Pressure Vessel Sample Calculations

Sample Vessel 8 PVE-Sample 8 Pressure Vessel Calculations April 27, 2007

XYZ Vessel Inc. 123 Anytown Ontario, Canada H0H 0H0

Charles Liu P. Eng Laurence Brundrett P. Eng. Pressure Vessel Engineering Ltd. PVE-Sample 8 Rev 0 1 of 25

Table of Contents Contents Cover Table of Contents Summary Material Properties Shell Heads Nozzle A Nozzle A - For App. 1-7 Nozzle A - App 1-7 Flange A Nozzle B Flange B Nozzle C & D Nozzle E Flange C, D & E Flange 42" Weight and Volume Lifting Lug Seismic - Vessel on Beams

27-Apr-07

Page 2 of 25 Page 1 2 3 4 5 6 7-8 9 - 10 11 12 13 - 14 15 16 17 18 19 20 21 22 - 25

Pressure Vessel Design Summary

27-Apr-07 XYZ Vessel Inc. Sample Vessel 8 PVE-Sample 8 PVE-Sample 8 PVE-Sample 8 Rev 0

42 72 66 Kerosene 9000 12300 12300 Maximum Internal pressure, psi

Maximum External Pressure, psi At Temperature, ºF

7.5 Minimum Temperature, ºF

650 Test Pressure, psi

455

Customer Vessel Part Number Drawing Job

Outside Diameter [inch] straight Shell (not including straight flange on heads) Volume [cuft] Fluid (value from Material Properties) Weight Empty [lbs.] Weight Full Weight Under Test

350 Maximum Temperature, ºF

Page 3 of 25

-20

650 At Pressure, psi

350

At a Minimum Temperature of: ºF For a Minimum Duration of:

55°F

1/2 hr

Maximum Allowed Working Pressure Maximum Design Metal Temperature Hydrostatic Test

SA-240 304 16,200 0.0625 No No No 0

Primary Material of Construction Allowable Stress Minimum allowed thickness per UG-16(b) Material Normalized Material Impact Tested (not required per UHA-51(d)) Radiography required Corrosion Allowance

ASME VIII-1 2004 none IID none

Code Edition Addenda Materials

UG-22 Loadings Considered Yes (a) Internal pressure Yes (a) External pressure Yes (b) Vessel weight full, empty and at hydro test Yes (c) Weight of attached equipment and piping (d)(1) Attachment of internals Yes (d)(2) Attachment of vessel supports (d) Cyclic or dynamic reactions (f) Wind (f) Snow Yes (f) Seismic (g) Fluid impact shock reactions (h) Temperature gradients (h) Differential thermal expansion (i) Abnormal pressures like deflagration

Code Cases Required

1

Material Properties

2

ASME VIII, IID 2004 Edition no Addenda

5

7 8 9 10 11 12 13 14 15 16 17

Design Pressure 350.0 7.5 Kerosene 11.25 0.800 Design Pressure =

20 21 22

Hydro Test

(UG-99(b)) Test Press = P * 1.3 * MR

pressure measured at top of vessel, rounded up

= 350 * 1.3 * 1

mTp = 455

Material Properties

(ASME IID) 650