PIP PNFS0001 Pipe Supports Details
Short Description
Pipe Support Standards...
Description
June 2005
Process Industry Practices Piping
PIP PNFS0001 Pipe Supports Details
PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice. This Practice is subject to revision at any time by the responsible Function Team and will be reviewed every 5 years. This Practice will be revised, reaffirmed, or withdrawn. Information on whether this Practice has been revised may be found at www.pip.org.
© Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas 78759. PIP member companies and subscribers may copy this Practice for their internal use. Changes, overlays, addenda, or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP.
PIP will not consider requests for interpretations (inquiries) for this Practice.
PRINTING HISTORY June 2005
Issued
Not printed with State funds
June 2005
Process Industry Practices Piping
PIP PNFS0001 Pipe Supports Details Table of Contents 1. Introduction................................. 5 1.1 Purpose ............................................. 5 1.2 Scope................................................. 5
2. References .................................. 5 2.1 Industry Codes and Standards.......... 5 2.2 Other References .............................. 5
LARGE BORE PIPE SUPPORTS DETAILS PNFS0100 – DIRECTIONAL STOP DS-1 (FOR INSULATED PIPE NPS 3 TO NPS 24) PNFS0101 – DIRECTIONAL STOP DS-2 (FOR UNINSULATED PIPE NPS 3 TO NPS 24) PNFS0200 – PIPE GUIDE PG-1 (FOR INSULATED PIPE NPS 3 TO NPS 8) PNFS0201 – PIPE GUIDE PG-2 (FOR INSULATED PIPE NPS 3 TO NPS 8) PNFS0205 – PIPE GUIDE PG-3 (FOR INSULATED PIPE NPS 10 TO NPS 24) PNFS0206 – PIPE GUIDE PG-3-H (FOR INSULATED PIPE NPS 10 TO NPS 24) PNFS0209 – PIPE GUIDE PG-4 (FOR UNINSULATED PIPE NPS 3 TO NPS 12) PNFS0210 – PIPE GUIDE PG-5 (FOR BARE PIPE NPS 14 AND NPS 24) PNFS0212 – PIPE GUIDE PG-6 (FOR UNINSULATED VERTICAL PIPING NPS 3 TO NPS 8) PNFS0213 – PIPE GUIDE PG-7 (FOR UNINSULATED VERTICAL PIPING NPS 10 TO NPS 24) PNFS0214 – PIPE GUIDE PG-8 (FOR INSULATED PIPE NPS 3 TO NPS 6) PNFS0215 – PIPE GUIDE PG-9 (FOR INSULATED PIPING PIPE NPS 8 TO NPS 24) PNFS0250 – PIPE GUIDE CLIPS PGC-1 (ATTACHMENTS FOR GUIDES NPS 8 TO NPS 14) PNFS0251 – PIPE GUIDE CLIPS PGC-2 (ATTACHMENTS FOR GUIDES NPS 16 TO NPS 14) PNFS0252 – VESSEL CLIPS PSVC-1 PNFS0253 – VESSEL CLIPS PSVC-2 PNFS0350 – CANTILEVER SUPPORT OFF VESSEL PS-1 PNFS0351 – KNEE BRACE SUPPORT OFF VESSEL PS-2
Process Industry Practices
Page 1 of 5
June 2005
PIP PNFS0001 Process Industry Practices
LARGE BORE PIPE SUPPORTS DETAILS (continued) PNFS0352 – KNEE BRACE SUPPORT OFF VESSEL PS-3 PNFS0353 – SINGLE KNEE BRACE SUPPORT OFF VESSEL PS-4 PNFS0354 – KNEE BRACE SUPPORT OFF VESSEL PS-5 PNFS0355 – CANTILEVER SUPPORT OFF VESSEL PS-6 (ROUND TYPE CLIPS) PNFS0356 – KNEE BRACE SUPPORT OFF VESSEL PS-7 PNFS0357 – SINGLE KNEE BRACE SUPPORT OFF VESSEL PS-8 (ROUND TYPE CLIPS) PNFS0365 – CANTILEVER BRACKETS PS-16 (FROM ADJACENT STEEL OR VESSEL) PNFS0366 – KNEE BRACED BRACKETS PS-17 (FROM ADJACENT STEEL) PNFS0367 – KNEE BRACED BRACKETS PS-18 (FROM ADJACENT STEEL) PNFS0368 – T-SUPPORT PS-19 (FROM ADJACENT STEEL) PNFS0369 – SINGLE COLUMN BRACKET PS-20 (FROM EXISTING STEEL) PNFS0370 – DOUBLE COLUMN BRACKET PS-21 (FROM EXISTING STEEL) PNFS0371 – SLIDE PLATE ASSSEMBLY PS-22 PNFS0372 – ROD HANGERS PS-23 PNFS0373 – ADJUSTABLE BASE SUPPORT PS-24 (FOR PIPE NPS 3 TO NPS 16) PNFS0374 – STANDARD U-BOLT PS-25 (FOR PIPE NPS 3 TO NPS 24) PNFS0375 – T-SUPPORT PS-26 (FROM GRADE) PNFS0376 – CONTAMINATION PLATE PS-27 PNFS0377 – HANGING T-SUPPORT PS-28 (FOR PIPE NPS 6 AND SMALLER) PNFS0378 – HANGING TRAPEZE FROM CHANNEL PS-29 (FOR PIPE NPS 12 AND SMALLER) PNFS0379 – CANTILEVER BRACKET FROM EXISTING STEEL PS-30 PNFS0380 – SINGLE CANTILEVER FROM EXISTING STEEL PS-31 PNFS0400 – PIPE SHOE S-2 (FOR PIPE NPS 3 NPS 8) PNFS0401 – PIPE SHOE S-3 (FOR PIPE NPS 3 TO NPS 8) PNFS0402 – PIPE SHOE S-4 (FOR PIPE NPS 10 TO NPS 12) PNFS0403 – PIPE SHOE S-5 (FOR PIPE NPS 14 TO NPS 24 WITH LESS THAN 4” INSULATION) PNFS0404 – PIPE SHOE S-6 (FOR PIPE NPS 14 TO NPS 24 WITH 4” TO LESS THAN 6” INSULATION) PNFS0405 – PIPE SHOE S-7 (CLAMP TYPE) (FOR PIPE NPS 3 TO NPS 8) PNFS0406 – PIPE SHOE S-8 (CLAMP TYPE) (FOR PIPE NPS 10 AND NPS 12) PNFS0407 – PIPE SHOE S-9 (CLAMP TYPE) (FOR PIPE NPS 14 AND NPS 24) PNFS0450 – SPRING HANGER ASSEMBLY TYPE C SH-1 (FOR BARE PIPE) PNFS0451 – SPRING HANGER ASSEMBLY TYPE C SH-2 (FOR INSULATED PIPE) PNFS0452 – SPRING HANGER ASSEMBLY TYPE C SH-3 (FOR ALLOY CLAMP) PNFS0453 – SPRING HANGER ASSEMBLY TYPE C SH-4 (WITH WELDING LUG TYPE) PNFS0454 – SPRING HANGER ASSEMBLY TYPE F SH-5 (BASE TYPE AT GRADE) PNFS0455 – SPRING HANGER ASSEMBLY TYPE F SH-6 (BASE TYPE AT GRADE WITH SLIDE PLATE) PNFS0456 – SPRING HANGER ASSEMBLY TYPE F SH-7 (BASE TYPE FROM STEEL) PNFS0457 – SPRING HANGER ASSEMBLY TYPE F SH-8 (BASE TYPE FROM STEEL WITH SLIDE PLATE) PNFS0458 – CONSTANT SPRING HANGER ASSEMBLY TYPE C SH-9 (FOR BARE LINE) PNFS0459 – CONSTANT SPRING HANGER ASSEMBLY TYPE C SH-10 (CONSTANT FOR INSULATED LINE) PNFS0460 – CONSTANT SPRING HANGER ASSEMBLY TYPE C SH-11 (CONSTANT FOR ALLOY CLAMP) PNFS0461 – CONSTANT SPRING HANGER ASSEMBLY TYPE C SH-12 (WITH WELDING TYPE LUGS) PNFS0462 – CONSTANT SPRING HANGER ASSEMBLY TYPE F SH-13 (BASE TYPE FROM STEEL) PNFS0463 – CONSTANT SPRING SUPPORT TYPE F SH-14 (BASE TYPE FROM STEEL WITH SLIDE PLATE) PNFS0464 – SPRING HANGER ASSEMBLY TYPE A SH-15 (WITH WELDING LUGS FROM STEEL) PNFS0465 – SPRING SUPPORT ASSEMBLY TYPE D SH-16 (WITH WELDING LUGS FROM STEEL) PNFS0500 – TRUNNION SUPPORT DETAILS (14 Pages) PNFS0550 – WELDING LUG ATF-11 (FOR PIPING NPS 3 AND LARGER) PNFS0551 – WELDING CLIP ATF-12 (FOR PIPING NPS 3 AND LARGER) PNFS0552 – WELDING CLIP ATF-13 (FOR PIPING NPS 3 AND LARGER) PNFS0560 – WELDING LUG WL-1 PNFS0561 – WELDING LUG WL-2 (ON ELBOW)
Page 2 of 5
Process Industry Practices
PIP PNFS0001 Process Industry Practices
June 2005
SMALL BORE PIPE SUPPORTS DETAILS PNFS0600 – CANTILEVER BRACKET FROM ADJACENT STEEL OR VESSEL FPS-1 (FOR PIPING UP TO NPS 2-1/2) (2 Pages) PNFS0601 – BRACED CANTILEVER BRACKET FROM ADJACENT STEEL OR VESSEL FPS-2 (FOR PIPING UP TO NPS 2-1/2) (2 Pages) PNFS0602 – DOUBLE COLUMN BRACKET FROM ADJACENT STEEL FPS-3 (FOR PIPING UP TO NPS 2-1/2) PNFS0603 – DOUBLE COLUMN HANGER FROM ADJACENT STEEL FPS-4 (FOR PIPING UP TO NPS 2-1/2) PNFS0604 – SINGLE COLUMN BRACKET FROM ADJACENT STEEL FPS-5 (FOR PIPING UP TO NPS 2-1/2) PNFS0605 – SINGLE COLUMN HANGER FROM ADJACENT STEEL FPS-6 (FOR PIPING UP TO NPS 2-1/2) PNFS0606 – T-SUPPORT FROM ADJACENT STEEL FPS-7A (FOR PIPING UP TO NPS 2-1/2) PNFS0607 – T-SUPPORT FROM ADJACENT STEEL FPS-7B (FOR PIPING UP TO NPS 2-1/2) PNFS0608 – CANTILEVER BRACKET FOR HORIZONTAL PIPING FROM ADJACENT STEEL FPS-9 (FOR PIPING UP TO NPS 2-1/2) PNFS0609 – SINGLE “L” SUPPORT OR HANGER ADJACENT TO STEEL OR VESSEL FPS-10 (FOR PIPING UP TO NPS 2-1/2) PNFS0611 – SUPPORT FOR VERTICAL PIPING FPS-12 (FOR PIPING UP TO NPS 2-1/2) PNFS0612 – CANTILEVER SUPPORT ADJACENT TO STEEL FPS-13 (FOR PIPING UP TO NPS 2-1/2) PNFS0614 – CANTILEVER BRACKET FOR PIPE SUPPORTS FPS-16 (FOR PIPING UP TO NPS 2-1/2) PNFS0614 – CANTILEVER BRACKET FOR PIPE SUPPORTS FPS-15 (FOR PIPING UP TO NPS 2-1/2) PNFS0615 – CANTILEVER BRACKET FOR PIPE SUPPORTS FPS-16 (FOR PIPING UP TO NPS 2-1/2) PNFS0615 – CANTILEVER BRACKET FOR PIPE SUPPORTS FPS-16 (FOR PIPING UP TO NPS 2-1/2) PNFS0619 – SUPPLEMENTARY STEEL DETAIL FPS-20 (FOR PIPING UP TO NPS 2-1/2) PNFS0620 – SUPPLEMENTARY STEEL DETAIL FPS-21 (FOR PIPING UP TO NPS 2-1/2) PNFS0625 – CINCH PLATE FPS-26 (FOR PIPING UP TO NPS 2-1/2) PNFS0627 – ‘T’ POST FPS-28 (FOR PIPING UP TO NPS 2-1/2) PNFS0628 – ‘T’ POST FPS-29 (FOR PIPING UP TO NPS 2-1/2) PNFS0629 – SUPPORT FROM GRADE OR STEEL FPS-30 (FOR PIPING UP TO NPS 2-1/2) (2 Pages) PNFS0639 – ADJUSTABLE SUPPORT FROM GRADE OR STEEL FPS-40 (FOR PIPING UP TO NPS 2-1/2) PNFS0640 – ADJUSTABLE SUPPORT FROM GRADE OR STEEL FPS-41 (FOR PIPING UP TO NPS 2-1/2) PNFS0641 – SUPPORT FOR DRAIN FPS-42 (FOR PIPING UP TO NPS 2-1/2) PNFS0649 – CANTILEVER BRACKET FROM ADJACENT PIPING FPS-50 (FOR PIPING UP TO NPS 2-1/2) PNFS0650 – CANTILEVER BRACKET FROM ADJACENT PIPING FPS-51 (FOR PIPING UP TO NPS 2-1/2) PNFS0651 – CANTILEVER BRACKET FROM ADJACENT PIPING FPS-52 (FOR PIPING UP TO NPS 2-1/2) PNFS0663 – BRACED CANTILEVER BRACKET FROM ADJACENT VESSEL FPS-64 (FOR PIPING UP TO NPS 2-1/2) PNFS0664 – BRACKET FOR VERTICAL PIPING FROM ADJACENT VESSEL FPS-65 (FOR PIPING UP TO NPS 2-1/2) (2 Pages) PNFS0679 – BRACED CANTILEVER BRACKET FOR HORIZONTAL PIPING FROM ADJACENT VESSEL FPS-80 (FOR PIPING UP TO NPS 2-1/2) PNFS0700 – SHORT LENGTH ROD HANGER FROM ADJACENT STEEL FPH-1 (FOR PIPING UP TO NPS 2-1/2) (2 Pages) PNFS0701 – LONG LENGTH ROD HANGER FPH-2 (FOR PIPING UP TO NPS 2-1/2) (2 Pages) PNFS0702 – TRAPEZE TYPE ROD HANGER FPH-3 (FOR PIPING UP TO NPS 2-1/2) PNFS0771 – ANCHOR FROM GRADE OR STEEL FPA-22 (FOR PIPING UP TO NPS 2-1/2) PNFS0800 – GUIDE FOR INSULATED HORIZONTAL PIPING FROM ADJACENT STEEL FPG-1 (FOR PIPING UP TO NPS 2-1/2) PNFS0802 – GUIDE FROM STEEL FPG-3 (FOR PIPING UP TO NPS 2-1/2) PNFS0805 – STOP FOR HORIZONTAL PIPING FROM ADJACENT STEEL FPG-6 (FOR PIPING UP TO NPS 2-1/2) PNFS0807 – STOP FOR HORIZONTAL PIPING FROM ADJACENT STEEL FPG-8 (FOR PIPING UP TO NPS 2-1/2) PNFS0809 – GUIDE FOR UNINSULATED VERTICAL PIPING FROM ADJACENT TOWER OR STEEL FPG-10 (FOR PIPING UP TO NPS 2-1/2) PNFS0810 – GUIDE FOR UNINSULATED VERTICAL PIPING FROM ADJACENT STEEL FPG-11 (FOR PIPING UP TO NPS 2-1/2) (2 Pages) PNFS0816 – GUIDE FOR VERTICAL PIPING FROM VESSELFPG-17 (FOR PIPING UP TO NPS 2-1/2) (3 Pages) PNFS0820 – GUIDE ADJACENT TO GRADE OR STEEL FPG-21A & 21B (FOR PIPING UP TO NPS 2-1/2) PNFS0821 – 4-WAY STOP ADJACENT TO GRADE OR STEEL FPG-21C (FOR PIPING UP TO NPS 2-1/2)
Process Industry Practices
Page 3 of 5
June 2005
PIP PNFS0001 Process Industry Practices
SMALL BORE PIPE SUPPORTS DETAILS (continued) PNFS0828 – HOLD DOWN SUPPORT AND HORIZONTAL GUIDE FPG-29 (FOR PIPING UP TO NPS 2-1/2) (3 Pages) PNFS0850 – WELDING LUG ATF-1 (FOR PIPING UP TO NPS 2-1/2) PNFS0851 – WELDING CLIP DETAIL ATF-2 (FOR PIPING UP TO NPS 2-1/2) PNFS0852 – WELDING CLIP DETAIL ATF-3 (FOR PIPING UP TO NPS 2-1/2) PNFS0853 – HANGER ATTACHMENT ATF-4 (FOR PIPING UP TO NPS 2-1/2) PNFS0856 – HANGER ATTACHMENT ATF-7 (FOR PIPING UP TO NPS 2-1/2) (3 Pages) PNFS0857 – SPECIAL STEEL WASHER PLATE ATF-8 (FOR PIPING UP TO NPS 2-1/2) PNFS0859 – HANGER ATTACHMENT ATF-10 (FOR PIPING UP TO NPS 2-1/2) PNFS0861 – HANGER ATTACHMENT ATF-11 (FOR PIPING UP TO NPS 2-1/2) PNFS0863 – BRACE FOR RELIEF VALVE ATF-14 (FOR PIPING UP TO NPS 2-1/2) PNFS0866 – BRACKET DETAIL ATF-17 (FOR PIPING UP TO NPS 2-1/2) PNFS0900 – FORGED STEEL CLEVIS CLF (FOR PIPING UP TO NPS 2-1/2) PNFS0901 – STANDARD U-BOLT UBF (FOR PIPING UP TO NPS 2-1/2) PNFS0902 – STRAIGHT OR EYE ROD RF/HF (FOR PIPING UP TO NPS 2-1/2) PNFS0910 – PIPE SUPPORT DETAILS FF-1A THROUGH FS-1D (FOR PIPING UP TO NPS 2-1/2) PNFS0911 – CLAMPED PIPE SHOE DETAILS FS-1J THROUGH FS-1N (FOR PIPING UP TO NPS 2-1/2)
Page 4 of 5
Process Industry Practices
PIP PNFS0001 Process Industry Practices
1.
May 2005
Introduction 1.1
Purpose This Practice provides fabrication/installation details for pipe supports.
1.2
Scope This Practice describes the minimum requirements to fabricate or install supports for large and small bore piping. The details provide dimensional and engineering requirements for the design and engineering of pipe supports.
2.
References Applicable parts of the following industry codes and standards, and references shall be considered an integral part of this Practice. The edition in effect on the date of contract award shall be used, except as otherwise noted. Short titles are used herein where appropriate. 2.1
Industry Codes and Standards • Manufacturers Standard Specifications –
2.2
MSS SP-58 – Pipe Hangers and Supports – Materials, Design and Manufacturing
Other References • Grinnel Pipe Hangers
Process Industry Practices
Page 5 of 5
This page intentionally left blank.
PIP PNFS0001
Process Industry Practices
June 2005
LARGE BORE PIPE SUPPORTS DRAWING NUMBER
DETAIL NUMBER
PNFS0100
DS-1
DIRECTIONAL STOP DS-1 (FOR INSULATED PIPE NPS 3 TO NPS 24)
PNFS0101
DS-2
DIRECTIONAL STOP DS-2 (FOR UNINSULATED PIPE NPS 3 TO NPS 24)
PNFS0200
PG-1
PIPE GUIDE PG-1 (FOR INSULATED PIPE NPS 3 TO NPS 8)
PNFS0201
PG-2
PIPE GUIDE PG-2 (FOR INSULATED PIPE NPS 3 TO NPS 8)
PNFS0205
PG-3
PIPE GUIDE PG-3 (FOR INSULATED PIPE NPS 10 TO NPS 24)
PNFS0206
PG-3-H
PIPE GUIDE PG-3-H (FOR INSULATED PIPE NPS 10 TO NPS 24)
PNFS0209
PG-4
PIPE GUIDE PG-4 (FOR UNINSULATED PIPE NPS 3 TO NPS 12)
DESCRIPTION
PNFS0210
PG-5
PIPE GUIDE PG-5 (FOR BARE PIPE NPS 14 AND NPS 24)
PNFS0212
PG-6
PIPE GUIDE PG-6 (FOR UNINSULATED VERTICAL PIPING NPS 3 TO NPS 8)
PNFS0213
PG-7
PIPE GUIDE PG-7 (FOR UNINSULATED VERTICAL PIPING NPS 10 TO NPS 24)
PNFS0214
PG-8
PIPE GUIDE PG-8 (FOR INSULATED PIPE NPS 3 TO NPS 6)
PNFS0215
PG-9
PIPE GUIDE PG-9 (FOR INSULATED PIPING PIPE NPS 8 TO NPS 24)
PNFS0250
PGC-1
PIPE GUIDE CLIPS PGC-1 (ATTACHMENTS FOR GUIDES NPS 8 TO NPS 14)
PNFS0251
PGC-2
PIPE GUIDE CLIPS PGC-2 (ATTACHMENTS FOR GUIDES NPS 16 TO NPS 14)
PNFS0252
PSVC-1
VESSEL CLIPS PSVC-1
PNFS0253
PSVC-2
PNFS0350
PS-1
VESSEL CLIPS PSVC-2 CANTILEVER SUPPORT OFF VESSEL PS-1
PNFS0351
PS-2
KNEE BRACE SUPPORT OFF VESSEL PS-2
PNFS0352
PS-3
KNEE BRACE SUPPORT OFF VESSEL OS03
PNFS0353
PS-4
SINGLE KNEE BRACE SUPPORT OFF VESSEL PS-4
PNFS0354
PS-5
KNEE BRACE SUPPORT OFF VESSEL PS-5
PNFS0355
PS-6
CANTILEVER SUPPORT OFF VESSEL PS-6 (ROUND TYPE CLIPS)
PNFS0356
PS-7
KNEE BRACE SUPPORT OFF VESSEL PS-7
PNFS0357
PS-8
SINGLE KNEE BRACE SUPPORT OFF VESSEL PS-8 (ROUND TYPE CLIPS)
PNFS0365
PS-16
CANTILEVER BRACKETS PS-16 (FROM ADJACENT STEEL OR VESSEL)
PNFS0366
PS-17
KNEE BRACED BRACKETS PS-17 (FROM ADJACENT STEEL)
PNFS0367
PS-18
KNEE BRACED BRACKETS PS-18 (FROM ADJACENT STEEL)
PNFS0368
PS-19
T-SUPPORT PS-19 (FROM ADJACENT STEEL)
PNFS0369
PS-20
SINGLE COLUMN BRACKET PS-20 (FROM EXISTING STEEL)
PNFS0370
PS-21
DOUBLE COLUMN BRACKET PS-21 (FROM EXISTING STEEL)
PNFS0371
PS-22
SLIDE PLATE ASSSEMBLY PS-22
PNFS0372
PS-23
ROD HANGERS PS-23
PNFS0373
PS-24
ADJUSTABLE BASE SUPPORT PS-24 (FOR PIPE NPS 3 TO NPS 16)
PNFS0374
PS-25
STANDARD U-BOLT PS-25 (FOR PIPE NPS 3 TO NPS 24)
PNFS0375
PS-26
T-SUPPORT (FROM GRADE) PS-26
PNFS0376
PS-27
CONTAMINATION PLATE PS-27
PNFS0377
PS-28
HANGING T-SUPPORT PS-28 (FOR PIPE NPS 6 AND SMALLER)
PNFS0378
PS-29
HANGING TRAPEZE FROM CHANNEL PS-29 (FOR PIPE NPS 12 AND SMALLER)
PNFS0379
PS-30
CANTILEVER BRACKET FROM EXISTING STEEL PS-30
PNFS0380
PS-31
SINGLE CANTILEVER FROM EXISTING STEEL PS-31
PNFS0400
S-2
PIPE SHOE S-2 (FOR PIPE NPS 3 NPS 8)
PNFS0401
S-3
PIPE SHOE S-2 (FOR PIPE NPS 3 TO NPS 8)
PIP PNFS0001
June 2005
Process Industry Practices
LARGE BORE PIPE SUPPORTS (Continued) DRAWING NUMBER
DETAIL NUMBER
PNFS0402
S-4
PIPE SHOE S-4 (FOR PIPE NPS 10 TO NPS 12)
PNFS0403
S-5
PIPE SHOE S-5 (FOR PIPE NPS 14 TO NPS 24 WITH LESS THAN 4” INSULATION)
PNFS0404
S-6
PIPE SHOE S-6 (FOR PIPE NPS 14 TO NPS 24 WITH 4” TO LESS THAN 6” INSULATION)
PNFS0405
S-7
PIPE SHOE S-7 (CLAMP TYPE) (FOR PIPE NPS 3 TO NPS 8)
PNFS0406
S-8
PIPE SHOE S-8 (CLAMP TYPE) (FOR PIPE NPS 10 AND NPS 12)
PNFS0407
S-9
PIPE SHOE S-9 (CLAMP TYPE) (FOR PIPE NPS 14 AND NPS 24)
PNFS0450
SH-1
SPRING HANGER ASSEMBLY TYPE C SH-1 (FOR BARE PIPE)
PNFS0451
SH-2
SPRING HANGER ASSEMBLY TYPE C SH-2 (FOR INSULATED PIPE)
DESCRIPTION
PNFS0452
SH-3
SPRING HANGER ASSEMBLY TYPE C SH-3 (FOR ALLOY CLAMP)
PNFS0453
SH-4
SPRING HANGER ASSEMBLY TYPE C SH-4 (WITH WELDING LUG TYPE)
PNFS0454
SH-5
SPRING HANGER ASSEMBLY TYPE F SH-5 (BASE TYPE AT GRADE)
PNFS0455
SH-6
SPRING HANGER ASSEMBLY TYPE F SH-6 (BASE TYPE AT GRADE WITH SLIDE PLATE)
PNFS0456
SH-7
SPRING HANGER ASSEMBLY TYPE F SH-7 (BASE TYPE FROM STEEL)
PNFS0457
SH-8
SPRING HANGER ASSEMBLY TYPE F SH-8 (BASE TYPE FROM STEEL WITH SLIDE PLATE)
PNFS0458
SH-9
CONSTANT SPRING HANGER ASSEMBLY TYPE C SH-9 (FOR BARE LINE)
PNFS0459
SH-10
CONSTANT SPRING HANGER ASSEMBLY TYPE C SH-10 (CONSTANT FOR INSULATED LINE)
PNFS0460
SH-11
CONSTANT SPRING HANGER ASSEMBLY TYPE C SH-11 (CONSTANT FOR ALLOY CLAMP)
PNFS0461
SH-12
CONSTANT SPRING HANGER ASSEMBLY TYPE C SH-12 (WITH WELDING TYPE LUGS)
PNFS0462
SH-13
CONSTANT SPRING HANGER ASSEMBLY TYPE F SH-13 (BASE TYPE FROM STEEL)
PNFS0463
SH-14
CONSTANT SPRING SUPPORT TYPE F SH-14 (BASE TYPE FROM STEEL WITH SLIDE PLATE)
PNFS0464
SH-15
SPRING HANGER ASSEMBLY TYPE A SH-15 (WITH WELDING LUGS FROM STEEL)
PNFS0465
SH-16
SPRING SUPPORT ASSEMBLY TYPE D SH-16 (WITH WELDING LUGS FROM STEEL)
PNFS0500
TR-A
TRUNNION SUPPORT TR-A (HORIZONTAL SUPPORT ON HORIZONTAL PIPE), Page 1
PNFS0500
TR-B
TRUNNION SUPPORT TR-B (VERTICAL SUPPORT ON HORIZONTAL PIPE), Page 2
PNFS0500
TR-C
TRUNNION SUPPORT TR-C (VERTICAL SUPPORT ON VERTICAL ELL), Page 3
PNFS0500
TR-D
TRUNNION SUPPORT TR-D (HORIZONTAL SUPPORT ON VERTICAL ELL), Page 4
PNFS0500
TR-E
TRUNNION SUPPORT TR-E (HORIZONTAL SUPPORT ON VERTICAL ELL), Page 5
PNFS0500
TR-F
TRUNNION SUPPORT TR-F (HORIZONTAL SUPPORT ON VERTICAL ELL), Page 6
PNFS0500
TR-G
TRUNNION SUPPORT TR-G (BOLTED SUPPORT ON VERTICAL PIPE), Page 7
PNFS0500
TR-H
TRUNNION SUPPORT TR-H (BOLTED SUPPORT ON VERTICAL ELL), Page 8
PNFS0500
TR-J
TRUNNION SUPPORT TR-J (ADJUSTABLE), Page 9
PNFS0500
TR-K
TRUNNION SUPPORT TR-K (HORIZONTAL SUPPORT ON HORIZONTAL ELL), Page 10
PNFS0500
TR-M
TRUNNION SUPPORT TR-M, Page 11
PNFS0500
TR-1
TYPICAL TRUNNION ATTACHMENT DETAIL TR-1, Page 12
PNFS0500
TR-2
TRUNNION ATTACHMENT BASE PLATES TR-2, Page 13
PNFS0500
TR-3
PNFS0550
ATF-11
WELDING LUG ATF-11 (FOR PIPING NPS 3 AND LARGER)
TYPICAL TRUNNION DESIGNATIONS ON ISOMETRIC PIPING DRAWINGS TR-3, Page 14
PNFS0551
ATF-12
WELDING CLIP ATF-12 (FOR PIPING NPS 3 AND LARGER)
PNFS0552
ATF-13
WELDING CLIP ATF-13 (FOR PIPING NPS 3 AND LARGER)
PNFS0560
WL-1
WELDING LUG WL-1
PNFS0561 (PNFS0560 page 2)
WL-2
WELDING LUG WL-2 (ON ELBOW)
PIP PNFS0001
Process Industry Practices
June 2005
SMALL BORE PIPE SUPPORTS DRAWING NUMBER
DETAIL NUMBER
PNFS0600
FPS-1
CANTILEVER BRACKET FROM ADJACENT STEEL OR VESSEL FPS-1 (FOR PIPING UP TO NPS 2-1/2), Page 1
PNFS0600
FPS-1
CANTILEVER BRACKET FROM ADJACENT STEEL OR VESSEL FPS-1 (FOR PIPING UP TO NPS 2-1/2), Page 2
PNFS0601
FPS-2
BRACED CANTILEVER BRACKET FROM ADJACENT STEEL OR VESSEL FPS-2 (FOR PIPING UP TO NPS 2-1/2), Page 1
PNFS0601
FPS-2
BRACED CANTILEVER BRACKET FROM ADJACENT STEEL OR VESSEL FPS-2 (FOR PIPING UP TO NPS 2-1/2), Page 2
DESCRIPTION
PNFS0602
FPS-3
DOUBLE COLUMN BRACKET FROM ADJACENT STEEL FPS-3 (FOR PIPING UP TO NPS 2-1/2)
PNFS0603
FPS-4
DOUBLE COLUMN HANGER FROM ADJACENT STEEL FPS-4 (FOR PIPING UP TO NPS 2-1/2)
PNFS0604
FPS-5
SINGLE COLUMN BRACKET FROM ADJACENT STEEL FPS-5 (FOR PIPING UP TO NPS 2-1/2)
PNFS0605
FPS-6
PNFS0606
FPS-7A
T-SUPPORT FROM ADJACENT STEEL FPS-7A (FOR PIPING UP TO NPS 2-1/2)
SINGLE COLUMN HANGER FROM ADJACENT STEEL FPS-6 (FOR PIPING UP TO NPS 2-1/2)
PNFS0607 (PNFS0606 page 2)
FPS-7B
T-SUPPORT FROM ADJACENT STEEL FPS-7B (FOR PIPING UP TO NPS 2-1/2)
PNFS0608
FPS-9
CANTILEVER BRACKET FOR HORIZONTAL PIPING FROM ADJACENT STEEL FPS-9 (FOR PIPING UP TO NPS 2-1/2)
PNFS0609
FPS-10
SINGLE “L” SUPPORT OR HANGER ADJACENT TO STEEL OR VESSEL FPS-10 (FOR PIPING UP TO NPS 2-1/2)
PNFS0611
FPS-12
SUPPORT FOR VERTICAL PIPING FPS-12 (FOR PIPING UP TO NPS 2-1/2)
PNFS0612
FPS-13
CANTILEVER SUPPORT ADJACENT TO STEEL FPS-13 (FOR PIPING UP TO NPS 2-1/2)
PNFS0614
FPS-15
CANTILEVER BRACKET FOR PIPE SUPPORTS FPS-15 (FOR PIPING UP TO NPS 2-1/2), Page 1
PNFS0614
FPS-15
CANTILEVER BRACKET FOR PIPE SUPPORTS FPS-15 (FOR PIPING UP TO NPS 2-1/2), Page 2
PNFS0615
FPS-16
CANTILEVER BRACKET FOR PIPE SUPPORTS FPS-16 (FOR PIPING UP TO NPS 2-1/2), Page 1
PNFS0615
FPS-16
CANTILEVER BRACKET FOR PIPE SUPPORTS FPS-16 (FOR PIPING UP TO NPS 2-1/2), Page 2
PNFS0619
FPS-20
SUPPLEMENTARY STEEL DETAIL FPS-20 (FOR PIPING UP TO NPS 2-1/2)
PNFS0620
FPS-21
SUPPLEMENTARY STEEL DETAIL FPS-21 (FOR PIPING UP TO NPS 2-1/2)
PNFS0625
FPS-26
CINCH PLATE FPS-26 (FOR PIPING UP TO NPS 2-1/2)
PNFS0627
FPS-28
‘T’ POST FPS-28 (FOR PIPING UP TO NPS 2-1/2)
PNFS0628
FPS-29
‘T’ POST FPS-29 (FOR PIPING UP TO NPS 2-1/2)
PNFS0629
FPS-30
SUPPORT FROM GRADE OR STEEL FPS-30 (FOR PIPING UP TO NPS 2-1/2), Page 1
PNFS0629
FPS-30
SUPPORT FROM GRADE OR STEEL FPS-30 (FOR PIPING UP TO NPS 2-1/2), Page 2
PNFS0639
FPS-40
ADJUSTABLE SUPPORT FROM GRADE OR STEEL FPS-40 (FOR PIPING UP TO NPS 2-1/2)
PNFS0640
FPS-41
ADJUSTABLE SUPPORT FROM GRADE OR STEEL FPS-41 (FOR PIPING UP TO NPS 2-1/2)
PNFS0641
FPS-42
SUPPORT FOR DRAIN FPS-42 (FOR PIPING UP TO NPS 2-1/2)
PNFS0649
FPS-50
CANTILEVER BRACKET FROM ADJACENT PIPING FPS-50 (FOR PIPING UP TO NPS 2-1/2)
PNFS0650
FPS-51
CANTILEVER BRACKET FROM ADJACENT PIPING FPS-51 (FOR PIPING UP TO NPS 2-1/2)
PNFS0651
FPS-52
CANTILEVER BRACKET FROM ADJACENT PIPING FPS-52 (FOR PIPING UP TO NPS 2-1/2)
PNFS0663
FPS-64
BRACED CANTILEVER BRACKET FROM ADJACENT VESSEL FPS-64 (FOR PIPING UP TO NPS 2-1/2)
PNFS0664
FPS-65
BRACKET FOR VERTICAL PIPING FROM ADJACENT VESSEL FPS-65 (FOR PIPING UP TO NPS 2-1/2), Page 1
PNFS0664
FPS-65
BRACKET FOR VERTICAL PIPING FROM ADJACENT VESSEL FPS-65 (FOR PIPING UP TO NPS 2-1/2), Page 2
PNFS0679
FPS-80
BRACED CANTILEVER BRACKET FOR HORIZONTAL PIPING FROM ADJACENT VESSEL FPS-80 (FOR PIPING UP TO NPS 2-1/2)
PNFS0700
FPH-1
SHORT LENGTH ROD HANGER FROM ADJACENT STEEL FPH-1 (FOR PIPING UP TO NPS 2-1/2), Page 1
PNFS0700
FPH-1
SHORT LENGTH ROD HANGER FPH-1 (FOR PIPING UP TO NPS 2-1/2), Page 2
PIP PNFS0001
June 2005
Process Industry Practices
SMALL BORE PIPE SUPPORTS (Continued) DRAWING NUMBER
DETAIL NUMBER
PNFS0701
FPH-2
LONG LENGTH ROD HANGER FPH-2 (FOR PIPING UP TO NPS 2-1/2), Page 1
PNFS0701
FPH-2
LONG LENGTH ROD HANGER FPH-2 (FOR PIPING UP TO NPS 2-1/2), Page 2
PNFS0702
FPH-3
TRAPEZE TYPE ROD HANGER FPH-3 (FOR PIPING UP TO NPS 2-1/2)
PNFS0771
FPA-22
ANCHOR FROM GRADE OR STEEL FPA-22 (FOR PIPING UP TO NPS 2-1/2)
PNFS0800
FPG-1
GUIDE FOR INSULATED HORIZONTAL PIPING FROM ADJACENT STEEL FPG-1 (FOR PIPING UP TO NPS 2-1/2)
DESCRIPTION
PNFS0802
FPG-3
GUIDE FROM STEEL FPG-3 (FOR PIPING UP TO NPS 2-1/2)
PNFS0805
FPG-6
STOP FOR HORIZONTAL PIPING FROM ADJACENT STEEL FPG-6 (FOR PIPING UP TO NPS 2-1/2)
PNFS0807
FPG-8
STOP FOR HORIZONTAL PIPING FROM ADJACENT STEEL FPG-8 (FOR PIPING UP TO NPS 2-1/2)
PNFS0809
FPG-10
GUIDE FOR UNINSULATED VERTICAL PIPING FROM ADJACENT TOWER OR STEEL FPG-10 (FOR PIPING UP TO NPS 2-1/2)
PNFS0810
FPG-11
GUIDE FOR UNINSULATED VERTICAL PIPING FROM ADJACENT STEEL FPG-11 (FOR PIPING UP TO NPS 2-1/2), Page 1
PNFS0810
FPG-11
GUIDE FOR UNINSULATED VERTICAL PIPING FROM ADJACENT STEEL FPG-11 (FOR PIPING UP TO NPS 2-1/2), Page 2
PNFS0816
FPG-17
GUIDE FOR VERTICAL PIPING FROM VESSEL FPG-17 (FOR PIPING UP TO NPS 2-1/2), Page 1
PNFS0816
FPG-17
GUIDE FOR HORIZONTAL PIPING FROM VESSEL FPG-17 (FOR PIPING UP TO NPS 2-1/2), Page 2
PNFS0816
FPG-17
GUIDE FOR HORIZONTAL PIPING FROM ADJACENT STEEL FPG-17 (FOR PIPING UP TO NPS 2-1/2), Page 3
PNFS0820 (page 1)
FPG-21A & FPG-21B
PNFS0821 (PNFS0820 page 2)
FPG-21C
PNFS0828
FPG-29
HOLD DOWN SUPPORT AND HORIZONTAL GUIDE FPG-29 (FOR PIPING UP TO NPS 2-1/2), Page 1
PNFS0828
FPG-29
HOLD DOWN PIPE SUPPORT FPG-29 (FOR PIPING UP TO NPS 2-1/2), Page 2
PNFS0828
FPG-29
PNFS0850
ATF-1
WELDING LUG ATF-1 (FOR PIPING UP TO NPS 2-1/2)
PNFS0851
ATF-2
WELDING CLIP DETAIL ATF-2 (FOR PIPING UP TO NPS 2-1/2)
GUIDE ADJACENT TO GRADE OR STEEL FPG-21A & FPG-21B (FOR PIPING UP TO NPS 2-1/2) 4-WAY STOP ADJACENT TO GRADE OR STEEL FPG-21C (FOR PIPING UP TO NPS 2-1/2)
HOLD DOWN PIPE SUPPORT FPG-29 (FOR PIPING UP TO NPS 2-1/2), Page 3
PNFS0852
ATF-3
WELDING CLIP DETAIL ATF-3 (FOR PIPING UP TO NPS 2-1/2)
PNFS0853
ATF-4
HANGER ATTACHMENT ATF-4 (FOR PIPING UP TO NPS 2-1/2)
PNFS0856
ATF-7
HANGER ATTACHMENT ATF-7 (FOR PIPING UP TO NPS 2-1/2), Page 1
PNFS0856
ATF-7
HANGER ATTACHMENT ATF-7 (FOR PIPING UP TO NPS 2-1/2), Page 2
PNFS0856
ATF-7
HANGER ATTACHMENT ATF-7 (FOR PIPING UP TO NPS 2-1/2), Page 3
PNFS0857
ATF-8
SPECIAL STEEL WASHER PLATE ATF-8 (FOR PIPING UP TO NPS 2-1/2)
PNFS0859
ATF-10
HANGER ATTACHMENT ATF-10 (FOR PIPING UP TO NPS 2-1/2)
PNFS0861
ATF-11
HANGER ATTACHMENT ATF-11 (FOR PIPING UP TO NPS 2-1/2)
PNFS0863
ATF-14
BRACE FOR RELIEF VALVE ATF-14 (FOR PIPING UP TO NPS 2-1/2)
PNFS0866
ATF-17
BRACKET DETAIL ATF-17 (FOR PIPING UP TO NPS 2-1/2)
PNFS0900
CLF
FORGED STEEL CLEVIS CLF (FOR PIPING UP TO NPS 2-1/2)
PNFS0901
UBF
STANDARD U-BOLT UBF (FOR PIPING UP TO NPS 2-1/2)
PNFS0902
RF/HF
PNFS0910 (PNFS0550 page 1)
FS-1A through FS-1D
SHOE DETAILS FS-1A THROUGH FS-1D (FOR PIPING UP TO NPS 2-1/2)
PNFS0911 (PNFS0550 page 2)
FS-1J through FS-1N
CLAMPED SHOE DETAILS FS-1J THROUGH FS-1N (FOR PIPING UP TO NPS 2-1/2)
STRAIGHT OR EYE ROD RF/HF (FOR PIPING UP TO NPS 2-1/2)
PNFS010
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS
OCT 2004 PAGE 1 OF 1
DIRECTIONAL STOP DS-1 {FOR INSULATED PIPE NPS 3 TO 24)
SEE PNFS0400 THRU PNFS0404 3 SIDES (TYP.)
J __
---'----~ --~---I
I
t--
----r----
T---
1
1
--------~--
--+=~~~,..~=-~
3 SIDES (TYP.) 1/16" CUEAR
1/16" CUEAR
NO WELD
(TYP.)
-H---'-
(TYP.)
THIS SIDE (TYP.)
ELEVATION- TYPE 2 & 3
ELEVATION- TYPE 1
TYPE
PIPE SIZE (NPS)
t.41
HORIZ. FORCE (USER DEFINED)
1
3 TO 8
L3X3X3/BXO' -6"LG.
USER DEFINED
2
10 & 12
WT4X9
USER DEFINED
3
14 TO 24
WT6X13
USER DEFINED
IPIPE SUPPORT MARK NO.I
~ DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
\__TYPE
PNFS0101
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS DIRECTIONAL STOP DS-2 (FOR UNINSULATED PIPE NPS 3 TO 24)
OCT 2004 PAGE 1 OF 1
II
I I
II
I
___ T__ _
___ l __ _
I
------+-------
I
Ill
II I
4" (TYPE 1 6" (TYPE 2 (TYP.)
1/16" CLEAR (TYP.)
ELEVATION- TYPE 1
(4" WIDE)
ELEVATION-TYPE 2
(6" WIDE) PI~~ ~~ZE NPS
TYPE
ELEVATION- TYPE 3 & 4
~~ORIZ. FORC~\
M1
USER DEFINED
1
3 TO 4
1/2 lHICK
II!.
USER DEFINED
2
6 TO 8
1/2 lHICK
II!.
USER DEFINED
3
10
4
14 TO 24
& 12
WT4X9
USER DEFINED
WT6X13
USER DEFINED
I PIPE suPPORT MARK No.I
~ DIMENSIONS ARE GIVEN IN FlEET AND/OR INCHES.
\__TYPE
PROCESS INDUSTRY PRACTICES 1-----F_A_B_R_Ic_A_T_Io_N...:./_I_Ns_T_A_L_LA_T_I_o_N_DE_T_A_IL_s_ _--1
PNFS020
PIPE GUIDE PG-1 (FOR INSULATED PIPE NPS 3 TO 8)
ocT 2004 PAGE
1 OF 1
,---r===~
:F:=,=·=r-===i: 1 11 1 Ill --------------+---4 r-----t.--------------~ II 1!1 II 'I 'I' I'
-f=
I
-t+---~1 : ---Ftc:=-==:J
-f
•I
I
II'I
I
IiI
I•
IIII
----------------rr-----< ' >-----r,-------------I
I
!b::_j:~::d! k---' J ----=t---PLAN
3"
1/2"
PLATE 3 1/2x1/2
•
"'
--.1'--.1'-----'1/16" CLEAR (TYP.)
ELEVATION
I PIPE suPPORT MARK No.I
I PG-1 I DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
PROCESS INDUSTRY PRACTICES 1-----F_A_B_R_Ic_A_T_Io_N...:./_I_Ns_T_A_L_LA_T_I_o_N_DE_T_A_IL_s_ _--1 PIPE GUIDE PG-2 (FOR INSULATED PIPE NPS 3 TO 8)
PNFS0201 ocT 2004 PAGE
1 OF 1
II II -:::= r~= II II I
L3X3X3/B
EXISTING BEA:
-7-
------------------1
f
-.l'--.l'--1 16-.-C-LE;R (TYP-.)--- - - - -
ELEVATION I PIPE suPPORT MARK No.I DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
I PG-21
PROCESS INDUSTRY PRACTICES 1-----F_A_B_R_Ic_A_T_Io_N...:./_I_Ns_T_A_L_LA_T_I_o_N_DE_T_A_IL_s_ _--1
PNFS020 ocT 2004 PAGE 1 OF 1
PIPE GUIDE PG-3 {FOR INSULATED PIPE NPS 10 TO 24)
•
"'
PLAN
~1 t.tt =~~=:;n IIi h 1
,z.l"
II
EXISTING PIPE SHOE
I - - - - - - - - -f- - - -I- - - - - - - - - - - - - I
I
I - - - - - - - - -f- - - - - - - - - - - - - - - - - I I - - - - - - - - -r-- - - - - - - - - - - - - - - - - I _/
1/8"
CLEAR {TYP.)
EXISTING BEAM
ELEVATION PIPE SUPPORT MARK NO.
IPG-31 DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
PROCESS INDUSTRY PRACTICES 1-----F_A_B_R_Ic_A_T_Io_N...:./_I_Ns_T_A_L_LA_T_I_o_N_DE_T_A_IL_s_ _--1 PIPE GUIDE/HOLD DOWN PG-3-H {FOR INSULATED PIPE NPS 10 TO 24)
PNFS020 ocT 2004 PAGE
1
OF
1
•
"'
PLAN
f----------+1-------------l
EXISTING BEAM
ELEVATION I PIPE suPPORT MARK No.I
I PG-3-H I DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
PROCESS INDUSTRY PRACTICES 1-----F_A_B_R_Ic_A_T_Io_N...:./_I_Ns_T_A_L_LA_T_I_o_N_DE_T_A_IL_s_ _--1 PIPE GUIDE PG-4 {FOR UNINSULATED PIPE NPS 3 THRU 12)
f
L3X3X3/B
-'~,
....I!' I c::i
c::i
d
d
""
;;:
""
D..
D..
;;: PIPE WALL SHALL NOT BE BURNED THROUGH
PIPE WALL SHALL NOT BE BURNED THROUGH
OR CUT.
OR CUT.
ATTACHMENT WITHOUT
ATTACHMENT WITH
REINFORCING PAD
REINFORCING PAD
1I
. STIFF. ~---tt--(NOTE
(MIN.)
II
BAR 1) I
~-:f
SUPT.
NOTE: 1. STIFFENING BARS 1 1/2"X1 /2" SHALL BE ALUMINUM FOR ALUMINUM TRUNNIONS, AND CARBON STEEL FOR CARBON STEEL TRUNNIONS AND ALL OTHER MATERIALS. SUFFICIENT SHIMS OR WEDGES ARE TO BE PROVIDED BY THE FIELD TO UNIFORMLY DISTRIBUTE THE TRUNNION LOAD ON THE SUPPORT UNLESS OTHER~SE NOTED. 2. TRUNNION CALL OUT AS PER PAGE 14 OF 14
DIMENSIONS ARE GIVIEN IN FEET AND/OR INCHES.
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS
TRUNNION ATTACHMENT, BASE PLATE DETAILS, TR-2
lRUNNION SIZE
BASE PL SIZE
1 1/2" ,2",3" ---
8 X 8 X 3/8
4 .. ----------
8 X 8 X 1/2
6"----------
10 X 10 X 3/4
a" ----------
12 X 12 X 3/4
1o· ----------
12 X 12 X 1
12"- - - - - - - - - -
14 X 14 X 1
14"----------
15 X 15 X 1
16"----------
17 X 17 X 1
1a·----------
19 X 19 X 1
20" - - - - - - - - - -
21X21X1
* 24"----------
25X25X1
SEE ISO FOR TRUNNION SIZE
*
ALL LARGER lRUNNIONS-BASE PLATE SIZE = O.D.+ 1" X 1 1/4" lHICK
1 1/4"
I
----."'-lRUNNION & BASE PL.
r-!
f
---+---$1
' '
I
I
' '
+- -I
-t--+--t-
1/4"
(3/4" DIA. ANCH. BOLTS, NUTS AND WASHERS NOT FURNISHED lHIS DRAWING)
DRILLED BASE PLATE NOTE: 1. DO NOT DRILL BASE PLATE HOLES UNLESS CALLED FOR ON ISO. 2. lRUNNION CALL OUT AS PER PAGE 14 OF 14
DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
PNFSOSO OCT 2004 PAGE 13 OF 14
PROCESS INDUSTRY PRACTICES 1-----F_A_B_R_Ic_A_T_Io_N...:./_I_Ns_T_A_L_LA_T_I_o_N_DE_T_A_IL_s_ _--1 TYPICAL TRUNNION DESIGNATIONS ON ISOMETRIC PIPING DRAWINGS, TR-3
PNFSOSO ocT 2004 PAGE
14
OF
14
CALL OUT
IK TYPE (FROM PNFSOOOO) lRUNNI~
10 - (80) - 24 -
X
I
PIPE SIZE - - - - - - '
lRUNNION PIPE sa-IEDULE - - - - - - - - ' X = NO
w-
LENGTH~i:IR~d
PAD WIDTH
FR~ PN~8
PAGE 12 OF 14
./~
r
)/1• (80 0/ J/1
DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
---------' ----------'
I
=-
=-
PNFS0550
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS
' '
OCT 2004 PAGE 1 OF 1
WELDING LUG, ATF-11 (FOR PIPING NPS 3 AND LARGER)
8 MIN.
I
I
ttrc
----$---i/ ' I ' I
t
z ':!!
~
3/16"V
1---
--- r--- ---
1'-
-
"'
Q
ELEVATION
5/8"
PIN OR BOLT 3/4"
1 1/4" 2 1/2" 3"
1/4" 13/16"
MAX. LOAD USER DEFINED USER DEFINED
8
3/4"
7/8"
1 1/4" 2 1/2"
3"
3/8" 15/16"
USER DEFINED
c
7/8"
1"
1 1/4" 2 1/2"
D
1"
TYPE
ROD SIZE
A
E
R
1 1/8" 1 1/2"
1 1/4" 1 3/8"
2"
8 MIN.
D MIN.
T
H
3"
3/8" 1 1/8"
USER DEFINED
3"
3"
1/2" 1 1/4"
USER DEFINED
4"
4"
5/8" 1 1/2"
USER DEFINED
F
1 1/2" 1 5/8" 2 1/2"
5"
4 1/2" 3/4" 1 3/4"
USER DEFINED
G
1 3/4" 1 7/8" 2 1/2"
5"
4 1/2" 3/4"
USER DEFINED
6"
4 1/2" 3/4" 2 3/8" USER DEFINED
H
2"
2 1/4"
3"
2"
I PIPE SUPPORT MARK NO. I
~
TYPE
DIMENSIONS ARE GIVEN IN FlEET AND/OR INCHES.
PNFS0551
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS
')
OCT 2004 PAGE 1 OF 1
WELDING CLIP, ATF-12 (FOR PIPING NPS 3 AND LARGER)
EXISTING SlRUClURE
r
1'--------"----S-----~f--'--.tT
l.j------ I
SPECIFY ON ISO IF OTHER THAN 1/2 LENGTH OF SHOE
I I
I
1C EAR (INSUL.
3/B"t
I
Ii
+
I
2") I I
*
I
EL. y
-------------
-----
L--
I
3"
I.
I I
I
F="
I
I
C4X5.4 _ /
I I
I I I
'""""' 6"
I
L2X2X1/4
I
ELEVATION FPG-178
DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
I
I
I
I I
I
I
I
I
I I
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS GUIDE FOR VERTICAL PIPING, FPG-17 (FOR PIPING UP TO NPS 2 1/2)
PNFS081 OCT 2004 PAGE 3 OF 3
r - - - EXISTING COLUMN
PLAN
PLAN
FPG-17-C (ALTERNATE CONN. FOR FPG-17A) FPG-17-D (ALTERNATE CONN. FOR FPG-178)
FPG-17-E (ALTERNATE CONN. FOR FPG-17A) FPG-17-F (ALTERNATE CONN. FOR FPG-178)
1" CLEAR
:=..;;-',! I
I I I
"....--
'
G
I
"'-H
Jr
F
i(
I
-~
i\ ' (
I( I
I
!
J'
8
I' (> I( I' >
I I I I I I
:
I
!(
I I
rI-
I
"'-H
r
JI' HOLD DOWN I
Jr'
8
HOLD DOWN II FPG-29A & FPG-298
MARK NO. FPG-29A-1 FPG-298-1 FPG-29A-1 1/2 FPG-298-1 1/2 FPG-29A-2 FPG-298-2
PIPE SIZE
A
8
c
D
E
F
G
H
R
T
1"
7 3/8"
2 1/2"
1 3/8"
3"
5/16"
2 1/2"
1 1/4"
15/16"
11/16"
3/16"
1 1/2"
a·
2 13/16"
2"
3"
1/2"
2 1/2"
1 1/4"
15/16"
1"
3/16"
2"
9 5/8"
3 3/8"
2 3/8"
3 5/8"
11/16"
3 1/2"
1 1/2"
1 1/16" 1 7 /32"
HOLD DO\\'Iol
I
DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
1/4"
li
')
PROCESS INDUSTRY PRACTICES 1-----F_A_B_R_Ic_A_T_Io_N--'/_I_N_sT_A_L_LA_TI_o_N_D_ET_A_I_Ls_ _--l WELDING LUG, ATF-1 (FOR PIPING UP TO NPS 2 1/2)
PNFS0850 ocT 2004 PAGE
8 MIN.
I
I
--
ttl --~--
'=f./
t
c~
1---
---r------
- - 1'-
~
'
I
i ELEVATION
ROD SIZE
PIN OR BOLT
A
MAX. LOAD (USER DEFINED) 3/8" 1/2" 1 1/4" 2 1/2" 3" 1/4" 9/16" USER DEFINED
8
1/2"
5/8" 1 1/4" 2 1/2" 3" 1/4" 11/16" USER DEFINED
TYPE
R
8 MIN.
~
3/16"V
D MIN.
T
H
I PIPE suPPORT MARK No.I
~TYPE DIMENSIONS ARE GIVEN IN FlEET AND/OR INCHES.
1
OF
1
=-
=-
' ' v
--
,V
TYP. 3/16"
PNFS0851
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS
OCT 2004 PAGE 1 OF 1
WELDING CLIP, ATF-2 (FOR PIPING UP TO NPS 2 1/2)
(l
rr
s
----
_l'"~" ·~="
I '
I ' I ' I :i I :i
I ' I ' I ' ---,--1--r---
<
: I :
w
'
j
!
B/2
,L B
l
'
ELEVATION
TYPE
ROD SIZE
A
B
s
T
z
MAXIMUM RECOMMENDED LOAD (USER DEFINED)
A
3/8" 2 7/8"
2"
1 1/4"
1/4"
7/16"
USER DEFINED
B
1/2" 2 7/8"
2"
1 1/4"
1/4"
9/16"
USER DEFINED
IPIPE
SUPPORT MARK No.I
~
TYPE
DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
=-
=-
PNFS0852
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS
' '
OCT 2004 PAGE 1 OF 1
WELDING CLIP, ATF-3 (FOR PIPING UP TO NPS 2 1/2)
[_~'~"=~ ---
/
' ~.':',"
~-~
r H
::.:.
~:;
r--< ........
f~J
c ~
rc
rc
.._
rc
__
"'
w ---$ I :
j
r-:J
s
------------
TYP~ ,. 3/16
(
-
r
! B/2
L
'I B
l
'
ELEVATION
TYPE
ROD SIZE
BOLT SIZE
R
B
D MIN.
s
T
H
MAXIMUM RECOMMENDED LOAD (USER DEFINED)
A
3/8" 1/2"X 2 1/2"
7/8"
2"
2"
1 1/4"
1/4"
9/16"
USER DEFINED
B
1/2" 5/8"X 2 1/2"
7/8"
2"
2"
1 1/4"
1/4"
11/16"
USER DEFINED
I PIPE SUPPORT MARK No.I
~
TYPE
DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS HANGER ATTACHMENT, ATF -4 (FOR PIPING UP TO NPS 2 1/2)
PNFS085 OCT 2004 PAGE 1 OF 1
EXISTING CHANNEL --r.. L2 1/2X2 1/2X5/16
I
I
t================== =:J
I I I I
3/16"
.,l I I EL. y
I I I I
6"
r
J,.. I I
I I
I I I
----------1 ---------, I
'
11/'r
ELEVATIONS
ALTERNATE CONNECTION
ATF-4A
ATF-4B
DESIGN LOAD: MAX. LOAD (USER DEFINED) = USER DEFINED NOllES: 1.) EXISTING BEAM SHALL BE INVESTIGAllED FOR ADDITIONAL ECCENllRIC LOAD. 2.) THE FOLLOWING DIMENSIONS AND/OR INFORMATION ARE SHOWN ON PIPING DRAWINGS: EL. Y
I PIPE suPPORT MARK No.I
~~E "\._
HOLEDIA. (LAST LETllER ONLY)
DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
PNFS085
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS
OCT 2004 PAGE 1 OF 3
HANGER ATTACHMENT, ATF-7 (FOR PIPING UP TO NPS 2 1/2)
EXISTING BEAM~
!
TIll
L3X 3X 3/8 HOLE DIA.
=
BOLT DIA.
Iii '
A
1'-6" MAX.
ELEVATION A11F-7A
NOTE:
DESIGN LOAD:
1.)
EXISTING SUPPORTING MEMBERS TO BE CHECKED FOR ADDITIONAL PIPING LOAD AND TORSION.
2.}
THE FOLLO'MNG DIMENSIONS AND/OR INFORMATION ARE SHOWN ON PIPING DRA'MNG:
MAX. VERT.
LOAD (USER DEFINED) = USER DEFINED
EL. y
I PIPE suPPORT MARK No.I
IATIF-7~ A TYPE (LAST LETTER ONLY} DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
+ 1/16"
PROCESS INDUSTRY PRACTICES 1-----F_A_B_R_Ic_A_T_Io_N--'/_I_N_sT_A_L_LA_TI_o_N_D_ET_A_I_Ls_ _--l HANGER ATTACHMENT, ATF-7 (FOR PIPING UP TO NPS 2 1/2)
PNFS085 ocT 2004 PAGE
2
OF
3
L3X 3X 3/B HOLE DIA. = BOLT DIA.
A
1'-6" MAX.
ELEVATION ATF-78
DESIGN LOAD: MAX. VERT.
LOAD (USER DEFINED) = USER DEFINED
DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
+
1/16"
PROCESS INDUSTRY PRACTICES 1-----F_A_B_R_Ic_A_T_Io_N--'/_I_N_sT_A_L_LA_TI_o_N_D_ET_A_I_Ls_ _--l HANGER ATTACHMENT, ATF-7 (FOR PIPING UP TO NPS 2 1/2)
PNFS085 ocT 2004 3 3 PAGE OF
/.L3X 3X 3/8
1'-6" MAX. A
(l
'
EXISTING BEAM
-----111
ATF-1
JL i '
I
ELEVATION ATF-7C
DESIGN LOAD: MAX. VERT.
LOAD (USER DEFINED) = USER DEFINED
DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
PNFS0857
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS
OCT 2004 PAGE 1 OF 1
SPECIAL STEEL WASHER PLATE, ATF-8 (FOR PIPING UP TO NPS 2 1/2)
w
r t
~ :1:
--,
2 W/
f
-m-:-m-v1
II
i i
j'
II
i
----+ ~---$-~:-
-Jt------
1I
I
!
~-----
I I
lJ- I Li 1
I
I
EXISTING STEEL
,.
! '"'"V
~-
PLAN
ELEVATION
DIA. ROD
H DIA.
D/D
TYPE
WXT
A
BAR 3"X 1/4"
3/B" 7/16"
B
BAR 3"X 1/4"
1/2" 9/16" 1 1/2"
1"
MAX. ALLOW. LOAD LBS. II USER DEFINED USER DEFINED USER DEFINED
I PIPE suPPORT MARK No.I
~TYPE DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
PNFS0859
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS
')
OCT 2004 PAGE 1 OF 1
HANGER ATTACHMENT, ATF-10 (FOR PIPING UP TO NPS 2 1/2)
II
T
--------------~
HOLE DIA. H--.........
'""""-""t-'"'"':7-- -----------, ~ 10
~
<
'
I!! 0
... "' o
z
I
---~ ~-~ ~~~=-~ ~ -~--LSPECIFY IF OTHER THAN 4" {DIM. A v.1LL CHANGE).
ELEVATIONS liQlE
1) FOR INSULAllON THICKNESS OVER 3 1/2" A DIMENSION SHALL BE 7"
A
NOMINAL PIPE H SIZE UP TO 1 1/2" 9/16"
1/2"
2"X 1/4"
5"
8
2" TO 2 1/2" 9/16"
1/2"
3"X 1/4"
5"
TYPE
I PIPE suPPORT MARK No.I
IATIF-10~ TYPE DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
PNFS0861
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS
OCT 2004 PAGE 1 OF 1
HANGER ATTACHMENT, ATF-11 (FOR PIPING UP TO NPS 2 1/2)
II___
,__
HOLE DIA. H
I
3/1
'
--f~-~F~~ ~'II.......J~
i
/~ ~mornrn ..
LONG RADIUS ELBOW UNLESS OTHERWISE SPECIFIED
,I '
I I
,
1
I I
THAN 6" {DIM. A WILL CHANGE).
I
~
I
~
I
i
ELEVATIONS t:!.QIE 1) FOR INSULAllON THICKNESS OVER 3 1/2" A DIMENSION SHALL BE 9"
A
NOMINAL PIN OR BAR SIZE H PIPE BOLT B X T A SIZE DIA. UP TO 1 1/2" 9/16" 1/2" 2"X 1/4" 7"
B
2" TO 2 1/2" 9/16"
TYPE
I
I
1/2"
3"X 1/4"
I PIPE suPPORT MARK No.I
I AllF-11 .::J A ~TYPE DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
7"
PROCESS INDUSTRY PRACTICES 1-----F_A_B_R_Ic_A_T_Io_N--'/_I_N_sT_A_L_LA_TI_o_N_D_ET_A_I_Ls_ _--l BRACE FOR RELIEF VALVE, ATF-14 (FOR PIPING UP TO NPS 2 1/2)
PNFS086 ocT 2004 1 1 PAGE OF
~
- - - - - ----rr------ -
'
~----~-J-: ~~~ ~-~REUEF ,., ~
I
I
~=H
PIPE SIZE VARIES
(TYP.)
'
BAR 2"X 1/4"
CUT--------~~g
FIELD TO SUIT (TYP .)
'
!
I
4J
~
i I' ELEVATION
SECTION 'A-A'
I PIPE suPPORT MARK No.I
I ATF-141 DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
VALVE
PNFS086
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS
OCT 2004 PAGE 1 OF 1
BRACKET, ATF-17 (FOR PIPING UP TO NPS 2 1/2)
A PIPE RADIUS
A
I ,
MIN.
I'
~
i"l
TO FIT
3" MIN.
LONG RADIUS ELBOW UNLESS NOTED IN REMARKS.
I
i ~ llilli~ I/
I
SHOP CUT-....
PIPE RADIUS
3"
i
I
'
117'""--il--;
:
EL. y
-,
I I I ' I I
I
I
~ '
EL. y
I II-EXISTING STEEL
.Jl_ I
C-1-~
I
ELEVATION
ELEVATION
ATF-17A & ATF-178
ATF-17C & ATF-17D
TYPE
MEMBER SIZE
PIPE SIZE
A
L 1 1/2X 1 1/2X 1/4
UP TO 1 1/2"
B
L 1 1/2X 1 1/2X 1/4
UP TO 1 1/2"
c
L 2 1/2X 2 1/2X 5/16
2" & 2 1/2"
D
L 2 1/2X 2 1/2X 5/16
2" & 2 1/2"
1.) THE FOLLOI'I1NG DIMENSIONS AND/OR INFORMATION ARE SHOWN ON PIPING DRAI'I1NG: EL. y
I PIPE suPPORT MARK No.I
IATF-17~ TYPE DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
PNFS0900
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS
OCT 2004 PAGE 1 OF 1
FORGED STEEL CLEVIS, CLF (FOR PIPING UP TO NPS 2 1/2)
PNC00004
I l ~~,{
------------------------4-
• ' •
:._\_'
J
r-----
· i ·
I
i
I
l"J
r=~-~ ~-----1---=-::--~~
TYPE MAX. TAP MAX. PIN A NO. SIZE IN. Sl~~- p INCHES
'
1
;= ______
[~==--J
l'=U-==--l
0
D H T W MAX. LOAD INCHES INCHES INCHES INCHES 650' F. 750' F.
1
3/B"
1/2"
3 11/16"1 7/16
5/B"
5/16" 1 1/16"
610
540
2
1/2"
5/B"
3 11/16"1 7/16
5/B"
5/16" 1 1/16" 1130
1010
I PIPE suPPORT MARK No.I
~TYPE
N0.1 OR 2
DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
PNFS0901
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS
OCT 2004 PAGE 1 OF 1
STANDARD U-BOLT, UBF (FOR PIPING UP TO NPS 2 1/2)
c
w 0
DIMENSION
SIZE
NPS
ROD SIZE
c
D
3/4
3/4"
1/4"
1 3/8"
2 3/4"
E 2 1/8"
1
1"
1/4"
1 5/8"
2 3/4"
2 1/8"
1 1/4
1 1/4"
3/8"
2 1/16" 2 7/8"
2 1/8"
1 1/2
1 1/2"
3/8"
2 3/8"
2 1/2"
2
2"
2 1/2
2 1/2"
3"
3/8" ~ 13/16" 3 1/4" 1/2"
3 3/4" 3 7 /16"
2 1/2" 3"
I PIPE suPPORT MARK No.I
luBF-~PS SIZE DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS STRAIGHT OR EYE ROD, RF /HF (FOR PIPING UP TO NPS 2 1/2)
A
w
WELD
EYE ROD TYPE HF
A
L
c
STRAIGHT ROD TYPE RF
TYPE
D E L EYE-ROD STR-ROD {DIA.) {DIA.) {LENGTH)
MAX. LOAD 650" F
650" F
HF-1A
RF-1A
3/B" 9/16"
2 1/2" USER DEFINED USER DEFINED
HF-2A
RF-2A
1/2" 1/16'
2 1/2" USER DEFINED USER DEFINED
I PIPE suPPORT MARK No.I
~ '\2:
• UB-TYPE {1A OR 2A) TYPE {HF OR RF) DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
PNFS090 OCT 2004 PAGE 1 OF 1
PNFS091
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS
OCT 2004 PAGE 1 OF 1
PIPE SHOE, FS-1 A THROUGH FS-1 D (FOR PIPING UP TO NPS 2 1/2)
t
1/4" X L
BANDING SLOT
NOTES: D
L
L1
A
4"
1'-o'"
5"
8
4"
1'-6"
B"
c
6"
1'-o·
5"
D
6"
1'-6'"
B"
TYPE 1.)
UNLESS OTHERWISE SPECIFIED ON PIPING DRAWINGS: FOR TEMPERATURES UP TO 350~ USE 12" LONG SHOE. FOR TEMPERATURES 350~ TO 750~ USE 1'-6" LONG SHOE.
I PIPE suPPORT MARK No.I
I FS-1-,.~IZE TYPE
DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
PNFS0911
PROCESS INDUSTRY PRACTICES FABRICATION/INSTALLATION DETAILS CLAMPED SHOE, FS-1J THROUGH FS-1N (FOR PIPING UP TO NPS 2 1/2)
OCT 2004 PAGE 1 OF 1
SPECIFY CLAMP TYPE & SIZE ON PIPING DRAWING. PER MSS SP-5a 45'
it
1/4" X
BANDING SLOT
NOTES: D
L
L1
J
4"
1'-0"
5"
K
4"
1'-6"
a·
M
6"
1'-0"
5"
N
6"
1'-6"
a·
TYPE 1.) UNLESS OlHERWISE SPECIFIED ON PIPING DRAWINGS: FOR TEMPERATURES UP TO 350'F USE 12" LONG SHOE. FOR TEMPERATURES 350'F TO 750'F USE 1' -6" LONG SHOE. 2.) NO GALVANIZING IS PERMITTED FOR ANY COMPONENT IF STAINLESS STEEL CLAMP IS SPECIFIED.
I PIPE suPPORT MARK No.I
IFS-1-~IZE TYPE DIMENSIONS ARE GIVEN IN FEET AND/OR INCHES.
View more...
Comments
