PMS A21S

ATTACHMENT -B ATTACHMENT3

PIPING MATERIALS CLASSIFICATION CLASSIFICATION

6249 EPCM

WORK NO.

<

4

>

A21S 0

REV. MARK ISSUE DATE

SERVICE

1

(A54)(A59)

04-DEC-09 30-MAR-10

PAGE:

NON IBR

BRA NCH

C.A.(mm)

0.0

P-T

TEMP.

PWHT

NO

RATING

PRESS.

0

80

10

10

(C)

Kg/cm2G

6249-T7

REDUCER

1

OF

1

6249-R3

 ____________________________________________________________________________________________________________________ 

NOM.SIZE(NPS) MATERIAL

PRODUCT

END

WALL THICK

REF. TO

NOTE

REV

 ______________________________________________________________________________________________________________________ 

PIPE 1 - 6

GRE(RTRP,ASTM D2996, TYPE1,GR.1,CL.F)

ELBOW 1 - 6

GRE(RTRP,ASTM D2310,GR.1,CL.F) TEE/REDUCER/CAP 1 - 6 GRE(RTRP,ASTM D2310,GR.1,CL.F) COUPLER 1 - 6 GRE(RTRP,ASTM D2310,GR.1,CL.F)  ADAPTOR 1 - 6 GRE(RTRP,ASTM D2310,GR.1,CL.F)

TB/TS

BY MFR

BY MFR

(A60)

TB

BY MFR

BY MFR

(A60)

TB

BY MFR

BY MFR

(A60)

TB

BY MFR

BY MFR

(A60)

TB

BY MFR

BY MFR

(A60)

 ____________________________________________________________________________________________________________________ 

NOM.SIZE(NPS) MATERIAL

CLASS

TYPE-FACE

THICK

REF. TO

NOTE

REV

 ______________________________________________________________________________________________________________________ 

FLANGE 1 - 6

GRE(RTR,ASTM D4024,GR.1)

BLIND FLANGE 1 - 6 GRE(RTR,ASTM D4024,GR.1) GASKET 1 - 6 NEOPRENE(10N) BOLT/NUT 1 - 6 A193GR.B7/A194GR.2H

1 50

TB-FF

ASME B16.5

(A57)(A58)

1 50

FF

ASME B16.5

(A57)(A58)

1 50

FF

ASME B16.21

(A57)

1 50

S.BOLT/HEX.NUT +WASHER

BY RTRP MFR

(A55)(A56)

3 .0 T

 ____________________________________________________________________________________________________________________ 

NOM.SIZE(NPS) BODY/TRIM

CLASS END

TYPE

VALVE NO.

REF. TO

NOTE

REV

 ______________________________________________________________________________________________________________________ 

GATE VALVE 1 - 6

A351GR.CF8/304

15 0

RF

BB,OS&Y

5 13 49

API 600

 ____________________________________________________________________________________________________________________ 

NOTES : (A54) Min. size shall be limited to 1". (A55) Bolts for RTRP/GRE flanges to be provided with C.S washers at both side. (A56) The required bolt length shall be calculated based on the actual RTRP/GRE flange thickness according to the manufacturer's information. (A57) All inline flanged components and companion flanges of equipment and metallic piping shall have a flat face gasket seating area. (A58) Flange to be drilled according to ASME B16.5, CL.150. (A59) All RTRP/GRE piping to be UV(Ultra Violet) resistant. (A60) To be connected by Adhensive Bonding (Restrained Type Joint).

SERVICE: TREATED EFFLUENT WATER., HIGH TDS EFFLUENT WATER