Profis Ps1000 Eng

Hilti PROFIS PS 1000

2

Hilti PROFIS PS 1000

Content 4

1 General

1.1 Installation ................................................................................................................................... 4 1.2 Short ................................................................................................................................... Description 11 1.3 Overview ................................................................................................................................... 15 1.4 Menu ................................................................................................................................... Bar 16 1.5 Tab ................................................................................................................................... Bar 17

2 Settings

17

3 Project Management

18

3.1 Organize ................................................................................................................................... Scans in Projects 18 Project List ......................................................................................................................................................... 18 Scan List ......................................................................................................................................................... 22 Moving/Copying ......................................................................................................................................................... Scans 24

3.2 Selecting/Configuring ................................................................................................................................... a Connected Device 25 3.3 Transferring ................................................................................................................................... Projects or Scans 27 Using the ......................................................................................................................................................... Buttons 27 Using Drag&Drop ......................................................................................................................................................... 29 Using the ......................................................................................................................................................... Clipboard 30

3.4 Importing ................................................................................................................................... Projects/Scans 30 Using Drag&Drop ......................................................................................................................................................... 31 Using the ......................................................................................................................................................... Clipboard 31 Working w......................................................................................................................................................... ith Several Archives 32

33

4 Scan Analysis

4.1 Info ................................................................................................................................... Section 33 4.2 Function ................................................................................................................................... Buttons 34 4.3 Function ................................................................................................................................... button "Param." 35 Section "Depth ......................................................................................................................................................... Scaling" 36 Depth Calibration ......................................................................................................................................................... 40 Section "Param ......................................................................................................................................................... ." 41 Technical Explanations .................................................................................................................................................. for the Object Depth Determination 47 Section "Overlay" ......................................................................................................................................................... 50

4.4 Function ................................................................................................................................... Button "Display" 51 Section "Display" ......................................................................................................................................................... 51 Section "Crosshair ......................................................................................................................................................... / Cross Section" 51

4.5 Function ................................................................................................................................... Button "Config." 53 Section "Activate/Deactivate" ......................................................................................................................................................... 53 Section "Colors" ......................................................................................................................................................... 55

4.6 Function ................................................................................................................................... Button "Extras" 56 Section "Report" ......................................................................................................................................................... 56

Content

Contents

3

Section "Preview ......................................................................................................................................................... Im age" 57

4.7 Function ................................................................................................................................... Button "Drill-holes" 59 4.8 Function ................................................................................................................................... Button "Annotation" 60 4.9 Main ................................................................................................................................... Content 62 Manipulation ......................................................................................................................................................... of the Visualization and Shortcuts 62 Im agescan ......................................................................................................................................................... 2D 63 Selecting Cross .................................................................................................................................................. Section Images 63 Displaying.................................................................................................................................................. Unscanned Areas 64 Im agescan ......................................................................................................................................................... 3D 65 3D Stereoscopic .................................................................................................................................................. View 65 Selecting and .................................................................................................................................................. Modifying 3D Cross Section Images 66 Quickscan......................................................................................................................................................... Recording 66 2D Visualization .................................................................................................................................................. of a Quickscan Recording 66 3D Visualization .................................................................................................................................................. of a Quickscan Recording 70 Com m ent......................................................................................................................................................... Line 72

4.10 Instructions ................................................................................................................................... for Data Analysis 72 Starting the ......................................................................................................................................................... PC Softw are Hilti PROFIS PS 1000 72 Dow nloading ......................................................................................................................................................... a Scan Recording 73 Analysis and ......................................................................................................................................................... Visualization of Scan Data 75 Optional: Analysis ......................................................................................................................................................... of Raw Data 82 Generating ......................................................................................................................................................... a Report 83

5 Data Transfer

84

5.1 From ................................................................................................................................... PSA 100 Monitor to PC 84 5.2 From ................................................................................................................................... PSA 97 USB Data Module or PSA 95 Memory Card 85

Content

6 SW-Update

86

7 Troubleshooting

89

Hilti PROFIS PS 1000

1

General

1.1

Installation

General

The PC software Hilti PROFIS PS 1000 will be delivered on CD-ROM. To install the software proceed as follows: 1. Insert the CD in the CD drive. The AutoRun function will automatically start up the Installation program. Alternatively, you may also start the Hilti PROFIS PS 1000 Setup Wizard with a double click.

2. Select in the dialog box that will open the language to use during the Installation (the System will automatically propose the language used by the operating system).

3. Click “Next” to confirm the start of the Setup Wizard. At any time, it is possible to cancel the installation by clicking “Cancel” (also in the next steps).

4

Content

Hilti PROFIS PS 1000

General

4. Select the “Destination location” or confirm the folder proposed by the Installation program.

Content

5

Hilti PROFIS PS 1000

General

5. Select the “Start Menu Folder” or confirm the folder proposed by the Installation program.

6

Content

Hilti PROFIS PS 1000

General

6. If you like to create a desktop icon that gives you quick access to the PC software Hilti PROFIS PS 1000 click the checkbox “Create a desktop icon”. Here you can also indicate whether this Desktop icon and the demo scans are to be available to all users or only the current user.

Content

7

Hilti PROFIS PS 1000

General

7. Now, all necessary settings that can be checked before starting the installation are set. If you want to change any settings click “Back” to return to this Setup step and change the entry there. If all settings are correct, click “Install” to continue with the installation.

8

Content

Hilti PROFIS PS 1000

General

8. During Installation, you will be kept informed about the status of the installation process.

Content

9

Hilti PROFIS PS 1000

General

9. With the Installation completed successfully, the PC software Hilti PROFIS PS 1000 can be launched immediately by selecting the checkbox “Launch Hilti PROFIS PS 1000”. Click “Finish” to exit Setup.

10

Content

Hilti PROFIS PS 1000

1.2

General

Short Description

Hilti PROFIS PS 1000 lets you transfer and organize data on your PC analyze scans in detail generate reports. The software is structured to support the usual methods and proceedings at the best in order to ensure an efficient scanning operation. The main window opens after launching the program and confirmation of the disclaimer:

Content

11

Hilti PROFIS PS 1000

General

The Project Management section opens directly after the start-up of the program. In this section, data from different sources (PSA 100 Monitor, etc.) may be transferred to your computer, archive folders defined as well as scans and projects managed (see chapter 3, Project Management). In the next step, scans may be opened for further processing (e.g. by double clicking the scan). Thus, the Analysis section opens:

12

Content

Hilti PROFIS PS 1000

General

In the Analysis section, the scan is visualized, calculation and visualization settings may be adjusted as necessary and annotations for documentary purposes may be added (see chapter 4, Scan Analysis). In the last step, reports ready to print may be generated, e.g. by using the File menu report… (see chapter 4.6.1, Section “Report” ):

Content

Print

13

Hilti PROFIS PS 1000

14

General

Content

Hilti PROFIS PS 1000

1.3

Overview

1 - Menu Bar 2 - Tab Bar 3 - Info Section 4 - Function buttons 5 - Analysis Section 6 - Main Content 7 - Comment Line

Content

General

Contains the general functionalities of the program, see chapter 1.4, Menu Bar. Subdivides the two main parts “Project Management” and “Analysis”. The tab “Analysis” will appear once a scan has been opened, see chapter 1.5, Tab Bar. Contains the coordinates when scan data is displayed, see chapter 4.1, Info Section. Choose how the data is displayed (2D/3D) and switch between the different analysis sections, see chapter 4.2, Function buttons. Contains the range of available parameters in the respective analysis sections. Contains the most important data of a scan image, i.e. the displayed illustration shows the 2D view of an Imagescan. To add a comment, see chapter 4.9.5, Comment Line .

15

Hilti PROFIS PS 1000

1.4

General

Menu Bar

The Menu Bar shows the general functionalities of the program as well as some context sensitive functions: File Function Open Scan Save Scan Revert Changes Execute Script Print Report Exit Edit Function Cut Copy Paste Delete

Display Function Show large preview images 2D 3D Take Screenshot Options

"?"-Function Help Contents Information...

16

Description Opens a dialog box for opening a scan. Saves open scan including all settings. Cancels in one step all changes made to the open scan since the last saving. Executes script for automation of several processes. Generates a report ready to print. Exits Hilti PROFIS PS 1000.

Shortcut Ctrl+O Ctrl+S

Description Cuts an object (will be saved in the clipboard) to be pasted at a different location. Copies selected object in the clipboard. Pastes the object available in the clipboard at selected location. Deletes selected object after having prompted the user for confirmation.

Shortcut Ctrl+X

Description Changes the size of preview images of scans in the scan list from small to large and vice versa. Displays a 2D view of the scan. Displays a 3D view of the scan. Creates a screenshot of the current visualization of the scan and saves it in the clipboard. Opens a dialog box for selecting unit system and language, see chapter 2, Settings.

Shortcut

Description Opens the Operation Manual with Table of Contents. Provides the opportunity to check for and download updates of Hilti PROFIS PS 1000 and the two devices PSA 100 Monitor and X-Scan PS 1000. Contains additional information such as copyright, disclaimer).

Shortcut F1

Ctrl+E Ctrl+P Alt+F4

Ctrl+C Ctrl+V Del

Ctrl+2 Ctrl+3 Ctrl+T

Content

Hilti PROFIS PS 1000

1.5

General

Tab Bar

The Tab bar below the menu bar lets you switch between the Project Management and Analysis section.

Project Management In the Project Management section, data is imported, exported, documented, archived and selected for processing, visualization and interpretation tasks. A preview image will roughly show the graphic content of a selected scan. Thus, you can quickly recognize which dataset is shown. Additionally, information about the scan such as its location, the date or the specific project is displayed. Analysis In the Analysis section, data is visualized, processed, interpreted and documented.

2

Settings

To access the settings, select View Options in the Menu bar. Here you can select the language and units system to be used and make proxy server settings.

Any change of the language setting requires a restart of the program whereas the unit system

Content

17

Hilti PROFIS PS 1000

Settings

settings are immediately effective. Activate the proxy server if your computer does not have a direct connection to the Internet. An Internet connection is needed in order to access the Hilti PROFIS Update Server (see Section 6).

Please contact your Internet service provider for information about the proxy server settings.

3

Project Management

The Project Management window lets you: organize scans in projects process project info transfer scans and projects from the PSA 100 Monitor, PSA 95 Memory Card or PSA 97 USB Stick rename scans and edit scan commentary prepare a PSA 95 Memory Card to be used in X-Scan PS 1000 create archive directories open scans for processing

3.1

Organize Scans in Projects

3.1.1

Project List

In the upper part of the Project Management window (2), the project list of the current Archive (1) is displayed with additional information. The meaning of the last three columns is: number of Imagescans (# IS), number of Quickscans (# QS) and total number of scans (# Total). Click one of the column headings and the table will be sorted by this column; by clicking the column heading again, the sort sequence will be changed again. To access general project editing functions, open the pop-up menu by clicking with the right mouse button on the applicable project in the project list.

18

Content

Hilti PROFIS PS 1000

Project Management

The Project Info (3) of the selected project is displayed between the Project List (2) and the Scan List (4). The scan list contains all scans belonging to the selected project. You can change the space distribution between project list and scan list by moving the bar (5) to the top or the bottom. A single click on an item in the list will highlight the project name which may thus be edited:

A double click on an item in the list will take you to the window for editing the project info of an existing project:

Content

19

Hilti PROFIS PS 1000

Project Management

To create a new project, select "New" from the pop-up menu.

20

Content

Hilti PROFIS PS 1000

Project Management

Thus the Project Info window described above will open containing a default value for the project name and blanks for the remaining zones. Complete these zones and click the OK button in order to create the project. To delete a project (including all scans contained in it), first select this project from the project list and then press "Del" or select the function “Delete” in the Edit menu or the context menu. The project and the scans contained in it will only be deleted after you have been prompted for confirmation:

Content

21

Hilti PROFIS PS 1000

3.1.2

Project Management

Scan List

There are two possibilities to display scan lists. First, a list view of scans with additional information:

Or activate the setting “Show large preview images” in the View menu to set a second display mode of the scan list:

22

Content

Hilti PROFIS PS 1000

Project Management

In both cases, the scan name can be directly edited. To do so, you will need to click the scan name of a selected scan once:

If you move the mouse cursor over a preview image, short information about the scan will be displayed.

Content

23

Hilti PROFIS PS 1000

Project Management

In the scan list, select "Edit Comment..." from the pop-up menu (right mouse click) to add a comment to the scan and play the audio comment:

To open a scan for further analysis purposes, double-click an item in the scan list. 3.1.3

Moving/Copying Scans

To move a scan to another project, drag the scan in the scan list to the selected project by using the mouse. Keep the mouse button pressed as long as the cursor is placed over the project to which you want to move the scan:

If you keep the Ctrl button pressed during the described operation, the scan will be copied instead of being moved. In this case, a small “+”-symbol will appear in the mouse cursor:

24

Content

Hilti PROFIS PS 1000

Project Management

The clipboard is another option for copying or moving scans. Thus, a scan is temporarily stored in the clipboard to be pasted later in any other project. For the selected scan, use the “Copy” function button (“Cut” for moving the scan) either in the Edit menu or in the context menu (right mouse button) or by pressing the button combination Ctrl+C (Ctrl+X for moving):

Then select the destination project from the project list and use the “Paste” function button either in the edit menu or in the context menu (right mouse button) or by pressing the button combination Ctrl+V.

3.2

Selecting/Configuring a Connected Device

When a device (PSA 100 Monitor, PSA 97 USB flash drive) is connected to the computer's USB interface, an additional column will appear on the left side of the window. In this column, all projects (top) and scans (bottom) that are stored on the device will be displayed:

Content

25

Hilti PROFIS PS 1000

Project Management

If more than one device is simultaneously connected to the computer, the device to be displayed can be selected from the Drop-Down-Box top left:

To create projects on a PSA 97 Data Stick or a PSA 95 Memory Card, this device must necessarily present a special data structure. Select the function “Prepare/Setup new device” in the Drop-Down-Box to create a new data structure. Select the device to prepare in the dialog box that opens and click OK to confirm

26

Content

Hilti PROFIS PS 1000

3.3

Transferring Projects or Scans

3.3.1

Using the Buttons

Project Management

Using the buttons (1) and (2) in the middle of the screen, projects (1) and scans (2) can be transferred from the device to the archive folder and vice versa. The data saved on the device will be preserved.

Content

27

Hilti PROFIS PS 1000

Project Management

To transfer a project, including the scans contained in it, from the device to the archive folder, select a project from the project list of the device and click the “>” button between the project lists (copy single project). If a project having an identical name already exists in the archive folder, the scans of the project saved on the device will be copied to the correspondent project in the archive (scans that are already saved in the destination project will be preserved). If scans with an identical name already exist in the project in the archive you will be notified accordingly and given the choice of overwriting the scans or cancelling the operation. If all projects are to be transferred from the device to the archive folder, click the “>>” button between the project lists. Depending on the number of scans saved on the device, the copying operation will take some time. To transfer one or all projects from the archive folder back to the device, use the “” button between the scan lists. To transfer one or all scans of a project in the archive folder to another project saved on the device, use the “