Piping Engineering- PROCESS PIPING

Suvidya Institute of Technology Pvt. Ltd.

Contract Review PIPING ENGINEERING

An ISO 9001:2008 Certified Organisation

BATCH NO. 091

Name of the Applicant :

…………………..…....….…… Surname

….…………………………… ……….………….………. First Name Middle Name

Eligibility

:

Degree/ Diploma in Mechanical/ Chemical/ Production Engg. (Fresher/ Experienced)

Duration

:

2nd July, 2012 to 30th September, 2012

First lecture

:

2nd July, 2012 at 8.00 am

Timing

:

Tuesday to Sunday – 8.00 am to 5.30 pm

Last date of Admission :

25th June, 2012

Fees

` 53,000 + 12.36 % Service Tax extra

:

Training Program Syllabus: Basic subject preparation •

Introduction to: Piping Engineering and role of Piping engineer in various fields, Industry functioning and plat overview, Function of process equipment and their piping requirement.

•

Basic process requirement of plant/project

•

Detailed study of: Various piping system, Procedure of designing piping system, Material selection for various process services, Piping elements, their joining methods, Relevant Standards/ Codes, their importance and applications, Valves & Nozzles.

•

Document Study: Use of vendor data in design, Various documents required for plant design.

•

Basic information on welding, its testing and inspection.

•

Preparation of: Piping material specification, Valve specification and data sheets, Nozzle orientation of process equipment, Bill of Material at various stages, Isometric drawings and final MTO.

•

Development of: Equipment layout, Piping layout, Industrial Plot Plan.

required before joining this Training Program.

• Strength of Material • Applied Mechanics • Trigonometry • Engineering Drawing • Introduction to Physical Metallurgy Author : Avener

•

Study of Analysis System using CAESAR II software, pipe supports & loop calculations.

•

Plant Design Management System (PDMS) Software

•

Site Visit will be arranged at industrial plant either in shut down or not working conditions.

•

MOC Interview.

Suvidya Institute of Technology Pvt. Ltd. 18/140, Anand Nagar, Nehru Road, Vakola, Santacruz (East), Mumbai, Maharashtra - 400 055 INDIA Phone : (022) 26682290, 09821569885, E-mail : [email protected], Web Site : www.suvidya.ac.in

F/023/04

This document is the property of ‘Suvidya Institute of Technology Pvt. Ltd. and unauthorised disclousre to any third party or duplication is not permitted

Page 1of 7

RULES & REGULATIONS 1. Admission & Enrolment: a. b. c. d.

Admission is given strictly on first-cum-first basis. Admission forms to be collected from SIT office or downloaded from website www.suvidya.ac.in. Fill-in all the details and courier it with all the required documents attached. All the documents required for admission should reach to us 1 week prior to commencement of the Training Program. e. Candidates without any relevant qualification but having experience of more than 5 years shall be given admission on submission of experience letter/ declaration. f. Your admission shall be confirmed only after verification of all completed documents and receipt of fees. g. Assignment for basic engineering will be handed over/ emailed to you after admission procedure that will be required to be submitted on the first lecture (only for the Piping Engineering Training Program). h. Outstation students will reach Mumbai at least one day prior to the start of Training Program. 2. Accommodation: a. Candidate who requires accommodation shall confirm through email or in writing. b. As per the requirement, accommodation may be arranged in Hotels or Dometry provided by SIT. c. Accommodation charges shall be informed to students that will be extra, at actual. 3. Mode of Payment: a. 100% in advance at the time of admission, along with the duly completed admission form. b. Demand Draft/ Cheque of any bank in favor of ‘Suvidya Institute of Technology Pvt. Ltd.’ payable at Mumbai, with name, Training Program & batch no. written on the reverse. c. Penalty of ` 200/- will be charged, in case of Cheque return. d. Payment may be made thru NEFT transfer to ‘Suvidya Institute of Technology Pvt. Ltd.’ Axis Bank Account. e. Find account details below. Account No. 911020002988600 IFSC code - UTIB0001244 MICR code – 400211082 4. Documents required for Admission: a. b. c. d. e. f.

Admission form duly filled, incomplete forms will not be accepted. Attested/ Self-attested photocopies of Mark Sheets for all Years/ Semesters. Attested/ Self-attested photocopy of Degree/ Diploma Certificate. 4 Nos. of passport size photographs (size 3.0 cm X 2.5 cm) with name written on the reverse. Attested/ Self-attested Photocopy of Identity Proof and Address Proof i.e. Passport, UID (Aadhar Card), Voters ID Card, Driving License, Ration Card and Pan Card. In case of ‘Self-attested’ original documents will be verified at the time of admission.

5. Admission Transfer : a. Admission transfer fees • Upto last day of admission : Nil • After the last date of admission & one day prior to the start of : 10% of total fee Training Program • On the first day of the Training Program and onward : 20% of total fee b. Admissions are strictly non-transferable on any other name and for any other Training Program. c. Admission will be transferred only on receipt of Application through mail or letter. d. Transfer of admission will be allowed for consecutive two batches. e. In case of transfer it is compulsory to attend the new batch from day first till last, in such cases performances of previous batch like unit test, assignment, attendance will not be considered.

Signature _________________________

F/023/04 This document is the property of ‘Suvidya Institute of Technology Pvt. Ltd. and

unauthorized disclousre to any third party or duplication is not permitted

Page 2of 7

6. Admission Cancellation: a. Admission Cancellation charges • Upto last date of admission : 15% of total fee • After the last date of admission & one day prior to the start of : 30% of total fee Training Program • On the first day of the Training Program and onwards : Not refundable, at any circumstances b. Admission will be cancelled only on receipt of Application through mail or letter. c. Admission shall be cancelled, where students fail to attend first three lectures or fail to inform for absenteeism. 7. Stationery required: a. b. c. d. e. f.

Scientific Calculator Pen (Blue, Red and Green) Highlighter (Yellow) Pencil 0.5mm and Eraser Compass Box with geometrical accessories Additional stationery may be purchased from SIT, only in the break time.

8. SIT shall provide: a. b. c. d.

Training Material Case Study Material SIT Notebook - 1 No. Pen (Blue) - 1 No.

9. Attendance: a. Attendance will be noted only through Biometric Finger Scan Reader. Ensure to complete your biometric finger scan registration on first day of batch from the Training Co-ordinator. b. Manual attendance will not be taken into account. c. In case of any problem faced during punching, kindly inform to your Training Co-ordinator, in writing immediately. d. 3 late comings will be marked as one absent. e. Late comers will be allowed to enter the training room only after half an hour of lecture start time. f. You will be entitled for 3% bonus marks and a ‘Certificate of Appreciation’ for 100% attendance. g. Students only with and above 75% of attendance will be allowed to appear for the final examination. h. Students below 75% attendance will be transferred to next batch with applicable transfer fees. i. In case of absenteeism, students will collect notes from other classmates and lecture will not be repeated at any circumstances. If required students may attend the additional lecture with other ongoing batch, on payment of ` 500/- per lecture. 10. Unit Test & Assignment criteria: a. Unit Tests & Assignments shall not be repeated, for any reason, whatsoever. b. Assignments shall be dropped in the ‘Assignment Box’ with proper assignment covering page. Complete information shall be filled on the covering page of the assignment. c. Assignments shall be completed within the time period given by the Faculty. d. Assignments submitted late shall be checked without giving any marks. e. Assignments may be submitted personally, through friends or through email. In case of email, hard copy is required to be submitted later. f. Assignments shall be collected within a month from completion of course.

Signature _________________________

F/023/04 This document is the property of ‘Suvidya Institute of Technology Pvt. Ltd. and

unauthorized disclousre to any third party or duplication is not permitted

Page 3of 7

11. Final examination: a. b. c. d. e.

Students only with and above 75% of attendance will be allowed to appear for the final examination. Students unable to appear for the examination shall inform the Training Co-ordinator. Grade of certificate is based on the student’s average score in Unit Test, Assignment and Final Exam. Weightage: Unit Test - 30%, Assignment - 15%, Final Exam - 50%, Attendance - 3% and Discipline - 2%. Criteria for Grade : Distinction - 75% and Above I Class - 60% to 74.99% II Class - 50% to 59.99% No Certificate - 49.99% and less

12. Re – examination: a. Repeaters will be allowed to appear for re-exam with the subsequent batch, no separate exams will be held. b. Repeater as well as student unable to appear for final exam will be allowed to re-appear for examination with additional fees of ` 750/- + 10.3 % Service Tax extra. c. Students appearing for re-exam will not be entitled for I Class. d. Students shall be allowed to appear for the final exam only for 2 attempts, excluding same batch exam. e. Students failing in the 3rd attempt may apply for re-admission. 13. Class improvement examination: a. Students passing with second class in the first attempt shall be given opportunity of ‘Class Improvement’ to re-appear for examination with additional fees of ` 750/- + 10.3 % Service Tax extra. b. Student interested to re-appear shall surrender their earlier certificate. c. Class Improvement will be allowed only once and Grade will be updated based on the performance in the class improvement test. 14. Issue of Certificate: a. Graduate Engineer will be awarded ‘Post Graduate Diploma’ and Diploma holder with ‘Post Diploma’ certificate, irrespective of the ‘Training Program’ content. b. Candidates without any relevant qualification but having experience of more than 5 years shall be awarded ‘Diploma’ certificate. c. Certificates are awarded only to the students, after successfully completing the Training Program. d. Students shall collect certificates within one month of convocation and those unable to collect personally may pay courier charges for dispatch at given address, subject to students’ risk. e. Certificate may be issued in absence of student, but only on submission of authority letter. f. Duplicate certificate, stamped ‘Duplicate’ may be issued only on payment of additional charges of ` 250/-. g. Best performing students are awarded with Medals - 1st Ranker - Gold Medal nd 2 Ranker - Silver Medal rd 3 Ranker - Bronze Medal 15. Placement: a. SIT shall be responsible for providing ‘Placement Assistance’ only. b. Your technical competency, communication skills and attitude would be main capabilities you would be required to work on for better placements. c. Opportunities to appear for interviews will be given to the participants based on your academic performance, performance during the Training Program and mock interviews. d. Advertisements for job opportunities shall be displayed on the Notice Board or sent through email. 16. Co-ordination & Communication: a. No verbal communication will be encouraged to avoid any kind of dispute. b. Students shall drop their suggestions, requirements and feedback only in writing in the ‘Suggestion Box’.

Signature _________________________

F/023/04 This document is the property of ‘Suvidya Institute of Technology Pvt. Ltd. and

unauthorized disclousre to any third party or duplication is not permitted

Page 4of 7

17. Other rules: a. Students are required to complete the Training Program and appear for examination of the same batch. b. SIT shall not be responsible for the completion of course for irregular students. c. Students are requested to inform the Training Co-ordinator for any change in mobile number, email ID or postal address for all communications. d. Change in lecture dates and timings will be informed on Website or vide SMS. e. On demand, full day lectures will be arranged once in a month with advance information to all. f. Site visit will be arranged at industrial plants either in shut down or not working conditions (except for HVAC and offshore engineering). g. Parking is not allowed in front of other gates/ doors, advised to park only in the “PARKING” areas. h. Library facilities are provided subject to its rules and regulations. 18. SIT reserve rights: a. b. c. d. e.

To change the Time Table in case of any unavoidable circumstances. To change the Training Content any time as per the current job requirement. Change in the fee structure without giving any prior notification. To debar students for undisciplined behavior without any prior notification. All legal issue subject to Mumbai jurisdiction.

19. Frequently Asked Questions: a. What do you mean by Oil and Gas Sector? Oil & Gas sector deals with extraction of oil and natural gas from earth. A thick flammable, yellow-to-black mixture of gaseous, liquid, and solid hydrocarbons that occur naturally beneath the earth's surface are separated into fractions including natural gas, gasoline, naphtha, kerosene, fuel and lubricating oils, paraffin wax, and asphalt and is used as raw material for a wide variety of derivative products. Oil and Gas sector is a very important part of our life, 65% of our daily requirements are produced thru this sector like cooking gas, petrol, diesel, etc. There are various companies like Reliance, HPCL, BPCL, ONGC in this business. b. In which field I can work after completion of this course? This training program is designed for EPCM Companies (Engineering, Procurement, Construction and Management) Areas/ fields in which you can work as a….. ● Design Engineer ● Construction Engineer ● Project Manager ● Inspection and Testing ● Erection Engineer ● Commissioning ● Plant Operator ● QA/ QC Engineer

● Project Coordinator ● Site Supervisor ● Maintenance Engineer ● Consultant

You can work in different types of companies like….. • EPC Companies (Engineering, Procurement and Construction) • Design Consultancies • Construction Companies • Inspection and testing companies • Chemical production plants • Pipe manufacturing companies • Fitting manufacturing companies • Valve manufacturing companies • Software support companies • Drafting firms • Erection and commissioning companies • Pump and equipment manufacturing companies • Design verification companies Our students are placed almost in all the companies who are engage in above mentioned business of the “OIL & GAS/ Power Sector in India and abroad. Signature _________________________

F/023/04 This document is the property of ‘Suvidya Institute of Technology Pvt. Ltd. and

unauthorized disclousre to any third party or duplication is not permitted

Page 5of 7

c.

Whether the Training Program is self sufficient without any software training? Yes, this training program is self sufficient to work in EPC companies and to work on related software. Software are only design tools, more important is to have thorough knowledge of the subject that will facilitate to use any software.

d. What is the scope of the training? Oil and gas sector is one of the key catalysts in fuelling the growth of global economy. World's energy needs are increasing fast, warranting a robust demand for oil and natural gas. The share of oil and natural gas in total primary energy demand is 40 percent. The planned investments across the oil and gas value chain includes exploration and production, oil and gas pipelines, petroleum refineries, R-LNG terminals, city gas distribution networks and petrochemical plants. Hence securing good job in industry is definitely possible with thorough knowledge of subject matter. e. What is the advantage of doing training from SIT, compared to other Institutes? Development of skilled manpower is the mission of the SIT and institute strongly believes in quality output and overall development of the engineers which will strengthen engineering sector globally. SIT provides training as per the current job requirements, thru industrial case studies and ensures that students start performing from day one of their job. SIT is highly acknowledged by the Industry and that’s the reason students all over the globe choose SIT for these specialized Training Programs. f.

Whether certification is affiliated to any university or whether this certificate is valid, abroad? SIT is an Autonomous Institute in OIL and GAS sector and not affiliated to any University or Board but highly recognised by the Industry. Institute is an ISO 9001:2008 certified by Bureau of Indian Standards (BIS).

g. Why does SIT provide only job assistance and no guarantee? Getting job solely depends on the performance during the Training Program and the interview. Students thorough with subject knowledge should definitely crack the interview, as industry is in need of skilled manpower. h. What is the percentage of students placed in the industry? Almost 50 to 70% of students are placed in the industry only due to their sincere efforts taken by them. i.

What are the packages normally offered to the fresher in designing field? As a fresher, one should first aim to get the opportunity to work in the field and get exposure of the practical knowledge of subject that will not only obtain experience but also shall help in building confidence. Once confident and with sufficient experience, one can definitely demand for good packages.

j.

Which renowned organizations come to SIT for campus? Almost all engineering companies in the “OIL & GAS/ Power Sector all over India and abroad i.e. Aker Solutions, Petrofac, Toyo Engineering, Tecnimont ICB, etc visit SIT campus for interviews.

k.

Will the past experience in different field altogether, be of any help in future? You can definitely take risk of changing your field but one should be absolutely clear about his/ her path forward. After completing the training one should be ready to work with small consultants and compromise on salary packages.

l.

Do you conduct any Site Visit? How many visits are conducted during the Training Program? There will be site visit only once during the Training Program. Site visit will be arranged at industrial plant either in shut down or not working conditions. (Except HVAC and Offshore Engineering)

Signature _________________________

F/023/04 This document is the property of ‘Suvidya Institute of Technology Pvt. Ltd. and

unauthorized disclousre to any third party or duplication is not permitted

Page 6of 7

CODES OF CONDUCT 1. SIT is a centre of learning & development and known for quality training & ethics, globally. 2. Only those who have potential of learning, self-development and have ability to abide with all the ‘Rules and Regulations’ of the SIT shall enroll for these Training Program. 3. Required to be highly punctual and regular in attending the lectures. 4. Required to wear formal dresses only, Jeans and T-shirts are strictly prohibited. 5. Required to maintain utmost discipline & utter silence in the Training room during the lecture hours. 6. Use of Mobile phones in SIT premises is strictly forbidden. 7. Smoking, chewing-gum/ beetle leaves/ tobacco/ gutka, wearing caps, sun glasses and ear/ head phones is strictly prohibited in and around SIT premises. 8. Student shall take care of SIT property and those causing damage shall be actioned. 9. Required to be polite with SIT staff and all other fellow students and shall avoid needless arguments. 10. Wearing the Identity Card is mandatory and those found without I Card shall be marked absent for the day.

DECLARATION I hereby declare that I have thoroughly read, each and every content of this Contract Review and I agree to abide by all the Rules and Regulations of SIT.

Signature :

_________________________

Date

_________________________

:

Place

:

_________________________

Together We Will Bring New Together we will bring new dimension to Engineering Together We Will Bring NewIndustry Dimensions To Engineering Industry Industry

F/023/04 This document is the property of ‘Suvidya Institute of Technology Pvt. Ltd. and

unauthorized disclousre to any third party or duplication is not permitted

Page 7of 7