Pressure Vessel Design-Excel-sheet-basic-designing-non-critical-P.xls

Basic Data Input Inner Diameter of Shell Inner Radius Length of Shell Thickness of Shell Thickness of Top / Left End 1 Thickness of Bottom / Right End 2 Mean Diameter of Shell Type of Top / Left End 1 Type of Bottom / Right End 2 Specific Gravity of material Pressure Pressure Stress value Joint Efficiency Corrosion allowance

1,100 550 3,120 12.0 12.0 12.0 1,112 E E 7.85 85 5.98 20,000 0.85 0.0

Determine Thickness of Vessel Required thickness of Shell 2.76 Required thickness of End (E) 2.75 Required thickness of End (T) 6% 0.00 Required thickness of End (T) 10% 0.00 Required thickness of End (H) 0.00 Required thk of End (C) Longit'l 0.00 Required thk of End (C) Circumf'l 0.00 Co-efficient M reqd. for End (T) 10% 0.00

Properties of Top / Left End 1 mm mm mm mm mm mm mm

psi kg/cm² psi mm

mm mm mm mm mm mm mm

Maximum Pressure allowable in Vessel Pressure 366 psi Hydrotest Pressure 476 psi Pressure 25.74 kg/cm² Hydrotest Pressure 33.46 kg/cm² Pressure 2.52 MPa Hydrotest Pressure 3.28 MPa NOTE: kg/cm², bar, atmosphere are almost same Volume when Vessel Size is given Volume of Shell 2.965 Volume of Top / Left End 1 0.222 Volume of Bottom / Right End 2 0.222 Volume of vessel 3.409

m³ m³ m³ m³

Weight of Vessel Area of Shell 11.02 Area of Top / Left Cone End 1 1.46 Area of Bottom / Right Cone End 2 1.46 Total Surface Area of Vessel 13.94 Weight of Shell 1,026.87 Weight of Top / Left end 1 137.45 Weight of Bottom / Right end 2 137.45 Total Weight 1,301.77

m² m² m² m² kgs kgs kgs kgs

Properties of Bottom / Right End 2

Hemispherical (H) Volume 0.000 Surface area 0.000 Weight of end 0.00

m³ m² kgs

Volume Surface area Weight of end

F & D / Torispherical (T) Crown radius 0 Knuckle radius (default) 0 Knuckle radius (actual) 170 SF (default) 0 SF (actual) 50 Ht. of end (incl. SF) 0 Volume 0.000 Surface area 0.000 Blank size 0 Weight of end 0.00

mm mm mm mm mm mm m³ m² dia kgs

F & D / Torispherical (T) Crown radius 0 Knuckle radius (default) 0 Knuckle radius (actual) 170 SF (default) 0 SF (actual) 50 Ht. of end (incl. SF) 0 Volume 0.000 Surface area 0.000 Blank size 0 Weight of end 0.00

mm mm mm mm mm mm m³ m² dia kgs

2:1 Ellipsoidal (E) Crown radius 990 Knuckle radius (default) 187 Ht. of end 275 SF 50 Ht. of end (incl. SF) 325 Volume of SF 0.048 Volume Total 0.222 Surface area 1.459 Blank size 1363 Weight of end 137.45

mm mm mm mm mm m³ m³ m² dia kgs

2:1 Ellipsoidal (E) Crown radius 990 Knuckle radius (default) 187 Ht. of end 275 SF 50 Ht. of end (incl. SF) 325 Volume of SF 0.048 Volume Total 0.222 Surface area 1.459 Blank size 1363 Weight of end 137.45

mm mm mm mm mm m³ m³ m² dia kgs

Truncated Cone (TC) Small diameter 200 Ht. of cone 800 Volume 0.000 Big diameter (outer) 0 Small diameter (outer) 0 Surface area 0.000 Weight of end 0.00

mm mm m³ mm mm m² kgs

Truncated Cone (TC) Small diameter 150 Ht. of cone 800 Volume 0.000 Big diameter (outer) 0 Small diameter (outer) 0 Surface area 0.000 Weight of end 0.00

mm mm m³ mm mm m² kgs

Full Cone (C) Ht. of cone 800 Volume 0.000 Big diameter (outer) 0 Apex angle (degrees) 0.000 Apex angle (radians) 0.000 Surface area 0.000 Weight of end 0.00

m² kgs

Full Cone (C) Ht. of cone 800 Volume 0.000 Big diameter (outer) 0 Apex angle (degrees) 0.000 Apex angle (radians) 0.000 Surface area 0.000 Weight of end 0.00

m³ m² kgs

Volume Surface area Weight of end

mm m³ mm

Flat (F) Volume Surface area Weight of end

Hemispherical (H) 0.000 0.000 0.00

m³ m² kgs

mm m³ mm

m² kgs

Flat (F) 0.000 0.000 0.00

0.000 0.000 0.00

m³ m² kgs