Product Description: Jpx01 Mdf V200R001C01

JPX01 MDF V200R001C01

Product Description

Issue

02

Date

2012-01-30

HUAWEI TECHNOLOGIES CO., LTD.

Copyright © Huawei Technologies Co., Ltd. 2012. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Technologies Co., Ltd.

Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Technologies Co., Ltd.  All other trademarks and trade trade names mentioned in this document are the property of their respective holders.

Notice The purchased products, services and features are stipulated by the contract made between Huawei and the customer. All or part of the products, services and features described in this document may not be within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information, and recommendations in this document are provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied. The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Technologies Co., Ltd.  Address:

Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China

Website:

http://www.huawei.com

Email:

[email protected]

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

i

JPX01 MDF Product Description

1 Product Positioning

Contents 1 Product Positioning .......................................... ................................................................ ............................................ ............................................. ................................ ......... 1 2 Product Introduction ............................................ .................................................................. ............................................ ............................................. ............................ ..... 2 2.1 Frame ............................................................................................................................................................... 2 2.1.1 Double-sided Frame ....................................................... ............................................................... .......... 2 2.1.2 Single-sided Frame ................................................................................................................................. 4 2.2 Bracket ............................................................................................................................................................. 5 2.3 Terminal Block .............................................................. .............................................................. ..................... 6 2.4 Protective Unit ................................................................................................................................................. 8 2.5 Accessories ......................................................... ................................................................. ........................... 10 2.5.1 IDC Tool ............................................................................................................................................... 11 2.5.2 Testing Cord ......................................................... .............................................................. ................... 11 2.5.3 Disconnection Plug ............................................................................................................................... 12 2.5.4 Labels ........................................................ .............................................................. .............................. 13 2.5.5 Base ........................................................... ................................................................. ........................... 16

3 Application Scenarios .......................................... ................................................................ ............................................ ............................................. .......................... ... 18 4 Performance Indices ......................................... ............................................................... ............................................ ............................................. .............................. ....... 20 5 Standard Compliance .................................................. ........................................................................ ............................................ ......................................... ................... 24 6 Acronyms and Abbreviations ......................... ............................................... ............................................. ............................................. ............................. ....... 25 A Product Detail List ...................................................... ............................................................................ ............................................. ......................................... .................. 26 B Product Packing Detail List ................................ ...................................................... ............................................. .............................................. ......................... .. 28

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

ii

JPX01 MDF Product Description

1 Product Positioning

Figures Figure 1-1 JPX01 products series ............................................................ .............................................................. 1 Figure 2-1 JPX-F3D double-sided frame ........................................................... ................................................... 3 Figure 2-2 JPX-SF3D single-sided frame ............................................................................................................. 4 Figure 2-3 JPX01 bracket .............................................................. .............................................................. .......... 5 Figure 2-4 JPX01 Terminal block.................................................................................. ........................................ 7 Figure 2-5 Dimensions of the JPX01 terminal block .............................. .............................................................. 8 Figure 2-6 JPX01 protective unit .......................................................................................................................... 8 Figure 2-7 Grounding bar ................................................................................................................. ..................... 9 Figure 2-8 Application schematic drawing of grounding bar ................................................................................ 9 Figure 2-9 Dimensions of the JPX01 protective unit .............................. ............................................................ 10 Figure 2-10 Dimensions of the protective unit grounding bar .......................................................... ................... 10 Figure 2-11 JPX01-DXD IDC tool .......................................................... ............................................................ 11 Figure 2-12 JPX01-TC testing cord .................................................................................................................... 12 Figure 2-13 JPX01 disconnection plug ............................................................................................................... 12 Figure 2-14 JPX01 MDF label ............................................................................................................................ 13 Figure 2-15 JPX01-ML-10 module label holder ......................................................................................... ........ 13 Figure 2-16 Application schematic drawing of module label holder ........................................................... ........ 14 Figure 2-17 JPX01 number flag .......................................................................................................................... 14 Figure 2-18 Application schematic drawing of number flag ............................................................................... 14 Figure 2-19 JPX01-NL-10 hinged label holder ........................................................................................... ........ 15 Figure 2-20 Application schematic drawing of hinged label holder ............................................................ ........ 16 Figure 2-21 JPX01 MDF base ..................................................................................................................... ........ 16 Figure 3-1 Application used in the equipment room .......................................... ................................................. 18 Figure 3-2 Application used in the outdoor cabinet ................................................................ ............................. 19

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

iii

JPX01 MDF Product Description

1 Product Positioning

Tables Table 2-1 Specifications of JPX-F3D double-sided frame .................................................................................... 3 Table 2-2 Specifications of JPX-SF3D single s-sided frame ............................................................ ..................... 5 Table 2-3 Specifications of the JPX01 bracket ...................................................................................................... 6 Table 2-4 Specifications of the JPX01 terminal block .............................................................. ............................. 7 Table 2-5 Features of the JPX01 protective unit ............................................................ ........................................ 9 Table 2-6 Specifications of the JPX01 protective unit .............................................................. ........................... 10 Table 2-7 Specifications of the JPX01-TC testing cord ............................................................ ........................... 12 Table 2-8 Specifications of JPX01 MDF base ............................................................... ...................................... 17 Table 4-1 The performance indices of J PX01 products ....................................................................................... 20 Table 4-2 Electric capability indexes of JPX01-SPD1-G400T ......................................................... ................... 22 Table 4-3 Electric capability indexes of JPX01-SPD1-G230F ......................................................... ................... 23

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

iv

JPX01 MDF Product Description

1 Product Positioning

1

Product Positioning

MDF (Main Distribution Frame) is the connection device between subscriber and exchange device. For ensure the signal is integrated, MDF products efficiently distribute, protect and management the network cables (copper cables). JPX01 product is among the Huawei’s MDF product series. It implements the termination and connection of external cables and exchange cables, to create a cable termination environment for ADSL or VDSL service. JPX01 MDF supply the following accessorial equipment:  protective unit, testing cord and disconnection plug, has the function of over-voltage and over-current protection, testing and controlling the lines connectivity. JPX01 MDF includes abundant types: double-sided frame and single-sided frame, meeting the scenario requirement of the inside environment; installed in the outdoor cabinet, meeting the scenario requirement of the outside environment. As shown in Figure 1-1. Figure 1-1 JPX01 products series

Double-sided frame

Issue 02 (2012-01-30)

Single-sided frame

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

Outdoor cabinet

1

JPX01 MDF Product Description

2 Product Introduction

2

Product Introduction

JPX01 consists of frame, bracket, terminal block, protective unit and accessories (including IDC tool, testing cord, disconnection plug, labels and base).

2.1 Frame The frame supplies installation carrier for the bracket and terminal block. There are two models frame: double-sided frame and single-sided frame.

2.1.1 Double-sided Frame The cable side terminal blocks and exchange side terminal blocks are installed on the different sides of the double-sided frame. The cable side terminal block is vertically mounted on the front pillar and exchange side terminal block is horizontally mounted on the back beam. JPX01 double-sided frame has only one model available: JPX-F3D. The product naming rules: 

JPX: Mandatory product SN of MDF distribution product



F: Frame



3: The height is 2.2 m



D: The column quantity is 2

Appearance of JPX-F3D double-sided frame is shown in  Figure 2-1.

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

2

JPX01 MDF Product Description

2 Product Introduction

Figure 2-1 JPX-F3D double-sided frame

Features 

Constructed of metal frame structure, easy to install and has good capability.



Combined easily the left and right frames.



Supports full front-operation for convenient maintenance.



Enough space for layout of the cables, and the layout of the cables is orderly.

Specifications Specifications of the JPX-F3D double-sided frame are shown in Table 2-1. Table 2-1 Specifications of JPX-F3D double-sided frame

Model

JPX-F3D

Dimensions (mm)

External line

Exchange line

HXWXD

Cable tray height

Column Qty

Pair / column

Capacity (pair)

Row QTY

Pair / row

Capacity (pair)

2200 X 500 X 800

200

2

100 X 7

1400

6

100 X 2

1200

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

3

JPX01 MDF Product Description

2 Product Introduction

2.1.2 Single-sided Frame The cable side terminal blocks and exchange side terminal blocks are installed on the same side of the single-sided frame, mounted alternately from the left side. JPX01 single-sided frame has only one model available: JPX-SF3D. The product naming rules: 

JPX: Mandatory product SN of MDF distribution product



SF: Single frame



3: The height is 2.2 m



D: The column quantity is 2

Appearance of JPX-SF3D single-sided frame is shown in  Figure 2-2. Figure 2-2 JPX-SF3D single-sided frame

Features 

Constructed of metal frame structure, easy to install and has good capability.



Supports the installation near the wall for meeting the requirement of small equipment office.



Flexible installation modes meet the different scenarios requirement: combined easily the left and right frames, back-to-back installation, installed in the corner.



Supports full front-operation for convenient maintenance.

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

4

JPX01 MDF Product Description

2 Product Introduction 

The cable trough box on the bottom of the frame facilitates the layout of the cable. The layout of the cable is advisable and clear.



Enough space for layout of the cables, and the layout of the cables is orderly.

Specifications Specifications of the JPX-SF3D single-sided frame are shown in Table 2-2. Table 2-2 Specifications of JPX-SF3D single s-sided frame

Model

Dimensions (mm) HXWXD

External line

Cable tray height

JPX-SF3D 2200 X 500 X 600 200

Exchange line

Column Qty

Pair / column

Capacity (pair)

Column QTY

Pair / column

Capacity (pair)

1

100 X 7

700

1

70 X 10

700

2.2 Bracket The bracket is used for installing the terminal block and fixing it on the frame. JPX01 bracket has two models available: JPX01-BRK-11 and JPX01-BRK-8. The product naming rules: 

JPX01: Product model SN for Huawei's MDF distribution product



BRK: Bracket



11: 11 installation positions; 8: 8 installation positions

Appearance of the JPX01 bracket is shown in Figure 2-3. Figure 2-3 JPX01 bracket

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

5

JPX01 MDF Product Description

2 Product Introduction

Features  

The bracket for stainless steel is strong and durable. Each bracket has one grounding finger. To supply grounding protection, the grounding fingers belonged the same column are serial connection from beginning to end. The ground wire is led to the frame grounding bar from the ground terminal of the downmost  bracket.



JPX01-BRK-11 has 11 installation positions for blocks: the first one is used for installing the module label holder, the others is used for installing the terminal blocks.



JPX01-BRK-8 has 8 installation positions for blocks: the first one is used for installing the module label holder, the others is used for installing the terminal blocks.

Specifications Specifications of the JPX01 bracket are shown in Table 2-3. Table 2-3 Specifications of the JPX01 bracket

Model

Dimensions H X W X D (mm)

Suitable for Frame

Suitable for Terminal Block

JPX01-BRK-11

248 X 104 X 50

JPX-F3D

Cable side terminal block Exchange side terminal block

JPX01-BRK-8

150 X 104 X 50

JPX-SF3D

Cable side terminal block

JPX-SF3D

Exchange side terminal block

2.3 Terminal Block Terminal blocks are the core parts for MDF. They create a cable termination environment for external cable, exchange cable and jumper. JPX01 terminal block has two models available: JPX01-BLK1-10K and JPX01-BLK1-10B. The product naming rules: 

JPX01: Product model SN for Huawei's MDF distribution product



BLK: Block



1: Product model SN for terminal block product



10: The capability is 10-pair



K: The IDC contact is switching contact; B: the IDC contact is disconnection contact

Appearance of the JPX01 terminal block is shown in Figure 2-4.

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

6

JPX01 MDF Product Description

2 Product Introduction

Figure 2-4 JPX01 Terminal block

JPX01-BLK1-10K switching contact block

JPX01-BLK1-10B disconnection contact block

Features 

Capacity: 10-pair/block.



Flexible IDC technology: 45  insulation displacement connection.



Transmission performance meets the Category 5 standards.



Compatible with the IDC tool for Krone type.

o



Full-front operation. Before you insert wire in maintenance, you should remove the  protective units of the adjacent ports.



JPX01-BLK1-10K is switching contact. It is usually used for the cable side terminal  block. JPX01-BLK1-10B is disconnection contact. It is usually used for the exchange side terminal block.

Specifications Specifications of the JPX01 terminal block are shown in Table 2-4. Table 2-4 Specifications of the JPX01 terminal block

Model

Dimensions L X H X D (mm)

JPX01-BLK1-10K

126.6 X 23.4 X 40.9

JPX01-BLK1-10B

Dimensions of the JPX01 terminal block are shown in Figure 2-5.

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

7

JPX01 MDF Product Description

2 Product Introduction

Figure 2-5 Dimensions of the JPX01 terminal block

2.4 Protective Unit Protective unit is mainly used together with the cable side terminal block. It has over-voltage and over-current protection capacity to protect the backward switching device. JPX01  protective unit have two models available: JPX01-SPD1-G400T and JPX01-SPD1-G230F. The product naming rules: 

JPX01: Product model SN for Huawei's MDF distribution product



SPD: Surge protective device



1: Product model SN for protective unit product



G: Gas discharge tube



400: DC breakdown voltage is 400V; 230: DC breakdown voltage is 230V



T: Three point protection; F: Five point protection

Appearance of the JPX01 protective unit is shown in Figure 2-6. Figure 2-6 JPX01 protective unit

Features Features of the JPX01 protective unit is shown in Table 2-5.

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

8

JPX01 MDF Product Description

2 Product Introduction

Table 2-5 Features of the JPX01 protective unit

Model

Over-voltage Protection

Over-current Protection

Protection Range

Transmission Performance

JPX01-SPD1G400T

Over-voltage component is the gas discharge tube:

Without the over-current  protection device

Surge protection;

Supply VDSL2 service

JPX01-SPD1G230F

Strong ability for enduring current



Many times for surge current impulsion



Over-current component is high-speed and macromolecule PTCR (Positive Temperature Coefficient Resistor).

Electrical power cable induction  protection;

Supply ADSL service

Electrical power cable connection  protection.

Matching with the grounding bar: each 10 pcs protective units matched with 1 pcs grounding  bar. As shown in Figure 2-7 and Figure 2-8 . Figure 2-7 Grounding bar

Figure 2-8 Application schematic drawing of grounding bar

1. Cable side terminal block

2. Grounding bar

3. Protective unit

Specifications Specifications of the JPX01 protective unit are shown in Table 2-6.

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

9

JPX01 MDF Product Description

2 Product Introduction

Table 2-6 Specifications of the JPX01 protective unit

Model

Dimensions L X H X D (mm)

JPX01-SPD1-G400T

9.4 X 13.2 X 52

JPX01-SPD1-G230F Grounding bar

109 X 11.7 X 23.7

Dimensions of the JPX01 protective unit are shown in Figure 2-9. Figure 2-9 Dimensions of the JPX01 protective unit

Dimensions of the protective unit grounding bar are shown in  Figure 2-10. Figure 2-10 Dimensions of the protective unit grounding bar

2.5 Accessories JPX01 accessories cover IDC tool, testing cord, disconnection plug, labels and base.

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

10

JPX01 MDF Product Description

2 Product Introduction

2.5.1 IDC Tool IDC tool is used to clamp the cable into the spring plate or pull out the cable from the spring  plate, to implement cable connection or disconnection. JPX01 IDC tool only has one model available: JPX01-DXD. The product naming rules: 

JPX01: Product model SN for Huawei's MDF distribution product



DXD: Code name for Huawei's IDC tool product

Appearance of the JPX01-DXD is shown in Figure 2-11. Figure 2-11 JPX01-DXD IDC tool

Features 

After the wire is terminated, the redundant wires are automatically cut off.



Wire pulling-out hook and wire pressing-in fork equipped on the IDC tool can easily pull out and press in the wire.

2.5.2 Testing Cord The testing cord is used to lead the signal to test equipment, and test whether the signal  between ports is connected. JPX01 testing cord only has one model available: JPX01-TC. The product naming rules: 

JPX01: Product model SN for Huawei's MDF distribution product



TC: Testing cord

Appearance of the JPX01-TC testing cord is shown in Figure 2-12.

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

11

JPX01 MDF Product Description

2 Product Introduction

Figure 2-12 JPX01-TC testing cord

Features 

Remove the protective unit before you used the testing cord.



Front-inserted.



A pair of red clips is connected to the internal line tester or telephone set; A pair of black clips is connected to the external line tester (e.g. ohmmeter).

Specifications Specifications of the JPX01 testing cord are shown in  Table 2-7. Table 2-7 Specifications of the JPX01-TC testing cord

Model

Dimensions

JPX01-TC

Testing plug L X H X D (mm)

9.2 X 14.2 X 60.6

Length for wire (m)

5

2.5.3 Disconnection Plug The disconnection plug is used to disconnect the voice loop. Appearance of the JPX01 disconnection plug is shown in Figure 2-13. Figure 2-13 JPX01 disconnection plug

Features 

Each 100-pair disconnection contact blocks (JPX01-BLK1-10B) match 5 pcs disconnection plug automatically.



Front-inserted.

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

12

JPX01 MDF Product Description

2 Product Introduction 

One JPX01 disconnection plug disconnects one voice loop.

2.5.4 Labels The labels are use for identifying the information such as line order of block. The JPX01 labels include MDF label, module label holder, number flag and hinged label holder.

MDF Label The MDF label is used to identify the column of the cable side terminal block. Appearance of the JPX01 MDF label is shown in Figure 2-14. Figure 2-14 JPX01 MDF label

The features of JPX01 MDF label is following: 

Each frame matches 1 pcs MDF label automatically.



It is white words on blue background and self-adhesive.



It can be directly stuck to the corresponding groove of the identification board on top of the distribution frame.

Module Label Holder The module label holder is used to identify the block information of the total bracket. JPX01 module label holder has only one model available: JPX01-ML-10. The product naming rules: 

JPX01: Product model SN for Huawei's MDF distribution product



ML: Module label



10: Used for 10-pair terminal block

Appearance of the JPX01 module label holder is shown in  Figure 2-15. Figure 2-15 JPX01-ML-10 module label holder

The features of JPX01-ML-10 module label holder are following: 

Issue 02 (2012-01-30)

Each bracket matches 1 pcs module label holder.

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

13

JPX01 MDF Product Description

2 Product Introduction 

JPX01-ML-10 is installed in the first installation position to identify the block information of the total bracket.

The application of JPX01-ML-10 is shown in Figure 2-16. Figure 2-16 Application schematic drawing of module label holder

Number Flag The number flag is used to identify the series number of each terminal block. Appearance of the JPX01 number flag is shown in Figure 2-17. Figure 2-17 JPX01 number flag

The features of JPX01 number flag are following: 

Each 100-pair terminal blocks match 1 pcs number flag automatically.



JPX01 number flag is installed in the one side of terminal block to identify the series number.

The application of JPX01 number flag is shown in Figure 2-18. Figure 2-18 Application schematic drawing of number flag

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

14

JPX01 MDF Product Description

2 Product Introduction

Hinged Label Holder The hinged label holder is used to identify each block information. JPX01 hinged label holder has only one model available: JPX01-NL-10. The product naming rules:   

JPX01: Product model SN for Huawei's MDF distribution product  NL: Number label 10: Used for 10-pair terminal block

Appearance of the JPX01 hinged label holder is shown in  Figure 2-19. Figure 2-19 JPX01-NL-10 hinged label holder

The number flag and the hinged label holder are both used to identify the series number of each terminal  block. But they are suitable for different condition. 

The number flag could be used whether the block installed the protective unit.



The hinged label holder is only used for the block without protective unit.



They will not be used at one time.

The features of JPX01-NL-10 hinged label holder is following: 

Each terminal block matches 1 pcs hinged label holder.



JPX01-NL-10 is installed in front of the terminal block to identify the terminal block information.

The application of JPX01-NL-10 hinged label holder is shown in  Figure 2-20.

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

15

JPX01 MDF Product Description

2 Product Introduction

Figure 2-20 Application schematic drawing of hinged label holder

2.5.5 Base The base is optional parts. It is the support parts of ground-mount MDF. According the different subscriber requirement, we could change the height of MDF through adjusting the  base height. JPX01 MDF base and JPX202 base is common. They have four models available: JPX202-FD-DZA, JPX202-FD-DZB, JPX202-SFD-DZA, JPX202-SFD-DZB. The product naming rules: 

JPX202: Product model SN for Huawei's MDF distribution product



FD: 2-column frame; SFD: 2-column single frame



DZ: Code name for Huawei's base product



A, B: Product model SN for base product

Appearance of the JPX01 MDF base is shown in  Figure 2-21. Figure 2-21 JPX01 MDF base

Features 

The steel frame body is high intensity and anticorrosion.



Installation and operation is simple and easy.



The height is adjustable for convenient use.

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

16

JPX01 MDF Product Description

2 Product Introduction

Specifications Specifications of the JPX01 MDF base are shown in  Table 2-8. Table 2-8 Specifications of JPX01 MDF base

Model

JPX202-FD-DZA

Dimensions H X W X D(mm)

Suitable for Frame

Pitch

Adjusting range for H

WXD

10

180-320 (Without gasket)

500 X 790

JPX-F3D double-sided frame

500 X 590

JPX-SF3D single-sided frame

185-325 (With gasket) JPX202-FD-DZB

10

330-610 (Without gasket) 335-615 (With gasket)

JPX202-SFD-DZA

10

180-320 (Without gasket) 185-325 (With gasket)

JPX202-SFD-DZB

10

330-610 (Without gasket) 335-615 (With gasket)

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

17

JPX01 MDF Product Description

3 Application Scenarios

3

Application Scenarios

JPX01 provides cable termination environment for the connection between the external cables and switching equipment. It cooperates with Huawei’s MA5600T to provide xDSL service. JPX01 can be used both in the equipment room (including the central office, remote office and residential equipment room), and in the outdoor cabinet. It can be deployed in the new or expansion project. The application of JPX01 products is shown in Figure 3-1 and Figure 3-2. Figure 3-1 Application used in the equipment room

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

18

JPX01 MDF Product Description

3 Application Scenarios

Figure 3-2 Application used in the outdoor cabinet

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

19

JPX01 MDF Product Description

4 Performance Indices

4

Performance Indices

The performance indices of JPX01 products are shown in Table 4-1. Table 4-1 The performance indices of JPX01 products

Performance Indices

Standard Compliance

Parameter Value

Operating Condition

Application class

Class 3.3

ETS 300019-1-3

Operating temperature

-25℃ to +65℃

--

Storage temperature

-40℃ to +70℃

--

Relative humidity

8％ to 100％

--

Atmospheric  pressure

70-106 kPa

--

Flammability

Class V-0

UL94

Environment  protection

Meet RoHS requirement

--

Plastic parts

PC-FR

UL94 V-0

Protective unit

Grounding bar

Cu H62-Y2

--

Over-voltage component

GDT

ITU/T Rec. K.12

Over-current component

PTCR

ITU/T Rec. K.30

Material

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

20

JPX01 MDF Product Description

4 Performance Indices

Performance Indices

Parameter Value

Standard Compliance

Block

ID termination material

Tin-phosphor bronze QSn6.5

--

Surface finishes

Nickel-plate, local Gild (Au)

--

Block

RAL9010 (ID bracket)

--

Color

RAL7035 (Pedestal) Protective unit

RAL 7035

--

Testing cord

RAL 7035

--

Solid wire diameter range

0.4-0.65 mm (Insulation diameter ≤ 1.4 mm)

--

 Number of wire terminations

≥ 100

IEC 11801

 Number of  plugging

≥ 750

IEC 11801

Transverse extraction force

≥ 50 N @ 0.5 mm

--

Longitudinal extraction force

≥ 10 N @ 0.5 mm

--

Endurance

Repeated insertion/withdrawals:

YD/T 694-2004

Mechanical Capability

Block

200 cycles from fully inserted to intermediate  position. Maximum change in protector/block contact resistance is less than 3 mΩ. Environmental Adaptability

Temperature variation

100 cycles × 1 h @ -40 ℃ / +70℃

IEC 11801

High temperature environment

500 h @ +70℃

IEC 11801

Temperature / humidity cycles

21 cycles × 24 h @ +25℃ / +65℃ / -10℃ / 93% RH

IEC 11801

Vibration

20 cycles × 105 min/axis @ 1.0 mm, 10-55 Hz

IEC 11801

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

21

JPX01 MDF Product Description

Performance Indices

4 Performance Indices

Standard Compliance

Parameter Value

Electric Capability

Block

Protective unit

Resistance of disconnection contact

≤ 7 mΩ 

YD/T694-2004

IDC contact resistance

≤ 3 mΩ 

YD/T694-2004

Insulation resistance

≥ 1000 MΩ @ 500 V ± 50 V DC

YD/T694-2004

Dielectric strength

Without breakdown or arc@ 45-60 Hz, AC 1000V, 1min

IEC 60189-3

Electric capabilities for the two models protective unit are very different. The detailed indexes are shown in Table 4-2 and Table 4-3.

--

Transmission Capability

Transmission  performance

Class D

IEC 11801

Table 4-2 Electric capability indexes of JPX01-SPD1-G400T

Electric Capability

Parameter Value

Standard Compliance

DC breakdown voltage

350-500 V @ 100 V/s

ITU/T Rec. K.12

Insulation resistance

≥ 1000 MΩ @ 100 V DC

YD/T 694-2004

Capacity (line to earth)

≤ 20 pF @ 1 MHz, 0.5 V

--

Impulse breakdown voltage

≤ 800 V @ 100V/µs

ITU/T Rec. K.12

≤ 950 V @ 1 kV/µs AC surge

600 V AC, 1s, 5 times @ 1 min intervals, 50 Hz

ITU/T Rec. K.20

AC discharge

10 times @ 5 A applications each line side, 3 min intervals, 50 Hz

ITU/T Rec. K.12

Impulse discharge current

300 times (alternating polarity) @ 100 A, 10/1000 µs

YD/T 694-2004

5 times of each polarity @ 2 kA (total current through center electrode), 8/20 µs Failure action time

Issue 02 (2012-01-30)

≤ 15s @ 2A (1 A × 2), 600 VAC, 50 Hz

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

--

22

JPX01 MDF Product Description

4 Performance Indices

Table 4-3 Electric capability indexes of JPX01-SPD1-G230F

Electric Capability

Parameter Value

Standard Compliance

DC breakdown voltage

200 - 300 V @ 100 V/s

ITU/T Rec. K.12

Insulation resistance

≥ 1000 MΩ @ 100 V DC

YD/T 694-2004

Capacity (line to earth)

≤ 20 pF @ 1 MHz, 0.5 V

--

Impulse breakdown voltage

≤ 600 V @ 100 V/µs

ITU/T Rec. K.12

≤ 700 V @ 1 kV/µs PTCR room-temperature resistance

≤ 22 Ω

YD/T 694-2004

Hold current

120 mA @ +40℃, 1 h

YD/T 694-2004

Over-current operating characteristic

≤ 40s @ 0.35-0.1 A, 25℃

YD/T 694-2004

≤ 15s @ 0.5-0.1 A, 25℃ < 2s @ 1-0.1 A, 25℃ ≤ 0.3s @ 3-0.1 A, 25℃

AC surge

600 VAC, 1s, 5 times @ 1 min intervals, 50 Hz

ITU/T Rec. K.20

AC discharge

10 times @ 5 A applications each line side, 3 min intervals, 50 Hz

ITU/T Rec. K.12

Impulse discharge current

300 times (alternating polarity) @ 100 A, 10/1000 µs

YD/T 694-2004

5 times of each polarity @ 2 kA (total current through center electrode), 8/20 µs Failure action time

Issue 02 (2012-01-30)

≤ 15s @ 2A (1 A × 2), 600 V AC, 50 Hz

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

--

23

JPX01 MDF Product Description

5 Standard Compliance

5

Standard Compliance

International Standard ETS 300019-1-3

Environmental conditions and environmental tests for telecommunications equipment - Part 1-3: Classification of environmental conditions; stationary use at weatherprotected locations

UL94 V-0

Test for Flammability of Plastic Materials for Parts in Devices and Appliances

IEC 11801

Information technology - Generic cabling for customer premises

ITU-T K.11

Principles of protection against overvoltages and overcurrents

ITU-T K.12

Characteristics of gas discharge tubes for the protection of telecommunications installations

ITU-T K.20

Resistibility of telecommunication equipment installed in a telecommunications centre to overvoltages and overcurrents

ITU/T Rec. K.30

Positive temperature coefficient (PTC) thermistors

ITU/T K.44

Resistibility tests for telecommunication equipment exposed to overvoltages and overcurrents - Basic Recommendation

ITU/T K.45

Resistibility of access network equipment to overvoltages and overcurrents

IEC 60189-3

Low-frequency cables and wires with P.V.C. insulation and P.V.C. sheath. Part 3: Equipment wires with solid or stranded conductor, PVC insulated, in singles, pairs and triples

IEC 60068

Environmental Testing

National Standard YD/T 694-2004

“Main Distribution Frame” and “Rules for Enforcement on Quality Authentication and Inspection of MDF Homologation”

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

24

JPX01 MDF Product Description

6 Acronyms and Abbreviations

6

Acronyms and Abbreviations

Abbreviation in English

Full name in English

AC

Alternating Current

ADSL

Asymmetric Digital Subscriber Line

DC

Direct Current

GDT

Gas Discharge Tube

IDC

Insulation Displacement Connection

MDF

Main Distribution Frame

PC

Polycarbonate

PTCR

Positive Temperature Coefficient Resistor

VDSL

Very High Speed Digital Subscriber Line

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

25

JPX01 MDF Product Description

A Product Detail List

A

Product Detail List

Name

Model

Remark

Double-sided frame

JPX-F3D

External line capacity: 1400; Exchange line capacity: 1200

Single-sided frame

JPX-SF3D

External line capacity: 700; Exchange line capacity: 700

Bracket

JPX01-BRK-11

11 installation position: one is used for the module label holder, ten are used for the terminal blocks Used for installing the exchange side and cable side terminal  block on the JPX-F3D, or installing the cable side terminal block on the JPX-SF3D

JPX01-BRK-8

8 installation position: one is used for the module label holder, seven are used for the terminal blocks Used for installing the exchange side terminal block on the JPXSF3D

Terminal block

JPX01-BLK1-10K

10-pair/block Usually used for the cable side terminal block

JPX01-BLK1-10B

10-pair/block Usually used for the exchange side terminal block

JPX01-SPD1-G400T

Gas discharge tube; Supply over-voltage protection; Supply VDSL2 service

JPX01-SPD1-G230F

Gas discharge tube; Supply over-voltage and over-current  protection; Supply ADSL service

IDC tool

JPX01-DXD

-

Testing cord

JPX01-TC

-

Disconnection  plug

-

Each 100-pair disconnection contact blocks (JPX01-BLK1-10B) match 5 pcs disconnection plug automatically

MDF label

-

Each frame matches 1 pcs MDF label automatically

Protective unit

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

26

JPX01 MDF Product Description

A Product Detail List

Name

Model

Remark

Module label holder

JPX01-ML-10

Each bracket matches 1 pcs module label holder

 Number flag

-

Each 100-pair terminal blocks match 1 pcs number flag automatically

Hinged label holder

JPX01-NL-10

Each terminal block matches 1 pcs hinged label holder

MDF Base

JPX202-FD-DZA

H adjustable range: 180-325 mm

JPX202-FD-DZB

H adjustable range: 330-615mm

JPX202-SFD-DZA

H adjustable range: 180-325 mm

JPX202-SFD-DZB

H adjustable range: 330-615 mm

Issue 02 (2012-01-30)

Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd

Suitable for JPX-F3D frame

Suitable for JPX-SF3D frame

27