Procedure for File Transfer ToCMRI Delete the Old SW

PROCEDURE FOR FILE TRANSFER FROM PC TO SANDS CMRI

Preparing SANDS CMRI 1. Copy the file from the CD or Floppy to the Desktop of the Computer File are PCTERM..EXE and Win MAS 1.1 2. Connect the RS232 Communication cable to the PC. 3. connect the CMRI to the RS232 cable.

AT PC Step-1:

Run “PCTERM” software in Computer and press “enter” key.

AT CMRI Step-1: Step-2: Step-3: Step-4:

Press twice “ON/OFF” switch in CMRI with a fraction of time gap. After booting CMRI will display B:\ Type “TPTP” in CMRI, e.g. B:\TPTP Press Enter button in CMRI. Twice (two time)

AT PC Step-1: Step-2: Step-3: Step-4:

Now, B:> Format the CMRI before loading the software. B:>MC and press “Enter” Key. press “Y” for YES “N” for NO

Step-5:

check and Set the DATE & TIME. In CMRI E.g B:> DATE

Step -6:

E.g B:> TIME B:> TPTP and Press “Enter” key. “To control is handover to DMRI”

Step-7:

Close the “Pcterm” (press Alt + X) and press “Y” key

Now, CMRI is Ready for the Software Loading .

Procedure for File Transfer from PC to CMRI through Winmas PDF created with pdfFactory trial version www.avalanche.com.au

AT PC Step-1: Step-2: Step-3: Step-4: Step-5: transfer.

Run “WINMAS” software in Computer. Select “Port” “Open Port”( like PORT-1, PORT-2 etc.) small dialup box will display and click “OK” Select “EXPORT” and go to path in computer and select user file for

This screen will appear

Now select to COM port an click on OPEN PORT

Press on O.k button and export file to click export option PDF created with pdfFactory trial version www.avalanche.com.au

Display will appear like this

Now select CMRI End Destination path like I want transfer file in B:\

AT CMRI

PDF created with pdfFactory trial version www.avalanche.com.au

Step-1: Step-2: Step-3: Step-4:

Press twice “ON/OFF” switch in CMRI with a fraction of time gap. After booting CMRI will display B:\ Type “ws” in CMRI, e.g. B:\ws Press Enter button in CMRI

Now Press on O.K button and screen will show transfer like this

When transfer will complete this message will come on screen That means export is competed so finish with O.K

PDF created with pdfFactory trial version www.avalanche.com.au

And now, Close the Winmas .If any Zip file in Export it should be unzip .

AT PC Step-1:

Run “PCTERM” software in Computer and press “enter” key.

AT CMRI Step-1: Step-2: Step-3: Step-4:

Press twice “ON/OFF” switch in CMRI with a fraction of time gap. After booting CMRI will display B:\ Type “TPTP” in CMRI, e.g. B:\TPTP Press Enter button in CMRI. Twice (two time)

AT PC Step-1: Step-2: Step-3: Step-4: Step-5: Step -6:

Now, B:> Format the CMRI before loading the software. B:> Pkunzip – d seclt.zip and press “Enter” Key. file will be Extract in it . Del the Zip file B:> del seclt.zip and press “enter” key. B:> TPTP and Press “Enter” key. “To control is handover to DMRI”

Step-7:

Close the “Pcterm” (press Alt + X) and press “Y” key

Now, CMRI is Ready for the Use. PDF created with pdfFactory trial version www.avalanche.com.au

PDF created with pdfFactory trial version www.avalanche.com.au