Pines y Seguros Hensley

All manufacturer’s names, numbers, symbols, and descriptions are used for reference purposes only, and it is not implied that nay part listed is the product of these manufacturers.

Safety First: Hensley recommends that you use a soft-faced hammer and ANSI-approved (Z87.1) eye protection while using our products.

*All parts are shown full scale except where indicated.

Pin & Fastener Catalogue Table of Contents Adapter Locking Systems .................. 5 Amsco Style ................................. 7 - 10 Caterpillar Style........................... 11- 20 John Deere Style ........................ 21- 22 Esco Style .................................. 23 - 42 H & L Style ................................. 43 - 46 Hendrix Style ............................. 47 - 52 Hensley ...................................... 53 - 96 Komatsu Style.......................... 97 - 100 Miscellaneous ........................ 101 - 104 Page Style .............................. 105 - 106 Pin Removal Tools ................. 107 - 108 Index ...................................... 109 - 110

Adap. Locking Systems

Adapter Locking Systems ADAPTER FASTENER P236 B

ADAPTER FASTENER P136 A C-19 LIP ADAPTER 24-4L 29-4L 35-5L 39.5-5L 41-6L

Flex Pin: This flex pin is used to secure Hensley C-19 and C-29 stake type adapters to the lip. The pin is designed to stay flush with the top and bottom of the lip without having to bend tabs or constantly maintain a two piece spool and wedge assembly.

A

136X290 136X310 136X330 136-35HX 136-215

K119 (pg. 76)

2

ESCO STYLE ADAPTER 119-35HX 129-40HX 129-45HX

K133-2 (pg. 74)

133X400

133-45HX

K209 (pg. 75)

209X400

K292/K233 (pg. 75)

233X400 292X400

K158 (pg. 77)

157X475 158X475 257X600

K218 (pg. 76)

218X475

WP45W (pg. 77)

208X600

418WAW, 418W2W, 418CLAC 2 1

pg. 60

129X330 129X400

435W, 435CL 1

These positive locking fasteners are used to attach adapters to zipper style lips. The C-Clamp installs first, wrapping around the adapter "legs" for a secure fit. The wedge is then driven in to lock the assembly securely onto the lip.

236X330 236X400 236-40HX 236-45HX 236-225 236-235

K129C (pg. 74)

FASTENER

C-Clamp and Wedge:

24-3L 30.5-4L 33.5-4L 39.5-5L 45.5-5L

HENSLEY PARABOLIC® ADAPTER 119X300 119X310

WEDGE KEY

This one-piece locking device is used to attach stake type adapters to the bucket lip. After the adapter is installed, the tab portion of the key is bent over to lock the adapter securely in place.

ADAPTER

pg. 56 B

Wedge Key:

C-29 LIP

HENSLEY PARABOLIC® ADAPTER 414X400 415X400 418X475 419X475

157-55HX

ESCO STYLE ADAPTER

418-55HX 419-55HX

pg. 51 pg. 52, 53

5

5

6

6

Adap. Locking Systems

Amsco Style Pins & Rubber Locks Amsco Style

Pin 5/8" (16)

2-19/32" (66)

Rubber Lock 3/4" (19)

1-1/8" (29)

9/10P (22-0090) [Pin]

1-3/16" (30) 11/16" (17)

1-3/8" (35) 11/16" (17)

9/10R (22-0150) [Rubber Lock]

9/16" (14)

3" (76)

15/16" (24)

1-1/4" (32)

11P (22-0100) [Pin] 1-3/8" (35) 1-9/16" (40)

13/16" (21)

11R (22-0160) [Rubber Lock] 13/16" (21)

5/8" (16)

3-3/8" (86) 1-7/32" (31) 1" (25)

12P (22-0110) [Pin]

1-9/16" (40) 1-3/4" (44)

13/16" (21)

12R (22-0170) [Rubber Lock]

7

7

Amsco Style Amsco Style

Pins & Rubber Locks (Cont.) 7/8" (22)

3-7/8" (98)

1-1/4" (32)

13/14P (22-0120) [Pin] 1-11/32" (34)

2-3/32" (53)

29/32" (23)

13/14R (22-0180) [Rubber Lock]

1" (25)

5" (127)

1-3/8" (35)

15P (22-0130) [Pin]

1-9/16" (40)

2-1/4" (57) 8

8

151R (22-0240) [Rubber Lock]

1-7/16" (37)

Amsco Style Pins & Rubber Locks (Cont.) Amsco Style

1-1/8" (29)

5-1/8" (130)

1-3/8" (35)

W15P (22-0300) [Pin]

1-9/32" (33)

6-3/8" (162)

1-3/8" (35)

16P (22-0140) [Pin]

1-13/16" (46)

2-3/4" (70)

161R (22-0250) [Rubber Lock]

1-21/32" (42)

9

9

10

10

Amsco Style

Caterpillar Style Flex Pin 1-1/16" (27)

Caterpillar Style

4-3/8" (111)

3/4" (19)

5J9000P (30-0260) [Fastens 7J3310HX, 7J3312HX, and T7J3312 Ripper Teeth]

Modulok Style Pins for Vertical Protector 1-1/8" 3/4" (29) (19) Dia. Dia.

3-3/8" (86)

9J8442P (30-2140) [Requires a 6Y9459W Retainer, pg. 13]

1" (25) Dia.

1-3/8" (35) Dia.

4-1/8" (105)

1U0739P (30-1930) [Requires an 8E5559W Retainer, pg. 13]

8E4708P (30-5060) [Requires a 4T4707W Retainer, pg. 14]

11

11

Caterpillar Style Pin & Retainer

Caterpillar Style

7/16" (11) Dia. 2-5/16" (59)

Pin

9W7112P (30-1840)

Recessed Lock Washer 9/16" (14) Dia.

2-5/8" (67)

6Y3228P (30-4570)

9/16" (14) Dia.

3-1/8" (79)

9J2258 (30-0920)

3/4" (19) Dia.

3-7/16" (87)

9J6583P (30-0940)

9/16" (14) Dia.

3-5/8" (92)

9J2308P (30-0930)

9W2678P (30-4070) 12

12

Caterpillar Style Pin & Retainer (Cont.)

Caterpillar Style

9J2358P (30-0250)

1" (25) Dia.

4-5/16" (110)

6Y3394P (30-5620)

7/8" (22) Dia.

4-5/8" (117)

7T3408P (30-4420)

3/4" (19) Dia.

5-1/4" (133)

6Y2527P (30-0230)

15/16" (24) Dia.

5-1/4" (133)

8E0468P (30-4160)

13

13

Caterpillar Style Pin & Retainer (Cont.)

Caterpillar Style

1-1/8" (29) Dia.

1" (25) Dia.

1-1/4" (32) Dia.

7-5/8" (194)

5-5/8" (143)

6-3/8" (162)

6Y3909P (30-6040) 6Y8558P (30-0400)

6I6608P (30-5430)

14

14

Caterpillar Style Pin & Retainer (Cont.) 13/32" (10) Dia.

3/4" (19) Dia.

Caterpillar Style

9/32" (7)

4T0001W (30-1850) 17/32" (13) Dia. 17/32" (13) Dia.

1-1/8" (29) Dia.

1-3/16" (30) Dia.

11/32" (9)

3G9609W (30-0370) 3G9609WHR (30-5280) [Harder Rockwell]

11/32" (9)

8E6259W (30-4580) 27/32" (21) Dia.

23/32" (18) Dia.

1-9/16" (40) Dia.

1-1/2" (38) Dia.

11/32" (9)

6Y9459W (30-0240) 6Y9459WHR (30-5290) [Harder Rockwell]

11/32" (9)

7T3409W (30-4430) 7T3409WHR (30-5310) [Harder Rockwell]

31/32" (25) Dia.

29/32" (23) Dia.

2" (51) Dia. 1-11/16" (43) Dia.

11/32" (9)

8E0469W (30-4170) 8E0469WHR (30-5320) [Harder Rockwell]

11/32" (9)

8E5559W (30-0410) 8E5559WHR (30-5300) [Harder Rockwell]

15

15

Caterpillar Style Pin & Retainer (Cont.) 1-5/32" (29) Dia.

Caterpillar Style

2-1/4" (57) Dia.

6I6609W (30-5440)

1-7/32" (31) Dia.

5/16" (8)

2-1/2" (64) Dia.

4T4707W (30-3930)

3/8" (10)

Pins & Rubber Locks 31/32" (25)

1-3/4" (44)

Pin

1/2" (13)

Rubber Lock

4K41LK (30-0780) [Rubber Lock]

3/4" (19)

2-11/16" (68) 16

16

4K43P (30-0760) [Pin]

5/16" (8)

Caterpillar Style Pins & Rubber Locks (Cont.)

Caterpillar Style

1-1/16" (27)

9/16" (14)

1-31/32" (50)

4K8LK (30-0790) [Rubber Lock]

13/16" (21)

3-1/8" (79)

7/16" (11)

4K32P (30-0770) [Pin]

Pins & Rubber Plugs 3K1P (30-0210) [Used with R2R Rubber Plug detailed on pg. 28]

3K2P (30-0220) [Used with R2R Rubber Plug detailed on pg. 28] 3/4" (19)

2-1/4" (57)

2-3/4" (70) 2-7/16" (62)

23/32" (18)

3/8" (10)

3/8" (10)

17

17

Caterpillar Style Pins with Snap Rings

Caterpillar Style

8J1433P (30-0310)

6J8811P (30-1180)

7J9600P (30-0290)

3G0500P (30-1120)

18

18

6Y2443P (30-3770)

Caterpillar Style Scarifier Shank Wedges 1D3537HX (30-0870)

Caterpillar Style

1" (25) 8-1/16" (205)

1-1/4" (32)

5K1459W (30-0880) 2" (51)

4-1/2" (114)

1" (25)

11/16" (17)

11/16" (17)

19

19

Caterpillar Style Straight Pins 3/4" (19) Dia.

Caterpillar Style

3-25/32" (96)

7K9535P (30-3700) [Used on compactor feet.]

7K9937P (30-6000) [Used on compactor feet.]

Straight Pin with Cotter

1-3/4" (44)

5-7/32" (133) 6-1/2" (165)

20

20

2K6413P (30-4660) [Used with ripper shank 9J6586HX. Requires (2) Cotter Keys #3R5325P (30-4670) {3"x15/32"}.]

John Deere Style Pin & Retainer

112195P (44-0260)

7/16" (11) Dia.

112196W (44-0250)

1" (25)

John Deere Style

3" (76) 7/32" (6)

15/32" (12)

Roll Pins

U15522P (44-0030)

56725P (44-0050)

21

21

22

22

John Deere Style

Esco Style Pins & Rubber Locks Rubber Lock

Pin

1/2" (13) 2-1/16" (52)

1/4" (6)

18-20MPNP (26-1210)

Esco Style

18-20MLKR (26-1200)

25/32" (20)

2-13/16" (71)

3/8" (10)

25/30PNP (26-0650)

25/30LKR (26-0710)

29/32" (23)

7/16" (11)

3-5/16" (84)

35PNP (26-0660)

1" (25)

1-7/8" (48)

5/16" (8)

35/40LKRR (26-3320)

35/40LKR (26-0720)

27/32" (21)

3-1/4" (83)

7/16" (11)

35PNRP (26-3330)

23

23

Esco Style Pins & Rubber Locks (Cont.)

5/8" (16)

2-1/8" (54)

1/2" (13)

36LKR (26-2650)

Esco Style

3/4" (19)

3-5/16" (84)

1/4" (6)

36PNP (26-2640)

1-3/16" (30)

1/2" (13)

3-3/4" (95)

40PNP (26-0670) 5/16" (8)

1-3/16" (30)

1/2" (13)

3-3/4" (95)

40PNRP (26-3340)

1-3/16" (30)

3-5/8" (92)

7/8" (22)

44DLKR (26-3000) 24

24

Esco Style Pins & Rubber Locks (Cont.)

1-3/16" (30)

1/2" (13)

5-3/4" (146)

44DPNP (26-2990)

Esco Style

1-3/8" (35)

9/16" (14)

4-1/4" (108)

45PNP (26-0680)

1-3/32" (28)

2-3/16" (56)

5/8" (16)

45LKRR (26-3030)

3/8" (10)

1-3/8" (35)

4-1/8" (105)

9/16" (14)

45PNRP (26-3020)

25

25

Esco Style Pins & Rubber Locks (Cont.)

1" (25)

5/8" (16)

2-5/16" (59)

45LKR (26-0730)

Esco Style

31/32" (25)

5/8" (16)

3" (76)

46LKR (26-1620)

29/32" (23)

3/8" (10)

4-1/2" (114)

46PNP (26-1630)

1-1/4" (32)

2-7/16" (62)

11/16" (17)

50LKRR (26-3050) 3/8" (10)

1-15/32" (37)

4-3/4" (121)

50PNRP (26-3040) 26

26

5/8" (16)

Esco Style Pins & Rubber Locks (Cont.)

1-3/16" (30)

11/16" (17)

2-7/16" (62)

50LKR (26-0740)

Esco Style

1-15/32" (37)

5/8" (16)

4-9/16" (116)

50PNP (26-0690) 11/16" (17) 1-7/32" (31)

2-9/16" (65)

3/8" (10)

55LKRR (26-2490)

7/16" (11)

1-19/32" (40)

5-1/8" (130)

11/16" (17)

55PNRP (26-2500)

27

27

Esco Style Pins & Rubber Locks (Cont.)

1-1/4" (32)

2-9/16" (65)

3/4" (19)

55LKR (26-0750)

Esco Style

3/8" (10)

1-5/8" (41)

5-1/8" (130)

11/16" (17)

55PNP (26-0700)

1-1/4" (32)

3-3/4" (95)

7/8" (22)

56LKR (26-1650)

1-3/16" (30)

5-3/4" (146)

56PNP (26-1660) 28

28

1/2" (13)

Esco Style Pins & Rubber Locks (Cont.)

1-1/2" (38)

3-5/8" (92)

1-1/16" (27)

65LKR (26-1870)

6-5/16" (160)

Esco Style

1-9/16" (40)

3/4" (19)

65PNP (26-1860) 1/2" (13)

2-1/8" (54)

27/32" (21)

6-1/8" (156)

70PNP (26-0770)

1-3/8" (35)

3-5/16" (84)

1" (25)

70LKR (26-0780)

29

29

Esco Style Pins & Rubber Plugs R2P (26-0180) [Pin]

R3P (26-0190) [Pin] 3/8" (10)

R2R (26-0280) [Rubber Plug] 5/8" (16)

1/2" (13)

7/16" (11)

1/2" (13)

3/4" (19) 3/4" (19) 2-11/16" (68)

1-1/16" (27) 2-3/8" (60)

Esco Style

1/2" (13)

R6P (26-0220) [Pin] 11/16" (17)

R5P (26-0210) [Pin] 1" (25)

R4P (26-0200) [Pin] 3/4" (19)

11/16" (17)

R4R (26-0290) [Rubber Plug]

15/16" (24)

1-15/32" (37)

1-1/8" (29)

30

30

13/16" (21)

1" (25)

4-1/4" (108) 3-3/4" (95)

3-3/8" (86) 15/16" (24)

3/4" (19)

11/16" (17)

Esco Style Ripper Pins & Bushings

1-3/16" (30)

5" (127)

39RSPP (26-3230) [Ripper Pin] Bushing

Esco Style

Pin

1/2" (13) Dia. 3-1/4" (83)

22RPGP (26-3790) [Pin]

13/16" (21) Dia.

2-7/32" (56)

22RBGB (26-3780) [Rubber Bushing] 1/4" (6) 17/32" (13) Dia. 3-11/16" (94)

25RP (26-0300) [Pin]

13/16" (21) Dia.

2-7/16" (62)

25RB (26-0310) [Rubber Bushing]

31

31

Esco Style Ripper Pins & Bushings (Cont.) 3/4" (19) Dia.

2-7/16" (62)

25RBS (26-1970) [Steel Bushing]

17/32" (13) Dia.

Esco Style

4-3/4" (121)

35RP (26-0250) [Pin]

13/16" (21) Dia.

3-3/16" (81)

35RB (26-0260) [Rubber Bushing]

3/4" (19) Dia.

3-3/16" (81)

35RBS (26-1980) [Steel Bushing]

1/2" (13) Dia.

5-1/4" (133)

39RP (26-3390) [Pin]

13/16" (21) Dia.

3-1/2" (89) 32

32

39RB (26-3400) [Rubber Bushing]

Esco Style Spool & Wedge Assemblies Wedge

Spool

20SPS (26-6180)

20W1W (26-6190)

Esco Style

9/16" (14)

15/16" (24)

3-5/8" (92)

1-1/8" (29)

4-1/2" (114)

3/4" (19)

33

33

Esco Style Spool & Wedge Assemblies (Cont.) 29W1W (26-6760) [Standard Wedge]

29W2W (26-2000) [Over Size Wedge]

29SPS (26-2010) [Spool]

1-7/8" (48)

1-5/32" (29)

11/16" (17)

Esco Style

1-25/32" (45)

7-1/2" (191)

7-1/2" (191)

1-5/32" (29) 34

34

1-1/4" (32)

5-5/8" (143)

Esco Style Spool & Wedge Assemblies (Cont.) 58W3W (26-2770) [Over Size Wedge]

58W2W (26-2270) [Over Size Wedge]

3/4" (19)

2-1/4" (57)

11/16" (17)

2-3/16" (56)

Esco Style

7-5/8" (194)

35

35

Esco Style Spool & Wedge Assemblies (Cont.) 58W1W (26-2260) [Standard Wedge]

3/4" (19)

11/16" (17)

Esco Style

2-1/16" (52)

36

7-5/8" (194)

36

58SPS (26-2250) [Spool]

Esco Style Spool & Wedge Assemblies (Cont.) 70W1W (26-5190) [Standard Wedge]

70SPS (26-5180) [Spool]

7/8" (22)

1" (25)

Esco Style

6-11/16" (170)

1-13/16" (46)

7-5/16" (186)

1-11/32" (34)

37

37

Esco Style Tang & Key Assemblies

2-3/8" (60) [4K] 2-5/16" (59) [3K] 2-1/4" (57) [2K] 2-3/16" (56) [1K]

Esco Style

29-1KW (26-4100) [Standard] 29-2KW (26-4110) [Oversize] 29-3KW (26-4120) [Oversize]

6-1/4" (159)

29-4KW (26-4130) [Oversize]

58TT (26-4140) 1-11/16" (43) [1K] 1-3/4" (44) [2K] 1-13/16" (46) [3K] 1-7/8" (48) [4K]

38

38

Esco Style Slag Pins / 2-Piece 70PLP (26-5170)

70W2W (26-4660) [Over Size]

7/8" (22)

1-3/16" (30)

1-3/8" (35)

2-5/8" (67)

3-3/8" (86)

Esco Style

6-11/16" (170)

1-15/32" (37)

39

39

Esco Style Slag Pins / 2-Piece (Cont.) 50SLKR (26-3860)

21/32" (17)

50PNTP (26-3850)

3/8" (10)

1-5/8" (41) 1-5/16" (33)

Esco Style

6-3/4" (171)

40

40

Esco Style Slag Pins / 2-Piece (Cont.) 55SLKR (26-1330)

55PNTP (26-1360)

5/8" (16)

7/16" (11) 1/4" (6) 1-3/4" (44) 1" (25)

7-1/2" (191)

2-3/4" (70)

Esco Style

1-11/32" (34)

41

41

Esco Style Slag Pins / 3-Piece 55PLP (26-1300)

55W1W (26-1230)

11/16" (17)

SP55P (26-1220)

11/16" (17)

1-3/32" (28)

15/16" (24)

31/32" (25)

Esco Style

2" (51)

2-3/4" (70)

5-1/4" (133)

4-11/16" (119)

1-3/32" (28)

Wedge

Plug Spool

42

42

H & L Style Flex Pins 13/16" (21)

1/2" (13)

2" (51)

21/22P (24-0440)

23/32" (18)

13/32" (10)

2-1/4" (57)

23PA (24-1230) [Black, Standard]

H & L Style

23/32" (18)

2-1/4" (57)

13/32" (10)

23PB (24-1240) [Yellow, Reversible]

25/32" (20)

13/32" (10)

2-1/4" (57)

23PC (24-1250) [Blue, Oversize]

25/32" (20)

2-1/4" (57)

13/32" (10)

23PD (24-1260) [Green, Oversize, Reversible]

27/32" (21)

2-9/32" (58)

24PB (24-0930)

1/2" (13)

43

43

H & L Style Flex Pins (Cont.)

27/32" (21)

1/2" (13)

2-27/32" (72)

25/26PB (24-0580)

7/8" (22)

1/2" (13)

2-27/32" (72)

H & L Style

25/26PD (24-1490)

1-5/32" (29)

23/32" (18)

3-1/2" (89)

18P (24-0890)

1-1/16" (27)

4" (102)

3/4" (19)

37/50P (24-0560)

1-5/16" (33)

13/16" (21)

4-3/8" (111) 44

44

36P (24-0550)

H & L Style Flex Pins (Cont.) 7/8" (22)

5/8" (16)

4-1/2" (114)

28P (24-0490)

1" (25)

4-9/16" (116)

11/16" (17)

31P (24-0660)

H & L Style

7/8" (22)

4-7/8" (124)

5/8" (16)

28PL (24-0500)

1-9/16" (40)

5" (127)

1" (25)

308P (24-0600)

1-13/16" (46)

5-1/8" (130)

1-3/32" (28)

38P (24-0570)

45

45

H & L Style Flex Pins (Cont.) 1-3/16" (30)

5-1/4" (133)

23/32" (18)

32P (24-1080)

H & L Style

1-5/8" (41)

5-7/8" (149)

1-3/8" (35)

RX1900P (24-0980)

7/8" (22)

6" (152)

5/8" (16)

28TM (24-1180)

1-1/4" (32)

6-1/8" (156) 46

46

33/35P (24-0530)

7/8" (22)

Hendrix Style Bolt with Nut & Washer

1" (25) Dia.

1-1/2" (38) Sq. Hd.

3" (76) 21/32" (17)

5" (127)

1PBB (28-0440) [with Nut & Washer]

Hendrix Style 1-1/4" (32) Dia.

1-7/8" (48) Sq. Hd.

3-5/8" (92)

7/8" (22)

6-1/4" (159)

114PBB (28-0480) [with Nut & Washer]

47

47

Hendrix Style Flex Pins

1-1/4" (32)

4-1/4" (108)

3/4" (19)

4EP (28-0720)

Hendrix Style

1-11/16" (43)

6" (152)

3/4" (19)

5BP2 (28-0530) [Old Style]

1-29/32" (48)

6-1/8" (156)

5BP (28-0260) [New Style]

48

48

3/4" (19)

Hendrix Style J-Bolt with Nut

5/8" (16)

1-1/8" (29) Dia.

1-3/4" (44) 4" (102)

58J (28-0120)

Hendrix Style

3/4" (19)

2-1/2" (64)

1-3/8" (35) Dia. 5-5/16" (135)

34J (28-0130)

6-5/16" (160)

7/8" (22)

2-3/4" (70)

A478 (28-0570)

49

49

Hendrix Style

Hendrix Style

Wedge Pins

3/8" (10)

Top View

3/4" (19)

1-15/16" (49)

Side View

4-9/16" (116)

6P (28-0140)

50

50

Hendrix Style Wedge Pins (Cont.)

9/16" (14)

Top View

1" (25)

2-7/16" (62)

Side View

5-5/16" (135)

Hendrix Style

7P (28-0150)

9/16" (14)

Top View

1-1/8" (29)

2-11/16" (68)

Side View

5-23/32" (145)

8P (28-0160)

51

51

52

52

Hendrix Style

Hensley XS Tooth Pins

XS04P (2004-0020)

XS05P (2005-0020)

Hensley

XS10P (2010-0020)

XS15P (2015-0020) 53

Hensley XS Tooth Pins (Cont.)

Hensley

XS20P (2020-0020)

XS25P (2025-0020)

XS30P (2030-0020)

54

Hensley XS Tooth Pins (Cont.)

XS40P (2040-0020)

Hensley

XS50P (2050-0020)

XS70P (2070-0020) 55

Hensley XS Tooth Pins (Cont.)

Hensley

XS85P (2085-0020)

56

XS115P (99115-0020) Standard Duty XS115PC (99115-0300) Heavy Duty

XS145P (99145-0020) Standard Duty XS145PC (99145-0400) Heavy Duty XS145PD (99145-0410) Special

Hensley XS Tooth Pins (Cont.)

XS250P (99250-0020)

Hensley

XS340P (99340-0020) Standard Duty XS340PC (99340-0300) Heavy Duty

57

Hensley XS Rotary Pins

XSC12P (9912-0010)

Hensley

TS920P (99920-0030)

TS91120P (991120-0010)

TS1220P (991220-0010) 58

Hensley XS Intermediate Adapter Pins

XS390P (99390-0010)

Hensley

XS640P (99640-0020)

XS800P (99800-0020)

59

Hensley ‘5’ Series Hammerless Pins

Hensley

P295RI (295-0220)

P335RI (335-0220)

P385RI (385-0220)

60

Hensley ‘5’ Series Hammerless Pins

P435RI (435-0220)

P485RI (485-0220)

Hensley 61

Hensley

Hensley

C-Clamp and Wedge Adapter Fasteners

435W (400-0130) [Wedge/Adapter Fastener] 62

435CL (400-0140) [C-Clamp/Adapter Fastener]

Hensley C-Clamp and Wedge Adapter Fasteners (Cont.)

418WAW (475-0280) [Wedge, Standard/ Adapter Fastener]

418CLAC (475-0290) [C-Clamp/ Adapter Fastener]

Hensley 63

Hensley C-Clamp and Wedge Adapter Fasteners (Cont.)

Hensley

418W2W (475-0300) [Wedge, Oversize/ Adapter Fastener]

64

Hensley Flex Pins

P162 (162-0050) [Flex Pin, Reversible, 4-Tab]

225PB (225-0070) [Flex Pin, Reversible, 4-Tab]

501P (14-0170)

601P (14-0280)

Hensley

300PB (300-0070) [Flex Pin, Reversible, 4-Tab]

701P (12-0050)

702P (702-0050)

65

Hensley Flex Pins (Cont.)

1-5/16" (33)

5-1/4" (133)

7/8" (22)

901P (12-0280)

1-1/4" (32)

3-1/16" (78)

9/16" (14)

P290 (290-0020)

Hensley

P290STP (290-0180) [Solid Rubber]

1-9/16" (40)

3-1/2" (89)

1/2" (13)

P350/400 (350-0040)

1-5/8" (41)

3-1/2" (89) 66

P330 (330-0030)

9/16" (14)

Hensley Flex Pins (Cont.)

1-19/32" (40)

3-9/16" (90)

1/2" (13)

P400HD (400-1250)

P330STP (330-0270) [Solid Rubber]

4-5/16" (110)

Hensley

1-29/32" (48)

13/16" (21)

P370 (370-0020)

1-29/32" (48)

4-1/4" (108)

P136 (330-0040) [Adapter Fastener]

5/8" (16) 67

Hensley Flex Pins (Cont.)

1-29/32" (48)

4-5/16" (110)

Hensley

P370FL (370-0150)

P475 (475-0050)

P475HD (475-0360) 68

13/16" (21)

Hensley Flex Pins (Cont.)

2-3/32" (53)

4-19/32" (117)

13/16" (21)

P410 (410-0020)

2-1/8" (54)

Hensley

5-3/16" (132)

7/8" (22)

P450 (450-0040)

2-3/16" (56)

5-3/8" (137)

11/16" (17)

P600 (600-0040) 69

Hensley Flex Pins (Cont.)

2-7/16" (62)

5-25/32" (147)

1-3/16" (30)

Hensley

P500 (500-0020)

2-7/16" (62)

5-13/16" (148) 70

P500FL (500-0150)

1-3/16" (30)

Hensley Flex Pins (Cont.)

2-3/16" (56)

6" (152)

11/16" (17)

P600HD (600-0250)

Hensley

2-13/16" (71)

6-5/16" (160)

P236 (400-0280) [Adapter Fastener]

11/16" (17)

71

Hensley Keeper Pins

K290S (290-0160)

Hensley

1-3/8" (35)

3-3/4" (95)

9/16" (14)

K330S (330-0230)

1-21/32" (42)

4-3/8" (111) 72

K370S (370-0160)

13/16" (21)

Hensley Keeper Pins (Cont.)

1-27/32" (47)

4-9/16" (116)

27/32" (21)

K410S (410-0430)

1-29/32" (48)

7/8" (22)

Hensley

5-7/32" (133)

K450S (450-0630)

2-1/32" (52)

5-15/16" (151)

K500 (500-0140) [Keeper Pin, Steel]

1-5/32" (29) 73

Hensley Keeper Pins (Cont.) 2-1/8" (54)

5-15/16" (151)

K500R (500-0120) [Keeper Pin w/Rubber]

Pins with Snap Rings

Hensley

P295 (295-0020)

P335 (385-0020)

P385 (335-0020)

74

P435 (435-0020)

1-5/32" (29)

Hensley Ratchet Spool & Wedge

1-7/32" (31)

27/32" (21)

4-19/32" (117)

R410W (410-0610)

13/16" (21)

1" (25) 19/32" (15)

4-11/16" (119)

R410SP (410-0600)

1-1/16" (27)

Hensley

25/32" (20)

9/16" (14)

5-3/8" (137)

R450SP (450-0570)

1-9/32" (33) 13/16" (21)

5-23/32" (145)

R450/600W (450-0580)

75

Installation of Ratchet Spool & Wedge

1

Flush Here

Insert Spool. With tooth on adapter, position the spool in pin hole. (Spool should be flush at both top and bottom of tooth, as shown).

Nose INSTALL

Tooth

Top

Spool

Bottom

Flush Here

Install This part should protrude from top TOP

Nose

INSTALL

Hensley

Top

INSTALL

Install Wedge. Insert the wedge into top of pin hole in direction of arrow. Install with a soft-faced hammer. (Note: When you begin installation, be sure the word "TOP" on the wedge is protruding from the top).

Tooth

Wedge

WEDGE

2

Bottom

3 TOP

76

INSTALL

Nose INSTALL

Tooth

1" or Less

WEDGE

Complete Installation. Continue to install until wedge is tight. It is common for the tip of the wedge to protrude slightly (1" or less) on newer noses. The wedge should install flush on older worn noses.

Removal of Ratchet Spool & Wedge

1

Clean Pin Hole. Clean away material on bottom of pin hole to expose small circular hole.

For easy removal, the bucket should be positioned this way

Clean this area to expose hole

Fig. A

Bottom View

2

Top

Insert Bolt. Insert common 5/16"x4-1/2" hex head bolt into hole in the bottom (see Fig. A). Hammer bolt in between the spool & wedge to separate serrated edges. (Note: bolt diameter of 5/16" is crucial for disengaging serrated edges of spool and wedge.)

WEDGE

TOP

INSTALL

INSTALL

Nose

Tooth

Bottom 5/16"x4-1/2" Hex Head Bolt

Wedge

Nose

INSTALL

Tooth

Top

INSTALL

Remove Wedge. With bolt hammered in as far as it will go, hold a removal tool to the bottom of the wedge, and hammer from the bottom until the wedge is removed.

WEDGE

TOP

Hensley

3

Bottom

77

Hensley Ripper Shank Pins for Box Rippers

1-3/8" (35)

1/2" (13)

15/16" (24)

3-7/8" (98)

P922 (501-0140)

Hensley

1-1/4" (32)

1/2" (13) 4-12" (114)

4PC (14-0360)

1-1/2" (38)

1/2" (13)

78

1" (25)

4-5/8" (117)

P926 (162-0070)

Hensley Ripper Shank Pins for Box Rippers (Cont.) 1/2" (13)

1-1/2" (38)

2" (51)

5-3/8" (137)

P933 (501-0120)

1-3/8" (35)

15/16" (24)

Hensley

1/2" (13) 5-5/8" (143)

P944 (501-0100)

1-1/4" (32)

1/2" (13) 6-1/2" (165)

6PC (14-0070)

79

Hensley Ripper Shank Pins for Box Rippers (Cont.)

P977 (501-0130)*

Hensley

1-7/16" (37)

5-1/2" (140)

B250P (503-0060)

B350P (503-0080)*

80

*Not shown actual size.

Hensley Ripper Shank Pins for Moldboard Rippers 1-1/4" (32) Dia.

8PC (14-0350)

8" (203) 9" (229)

Hensley 81

Hensley Roll Pins

1000P (54-0720)

3/8" (10)

2" (51)

P156 (156-0040)

P100 (54-1557)

1/2" (13)

2-1/2" (64)

Hensley

301P (14-0090)

1/2" (13)

3" (76)

P160 (160-0040)

1/2" (13)

3-1/2" (89)

P4000H (54-1825) [Double Roll Pin]

5/8" (16)

3-3/4" (95)

5000P (54-0890) 82

Hensley Roll Pins (Cont.) 5/8" (16)

3-3/4" (95)

P5000H (54-3601) [Double Roll Pin]

5/8" (16)

4" (102)

5001P (54-0900)

P295SL (295-0120) [Slotted Pin]

Hensley

P335SL (335-0120) [Slotted Pin]

P385SL (385-0110) [Slotted Pin]

P435SL (435-0110) [Slotted Pin] 83

Hensley

Hensley

Spool & Wedge Assembly

475WSB (475-0330) [Steel Wedge, Left] 475SPA (475-0320) [Steel Spool, Right]

Wedge Keys 4-9/16" (116)

9/16" (14)

1-9/16" (40)

W330 (330-0170) 84

11/32" (9)

Hensley Wedge Keys (Cont.)

11/16" (17)

2-1/8" (54)

9/16" (14)

2-3/16" (56)

K129C (400-0150) [Adapter Fastener]

K133-2 (400-0220) [Adapter Fastener]

7-11/16" (195)

9-3/32" (231)

Hensley 85

Hensley Wedge Keys (Cont.) K209 (400-0080) [Adapter Fastener]

K292/K233 (400-0070) [Adapter Fastener]

1/2" (13)

5/8" (16)

1-3/4" (44)

1-3/4" (44)

Hensley

6-5/8" (168)

86

6-11/16" (170)

Hensley Wedge Keys (Cont.)

K119 (300-0060) [Adapter Fastener]

K218 (475-0100) [Adapter Fastener]

Hensley 87

Hensley Wedge Keys (Cont.)

WP45W (26-4900)* [Adapter Fastener]

Hensley

K158 (475-0090) [Adapter Fastener]

88

*Not shown actual size.

Hensley Slag Pins / 2-Piece Spool

Wedge P400SBS (350-0062) [Standard]

P400SBOS (350-0063) [Oversize]

17/32" (13)

19/32" (15)

P400SA (350-0061)

17/32" (13)

17/32" (13)

4-5/16" (110)

3-15/16" (100)

21/32" (17)

4-11/16" (119)

Hensley

31/32" (25)

89

Hensley Slag Pins / 2-Piece (Cont.) 410SP (410-0130)

410W (410-0140)

5/8" (16)

25/32" (20)

29/32" (23) 1-9/32" (33)

Hensley

4-19/32" (117)

90

5-3/4" (146)

Hensley Slag Pins / 2-Piece (Cont.) P450SBOS (450-0250)

P450SBS (450-0240)

P450SA (450-0230) 1-1/4" (32)

7-5/32" (182)

7-5/32" (182)

4-31/32" (126)

Hensley

31/32" (25)

1-1/16" (27)

1" (25)

91

Hensley Slag Pins / 2-Piece (Cont.) P600SB (600-0052) [Wedge]

P600SA (600-0051) [Spool]

21/32" (17)

29/32" (23)

1-1/2" (38)

6-3/8" (162)

Hensley

5-5/8" (143)

92

Hensley Slag Pins / 2-Piece (Cont.)

Hensley

P475S (475-0060) [Slag Pin Assembly] P475SB (475-0062) [Slag Pin, Front Portion, Left] P475SA (475-0061) [Slag Pin, Back Portion, Right] P475/600SB1 (475-0063) [Slag Pin, Front Portion/ Oversize]

93

Hensley Vertical Shroud Pins

3/4" (19) Dia.

3-5/16" (84)

VS272P (500-0240)

15/16" (24) 3/4" (19) Dia.

3/4" (19)

1-3/4" (44)

2-3/8" (60)

P447 (46-0940)

Hensley

447AR (46-0950)

EMP-003 (46-0840)

EMI-004 (46-0850) [Rubber Plug]

94

Hensley Plow Bolts Dimensions

Plow Bolt Assemblies* w/Hex Nut

w/Hex Cone Nut

Stock No.

75-1090 75-1100 75-1110 75-1120 75-1130 75-1140 75-1200 75-1210 75-1220 75-1230 75-1240 75-1250 75-1260 75-1270 75-1300 75-1310 75-1320 75-1330 75-1340 75-1350 75-1490 75-1400 75-1410 75-1420 75-1430 75-1440 75-1450 75-1460 75-1500 75-1510 75-1520 75-1530 75-1540 75-1550

........... ........... ........... ........... ........... ........... ........... ........... ........... ........... ........... ........... ........... ........... ........... ........... ........... ........... ........... ........... ........... AC10-300 AC10-314 AC10-312 AC10-334 AC10-400 AC10-412 AC10-500 AC114-400 AC114-414 AC114-412 AC114-500 AC114-512 ...........

....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... ....... 75-2400 75-2410 75-2420 75-2430 75-2440 75-2450 75-2460 75-2500 75-2510 75-2520 75-2530 75-2540 .......

Diameter w/Threads per Inch 5/8" 11 5/8" 11 5/8" 11 5/8" 11 5/8" 11 5/8" 11 3/4" 10 3/4" 10 3/4" 10 3/4" 10 3/4" 10 3/4" 10 3/4" 10 3/4" 10 7/8" 9 7/8" 9 7/8" 9 7/8" 9 7/8" 9 7/8" 9 1" 8 1" 8 1" 8 1" 8 1" 8 1" 8 1" 8 1" 8 1-1/4" 7 1-1/4" 7 1-1/4" 7 1-1/4" 7 1-1/4" 7 1-1/4" 7

Bolt Length 2" 2-1/4" 2-1/2" 2-3/4" 3" 3-1/2" 2-1/2" 2-3/4" 3" 3-1/4" 3-1/2" 3-3/4" 4" 4-1/2" 3" 3-1/4" 3-1/2" 3-3/4" 4" 4-1/2" 2-1/2" 3" 3-1/4" 3-1/2" 3-3/4" 4" 4-1/2" 5" 4" 4-1/4" 4-1/2" 5" 5-1/2" 7"

B

A (Dia.)

Hex Nut Hensley

A58-200 A58-214 A58-212 A58-234 A58-300 A58-312 A34-212 A34-234 A34-300 A34-314 A34-312 A34-334 A34-400 A34-412 A78-300 A78-314 A78-312 A78-334 A78-400 A78-412 ** A10-212J A10-300 A10-314 A10-312 A10-334 A10-400 A10-412 A10-500 A114-400 A114-414 A114-412 A114-500 A114-512 A114-700

Stock No.

Hex Cone Nut

*Plow Bolt Asembly consists of Plow Bolt with Nut. **Comes w/Hex Jam Nut.

Retainers

Hex Nuts Part No. N10J N58 N34 N78 N10 N114 N10C N114C

Stock No.

Inside Dia.

Description

Part No.

Stock No.

Inside Dia.

75-0730 75-0800 75-0810 75-0820 75-0830 75-0840 75-0930 75-0940

1" 5/8" 3/4" 7/8" 1" 1-1/4" 1" 1-1/4"

Hex Jam Nut Hex Nut " " " " Hex Cone Nut "

LW58 LW34 LW78 LW10 LW114

75-0600 75-0610 75-0620 75-0630 75-0640

5/8" 3/4" 7/8" 1" 1-1/4"

95

96

Hensley

Komatsu Style KmaxTM Pins

KP15 (5015-0020) Standard Duty KP15C (5015-0200) Heavy Duty

KP20 (5020-0020) Standard Duty KP20C (5020-0200) Heavy Duty

Komatsu Style

KP25 (5025-0020) Standard Duty KP25C (5025-0200) Heavy Duty

KP30 (5030-0020) Standard Duty KP30C (5030-0200) Heavy Duty 97

Komatsu Style KmaxTM Pins (Cont.)

KP50 (5050-0020) Standard Duty KP50C (5050-0200) Heavy Duty

Komatsu Style

KP70 (5070-0020) Standard Duty KP70C (5070-0200) Heavy Duty

KP85 (5085-0020) Standard Duty KP85C (5085-0200) Heavy Duty

98

Komatsu Style Pins with Snap Rings 31/32" (25) Dia.

3-5/8" (92)

092-44-02488-P (52-0060)

31/32" (25) Dia.

3-25/32" (96)

092-44-02496-P (52-0320)

31/32" (25) Dia.

4-5/8" (117)

175-78-21740-P (52-0070)

Komatsu Style

195-78-71360-P (52-0690)

1-1/16" (27) Dia.

5-1/32" (128)

426-847-1130P (52-0330)

87

99

Komatsu Style Pins with Snap Rings (Cont.)

1-5/32" (29) Dia.

5-3/8" (137)

092-44-03036-P (52-0370)

1-3/16" (30) Dia.

6" (152)

198-78-21340-PL (52-0470)

Komatsu Style

1-9/16" (40) Dia.

6-1/2" (165)

21N-72-14330-P (52-0350)

1-15/32" (37) Dia.

6-5/8" (168) 100

88

427-70-13790-P (52-0440)

Miscellaneous Flex Pin

28270P (32-0060) [Ateco Style Flex Pin]

Roll Pins

20853P (38-0020) [Fiat-Allis Style Roll Pin]

P555 (27-0020) [Ford Style Roll Pin]

Miscellaneous

R17206P (46-0720) [Preco Style Roll Pin]

R3722P (46-0710) [Preco Style Roll Pin]

89

101

Miscellaneous Scarifier Shank Wedge Pins

Miscellaneous

46475AHX (48-0140) [Galion/Dresser Style Scarifier Shank Wedge Pin]

102

61386W (46-0700) [Mitsubishi Style Scarifier Shank Wedge Pin]

90

Miscellaneous Wedge and Machined Insert

700563P (40-0070) [Bucyrus-Erie Style Wedge]

700563MI (46-0240) [Bucyrus-Erie Style Machined Insert]

Miscellaneous

91

103

104

92

Miscellaneous

Page Style

Tooth

J-Bolt with Nut 3-7/16" (87)

J-Bolt 5/8" (16) Dia.

7/8" (22)

7/8" (22) Dia.

1-7/8" (48)

58JP (18-0160)

4" (102)

3/4" (19) Dia.

1-1/8" (29)

1-1/16" (27) Dia.

1-1/2" (38)

34JP (18-0170)

4-7/8" (124)

7/8" (22) Dia.

1-5/16" (33)

1-3/8" (35) Dia.

2-1/16" (52)

78JP (18-0180)

5-1/4" (133)

Page Style

1" (25) Dia.

1-9/16" (40) Dia.

1-1/4" (32)

2" (51)

1JP (18-0120)

93

105

Page Style J-Bolt with Nut (Cont.) 6-5/16" (160)

7/8" (22) Dia.

1-7/16" (37)

1-3/8" (35) Dia.

3-1/4" (83)

78JP2 (18-0190)

7" (178)

2-3/32" (53)

1-1/8" (29) Dia.

1-5/8" (41) Dia.

3-1/4" (83)

118JP (18-0130)

7-1/16" (179) 1-1/4" (32) Dia.

Page Style

2-1/16" (52)

1-5/8" (41) 106

94

3" (76)

114JP (18-0140)

Pin Removal Tools

PRT156 (156-0240)* [Use with 156 Parabolic® Series]

PRT160 (160-0100)* [Use with 160 & 220 Parabolic® Series]

PRT290 (90-0090)* [Use with 290 and 330 Parabolic® Series]

PRT370 (90-0100)* [Use with 370, 410, & 450 Parabolic® Series]

*Not shown actual size.

Pin Removal Tools

PRT500 (90-0110)* [Use with 500 and 550 Parabolic® Series]

107

Pin Removal Tools

P295SLRT (295-0130)* [Use with Hensley 295 Series]

P335SLRT (335-0130)* [Use with Hensley 335 Series]

P385SLRT (385-0120)* [Use with Hensley 385 Series]

Pin Removal Tools

Pin Punches

108

516PU (156-0070)* [Use with Hensley 156 Parabolic® Series]

716PU (160-0060)* [Use with Hensley 160 & 220 Parabolic® Series]

*Not shown actual size.

Index Symbols 092-44-02488-P .......... 99 092-44-02496-P .......... 99 092-44-03036-P ........ 100 1000P .......................... 82 112195P ...................... 21 112196W ..................... 21 114JP ........................ 106 114PBB ........................ 47 118JP ........................ 106 11P ................................ 7 11R ................................ 7 12P ................................ 7 12R ................................ 7 13/14P ........................... 8 13/14R ........................... 8 151R .............................. 8 15P ................................ 8 161R .............................. 9 16P ................................ 9 175-78-21740-P .......... 99 18-20MLKR .................. 23 18-20MPNP ................. 23 18P .............................. 44 195-78-71360-P .......... 99 198-78-21340P-L ....... 100 1D3537HX .................... 19 1JP ............................ 105 1PBB ........................... 47 1U0739P ...................... 11 20853P ...................... 101 20SPS ......................... 33 20W1W ........................ 33 21N-72-14330-P ........ 100 21/22P ......................... 43 225PB .......................... 65 22RBGB ....................... 31 22RPGP ....................... 31 23PA ............................ 43 23PB ............................ 43 23PC ............................ 43 23PD ............................ 43 24PB ............................ 43 25RB ............................ 31 25RBS ......................... 32 25RP ............................ 31 25/26PB ....................... 44 25/26PD ....................... 44 25/30LKR ..................... 23 25/30PNP ..................... 23 28270P ...................... 101 28P .............................. 45 28PL ............................ 45 28TM ........................... 46 29-1KW ....................... 38 29-2KW ....................... 38 29-3KW ....................... 38 29-4KW ....................... 38 29SPS ......................... 34 29W1W ........................ 34 29W2W ........................ 34 2K6413P ...................... 20 300PB .......................... 65 301P ............................ 82 308P ............................ 45 31P .............................. 45 32P .............................. 46 33/35P ......................... 46 34J .............................. 49 34JP .......................... 105 35PNP ......................... 23 35PNRP ....................... 23 35RB ............................ 32 35RBS ......................... 32 35RP ............................ 32

35/40LKR ..................... 23 35/40LKRR ................... 23 36LKR .......................... 24 36P .............................. 44 36PNP ......................... 24 37/50P ......................... 44 38P .............................. 45 39RB ............................ 32 39RP ............................ 32 39RSPP ....................... 31 3G0500P ...................... 18 3G9609W ..................... 15 3G9609WHR ................ 15 3K1P ............................ 17 3K2P ............................ 17 3R5325P ...................... 20 40PNP ......................... 24 40PNRP ....................... 24 410SP .......................... 90 410W ........................... 90 418CLAC .................. 5, 63 418W2W .................. 5, 64 418WAW ................. 5, 63 426-847-1130P ............ 99 427-70-13790-P ........ 100 435CL ...................... 5, 62 435W ....................... 5, 62 447AR .......................... 94 44DLKR ........................ 24 44DPNP ....................... 25 45LKR .......................... 26 45LKRR ........................ 25 45PNP ......................... 25 45PNRP ....................... 25 46475AHX .................. 102 46LKR .......................... 26 46PNP ......................... 26 475SPA ........................ 84 475WSB ...................... 84 4EP .............................. 48 4K32P .......................... 15 4K41LK ........................ 16 4K43P .......................... 17 4K8LK .......................... 17 4PC .............................. 78 4T0001W ..................... 15 4T4707W ............... 11, 16 5000P .......................... 82 5001P .......................... 83 501P ............................ 65 50LKR .......................... 27 50LKRR ........................ 26 50PNP ......................... 27 50PNRP ....................... 26 50PNTP ........................ 40 50SLKR ........................ 40 516PU ........................ 108 55LKR .......................... 28 55LKRR ........................ 27 55PLP .......................... 42 55PNP ......................... 28 55PNRP ....................... 27 55PNTP ........................ 41 55SLKR ........................ 41 55W1W ........................ 42 56725P ........................ 21 56LKR .......................... 28 56PNP ......................... 28 58J .............................. 49 58JP .......................... 105 58SPS ......................... 36 58TT ............................ 36 58W1W ........................ 36 58W2W ........................ 35 58W3W ........................ 35 5BP .............................. 48

5BP2 ............................ 48 5J9000P ...................... 11 5K1459W ..................... 19 ‘5’ Series Hammerless Pins ..................... 60-61 601P ............................ 65 61386W ..................... 102 65LKR .......................... 29 65PNP ......................... 29 6I6608P ........................ 14 6I6609W ...................... 16 6J8811P ...................... 18 6P ............................... 50 6PC .............................. 79 6Y2443P ...................... 18 6Y2527P ...................... 13 6Y3228P ...................... 12 6Y3394P ...................... 13 6Y3909P ...................... 14 6Y8558P ...................... 14 6Y9459W ............... 11, 15 6Y9459WHR ................ 15 700563MI ................... 103 700563P .................... 103 701P ............................ 65 702P ............................ 65 70LKR .......................... 29 70PLP .......................... 39 70PNP ......................... 29 70SPS ......................... 37 70W1W ........................ 37 70W2W ........................ 39 716PU .......................... 94 78JP .......................... 105 78JP2 ........................ 106 7J9600P ...................... 18 7K9535P ...................... 20 7K9937P ...................... 20 7P ............................... 51 7T3408P ...................... 13 7T3409W ..................... 15 7T3409WHR ................. 15 8E0468P ...................... 13 8E0469W ..................... 15 8E0469WHR ................. 15 8E4708P ...................... 11 8E5559W ............... 11, 15 8E5559WHR ................. 15 8E6259W ..................... 15 8J1433P ...................... 18 8P ............................... 51 8PC .............................. 81 901P ............................ 66 9J2258 ......................... 12 9J2308P ...................... 12 9J2358P ...................... 13 9J6583P ...................... 12 9J8442P ...................... 11 9W2678P ..................... 12 9W7112P ..................... 12 9/10P ............................. 7 9/10R ............................. 7

A A10-212J ..................... 84 A10-300 ....................... 84 A10-312 ....................... 84 A10-314 ....................... 84 A10-334 ....................... 84 A10-400 ....................... 84 A10-412 ....................... 84 A10-500 ....................... 84 A114-400 ..................... 84 A114-412 ..................... 84 A114-414 ..................... 84

A114-500 ..................... 84 A114-512 ..................... 84 A114-700 ..................... 84 A34-212 ....................... 84 A34-234 ....................... 84 A34-300 ....................... 84 A34-312 ....................... 84 A34-314 ....................... 84 A34-334 ....................... 84 A34-400 ....................... 84 A34-412 ....................... 84 A478 ............................ 49 A58-200 ....................... 84 A58-212 ....................... 84 A58-214 ....................... 84 A58-234 ....................... 84 A58-300 ....................... 84 A58-312 ....................... 84 A78-300 ....................... 84 A78-312 ....................... 84 A78-314 ....................... 84 A78-334 ....................... 84 A78-400 ....................... 84 A78-412 ....................... 84 AC10-300 ..................... 84 AC10-312 ..................... 84 AC10-314 ..................... 84 AC10-334 ..................... 84 AC10-400 ..................... 84 AC10-412 ..................... 84 AC10-500 ..................... 84 AC114-400 ................... 84 AC114-412 ................... 84 AC114-414 ................... 84 AC114-500 ................... 84 AC114-512 ................... 84 Adapter Locking Systems 3, 51-53, 56, 60, 74-77 Amsco Style .............. 5-7 Ateco Style Flex Pin ..... 87

B B250P .......................... 80 B350P .......................... 80 Bolt with Nut & Washer ............................... 47 Bolts (Plow) ................ 84 Bucyrus-Erie Style Machined Insert ...... 89 Bucyrus-Erie Style Wedge ..................... 89 Bushings (See Ripper Pins & Bushings)

C C-Clamp and Wedge Adapter Fasteners ...................... 5, 62-64 Caterpillar Style ....... 11-20 Compactor Foot Pins ... 18 Cotter Keys .................. 18

D Deere, John (Style) ..... 19

E EMI-004 ....................... 94 EMP-003 ...................... 94 Esco Style .............. 23-42

F Fiat-Allis Style Roll Pin ............................... 87 Flex Pins ..... 5, 11, 43-46, 48, 65-71, 101

Ford Style Roll Pin ....... 87 Modulok Style Pins for Vertical Protectors .. 11

G

N Galion/Dresser Style N10 .............................. 84 Scarifier Shank Wedge Pin ............... 88 N10C ............................ 84 N10J ............................ 84 H N114 ............................ 84 H & L Style ............. 43-46 N114C .......................... 84 Hendrix Style ........... 47-51 N34 .............................. 84 Hensley ................... 53-95 N58 .............................. 84 Hex Cone Nuts ............. 84 N78 .............................. 84 Hex Jam Nuts .............. 84 Nuts ..... 45, 47, 84, 91, 92 Hex Nuts ...................... 84 P

I

P100 ............................ 82 P136 ........................ 5, 67 Installation of Ratchet Spool & Wedge ....... 65 P156 ............................ 82 P160 ............................ 82 J P162 ............................ 65 P236 ........................ 5, 71 J-Bolt with Nut ................... 49, 91, 92 P290 ............................ 66 John Deere Style ......... 21 P290STP ...................... 66 P295 ............................ 74 K P295RI ......................... 60 K119 ........................ 5, 87 P295SL ........................ 83 K129C ...................... 5, 85 P295SLRT .................. 108 K133-2 ..................... 5, 85 P330 ............................ 66 K158 ........................ 8, 88 P330STP ...................... 67 K209 ........................ 5, 86 P335 ............................ 74 K218 ........................ 5, 87 P335RI ......................... 60 K290S .......................... 72 P335SL ........................ 83 K292/K233 ............... 5, 86 P335SLRT .................. 108 K330S .......................... 72 P350/400 ..................... 66 K370S .......................... 72 P370 ............................ 67 K410S .......................... 73 P370FL ........................ 68 K450S .......................... 73 P385 ............................ 74 K500 ............................ 73 P385RI ......................... 60 K500R .......................... 74 P385SL ........................ 83 Keeper Pins ............ 72-74 P385SLRT .................. 108 Kmax Pins .............. 97-98 P4000H ........................ 82 Komatsu Style ...... 97-100 P400HD ........................ 67 KP15 (std. duty) .......... 97 P400SA ........................ 89 KP15C (heavy duty) .... 97 P400SBOS ................... 89 KP20 (std. duty) .......... 97 P400SBS ..................... 89 KP20C (heavy duty) .... 97 P410 ............................ 69 KP25 (std. duty) .......... 97 P435 ............................ 74 KP25C (heavy duty) .... 97 P435RI ......................... 61 KP30 (std. duty) .......... 97 P435SL ........................ 83 KP30C (heavy duty) .... 97 P447 ............................ 94 KP50 (std. duty) .......... 98 P450 ............................ 69 KP50C (heavy duty) .... 98 P450SA ........................ 91 KP70 (std. duty) .......... 98 P450SBOS ................... 91 KP70C (heavy duty) .... 98 P450SBS ..................... 91 KP85 (std. duty) .......... 98 P475 ............................ 68 KP85C (heavy duty) .... 98 P475HD ........................ 68 P475S .......................... 93 L P475SA ........................ 93 P475SB ........................ 93 Lock Washers P475/600SB1 ............... 93 (See Retainers) P485RI ......................... 61 Locking Systems (Adapter) ..... 3, 51-53, P500 ............................ 70 P5000H ........................ 83 56, 60, 74-77 LW10 ........................... 84 P500FL ........................ 70 LW114 ......................... 84 P555 .......................... 101 LW34 ........................... 84 P600 ............................ 69 LW58 ........................... 84 P600HD ........................ 71 LW78 ........................... 84 P600SA ........................ 92 P600SB ........................ 92 P922 ............................ 78 M P926 ............................ 78 Machined Insert ........... 89 P933 ............................ 79 Miscellaneous ......... 87-89 P944 ............................ 79 Mitsubishi Style Scarifier P977 ............................ 80 Shank Wedge Pin .... 88 Page Style ......... 105, 106 109

Index Pin Punches .............. 108 Pin Removal Tools ..................... 107, 108 Pin & Retainer .................... 12-16, 21 Pins with Snap Rings ........... 18, 74, 99, 100 Pins & Rubber Locks ...... 7-9, 16, 17, 23-29 Pins & Rubber Plugs ......................... 17, 30 Plow Bolts ................... 95 Plugs (See Rubber Plugs) Preco Style Roll Pins ... 87 PRT156 ...................... 107 PRT160 ...................... 107 PRT290 ...................... 107 PRT370 ...................... 107 PRT500 ...................... 107

Straight Pins ................ 20

T Tang & Key Assemblies ............. 38 TS920P ........................ 58 TS1120P ...................... 58 TS1220P ...................... 58

U U15522P ...................... 21

V Vertical Shroud Pins .... 94 VS272P ........................ 94

W

W15P ............................. 9 W330 ........................... 84 Wedge and Machined R Insert .................... 103 R17206P .................... 101 Wedge Keys ....... 3, 84-88 R2P .............................. 30 Wedge Pins ........... 50, 51 R2R ........................ 17, 30 WP45W ....................... 88 R3722P ...................... 101 R3P .............................. 30 X R410SP ........................ 75 XS04P .......................... 53 R410W ......................... 75 XS05P .......................... 53 R450SP ........................ 75 XS10P .......................... 53 R450/600W .................. 75 XS15P .......................... 53 R4P .............................. 30 XS20P .......................... 54 R4R .............................. 30 XS25P .......................... 54 R5P .............................. 30 XS30P .......................... 54 R6P .............................. 30 XS40P .......................... 55 Ratchet Spool & Wedge XS50P .......................... 55 .......................... 75-77 XS70P .......................... 55 Removal of Ratchet XS85P .......................... 56 Spool & Wedge ....... 76 XS115P (std. duty) ...... 56 Retainers ...... 9-14, 19, 84 XS115PC (heavy duty) 56 Ripper Pins XS145P (std. duty) ...... 56 ........ 20, 31, 32, 67-69 XS115PC (heavy duty) 56 Ripper Pins & Bushings XS115PD (special) ....... 56 ......................... 31, 32 XS250P ........................ 57 Ripper Shank Pins ....... 20 XS340P (std. duty) ...... 57 Ripper Shank Pins XS340PC (heavy duty) 57 for Box Rippers ... 78-80 XS390P ........................ 59 Ripper Shank Pins for XS640P ........................ 59 Moldboard Rippers ... 81 XS800P ........................ 59 Ripper Tooth Pins ........... 9 XSC12P ........................ 58 Roll Pins .. 21, 82, 83, 101 XS Intermediate Adapter Rubber Bushings .... 29, 30 Pins .......................... 59 Rubber Locks ............ 5-7, XS Pins ................... 53-57 14, 15, 21-27 XS Rotary Pins ............. 58 Rubber Plugs ... 15, 28, 83 RX1900P ...................... 46

S Scarifier Shank Wedge Pins ....................... 102 Scarifier Shank Wedges ............................... 17 Slag Pins / 2-Piece .............. 39-41, 89-93 Slag Pins / 3-Piece ...... 42 Slotted Pins ................. 72 Snap Rings (Pins with) ............. 16, 63, 85, 86 SP55P ......................... 42 Spool & Wedge Assemblies ........ 33-37, 64-66, 84 Steel Bushings ............. 30 Straight Pin with Cotter ...................... 20 110

0

1

2

3

4

5

6

7

8

9

10

Your Authorized GH Hensley Dealer:

Hensley Industries, Inc. An ISO 9001:2000 Company 2108 Joe Field Road Dallas, Texas 75229, U.S.A. Customer Service: Tel. (888) 406-6262; Fax (888) 241-3274 www.hensleyind.com

Copyright © 2006 Hensley Industries, Inc. This publication is protected under the copyright laws of the United States. Unauthorized duplication or distribution is prohibited.