3. Propeller Geometry The principal geometric parameters of the design propellers and the propeller drawings are presented in tables and figures as follows: Propeller
Design (KP947)
Principal Geometry Parameters
Table 4
Sectional Geometry of the Design Propeller (unit: cm)
Table 5
Offset Data of Section Profiles of the Design Propeller
Table 6
Propeller Drawing
Fig. 3
Table 4 Principal Geometry of the Design Propellers Model Propeller Number
Design (KP947)
Scale Ratio, l
21.6
Full-Scale Propeller Diameter, Ds
5.4 m
Model Propeller Diameter, Dm Hub-Diameter Ratio, d H D Number of Blades, Z
250.0 mm 0.180 4
Mean Pitch-Diameter Ratio, (P D )mean
0.6456
Expanded Area Ratio, AE AO
0.5314
Chord-Diameter Ratio at 0.7R, C0.7 R D
0.3098
Skew Angle Extent, q S
22.64°
Rake-Diameter Ratio at Tip Blade Section Type
0° NACA66
Propeller Rotation Direction
R.H.
Material of Model Propeller
Aluminum
Maritime and Ocean Engineering Research Institute, KORDI
Table 5: Sectional Geometry of the Design Propeller (unit: cm)
r/R
Pitch
Rake
Skew (deg)
Chord
Camber
Thickness
0.180
321.07
0.0
-1.578
98.33
2.664
23.245
0.250
329.89
0.0
-2.830
108.87
3.180
20.284
0.300
335.76
0.0
-3.522
116.36
3.432
18.400
0.400
346.37
0.0
-4.397
130.20
3.612
15.120
0.500
354.45
0.0
-4.285
144.23
3.384
12.270
0.600
358.82
0.0
-2.781
157.33
3.081
9.800
0.700
358.45
0.0
0.329
167.31
2.843
7.520
0.800
353.59
0.0
4.746
164.98
2.475
5.477
0.900
344.11
0.0
10.457
138.62
1.663
3.549
0.950
337.80
0.0
13.911
109.38
0.993
2.595
0.975
334.27
0.0
15.883
83.47
0.561
2.124
1.000
330.35
0.0
18.238
0.01
0.000
1.657
Maritime and Ocean Engineering Research Institute, KORDI
Table 6: Offset Data of Section Profiles of the Design Propeller ORDER OF OFFSETS (unit: mm) (1) DISTANCE FROM LE (2) SUCTION SIDE (3) CAMBER LINE (4) PRESSURE SIDE. x/C(%)
Thank you for interesting in our services. We are a non-profit group that run this website to share documents. We need your help to maintenance this website.