PNMSj on Windows Virtual Server Installation Manual

NWD-162569-02E

P N M S

ASOLINK

ETWORK

PNMSj on Windows Virtual Server Installation Manual

ANAGEMENT

YSTEM

NEC Corporation Copyright © 2013

NWD-162569

Table of Contents 1

INTRODUCTION ..................................................................................................................... 1

2

INSTALLATION SEQUENCE ............................................................................................... 2

3

Server Machine Configuration ................................................................................................ 3

4.

3.1

BIOS Setting ....................................................................................................................... 3

3.2

ESXi Installation ................................................................................................................ 4

Client Setting ............................................................................................................................. 6 4.1

vSphere Client installation ................................................................................................ 6

4.2

ESXi Setting........................................................................................................................ 9

4.2.1

Create Storage .......................................................................................................... 10

4.2.2

Time Configuration .................................................................................................. 11

4.2.3

Create Virtual Machine ........................................................................................... 12

4.3

OS installation(Virtual Machine) ................................................................................... 22

4.4

VMware Tools installation on Virtual machine ............................................................ 24

5.

Install PNMSj application ...................................................................................................... 25

6.

Configure PNMSj Server setting ........................................................................................... 25

-i-

NWD-162569

1

INTRODUCTION

This document describes the Virtual machine setting procedure for PNMSj.

NOTE Refer to "PNMSj System Requirement Manual" for the recommendation size of heap memory.

-1-

NWD-162569

2

INSTALLATION SEQUENCE

Start

ESXi Installation

vSphere Client Installation

ESXi Setting

OS Installation

PNMSj application installation.

PNMSj server configuration

End

-2-

NWD-162569

3 3.1

Server Machine Configuration BIOS Setting

On BIOS setting window, check whether “Virtualization Technology” option is enabled. (1) Power on the server, then press the F2 button while BIOS starting up. NOTE BIOS setting start-up key may differ according to the environment.

(2) On BIOS setting window, Enable the “Virtualization Technology” option.

-3-

NWD-162569

3.2

ESXi Installation (1) Download the software from the following URL. Account Registration is required before downloading. http://www.vmware.com/ Software name: VMware ESXi 5.1 Write to DVD device after downloading. (2)

Insert the VMware ESXi5.1 DVD ROM to the server machine.

(3)

On the [ Welcom to the VMware ESXi Installation ] window. Press the Enter key to continue.

(4)

On [End User License agreement] window. Press the F11 key(Accept and Continue).

(5)

On [Select a Disc to Install or Upgrade] window. Select the folder to be installed and press the Enter to continue.

(6)

On [Please select a keyboard layout] window. Select the US default and press the Enter to continue.

(7)

On [Please enter a root password] window. Input your Root password and Retype it to confirm. Press the Enter key to Continue.

(8)

On [Confirm install] window. Press the F11 key(Install).

(9)

Eject the DVD media then press Enter to Reboot. After [Installation Complete] window is appeared. Eject the DVD media then press Enter to Reboot .

(10) Press the F2 key after rebooting. (11) Input the password that you have created in step 7 then press Enter. (12) Select the Configure Management Network then press the Enter. (13) Select the Network Adapters then press the Enter. (14) Specify one of the NIC to be used by pressing Space key, then press Enter to continue. NOTE A DIFFERENT NIC ASSIGNED FOR NMS MUST BE SELECTED. IN ADDITION TO THIS, ONE PNMSJ SYSYEM REQUIRES ONE SEPARATE NIC.

-4-

NWD-162569

(15) Select IP Configuration then press Enter. (16) Select “Set static IP address and network configuration”, press the Space key(Mark Selects), then input the IP address/Subnet Mask/Default gateway accordingly. (17) Press the Esc key to open ” Configure Management Network: Confirm” window after confirming that there are no mistakes in the setting value. Press “Y” to save the setting.

-5-

NWD-162569

4. Client Setting vSphere Client installation is required to manage Virtual machine. 4.1

vSphere Client installation

(1)

Download the software from the following URL. Account Registration is required before downloading. http://www.vmware.com/ The software name: VMware vSphere Client 5.1 Write to the device after downloading.

(2)

Insert the device and double click .exe file.

(3)

Select the Language and click [OK].

(4)

Click [Next >].

-6-

NWD-162569

(5)

Click [Next >].

(6)

Select “I agree to the terms in the license agreement”, then click [Next >].

-7-

NWD-162569

(7)

Select the installation folder then click [Next >].

(8) (9)

Click [Install]. Click [Finish] to complete installation.

-8-

NWD-162569

4.2

ESXi Setting

Perform initial setting by connecting VMware vSphere Client and ESXi Server. (1) Start the VMware vSphere Client. (2) Login in by typing “IP address / User name / Password used in the chapter 3.2 ESX installation.

Due to guaranteed SSL certification is required in some case, security warning message may appear required.

-9-

NWD-162569

4.2.1 Create Storage When there is no Datastore, please create it by following procedure. (1)

Slect Home  Inventory  Inventory. Select “Storage” in Configuration Tab, then Click Add Storage.

(2) (3) (4) (5) (6) (7)

Select “Disk/LUN” then [Next >]. Specify the location for “Data store” then click [Next >]. Select VMFS-5, then [Next >]. Confirm disk layout, then [Next >]. Input the name for Datastore, then [Next >]. Specify the capacities/sizes according the System Requirement Manual, then click [Next >].

- 10 -

NWD-162569

4.2.2 Time Configuration (1)

Select Home  Inventory  Inventory. Select “Time Configuration” in Configuration Tab, then click on Properties.

(2)

Set the date and time for the host in the vSphere Clinet’s local time. Click [OK].

- 11 -

NWD-162569

4.2.3 Create Virtual Machine (1)

Select Home  Inventory  Inventory. Select “Networking” in Configuration Tab. Click on Add Network.

(2)

Select “Virtual Machine”, then click [Next >].

- 12 -

NWD-162569

(3)

Select NIC, then click [Next >].

(4)

Input the name for Network Label, then [Next >].

- 13 -

NWD-162569

(5)

Click [Finish].

(6)

Right click on ESXi server IP Address then select New Virtual Machine.

- 14 -

NWD-162569

(7)

Select “Custom” then click [Next >].

(8)

Input the Virtual Machine name, then click [Next >].

- 15 -

NWD-162569

(9)

Select a storage, then click [Next >].

(10) Select “Virtual Machine Version: 8”, then click [Next >].

- 16 -

NWD-162569

(11) Select the following, then click [Next >]. Guest Operating System: Windows Version: Microsoft Windows Server 2008 R2 (64-bit)

- 17 -

NWD-162569

(12) Set as following, then click [Next >]. Number of virtual sockets: 1 Number of cores per Virtual sockets: The number into which the choice number of possible cores was divided by the number of virtual machines.

(13) Specify the memory size by following System Requirement Manual, then click [ Next > ].

- 18 -

NWD-162569

(14) Set as following then [Next >]. NIC: 1 Network: Select the Network Label that you have created in step (4) Adapter: VMXNET3 Connect at Power On: ON

(15) Select “LSI Logic SAS” then click [Next >].

- 19 -

NWD-162569

(16) Select “Create a new virtual disk” then click [Next >].

(17) Set as following then click [Next >]. Capacity: Follow the Sysmte Requirement Manaul Disc Provisioning: Thick Provision Eager Zeroed Location: Store with virtual machine

- 20 -

NWD-162569

(18) Leave as Default, click [Next >].

(19) Click [Finish].

- 21 -

NWD-162569

4.3

OS installation(Virtual Machine)

OS(Windows Server 2008 R2) installation from vSphere Client (1)

Select the Virtual machine that configured in section “4.2 ESXi setting” above, right click on Virtual Machine  select Edit Setting.

(2)

Select “CD/DVD drive 1” in Hardware Tab, Set as following and click [OK]. Device Type: Host Device Device Status: Connect at power on

- 22 -

NWD-162569

(3) (4)

Insert the OS media to the server. Select the Virtual machine that configured in section “4.2 ESXi Setting”. Right click on Virtual Machine then select “Open Console”.

(5)

Click the Power on button OS installation will be started.

- 23 -

NWD-162569

4.4

VMware Tools installation on Virtual machine (1)

From the console of Virtual machine, select Virutual Machine  Guest  Install/Upgrade VMware Tools.

(2)

Execute “setup64.exe”.

- 24 -

NWD-162569

5. Install PNMSj application Install the PNMSj application following the procedures mentioned in the PNMSj Installation Manual.

6. Configure PNMSj Server setting Follow the procedures mentioned in the Server and Daemon setting manual.

- 25 -