Premium Line Catalogue Synology, Rextron, Linkqnet, Lindy Connection Perfection, Unitek, Brateck Technology, Micronet, Rose Electronics, Minicom, Rapid Run, Apacer, Dell, D-Link, Epson, Fujitsu, HP, Lenovo, Lexmark, LG Electronics, Logitech, Microsoft, Motorola Solutions, Pinnacle CCTV, Proline, Samsung, Qnap, Seagate, Sharp, Sony, Supermicro, Trendnet, Western Digital, Lambda Cable, Panduit, RIT Technologies, Global Six, Molex Premise Networks, Premium Line Cabling, IBM, Intel, Cougar, Kodak, Parrot Products, CBI Electric, CBI Telecommunication Cable, Aberdare Cables, Klotz Cable, Tyco Electronics, Teldor Cables & Systems, Legrand Electrical & Data Products, Netgear, Lapp Kabel, Mecer, Brother, ADC Krone, Polycom Video Conference Phones, Oracle Hardware, Acer, McAfee, Fluke Networks, Tripp Lite, Rittal, Cannon, BlackBerry, Kramer Electronics, Crestron, Hitachi Projectors, Hitachi Flat Panel TV, Hitachi Camcorder, VCOM Cable & Electronics, AMP Netconnect Connectors, HDMI, Cables to

June 3, 2016 | Author: sntechnology.co.za | Category: Types, Business/Law, Technology
Share Embed Donate


Short Description

Synology, Rextron, Linkqnet, Lindy Connection Perfection, Unitek, Brateck Technology, Micronet, Rose Electronics, Minico...

Description

Copper Solution

Category 6A+ Cabling Solutions

Contents

Cat.6A+ 1000MHz S/FTP Installation Cable ············································································································· A1 Cat.6A+ S/FTP Patch Cord ······································································································································· A2 Cat.6A+ 90° Fully Shielded Die-casting Keystone Jack ···························································································· A3 Modular German Outlet ············································································································································· A4

Category 6A Cabling Solutions Cat.6A S/FTP & U/UTP Installation Cable Series ································································································B1-B3 Cat.6A 90° & 180° Shielded Keystone Jack·········································································································B4-B5 Modular Patch Panel ················································································································································· B6 Cat.6A 90° & 180° U/UTP Keystone Jack ············································································································B7-B8 Cat.6A S/FTP & U/UTP Patch Cord Series ········································································································B9-B10

Category 6 Cabling Solutions Cat.6 U/FTP & U/UTP Installation Cable Series ································································································· C1-C2 Cat.6 Shielded & Unshielded Compact Outlet ···································································································· C3-C4 Cat.6 90° & 180° Shielded and Unshielded Keystone Jack Series ··································································· C5-C10 Feature 24 Port Unshielded Modular Patch Panel ·································································································· C11 Cat.6 Shielded & Unshielded Patch Panel Series ··························································································· C12-C15 Cat.6 S/FTP & U/UTP Patch Cord Series ······································································································· C16-C18

Category 5e Cabling Solutions Cat.5e F/UTP & U/UTP Indoor and Outdoor Installation Cable Series ······························································· D1-D3 Cat.5e Shielded & Unshielded Compact Outlet ·································································································· D4-D5 Cat.5e 90° & 180° Shielded and Unshielded Keystone Jack Series ··································································· D6-D8 Cat.5e Shielded & Unshielded Patch Panel Series ··························································································· D9-D11 Cat.5e SF/UTP & U/UTP Patch Cord Series··································································································· D12-D14

Navigator Patch System Navigator Patch System ·······································································································································E1-E2

Voice & Data Product Series Cat.3 U/UTP Indoor and Outdoor Multipair Cable Series····················································································· F1-F2 ISDN(Cat.3) 90° Unshielded Patch Panel ················································································································· F3 110 Cross Connect··············································································································································· F4-F6 LSA Module & Modular Rack Mounted Block & Distribution Box ········································································· F7-F8

Tools & Accessories Crimp & Punch Tools Series ·······························································································································G1-G2 Modular Faceplate···············································································································································G3-G4 T- Adapter ·································································································································································G5 Inline Coupler ····························································································································································G5 Junction Box ······························································································································································G6 Industrial Toolless RJ45 Plug ····································································································································G6

Cabinets Data Center Server Cabinet Network Server Cabinet ············································································································································ H1 Wall Mount Cabinet ··················································································································································· H2 Accessory ·································································································································································· H3 Cable Management ··················································································································································· H4 Power Distribution Unit ········································································································································ H5-H6 Uninterruptible Power Supply ······························································································································ H7-H8

Fiber Optic Solution WAN & LAN Cabling Solution Optic Fiber Characteristics ····································································································································· I1-I2 WAN Aerial & Duct Application Fiber Optic Cable Series & Enclosures ································································ I3-I8 LAN Indoor & Campus Backbone Fiber Optic Cable Series & Enclosures ·························································· I9-I13 Pigtails, Patch Cords, Adapters, Connectors & Zipcord Cables········································································· I14-I17 FTTH G652D & G657 Series, Fiber Optic Wall Box & Faceplates····································································· I18-I19 Fusion Splicer & Accessories ····································································································································I20

High Performance for the Future Premium-Line Systems GmbH is a part of global manufacturing group with more than 20 years of experience on the field of networking market. Premium Line system is a comprehensive solution for the network infrastructure, mainly designed in Europe, with a complete product portfolio including copper and fiber optic patch cords, installation cables, patch panels, outlets, keystones, cabinets and workstation components for Category 5e, Category 6, Category 6A, Category 7 and fiber optic structured cabling systems. Since the beginning of the nineties we have been devoted to researching and developing the modern signal transmission cable and the joint hardware. Through almost twenty years of efforts, we succeeded in developing of high performance tested network transmission products. It is a matter of course that our team of professional designers attends to all specific inquiries from our customers worldwide.

Premium Line Your Professional Partner of Structured Cabling System Integrated Strength of Manufacture & System Integrator Premium Line owns over 20 years experience in developing and manufacturing of data cabling products; and also the experience of marketing and promoting under its own brand – “Premium Line”. With this strength, also the complete range product series for data communication cabling use, these keeping us in the leading edge over worldwide market. Till today, we’ve successfully cooperated with our certified team accomplished over hundreds of projects over the world.

Quality & Service Premium Line has dedicated teams to be responsible for internal quality monitoring and products systemic upgrading, and also be responsible for customer quality & technical support and service maintenance. All products will be verified both accordingly from the stage when raw materials input, and continuous monitoring till it actives in the site. This build up a complete quality & service policy covering the physically basic "RoHs compliant" assurance, and also the promise to performance & quality services! Third Party Lab Certification Support With the outside third party Lab certification, including 3P, ETL certificate for electrical performance; UL & (C)UL for sheath flaming test, Premium Line is available to provide fully range of product certifications to satisfy worldwide market and project requirements. 25 Years Cabling System Warranty Premium Line guarantees all data links for 25 years, which consist of Premium Line own brand network components and installed by authorized installers.

Category 6A, Category 6 and Category 5e Premium Line Cabling System delivers end-to-end solution for converged networks with high flexibility and proven interoperability to ensure smooth deployment and

Our Advantages

simplified management. Professional design and advanced leading processes supported by large

◎ 25 Years System Warranty – Guarantee all data network system for 25 years which consists of Premium Line products ◎ Cabling training and Certificate course ◎ Dedicated R&D team for new products design ◎ Professional sales team for worldwide marketing guidance ◎ Plant based Product Management & logistic team for technique, quality and shipment support

manufacturing capacities evoke the products to be in great demand. New products development and constant process improvement are two key approaches to maintain the company’s competitiveness. All Premium Line cabling systems installed by an authorized Premium Line Installer or by a  System Center are backed by a  25-year warranty. This warranty provides each enduser the confidence of a  future-proofed system. In time of high data transmissions and growing demand on bandwidth parameters a proofed networking infrastructure system becomes a must. With Premium Line you can afford this.

Access to High Speed Ethernet Category 6A+ Cabling Solutions

Premium Line CATEGORY 6A+ CABLING SOLUTIONS Installation Cable Category 6A+ S/FTP 1000MHz

Patch Cord Category 6A+ S/FTP Patch Cord

Keystone Jack 10G Standard 2006, standard IEEE 802.3an is ratified to provide 10 Gbit/s connections over unshielded or shielded twisted pair cables, and specified transmission characteristics up to 500MHz. This requires Category 6A or better balanced twisted pair cables comply with ISO 11801 amendment 2 or ANSI/TIA-568-C.2 to support 10GBASE-T up to distances of 100 m. So far, 10G BASE-T Ethernet is the fastest LAN connection path over copper communication solutions.

10G Bandwidth 10GBASE-T system requires the cable works as full duplex mode, which means use 4 pairs for simultaneous transmission in both directions, and to support 100m data transmission, it must use Category 6A 500MHz at a minimum. Premium Line Category 6A+ 1000MHz communication cable, with the significant higher bandwidth to provide bigger quantity of “data path” , definitely guarantees you stable and excellent practical 10G network and capable to support higher speed application. For the future building data network upgrade, Premium Line 1000MHz cable is special design to assure the bandwidth to be compatible with the faster and faster network change and develop. And it will be also make the system upgrade project easy and comfortable as only need to change the module of both side for the permanent links.

“MADE IN GERMANY” Solution As Europe now is leading edge of 10 G shielded solutions, Premium Line Systems GmbH combine strength of own experienced R&D team and special know-how market wise to provide a MADE IN GERMANY Category 6A+ shielded solution. High quality assurance as always the German quality products perform!

Category 6A+ Shielded Die-casting Keystone Jack

Modular German Outlet

CATEGORY 6A+ CABLING SOLUTIONS

www.premiumline-cabling.com

Installation Cable

Category 6A+ S/FTP 1000MHz Standards: ◎ ISO/IEC 2nd Edition Amendment 1.2

Patch Cord

◎ CENELEC EN 50288-10-1, EN 50288-4-1

Category 6A+ S/FTP Patch Cord

204442225

◎ ISO/IEC 61156-6

Premium Line Category 6A+ S/FTP patch cord supports the whole Category 6A channel

◎ ANSI/TIA-568-C.2

transmission as per standard ANSI/TIA-568-C.2, ISO/IEC 11801 and EN 50173-1 Class

◎ RoHS Compliant

Conductor

Application:

EA specifications. And the product is finished with LSOH outer sheath.

Insulation

◎ 10G BASE-T Ethernet ◎ 1000BASE-TX (Gigabit Ethernet)

Al-Mylar foil

◎ 1000BASE-T (Gigabit Ethernet)

Tinned copper braiding

AL-Mylar Insulation

◎ 100BASE-TX Fast Ethernet ◎ 10BASE-T Ethernet

Sheath

Sheath

◎ Voice

Braid

Mechanical & Environmental Characteristics

Construction Conductor Insulation

Material / size Material

Inner-Shield

Aluminum-Mylar Material Coverage Material Diameter

Braid Sheath

Bare Copper / 23 AWG Foam-Skin PE An Aluminum Foil Screen Around Each Pair Tinned Copper Nom. 48% LSOH 7.4± 0.3 mm

≥ 4D, without load ≥8D, with load

Bending Radius Operation Temperature Installation Temperature Storage Temperature

Conductor

0°C~+50°C -10°C~+50°C -20°C~+50°C

Electrical Performance Freq

Insertion Loss

NEXT

(dB)

(dB/100m) Nor. Typ. 74.3 100.0 65.3 100.0 59.3 100.0 56.2 100.0 54.8 100.0 51.9 100.0 47.4 100.0 44.3 98.0 39.8 93.0 39.3 92.1 37.1 91.0 35.3 89.1 33.2 87.3 32.7 86.1 30.8 83.1 30.0 82.0 29.3 81.0

(MHz) 1.0 4.0 10.0 16.0 20.0 31.25 62.5 100.0 200.0 250.0 300.0 400.0 550.0 600.0 800.0 900.0 1000.0

Nor. 2.1 3.8 5.9 7.5 8.4 10.5 15.0 19.1 27.6 31.1 34.3 40.1 47.6 50.0 58.7 62.7 66.6

Typ. 1.7 3.4 5.0 6.4 7.1 9.0 13.0 16.8 23.9 28.5 29.2 33.4 37.2 42.6 48.2 53.8 57.5

PS NEXT

ACR-F

(dB) Nor. 72.3 63.3 57.3 54.2 52.8 49.9 45.4 42.3 37.8 36.3 35.1 33.3 31.2 30.7 28.8 28.0 27.3

PS ACR-F

(dB) Typ. 97.0 97.0 97.0 97.0 97.0 97.0 97.0 95.0 90.0 89.1 88.0 86.1 84.3 83.1 80.1 79.0 78.0

Nor. 67.8 55.8 47.8 43.7 41.8 37.9 31.9 27.8 21.8 19.8 18.3 15.8 13.0 12.3 9.8 8.8 7.8

Return Loss

(dB) Typ. 90.0 90.0 90.0 90.0 90.0 90.0 85.0 81.0 77.0 76.0 71.0 68.1 66.2 60.0 52.1 48.0 46.0

Nor. 64.8 52.8 44.8 40.7 38.8 34.9 28.9 24.8 18.8 16.8 15.3 12.8 10.0 9.3 6.8 5.8 4.8

(dB) Typ. 87.0 87.0 87.0 87.0 87.0 87.0 82.0 78.0 74.0 73.0 68.0 65.1 63.1 57.0 49.1 45.0 43.0

Nor. 20.0 23.0 25.0 25.0 25.0 23.6 21.5 20.1 18.0 17.3 16.8 15.9 14.9 14.6 13.7 13.4 13.1

Typ. 30.0 33.0 35.0 35.0 35.0 33.6 31.5 30.1 28.0 27.3 27.3 27.3 27.3 27.3 27.3 25.0 24.0

Category 6A+ S/FTP 1000MHz Installation Cable PART NO. 204442225

DESCRIPTION Premium Line Category 6A+ S/FTP Installation Cable, 500m reel, LSOH, 1000 MHz

- A/1 -

PACKING SIZE 45(O.D)×29.8(H) cm

Construction Conductor Insulation Inner-Shield Braid Sheath

Material / size Material Aluminum-Mylar Material Coverage Material Diameter

Category 6A+ S/FTP Patch Cord Length Grey 0.5 m 1m 2m 3m 5m 7m 10 m

188420055 188420105 188420205 188420305 188420505 188420705 188421005

Bare Copper / 26 AWG Foam-Skin PE An aluminum foil Screen Around Each Pair Tinned Copper Nom. 48% LSOH 5.7± 0.3 mm

Green

Blue

Red

Yellow

188420056 188420106 188420206 188420306 188420506 188420706 188421006

188420054 188420104 188420204 188420304 188420504 188420704 188421004

188420053 188420103 188420203 188420303 188420503 188420703 188421003

188420058 188420108 188420208 188420308 188420508 188420708 188421008

- A/2 -

CATEGORY 6A+ CABLING SOLUTIONS

◎ ISO/IEC 61156-5 2nd Edition

CATEGORY 6A+ CABLING SOLUTIONS

www.premiumline-cabling.com

Keystone Jack

Category 6A+ Shielded Die-casting Keystone Jack

◎ Design and assemble in Germany, Completely a “Made in Germany" module

Modular German Outlet Premium Line shutter type modular outlet is in standard German style, finished in 80×80 size. Available to provide RAL9010 and RAL1013 color for option. And also the compatible back box with same color is on your request.

◎ Real ISO/IEC 11801 compliant module ◎ All condition excellent performance to support your LAN access ◎ Easy and quick installation, reliable contact & connectivity ◎ Standard RJ45 socket with springs for loop grounding noise transferring ◎ Nickel plated over zinc alloy fully shield housing, reliable mechanical structure ◎ Finish product in compact design, standard size fits with worldwide style outlets ◎ Compatible with Premium Line modular patch panel for datacenter or cross connect use

Physical Characteristics Jack

Phosphor bronze, 50μ inch gold plating over nickel in contact area

IDC

100μ inch nickel plated over phosphor bronze

Shielded Cover

50~60μ inch nickel plated over phosphor bronze

123212090

Electrical Characteristics Dielectric Strength

1000V RMS for 1min

Current Rating

1.5Amp Max.

Insulation Resistance

10MΩ Min.

Contact Resistance

2mΩ per contact

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

Applications 108514010

◎ 10GBASE-T Ethernet ◎ 1000BASE-TX Gigabit Ethernet ◎ 1000BASE-T Gigabit Ethernet

112003080

◎ 100BASE-TX Fast Ethernet. ◎ 10BASE-T Ethernet. ◎ Voice, Video and other applications.

Modular German Outlet All the products are verified to the electrical characteristics required in the directive.

Category 6A+ Shielded Die-casting Keystone Jack PART NO. 108514010

DESCRIPTION Premium Line Category 6A+ 90° Shielded Die-casting Keystone Jack

- A/3 -

PACKING SIZE 53.8×35.2× 27cm

PART NO. 123212090 123212080 112003090 112003080

DESCRIPTION 2-Port 45° Modular Outlet for Keystone with Shutter, 80×80 mm, RAL 9010 2-Port 45° Modular Outlet for Keystone with Shutter, 80×80 mm, RAL 1013 Wall Mounted Back Box 80×80×45 mm, Color RAL 9010 Wall Mounted Back Box 80×80×45 mm, Color RAL 1013

- A/4 -

PACKING SIZE 47.5×38.5×26 cm 47.5×38.5×26 cm 43×31×29 cm 43×31×29 cm

CATEGORY 6A+ CABLING SOLUTIONS

Premium Line 90 ° shielded Die-casting Keystone Jack in special design for optimal EMI protection. Toolless design no need additional tools for termination, supports T568 A&B wiring. The finish product complies with EU RoHS directive.

CATEGORY 6A CABLING SOLUTIONS 10 Gigabit Ethernet is nowadays viable solution for destinations with very high data traffic concentration like data center, server farms, MAN’ s and backbones.

Premium Line Category 6A Cabling Solutions

Need of 10 Gigabit Service Application as high resolution digital videos, medical imaging, digital animation, CAD/CAM, high speed data storage also require the quality of service (QoS) inherent in 10 Gigabit Ethernet. IP-based services such as VoIP and video will require extended bandwidth. Greater bandwidth is

Installation cable Category 6A S/FTP 600MHz

also required as voice, data and video networks are coming into structured cabling systems, as is the case already for today’ s more advanced

Category 6A U/UTP 500MHz

security systems.

Shielded Keystone Jack Category 6A Shielded Keystone Jack

Standard of 10 Gigabit

Category 6A Shielded Die-Casting Keystone Jack

In 2002 the IEEE ratified already a 10 Gigabit Ethernet standard for a full duplex fiber technology. Considering the world wide market need, the

Unshielded Keystone Jack

technology’ s potential and the economies offered by copper cabling system, both IEEE and TIA/EIA have now in summer 2006 ratified the new standard IEEE 802.3an TM Category 6A.

Demand of 10 Gigabit Systems

Category 6A 90° Unshielded Keystone Jack Category 6A 180° Unshielded Keystone Jack

Modular Patch Panel High Density Unloaded Patch Panel for Die-casting Keystone Jacks

As from the experience of the past at the time 100 Mb/s and later on 1 Gb/s were as standards ratified we expect a potential for 10G structured

Universal Unloaded Patch Panel

cabling systems in the mass market. Bandwidth will be for many applications in the near future the key issue, so it will be important to invest

Patch Cord

future proofed in 10G-enable twisted pair structured cabling solutions. Premium Line 10G Cat.6A cabling solution provides transmission performance that exceeds the industry standards for category 6 parameters and supports the operation of 10GBASE-T over 100-meter. 10G Cat.6A cabling solutions are qualified for frequencies up to 500 MHz and deliver guaranteed applications.

Features 1. Performance conforms to TIA/EIA568-C.2, ISO/IEC 11801:2002 Ed2.0 & Amendment 1 draft, TIA-TSB-155 draft and EN 50173-1, IEEE 802.3an™ Category 6A specifications. 2. Supports T568 A&B Wiring & Easy installation. 3. Offers total solution of 10G Cat.6A Network Cabling System.

Application • 10GBASE-T Ethernet • 1000BASE-TX Gigabit Ethernet • ATM CB1G • 1000BASE-T Gigabit Ethernet • 100BASE-TX Fast Ethernet • 10BASE-TX Ethernet • 155/622 Mbps ATM • 100 Mbps TP-PMD

Category 6A S/FTP Patch Cord Category 6A U/UTP Patch Cord

CATEGORY 6A CABLING SOLUTIONS

www.premiumline-cabling.com

ETL Certified 6 Round 1 Alien Near End Crosstalk Compliant Cable ! During full network operation, all wire pairs in a cabling bundle simultaneously transmit in full duplex. Therefore, any one wire pair will be affected by transmissions on numerous wire pairs surrounding it in a cabling bundle or pathway. AxTalk is a challenge for twisted-pair cabling as it is the most significant disturbance or noise source for the 10 Gb E applications. Premium Line Cat. 6A 6 round 1 cable is right design to fulfill this requirement.

Installation Cable

Category 6A S/FTP 600MHz

Installation Cable

Standards:

100 m Cable Bundle

1 6 2 7 3 5 4 6″

6×4 Outer Crosstalker 1×4 Inner Victim

Soruce Cable:1~6 Victim Cable: 7

Category 6A U/UTP 500MHz

◎ ISO/IEC 2nd Edition Amendment 1.2

Standards:

◎ ISO/IEC 61156-5 2nd Edition

◎ ANSI/TIA-568-C.2

◎ ANSI/TIA-568-C.2

◎ ISO/IEC 2nd Edition Amendment1.2

◎ IEC 60332-1

207442225

◎ CENELEC EN 50288-10-1

◎ IEC 60754-2

209941225

◎ ISO/IEC 61156-5 2nd Edition

◎ UL listed

Conductor

◎ RoHS compliant

Insulation

Application:

Al-Mylar foil

◎ RoHS compliant

◎ 10G BASE-T Ethernet

Tinned copper braiding

Application:

Conductor

◎ 1000BASE-TX (Gigabit Ethernet)

Drain wire (Optional)

◎ 1000BASE-T (Gigabit Ethernet)

◎ 10G BASE-T Ethernet ◎ 1000BASE-TX (Gigabit Ethernet)

Cross-Member

Sheath

◎ ETL certified ANSI/TIA/EIA-568-B.2-10 Category 6A tested PSANEXT & PSAACR-F

◎ 100BASE-TX Fast Ethernet

◎ 100BASE-TX Fast Ethernet

◎ Voice

Mechanical & Environmental Characteristics

Construction Conductor Insulation

Material / size Material

Inner-Shield

Aluminum-Mylar Material Coverage Material Diameter

Braid Sheath

Bare Copper / 23 AWG Foam-Skin PE An Aluminum Foil Screen Around Each Pair Tinned Copper Nom. 48% LSOH 7.4± 0.3 mm

≥ 4D, without load ≥8D, with load

Bending Radius Operation Temperature Installation Temperature Storage Temperature

0°C~+50°C

NEXT

(dB)

(dB/100m) Nor. Typ. 74.3 100.0 65.3 100.0 59.3 100.0 56.2 100.0 54.8 100.0 51.9 100.0 47.4 100.0 44.3 98.0 39.8 93.0 38.3 92.1 37.1 91.0 35.3 89.1 33.2 87.3 32.7 86.1

1.0 4.0 10.0 16.0 20.0 31.25 62.5 100.0 200.0 250.0 300.0 400.0 550.0 600.0

Typ. 1.7 3.4 5.0 6.4 7.1 9.0 13.0 16.8 23.9 28.5 29.2 33.4 37.2 42.5

Mechanical & Environmental Characteristics

Construction

-10°C~+50°C -20°C~+50°C

Sheath

PS NEXT

ACR-F

(dB) Nor. 72.3 63.3 57.3 54.2 52.8 49.9 45.4 42.3 37.8 36.3 35.1 33.3 31.2 30.7

PS ACR-F

(dB) Typ. 97.0 97.0 97.0 97.0 97.0 97.0 97.0 95.0 90.0 89.1 88.0 86.1 84.3 83.1

Nor. 67.8 55.8 47.8 43.7 41.8 37.9 31.9 27.8 21.8 19.8 18.3 15.8 13.0 12.3

Return Loss

Freq

(dB)

(MHz)

(dB) Typ. 90.0 90.0 90.0 90.0 90.0 90.0 85.0 81.0 77.0 76.0 71.0 68.1 33.2 60.0

Nor. 64.8 52.8 44.8 40.7 38.8 34.9 28.9 24.8 18.8 16.8 15.3 12.8 10.0 9.3

Typ. 87.0 87.0 87.0 87.0 87.0 87.0 82.0 78.0 74.0 73.0 68.0 65.1 63.1 57.0

Nor. 20.0 23.0 25.0 25.0 25.0 23.6 21.5 20.1 18.0 17.3 16.8 15.9 14.9 14.6

Typ. 30.0 33.0 35.0 35.0 35.0 33.6 31.5 30.1 28.0 27.3 27.3 27.3 27.3 27.3

Category 6A S/FTP Installation Cable PART NO. 207442225

◎ Voice

Material / size Material Material Material Diameter

Bare Copper / 23 AWG HDPE PE PVC/LSOH 10.5± 0.3 mm

Bending Radius Operation Temperature Installation Temperature Storage Temperature

≥ 4D, without load ≥8D, with load 0°C~+50°C -10°C~+50°C -20°C~+50°C

Electrical Performance

Insertion Loss Nor. 2.1 3.8 5.9 7.5 8.4 10.5 15.0 19.1 27.6 31.1 34.3 40.1 47.6 50.0

Sheath

◎ 10BASE-T Ethernet

Conductor Insulation "+" Cross-Member

Electrical Performance (MHz)

Insulation

◎ 1000BASE-T (Gigabit Ethernet)

◎ 10BASE-T Ethernet

Freq

CATEGORY 6A CABLING SOLUTIONS

◎ CENELEC EN 50288-10-1

DESCRIPTION Premium Line Category 6A S/FTP Installation Cable, 500 m reel, LSOH,600 MHz

- B/1 -

PACKING SIZE 45(O.D)×29.8(H) cm

1.0 4.0 10.0 16.0 20.0 31.25 62.5 100.0 200.0 250.0 300.0 400.0 500.0

Insertion Loss (dB) Nor. Typ. 2.1 1.7 3.8 3.3 5.9 5.3 7.5 6.8 8.4 7.6 10.5 9.5 15.0 13.7 19.1 17.5 27.6 25.1 31.1 28.1 34.3 30.9 40.1 36.1 45.3 40.5

NEXT

PS NEXT

PSA NEXT

ACR-F

PS ACR-F

PSA ACR-F

Return Loss

(dB/100m) Nor. Typ. 74.3 102.0 65.3 95.0 59.3 93.0 56.2 90.0 54.8 87.0 51.9 84.0 47.4 82.0 44.3 77.0 39.8 74.0 38.3 72.0 37.1 70.0 35.3 68.0 33.8 66.0

(dB) Nor. Typ. 72.3 100.0 63.3 94.2 57.3 92.9 54.2 90.5 52.8 87.1 49.9 84.5 45.4 82.3 42.3 77.9 37.8 74.2 36.3 72.3 35.1 69.3 33.3 68.1 31.8 65.9

(dB) Nor. Typ. 67.0 92.7 67.0 95.3 67.0 99.7 67.0 100.1 67.0 98.3 67.0 98.4 65.6 99.4 62.5 94.7 58.0 91.3 56.5 89.4 55.3 56.9 53.5 85.3 52.0 83.2

(dB) Nor. Typ. 67.8 99.8 55.7 94.0 47.8 87.8 43.7 79.8 41.7 76.9 37.9 73.1 31.8 68.3 27.8 63.1 21.7 50.3 19.8 50.7 18.2 49.2 15.7 44.2 13.8 41.3

(dB) Nor. Typ. 64.8 91.5 52.7 80.7 44.8 72.6 40.7 68.4 38.7 66.4 34.9 62.9 28.8 56.3 24.8 51.8 18.7 46.9 16.8 44.2 15.2 42.1 12.7 41.3 10.8 39.5

(dB) Nor. Typ. 67.0 90.9 66.2 93.9 58.2 86.6 54.1 80.5 52.2 78.2 48.3 74.4 42.3 68.8 38.2 63.9 32.2 55.1 30.2 53.9 28.7 52.2 26.2 49.3 24.2 46.8

(dB) Nor. Typ. 20.0 26.5 23.0 36.0 25.0 43.0 25.0 49.0 25.0 52.0 23.6 48.0 21.5 48.0 20.1 45.0 18.0 43.0 17.3 37.0 16.8 34.0 15.9 34.0 15.2 34.0

Category 6A U/UTP Installation Cable PART NO. 209941225 209942225

DESCRIPTION Premium Line Category 6A U/UTP Installation Cable, 500 m reel, PVC, 500 MHz Premium Line Category 6A U/UTP Installation Cable, 500 m reel, LSOH, 500 MHz

- B/2 -

PACKING SIZE 50(O.D)×34(H) cm 50(O.D)×34(H) cm

CATEGORY 6A CABLING SOLUTIONS

www.premiumline-cabling.com

Installation Cable

Category 6A U/UTP 500MHz Standards: ◎ ISO/IEC 2nd Edition Amendment1.2

Category 6A Shielded Keystone Jack

◎ CENELEC EN 50288-10-1

Premium Line 90 ° shielded Keystone Jack is in fully shielded design, optimizes shield effectiveness protection from EMI. Dual IDC connector can accept 22-26 AWG solid cables, supports T568 A&B wiring, and using 110 or Krone tools for termination. The finish product complies with EU RoHS directive. Premium Line Category 6A shielded Keystone Jack performance conform to ANSI/TIA-568-C.2, ISO/IEC 11801 and EN50173-1 Class EA specifications, supports the channel link bandwidth up to 500MHz.

◎ ISO/IEC 61156-5 2nd Edition ◎ ETL certified ANSI/TIA/EIA-568-B.2-10

209141225

Category 6A (not tested for PSANEXT & PSAACR-F) ◎ RoHS compliant

Insulation

Application:

Sheath

2

3

1

4

◎ 10G BASE-T Ethernet ◎ 1000BASE-TX (Gigabit Ethernet) Cross-Member

◎ 1000BASE-T (Gigabit Ethernet)

Conductor

◎ 100BASE-TX Fast Ethernet

Physical Characteristics

◎ 10BASE-T Ethernet ◎ Voice

Jack

Phosphor bronze, 50μ inch gold plating

IDC

100μ inch nickel plated over phosphor

Shielded Cover

50~60μ inch nickel plated over phosphor

over nickel in contact area

Mechanical & Environmental Characteristics

Construction Conductor Insulation "+" Cross-Member

Material / size Material Material Material Diameter

Sheath

Bare Copper / 23 AWG HDPE PE PVC/LSOH 7.5± 0.3 mm

Bending Radius Operation Temperature Installation Temperature Storage Temperature

≥ 4D, without load ≥8D, with load 0°C~+50°C -10°C~+50°C -20°C~+50°C

Insertion Loss

NEXT

(dB)

(dB/100m) Nor. Typ. 74.3 102.0 65.3 95.0 59.3 93.0 56.2 90.0 54.8 87.0 51.9 84.0 47.4 82.0 44.3 77.0 39.8 74.0 38.3 72.0 37.1 70.0 35.3 68.0 33.8 66.0

(MHz) 1.0 4.0 10.0 16.0 20.0 31.25 62.5 100.0 200.0 250.0 300.0 400.0 500.0

Nor. 2.1 3.8 5.9 7.5 8.4 10.5 15.0 19.1 27.6 31.1 34.3 40.1 45.3

Typ. 1.7 3.3 5.3 6.8 7.6 9.5 13.7 17.5 25.1 28.1 30.9 36.1 40.5

PS NEXT

ACR-F

(dB) Nor. 72.3 63.3 57.3 54.2 52.8 49.9 45.4 42.3 37.8 36.3 35.1 33.3 31.8

PS ACR-F

(dB) Typ. 100.0 94.2 92.9 90.5 87.1 84.5 82.3 77.9 74.2 72.3 69.3 68.1 65.9

Nor. 67.8 55.7 47.8 43.7 41.7 37.9 31.8 27.8 21.7 19.8 18.2 15.7 13.8

Return Loss

(dB) Typ. 99.8 94.0 87.8 79.8 76.9 73.1 68.3 63.1 50.3 50.7 49.2 44.2 41.3

Nor. 64.8 52.7 44.8 40.7 38.7 34.9 28.8 24.8 18.7 16.8 15.2 12.7 10.8

(dB) Typ. 91.5 80.7 72.6 68.4 66.4 62.9 56.3 51.8 46.9 44.2 42.1 41.3 39.5

Nor. 20.0 23.0 25.0 25.0 25.0 23.6 21.5 20.1 18.0 17.3 16.8 15.9 15.2

Typ. 26.5 36.0 43.0 49.0 52.0 48.0 48.0 45.0 43.0 37.0 34.0 34.0 34.0

109211010

Electrical Characteristics 1000V RMS for 1min

Current Rating

1.5Amp Max.

Insulation Resistance

10MΩ Min.

Contact Resistance

2mΩ per contact

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

Applications ◎ 10GBASE-T Ethernet ◎ 1000BASE-TX Gigabit Ethernet ◎ 1000BASE-T Gigabit Ethernet ◎ 100BASE-TX Fast Ethernet. ◎ 10BASE-T Ethernet. ◎ Voice, Video and other applications. All the products are verified to the electrical characteristics required in the directive.

Category 6A U/UTP Installation Cable PART NO. 209141225 209142225

bronze

Dielectric Strength

Electrical Performance Freq

bronze

DESCRIPTION Premium Line Category 6A U/UTP Installation Cable, 500 m reel, PVC, 500 MHz Premium Line Category 6A U/UTP Installation Cable, 500 m reel, LSOH, 500 MHz

- B/3 -

PACKING SIZE 50(O.D)×34(H) cm 50(O.D)×34(H) cm

Category 6A 90° Shielded Keystone Jack PART NO. 109211010

DESCRIPTION Premium Line Category 6A 90° Shielded Keystone Jack, Dual Type IDC

- B/4 -

PACKING SIZE 53.8×35.2×27 cm

CATEGORY 6A CABLING SOLUTIONS

Shielded Keystone Jack

◎ ANSI/TIA-568-C.2

CATEGORY 6A CABLING SOLUTIONS

www.premiumline-cabling.com

Modular Patch Panel High Density Unloaded Patch Panel for Die-casting keystone Jacks Premium Line High Density Unloaded Patch Panel is in dedicated design to adopt Premium Line 180 ° shielded die-casting keystone jack, to meet different place use intentions. And in additional, this modular patch panel is also available to fit with Premium Line 180 ° UTP keystone jacks. Each port has sequence numbering, and above markable position, is right to for future port identification or remanagement. Main body and back cable management made by single complete steel plate, finished in 1U 19” size, suits for all standard 19” rack installation.

Shielded Keystone Jack Category 6A Shielded Die-Casting Keystone Jack

170252402

High Density Unloaded Patch Panel for Die-casting keystone Jacks Physical Characteristics Body Material

PART NO. 170252402

Housing: PC, UL94 V-0

DESCRIPTION Premium Line High Density Shielded Unloaded Patch Panel with Integrated Bar

PACKING SIZE 50.5×27.9×27 cm

Body: zinc die-casting Jack Contact

phosphor bronze, 50μ inch gold plated over nickel

IDC Contacts

100μ inch nickel plated over phosphor bronze

Modular Patch Panel Universal Unloaded Patch Panel

Electrical Characteristics Dielectric Strength

Premium Line universal unloaded patch panel is in specified design to adopt Premium Line 90 ° shielded and unshielded keystone jack, and the feature design is also available to fit with Premium Line all shielded and unshielded keystone jacks. Shutter design is ideal for dust protection. Also the finish product comes with cable management bar at the back side. The finish size of this unloaded patch panel is 2U 19” , suits for 19” rack installation.

1000V RMS for 1min

Current Rating

1.5Amp Max.

Insulation Resistance

10MΩ Min.

Contact Resistance

2mΩ per contact

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

Applications ◎ 1000BASE-TX Gigabit Ethernet ◎ 1000BASE-T Gigabit Ethernet

109524010

◎ 100BASE-TX Fast Ethernet. ◎ 10BASE-T Ethernet. ◎ Voice, Video and other applications.

170042402

All the products are verified to the electrical characteristics required in the directive.

Category 6A Shielded Die-Casting Keystone Jack PART NO. 109524010

DESCRIPTION Premium Line Category 6A 180° Shielded Die-Casting Keystone Jack

- B/5 -

PACKING SIZE 53.8×35.2×27 cm

Universal Unloaded Patch Panel PART NO. 170042402

DESCRIPTION Premium line Unloaded Patch Panel with Cable Management Bar, 24 Port, Black

- B/6 -

PACKING SIZE 50.5×26×38 cm

CATEGORY 6A CABLING SOLUTIONS

Premium Line 180 ° shielded Die-casting Keystone Jack in special design for optimal EMI protection. Toolless design no need additional tools for termination, supports T568 A&B wiring. And the finish product fits with all kind of data outlets. Besides, it’ s compatible with specified unloaded patch panel, ideal for communication rack installation.

CATEGORY 6A CABLING SOLUTIONS

www.premiumline-cabling.com

Unshielded Keystone Jack

Category 6A 90° Unshielded Keystone Jack

Unshielded Keystone Jack

Category 6A 180° Unshielded Keystone Jack Premium Line 180 ° unshielded keystone jack is in classical design, be compatible with all Premium Line unloaded module. The dual type IDC accepts 22-26 AWG solid cables, easy terminated with 110 or Krone tools, supports T568 A&B wiring.

With its good & stable performance, this module earns the good sales result in the market

Physical Characteristics Physical Characteristics

Housing

PC, UL94 V-0

Housing

PC, UL94 V-0

Jack Contact

phosphor bronze, 50μ inch

Jack Contact

phosphor bronze, 50μ inch IDC Contacts

100μ inch nickel plated over

gold plated over nickel

gold plated over nickel IDC Contacts

100μ inch nickel plated over

phosphor bronze

phosphor bronze

Electrical Characteristics Electrical Characteristics

Dielectric Strength

1000V RMS for 1min

Current Rating

1.5Amp Max.

1.5Amp Max.

Insulation Resistance

10MΩ Min.

10MΩ Min.

Contact Resistance

2mΩ per contact

Contact Resistance

2mΩ per contact

Temperature Range

-10°C to 60°C

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

Humidity

10%~90%; non condensing

Dielectric Strength

1000V RMS for 1min

Current Rating Insulation Resistance

109111010

109121010

CATEGORY 6A CABLING SOLUTIONS

Premium Line 90 ° unshielded keystone jack is in classical design, the dual type IDC accepts 22-26 AWG solid cables, easy terminated with 110 or Krone tools, supports T568 A&B wiring.

Applications Applications

◎ 10GBASE-T Ethernet

◎ 10GBASE-T Ethernet

◎ 1000BASE-TX Gigabit Ethernet

◎ 1000BASE-TX Gigabit Ethernet

◎ 1000BASE-T Gigabit Ethernet

◎ 1000BASE-T Gigabit Ethernet

◎ 100BASE-TX Fast Ethernet.

◎ 100BASE-TX Fast Ethernet.

◎ 10BASE-T Ethernet.

◎ 10BASE-T Ethernet.

◎ Voice, Video and other applications.

◎ Voice, Video and other applications.

Category 6A 180° Unshielded Keystone Jack

Category 6A 90° Unshielded Keystone Jack PART NO. 109111010

DESCRIPTION Premium Line Category 6A 90° Unshielded Keystone Jack, Dual Type IDC, White

- B/7 -

PACKING SIZE 53.8×35.2×27 cm

PART NO. 109121010 171022402

DESCRIPTION Premium Line Category 6A 180° Unshielded Keystone Jack, Dual Type IDC, White Premium Line 24port High Density Unloaded Patch Panel for Unshielded Keystone Jacks, Black

- B/8 -

PACKING SIZE 53.8×35.2×27 cm 50.4×24.5×25.4 cm

CATEGORY 6A CABLING SOLUTIONS

www.premiumline-cabling.com

Patch Cord

Category 6A S/FTP Patch Cord

Patch Cord

Category 6A U/UTP Patch Cord Premium Line Category 6A U/UTP patch cord supports the whole channel transmission as per standard TIA/EIA-568C.2, ISO/IEC 11801 and EN 50173-1 Class EA specifications. The 24 AWG stranded conductor and flexible construction easy for bending or change. Normally, the patch cord will be in TIA 568B wiring, TIA 568A or other wiring method upon request. The patch cord is finished with snag proof boot.

Construction Conductor Insulation Inner-Shield Braid Sheath

Material / size Construction Material Aluminum-Mylar Material Coverage Material Diameter

Category 6A S/FTP Patch Cord Length Grey

Bare Copper / 26 AWG 7/0.16 ± 0.005 mm Foam-Skin PE an aluminum foil screen around each pair Tinned Copper Nom. 48% PVC / LS0H 5.7± 0.3 mm

Green

0,5 m 189420055 189420056 1m 189420105 189420106 2m 189420205 189420206 3m 189420305 189420306 5m 189420505 189420506 7m 189420705 189420706 10 m 189421005 189421006 Other lengths, colors or halogen free cables on request

Construction Conductor Insulation Sheath

Blue

Red

Yellow

189420054 189420104 189420204 189420304 189420504 189420704 189421004

189420053 189420103 189420203 189420303 189420503 189420703 189421003

189420058 189420108 189420208 189420308 189420508 189420708 189421008

- B/9 -

Material / size Construction Material Material Diameter

Category 6A U/UTP Patch Cord Length Grey

Bare Copper / 24 AWG 7/0.196 ± 0.01 mm HDPE PVC / LS0H 5.8± 0.3 mm

Green

0.5 m 189110055 189110056 1m 189110105 189110106 2m 189110205 189110206 3m 189110305 189110306 5m 189110505 189110506 7m 189110705 189110706 10 m 189111005 189111006 Other lengths, colors or halogen free cables on request

Blue

Red

Yellow

189110054 189110104 189110204 189110304 189110504 189110704 189111004

189110053 189110103 189110203 189110303 189110503 189110703 189111003

189110058 189110108 189110208 189110308 189110508 189110708 189111008

- B/10 -

CATEGORY 6A CABLING SOLUTIONS

Premium Line Category 6A S/FTP patch cord supports the whole channel transmission as per standard TIA/EIA-568C.2, ISO/IEC 11801 and EN 50173-1 EA specifications. With the individual pair screen and overall tinned copper braiding protection, against the pair to pair interference, environment noise also avoid signals leak. The 26 AWG stranded conductor and flexible construction easy for bending or change. Normally, the patch cord will be in TIA 568B wiring, TIA 568A or other wiring method upon request. The patch cord is finished with snag proof boot.

CATEGORY 6 CABLING SOLUTIONS With over 20 years experience and know-how on communicating products design & developing, Premium Line has built maturity systems both in high tech develop and research center & complete structural quality assurance lab and team. With team approach, all components and the cabling solutions, definitely will be your first choice and reliable selection.

Premium Line Category 6 Cabling Solutions Installation cable Category 6 U/FTP 450MHz Category 6 U/UTP 250MHz

Compact Outlet Solutions and Components

Category 6 Shielded Compact Outlet

Currently, the category 6 solution is the most popular in the structural cabling. Premium Line has been the

Category 6 Unshielded Compact Outlet

high quality source in the worldwide market since this becoming the trend. With the comprehensive product

Keystone Jack

range, we supply components – communication cables, keystone jacks, compact outlets, patch panels, patch cables, the complete solutions and system warranty. All these products and solution performance has been verified and approved by third party laboratory – “3P” and “ETL” . After years of good result in market also systemically upgrading of the products, assure you the great benefits both in quality and cost.

Category 6 Shielded Keystone Jack Category 6 Shielded Die-Casting Keystone Jack Category 6 90° & 180° Unshielded Keystone Jack Category 6 Unshielded Toolless Keystone Jack

Our Quality Guarantee

Category 6 90° Unshielded Slim Keystone Jack

To build a complete high level channel in the project, the precondition is to make sure each component with

Category 6 180° Unshielded Shutter Type Keystone Jack

compatible resistance, thus, the best solution is to use the same brand products or single component with

Modular Patch Panel

excellent performance. Premium Line offers you complete Cat.6 System solutions which fulfill these requirements, also with the internal specific definition and qualification procedure for each single component is right on the purpose to ease the installation with good and convincible field test results.

High Density Unloaded Patch Panel

Patch Panel Category 6 1U & 0.5U Shielded Patch Panel Category 6 Unshielded Patch Panel

Be Our 25 Years Warranty Member

Category 6 Labeling Holder Panel

To guide and support sites, which use complete Premium Line brand owned products, to get the 25 years

Patch Cord

warranty. Premium Line will hold distributor and site installer training and certification. With this certificate, all

Category 6 S/FTP Patch Cord

sites will be available to apply for 25 years quality warranty and service.

Project Support Our sales team will share you marketing strategy and almost world project information, which will help you to win the bid. Our international purchasing team will source you the special products to make your supply chain easy and simple.

Category 6 U/UTP System Patch Cord Category 6 U/UTP Retail Patch Cord Category 6 U/UTP Flat Patch Cord

CATEGORY 6 CABLING SOLUTIONS

www.premiumline-cabling.com

Premium Line Category 6 components comply with requirements as per standard ANSI/TIA 568-C.2, ISO/IEC 11801 ED.2, EN 50173-1, these consist of compete Category 6 channel to fully support the corresponding protocols & communication services.

Installation Cable

Category 6 U/FTP 450MHz

Category 6 U/UTP 250MHz

Standards:

Standards:

◎ ANSI/TIA-568-C.2

◎ ANSI/TIA-568-C.2

◎ ISO/IEC 11801 ED.2

◎ ISO/IEC 11801 ED.2 206641225

◎ CENELEC EN 50173-1

◎ CENELEC EN 50173-1

◎ CENELEC EN 50288-5-1

Conductor

◎ Flame retardancy according to IEC 60332-1-2

◎ flame retardancy is verified according to IEC 60332-1-2.

Insulation

◎ RoHS compliant

Application:

◎ 3P certified ANSI/TIA-568-B.2-1 ◎ RoHS compliant

◎ 100BASE-TX Fast Ethernet

Sheath

◎ 10BASE-T Ethernet

Drain Wire

◎ 1000BASE-TX (Gigabit Ethernet)

2

3

1

4

Cross Member

◎ 1000BASE-T (Gigabit Ethernet)

◎ Voice

◎ 100BASE-TX Fast Ethernet

Conductor

◎ 10BASE-T Ethernet

Construction Material / size Bare Copper / 23 AWG Material Foam-Skin PE Aluminum-Mylar An aluminum foil screen around each pair Material Stranded Tinned Copper / 26AWG Material PVC / LS0H Diameter 7.2± 0.3 mm

Mechanical & Environmental Characteristics Bending Radius Operation Temperature Installation Temperature Storage Temperature

≥ 4D, without load ≥8D, with load 0°C~+50°C -10°C~+50°C -20°C~+50°C

Freq Insertion Loss (MHz) (dB) Nor. Typ. 1.0 2.1 1.8 4.0 3.8 3.5 10.0 6.0 5.6 16.0 7.6 7.1 20.0 8.5 7.9 31.25 10.8 10.0 62.5 15.5 14.4 100.0 19.9 18.6 160.0 25.8 24.1 200.0 29.0 26.8 250.0 33.0 30.5 300.0 36.4 33.7 450.0 46.0 43.3

NEXT (dB/100m) Nor. Typ. 74.3 87.3 65.3 78.3 59.3 72.3 56.2 69.2 54.8 67.8 51.9 64.9 47.4 60.4 44.3 57.3 41.2 54.2 39.8 52.8 38.3 51.3 37.2 50.0 34.5 48.5

◎ Voice

Mechanical & Environmental Characteristics Construction Conductor Insulation Sheath

Electrical Performance PS NEXT (dB) Nor. Typ. 72.3 85.3 63.3 76.3 57.3 70.3 54.2 67.2 52.8 65.8 49.9 62.9 45.4 58.4 42.3 55.3 39.2 52.2 37.8 50.8 36.3 49.3 35.2 48.1 32.5 45.3

ACR (dB) Nor. Typ. 72.2 85.5 61.4 74.8 53.3 66.7 48.6 62.1 46.2 59.9 41.1 54.9 31.9 46.0 24.4 38.7 15.5 230.1 10.6 26.0 5.3 20.8 0.8 16.3 — 5.2

PS ACR (dB) Nor. Typ. 70.2 83.5 59.4 72.8 51.3 64.7 46.6 60.1 44.2 57.9 39.1 52.9 29.9 44.0 22.4 36.7 13.5 28.1 8.6 24.0 3.3 18.8 — 14.4 — 2.0

ACR-F (dB) Nor. Typ. 67.8 84.8 55.8 72.8 47.8 64.8 43.7 60.7 41.8 58.8 37.9 54.9 31.9 48.9 27.8 44.8 23.7 40.7 21.8 38.8 19.8 37.0 18.3 36.0 14.8 30.0

PS ACR-F (dB) Nor. Typ. 64.8 79.8 52.8 67.8 44.8 59.8 40.7 55.7 38.8 53.8 34.9 49.9 28.9 43.9 24.8 39.8 20.0 35.7 18.8 33.8 16.8 31.8 15.3 30.0 11.8 25.0

Return Loss (dB) Nor. Typ. 20.0 29.0 23.0 32.0 25.0 38.0 25.0 34.0 25.0 34.0 23.6 32.0 21.5 32.0 20.1 32.0 18.7 31.0 18.0 29.0 17.3 29.0 16.8 27.0 15.6 24.0

Category 6 U/FTP Installation Cable PART NO. 206641225 206642225

Sheath

Application:

◎ 1000BASE-T (Gigabit Ethernet)

Sheath

Insulation

◎ ETL certified ANSI/TIA-568-B.2-1

Al-Mylar foil

◎ 1000BASE-TX (Gigabit Ethernet)

Conductor Insulation Inner-Shield Drain Wire

206141115

◎ CENELEC EN 50288-6-1,

Bending Radius Material / size Material Material Diameter

Bare Copper / 23 AWG HDPE PVC / LS0H 6.2± 0.3 mm

Operation Temperature Installation Temperature Storage Temperature

≥ 4D, without load ≥8D, with load 0°C~+50°C -10°C~+50°C -20°C~+50°C

Electrical Performance Freq Insertion Loss (MHz) (dB) Nor. Typ. 1.0 2.1 1.8 4.0 3.8 3.5 10.0 6.0 5.6 16.0 7.6 7.1 20.0 8.5 7.9 31.25 10.8 10.0 62.5 15.5 14.4 100.0 19.9 18.6 160.0 25.9 24.1 200.0 29.0 26.8 250.0 33.0 30.5

NEXT (dB/100m) Nor. Typ. 74.3 82.3 65.3 73.3 59.3 67.3 56.2 64.2 54.8 62.8 51.9 59.9 47.4 55.4 44.3 52.3 41.2 49.2 39.8 47.8 38.3 46.3

PS NEXT (dB) Nor. Typ. 72.3 77.3 63.3 68.3 57.3 62.3 54.2 59.2 52.8 57.8 49.9 54.9 45.4 50.4 42.3 47.3 39.2 44.2 37.8 42.8 36.3 40.3

ACR (dB) Nor. Typ. 72.2 80.5 61.4 69.8 53.3 61.7 48.6 57.1 46.2 54.9 41.1 49.9 31.9 41.0 24.4 33.7 15.5 25.1 10.6 21.0 5.3 15.8

PS ACR (dB) Nor. Typ. 70.2 75.5 59.4 64.8 51.3 56.7 46.6 52.1 44.2 49.9 39.1 44.9 29.9 36 22.4 28.7 13.5 20.1 8.6 15.2 3.3 10.8

ACR-F (dB) Nor. Typ. 67.8 84.8 55.8 72.8 47.8 64.8 43.7 60.7 41.8 58.8 37.9 54.9 31.9 48.9 27.8 44.8 23.7 40.7 21.8 38.8 19.8 37

PS ACR-F (dB) Nor. Typ. 64.8 79.8 52.8 67.8 44.8 59.8 40.7 55.7 38.8 53.8 34.9 49.9 28.9 43.9 24.8 39.8 20 35.7 18.8 33.8 16.8 31.8

Return Loss (dB) Nor. Typ. 20.0 29.0 23.0 32.0 25.0 38.0 25.0 34.0 25.0 34.0 23.6 32.0 21.5 32.0 20.1 32.0 18.7 31.0 18.0 29.0 17.3 29.0

Category 6 U/UTP Installation Cable

DESCRIPTION Premium Line Category 6 U/FTP Installation cable, 500 m reels, PVC, Grey Premium Line Category 6 U/FTP Installation cable, 500 m reels, LSOH, Grey

- C/1 -

PACKING SIZE 50(O.D)×31(H) cm 50(O.D)×31(H) cm

PART NO. 206141115 206142115

DESCRIPTION Premium Line Category 6 U/UTP Installation Cable, 305m Box, PVC, Grey Premium Line Category 6 U/UTP Installation Cable, 305m Box, LSOH, Grey

- C/2 -

PACKING SIZE 45×45×21 cm 45×45×21 cm

CATEGORY 6 CABLING SOLUTIONS

Installation Cable

CATEGORY 6 CABLING SOLUTIONS

www.premiumline-cabling.com

Compact Outlet

Category 6 Unshielded Compact Outlet Premium Line compact outlet is in dedicated design for European market. With the high electrical performance also the high quality physical material used for inner construction and outside appearance, it provides both easy and reliable field installation also real long time application. And it's finished in size 80×80mm.

Compact Outlet

Category 6 Shielded Compact Outlet

Physical Characteristics

Premium Line compact outlet is in dedicated design for European market. With the high electrical performance as well as the high quality physical material used for inner construction and outside appearance, it provides both easy and reliable field installation as well as real long time application. And in finished size 80×80mm.

ABS, UL94 V-0

Jack

45° 8P8C RJ45 jack Plastic housing: engineering thermoplastic

CATEGORY 6 CABLING SOLUTIONS

IDC

PC, Dual 8pin IDC IDC Contacts:100μ inch nickel plated over phosphor bronze

Physical Characteristics

Electrical Characteristics

Plate

ABS, UL94 V-0

Top & Bottom Case

Zinc die casting alloys

Jack

Shielded: bronze with nickel plated

Dielectric Strength

Plastic housing: engineering thermoplastic IDC

Plate

Main body: PC, UL94 V-0 IDC Contacts:100μ inch nickel plated over phosphor bronze

Electrical Characteristics

1000V RMS for 1min

Current Rating

1.5Amp Max.

Insulation Resistance

10MΩ Min.

Contact Resistance

2mΩ per contact

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

Applications

Dielectric Strength

1000V RMS for 1min

Current Rating

1.5Amp Max.

Insulation Resistance

10MΩ Min.

Contact Resistance

2mΩ per contact

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

◎ 10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 1000BASE-TX ◎ ATM-25/ATM-51/ATM-155/100VG-AnyLan ◎ TR-4/TR-16 Active/TR16 Passive

Applications ◎ 10BASE-T, 100BASE-TX, 100BASE-T4, 1000BASE-T, 1000BASE-TX ◎ ATM-25/ATM-51/ATM-155/100VG-AnyLan ◎ TR-4/TR-16 Active/TR16 Passive

111611290 111621290

All the products are verified to the electrical characteristics required in the directive.

All the products are verified to the electrical characteristics required in the directive.

Category 6 Unshielded Compact Outlet

Category 6 Shielded Compact Outlet PART NO. 111621280 111621290

DESCRIPTION Premium Line Category 6 Shielded Compact Outlet, 80×80mm, RAL1013 Premium Line Category 6 Shielded Compact Outlet, 80×80mm, RAL9010

- C/3 -

PACKING SIZE 51×29×26.5 cm 51×29×26.5 cm

PART NO. 111611280 111611290

DESCRIPTION Premium Line Category 6 Unshielded Compact Outlet, 80×80mm, RAL1013 Premium Line Category 6 Unshielded Compact Outlet, 80×80mm, RAL9010

- C/4 -

PACKING SIZE 51×29×26.5 cm 51×29×26.5 cm

CATEGORY 6 CABLING SOLUTIONS

www.premiumline-cabling.com

Keystone Jack

Category 6 Shielded Die-Casting Keystone Jack Premium Line 180 ° shielded Die-casting Keystone Jack in special design for optimal EMI protection. Toolless design no need additional tools for termination, supports T568 A&B wiring.

Keystone Jack

Category 6 Shielded Keystone Jack Premium Line 90 ° shielded Keystone Jack is in fully shielded design, optimizes shield effectiveness protection from EMI. Dual IDC connector can accept 22-26 AWG solid cables, supports T568 A&B wiring, and it uses 110 or Krone tools for termination.

Physical Characteristics Housing: PC, UL94 V-0

Jack Contact

phosphor bronze, 50μ inch gold plated over nickel

IDC Contacts

100μ inch nickel plated over phosphor bronze

CATEGORY 6 CABLING SOLUTIONS

Body Material

Body: zinc die-casting

Premium Line Category 6 shielded Keystone Jack performance conform to ANSI/TIA-568-C.2, ISO/IEC 11801 and EN50173-1 Category 6 specifications, supports the channel link bandwidth up to 250MHz.

Electrical Characteristics Dielectric Strength

1000V RMS for 1min

Current Rating

1.5Amp Max.

Insulation Resistance

10MΩ Min.

Contact Resistance

2mΩ per contact

Physical Characteristics

Temperature Range

-10°C to 60°C

Jack

Humidity

10%~90%; non condensing

Phosphor bronze, 50μ inch gold plating over nickel in contact area

IDC

100μ inch nickel plated over phosphor

Applications

bronze

◎ 1000BASE-TX Gigabit Ethernet

Shielded Cover

50~60μ inch nickel plated over phosphor

◎ 1000BASE-T Gigabit Ethernet

bronze

◎ 100BASE-TX Fast Ethernet. ◎ 10BASE-T Ethernet.

Electrical Characteristics Dielectric Strength

1000V RMS for 1min

Current Rating

1.5Amp Max.

Insulation Resistance

10MΩ Min.

Contact Resistance

2mΩ per contact

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

106211010

◎ Voice, Video and other applications.

Applications ◎ 1000BASE-TX Gigabit Ethernet ◎ 1000BASE-T Gigabit Ethernet ◎ 100BASE-TX Fast Ethernet ◎ 10BASE-T Ethernet

106524010

◎ Voice, Video and other applications

All the products are verified to the electrical characteristics required in the directive.

All the products are verified to the electrical characteristics required in the directive.

Category 6 Shielded Die-Casting Keystone Jack

Category 6 Shielded Keystone Jack PART NO. 106211010

DESCRIPTION Premium Line Category 6 90° Shielded Keystone Jack, Dual Type IDC

- C/5 -

PACKING SIZE 53.8×35.2×27 cm

PART NO. 106524010 170252402

DESCRIPTION Premium Line Category 6 180° Shielded Die-Casting Keystone Jack Premium Line High Density Shielded Unloaded Patch Panel with Integrated Bar

- C/6 -

PACKING SIZE 53.8×35.2×27 cm 50.5×27.9×27 cm

CATEGORY 6 CABLING SOLUTIONS

www.premiumline-cabling.com

Keystone Jack

Category 6 180° Unshielded Keystone Jack Premium Line 180 ° unshielded keystone jack is in classical design, it's compatible with all Premium Line unloaded modules. The dual type IDC accepts 22-26 AWG solid cables, easy terminated with 110 or Krone tools, supports T568 A&B wiring. With its good & stable performance, this module earns the good sales result in the market.

Keystone Jack

Category 6 90° Unshielded Keystone Jack

CATEGORY 6 CABLING SOLUTIONS

Premium Line 90 ° unshielded keystone jack is in classical design, the dual type IDC accepts 22-26 AWG solid cables, easy terminated with 110 or Krone tools, supports T568 A&B wiring. With its good & stable performance, this module earns the good sales result in the market.

Physical Characteristics

Physical Characteristics Housing

PC, UL94 V-0

Jack Contact

phosphor bronze, 50μ inch gold

Housing: PC, UL94 V-0

Jack Contact

phosphor bronze, 50µ inch

IDC Contacts

100μ inch nickel plated over

Electrical Characteristics

Electrical Characteristics 1000V RMS for 1min

Current Rating

1.5Amp Max.

Insulation Resistance

10MΩ Min.

Contact Resistance

2mΩ per contact

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

100µ inch nickel plated over phosphor bronze

phosphor bronze

Dielectric Strength

106121010

gold plated over nickel

plated over nickel IDC Contacts

Body Material

Dielectric Strength

106111010

1000V RMS for 1min

Current Rating

1.5Amp Max.

Insulation Resistance

10MΩ Min.

Contact Resistance

2mΩ per contact

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

Applications

Applications

◎ 1000BASE-TX Gigabit Ethernet

◎ 1000BASE-TX Gigabit Ethernet

◎ 1000BASE-T Gigabit Ethernet

◎ 1000BASE-T Gigabit Ethernet

◎ 100BASE-TX Fast Ethernet.

◎ 100BASE-TX Fast Ethernet

◎ 10BASE-T Ethernet.

◎ 10BASE-T Ethernet

◎ Voice, Video and other applications.

◎ Voice, Video and other applications

All the products are verified to the electrical characteristics required in the directive.

All the products are verified to the electrical characteristics required in the directive.

Category 6 Unshielded Keystone Jack Category 6 Unshielded Keystone Jack PART NO. 106111010

DESCRIPTION Premium Line Category 6 90° Unshielded Keystone Jack, Dual Type IDC, White

- C/7 -

PACKING SIZE 53.8×35.2×27 cm

PART NO. 106121010 171022402

DESCRIPTION Premium Line Category 6 180° Unshielded Keystone Jack, Dual Type IDC, White Premium Line 24port High Density Unloaded Patch Panel for Unshielded Keystone Jacks, Black

- C/8 -

PACKING SIZE 53.8×35.2×27 cm 50.4×24.5×25.4 cm

CATEGORY 6 CABLING SOLUTIONS

www.premiumline-cabling.com

Keystone Jack

Category 6 90° Unshielded Slim Keystone Jack Premium Line Category 6 90 ° unshielded slim keystone jack is the mini type of standard 90 ° unshielded keystone jack as its naming. All inner construction and characteristics are same as normal one.

Keystone Jack

Category 6 Unshielded Toolless Keystone Jack

1.0”

Physical Characteristics Housing

PC, UL94 V-0

Jack Contact

phosphor bronze, 50µ inch gold plated over nickel

IDC Contacts

100µ inch nickel plated over phosphor bronze

Applications Fig.1

◎ 1000BASE-TX Gigabit Ethernet.

Fig.2

◎ 1000BASE-T Gigabit Ethernet. ◎ 100BASE-TX Fast Ethernet.

Press Down To Position

◎ 10BASE-T Ethernet.

Hook Up Press Down

Fig.3

Fig.4

Fig.5

◎ Voice, Video and other applications. 106311010

Physical Characteristics Housing

PC, UL94 V-0

Jack Contact

phosphor bronze, 50µ inch gold

IDC Contacts

100μ inch nickel plated over

Keystone Jack

Category 6 180° Unshielded Shutter Type Keystone Jack Premium Line Category 6 180 ° unshielded shutter type keystone jack is ideal design for protect jack against ingress of dirt, ease the work in field installation and future ports management. The rest is same as standard 180 ° keystone module, supports easy termination, accepts 22-26 AWG solid cables, supports T568 A&B wiring. The finish product complies with EU ROHS directive.

plated over nickel phosphor bronze

Electrical Characteristics Dielectric Strength

1000V RMS for 1min

Current Rating

1.5Amp Max.

Insulation Resistance

10MΩ Min.

Contact Resistance

2mΩ per contact

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

Physical Characteristics Housing

PC, UL94 V-0

Jack Contact

phosphor bronze, 3µ inch gold plated over nickel

IDC Contacts

100µ inch nickel plated over phosphor bronze

Applications ◎ 1000BASE-TX Gigabit Ethernet.

Applications

◎ 1000BASE-T Gigabit Ethernet.

◎ 1000BASE-TX Gigabit Ethernet 106114010

◎ 1000BASE-T Gigabit Ethernet ◎ 100BASE-TX Fast Ethernet

◎ 100BASE-TX Fast Ethernet. ◎ 10BASE-T Ethernet.

106621020

106621010

◎ Voice, Video and other applications.

◎ 10BASE-T Ethernet ◎ Voice, Video and other applications

All the products are verified to the electrical characteristics required in the directive. All the products are verified to the electrical characteristics required in the directive.

Category 6 Unshielded Keystone Jack

Category 6 Unshielded Toolless Keystone Jack PART NO. 106114010

DESCRIPTION Premium Line Category 6 Unshielded Toolless Keystone Jack, White

- C/9 -

PACKING SIZE 53.8×35.2×27 cm

PART NO. 106311010 106621010

DESCRIPTION Premium Line Category 6 90° Unshielded Slim Keystone Jack, Dual Type IDC Premium Line Category 6 180° Unshielded Shutter Keystone Jack

- C/10 -

PACKING SIZE 42.4×35.2×24 cm 62×42×43 cm

CATEGORY 6 CABLING SOLUTIONS

Premium Line Category 6 unshielded toolless keystone jack supports easy termination, accepts 22-26 AWG solid cables, supports T568 A&B wiring, termination lid ensures excellent strain relief, cable bend radius control and secure fixing.

CATEGORY 6 CABLING SOLUTIONS

www.premiumline-cabling.com

Patch Panel Category 6 1U Shielded Patch Panel

Modular Patch Panel High Density Unloaded Patch Panel

CATEGORY 6 CABLING SOLUTIONS

Premium Line unshielded compact unloaded patch panel is in dedicated design to adopt Premium Line 180° Unshielded keystone jack or 90° slim keystone jack, to meet different place use intentions. Each port has sequence numbering, plastic labeling remark and above markable position, is right to for future port identification or re-management. Main body is made of single complete steel plate, finished in 1U 19” size, suits for all standard 19” rack installation.

Premium Line Category 6 shielded Patch panel comply with ANSI/TIA-568-C.2, ISO/IEC 11801 and EN 50173-1 Class E specifications. The complete module complies with EU ROHS directive. The construction is in standard 1U 19” size, suits for all 19” rack installation. The main metal frame and rear back cover are made of SECC material, with the thickness over 1.0mm. Dual type IDC accepts 22-26 AWG solid cable, easy for termination with 110 or Krone tools. The finished product is available in black or light gray RAL7035 color. Physical Characteristics Jack

Phosphor bronze, 50µ inch gold plating over nickel in contact area

IDC

100µ inch nickel plated over phosphor bronze

Shielded Cover

50~60µ inch nickel plated over phosphor bronze

Electrical Characteristics

106621020

Dielectric Strength

1000V RMS for 1min

Current Rating

1.5Amp Max.

Insulation Resistance

10MΩ Min.

Contact Resistance

2mΩ per contact

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

Applications

171022402

◎ 1000BASE-TX Gigabit Ethernet ◎ 1000BASE-T Gigabit Ethernet ◎ 100BASE-TX Fast Ethernet ◎ 10BASE-T Ethernet ◎ Voice, Video and other applications

176212412

All the products are verified to the electrical characteristics required in the directive.

All the products are verified to the electrical characteristics required in the directive.

High Density Unloaded Patch Panel

Category 6 1U Shielded Patch Panel

PART NO. 171022402 195030002

PART NO. 176212412 176212419

DESCRIPTION PACKING SIZE Premium Line 24port High Density Unloaded Patch Panel for Unshielded Keystone Jacks, Black 50.4×24.5×25.4 cm Premium Line Cable Management Bar, Screw Type, Black 50.5×27.9×27 cm

- C/11 -

DESCRIPTION Premium Line Category 6 24port Shielded Patch Panel, Dual Type IDC, Black Premium Line Category 6 24port Shielded Patch Panel, Dual Type IDC, RAL7035

- C/12 -

PACKING SIZE 50.5×27.9×27 cm 50.5×27.9×27 cm

CATEGORY 6 CABLING SOLUTIONS

Patch Panel

www.premiumline-cabling.com

Patch Panel

Category 6 0.5U Shielded Patch Panel

Category 6 Unshielded Patch Panel

Physical Characteristics Jack

Premium line Category 6 Unshielded Patch Panel comply with ANSI/TIA-568-C.2, ISO/IEC 11801 and EN 50173-1 Class E specifications. The complete module complies with EU ROHS directive. The construction is in standard 1U 19” size, suits for all 19” rack installation. The main metal frame are made of SECC material, with the thickness over 1.0mm. Dual type IDC accepts 22-26 AWG solid cable, easy for termination with 110 or Krone tools. The finished product is available in 24 ports (1U) and 48 ports (2U).

CATEGORY 6 CABLING SOLUTIONS

Premium Line Category 6 0.5U shielded Patch panel comply with ANSI/TIA-568-C.2, ISO/IEC 11801 and EN 50173-1 Class E specifications. The complete module complies with EU ROHS directive. The construction is in standard 19” but in 0.5U size, this is the only difference from Premium Line 1U shielded patch panel on the purpose of rack space saving. The main metal frame and rear back cover made by SECC material, with the thickness over 1.0mm. Dual type IDC accepts 22-26 AWG solid cable, easy for termination with 110 or Krone tools. The finished product available in black or light gray RAL7035 color.

Phosphor bronze, 50µ inch gold plating over nickel in contact area

IDC

100µ inch nickel plated over phosphor bronze

Physical Characteristics

Shielded Cover

50~60µ inch nickel plated over phosphor bronze

Jack

Phosphor bronze, 3µ inch gold plating over nickel in contact area

IDC

100µ inch nickel plated over phosphor bronze

Electrical Characteristics 1000V RMS for 1min

Electrical Characteristics

Current Rating

1.5Amp Max.

Dielectric Strength

Insulation Resistance

10MΩ Min.

Current Rating

1.5Amp Max.

Contact Resistance

2mΩ per contact

Insulation Resistance

10MΩ Min.

Temperature Range

-10°C to 60°C

Contact Resistance

2mΩ per contact

Humidity

10%~90%; non condensing

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

Dielectric Strength

1000V RMS for 1min

Applications ◎ 1000BASE-TX Gigabit Ethernet

Applications

◎ 1000BASE-T Gigabit Ethernet

◎ 1000BASE-TX Gigabit Ethernet

◎ 100BASE-TX Fast Ethernet

◎ 1000BASE-T Gigabit Ethernet

◎ 10BASE-T Ethernet

◎ 100BASE-TX Fast Ethernet

◎ Voice, Video and other applications

◎ 10BASE-T Ethernet ◎ Voice, Video and other applications

176272412 176122412

All the products are verified to the electrical characteristics required in the directive. Category 6 Unshielded Patch Panel

All the products are verified to the electrical characteristics required in the directive. Category 6 0.5U Shielded Patch Panel PART NO. 176272412 176272419

DESCRIPTION Premium Line Category 6 24port Shielded Patch Panel, 0.5U, Dual Type IDC, Black Premium Line Category 6 24port Shielded Patch Panel, 0.5U, Dual Type IDC, RAL7035

- C/13 -

PACKING SIZE 50.5×27.9×27 cm 50.5×27.9×27 cm

PART NO. 176122412 176124812 195000002 195030002

DESCRIPTION Premium Line Category 6 24port Unshielded Patch Panel, Dual Type IDC, Black Premium Line Category 6 48port Unshielded Patch Panel, Dual Type IDC, Black Premium Line Cable Management Bar, Click On Type, Black Premium Line Cable Management Bar, Screw Type, Black

- C/14 -

PACKING SIZE 50×24.5×25.5 cm 50×24.5×25.5 cm 50.5×27.9×27 cm 50.5×27.9×27 cm

CATEGORY 6 CABLING SOLUTIONS

www.premiumline-cabling.com

Patch Cord

Category 6 S/FTP Patch Cord Premium Line Category 6 S/FTP patch cord supports the whole Category 6 channel transmission as per standard ANSI/TIA-568-C.2, ISO/IEC 11801 and EN 50173-1 Category 6 specifications. With the individual pair screen and overall tinned copper braiding protection, against the pair to pair interference, environment noise also avoid signals leak.

Patch Panel

Category 6 Labeling Holder Panel Premium line Category 6 Labeling Unshielded Patch Panel comply with TIA/EIA-568C.2, ISO/IEC 11801 and EN 50173-1 Class E specifications. The complete module complies with EU ROHS directive.

CATEGORY 6 CABLING SOLUTIONS

Physical Characteristics Jack

Phosphor bronze, 3µ inch gold plating over nickel in contact area

IDC

100µ inch nickel plated over phosphor bronze

Electrical Characteristics Dielectric Strength

1000V RMS for 1min

Current Rating

1.5Amp Max.

Insulation Resistance

10MΩ Min.

Contact Resistance

2mΩ per contact

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

AL-Mylar Insulation Sheath Braid Conductor

Applications ◎ 1000BASE-TX Gigabit Ethernet ◎ 1000BASE-T Gigabit Ethernet ◎ 100BASE-TX Fast Ethernet ◎ 10BASE-T Ethernet ◎ Voice, Video and other applications Conductor Insulation Inner-Shield Braid Sheath

176722412 All the products are verified to the electrical characteristics required in the directive.

Category 6 Labeling Holder Panel PART NO. DESCRIPTION PACKING SIZE 176722412 Premium Line Category 6 24port Unshielded Patch Panel with Labeling Holder, Dual Type IDC, Black 50×24.5×25.5 cm

- C/15 -

Material / size Construction Material Aluminum-Mylar Material Coverage Material Diameter

Category 6 S/FTP Patch Cord LENGTH GREY

Bare Copper / 26 AWG 7/0.16 ± 0.005 mm Foam-Skin PE an aluminum foil screen around each pair Tinned Copper Nom. 48% PVC / LS0H 5.7± 0.3 mm

GREEN

0.5 m 186410055 186410056 1m 186410105 186410106 2m 186410205 186410206 3m 186410305 186410306 5m 186410505 186410506 7m 186410705 186410706 10 m 186411005 186411006 Other lengths, colors or halogen free cables on request

BLUE

RED

Yellow

186410054 186410104 186410204 186410304 186410504 186410704 186411004

186410053 186410103 186410203 186410303 186410503 186410703 186411003

186410058 186410108 186410208 186410308 186410508 186410708 186411008

- C/16 -

CATEGORY 6 CABLING SOLUTIONS

www.premiumline-cabling.com

Patch Cord

Category 6 U/UTP Retail Patch Cord

Patch Cord

Category 6 U/UTP System Patch Cord

Construction Conductor Insulation Sheath

Material / size Construction Material Material Diameter

Bare Copper / 24 AWG 7/0.196 ± 0.01 mm HDPE PVC / LS0H 5.8± 0.3 mm

Category 6 U/UTP Retail Patch Cord LENGTH GREY GREEN

Insulation Jackting Conductor

0.5 m 186110055 186110056 1m 186110105 186110106 2m 186110205 186110206 3m 186110305 186110306 5m 186110505 186110506 7m 186110705 186110706 10 m 186111005 186111006 Other lengths, colors or halogen free cables on request

BLUE

RED

YELLOW

186110054 186110104 186110204 186110304 186110504 186110704 186111004

186110053 186110103 186110203 186110303 186110503 186110703 186111003

186110058 186110108 186110208 186110308 186110508 186110708 186111008

Patch Cord

Category 6 U/UTP Flat Patch Cord Premium Line Category 6 U/UTP flat patch cord is ideal design for special network installations where space is tight. It supports the whole Category 6 channel transmission as per standard ANSI/TIA-568-C.2, ISO/IEC 11801 and EN 50173-1 Class E specifications. The 32 AWG stranded conductor and flat construction easy for bending or change. Normally, the patch cord will be in TIA 568B wiring, TIA 568A or other wiring method upon request.

Construction Conductor Insulation Sheath

Material / size Construction Material Material Diameter

Category 6 U/UTP System Patch Cord LENGTH GREY

Bare Copper / 24 AWG 7/0.196 ± 0.01 mm HDPE PVC / LS0H 5.8± 0.3 mm

GREEN

0.5 m 186610055 186610056 1m 186610105 186610106 2m 186610205 186610206 3m 186610305 186610306 5m 186610505 186610506 7m 186610705 186610706 10 m 186611005 186611006 Other lengths, colors or halogen free cables on request

Construction Conductor Insulation Sheath

BLUE

RED

YELLOW

186610054 186610104 186610204 186610304 186610504 186610704 186611004

186610053 186610103 186610203 186610303 186610503 186610703 186611003

186610058 186610108 186610208 186610308 186610508 186610708 186611008

- C/17 -

Material / size Material Material Diameter

Category 6 U/UTP Flat Patch Cord LENGTH GREY

Bare Copper / 32 AWG HDPE PVC / LS0H 1.6×6.8 mm

BLACK

0.5 m 186510055 186510052 1m 186510105 186510102 2m 186510205 186510202 3m 186510305 186510302 5m 186510505 186510502 7m 186510705 186510702 10 m 186511005 186511002 Other lengths, colors or halogen free cables on request

BLUE

RED

YELLOW

186510054 186510104 186510204 186510304 186510504 186510704 186511004

186510053 186510103 186510203 186510303 186510503 186510703 186511003

186510058 186510108 186510208 186510308 186510508 186510708 186511008

- C/18 -

CATEGORY 6 CABLING SOLUTIONS

Premium Line Category 6 U/UTP System Patch Cord is designed for the high level project use. It's compatible with the patch panel, keystone jack and installation cable, constitutes excellent channel performance. Premium Line Category 6 U/UTP System Patch Cord meets and over the standard ANSI/TIA-568-C.2, ISO/IEC 11801 and EN 50173-1 Class E specification.

Premium Line Category 6 U/UTP Retail patch cord supports the whole Category 6 channel transmission as per standard ANSI/TIA-568-C.2, ISO/IEC 11801 and EN 50173-1 Class E specifications. The 24 AWG stranded conductor and flexible construction easy for bending or change. Normally, the patch cord will be in TIA 568B wiring, TIA 568A or other wiring method upon request. The patch cord is finished with snag proof boot.

CATEGORY 5e CABLING SOLUTIONS With the high speed data transmission requirement in LAN, 1998 IEEE ratified standard 802.3z defined protocol 1000BASE-T over Category 5e and higher level Ethernet cabling system. After that, with the step into 21st century, Category 5e (class D) cabling took the place of Cat.5 cabling, and it became the main trend in data cabling market.

As 1000BASE-T defines that the Cat.5e works in full-duplex mode, uses the complete 4pairs to transceive in the meantime, then this means each pair will receive the interference from other 3pairs, as well as the ground noise. Then this requires the link and components in use must be with sufficient headroom margin.

Premium Line Category 5e Cabling Solutions Installation Cable Category 5e F/UTP 100MHz Category 5e U/UTP 100MHz

Premium Line supplies complete Category 5e solutions and components, meeting and over standard ANSI/TIA 568-C.2, ISO/IEC 11801 ED.2, EN 50173-1, the Category 5e channel is guaranteed to fully support the corresponding protocols & communication services over 100m. Moreover, as a Germany brand, Premium Line provides you complete EU RoHS compliant solutions.

Category 5e U/UTP Outdoor Gel filled

Compact Outlet Category 5e Shielded Compact Outlet

Nowadays, with expansion services over Ethernet expediting, like IP phone, IP camera, security and control systems, intelligence home systems

Category 5e Unshielded Compact Outlet

and etc., these do expand the traditional Cat.5e cabling market. Also considering the future telephone system upgrading, more and more tele-

Keystone Jack

phone subsystems suggest using Cat.5e communication cable. All of these, Premium Line will always provide you adequate Category 5e solutions and warranties.

Category 5e 180°Shielded Die-Casting Keystone Jack Category 5e 90° Shielded Keystone Jack Category 5e 90° & 180° Unshielded Keystone Jack

Patch Panel Category 5e Shielded Patch Panel Category 5e Unshielded Patch Panel Category 5e Labeling Unshielded Patch Panel

Patch Cord Category 5e F/UTP Patch Cord Category 5e U/UTP System Patch Cord Category 5e U/UTP Retail Patch Cord Category 5e U/UTP Flat Patch Cord

CATEGORY 5e CABLING SOLUTIONS

www.premiumline-cabling.com

Installation Cable

Category 5e F/UTP 100MHz Standards: ◎ ISO/IEC 11801 CLASS D

205241115

Category 5e U/UTP 100MHz

◎ CENELEC EN 50173-1

Standards:

◎ CENELEC EN 50288

◎ ANSI/TIA-568-C.2

◎ flame retardancy is verified according to IEC 60332-1-2.

◎ ISO/IEC 11801 ED.2

◎ RoHS compliant

◎ CENELEC EN 50173-1

◎ 3P certified ANSI/TIA/EIA-568-B.2

◎ CENELEC EN 50288-3-1

Insulation

205141115

◎ flame retardancy is verified according to IEC 60332-1-2

Application: ◎ 1000BASE-T Gigabit Ethernet

◎ 3P certified ANSI/TIA -568-B.2

Conductor

◎ ETL certified ANSI/TIA -568-B.2

◎ 100BASE-TX Fast Ethernet

◎ RoHS compliant

◎ 10BASE-T

Drain wire

◎ Voice, ISDN

Insulation

Al-Mylar foil

Application:

Sheath

◎ 1000BASE-T Gigabit Ethernet Conductor

◎ 100BASE-TX Fast Ethernet ◎ 10BASE-T

Construction Conductor Insulation Shield Drain wire Sheath

Material / size Material Material Material Material Diameter

Bare Copper / 24AWG Foam-Skin PE Al-Mylar Type Stranded Tinned Copper PVC LS0H 6.0 ± 0.3 mm 6.0 ± 0.3 mm

Mechanical & Environmental Characteristics Bending Radius Operation Temperature Installation Temperature Storage Temperature

≥ 4D, without load ≥8D, with load -40°C~+50°C -40°C~+50°C -40°C~+50°C

Sheath

◎ Voice, ISDN

Construction Conductor Insulation

Material / size Material Material Diameter

Sheath

Bare Copper / 24AWG HDPE PVC LS0H 5.2 ± 0.2 mm 5.2 ± 0.2 mm

Electrical Performance Freq Insertion Loss (MHz) (dB) Nor. Typ. 1.0 2.0 1.8 4.0 4.1 3.7 10.0 6.5 5.8 16.0 8.2 7.4 20.0 9.3 8.3 31.25 11.7 10.5 62.5 17.0 15.1 100.0 22.0 19.3

NEXT (dB/100m) Nor. Typ. 65.3 79.3 56.3 70.3 50.3 64.3 47.3 61.1 45.8 59.3 42.9 56.7 38.4 52.1 35.3 49.2

PS NEXT (dB) Nor. Typ. 62.3 72.2 53.3 63.3 47.3 57.3 44.3 54.2 42.8 52.6 39.9 49.6 35.4 45.2 32.3 42.1

ACR (dB) Nor. Typ. 63.3 77.5 52.2 66.6 43.8 58.5 39.1 53.7 36.5 51.0 31.2 46.2 21.4 37.0 13.3 29.9

PSACR (dB) Nor. Typ. 60.3 77.5 49.2 59.6 40.8 51.5 36.1 46.8 33.5 44.6 28.2 39.1 18.4 30.1 10.3 22.8

ACR-F (dB) Nor. Typ. 63.8 84.8 51.7 72.8 43.8 64.8 39.7 60.7 37.7 58.8 33.9 54.9 27.8 48.9 23.8 44.8

PSACR-F (dB) Nor. Typ. 60.8 78.8 48.7 68.8 40.8 58.6 36.7 54.5 34.7 52.6 30.9 48.7 24.8 42.7 20.8 38.6

Return Loss (dB) Nor. Typ. 20.0 27.0 23.0 32.0 25.0 32.0 25.0 32.0 25.0 32.0 23.6 30.0 21.5 30.0 20.1 30.0

Category 5e F/UTP 100MHz PART NO. 205241115 205242115

Electrical Performance Freq Insertion Loss (MHz) (dB/100m) Nor. Typ. 1.0 2.0 1.8 4.0 4.1 3.7 10.0 6.5 6.0 16.0 8.2 7.7 20.0 9.3 8.6 31.25 11.7 10.8 62.5 17.0 15.5 100.0 22.0 19.8

NEXT (dB/100m) Nor. Typ. 65.3 77.7 56.3 68.7 50.3 60.7 47.3 56.1 45.8 55.3 42.9 52.7 38.4 48.0 35.3 44.5

PS NEXT (dB/100m) Nor. Typ. 62.3 75.2 53.3 66.0 47.3 58.3 44.3 53.7 42.8 52.9 39.9 50.0 35.4 45.5 32.3 42.2

ACR (dB/100m) Nor. Typ. 63.3 75.9 52.2 65.0 43.8 54.7 39.1 48.4 36.5 46.7 31.2 41.9 21.4 32.5 13.3 24.7

ACR-F (dB/100m) Nor. Typ. 63.8 69.2 51.7 57.5 43.8 49.0 39.7 45.6 37.7 43.6 33.9 40.1 27.8 34.7 23.8 30.4

PSACR-F (dB/100m) Nor. Typ. 60.8 68.5 48.7 57.0 40.8 48.2 36.7 43.8 34.7 42.8 30.9 39.3 24.8 33.5 20.8 29.4

Return Loss (dB/100m) Nor. Typ. 20.0 40.1 23.0 40.1 25.0 37.3 25.0 36.7 25.0 36.0 23.6 32.6 21.5 31.6 20.1 31.7

Category 5e U/UTP 100MHz

DESCRIPTION Category 5e F/UTP Installation Cable, 305m box, PVC Category 5e F/UTP Installation Cable, 305m box, LSOH

- D/1 -

PACKING SIZE 42×42×21 cm 42×42×21 cm

PART NO. 205141115 205142115

DESCRIPTION Category 5e U/UTP Installation Cable, 305m Box, PVC Category 5e U/UTP Installation Cable, 305m Box, LSOH

- D/2 -

PACKING SIZE 35×35×21 cm 35×35×21 cm

CATEGORY 5e CABLING SOLUTIONS

Installation Cable

◎ ANSI/TIA-568-C.2

CATEGORY 5e CABLING SOLUTIONS

www.premiumline-cabling.com

Installation Cable

Category 5e U/UTP Outdoor Gel Filled

Compact Outlet

Standards: ◎ ANSI/TIA-568-C.2

Category 5e Shielded Compact Outlet Premium Line compact outlet is in dedicated design for European market. With the high electrical performance also the high quality physical material used for inner construction and outside appearance, it provides both easy and reliable field installation also real long time application. And in finished size 80×80mm.

◎ CENELEC EN 50173-1 ◎ CENELEC EN 50288-3-1 ◎ RoHS compliant

725143112

Application: ◎ 1000BASE-T Gigabit Ethernet

Physical Characteristics

◎ 100BASE-TX Fast Ethernet ◎ 10BASE-T

Plate

Insulation

◎ Voice, ISDN

Gel Filling

ABS, UL94 V-0

Top & Bottom Case

Zinc die casting alloys

Jack

Shielded: bronze with nickel plated Plastic housing: engineering thermoplastic

Conductor

IDC

Main body: PC, UL94 V-0 IDC Contacts:100μ inch nickel plated over phosphor bronze

Sheath

Electrical Characteristics

Premium Line Category 5e gel filled cable is ideal design for outdoor cabling. Each conductor is made of annealed 24AWG bare copper, to guarantee the conductor elongation strength, the semi-solid gel filling around each pair, to against the water penetration and protects inner insulation from vile weather. The cable is finished with excellent PE out sheath, ensure it could endure all weather condition in temperature range -40°C ~60°C. Conductor Insulation Sheath

Material / size Material Material

Filling Gel Operation Temperature

Bare Copper / 24AWG HDPE PE NUFLEX RE-4088 -40°C to +60°C

Bending Radius Operation Temperature Installation Temperature Storage Temperature

≥ 4D, without load ≥8D, with load -40°C~+50°C -40°C~+50°C -40°C~+50°C

Electrical Performance

1.0 4.0 10.0 16.0 20.0 31.25 62.5 100.0

Insertion Loss (dB) Nor. Typ. 2.0 1.8 4.1 3.7 6.5 6.0 8.2 7.7 9.3 8.6 11.7 10.8 17.0 15.5 22.0 19.8

NEXT (dB/100m) Nor. Typ. 65.3 77.7 56.3 68.7 50.3 60.7 47.3 56.1 45.8 55.3 42.9 52.7 38.4 48.0 35.3 44.5

PS NEXT (dB) Nor. Typ. 62.3 75.2 53.3 66.0 47.3 58.3 44.3 53.7 42.8 52.9 39.9 50.0 35.4 45.5 32.3 42.2

ACR (dB) Nor. Typ. 63.3 75.9 52.2 64.9 43.8 54.5 39.1 48.3 36.5 46.5 31.2 41.6 21.4 32.2 13.3 24.2

ACR-F (dB) Nor. Typ. 63.8 69.2 51.7 57.5 43.8 49.0 39.7 45.6 37.7 43.6 33.9 40.1 27.8 34.7 23.8 30.4

PSACR-F (dB) Nor. Typ. 60.8 68.5 48.7 57.0 40.8 48.2 36.7 43.8 34.7 42.8 30.9 39.3 24.8 33.5 20.8 29.4

Return Loss (dB) Nor. Typ. 20.0 40.1 23.0 40.1 25.0 37.3 25.0 36.7 25.0 36.0 23.6 32.6 21.5 31.6 20.1 31.7

Category 5e U/UTP Outdoor Gel Filled PART NO. 725143112

1000V RMS for 1min

Current Rating

1.5Amp Max.

Insulation Resistance

10MΩ Min.

Contact Resistance

2mΩ per contact

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

Mechanical & Environmental Characteristics

Construction

Freq (MHz)

Dielectric Strength

DESCRIPTION Category 5e U/UTP Outdoor Installation Cable, Gel filled -40°C, PE, 305m Box

- D/3 -

PACKING SIZE 35×35×21 cm

Applications ◎ 10Base-T, 100Base-TX, 100Base-T4, 1000Base-T ◎ ATM-25/ATM-51/ATM-155/100VG-AnyLan ◎ TR-4/TR-16 Active/TR16 Passive

111521280

All the products are verified to the electrical characteristics required in the directive.

Category 5e Shielded Compact Outlet PART NO. 111521280 111521290

DESCRIPTION Premium Line Category 5e Shielded Compact Outlet, 80×80mm, RAL1013 Premium Line Category 5e Shielded Compact Outlet, 80×80mm, RAL9010

- D/4 -

PACKING SIZE 51×29×26.5 cm 51×29×26.5 cm

CATEGORY 5e CABLING SOLUTIONS

◎ ISO/IEC 11801 ED.2

CATEGORY 5e CABLING SOLUTIONS

www.premiumline-cabling.com

Keystone Jack

Category 5e 180° Shielded Die-Casting Keystone Jack Premium Line 180 ° shielded Die-casting Keystone Jack in special design for optimal EMI protection. Toolless design no need additional tools for termination, supports T568 A&B wiring. The finish product complies with EU RoHS directive.

Compact Outlet

Category 5e Unshielded Compact Outlet

Physical Characteristics

Premium Line compact outlet is in dedicated design for European market. With the high electrical performance also the high quality physical material used for inner construction and outside appearance, it provides both easy and reliable field installation also real long time application. And in finished size 80×80mm.

Body Material

Housing: PC, UL94 V-0 Body: zinc die-casting phosphor bronze, 3μ inch gold plated over nickel

IDC Contacts

100μ inch nickel plated over phosphor bronze

Physical Characteristics

Electrical Characteristics

Plate

ABS, UL94 V-0

Dielectric Strength

Jac

45° 8P8C RJ45 jack

Current Rating

1.5Amp Max.

Plastic housing: engineering thermoplastic

Insulation Resistance

10MΩ Min.

PC, Dual 8pin IDC

Contact Resistance

2mΩ per contact

IDC Contacts:100μ inch nickel plated over phosphor bronze

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

IDC

1000V RMS for 1min

Electrical Characteristics 1000V RMS for 1min

Applications

Current Rating

1.5Amp Max.

◎ 1000BASE-T Gigabit Ethernet

Insulation Resistance

10MΩ Min.

◎ 100BASE-TX Fast Ethernet.

Contact Resistance

2mΩ per contact

◎ 10BASE-T Ethernet.

Temperature Range

-10°C to 60°C

◎ Voice, Video and other applications.

Humidity

10%~90%; non condensing

Dielectric Strength

105524010

All the products are verified to the electrical characteristics required in the directive.

Applications

Category 5e 180° Shielded Die-casting Keystone Jack

◎ 10Base-T, 100Base-TX, 100Base-T4, 1000Base-T

PART NO. 105524010 170252402

◎ ATM-25/ATM-51/ATM-155/100VG-AnyLan ◎ TR-4/TR-16 Active/TR16 Passive

DESCRIPTION Premium Line Category 5e 180° Shielded Die-Casting Keystone Jack Premium Line High Density Shielded Unloaded Patch Panel with Integrated Bar

PACKING SIZE 53.8×35.2×27 cm 50.5×27.9×27 cm

Keystone Jack

Category 5e 90° Shielded Keystone Jack

111511290 All the products are verified to the electrical characteristics required in the directive.

105211010 All the products are verified to the electrical characteristics required in the directive.

Category 5e Unshielded Compact Outlet PART NO. 111511280 111511290

Category 5e 90° Shielded Keystone Jack

DESCRIPTION Premium Line Category 5e Unshielded Compact Outlet, 80×80mm, RAL1013 Premium Line Category 5e Unshielded Compact Outlet, 80×80mm, RAL9010

- D/5 -

PACKING SIZE 51×29×26.5 cm 51×29×26.5 cm

PART NO. 105211010 170042402

DESCRIPTION Premium Line Category 5e 90° Shielded Keystone Jack, Dual Type IDC Premium line Unloaded Patch Panel with Cable Management Bar, 24 Port, Black

- D/6 -

PACKING SIZE 53.8×35.2×27 cm 50.5×26×38 cm

CATEGORY 5e CABLING SOLUTIONS

Jack Contact

CATEGORY 5e CABLING SOLUTIONS

www.premiumline-cabling.com

Keystone Jack

Category 5e 90° Unshielded Keystone Jack

Keystone Jack

Category 5e 180° Unshielded Keystone Jack Premium Line 180 ° unshielded keystone jack is in classical design, the dual type IDC accepts 22-26 AWG solid cables, easy terminated with 110 or Krone tools, supports T568 A&B wiring. The finish product complies with EU RoHS directive. With its good & stable performance, this module earns the good sales result in the market. All the products are verified to the electrical characteristics required in the directive.

Physical Characteristics Housing

PC, UL94 V-0

Jack Contact

phosphor bronze, 50μ inch goldplated

IDC Contacts

Physical Characteristics

over nickel

Housing

PC, UL94 V-0

100μ inch nickel plated overphosphor

Jack Contact

phosphor bronze, 50μ inch goldplated

bronze

over nickel

105111010

IDC Contacts

100μ inch nickel plated overphosphor bronze

Electrical Characteristics Dielectric Strength

1000V RMS for 1min

Current Rating

1.5Amp Max.

Insulation Resistance

10MΩ Min.

Dielectric Strength

1000V RMS for 1min

Contact Resistance

2mΩ per contact

Current Rating

1.5Amp Max.

Temperature Range

-10°C to 60°C

Insulation Resistance

10MΩ Min.

Humidity

10%~90%; non condensing

Contact Resistance

2mΩ per contact

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

Electrical Characteristics

Applications ◎ 1000BASE-T Gigabit Ethernet

105121010

Applications

◎ 100BASE-TX Fast Ethernet

◎ 1000BASE-T Gigabit Ethernet

◎ 10BASE-T Ethernet

◎ 100BASE-TX Fast Ethernet

◎ Voice, Video and other applications

◎ 10BASE-T Ethernet ◎ Voice, Video and other applications

All the products are verified to the electrical characteristics required in the directive.

Category 5e 90° Unshielded Keystone Jack PART NO. 105111010

DESCRIPTION Premium Line Category 5e 90° Unshielded Keystone Jack, Dual Type IDC, White

PACKING SIZE 53.8×35.2×27 cm

Category 5e 90° Unshielded slim Keystone Jack PART NO. 105311010

DESCRIPTION PACKING SIZE Premium Line Category 5e 90° Unshielded Slim Keystone Jack, Dual Type IDC, White 53.8×35.2×27 cm

- D/7 -

All the products are verified to the electrical characteristics required in the directive.

Category 5e 180° unshielded Keystone Jack PART NO. 105121010 171022402

DESCRIPTION Packing Size Premium Line Category 5e 180° Unshielded Keystone Jack, Dual Type IDC, White 53.8×35.2×27 cm Premium Line 24port High Density Unloaded Patch Panel for Unshielded Keystone Jacks, Black 53.8×35.2×27 cm

- D/8 -

CATEGORY 5e CABLING SOLUTIONS

Premium Line 90 ° unshielded keystone jack is in classical design, the dual type IDC accepts 22-26 AWG solid cables, easy terminated with 110 or Krone tools, supports T568 A&B wiring. The finish product complies with EU RoHS directive. With its good & stable performance, this module earns the good sales result in the market. All the products are verified the electrical characteristics required in the directive.

CATEGORY 5e CABLING SOLUTIONS

www.premiumline-cabling.com

Patch Panel Category 5e Shielded Patch Panel

Physical Characteristics Jack

Phosphor bronze, 50μ inch gold plating over nickel in contact area

IDC

100μ inch nickel plated over phosphor bronze

Shielded Cover

50~60μ inch nickel plated over phosphor bronze

Category 5e Unshielded Patch Panel Premium line Cat. 5e Unshielded Patch Panel comply with ANSI/TIA-568-C.2, ISO/IEC 11801 and EN 50173-1 Class D specifications. The complete module complies with EU RoHS directive. The construction is in standard 1U 19” size, suits for all 19” rack installation. The main metal frame made by SECC material, with the thickness over 1.0mm. Dual type IDC accepts 22-26 AWG solid cable, easy for termination with 110 or Krone tools. The finished product available in 24 ports (1U) and 48 ports (2U). Physical Characteristics

Electrical Characteristics Dielectric Strength

Patch Panel

Jack

Phosphor bronze, 3μ inch gold plating over nickel in contact area

IDC

100μ inch nickel plated over phosphor bronze

1000V RMS for 1min

Current Rating

1.5Amp Max.

Insulation Resistance

10MΩ Min.

Contact Resistance

2mΩ per contact

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

Electrical Characteristics Dielectric Strength

Applications

1000V RMS for 1min

Current Rating

1.5Amp Max.

Insulation Resistance

10MΩ Min.

Contact Resistance

2mΩ per contact

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

◎ 1000BASE-T Gigabit Ethernet ◎ 100BASE-TX Fast Ethernet.

Applications

◎ 10BASE-T Ethernet.

◎ 1000BASE-T Gigabit Ethernet

◎ Voice, Video and other applications.

◎ 100BASE-TX Fast Ethernet. ◎ 10BASE-T Ethernet. ◎ Voice, Video and other applications.

175212412 175122412 All the products are verified to the electrical characteristics required in the directive.

All the products are verified to the electrical characteristics required in the directive.

Category 5e Unshielded Patch Panel

Category 5e Shielded Patch Panel, 1U

PART NO. 175122412 175124812 195000002 195030002

PART NO. 175212412 175212419

DESCRIPTION Premium Line Category 5e 24port Shielded Patch Panel, Dual Type IDC, Black Premium Line Category 5e 24port Shielded Patch Panel, Dual Type IDC, RAL7035

- D/9 -

PACKING SIZE 50.5×27.9×27 cm 50.5×27.9×27 cm

DESCRIPTION Premium Line Category 5e 24port Unshielded Patch Panel, Dual Type IDC, Black Premium Line Category 5e 48port Unshielded Patch Panel, Dual Type IDC, Black Premium Line Cable Management Bar, Click On Type, Black Premium Line Cable Management Bar, Screw Type, Black

- D/10 -

Packing Size 50×24.5×25.5 cm 50×24.5×25.5 cm 50.5×27.9×27 cm 50.5×27.9×27 cm

CATEGORY 5e CABLING SOLUTIONS

Premium Line Category 5e shielded Patch panel comply with ANSI/TIA-568-C.2, ISO/IEC 11801 and EN 50173-1 Class D specifications. The complete module complies with EU RoHS directive. The construction is in standard 1U 19” size, suits for all 19” rack installation. The main metal frame and rear back cover made by SECC material, with the thickness over 1.0mm. Dual type IDC accepts 22-26 AWG solid cable, easy for termination with 110 or Krone tools. The finished product available in black or light gray RAL7035 color.

CATEGORY 5e CABLING SOLUTIONS

www.premiumline-cabling.com

Patch Cord

Category 5e F/UTP Patch Cord

Patch Panel

Category 5e Labeling Unshielded Patch Panel Premium line Category 5e labeling unshielded patch panel comply with TIA/EIA-568C.2, ISO/IEC 11801 and EN 50173-1 Class D specifications. The complete module complies with EU RoHS directive.

Premium Line Category 5e F/UTP patch cord supports the whole channel transmission as per standard ANSI/TIA-568-C.2, ISO/IEC 11801 and EN 50173-1 Class D specifications. With overall aluminum screen protection, against the environment noise also avoid signals leak. The 26 AWG stranded conductor and flexible construction easy to bend or manage. Normally, the patch cord will be in TIA 568B wiring, TIA 568A or other wiring method upon request. The patch cord is finished with snag proof boot.

CATEGORY 5e CABLING SOLUTIONS

Applications ◎ 1000BASE-T Gigabit Ethernet ◎ 100BASE-TX Fast Ethernet.

Physical Characteristics

◎ 10BASE-T Ethernet.

Jack

Phosphor bronze, 3μ inch gold plating over nickel in contact area

◎ Voice, Video and other applications.

IDC

100μ inch nickel plated over phosphor bronze

Electrical Characteristics

Insulation

Dielectric Strength

1000V RMS for 1min

Current Rating

1.5Amp Max.

Insulation Resistance

10MΩ Min.

Contact Resistance

2mΩ per contact

Temperature Range

-10°C to 60°C

Humidity

10%~90%; non condensing

Sheath Al-Mylar foil Conductor Drain Wire

Applications ◎ 1000BASE-T Gigabit Ethernet ◎ 100BASE-TX Fast Ethernet. ◎ 10BASE-T Ethernet. ◎ Voice, Video and other applications.

Construction Conductor 175722412

Insulation Inner-Shield Drain Wire Sheath

Material / size Construction Material Aluminum-Mylar Material Material Diameter

Category 5e SF/UTP Patch Cord LENGTH GREY

All the products are verified to the electrical characteristics required in the directive.

Category 5e Labeling Unshielded Patch Panel PART NO. DESCRIPTION PACKING SIZE 175722412 Premium Line Category 5e 24 port Unshielded Patch Panel with Labeling Holder, dual type IDC, Black 50×24.5×25.5 cm

- D/11 -

0.5 m 185210055 1m 185210105 2m 185210205 3m 185210305 5m 185210505 7m 185210705 10 m 185211005 15 m 185211505 20 m 185212005 Other lengths, colors or halogen free on request.

Bare Copper / 26AWG 7/0.16 ± 0.005 mm Foam-Skin PE an aluminum foil screen over all pairs Stranded Tinned Copper PVC LSOH 5.6± 0.3 mm 5.6 ± 0.3 mm

GREEN

BLUE

RED

YELLOW

185210056 185210106 185210206 185210306 185210506 185210706 185211006 185211506 185212006

185210054 185210104 185210204 185210304 185210504 185210704 185211004 185211504 185212004

185210053 185210103 185210203 185210303 185210503 185210703 185211003 185211503 185212003

185210058 185210108 185210208 185210308 185210508 185210708 185211008 185211508 185212008

- D/12 -

CATEGORY 5e CABLING SOLUTIONS

www.premiumline-cabling.com

Patch Cord

Category 5e U/UTP Retail Patch Cord Premium Line Category 5e U/UTP patch cord supports the whole channel transmission as per standard ANSI/TIA-568-C.2, ISO/IEC 11801 and EN 50173-1 Class D specifications. The 26 AWG stranded CCA conductor and flexible construction easy for bending or change. Normally, the patch cord will be in TIA 568B wiring, TIA 568A or other wiring method upon request. The patch cord is finished with snag proof boot.

Patch Cord

Category 5e U/UTP System Patch Cord

Construction

Applications

Category 5e U/UTP Retail Patch Cord LENGTH GREY GREEN

◎ 1000BASE-T Gigabit Ethernet

Conductor Insulation Sheath

Material / size Construction Material Material Diameter

Copper coated Aluminum / 26AWG 7/0.16 ± 0.01 mm HDPE PVC LSOH 5.3 ± 0.3 mm 5.3 ± 0.3 mm

0,5 m 185710055 185710056 1m 185710105 185710106 2m 185710205 185710206 3m 185710305 185710306 5m 185710505 185710506 7m 185710705 185710706 10 m 185711005 185711006 15 m 185711505 185711506 20 m 185712005 185712006 Other lengths, colors or halogen free on request.

◎ 100BASE-TX Fast Ethernet. ◎ 10BASE-T Ethernet. ◎ Voice, Video and other applications.

BLUE

RED

YELLOW

185710054 185710104 185710204 185710304 185710504 185710704 185711004 185711504 185712004

185710053 185710103 185710203 185710303 185710503 185710703 185711003 185711503 185712003

185710058 185710108 185710208 185710308 185710508 185710708 185711008 185711508 185712008

Patch Cord

Conductor

Category 5e U/UTP Flat Patch Cord Premium Line Category 5e U/UTP flat patch cord is ideal design for special network installations where space is tight. It supports the whole Cat.5e channel transmission as per standard ANSI/TIA-568-C.2, ISO/IEC 11801 and EN 50173-1 Class D specifications. The 30 AWG stranded conductor and flat construction easy for bending or change. Normally, the patch cord will be in TIA 568B wiring, TIA 568A or other wiring method upon request.

Insulation

Sheath

Applications ◎ 1000BASE-T Gigabit Ethernet ◎ 100BASE-TX Fast Ethernet.

Construction Conductor Insulation Sheath

Material / size Construction Material Material Diameter

Category 5e U/UTP System Patch Cord LENGTH GREY 0.5 m 185110055 1m 185110105 2m 185110205 3m 185110305 5m 185110505 7m 185110705 10 m 185111005 15 m 185111505 20 m 185112005 Other lengths, colors or halogen free on request.

◎ 10BASE-T Ethernet.

Bare Copper / 26AWG 7/0.16 ± 0.01 mm HDPE PVC LSOH 5.3 ± 0.3 mm 5.3 ± 0.3 mm

◎ Voice, Video and other applications.

Construction Conductor Insulation

GREEN

BLUE

RED

YELLOW

185110056 185110106 185110206 185110306 185110506 185110706 185111006 185111506 185112006

185110054 185110104 185110204 185110304 185110504 185110704 185111004 185111504 185112004

185110053 185110103 185110203 185110303 185110503 185110703 185111003 185111503 185112003

185110058 185110108 185110208 185110308 185110508 185110708 185111008 185111508 185112008

- D/13 -

Sheath

Material / size Material Material Diameter

Category 5e U/UTP Flat Patch Cord LENGTH GREY

Bare Copper / 30 AWG HDPE PVC LSOH 1.6 mm × 6.8 mm 1.6 mm × 6.8 mm

BLACK

0.5 m 185510055 185510052 1m 185510105 185510102 2m 185510205 185510202 3m 185510305 185510302 5m 185510505 185510502 7m 185510705 185510702 10 m 185511005 185511002 Other lengths, colors or halogen free cables on request

BLUE

RED

YELLOW

185510054 185510104 185510204 185510304 185510504 185510704 185511004

185510053 185510103 185510203 185510303 185510503 185510703 185511003

185510058 185510108 185510208 185510308 185510508 185510708 185511008

- D/14 -

CATEGORY 5e CABLING SOLUTIONS

Premium Line Category 5e U/UTP System Patch Cord is design for the high level project use. Be compatible with the patch panel, keystone jack and installation cable, to constitute excellent channel performance. Premium Line Category 5e U/UTP System Patch Cord meets and over the standard ANSI/TIA-568-C.2, ISO/IEC 11801 and EN 50173-1 Class D specification.

Navigator Patch System The patented Navigator Patch System technology is embedded to a regular patch panel to keep the price reasonable. The build in LEDs allow the identification of the cable connection to the workstations quickly and accurately without interfering the network performance. Time-consuming one by one checking with hard to hear tone generators is a thing of the past. Finding the right cable for adds, moves or changes is as easy as turning on a light.

Premium Line Navigator Patch System Navigator Patch System Unshielded Navigator Patch Panel Shielded Navigator Patch Panel 45° Unshielded Navigator Patch Panel with Labeling Holder Transmitter

High Efficiency

The horizontal cable installation and patch cord connection are the most time-consuming processes. With Navigator Patch Panel, operators don't have to check the complicated drawing and label patch cords and panels. Navigator Patch Panel can greatly improve the installation efficiency.

Debugging

You can find out the failure by LED display simply, don't need to check the drawing. To maintain the cabling system become easily.

Security

Random port installation and no labeling are helpful to Information security management. Comply with BS 7799 or ISO 27001 standard.

Choice of Wise

There is no competitive product to the Navigator Patch System. The difference makes you win the project.

Economical Solution

1. Saving the installation time and labor cost 2. No need dedicated staff to operate 3. Visualized LED indication, Easily problem determination 4. NO additional cost for software, device or system upgrade

Navigator Patch System

www.premiumline-cabling.com

Navigator Patch System Unshielded Navigator Patch Panel

175522412

Navigator Patch System

Unshielded Navigator Patch Panel

Using tone generators you may be forced to separate bundled cables due to weak signal. The Navigator Patch System keeps your cabinet neat. Simply connect the signal transmitter to the outlet to find the opposite position at the patch panel.

PART NO. 175522412 176522412 175322412 176322412

DESCRIPTION Premium Line Category 5e Unshielded Navigator Patch Panel, Dual Type IDC, 24 Ports, Black Premium Line Category 6 Unshielded Navigator Patch Panel, Dual Type IDC, 24 Ports, Black Premium Line Category 5e Unshielded Navigator Patch Panel with Labeling Holder, Dual Type IDC, 24 Ports, Black Premium Line Category 6 Unshielded Navigator Patch Panel with Labeling Holder, Dual Type IDC, 24 Ports, Black

outlet connected to the network equipment

175612412

LED Green light on: Outlet is not connected to the network equipment. Shielded Navigator Patch Panel

LED light off: No connection between patch panel and outlet on pair 3-6.

PART NO. DESCRIPTION 175612412 Premium Line Category 5e Shielded Navigator Patch Panel, Dual Type IDC, 24 Ports, Black 176612412 Premium Line Category 6 Shielded Navigator Patch Panel, Dual Type IDC, 24 Ports, Black RAL 7035 on request

Features 175362412

1. Performance conforms to ANSI/TIA-568-C.2, ISO/IEC 11801 and EN 50173-1 Category 5e and 6 specifications. 2. Supports T568 A&B Wiring & Easy installation. 3. Terminate using 110 or Krone tools.

45° Unshielded Navigator Patch Panel with Labeling Holder

4. Backward compatible to Category 5e, 5, and 3. 5. IDC connector can accept 22-26 AWG solid and stranded cables.

PART NO. DESCRIPTION 175362412 Premium Line Category 5e 45° Unshielded Navigator Patch Panel with Labeling Holder, Dual Type IDC, 24 Ports, Black 176612412 Premium Line Category 6 45° Unshielded Navigator Patch Panel with Labeling Holder, Dual Type IDC, 24 Ports, Black

Approval ◎ ETL verified to ANSI/TIA-568-B.2-1 Permanent Link. ◎ ETL verified channel to ANSI/TIA-568-B.2 Category 5e.

Application ◎ 1000BASE-TX Gigabit Ethernet ◎ 100BASE-TX Fast Ethernet ◎ 10BASE-TX Ethernet

194800000

Transmitter

PART NO. DESCRIPTION 194800000 Premium Line Signal Transmitter for Navigator Patch Panel

◎ Voice, Video and other application

- E/1 -

- E/2 -

Navigator Patch System

LED Red light on:

VOICE & DATA PRODUCT SERIES Premium Line Voice & data product series mainly focus on classical voice cabling, including multipair cables- available for indoor backbone cabling & outdoor campus cabling, 110 series cross connect and accessories, LSA module and modular distribution boxes, standard RJ45 Category 3 voice and data patch panels, patch cords and installation cables, to constitute a complete voice cabling solution.

Premium Line Voice & Data Product Series Multipair Cable Category 3 & 5 U/UTP Indoor Multipair Cable Category 3 U/UTP Outdoor Gel Filled Multipair Cable

Patch Panel Category 3 Unshielded Patch Panel

110 Cross Connect Rack Mounted Wiring Block Cable Management 110 Connector

Multipair Cables

110 Plug

Premium Line mainly supply Category 3 and Category 5 multipair cables, normally core number could be 5pairs, 10pairs, 25pairs, 50pairs, 100pairs,

110 Patch Cord

including both indoor and outdoor gel filled type, for indoor backbone use and campus cabling application.

LSA Module

All multipair cable meet or exceed ANSI/TIA/EIA 568A, ISO/IEC 11801, EN 50173 specification.

Connection Module Distribution Box

ISDN Patch panels Standard RJ45 jack, and 19” 1U/2U size, provides 25ports/50ports options, suit for rack installation.

110 Series Products Premium Line provides with/without legs, and rack mounted type 110 wiring block for various mounting options. Terminate with 4 or 5 pairs connectors, 110 patch cords and Cat.5e 4pairs twisted installation cables, to constitute a up to 100MHz channel for data & voice transmission.

LSA Module Premium Line provides 10pairs connection/disconnection & earth module, with the function over voltage and/or grounding protection. Apply to multifunction MDF or distribution box. The LSA modular distribution box exist 2 types available for indoor voice distribution and outdoor application. The outdoor distribution box normally made by special treated ABS material, anti-UV curing, and also with excellent water proof grade IP45, to against outdoor severe weather.

VOICE & DATA PRODUCT SERIES

www.premiumline-cabling.com

All Premium Line Category 3 UTP multi-pairs installation cable meet or exceed ANSI/TIA/EIA 568A, ISO/IEC 11801, EN 50173 specification. This range of unscreened cables is designed to support Category 3 Link and Channel performance, with internationally defined Physical and Electrical performance up to 16MHz. all cable comply with RoHS.

Multipair Cable

Category 3 U/UTP Outdoor Gel Filled Multipair cable

203191225

Sheath Pet Tape

Sheath Pet Tape

Insulation

Insulation

Copper

Copper

ID Tape Pair

Pair

Sheath

723163222

Pet Tape Insulation ID Tape

Conductor

Copper

Insulation

Pair

Wrapping Jelly Compound Ripcord LDPE Sheath

Construction Conductor Insulation Sheath

24 AWG Soft Plain Copper Polyethylene with color marking on Primary cores to ease identification PVC 5 Pairs 25 Pairs 50 Pairs 100 Pairs 5.7±0.3mm 11.5+/-1.0mm 15.0+/-2.0mm 25.0+/-2.0mm

Electrical Performance Transmission Frequency (MHz) NEXT dB/100m Characteristic Impedance Attenuation dB/100m Structural Return Loss dB/100m Nominal Velocity of Propagation

1 4 8 10 16 41.3 32.3 27.8 26.3 23.3 100 +/- 15 2.6 5.6 8.5 9.7 13.1 12 12 12 12 9.95 >65%

Bending Radius Operation Temperature Installation Temperature Storage Temperature

DESCRIPTION Premium Line Category 3 U/UTP Multipair Cable, 5 pairs, 500 m reels, PVC Premium Line Category 3 U/UTP Multipair Cable, 25 pairs, 500 m reels, PVC Premium Line Category 3 U/UTP Multipair Cable, 50 pairs, 500 m reels, PVC Premium Line Category 3 U/UTP Multipair Cable, 100 pairs, 500 m reels, PVC

Category 5 U/UTP Indoor Multipair Cable PART NO. 201181225 201191225

DESCRIPTION Premium Line Category 5 U/UTP Multipair Cable, 25 pairs, 500 m reels, PVC Premium Line Category 5 U/UTP Multipair Cable, 50 pairs, 500 m reels, PVC

- F/1 -

Bending Radius Operation Temperature Installation Temperature Storage Temperature

≥ 10D, without load ≥15D, with load -40°C~+50°C -40°C~+50°C -40°C~+50°C

Mechanical & Environmental Characteristics

Category 3 U/UTP Indoor Multipair Cable PART NO. 203161225 203181225 203191225 203111225

Mechanical & Environmental Characteristics

≥ 10D, without load ≥15D, with load 0°C~+50°C -10°C~+50°C -20°C~+50°C

Construction Conductor Insulation Filling Compound

0.63±0.005MM Plain copper conductor HDPE with color marking on Primary cores to ease identification Petroleum Jelly Filled Compound LDPE Sheath 25 Pair 50 Pair 100 Pair Nominal size 13.8 18.2 23.5 Additional Components Overall Cable wrapped with PP tape Operating Temperature -40°C~ +60°C Installation Temperature -30°C~ +50°C

Category 3 U/UTP Outdoor Gel Filled Multipair Cable PART NO. 723163222 723183222 723193222

DESCRIPTION Premium Line Category 3 U/UTP Multipair Cable, 25 pairs, Outdoor Gel Filled, 500 m reels, PE Premium Line Category 3 U/UTP Multipair Cable, 50 pairs, Outdoor Gel Filled, 500 m reels, PE Premium Line Category 3 U/UTP Multipair Cable, 100 pairs, Outdoor Gel Filled, 500 m reels, PE

- F/2 -

VOICE & DATA PRODUCT SERIES

Multipair Cable

Category 3 U/UTP Indoor Multipair Cable

VOICE & DATA PRODUCT SERIES

www.premiumline-cabling.com

Rack Mounted Wiring Blocks

110 Wiring Blocks With or Without Legs

271310070

271110070

Patch Panel Category 3 Unshielded Patch Panel

110 Cross Connect

Physical Characteristics:

Rack Mounted Wiring Block

◎ Jack: Phosphor bronze, 3μ inch gold plating over nickel in contact area ◎ IDC : 30μ inch phosphor bronze or tin plated over nickel

Wiring blocks are designed to support voice and high speed data application, which can meets up to Category 5e level data transmission with other equivalent components support. Normally it’ s used as cross connects or consolidation point, as it’ s the economical solutions in a number of different configurations for specific connectivity applications.

Application: ◎ 10BASE-T Ethernet ◎ Supports all voice systems

Features: ◎ Exclusively deeper channel to facilitate cabling installations ◎ Ideal for use in cross connects and consolidation point applications  ◎ Meets Cat.5e requirements to support high speed data & voice transmission ◎ RoHS compliant

Physical Characteristics: ◎ Wiring Strips: PC UL94V-0, Color: Ivory ◎ Panel: SPCC steel, Color: black

173112519

◎ Dimension: 19 inch,1U ◎ Admissible Conductor: 22~26AWG

Rack Mounted Wiring Blocks Category 3 Unshielded Patch Panel PART NO. 173112519 173115019 173112512 173115012

DESCRIPTION Premium Line ISDN (Category 3) 90 ° Unshielded Patch Panel, Dual Type IDC, 25 ports, RAL7035 Premium Line ISDN (Category 3) 90 ° Unshielded Patch Panel, Dual Type IDC, 50 ports, RAL7035 Premium Line ISDN (Category 3) 90 ° Unshielded Patch Panel, Dual Type IDC, 25 ports, Black Premium Line ISDN (Category 3) 90 ° Unshielded Patch Panel, Dual Type IDC, 50 ports, Black

- F/3 -

Packing Size 50.5×27.9×27 cm 50.5×27.9×27 cm 50.5×27.9×27 cm 50.5×27.9×27 cm

PART NO. 271310070 271320070 271105070 271110070 271205070 271210070

DESCRIPTION Premium Line 110 Rack Mounted Wiring Blocks, 100 pairs, Ivory Premium Line 110 Rack Mounted Wiring Blocks, 200 pairs, Ivory Premium Line 110 Wiring Blocks with Legs, 50 pairs, Ivory Premium Line 110 Wiring Blocks with Legs, 100 pairs, Ivory Premium Line 110 Wiring Blocks without Legs, 50 pairs, Ivory Premium Line 110 Wiring Blocks without Legs, 100 pairs, Ivory

- F/4 -

Packing Size 51.1×31.5×32 cm 51.1×31.5×32 cm 49.5×39.5×34.5 cm 49.5×39.5×34.5 cm 49.5×39.5×34.5 cm 49.5×39.5×34.5 cm

VOICE & DATA PRODUCT SERIES

Premium Line Category 3 unshielded patch panel comply with ANSI/TIA/EIA 568A, ISO/IEC 11801, EN 50173 specifications. The complete module complies with EU RoHS directive. The construction is in standard 1U 19” size, suits for all 19” rack installation. The main metal frame and rear back cover made by SECC material, with the thickness over 1.0mm. 4P4C terminal block for 25ports, and 8P8C for 50ports type. The finished product available in black or light gray RAL7035 color.

VOICE & DATA PRODUCT SERIES

www.premiumline-cabling.com

110 Cross Connect 110 Plug Features: ◎ Contains two piece, snap together housing

281400000

◎ Sturdy, reinforced design to hold up under punch down termination ◎ Ergonomically styled for easy handling. ◎ Polarized to prevent reverse installation to connector block ◎ 4 pair plug terminated with corresponding components meets Cat.5e application

110 Cross Connect

◎ RoHS compliant

Cable Management

Construction:

281100000

◎ Contactor: 3μ inch gold platingz ◎ Admissible Conductor: 22-26AWG

281200000

110 Plug PART NO. 281100000 281200000 281400000

PACKING SIZE 48.5×36.1×43.6 cm 48.5×36.1×43.6 cm 48.5×36.1×43.6 cm

272300070

272100070

110 Cross Connect

Cable Management PART NO. 272300070 272100070 272200070

DESCRIPTION Premium Line 110 Patch Plug, 1 pair Premium Line 110 Patch Plug, 2 pair Premium Line 110 Patch Plug, 4 pair

110 Patch Cord

DESCRIPTION Premium Line 110 Rack Mounted Cable Management, Ivory Premium-Line 110 Cable Management with Legs, Ivory Premium Line 110 Cable Management without Legs, Ivory

Features: ◎ Cable performance conforms to TIA/EIA-568B.2, ISO/IEC 11801 and EN50173 Category 5E specification, TIA/EIA Bulletin TSB95 for wire Requirements. ◎ Comply with standard wiring configuration TIA/EIA568B ◎ RoHS compliant.

110 Cross Connect

Construction:

110 Connector

◎ 110 Connector:PC UL94 V-0, 3μ-inch gold plating over contact area 1pair, 273500470

Features:

◎ Conductor: Bare Copper 24AWG

◎ High-quality connecting blocks securely seat the wire on 110 wiring bases.

◎ Insulation: HDPE

◎ Meets Cat.5e requirements to support high speed data & voice transmission

◎ Sheath: PVC or LSOH assorted on request

◎ For standard UTP cable.

◎ Diameter: 5.3 ± 0.3 mm

◎ Color printed for easy identification. ◎ RoHS compliant.

110 Patch Cord

Construction:

LENGTH

◎ Connecting Block: PC UL94V-0, Color: Ivory ◎ IDC Contact Material: 100μ inch nickel plated over phosphor bronze

273500570

1m

◎ Admissible Conductor: 22-26AWG 2m

110 Connector PART NO. 273500470 273500570

282410108

2pair, 4 pair upon request

DESCRIPTION Premium Line 110 Wiring Connector, 4 pair, Ivory Premium Line 110 Wiring Connector, 5 pair, Ivory

- F/5 -

PACKING SIZE 48×40×20.5 cm 48×40×20.5 cm

5m

GREY 282110105 282210105 282410105 282110205 282210205 282410205 282110505 282210505 282410505

RED 282110103 282210103 282410103 282110203 282210203 282410203 282110503 282210503 282410503

Other length, colors, or RJ45 to 110 plug patch cord on request.

- F/6 -

BLUE 282110104 282210104 282410104 282110204 282210204 282410204 282110504 282210504 282410504

PAIR 1 Pair 2 Pair 4 Pair 1 Pair 2 Pair 4 Pair 1 Pair 2 Pair 4 Pair

VOICE & DATA PRODUCT SERIES

◎ Material: PC, UL94 V-0

VOICE & DATA PRODUCT SERIES

www.premiumline-cabling.com

LSA Module Connection Module

LSA Module Distribution Box

Indoor Distribution Box ◎ Easy lockable design ◎ ABS material box, light weight ◎ 50 pairs or 100 pairs for branch distribution ◎ 50 pairs, 190×205×105mm ◎ 100 pairs, 275×205×105mm

131110007

131110005

138050000

Outdoor Distribution Box ◎ IP45 water proof design ◎ UV cured ABS box for outdoor use ◎ 50 pairs, 195×195×95mm ◎ 100 pairs, 350×190×95mm 139412009

Features: ◎ The connection module with connect feature provides an economical and high-density solution for horizontal or backbone voice and low speed data applications. ◎ Parallel tap on the front measuring and testing connection modules have one piece contact providing a continuous link between permanent wiring and jumper wiring, giving provision for Monitoring access & over voltage. ◎ Earth module for connecting drain wires to an earth contact without soldering, wire-stripping or the use of screws.

LSA Module PART NO. 131110001 131310001 131210001 139412009

137050000

Distribution Box DESCRIPTION Premium Line 10 Pairs Connection Module, White Premium Line 10 Pairs Earth Module, White Premium Line 10 Pairs Disconnection Module, White Premium Line Rack Mounted Modular Block,150 Pairs, 3U

- F/7 -

PART NO. 138050000 138011000 137050000 137011000

DESCRIPTION Premium Line 50 Pairs Indoor Distribution Box Premium Line 100 Pairs Indoor Distribution Box Premium Line 50 Pairs Outdoor Distribution Box Premium Line 100 Pairs Outdoor Distribution Box

- F/8 -

VOICE & DATA PRODUCT SERIES

Premium Line offer both indoor & outdoor LSA Modular distribution box, for different application purpose use.

Tools & Accessories Premium Line Tools & Accessories

Tool Impact Punch Down Tool Cutting, Crimping & Striping Tool

Faceplate 86 Type Faceplate Series Back Box 80×80 Type Faceplate Series 70 Type Faceplate Series

T- Adapter In-line Coupler Junction Box Toolless RJ45 Plug

Premium Line has a wide range of LAN tools including Impact Punch Down Tool,Crimping Tool,Striping Tool and Cutting Tool which are used for network installation and maintenance ,also the Tools are suitable for terminal blocks such as Krone ,110 and Dual type ,special-design with wire hook removes the terminal conductor can make your installation easy and ergonomics of the handles enables the installer comfortable work. Besides, with Premium Line various types faceplate in popular design over the worldwide market, and also other types accessories, like splitter, in-line coupler, junction box and toolless RJ45 plug, it is capable to supply all key components which you may need for complete project beyond solutions, and save your time.

Tools & Accessories www.premiumline-cabling.com

Tool

Impact Punch Down Tool Premium Line highest quality tools are efficient for more precise, consistent terminations and are automatically triggered with a simple push. The spring loaded mechanism triggers the blade providing just the right amount of impact to proper wire seat and/or cut. The tools are useful either for 110 or Krone termination. Some tools have changeable plate system. Each Premium Line tools is manufactured to comply with the highest European standards and quality requirements.

Tool

Cutting, Crimping & Striping Tool These tools are suitable for plant maintenance, field service or LAN installation. All tools are full-cycle, compound leverage and triple ratchet. Their frame is made of the European high-grade, stamped hardened steel. Special design and

141213000

142386410

141312000

142286000

141211000

142180000

143200000 190000003

Impact Punch Down Tool

Cutting, Crimping & Striping Tool

PART NO. 141213000 141211000 141312000 190000003

PART NO. 142180000 142286000 142386410 143200000

DESCRIPTION Impact Punch Down Tool Use On 110 Terminal Block Impact Punch Down Tool Use On Krone Terminal Block Krone Type Impact Punch Down Tools Keystone Jack Support Tool for Termination, Red

- G/1 -

DESCRIPTION Modular Plug Crimps, Strip and Cut Tool Use On 8P8C/RJ45 Plug Modular Tool for Cutting-Stripping & Crimping Use On 6P & 8P plug Professional 3 In One Modular Crimping Tool with Ratchet release Universal Stripping Tool

- G/2 -

Tools & Accessories

ergonomics of the handles enables the installer easy and comfortable work.

Tools & Accessories www.premiumline-cabling.com

Faceplate

86 Type Faceplate Series

Faceplate

Features:

80×80 Type Faceplate Series

◎ Secures to any surface, drywall, baseboard, and even modular furniture ◎ 100% compatible with standard wall(face ) plates ◎ Keystone jacks can be snapped in and out easily ◎ Comes in models to accommodate 1/2/3/4 inserts and shuttered dust cover ◎ Comes with hidden mounting screws and clear outlet ID labels ◎ Apply UL-94V-0 high-impact, fire-retardant ABS resin

121522210

Tools & Accessories

121521210

121900290

80×80 Type Faceplate Series

121121210

121112210

121211210

121212210

PART NO. 125134010 125154010 125100210 121521210 121522210 121900290

DESCRIPTION 1-port Keystone Module, 45×45mm, French style, white 1-port Keystone Module, 22.5×45mm, French style, white French Style face plate frame, 80×80, white French Style face plate, Bevel, 90°Entry, 80×80,Snap-In,w/-shutter,1-port, white French Style face plate, Bevel, 90°Entry, 80×80,Snap-In,w/-shutter,2-port, white French Style face plate, w/metal Frame, Bevel, 80×80, Snap-In, RAL9010

86 Type Faceplate Series PART NO. 121111210 121112210 121121210 121122210 121314210 121324210 121211210 121212210 121221210 121222210 121414210 121424210

DESCRIPTION Euro II Face Plate, Right-angle, 45°Entry, 86×86,Snap-In,w/-Shutter,1-port, White Euro II Face Plate, Right-angle, 45°Entry, 86×86,Snap-In,w/-Shutter,2-port, White Euro II Face Plate, Right-angle, 90°Entry, 86×86,Snap-In,w/-Shutter,1-port, White Euro II Face Plate, Right-angle, 90°Entry, 86×86,Snap-In,w/-Shutter,2-port, White Euro II Face Plate, Right-angle, 45°Entry, 86×146,Snap-In,w/-Shutter,4-port, White Euro II Face Plate, Right-angle, 90°Entry, 86×146,Snap-In,w/-Shutter,4-port, White Euro III Face Plate, Bevel, 45°Entry, 86×86,Snap-In,w/-Shutter,1-port, White Euro III Face Plate, Bevel, 45°Entry, 86×86,Snap-In,w/-Shutter,2-port, White Euro III Face Plate, Bevel, 90°Entry, 86×86,Snap-In,w/-Shutter,1-port, White Euro III Face Plate, Bevel, 90°Entry, 86×86,Snap-In,w/-Shutter,2-port, White Euro III Face Plate, Bevel, 45°Entry, 86×146,Snap-In,w/-Shutter,4-port, White Euro III Face Plate, Bevel, 90°Entry, 86×146,Snap-In,w/-Shutter,4-port, White

Faceplate

70 Type Faceplate Series

121822010

121823010

121824010

121826010

Faceplate Back Box

70 Type Faceplate Series

Features:

PART NO. 121820010 121821010 121822010 121823010 121824010 121826010 127110010 127210010

◎ The back box is designed for mounting into a wall, floor or other flat surface. ◎ Each unit includes screws and double-sided tape for mounting, rubber-door and cable tie for cable.

Back Box PART NO. 112005090 112006090

DESCRIPTION Wall Mounted Back Box, 86×86×35, White Wall Mounted Back Box, 86×146×35, White

- G/3 -

112005090

DESCRIPTION USA III Blank Face Plate, 70×115, White USA III Face Plate, 90°Entry,70×115,Integral Molding,w/o Icon,1-port, White USA III Face Plate, 90°Entry,70×115,Integral Molding,w/o Icon,2-port, White USA III Face Plate, 90°Entry,70×115,Integral Molding,w/o Icon,3-port, White USA III Face Plate, 90°Entry,70×115,Integral Molding,w/o Icon,4-port, White USA III Face Plate, 90°Entry,70×115,Integral Molding,w/o Icon,6-port, White Fiber Optic SC Type Support Module Fiber Optic ST Type Support Module

- G/4 -

127110010 127210010

Tools & Accessories www.premiumline-cabling.com

Junction Box Junction Box offers punch down IDC termination types which provides a feed-through connection. The Junction Box provides an easy way to connect two patch cables. Features: ◎ Join two category 5e/6(or lower ) cables

T- Adapter

◎ Dual type IDC punch down terminals

192620000

◎ Unshielded and Shielded box with cable tie

Premium Line “T” adapters of printed circuit design provide high performance (meet cat.3 transmission requirement ) and flexibility in different wiring application . “T” adapter converts an RJ45 8 position plug with 0.5ft round cable into two RJ45 8 position jacks at different wiring. Adapters are available as “Splitters” which convert one 4-pair jack into two 2-pair jack into one 1-pair and 3-pair jack.

◎ Double-stick tape or screw mounting included ◎ Extend Category 5e/6 cable without loosing Category 5e/6 performance ◎ PCB design for maximum reliability

Specifications: Junction Box

◎ Plug: RJ45 8P8C ◎ Jack: RJ45 8P8C ◎ Dimension: L 4.1 cm×W 4.7 cm×H 2.1 cm 193021210

PART NO. 192510001 192520000 192610001 192620000

DESCRIPTION Category 5e Unshielded In-line Coupler, Block Type (Junction Box), Dual Type IDC, white Category 5e Shielded In-line Coupler, Block Type (Junction Box), Dual Type IDC Category 6 Unshielded In-line Coupler, Block Type (Junction Box), Dual Type IDC, white Category 6 Shielded In-line Coupler, Block Type (Junction Box), Dual Type IDC

193011211

T- Adapter PART NO. 193011211 193011111 193012211 193021210 193021110 193022210

Toolless RJ45 Plug

DESCRIPTION T-Adapter for Splitting 4-pair Outlet to One 10Base-T and One Telephone Outlet, White T-Adapter for Splitting 4-pair Outlet to Two 10Base-T Outlets, White T-Adapter for Splitting 4-pair Outlet to Two Telephone Outlets, White T-Adapter for Splitting 4-pair Outlet to One 10Base-T and One Tel. Outlet, Shielded T-Adapter for Splitting 4-pair Outlet to Two 10Base-T Outlets, Shielded T-Adapter for Splitting 4-pair Outlet to Two Telephone Outlets, Shielded

Toolless modular plug are special designed for industrial applications, and also be an ideal solution of creating customized lengths of modular network cables. The modular plugs are manufactured from high-impact clear polycarbonate to withstand everyday wear and tear. You can expect error-free data transfers.

In-line Coupler Our Category 5e In-line coupler is ideal to used to link an exit network cable run or to simply extend your patch cables. They are capable of handling LAN speeds of up to 1000Mbs. The coupler meet TIA/EIA 568A and ISO/IEC DIS 11801 Category 5e specification, and is Cat 5e & Power Sum certified. They are available in either shielded or unshielded to meet your requirements. 155100002

Features:

156100002

◎ Join two patch cords ◎ Straight through ◎ Extend Category 5e/6 patch cords without loosing Category 5e/6

191510001

191620000

Specifications:

Features:

◎ PCB design for maximum reliability

◎ IDC material: PC UL-94V0

◎ Meeting the TIA/EIA-568-B.2, ISO/IEC11801 and EN50173-1 specifications.

◎ Keystone version available

◎ Contact plating: 50µ gold plated

◎ Complying with category 5e patch cord testing performance requirements.

◎ Tensile strength:20kg Min

◎ Connector accepts 22-26 AWG solid and stranded UTP cables.

performance

In-line Coupler PART NO. 191510001 191520000 191610001 191620000 197510002 197610002

DESCRIPTION Category 5e Unshielded In-line Coupler, Adapter Type, White Category 5e Shielded In-line Coupler, Adapter Type Category 6 Unshielded In-line Coupler, Adapter Type, White Category 6 Shielded In-line Coupler, Adapter Type Category 5e Unshielded In-line Coupler, Keystone Type, Black Category 6 Unshielded In-line Coupler, Keystone Type, Black

- G/5 -

◎ Supporting T568 A&B wiring & easy installation. ◎ Terminating cable without tools

Toolless RJ45 Plug 197510002

PART NO. 155100002 156100002

DESCRIPTION Category 5e Unshielded Toolless RJ45 plug, Black Category 6 Unshielded Toolless RJ45 plug, Black

- G/6 -

Tools & Accessories

◎ Body: UL94-V0 ABS, White or Ivory

Data Center Server Cabinet As a core part of the entire cabling system, cabinet are widely used and also take an irreplaceable role in the equipment room. Nowadays cabinet not only has the simple function of storing devices but also can provide protection, electromagnetic interference shielding, and arrange equipment orderly to facilitate future maintenance.

Premium Line Data Center Server Cabinet

Premium Line provides a complete cabinet solution includes the server cabinets, wall mount cabinets, cable management units & mounting accessories, also with active power supply devices, like power distribution unit, uninterruptible power supply and etc.

Network Server Cabinet Network Server Cabinet

Network Server Cabinet

Premium Line 19’’ server cabinets and wall mount cabinets meet the international standards ANSI /EIARS-310-C19, ANSI /EIARS-310-D, IEC

Wall Mount Cabinet

297-3, IEC 529 and DIN 40050. Premium Line server cabinets available in standard 19” , 600 × 800, 800 × 800 sizes, but not limit in this two options of size. We mainly supply the

Wall Mount Cabinet (Single Section)

27U, 32U, 37U, 42U types. The front door available in high strength toughened glass or perforated metal. The complete cabinet is made by excel-

Wall Mount Cabinet (Dual Section)

lent steels available to afford maximum 800kg static loading.

Accessory

Normally, the fixed accessories include cage nuts, castors and leveling feet. And also exist various optional accessories for your most economical

Cooling Fan

combinations, including fixed shelf, keyboard tray, front blank panel and cable managements, besides, all free standing cabinets available for 4 fans installation, and also with required power cords. All free standing cabinets will be shipping in “flat pack” to reduce the volume, and it will be

Castor for Reestanding Cabinet

easy to assemble.

Adjustable Fixed Feet for Cabinet Cage Nut for Cabinet

Wall Mount Cabinet Premium Line wall mount cabinets are mostly popular in single section or dual section design, to afford maximum 60kg static loading. It's available

19’’ Fixed Shelf for Cabinet

in size 19” 600 × 450, 6U, 9U, 12U, 15U and 18U. The wall mount cabinets are in key lockable design, and come with front glass door. All wall

19’’ Keyboard Tray for Cabinet

mount cabinets available for 2 cooling fans installation. Normally, the wall mount cabinets are pre-assembled for shipping.

Cable Management Power Distribution Unit

Power Distribution Unit Premium Line provides worldwide various type power outlets and power cords. Normally it's in standard 1U height suit for standard 19” cabinet

European Type

installation. Premium Line standard PDU comes with lighted master switch, but, the additional function like surge protection, current display is

American Type

available as well, the size will change to 1.5U.

UK Type

The left end single input and frontal installation design easy for future management and allocation.

French Type

Uninterruptible Power Supply

Uninterruptible Power Supply

UPS is an electrical apparatus that provides emergency power when the input power source is suddenly shut down, to protect exchange server,

Online UPS (Rack Mounted)

telecommunication equipment from damage and avoid data loss. In additional, as UPS outputs the standardized sinusoid voltage, so, in most situ-

Online UPS (Rack Mounted & Free Standing Convertible)

ations, it has been used to optimize the power for active devices in equipment room. The general categories of Premium Line UPS systems are on-line& line-interactive.

Line-interactive UPS (Rack Mounted)

Data Center Server Cabinet

www.premiumline-cabling.com

Network Server Cabinet Features: ◎ With fixed 19’’ installation on the front and rear for components according to IEC 297-3

Wall Mount Cabinet

◎ Detachable composite structure ◎ Cable entry via bottom and top cover

Single Section Features:

◎ Fan heat dispatch device

◎ Cable entry from top and bottom

◎ Door opening 180 angle

◎ Top cover ready for cooling fan installation

◎ Equipped with castors and adjustable fixed feet

◎ 60 kg static loading capacity

◎ High strength toughened glass frameless or perforated metallic front door is simple and beautiful

◎ Toughened glass front door with over 180° angle

Standard: ◎ Comply with ANSI /EIA RS-310-D, VDE 0100T 540 for grounding requirement, IEC 529/DIN 40050 for IP requirement

611264065

Wall Mount Cabinet (Single Section)

Material: ◎ All are made of quality zinc –plated mild steel sheets

Type

◎ Material thick :19” mounting bar 2.0mm ,the whole framework 1.2mm and each door 1.2mm

6U 9U 12U 15U 18U

◎ Surface treatment :Degreasing rust cleaning ,antirust phosphorizing and coating

Width 600 600 600 600 600

Dimensions (mm) Depth 450 450 450 450 450

Height 368 501 635 769 901

Weight (kg)

Part No.

16 23 27 29 36

611264065 611264095 611264125 611264155 611264185

Dach Kabelzuführung

Other type or black color upon request Grundgestell Querstrebe Vertikalprofil

Lüfter

Seitenblende

Wall Mount Cabinet Dual Section

Rückwand

Features: Seitenblende

◎ Cable entry from top and bottom ◎ Top cover ready for cooling fan installation ◎ 60 kg static loading capacity ◎ Toughened glass front door with over 180° angle

Kabelzuführung

◎ Lockable side door easy to open for installation

Nivellierfuß Fronttür

Rolle

Schrankboden

◎ Fixed 100mm back section space 612268422

Network Server Cabinet Shipping in "Flat Pack" Type 27U 32U 37U 42U

Width 600 600 600 600 800

Dimensions (mm) Depth 800 800 800 800 800

Height 1400 1600 1800 2000 2000

- H/1 -

Wall Mount Cabinet (Dual Section)

Weight (kg)

Part No.

Type

73 78 95 115 135

612X68272 612X68322 612X68372 612X68422 612X68422

6U 9U 12U 15U 18U

X=1 stands for perforated metal front door ; X=2 stands for glass front door; RAL7035 color upon request

614264092

Width 600 600 600 600 600

Dimensions (mm) Depth 450+100 450+100 450+100 450+100 450+100

Other type or RAL 7035 color upon request

- H/2 -

Height 368 501 635 769 901

Weight (kg)

Part No.

19 25 30 32 38

614264062 614264092 614264122 614264152 614264182

Data Center Server Cabinet

◎ Vertical cabinet can move backwards and forwards and adjust up and down to mount instrument

Data Center Server Cabinet

www.premiumline-cabling.com

Accessory Features: ◎ Use with main body for assistant function

Cable Management

◎ Various parts improve the performance ◎ Small light load standard equipments installed on terminal board

624100002

625100002

195040102

621000000

195030002 195070102

196000050

195000002

195020102

623000000

Accessory PART NO. DESCRIPTION 621000000 Cooling Fan for Cabinet 622000000 Wheel Feet for Cabinet 623000000 Adjustable Fixed Feet for Cabinet 196000050 Cage Nut for Cabinet, 50 sets/bag 624100002 19”Fixed Shelf for Cabinet, (W)470×(D1)350×(D2)260 mm Installation for 600 Depth Cabinets 624200002 19”Fixed Shelf for Cabinet,(W)470×(D1)550×(D2)460 mm Installation for 800 Depth Cabinets 624300002 19”Fixed Shelf for Cabinet, (W)470×(D1)650×(D2)560 mm Installation for 900 Depth Cabinets 625100002 19”Keyboard Tray for Cabinet, (W)470×(D1)350×(D2)380 mm Installation for 600 Depth Cabinets 625200002 19”Keyboard Tray for Cabinet, (W)470×(D1)350×(D2)580 mm Installation for 600 Depth Cabinets 625300002 19”Keyboard Tray for Cabinet, (W)470×(D1)350×(D2)680 mm Installation for 600 Depth Cabinets *Grey color on request for fixed shelf and keyboard tray

- H/3 -

Cable Management PART NO. 195010102 195010202 195020102 195020202 195070102 195000002 195030002 195040102 195040202 195040402

DESCRIPTION Premium Line 1U 19” Cable Management, Duct Type, Black Premium Line 2U 19” Cable Management, Duct Type, Black Premium Line 1U 19” Cable Management, Plastic Holder Type, Black Premium Line 2U 19” Cable Management, Plastic Holder Type, Black Premium Line 1U 19” Cable Management, Ellips Plastic Holder Type, Black Premium Line Cable Management Bar, Click On Type, Black (for all 1U 19" UTP Patch Panel) Premium Line Cable Management Bar, Screw Type, Black (for all 1U 19" patch panel) 1U 19” Blank Panel, Black 2U 19” Blank Panel, Black 4U 19” Blank Panel, Black

- H/4 -

Data Center Server Cabinet

195010102

Data Center Server Cabinet

www.premiumline-cabling.com

Power Distribution Unit European Type Features: ◎ Conform to DIN49440 and DIN49441 ◎ Maximum 16A 250V AC current capacity, 3.5KW ◎ Lighted master switch

UK Type

◎ 2m power cord, other length upon request ◎ Color: aluminum or plastic frame in black

Features:

◎ RoHS compliant

◎ BS1363 standard UK socket and plug ◎ Maximum 13A 230V AC current capacity, 3KW ◎ Lighted master switch ◎ Standard 1U 6 output and 1.5U 6 output with surge protect ◎ 2m power cord, other length upon request ◎ Color: aluminum or plastic frame in black ◎ RoHS compliant

632210611

Power Distribution Unit Surge Protector Type 631210811

631210821

Features: ◎ Available in European, UK & UL types ◎ Standard 1.5U mounting size,aluminum frame ◎ Dimension:482.6 × 66.67 × 62mm ◎ Optional lighted master switch ◎ 2m power cord, other length upon request

Power Distribution Unit

◎ Other type PDU upon request

American Type

◎ RoHS compliant

631810711

Features: ◎ IEC60906 two-pole socket-outlets with grounding contact

Power Distribution Unit

◎ Maximum 10A 110V AC current capacity, 2.5KW ◎ Lighted master switch ◎ Standard 1U 8 output and 1.5U 7 output with surge protect ◎ 2m power cord, other length upon request ◎ Color: aluminum or plastic frame in black ◎ RoHS compliantt

633210811

- H/5 -

PART NO. 631210811 631210821 632210611 632210621 633210811 633210821 631710611 631810711 632710611 632810611 633710711 633810711

DESCRIPTION Power Distribution Unit with Aluminium Body, European Type, 8 Outlets Power Distribution Unit with Non-metallic Body, European Type, 8 Outlets Power Distribution Unit with Aluminium Body, UK Type, 6 Outlets Power Distribution Unit with Non-metallic Body, UK Type, 6 Outlets Power Distribution Unit with Aluminium Body, UL Type, 8 Outlets Power Distribution Unit with Non-metallic Body, UL Type, 8 Outlets Power Distribution Unit with Aluminium Body, European Type ,6 Outlets with Surge Protector Power Distribution Unit with Aluminium Body, European Type ,7 Outlets with Surge Protector, without LED Switch Power Distribution Unit with Aluminum Body, UK Type, 6 Outlets with Surge Protector Power Distribution Unit with Aluminum Body, UK Type, 6 Outlets with Surge Protector, without LED Switch Power Distribution Unit with Aluminum Body, UL Type, 7 Outlets with Surge Protector Power Distribution Unit with Aluminum Body, UL Type, 7 Outlets with Surge Protector, without LED Switch

- H/6 -

Data Center Server Cabinet

Power Distribution Unit

◎ Standard 1U 8 output and 1.5U 6 output with surge protect

Data Center Server Cabinet

www.premiumline-cabling.com

Uninterruptible Power Supply Online UPS (Rack Mounted & Free Standing Convertible) Features: ◎ 19” rack mounted design ◎ High frequency and dual conversion on-line technology ◎ Advanced PFC technology, LED display ◎ Smooth sine wave output with less than 3%THD

Uninterruptible Power Supply

◎ Lighting and surge protections

Online UPS (Rack Mounted)

◎ Short and overload protections

Features:

◎ Min.5 minutes backup power supply, long term configuration upon request ◎ RS 232 socket

◎ 19” rack mounted design

◎ EMI /RFI noise filter

◎ Optional capacity 1K V/A to 10K V/A

Online UPS (Rack Mounted & Free Standing Convertible)

◎ Advanced PFC technology, LED display

PART NO. 642300101 642300201 642300301

◎ Smooth sine wave output with less than 3%THD, optimize AC supply ◎ Lighting and surge protections ◎ Short and overload protections

642100101

642300101

DESCRIPTION Premium Line On Line Rack Mounted & Free Standing UPS 1KVA Premium Line On Line Rack Mounted & Free Standing UPS 2KVA Premium Line On Line Rack Mounted & Free Standing UPS 3KVA

Uninterruptible Power Supply

◎ Min. 5 minutes backup power supply, long term configuration upon request ◎ RS 232 socket

Line-interactive UPS (Rack Mounted) PFC

Features:

Optimize Power Supply Online UPS first convert alternating current (AC power) to direct current (DC power) after pulse width modulation, and then convert it back to AC power

◎ 19” rack mounted design Mains Input

Input Filter

Input Relay

Rectifier Filter

Inverter

Load

◎ Automatically recharge in off mode ◎ self-diagnosis on startup

after DC regulating, the smooth sine wave AC output efficiently guarantee the active device running under optimized power supply, for key equipments

Output Relay

Charger

641006501

◎ Simulated sine wave output DC/DC

longer life-time and system safety. Battery

Filter

◎ Lighting and surge protections

AVR Output

◎ Short and overload protections

Inverter

◎ RS 232 socket

Emergency Power Supply UPS classical function is for emergency power supply. Premium Line all default configuration UPS available for minimum 5 minutes backup power supply, to protect device and network from the damage due to power shut down. In case for some unattended stations, longer time battery configuration is available as well.

Filter

Power Output

Charger

Line-interactive UPS normally used to AC input regulating, then output the

Battery

simulated sine wave for device power supply, and the optimized power output guarantee the equipment safe running

Capacity

1KV·A/700W

Voltage Range Frequency Voltage Frequency Distortion Waveform Overload Capability Battery Model Voltage Configuration

2KV·A/1400W 3KV·A/2100W 6KV·A/4200W 10KV·A/7000W Input Half-load 120-300V AC Full-load 165-300V AC 176-276VAC 45.5Hz-54.5Hz Output 220/230/240V ±3% 50/60Hz ±0.5 150%:1Min 12V sealed lead acid maintenance free 36V DC 96V DC 240V DC 3×12v/7Ah 8×12V/7Ah 20×12V/7Ah

Online UPS (Rack Mounted) PART NO. 642100101 642100201 642100301 642100601 642101001

DESCRIPTION Premium Line On Line Rack Mounted UPS 1KVA Premium Line On Line Rack Mounted UPS 2KVA Premium Line On Line Rack Mounted UPS 3KVA Premium Line On Line Rack Mounted UPS 6KVA Premium Line On Line Rack Mounted UPS 10KVA

- H/7 -

Emergency Power Supply Line-interactive UPS self-diagnosis function will determine and active the backup power supply within 5~10ms, to avoid any damage caused by power shut. Capacity Input voltage Frequency Phase Output voltage Frequency Distortion Waveform Transfer time Battery voltage Battery type Backup time

650V·A/390W

800V·A/480W 1200V·A/720W 100V/110V/120V/220V/230V/240V±25% 50/60Hz±5% Single phase power with grounding 100V/110V/120V/220V/230V/240V±25% AC Mode: track the utility Battery Mode:50/60hz±5% 3min (full load )

Line-interactive UPS (Rack Mounted) PART NO. 641006501 641008001 641012001

DESCRIPTION Premium Line Line-Interactive UPS 650VA Premium Line Line-Interactive UPS 800VA Premium Line Line-Interactive UPS 1200VA

- H/8 -

Load

Data Center Server Cabinet

◎ High frequency and dual conversion on-line technology

Fiber Optic Solution Since over 30 years ago first fiber optic data cable installed and applied for commercial wise, now, with the technique improvement of fiber optic, and also the competitive cost of the complete range of optic devices, to fulfill the high speed data network & telecommunication, definitely will be on its duty.

Optic Fiber- Made by the most common substance, silicon dioxide (SiO2), in complete core diameter 9um - single mode, 62.5um - OM1, 50um – OM2/OM3, and with 125um refraction cladding, to afford light signal transmission supports long distance and high speed data network & telecommunication.

Premium Line Fiber Optic Solution Optic Fiber Single-mode Optic Fiber Multimode Optic Fiber

Wide Area Network Technology- To use the light to transmit the signals from one place to another place over optic fiber, is due to the light propagates through the fiber with little attenuation also immune to electromagnetic interference. These advantages also contribute to fiber optic development and practical application.

Wide Area Network- Since the beginning of fiber optic application, it’

s more often to use single mode fiber optic cable to support long distance telecommunication & data network, this is more called classical WAN – wide area network. The fiber optic cable normally could be placed

in outdoor conduits or directly aerial installation. Premium Line WAN fiber optic systems provides two installation types and customize various cable constructions on your special requirements for

ADSS Fiber Optic Cable, 9/125um G652D Figure 8 Fiber Optic Cable, 9/125um G652D Outdoor Parallel Steel Wires & Steel Armored Uni-tube Fiber Optic Cable Outdoor Steel Armored Multi-tube Fiber Optic Cable Outdoor Steel Armored Double Sheath Multi-tube Fiber Optic Cable Fiber Optic Dome Type Splice Enclosure Fiber Optic Inline Type Splice Enclosure

Local Area Network

Local Area Network- In most classical premise cabling, SM or MM fiber optic cables more used as backbone cabling, and converts the optical signals to electrical signals to the end subscriber through the corresponding copper communication cables. It’ s also available for the place

Outdoor Glass Strength Uni-tube Fiber Optic Cable Outdoor Steel Armored Glass Strength Uni-tube Fiber Optic Cable Indoor Tight Buffer Distribution Fiber Optic Cable 19” Fiber Optic Patch Panel Fully Loaded Adapter Plate 19” Rack Mounted ODF Wall Mount Box

where distance over 100 meters not available for copper cables.

Connectivity

dedicated condition use, like ADSS- for where electrical shock happens often; Figure 8 outdoor aerial cable for the place where has heavy wind or ice weather and etc. Premium Line also provides outdoor accessories like splice closures, available for aerial, direct ground buried and duct installation purpose.

Regarding to the pure fiber optic cabling system, with the PON- passive optical network system develop, like IEEE E-PON, ITU G-PON, the one point to multipoint network. Also the extension base on above systems and protocol comes with FTTX applications which depend on the ONU location. Premium Line LAN fiber optic systems provides different type cables to fulfill these fiber optic solutions, especially the FTTH cable series, with customer’ s choice on normal G652D fibers, or G657A low bending loss fiber for complex corner-bending situation. Premium Line is capable to provide you all types’ high quality and reliable fiber optic cables.

Component- Premium Line solution includes a full range of optic devices, fiber optic cables, and also the accessories like pigtails, patch cords, adapters and different type’ s terminal boxes. Premium Line has complete ranges of these components with low attenuation loss control, combines with fiber optic cables, support the complete channel with good headroom margin.

Fiber Optic Pigtail 12 Pack Pigtail Fiber Optic Patch Cord Adapter Fiber Optic Connector Zip-cord

FTTX FTTH Cable FTTD Wall Box Fiber Optic Faceplate

Fusion Splicer

Fiber Optic Solution

www.premiumline-cabling.com

Optic Fiber

Single-mode Optic Fiber Optical Characteristics Attenuation

Attenuation vs.Wavelength

G652D

G657

@1310 nm

≤0.35 dB/KM

≤0.35 dB/KM

@1383 nm

≤0.35 dB/KM (After H2 aging)

≤0.35 dB/KM (After H2 aging)

@1550 nm

≤0.22 dB/KM

≤0.21dB/KM

@1625 nm

≤0.23 dB/KM

1285~1330 nm

≤0.03 dB/KM

≤0.03 dB/KM

@1550 nm

1525~1375 nm

≤0.02 dB/KM

≤0.02 dB/KM

-

-

1530~1565 nm Dispersion Coefficient

1565~1625 nm

-

-

1285~1340 nm

-3.0~3.0 ps/(nm.km)

-

@1550 nm

≤18 ps/(nm.km)

≤18 ps/(nm.km)

≤22 ps/(nm.km)

≤22 ps/(nm.km)

Zero Dispersion Wavelength

@1625 nm

1302~1322 nm.km

1300~1324 nm.km

Zero Dispersion Slope

≤0.090 ps/(nm².km)

≤0.092 ps/(nm².km)

Zero Dispersion Slope (Typical) Polarization Mode Dispersion

≤0.086 ps/(nm².km)

-

Maximum Individual Fiber

≤0.2 ps/√km

≤0.2 ps/√km

Design Link (Value M=20.0=0.01%)

≤0.1 ps/√km

≤0.1 ps/√km

Group Index of Refraction (Typical)

Optical Characteristics Attenuation

Bandwidth

OM1

OM2

OM3

@ 850 nm

≤3.0 dB/KM

≤3.0 dB/KM

≤2.8 dB/KM

@1300 nm

≤0.8 dB/KM

≤0.8 dB/KM

≤0.7 dB/KM

@ 850 nm

≥200 Mhz.KM

≥200 Mhz.KM

≥1500 [email protected] ≥2000 [email protected]

@1300 nm

≥600 Mhz.KM

≥500 Mhz.KM

≥500 Mhz.KM

@ 850 nm

33 M

82 M

300 M

10Gb/s Ethernet Link Distance (10GBASE-SR)

Zero Dispersion Wavelength Group Index of Refraction (Typical)

1320~1365 nm

1295~1320 nm

1295~1320 nm

@850 nm

1.496

1.482

1.482

@1300 nm

1.491

1.477

1.477

Geometrical Characteristics

≤1260 nm

≤1260 nm

Core Diameter

62.5±2.5 µm

50±2.5 µm

50±2.5 µm

@1310 nm

9.2±0.4 µm

8.8±0.4 µm

Cladding Diameter

124.8±1.0 µm

124.8±1.0 µm

124.8±1.0 µm

@1550 nm

10.4±0.5 µm

9.8±0.5 µm

Cladding Non-Circularity

≤1.0%

≤1.0%

≤1.0%

@1310 nm

1.466

1.466

Coating Diameter

245±7 µm

245±7 µm

245±7 µm

@1550 nm

1.467

1.467

Coating/Cladding Concentricity Error

≤12.0 µm

≤12.0 µm

≤12.0 µm

Coating Non-Circularity

≤6.0%

≤6.0%

≤6.0%

Core/Cladding Concentricity Error

≤1.5 µm

≤1.5 µm

≤1.0 µm

Cable Cut-off Wavelength Mode Field Diameter

Multimode Optic Fiber

Geometrical Characteristics Cladding Diameter

124.8±0.7 µm

124.8±0.7 µm

Cladding Non-Circularity

≤0.7%

≤0.7%

Coating Diameter

245±5 µm

245±5 µm

Coating/Cladding Concentricity Error

≤12.0 µm

≤12.0 µm

Environmental Characteristics (@850 nm/@1300 nm) Attenuation at Temperature cycling △ α (-60°C~+85°C)

≤0.10 dB/km

≤0.10 dB/km

≤0.10 dB/km

Attenuation at Temperature-Humidity Cycling (-10°C~+85°C, 98% R.H.)

≤0.10 dB/km

≤0.10 dB/km

≤0.10 dB/km

Coating Non-Circularity

≤6.0%

≤6.0%

Core/Cladding Concentricity Error

≤0.5 µm

≤0.5 µm

Curl (Radius)

≥4 m

≥4 m

Attenuation at Damp Heat Dependence (85°C, 98% R.H., 30 days)

≤0.10 dB/km

≤0.10 dB/km

≤0.10 dB/km

Attenuation at Temperature cycling △ α (-60°C~+85°C)

≤0.05 dB/km

≤0.05 dB/km

≤0.10 dB/km

≤0.10 dB/km

≤0.10 dB/km

Attenuation at Temperature-Humidity Cycling (-10°C~+85°C, 98% R.H.)

≤0.05 dB/km

≤0.05 dB/km

Attenuation at Watersoak Dependence (23°C, 30 days)

Attenuation at Damp Heat Dependence (85°C, 98% R.H., 30 days)

≤0.05 dB/km

≤0.05 dB/km

Attenuation at Watersoak Dependence (23°C, 30 days)

≤0.05 dB/km

≤0.05 dB/km

Environmental Characteristics (@1310 nm/@1550 nm)

Mechanical Characteristics Proof Test (Off Line) 1 Turn, 7.5 mm Radius Attention at Bending Dependence

Proof Test (Off Line) Macrobend Loss (100 Turn, 25mm Radius)

≥9.0 N (≥100 kpsi)

≥9.0 N (≥100 kpsi)

≥9.0 N (≥100 kpsi)

850 nm

≤0.05 dB

≤0.05 dB

≤0.05 dB

1300 nm

≤0.05 dB

≤0.05 dB

≤0.05 dB

≥9.0 N (≥100 kpsi)

≥9.0 N (≥100 kpsi)

-

≤0.5 dB

Coating Strip Force (Typical)

1.5 N

1.5 N

1.5 N

Dynamics Stress Corrosion Susceptibility Parameter(Nd, Typical)

≥27

≥27

≥27

1Turn, 10 mm Radius

-

≤0.1 dB

1Turn, 15 mm Radius

-

≤0.03 dB

1Turn, 25 mm Radius

≤0.05 dB

-

Coating Strip Force (Typical)

1.7 N

1.7 N

Dynamics Stress Corrosion Susceptibility Parameter (Nd, Typical)

≥20

≥20

- I/1 -

Mechanical Characteristics

- I/2 -

Fiber Optic Solution

≤0.24 dB/KM

@1310 nm

Optic Fiber

Fiber Optic Solution

www.premiumline-cabling.com

Wide Area Network Figure 8 Fiber Optic Cable, 9/125um G652D This kind of cable use upper messenger wire to support aerial cabling, it designs for the place where has

Wide Area Network

heavy wind weather or even ice frozen climate. The cable requires specified working load tension design to provide capable construction and mechanical characteristics to afford outdoor vile condition.

ADSS Fiber Optic Cable, 9/125um G652D

Normally, it’ s recommended to use ITU-G652D fiber for data transmission, other mode upon request, as well

Customized Fiber Optic Cable

as the outer sheath.

Premium Line dedicated fiber optic technical team capable to design various

Normally, you can provide us the local climate information also the worst wind speed to design it accordingly.

telecom systems cables for you base on requirements or provided location

Optic Fiber Thixotropic Jelly

climate information where intend to use.

PBT Loose Tube

Technical Parameters

All Dielectric Self Supporting Fiber Optic Cable

FRP SCM Cable Jelly

This kind of cable more often be installed on overhead power lines, gantries Polyester Tape

or damage.

Inner Sheath

Normally, you can provide us the local climate information also the electrical

Aramid Yarm

field strength to design it accordingly.

Outer sheath

Cable Physical / Environmental Performance Maximum Span Cable Sag (%) Temperature Range Worst Environmental Conditions

100 meters 1.0% -20 °C to +70 °C 100 kms/hr wind speed (No Ice)

Cable Characteristics Maximum Working Tension (No Fiber Strain) Estimated Tensile Strength Thermal Coefficient of Expansion Area of Aramid Approx. Cable Weight Cable Diameter Radial Thickness of Sheath Minimum Bending Radius Crush Resistance Water Penetration Outer Sheath Materia Max. Electrical Field Strength

4.12 kN (420 kgs) 10.3 kN (1050 kgs) 20.83×10-6 °C 4.5 mm² 120 kgs/km 12.2 mm 1.5 mm Dynamic 700 mm, Static 350 mm 2000 N/10 cm No water penetration of the cable core, on a 3 meter sample, with a 1 meter head of water applied for 24 hours HDPE (non anti-tracking) ≤ 12 kV/m tested according to IEEE P1222

Units mm mm kg/km mm mm mm m % km/h kN kN N/10 cm Nm °C m

Condition

Temp

EDS Low Temp, No Wind High Temp, No Wind Low Temp, Wind EDS Temp, Wind High Temp, Wind

25

-

150

0

-

70 0

4, 6, 12, 24 48 9.6 Dia. × 17.0 High. 10.5 Dia. × 18.5 High. 7 × 1.0 7 × 1.2 162 200 2.0 Dia. × 2.0 High. 1.5 Nominal 1.2 Nominal ≥ 20 × Cable Diameter ≥ 10 × Cable Diameter Span ≤ 100m Sag ≥ 1.0% 100 (No Ice) 3.53 4.2 8.08 11.6 1500 3Nm with striking surface radius of 10mm -20°C ~ +70°C 4000 ± 5%

MAT = Maximum allowable tension, or maximum working tension (worse environmental conditions) and fibers have zero fiber strain. UTS = Approx. Breaking strain of the cable

Environmental Condition and Cable Loads, Sags, etc. Wind Cable Load kgs % UTS km/hr

Value / Details ITU-T G652D

Fiber Optic Solution

or poles, its’ all dielectric construction protect it against electric shock impact

Parameter Fiber Type Fiber Count Cable Diameter Messenger Wire Dia Cable Weight Web Dimensions Cable Sheath, Radial Messenger Sheath, Radial Dynamic Bending Radius Static Maximum Span Cable Sag Max. Wind Speed Max. Working Load (MAT) Ultimate Tensile Strength (UTS) Crush Resistance Impact Resistance Operational Temperature Shipping Lengths

Messenger Wire

Sag (mtrs)

14%

Vert 1

Plane 1

184

18%

0.81

-

113

11%

100

294

28%

Blow Out Cable Elong Angle % 0

0.212

0.81

0

0.203

1.33

1.33

0

0.233

0.51

2.55

78.4

0.358

LSZH Sheath Optical Fiber Thixotropic Jelly PBT Loose Tube Water Blocking Yarm FRP Strength Member Water Blocking Tape

25

100

273

26%

0.55

2.74

78.4

0.386

70

100

279

24%

0.6

3

78.4

0.426

ADSS Fiber Optic Cable, 9/125um G652D Number of Fibers 12 24 Part No.

260223012

260223024

LSZH Sheath Ripcord

48

72

96

144

260223048

260223072

260223096

260223144

- I/3 -

Figure 8 Fiber Optic Cable, 9/125um G652D Number of Fibers 12 24 Part No.

269222012

269222024

48

72

96

144

269222048

269222072

269222096

269222144

- I/4 -

Fiber Optic Solution

www.premiumline-cabling.com

Wide Area Network

Outdoor Steel Armored Multi-tube Fiber Optic Cable Install the fiber optic cable inside of existed conduits, this need excellent tensile strength also additional steel tape armored to against rodent. This kind of fiber optic cable is also available for campus cabling.

Wide Area Network

Outdoor Parallel Steel Wires & Steel Armored Uni-tube Fiber Optic Cable Two parallel steel wires construction cable suits for aerial installation. With additional corrugated steel tape protection make it also available for duct installation.

Steel Tape Fiber Optic

Outer sheath Corrugate Steel Tape

Fiber Optic Solution

Thixotropic Jelly Loose Tube

Waterproof Tape Filler

Steel Wire

Central Strength Member

Fiber Optic

Jelly Compound PE Sheath

Jelly Compound Loose Tube

Structure & Environmental Characteristics Loose Tube

Material Material Diameter Material Material Material / Color

Peripheral Strength Member Wrapping Messenger Wire Dia Sheath Operating Temperature Storage / Transport Temperature Installation Temperature

Structure & Environmental Characteristics

PBT Steel Wire 1.0 mm Waterproof Tape Corrugated Steel Tape PE / Black -40°C ~ +60°C -50°C ~ +70°C -10°C ~ +50°C

Loose Tube Strength Member Moisture Barrier Sheath Operating Temperature

Outside Diameter (mm)

Loose Tube Diameter (mm)

Cable Weight (kg/km)

Tensile Load

Crush Load

Short Term Long Term Short Term Long Term (N) (N) (N) (N)

2 8.0 2.4 71 1500 600 4 8.0 2.4 71 1500 600 6 8.0 2.4 71 1500 600 8 8.5 2.8 80 1500 600 12 8.5 2.8 80 1500 600 24 9.5 3.6 90 1500 600 Compliant Standard:ITU-T G651 / ITU-T G652 D, ANSI/TIA B.3, IEC-794

1000 1000 1000 1000 1000 1000

300 300 300 300 300 300

Outdoor Parallel Steel Wires & Steel Armored Uni-tube Fiber Optic Cable Number of Fibers 9/125 50/125 62.5/125 4 6 8 12 24

267123004 267123006 267123008 267123012 267123024

267133004 267133006 267133008 267133012 267133024

- I/5 -

267113004 267113006 267113008 267113012 267113024

PBT Steel Wire Corrugated Steel Tape Water-resistant Compound PE / Black -40°C ~ +60°C

Mechanical Characteristics

Mechanical Characteristics Fiber Count

Material Material Material Material Material / Color

Bend Radius Static (mm)

Dynamic (mm)

10D 10D 10D 10D 10D 10D

20D 20D 20D 20D 20D 20D

50/125(OM3) 267143004 267143006 267143008 267143012 267143024

Fiber Count

Outside Diameter (mm)

Cable Weight (kg/km)

Tensile Load Short Term (N)

Long Term (N)

4 11.5 110 1500 600 8 11.5 110 1500 600 12 11.5 110 1500 600 24 11.5 110 1500 600 72 11.5 152 1500 600 144 15.7 181 1500 600 Compliant Standard:ITU-T G651 / ITU-T G652 D, ANSI/TIA B.3, IEC-794

Outdoor Steel Armored Multi-tube Fiber Optic Cable Number of Fibers 9/125 50/125 4 8 12 24 72 144

265223004 265223008 265223012 265223024 265223072 265223144

265233004 265233008 265233012 265233024 265233072 265233144

- I/6 -

Crush Load (N/100mm) 2000 2000 2000 2000 2000 2000

Bend Radius Static (mm)

Dynamic (mm)

10D 10D 10D 10D 10D 10D

20D 20D 20D 20D 20D 20D

62.5/125

50/125(OM3)

265213004 265213008 265213012 265213024 265213072 265213144

265243004 265243008 265243012 265243024 265243072 265243144

Fiber Optic Solution

www.premiumline-cabling.com

Wide Area Network

Fiber Optic Dome Type Splice Enclosure Premium Line fiber optic dome type splice enclosure is in hermetically sealed design, easy for assembly and re-entry. The

Wide Area Network

closure is designed with a gasketed split end plate for midaccess cable application and includes an integrated stack stor-

Outdoor Steel Armored Double Sheath Multi-tube Fiber Optic Cable The two layer sheath provides good crush resistance performance, also the good mechanical and temperature performance. It performs excellent water resistance and moisture resistance especially in the direct buried application or conduit cabling.

age basket. Max. 6 * 24 cores splice trays support up to 144 cores splice inside and no need special tools for trays fixing or unloading. This type enclosure is available for aerial or wall mount application. FEATURES: ◎ Reliable mechanical sealing to prevent liquid or steam penetration ◎ Easy to open and reopen ◎ Splice tray capacity: 24cores

Thixotropic Jelly

◎ 2 in 2 out type up to 72 cores, 3in 3out type up to 144 cores

Steel Wire

◎ Made by high strength engineering material to against impact or hit

Filler

Fiber Optic Dome Type Splice Enclosure

Jelly Compound

PART NO. 541122402 541132402 541242402 541262402

Aluminum Tape Inner Sheath Steel Tape Outer Sheath

Structure & Environmental Characteristics Loose Tube Strength Member Reinforcement Wrapping Sheath Operating Temperature Storage / Transport Temperature Range Installation Temperature Range

Material Material Diameter Material Material Material / Color

Outside Diameter (mm)

Loose Tube Diameter (mm)

Fiber Optic Inline Type Splice Enclosure Premium Line fiber optic dome type splice enclosure is in hermetically sealed design, easy for assembly and re-entry. The closure is designed with a gasketed split end plate for mid-access cable application and includes an integrated stack storage basket. Max. 6 * 24 cores splice trays support up to 144 cores splice inside and no need special tools for trays fixing or unloading. This type enclosure is available for aerial or wall mount application. FEATURES:

Cable Weight (kg/km)

Tensile Load

Crush Load

Short Term Long Term Short Term Long Term (N) (N) (N) (N)

4 13.7 1 205 3000 1000 8 13.7 2 205 3000 1000 12 13.7 2 205 3000 1000 24 13.7 4 205 3000 1000 72 14.5 6 236 3000 1000 144 19.1 12 373 3000 1000 Compliant Standard:ITU-T G651 / ITU-T G652 D, ANSI/TIA B.3, IEC-794

3000 3000 3000 3000 3000 3000

Outdoor Steel Armored Double Sheath Multi-tube Fiber Optic Cable Number of Fibers 9/125 50/125 4 8 12 24 72 144

DESCRIPTION Premium Line FO Splice Closure, w/4 Cable Ports (2in, 2out), 48 Cores, Dome Type Premium Line FO Splice Closure, w/4 Cable Ports (2in, 2out), 72 Cores, Dome Type Premium Line FO Splice Closure, w/6 Cable Ports (3in, 3out), 96 Cores, Dome Type Premium Line FO Splice Closure, w/6 Cable Ports (3in, 3out), 144 Cores, Dome Type

Wide Area Network

PBT Steel Wire Nom. 2.0 mm Corrugated Steel Tape Aluminum Tape PE / black -40°C ~ +60°C -50°C ~ +70°C -10°C ~ +50°C

Mechanical Characteristics Fiber Count

541242402

266223004 266223008 266223012 266223024 266223072 266223144

266233004 266233008 266233012 266233024 266233072 266233144

- I/7 -

1000 1000 1000 1000 1000 1000

Bend Radius Static (mm)

Dynamic (mm)

12.5D 12.5D 12.5D 12.5D 12.5D 12.5D

25D 25D 25D 25D 25D 25D

◎ Comply to IEC 1073-1:1994 test requirements ◎ Reliable mechanical sealing to prevent liquid or steam penetration ◎ Easy to open and reopen ◎ 6 cable entry ports (3in, 3out) for cable diameters of 23 mm(2), 20 mm(2), 16 mm(2) ◎ Splice tray capacity: 24cores ◎ Maximum number of splice trays: 8 ◎ Dimension: up to 96cores, 450 × 216 × 110mm; up to 192cores, 450 × 216 × 160 mm ◎ Suit for areial, duct and direct buried application

62.5/125

50/125(OM3)

266213004 266213008 266213012 266213024 266213072 266213144

266243004 266243008 266243012 266243024 266243072 266243144

Fiber Optic Inline Type Splice Enclosure PART NO. 542222402 542232402 542242402 542262402 542282402

DESCRIPTION Premium Line FO Splice Closure w/6 Cable Ports (3in, 3out), 48 Cores Premium Line FO Splice Closure w/6 Cable Ports (3in, 3out), 72 Cores Premium Line FO Splice Closure w/6 Cable Ports (3in, 3out), 96 Cores Premium Line FO Splice Closure w/6 Cable Ports (3in, 3out), 144 Cores Premium Line FO Splice Closure w/6 Cable Ports (3in, 3out), 192 Cores

- I/8 -

542222402

Fiber Optic Solution

◎ Available 2in 2out and 3in 3out types

Loose Tube Fiber Optic

Fiber Optic Solution

www.premiumline-cabling.com

Local Area Network

Outdoor Steel Armored Glass Strength Uni-tube Fiber Optic Cable

Local Area Network

This kind of fiber optic cable comes additional glass yarn strength member to provide double rodent protec-

Outdoor Glass Strength Uni-tube Fiber Optic Cable

tion. The compact design suit for duct buried application or conduit installation.

The optic fibers are positioned in a loose tube made of high modulus plastics. The tube is filled with filling compound to give the fibers excellent water proof performance. The glass yarn between the jacket and loose tube is a strength member and provides rodent resistance. Cable is completed with a polyethylene (PE) jacket.

Optical Fiber

Optic Fiber

Fiber Optic Solution

Thixotropic Jelly PBT Loose Tube

Tube Filling Compound Loose Tube

Glass Yarn Corrugated Steel Tape Glass Yarn

Black Outer Sheath

Jacket

Structure & Environmental Characteristics Loose Tube Strength Member Wrapping Moisture Barrier Sheath Operating Temperature Storage / Transport Temperature Installation Temperature

Structure & Environmental Characteristics Loose Tube Peripheral Strength Member Wrapping Sheath Operating Temperature Storage / Transport Temperature Installation Temperature

Material Material Material Material / Color

PBT Glass Yarn Filling Compound PE / Black -40°C ~ +60°C -50°C ~ +70°C -10°C ~ +50°C

Outside Diameter (mm)

NominalCable Weight (kg/km)

Crush Resistance N/100mm

Tensile Load Short Term (N)

4 7.5 49 1000 1500 6 7.5 49 1000 1500 8 7.5 49 1000 1500 12 7.5 49 1000 1500 24 8.0 52 1000 1500 Compliant Standard:ITU-T G651 / ITU-T G652 D, ANSI/TIA B.3, IEC-794

Outdoor Glass Strength Uni-tube Fiber Optic Cable Number of Fibers 9/125 50/125 4 263123004 6 263123006 8 263123008 12 263123012 24 263123024 LSOH or PVC sheath upon request

PBT Glass Yarn Thixotropic Jelly Corrugated Steel Tape PE / Black -40°C ~ +60°C -50°C ~ +70°C -10°C ~ +50°C

Mechanical Characteristics

Mechanical Characteristics Fiber Count

Material Material Material Material Material / Color

263133004 263133006 263133008 263133012 263133024

- I/9 -

Bend Radius

Long Term (N)

Static (mm)

Dynamic (mm)

600 600 600 600 600

10D 10D 10D 10D 10D

20D 20D 20D 20D 20D

62.5/125

50/125(OM3)

263113004 263113006 263113008 263113012 263113024

263143004 263143006 263143008 263143012 263143024

Fiber Count

Outside Diameter (mm)

Nominal cable Weight (kg/km)

Crush Resistance N/100mm

Tensile Load Short Term (N)

2 8.3±0.3 70 1000 1500 4 8.3±0.3 70 1000 1500 6 8.3±0.3 70 1000 1500 8 8.3±0.3 70 1000 1500 12 8.3±0.3 70 1000 1500 24 10.3±0.3 85 1000 1500 Compliant Standard:ITU-T G651 / ITU-T G652 D, ANSI/TIA B.3, IEC-794

Long Term (N)

Static (mm)

Dynamic (mm)

600 600 600 600 600 600

10D 10D 10D 10D 10D 10D

20D 20D 20D 20D 20D 20D

Outdoor Steel Armored Glass Strength Uni-tube Fiber Optic Cable Number of Fibers 9/125 50/125 62.5/125 4 6 8 12 24

265123004 265123006 265123008 265123012 265123024

265133004 265133006 265133008 265133012 265133024

- I/10 -

Bend Radius

265113004 265113006 265113008 265113012 265113024

50/125(OM3) 265143004 265143006 265143008 265143012 265143024

Fiber Optic Solution

www.premiumline-cabling.com

Local Area Network 19” Fiber Optic Patch Panel Premium Line 19” Rack mountable fiber optic patch panel is designed for both patching and splicing, accepts whole range of adapters including SC, ST, FC, LC adapters. 2 * Rear cable entries accommodate cables with diameter below 10mm. Inside splice trays stacked and available for 48 cores (for LC) terminated inside, and cable

Local Area Network

spools with 35mm bending radius guarantee all modes fiber storage inside with additional low bending loss. Indi-

Indoor Tight Buffer Distribution Fiber Optic Cable

vidual front adapter plate use screws to fix, easy to assemble and exchange. The metal frame is made by cold

The 900µm tight buffer fibers are distributed in the center of the cable. The aramid yarn as strength member surround the

rolled steel/1.6 mm, and in 1U finished height.

fibers, provides excellent tensile strength when it’ s in installation, the cable is completed with a LSOH jacket. As the classical premise backbone cabling fiber optic cable, the compact construction is ease for field installation.

Outer Sheath

Fiber Optic Solution

Aramid Yarm

Tight Buffer

Optic Fiber

Structure & Environmental Characteristics Tight Buffer Peripheral Strength Member

Material Material Material Color

Sheath

PVC, LSOH or OFNR Aramid Yarn PVC, LSOH or OFNR Yellow or Orange -20°C ~ +60°C -20°C ~ +60°C -5°C ~ +50°C

Operating Temperature Storage / Transport Temperature Installation Temperature

Fiber Optic Patch Panel

Mechanical Characteristics Fiber Count

Outside Diameter (mm)

TBF Diameter (µm)

Cable Weight (kg/km)

2 4 6 8 12 24

3.2 ± 0.25 4.8 ± 0.25 5.1 ± 0.25 5.6 ± 0.25 6.2 ± 0.25 8.2 ± 0.25

900 ± 50 900 ± 50 900 ± 50 900 ± 50 900± 50 900 ± 50

10 18 22.5 28 38 63

Tensile Load

Crush Load

Short Term Long Term Short Term Long Term (N) (N) (N) (N) 660 660 660 660 660 1320

200 200 200 200 200 400

1000 1000 1000 1000 1000 1000

300 300 300 300 300 300

Bend Radius Static (mm)

Dynamic (mm)

20D 20D 20D 20D 20D 20D

10D 10D 10D 10D 10D 10D

Tight Buffer Code No. Color No. Color

DESCRIPTION Premium Line Fiber Optic Patch Panel Main Body, Black Blank Panel for Fiber Optic Patch Panel, Black 8port ST Front Panel for Fiber Optic Patch Panel, Black 8port SC Front Panel for Fiber Optic Patch Panel, Simplex, Black Splice Cassette, for 12-port, Grey

Local Area Network Fully Loaded Adapter Plate Premium Line provides you fully loaded adapter panel, with whole range of fiber adapter types. The changeable adapter plate design makes sure it can be easily and quickly

1 2 3 4 5 Blue Orange Green Brown Grey 13 14 15 16 17 Blue Orange Green Brown Grey w/Black w/Black w/Black w/Black w/Black Tracer Tracer Tracer Tracer Tracer

6 7 8 9 10 11 12 White Red Black Yellow Purple Pink Aqua 18 19 20 21 22 23 24 White Red Black Yellow Purple Pink Aqua w/Black w/Black w/Black w/Black w/Black w/Black w/Black Tracer Tracer Tracer Tracer Tracer Tracer Tracer

Indoor Tight Buffer Distribution Fiber Optic Cable, LSOH Number of Fibers 9/125 50/125 4 6 8 12 24

PART NO. 241100002 242500002 242302082 242301082 243000005

261322004 261322006 261322008 261322012 261322024

261332004 261332006 261332008 261332012 261332024

- I/11 -

62.5/125

50/125(OM3)

261312004 261312006 261312008 261312012 261312024

261342004 261342006 261342008 261342012 261342024

changed. Saving your time, saving your expenses. Fully Loaded Adapter Plate PART NO. 242311082 242321082 242312082 242322082 242413082 242423082 242314082 242324082

DESCRIPTION 8port SC , Adapter Panel Simplex, MM, Fully Loaded, Black 8port SC , Adapter Panel Simplex, SM, Fully Loaded, Black 8port ST , Adapter Panel Simplex, MM, Fully Loaded, Black 8port ST , Adapter Panel Simplex, SM, Fully Loaded, Black 8port LC , Adapter Panel Duplex, MM, Fully Loaded, Black 8port LC , Adapter Panel Duplex, SM, Fully Loaded, Black 8port FC , Adapter Panel Simplex, MM, Fully Loaded, Black 8port FC , Adapter Panel Simplex, SM, Fully Loaded, Black

Other ports options upon request

- I/12 -

Fiber Optic Solution

www.premiumline-cabling.com

Local Area Network 19” Rack Mounted ODF Premium Line rack mounted Optic Distribution Frame – ODF suits for standard 19” server cabinet installation. This ODF is available for maximum 72 cores terminated inside with SC or FC connectors & adapters, or 144cores for LC duplex adapters.

Connectivity Fiber Optic Pigtail

Design to fit with integrated adapter plate & splices tray, easy for open and Fiber Optic Pigtail

cords manage.

PART NO. DESCRIPTION 223111L SC Single Mode Pigtail, 9/125, 0.9 mm 221111L SC Multimode Pigtail, 62.5/125, 0.9 mm 222111L SC Multimode Pigtail, 50/125, 0.9mm 224111L SC Multimode Pigtail, OM3 50/125, 0.9 mm 223141L LC Single Mode Pigtail, 9/125, 0.9 mm 221141L LC Multimode Pigtail, 62.5/125, 0.9 mm 222141L LC Multimode Pigtail, 50/125, 0.9 mm 224141L LC Multimode Pigtail, OM3 50/125, 0.9 mm “L” as a substitute for length: 010 = 1 m 020 = 2 m 030 = 3 m 050 = 5 m 070 = 7 m 100 = 10 m Other length, type, UPC/APC, LSOH sheath upon request

19” Rack Mounted ODF PART NO. 245001725 245003725 245011725 245021725 245013725 245023725 245014725 245024725

DESCRIPTION 19” Rack Mounted ODF, 72cores, w/ SC(LC duplex) Simplex Adapter Plate, w/o Adapter 19” Rack Mounted ODF, 72cores, w/ FC Simplex Adapter Plate, w/o Adapter 19” Rack Mounted ODF, 72cores, w/ SC/PC MM Simplex Adapter Loaded 19” Rack Mounted ODF, 72cores, w/ SC/PC SM Simplex Adapter Loaded 19” Rack Mounted ODF, 72cores, w/ FC/PC MM Simplex Adapter Loaded 19” Rack Mounted ODF, 72cores, w/ FC/PC SM Simplex Adapter Loaded 19” Rack Mounted ODF, 72cores, w/ LC/PC MM Duplex Adapter Loaded 19” Rack Mounted ODF, 72cores, w/ LC/PC SM Duplex Adapter Loaded

Connectivity 12 Pack Pigtail Premium Line 12 pack pigtail integrated design with good performance will be your better choice. Completely connector range including FC, ST, SC, LC, 12 different colorful sheath as easy indication, use

Local Area Network

additional outer jacket wrapping protect the pigtails also ease to manage.

Wall Mount Box Premium Line Wall Mount Fiber Optic Box is used for the direct termination of fibers. The rear section accommodates cable entry and protects against taking out the cables. Box includes two separate sections for fusion splice trays and for routing optical connecting modules to the equipment. The Premium Line four-rack space fiber optic enclosure contains all of the features of the two-rack space model, but with additional capacity to manage fiber counts up to 144. Cable entry/exit feature utilizes a flexible grommet seal, which is cut at time of installation to accommodate the desired cable diameters for entry and exit points. These grommets provide a dust & debris barrier during and after installation. Wall Mount Box PART NO. 251011240 251012240 251011480 251012480

DESCRIPTION Premium Line 24 Port SC Wall Mount Fiber Optic Box without Adapters Premium Line 24 Port ST Wall Mount Fiber Optic Box without Adapters Premium Line 48 Port SC Wall Mount Fiber Optic Box without Adapters Premium Line 48 Port ST Wall Mount Fiber Optic Box without Adapters

- I/13 -

12 Pack Pigtail PART NO. DESCRIPTION 223513L SC/UPC 12 Pack Pigtail, SM 9/125 221513L SC/UPC 12 Pack Pigtail, MM 62.5/125 222513L SC/UPC 12 Pack Pigtail, MM 50/125 224513L SC/UPC 12 Pack Pigtail, OM3 50/125 223543L LC/UPC 12 Pack Pigtail, SM 9/125 221543L LC/UPC 12 Pack Pigtail, MM 62.5/125 222543L LC/UPC 12 Pack Pigtail, MM 50/125 224543L LC/UPC 12 Pack Pigtail, OM3 50/125 223523L ST/UPC 12 Pack Pigtail, SM 9/125 221523L ST/UPC 12 Pack Pigtail, MM 62.5/125 222523L ST/UPC 12 Pack Pigtail, MM 50/125 224523L ST/UPC 12 Pack Pigtail, OM3 50/125 223533L FC/UPC 12 Pack Pigtail, SM 9/125 221533L FC/UPC 12 Pack Pigtail, MM 62.5/125 222533L FC/UPC 12 Pack Pigtail, MM 50/125 224533L FC/UPC 12 Pack Pigtail, OM3 50/125 “L” as a substitute for length: 010 = 1 m 020 = 2 m 030 = 3 m 050 = 5 m 070 = 7 m 100 = 10 m Other length, type, UPC/APC, LSOH sheath upon request

- I/14 -

Fiber Optic Solution

re-open. The front left side cable management bar design, ease for patch

Fiber Optic Solution

www.premiumline-cabling.com

Connectivity Fiber Optic Patch Cord Fiber optic patch cords are suited for equipment jumper cable, cross connects, and work area connections. All patch cords are 100% factory tested to ensure performance to TIA/EIA-568-B-2, ISO 11801:2002 and EN 50173-1 standards. With complete connector range of SC, ST, LC, FC, MTRJ, and also the different mode of fiber cables, consists of various combination for all-field applications.

Mechanical Test

Additional Loss

Mating Durability: Min.1000 times

≤0.1 dB

Cable Retention:100 N, 120 s

≤0.2 dB

Strength of Coupling Mechanism: 40 N, 120 s

≤0.1 dB

Drop Test: 1.5 m, 5 times

≤0.2 dB

Vibration: 10-500Hz,1.5mm amplitude

≤0.1dB

Temperature Test

Additional Loss

Cold Environment Storage: -40 °C, 96 h

≤0.2 dB

High Temperature Storage: +85 °C, 96 h

≤0.2 dB

Temperature Change: -40 °C ~ +85 °C, 20 Cycles

≤0.2 dB

Damp Heat: +25 °C ~ +65 °C, 93%RH,100 h

≤0.2 dB

Fiber Optic Patch Cord

Connector Mechanical Characteristics & Cord Performance

PART NO.

DESCRIPTION

213511L

SC-SC Duplex Sigle Mode Patch Cord, 9/125

211511L

SC-SC Duplex Multimode Patch Cord, 62.5/125

212511L

SC-SC Duplex Multimode Patch Cord, 50/125

214511L

SC-SC Duplex Multimode Patch Cord, OM3 50/125

213522L

ST-ST Duplex Sigle Mode Patch Cord, 9/125

211522L

ST-ST Duplex Multimode Patch Cord, 62.5/125

212522L

ST-ST Duplex Multimode Patch Cord, 50/125

214522L

ST-ST Duplex Multimode Patch Cord, OM3 50/125

213533L

FC-FC Duplex Sigle Mode Patch Cord, 9/125

211533L

FC-FC Duplex Multimode Patch Cord, 62.5/125

212533L

FC-FC Duplex Multimode Patch Cord, 50/125

Type

FC

ST

SC

LC

MTRJ

214533L

FC-FC Duplex Multimode Patch Cord, OM3 50/125

Connector Ferrule diameter

2.5 mm

2.5 mm

2.5 mm

2.5 mm

2.45 × 2.2mm

≤0.3 dB

≤0.2 dB

≤0.2 dB

≤0.3dB

LC-LC Duplex Sigle Mode Patch Cord, 9/125

IL

≤0.3 dB

213744L

≥45 dB

≥45 dB

≥45 dB

≥45dB

LC-LC Duplex Multimode Patch Cord, 62.5/125

PC

≥45 dB

211744L

UPC

≥50 dB

≥50 dB

≥50 dB

≥50 dB

≥50 dB

RL

≥60 dB

≥60 dB

≥60 dB

≥60 dBv

≥60 dBv

Working Temperature

-20°C ~ +70°C

-20°C ~ +70°C

-20°C ~ +70°C

-20°C ~ +70°C

-20°C ~ +70°C

Repeatability

≤0.1 dB

≤0.1 dB

≤0.1 dB

≤0.1 dB

≤0.1 dB

APC

- I/15 -

212744L

LC-LC Duplex Multimode Patch Cord, 50/125

214744L

LC-LC Duplex Multimode Patch Cord, OM3 50/125

“L” as a substitute for length: 010 = 1m 020 = 2m 030 = 3m 050 = 5m 070 = 7m 100 = 10m Other length, UPC/APC, simplex, LSOH sheath upon request

- I/16 -

Fiber Optic Solution

Patch Cord Characteristics

Fiber Optic Solution

www.premiumline-cabling.com

FTTX

FTTH Cable As the increasing demand on the communication transmission and exchange capacity, traditional copper based access solutions will not comply with the request of high bandwidth and longer distance. Also, with

Connectivity

the maturity fiber optic premise network & protocol implementation and developing, like 1G-EPON, 10G-

Adapter

EPON, GPON, the fiber trend is not a far future anymore. Fiber to the home (FTTH), the optic fiber directly links the multi-subscribers to the LAN with real high Premium Line provides fiber optic adapters including ST, SC, LC and MT-RJ. All adapters produce with a zirconia sleeve for universal applications (MM/SM).All SC, LC and MT-RJ adapters are provided with retaining clips for

bandwidth provision. As the final access to the subscriber, Premium Line FTTH low bending loss drop flat series cables are aimed design for this high bandwidth network. The excellent optic performance with competitive price is your right choice.

easy, snap-in mounting. And performance meets with TIA/EIA 568-B.3 standard. Adapter

Connectivity

Sheath

Optic Fiber

Strength Member(FRP)

Structure & Environmental Characteristics Material Diameter Material / Color

Peripheral Strength Member

Fiber Optic Connector

Sheath Operating Temperature

FRP 0.5 mm LSOH / Black -20°C ~ +60°C

Fiber Optic Connector PART NO. 232120158 232220154 232120458 232220454 232120250 232220250

DESCRIPTION SC/PC MM Connector, Crimping, 3.0 mm SC/PC SM Connector, Crimping, 3.0 mm LC/PC MM Connector, Crimping, 3.0 mm LC/PC SM Connector, Crimping, 3.0 mm ST/PC MM Connector, Crimping, 3.0 mm ST/PC SM Connector, Crimping, 3.0 mm

Mechanical Characteristics Tensile Strength

Fiber Count

Outside Diameter (mm)

Cable Weight (kg/km)

Short term (N)

Long term (N)

2

3.2 × 2.0

9.0

80

40

Crush Resistance

Bend Radius

Short Term Long Term (N/100 mm) (N/100 mm) 2000

1000

Static (mm)

Dynamic (mm)

15

30

Optical Performance

Connectivity Zip-cord

Ideal construction for field termination with bulk connector, for any length or

Uncabled Fiber Macrobending Loss Radius Number of Turns Max. at 1550 nm (dB) Max. at 1625 nm (dB))

G652D 30 100 0.1

G657A1 15 10 10 1 0.25 0.75 1.0 1.5

15 10 0.03 0.1

G657B 10 1 0.1 0.2

7.5 1 0.5 1.0

pigtails or patch cords; available for direct premise cabling purpose as well. FTTH Cable Optic Fiber Coating Buffer Non-metallic Strength Memb Jacket

Zip-cord Size 3.0×6.1 2.0×4.1

9/125

50/125

62.5/125

50/125(OM3)

261522030 261522020

261532030 261532020

261512030 261512020

261542030 261542020

- I/17 -

PART NO. DESCRIPTION 261422002 FO ID Cable, FTTH w/Two FRP Strength Members, Flat Type, SM9/125(G652D), 2C, LSOH 261462002 FO ID Cable, FTTH w/Two FRP Strength Members, Flat Type, SM9/125(G657A), 2C, LSOH 261472002 FO ID Cable, FTTH w/Two FRP Strength Members, Flat Type, SM9/125(G657B), 2C, LSOH As premises complex corner-bending situation, to conquer and avoid bending loss, Premium Line provides G652D, G657A, G657B fibers for your option.

- I/18 -

Fiber Optic Solution

PART NO. DESCRIPTION 231111108 SC/PC Duplex MM Adapter, Zirconia Ceramic Sleeve, Beige 231211104 SC/PC Duplex SM Adapter, Zirconia Ceramic Sleeve, Blue 231411106 SC/APC Duplex SM Adapter, Zirconia Ceramic Sleeve, GREEN 231111408 LC/PC Duplex MM Adapter, Zirconia Ceramic Sleeve, Beige 231211404 LC/PC Duplex SM Adapter, Zirconia Ceramic Sleeve, Blue 231411406 LC/APC Duplex SM Adapter, Zirconia Ceramic Sleeve, GREEN 231121200 ST/PC MM Adapter, Zirconia Ceramic Sleeve 231221200 ST/PC SM Adapter, Zirconia Ceramic Sleeve 231121310 FC/PC MM small D-flange adapter, Zirconia Ceramic Sleeve 231221310 FC/PC SM small D-flange adapter, Zirconia Ceramic Sleeve Other type, simplex, APC upon request

Fiber Optic Solution

www.premiumline-cabling.com

Fusion Splicer Premium Line core alignment fusion splicer can make the whole process of fiber’ s fusion be finished in 25 seconds automatically. LCD color monitor makes each process of fiber fusion clear and multi-languages

FTTX

make users operate easily. Because of small bulk, light weight and AC/DC power supply, it is the same with the project and maintenance of telecommunications, cable TV, railway, petrochemistry, electric power, army,

FTTD Wall Box

police and scientific research organizations.

FTTD- fiber to the desktop, Premium Line featured FTTD wall box is ideal design to support extend FTTH network direct to your desktop!

Features: ◎ 9 Sec fusion ◎ Strong anti-dust capability

Features:

◎ Auto check fiber end-face

◎ Standard 86×86 size and quality material in use,

Tube Heater

◎ High performance 5” LCD multicolor display

◎ Side adapter position to avoid direct eye contact

Handle

◎ Auto parameter adjusting ◎ RS-232 interface

◎ Inner cable routing radius over 20mm, good for

◎ Simultaneous X and Y views

additional loss control

Panel Keyboard

Specifications:

◎ 2 side paths for FTTH drop flat cable

◎ Applicable Fiber: SM,MM,DS,NZDS,EDF & EXF fiber

◎ 2 adapter positions

RS232 Video Output

◎ Fiber cleaved length: 16mm(Standard)

Lock

◎ Average fusion loss : 0.02dB(SM),0.01dB(MM),0.04dB(DS) ◎ Storage of splice result: 8000 splice result

FTTD Wall Box PART NO. 252311021

DESCRIPTION Fiber Optic FTTD Wall Box, 86×86, SC Simplex

Swith and Plugs

◎ Working Mode : Auto/Manual

LCD Monitor

◎ Working condition: Temp. -10 °C~+50 °C,Humidity 0 ~ 95%,

Battery/DC adaptor/AC adaptor

(RH),altitude 0~4000meter ◎ Heat : 40Sec(Standard),Selectable

FTTX

◎ Power Supply: AC:176 ~ 264V,47/63Hz,DC:10.5 ~ 15V,10Ah ◎ Measurement : 160mm(W)×180mm(D)×202mm(H)

Fiber Optic Faceplate

◎ Weight :4.5Kg incl. built-in battery

86*86 Size Premium Line Fiber optic faceplate is in standard 86*86 design, it’ s available to secures to any surface, drywall, baseboard, and even modular furniture. It’ s available 2 types, SC duplex (LC quad), ST dual ports, 45°adapter plug- in/out angle avoid any hurt from light.

Features: ◎ 100% compatible with standard 86*86 back box ◎ Adapter can be snapped in and out easily ◎ Comes with hidden mounting screws and clear outlet ID labels

Fiber Optic Strip Tool

◎ Apply UL-94V-0 high-impact, fire-retardant ABS

Fiber Optic Cleaver

resin ◎ RoHS complaint

Fusion Splicer Fiber Optic Faceplate PART NO. 252021018 252012028

DESCRIPTION Fiber Optic SC Duplex Faceplate, 86×86, 1 Port, RAL1013 Fiber Optic ST Simplex Faceplate, 86×86, 1 Port, RAL1013

- I/19 -

PART NO. 551011000 252012028 552000000 244600000

DESCRIPTION Fusion Splicer, 160 mm×180 mm×202 mm Fiber Optic Strip Tool, for 900 um Tight Buffer and 250 um Coating Fiber Optic Cleaver Splice Heat Shrink Tube, 60×3.0 mm

- I/20 -

Fiber Optic Solution

◎ Wall mountable or other surface attach

Wind Protector

Note:

References Premium Line products had been installed at more than 500 projects worldwide, below a short reference list of some of them. • Commerzbank Manhattan, New York - USA • Millenium Tower Dubai - UAE • International Airport - Egypt • Administration of President of Russian Federation - Russia • Agentur für Arbeit - Germany • Mercedes-Benz Financial Services - Singapore • Police Abu Dhabi - UAE • Ministry of Education - KSA • Maldives Hilton at Rangali Island - Maldives • Hospital Universiti Kebangsaan - Malaysia

• ETelecare Call Center (Dell) - Philippines • Unilever Italia Rome - Italy • Alcatel Lucent Headquarter - Turkey • Exxon Mobil - Qatar • HSBC Training Center - Sri Lanka • Ministry of Education - Egypt • Empire Bank New York - USA • Palazzo die Congressi di Roma - Italy • Siam Nissan Bangkok - Thailand • Electricity Generating Authority of Thailand - Thailand

Your expert for data center cabling ! When it comes to data centers, structured cabling is the first essential building block. Your right decisions on this will return you the most cost-effective data center deployment and time saving solutions. Data centers - as the central nerve centers of enterprises & buildings, will encounter relentless increases on the cost and fast expanding requirements of data network cabling and power consumption but in limited space. Planning and designing is mission-critical at data center facilities, building the infrastructure on which the entire enterprise will rely. The physical infrastructure is the foundation of your business and its strength and reliability is crucial. Premium Line is your dedicated data center cabling team to provides perspectiveness solution on your data center design & operation.

Premium Line Data Center solutions assure you: • Fast deployment and accurate moves, adds, and changes • Standards based open systems • High performance and high bandwidth with growth factors incorporated • Support for 10G and higher speed technologies • Support for convergence with growth factors incorporated • High quality, reliability and scalability • High capacity and density • Efficient allocation of space • 25 years system warranty installation • Initial investment protection

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF