411 3420 3420 3420 3420 3420 3421 3421 3421 3421 3421 3430 3430 3430 3430 3430 3430 3430 3430 3430 3430 3450 3450 3450 3450 3450 3451 3451 3451 3451 3451 3460 3460 3460 3460 3460 3461 3461 3461 3461 3461 3620 3620 3620 3620 3625 3831 3831
CARBON STEEL SOUR CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour CARBON STEEL SOUR Carbon steel Sour Carbon steel Sour Carbon steel Sour STAINL STEEL AISI 316 STAINL STEEL AISI 316 STAINL STEEL AISI 316 STAINL STEEL AISI 316 STAINL STEEL AISI 316 Stainl steel AISI 316 Stainl steel AISI 316 Stainl steel AISI 316 Stainl steel AISI 316 Stainl steel AISI 316 STAINL STEEL AISI 316 SOUR STAINL STEEL AISI 316 SOUR STAINL STEEL AISI 316 SOUR STAINL STEEL AISI 316 SOUR STAINL STEEL AISI 316 SOUR Stainl steel AISI 316 Sour Stainl steel AISI 316 Sour Stainl steel AISI 316 Sour Stainl steel AISI 316 Sour Stainl steel AISI 316 Sour Stainl steel AISI 316 STAINL STEEL AISI 316 Stainl steel AISI 316 STAINL STEEL AISI 316 Stainl steel AISI 316 STAINL STEEL AISI 316 Stainl steel AISI 316 STAINL STEEL AISI 316 Stainl steel AISI 316 STAINL STEEL AISI 316 STAINL STEEL AISI 316 LT STAINL STEEL AISI 316 LT STAINL STEEL AISI 316 LT STAINL STEEL AISI 316 LT STAINL STEEL AISI 316 LT Stainl steel AISI 316 LT Stainl steel AISI 316 LT Stainl steel AISI 316 LT Stainl steel AISI 316 LT Stainl steel AISI 316 LT STAINL STEEL AISI 316 LT SOUR STAINL STEEL AISI 316 LT SOUR STAINL STEEL AISI 316 LT SOUR STAINL STEEL AISI 316 LT SOUR STAINL STEEL AISI 316 LT SOUR Stainl steel AISI 316 LT Sour Stainl steel AISI 316 LT Sour Stainl steel AISI 316 LT Sour Stainl steel AISI 316 LT Sour Stainl steel AISI 316 LT Sour Stainl steel 6Mo LT Sour [A] Stainl steel 6Mo LT Sour [A] Stainl steel 6Mo LT Sour [A] Stainl steel 6Mo LT Sour [A] Stainl steel 6Mo LT Sour [A] Duplex stainless steel DUPLEX UNS S31803
3 3 3 3 3 3 3 3 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
1500 2500 900 900 1500 1500 2500 2500 900 1500 2500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 150 300 300 600 600 900 900 1500 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 150 150 150
BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS CC CC CA CA CC BS BS
B B C B B A B A O O O C C C C B O O O O O B B B C A O O O O O D C C B D C D C C B C C C C B O O O O O C C C C B O O O O O O O O O O C B
01/2000 01/2000 01/2000 01/2000 01/2000
01/2000 01/2000 01/2000 01/2000 01/2000 01/2006 01/2006 01/2006 01/2006 01/2006 01/2000 01/2000 01/2000 01/2000 01/2000 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2000 01/2000 01/2000 01/2000 01/2000 01/2006 01/2006 01/2006 01/2006 01/2006 01/2000 01/2000 01/2000 01/2000 01/2000 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2000
Headings
3 3 6 6 9 9 15 15 25 25 1 1 3 3 6 6 9 9 15 15 25 25 1 1 3 3 6 6 9 9 15 15 25 25 1 1 3 3 6 6 9 9 15 15 25 25 1 6 9 1 25 1 3 6 9 1 1
3831 3831 3831 3831 3831 3831 3831 3831 3831 3831 3832 3832 3832 3832 3832 3832 3832 3832 3832 3832 3832 3832 3833 3833 3833 3833 3833 3833 3833 3833 3833 3833 3833 3833 3834 3834 3834 3834 3834 3834 3834 3834 3834 3834 3834 3834 6410 6520 6520 6560 6560 6620 6620 6620 6620 8410 8420
Duplex stainless steel DUPLEX UNS S31803 Duplex stainless steel DUPLEX UNS S31803 Duplex stainless steel DUPLEX UNS S31803 Duplex stainless steel DUPLEX UNS S31803 Duplex stainless steel DUPLEX UNS S31803 Duplex stainless steel Sour DUPLEX UNS S31803 SOUR Duplex stainless steel Sour DUPLEX UNS S31803 SOUR Duplex stainless steel Sour DUPLEX UNS S31803 SOUR Duplex stainless steel Sour DUPLEX UNS S31803 SOUR Duplex stainless steel Sour DUPLEX UNS S31803 SOUR Duplex stainless steel Sour DUPLEX UNS S31803 SOUR Duplex stainless steel LT DUPLEX UNS S31803 LT Duplex stainless steel LT DUPLEX UNS S31803 LT Duplex stainless steel LT DUPLEX UNS S31803 LT Duplex stainless steel LT DUPLEX UNS S31803 LT Duplex stainless steel LT DUPLEX UNS S31803 LT Duplex stainless steel LT DUPLEX UNS S31803 LT Duplex stainless steel LT Sour DUPLEX UNS S31803 LT SOUR Duplex stainless steel LT Sour DUPLEX UNS S31803 LT SOUR Duplex stainless steel LT Sour DUPLEX UNS S31803 LT SOUR Duplex stainless steel LT Sour DUPLEX UNS S31803 LT SOUR Duplex stainless steel LT Sour DUPLEX UNS S31803 LT SOUR Duplex stainless steel LT Sour DUPLEX UNS S31803 LT SOUR Titanium Alloy 625 LT Sour [A] Alloy 625 LT Sour [A] Alloy 625 LT Sour Alloy 625 LT Sour Alloy 825 LT Sour [A] Alloy 825 LT Sour [A] Alloy 825 LT Sour [A] Alloy 825 LT Sour [A] CARBON STEEL GALVANISED CARBON STEEL GALVANISED
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
300 300 600 600 900 900 1500 1500 2500 2500 150 150 300 300 600 600 900 900 1500 1500 2500 2500 150 150 300 300 600 600 900 900 1500 1500 2500 2500 150 150 300 300 600 600 900 900 1500 1500 2500 2500 150 600 900 150 2500 150 300 600 900 150 150
BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS ET CA CA CB BS CB CB CA CA EB EB
C B C B C B C B C B C B C B C B C B C B C B C B C B C B C B C B C B C B C B C B C B C B C B B O O O O O O O O B B
01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2000 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 01/2006 12/1998 12/1998
Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev Rev
1 1 1 1 1 1 1 1 1 3 3 3 3 3 3 3 3 3 3 6 6 6 6 6 6 6 6 6 9 9 9 9 9 9 9 9 9 15 15 15 15
1440 1441 1450 1460 3430 3831 3832 3833 3834 1440 1441 1450 1451 1460 3430 3831 3832 3833 3834 1440 1441 1450 1460 3430 3831 3832 3833 3834 1440 1441 1450 1460 3430 3831 3832 3833 3834 3831 3832 3833 3834
Shname TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND TWND
Apcode DN1 DN2 Printflag NF22 Y NF22 Y NF22 Y NF22 Y NF22 Y DS31 Y DS31 Y DS31 Y DS31 Y NF22 Y NF22 Y NF22 Y NF22 Y NF22 Y NF22 Y DS31 Y DS31 Y DS31 Y DS31 Y NF22 Y NF22 Y NF22 Y NF22 Y NF22 Y DS31 Y DS31 Y DS31 Y DS31 Y NF22 Y NF22 Y NF22 Y NF22 Y NF22 Y DS31 Y DS31 Y DS31 Y DS31 Y DS31 Y DS31 Y DS31 Y DS31 Y
Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed Changed
CLASSNO
TEMP
LIMIT
11410
0
19.6
11410
50
19.2
11410
75
18.4
11410
100
17.6
11410
120
16.9
11420
0
19.6
11420
50
19.2
11420
75
18.4
11420
100
17.6
11420
120
16.9
11430
0
19.6
11430
50
19.2
11430
75
18.4
11430
100
17.6
11430
120
16.9
11440
0
19.6
11440
50
19.2
11440
75
18.4
11440
100
17.6
11440
120
16.9
11441
0
19.6
11441
50
19.2
11441
75
18.4
11441
100
17.6
11441
120
16.9
11450
0
19.6
11450
50
19.2
11450
75
18.4
11450
100
17.6
11450
120
16.9
11450
150
15.8
11450
200
13.9
11460
0
19.6
11460
50
19.2
11460
75
18.4
11460
100
17.6
11460
120
16.9
11460
150
15.8
11460
200
13.9
11470
-50
18.2
11470
0
18.2
11470
50
18.0
11470
75
17.5
11470
100
17.0
11470
120
16.5
11480
-50
18.2
11480
0
18.2
11480
50
18.0
11480
75
17.5
11480
100
17.0
11480
120
16.5
11490
-50
18.2
11490
0
18.2
11490
50
18.0
11490
75
17.5
11490
100
17.0
11490
120
16.5
11500
-50
18.2
11500
0
18.2
11500
50
18.0
11500
75
17.5
11500
100
17.0
11500
120
16.5
11501
-50
18.2
11501
0
18.2
11501
50
18.0
11501
75
17.5
11501
100
17.0
11501
120
16.5
13410
-20
18.9
13410
0
18.9
13410
50
18.3
13410
75
17.1
13410
100
16.0
13410
120
15.5
13420
-20
18.9
13420
0
18.9
13420
50
18.3
13420
75
17.1
13420
100
16.0
13420
120
15.5
13430
-20
18.9
13430
0
18.9
13430
50
18.3
13430
75
17.1
13430
100
16.0
13430
120
15.5
13430
150
14.7
13430
200
13.5
13450
-100
18.9
13450
0
18.9
13450
50
18.3
13450
75
17.1
13450
100
16.0
13450
120
15.5
13460
-73
18.9
13460
0
18.9
13460
50
18.3
13460
75
17.1
13460
100
16.0
13460
120
15.5
13831
-20
19.9
13831
0
19.9
13831
50
19.5
13831
75
18.6
13831
100
17.6
13831
120
16.9
13832
-20
19.9
13832
0
19.9
13832
50
19.5
13832
75
18.6
13832
100
17.6
13832
120
16.9
13833
-50
19.9
13833
0
19.9
13833
50
19.5
13833
75
18.6
13833
100
17.6
13833
120
16.9
13834
-50
19.9
13834
0
19.9
13834
50
19.5
13834
75
18.6
13834
100
17.6
13834
120
16.9
151410
0
254.2
151410
50
250.4
151410
75
240.2
151410
100
231.9
151410
120
229.5
151420
0
222.3
151420
120
222.3
151430
0
252.4
151430
50
250.4
151430
75
240.2
151430
100
231.9
151430
120
229.5
151440
0
222.3
151440
120
222.3
151441
0
222.3
151441
120
222.3
151450
0
254.2
151450
50
250.4
151450
75
240.2
151450
100
231.9
151450
120
229.5
151450
150
226.0
151450
200
219.1
151460
0
222.3
151460
150
222.3
151460
200
218.8
151470
-50
239.2
151470
0
239.2
151470
50
236.3
151470
75
230.4
151470
100
225.4
151470
120
223.1
151480
-50
222.3
151480
75
222.3
151480
100
222.1
151480
120
221.2
151490
-50
239.2
151490
0
239.2
151490
50
236.3
151490
75
230.4
151490
100
225.4
151490
120
223.1
151500
-50
222.3
151500
75
222.3
151500
100
222.1
151500
120
221.2
151501
-50
222.3
151501
75
222.3
151501
100
222.1
151501
120
221.2
151520
0
222.3
151520
120
222.3
151521
0
222.3
151521
120
222.3
153410
-20
248.2
153410
0
248.2
153410
50
240.5
153410
75
224.8
153410
100
210.9
153410
120
203.4
153410
-20
236.6
153410
0
236.6
153410
50
236.6
153410
75
224.8
153410
100
210.9
153410
120
203.4
153410
-20
228.4
153410
0
228.4
153410
50
228.4
153410
75
224.8
153410
100
210.9
153410
120
203.4
153420
-20
222.3
153420
0
222.3
153420
50
220.4
153420
75
216.3
153420
100
210.9
153420
120
203.4
153430
-20
248.2
153430
0
248.2
153430
50
240.5
153430
75
224.8
153430
100
210.9
153430
120
203.4
153430
150
192.4
153430
200
178.4
153430
-20
236.6
153430
0
236.6
153430
50
236.6
153430
75
224.8
153430
100
210.9
153430
120
203.4
153430
150
192.4
153430
200
178.4
153430
-20
228.4
153430
0
228.4
153430
50
228.4
153430
75
224.8
153430
100
210.9
153430
120
203.4
153430
150
192.4
153430
200
178.4
153450
-100
248.2
153450
0
248.2
153450
50
240.5
153450
75
224.8
153450
100
210.9
153450
120
203.4
153450
-100
236.6
153450
0
236.6
153450
50
236.6
153450
75
224.8
153450
100
210.9
153450
120
203.4
153460
-73
222.3
153460
0
222.3
153460
50
220.4
153460
75
216.3
153460
100
210.9
153460
120
203.4
153831
-20
258.5
153831
0
258.5
153831
50
256.2
153831
75
251.6
153831
100
245.9
153831
120
239.1
153832
-20
153832
120
222.3 222.3
153833
-50
253.9
153833
50
253.9
153833
75
251.6
153833
100
245.9
153833
120
239.1
153834
-50
222.3
153834
120
222.3
16410
0
18.9
16410
50
18.4
18410
0
15.5
18410
60
15.5
18420
0
7.0
18420
60
7.0
251410
0
425.4
251410
50
417.1
251410
75
400.2
251410
100
386.5
251410
120
382.7
251420
0
308.8
251420
120
308.8
251430
0
425.4
251430
50
417.1
251430
75
400.2
251430
100
386.5
251430
120
382.7
251440
0
308.8
251440
120
308.8
251440
0
278.4
251440
120
278.4
251441
0
308.8
251441
120
308.8
251441
0
278.4
251441
120
278.4
251520
0
308.8
251520
120
308.8
251520
0
278.4
251520
120
278.4
251521
0
308.8
251521
120
308.8
251521
0
278.4
251521
120
278.4
253831
-20
425.0
253831
50
425.0
253831
75
419.3
253831
100
409.8
253831
120
398.4
253832
-20
308.8
253832
120
308.8
253833
-50
425.0
253833
50
425.0
253833
75
419.3
253833
100
409.8
253833
120
398.4
253834
-50
308.8
253834
120
308.8
31410
0
50.1
31410
50
50.0
31410
75
48.0
31410
100
46.3
31410
120
45.8
31411
0
50.8
31411
50
50.0
31411
75
48.0
31411
100
46.3
31411
120
45.8
31411
0
42.9
31411
50
42.9
31411
75
42.9
31411
100
42.9
31411
120
42.9
31420
0
50.5
31420
50
50.0
31420
75
48.0
31420
100
46.3
31420
120
45.8
31430
0
51.0
31430
50
50.0
31430
75
48.0
31430
100
46.3
31430
120
45.8
31440
0
51.0
31440
50
50.0
31440
75
48.0
31440
100
46.3
31440
120
45.8
31441
0
51.0
31441
50
50.0
31441
75
48.0
31441
100
46.3
31441
120
45.8
31450
0
50.1
31450
50
50.0
31450
75
48.0
31450
100
46.3
31450
120
45.8
31450
150
45.1
31450
200
43.8
31451
0
50.8
31451
50
50.0
31451
75
48.0
31451
100
46.3
31451
120
45.8
31451
150
45.1
31451
200
43.8
31451
0
42.9
31451
50
42.9
31451
75
42.9
31451
100
42.9
31451
120
42.9
31451
150
42.9
31451
200
42.9
31460
0
50.5
31460
50
50.0
31460
75
48.0
31460
100
46.3
31460
120
45.8
31460
150
45.1
31460
200
43.8
31470
-50
47.9
31470
0
47.9
31470
50
47.3
31470
75
46.0
31470
100
45.0
31470
120
44.6
31480
-50
47.9
31480
0
47.9
31480
50
47.3
31480
75
46.0
31480
100
45.0
31480
120
44.6
31490
-50
47.9
31490
0
47.9
31490
50
47.3
31490
75
46.0
31490
100
45.0
31490
120
44.6
31500
-50
47.9
31500
0
47.9
31500
50
47.3
31500
75
46.0
31500
100
45.0
31500
120
44.6
31501
-50
47.9
31501
0
47.9
31501
50
47.3
31501
75
46.0
31501
100
45.0
31501
120
44.6
33410
-20
49.6
33410
0
49.6
33410
50
48.1
33410
75
45.0
33410
100
42.2
33410
120
40.7
33420
-20
49.6
33420
0
49.6
33420
50
48.1
33420
75
45.0
33420
100
42.2
33420
120
40.7
33430
-20
49.6
33430
0
49.6
33430
50
48.1
33430
75
45.0
33430
100
42.2
33430
120
40.7
33430
150
38.5
33430
200
35.7
33450
-100
49.6
33450
0
49.6
33450
50
48.1
33450
75
45.0
33450
100
42.2
33450
120
40.7
33460
-73
49.6
33460
0
49.6
33460
50
48.1
33460
75
45.0
33460
100
42.2
33460
120
40.7
33831
-20
51.7
33831
0
51.7
33831
50
51.2
33831
75
50.3
33831
100
49.1
33831
120
47.8
33832
-20
51.7
33832
0
51.7
33832
50
51.2
33832
75
50.3
33832
100
49.1
33832
120
47.8
33833
-50
51.7
33833
0
51.7
33833
50
51.2
33833
75
50.3
33833
100
49.1
33833
120
47.8
33834
-50
51.7
33834
0
51.7
33834
50
51.2
33834
75
50.3
33834
100
49.1
33834
120
47.8
61410
0
102.0
61410
50
100.0
61410
75
96.0
61410
100
92.7
61410
120
91.9
61420
0
99.1
61420
50
97.7
61420
75
95.0
61420
100
92.7
61420
120
91.9
61430
0
102.0
61430
50
100.0
61430
75
96.0
61430
100
92.7
61430
120
91.9
61440
0
99.1
61440
50
97.7
61440
75
95.0
61440
100
92.7
61440
120
91.9
61441
0
99.1
61441
50
97.7
61441
75
95.0
61441
100
92.7
61441
120
91.9
61450
0
102.0
61450
50
100.0
61450
75
96.0
61450
100
92.7
61450
120
91.9
61450
150
90.6
61450
200
87.8
61460
0
99.1
61460
50
97.7
61460
75
95.0
61460
100
92.7
61460
120
91.9
61460
150
90.6
61460
200
87.8
61470
-50
95.8
61470
0
95.8
61470
50
94.7
61470
75
92.3
61470
100
90.3
61470
120
89.3
61480
-50
95.8
61480
0
95.8
61480
50
94.7
61480
75
92.3
61480
100
90.3
61480
120
89.3
61490
-50
95.8
61490
0
95.8
61490
50
94.7
61490
75
92.3
61490
100
90.3
61490
120
89.3
61500
-50
95.8
61500
0
95.8
61500
50
94.7
61500
75
92.3
61500
100
90.3
61500
120
89.3
61501
-50
95.8
61501
0
95.8
61501
50
94.7
61501
75
92.3
61501
100
90.3
61501
120
89.3
63410
-20
99.2
63410
0
99.2
63410
50
96.2
63410
75
90.0
63410
100
84.5
63410
120
81.5
63420
-20
99.1
63420
0
99.1
63420
50
96.1
63420
75
89.9
63420
100
84.5
63420
120
81.5
63430
-20
99.2
63430
0
99.2
63430
50
96.2
63430
75
90.0
63430
100
84.5
63430
120
81.5
63430
150
77.0
63430
200
71.1
63450
-100
99.2
63450
0
99.2
63450
50
96.2
63450
75
90.0
63450
100
84.5
63450
120
81.5
63460
-73
99.1
63460
0
99.1
63460
50
96.1
63460
75
89.9
63460
100
84.5
63460
120
81.5
63831
-20
103.4
63831
0
103.4
63831
50
102.5
63831
75
100.6
63831
100
98.3
63831
120
95.6
63832
-20
99.1
63832
75
99.1
63832
100
63832
120
98.1 95.1
63833
-50
103.4
63833
0
103.4
63833
50
102.5
63833
75
100.6
63833
100
98.3
63833
120
95.6
63834
-50
99.1
63834
75
99.1
63834
100
98.1
63834
120
95.1
91410
0
153.0
91410
50
150.1
91410
75
144.0
91410
100
139.1
91410
120
137.8
91420
0
137.5
91420
75
137.5
91420
100
137.3
91420
120
136.7
91430
0
153.0
91430
50
150.1
91430
75
144.0
91430
100
139.1
91430
120
137.8
91440
0
137.5
91440
75
137.5
91440
100
137.3
91440
120
136.7
91441
0
137.5
91441
75
137.5
91441
100
137.3
91441
120
136.7
91450
0
153.0
91450
50
150.1
91450
75
144.0
91450
100
139.1
91450
120
137.8
91450
150
135.7
91450
200
131.3
91460
0
137.5
91460
75
137.5
91460
100
137.3
91460
120
136.7
91460
150
135.7
91460
200
131.3
91470
-50
143.7
91470
0
143.7
91470
50
142.0
91470
75
138.4
91470
100
135.3
91470
120
134.0
91480
-50
137.5
91480
0
137.5
91480
50
137.1
91480
75
136.3
91480
100
135.3
91480
120
134.0
91490
-50
143.7
91490
0
143.7
91490
50
142.0
91490
75
138.4
91490
100
91490
120
135.3 134.0
91500
-50
137.5
91500
0
137.5
91500
50
137.1
91500
75
136.3
91500
100
135.3
91500
120
134.0
91501
-50
137.5
91501
0
137.5
91501
50
137.1
91501
75
136.3
91501
100
135.3
91501
120
134.0
91520
0
137.5
91520
75
137.5
91520
100
137.3
91520
120
136.7
91521
0
137.5
91521
75
137.5
91521
100
137.3
91521
120
136.7
93410
-20
148.9
93410
0
148.9
93410
50
144.3
93410
75
135.0
93410
100
126.7
93410
120
122.2
93420
-20
137.5
93420
0
137.5
93420
50
135.4
93420
75
131.3
93420
100
126.7
93420
120
122.2
93430
-20
148.9
93430
0
148.9
93430
50
144.3
93430
75
135.0
93430
100
126.7
93430
120
122.2
93430
150
115.6
93430
200
106.9
93450
-100
148.9
93450
0
148.9
93450
50
144.3
93450
75
135.0
93450
100
126.7
93450
120
122.2
93460
-73
137.5
93460
0
137.5
93460
50
135.4
93460
75
131.3
93460
100
126.7
93460
120
122.2
93831
-20
155.1
93831
75
155.1
93831
100
154.5
93831
120
152.9
93832
-20
137.5
93832
120
137.5
93833
-50
152.7
93833
50
152.7
93833
75
150.9
93833
100
93833
120
147.5 143.4
93834
-50
137.5
93834
120
137.5
C LAS SNO
P IP EFR OM
P IPE UNTI L
11410
15
600
11420
15
600
11430
15
600
11440
15
600
11441
15
600
11450
15
600
11460
15
600
11470
15
600
11480
15
600
11490
15
600
11500
15
600
11501
15
600
13410
15
600
13420
15
600
13430
15
600
13450
15
600
13460
15
600
13831
15
600
13832
15
600
13833
15
600
13834
15
600
16410
15
150
18410
15
100
18420
15
100
31410
15
600
31411
15
250
31411
300
600
31420
15
600
31430
15
600
31440
15
600
31441
15
600
31450
15
600
31451
15
250
31451
300
600
31460
15
600
31470
15
600
31480
15
600
31490
15
600
31500
15
600
31501
15
600
33410
15
300
33420
15
300
33430
15
300
33450
15
300
33460
15
300
33831
15
600
33832
15
600
33833
15
600
33834
15
600
61410
15
600
61420
15
600
61430
15
600
61440
15
600
61441
15
600
61450
15
600
61460
15
600
61470
15
400
61480
15
400
61490
15
400
61500
15
400
61501
15
400
63410
15
200
63420
15
200
63430
15
200
63450
15
200
63460
15
200
63831
15
600
63832
15
600
63833
15
600
63834
15
600
91410
15
600
91420
15
600
91430
15
600
91440
15
600
91441
15
600
91450
15
600
91460
15
600
91470
15
400
91480
15
400
91490
15
400
91500
15
400
91501
15
400
91520
15
400
91521
15
400
93410
15
200
93420
15
200
93430
15
200
93450
15
200
93460
15
200
93831
15
600
93832
15
600
93833
15
400
93834
15
400
151410
15
600
151420
15
600
151430
15
600
151440
15
600
151441
15
600
151450
15
600
151460
15
600
151470
15
400
151480
15
400
151490
15
400
151500
15
400
151501
15
400
151520
15
400
151521
15
400
153410
15
100
153410
150
150
153410
200
200
153420
15
200
153430
15
100
153430
150
150
153430
200
200
153450
15
100
153450
150
150
153460
15
150
153831
15
400
153832
15
500
153833
15
250
153834
15
250
251410
15
300
251420
15
300
251430
15
300
251440
15
100
View more...
Comments