Physique Training Template How To RP

Template How-To Thank you for purchasing the RP Female Physique Template! In order to give you the best possible experience, we’ve included in this document detailed instructions on how to run the template. In the FAQ document which you’ve also received, we address numerous possible questions that you might have about the particulars of the process. Our best advice to you is to read this whole document first (and watch this how-to video), and then move on to the FAQ. Only upon reading both of these documents do we recommend you start using the template for your training.

Step by Step How-To Instructions Opening the template and making sure all sheets are included. When you receive your template, it will come in the form of an Excel file and several other Word files. The actual program is in the Excel file and covers 4 sheets. If you use another program to view spreadsheets (Google Docs, any Apple products, etc…) we unfortunately cannot guarantee that the formulas and drop-down menus will function properly, so we highly recommend using Microsoft Excel. When you open your excel file, you should see 4 sheets: -

Mesocycle 1: Basic Hypertrophy Mesocycle 2: Elevated Volume Mesocycle 3: Metabolite Training Mesocycle 4: Resensitization

If any of those sheets are missing (highly unlikely), please contact us and we’ll send you a fixed document. Understanding the Training Phases Each sheet is a mesocycle of training, of which the first three are 5 weeks long each and the last is 4 weeks long. That’s right, it’s 19 weeks of training in one product. And the best news, you can re-use the whole sequence of mesocycles (or any one of them individually) for up to several years of training.

So what do the different mesocycles entail and why are they ordered in the way they are? Well, the first mesocycle we recommend you do is the “Basic Hypertrophy” mesocycle. Just like the others, it allows you to choose your exercises based on your needs and preferences, type in an estimate of how strong you are, and it generates a 5 week training program which you rate as you go so that the program changes to your needs the whole time. It’s the first mesocycle because it has enough volume (amount of training) to get you to grow muscle effectively, but it starts out nice and easy so that you can get the most while doing the least you have to. It gets harder as you go, and by the end it will be a real challenge. But when you’ve finished it, you’ll be that much stronger and that much better at doing sets and sets of each exercise. You’ll need to increase the stimulus in order to continue putting on muscle or sparing it from loss during a fat loss diet, and that’s just where mesocycle 2 comes in. After the first meso is done, you’ll move onto the second one “Elevated Volume.” Now that you’re much more used to high numbers of sets, this mesocycle starts with more sets than the first, and you’ll be able to kick it into high gear sooner. Just surviving the training will be a fun challenge, so you better be ready to work! After the second mesocycle is complete and you’ve done 10 weeks of training, your body will be quite resistant to muscle growth and we’ll need to pull out all the stops for you to keep progressing. In the third mesocycle (Metabolite Training), your reps per set will go up considerably as the weights will be intentionally lighter. In addition, the rest time will shorten to just enough time for you to barely catch your breath. This kind of training raises your level of lactate and other muscle metabolic byproducts; it’s these byproducts that play a big role in stimulating your muscle cells to grow. How do you know the metabolites are summing up in your muscles during the training? Because of the high reps and short rests, you’ll literally feel a “burn” in your muscles like you might not have felt before. This is exactly what we want, so if you’re feeling it, you’re on the right track! When you’ve completed the metabolite mesocycle, your physique will have changed for the better. But now, because we threw the kitchen sink at your muscles, your body will be very resistant to any further growth in the short term. So how do we get you growing again? You do the fourth mesocycle: “resensitization.” The process of getting your muscles ready for growth again requires lower volumes (set numbers and rep numbers) of training, so that’s just what this mesocycle will program for you. The training will be heavier than you’re used to (heavy weight keeps your gains much better during periods of lower volume), but it will be fewer sets and way fewer reps. You’ll probably not get any big pumps or see any big changes in your physique during this time, but that’s ok because at a deep physiological level, your body is forgetting the high volume training of the last 15 weeks. The next time you train with high volumes again (by circling back around to meso 1 when you’ve completed the fourth meso), your body will be ripe and ready to respond with steady growth! And for those of you who love to train with tons of sets and reps, no worries about feeling bored… this phase is only 4 weeks long total. Now that we have a general outline of the process, let’s zoom in to see how each mesocycle sheet works and how you can program it to work best for your needs. Steps 1 and 2: Entering your preferred exercises. Before we get into the details, please keep this in mind. If you EVER get lost in all of this just look at the mesocycle workout sheet itself and follow the numbers (1-6) and big arrows for the instructions in each

step of the process, all color-coded for your convenience. Please watch this video before you read the rest! Also, before you enter ANYTHING into any cell in the template, save a spare copy of the program somewhere so that if you mess up the program by typing into the wrong cell or deleting parts of the program, you always have a fresh program to go back to and “save as” a new program for future use. In the “1.)” column, you’ll see a bunch of empty green cells, and just to their left, the category to which they belong (such as “quads” or “hamstrings”). Those are all of the exercises that will compose each of your workout days for the next five weeks. To choose an exercise, just scroll through the drop-down menus of each cell and pick a movement! A couple of quick tips: -

-

-

Pick the exercises that you have access to at your gym and/or that you’ve done before or are the most comfortable doing. For better stimulus and fatigue management, we recommend picking two different movements for each of the options for exercises when two cells are available, such as when “quads” is two exercise in a row, however, you can choose to repeat the movement if you feel confident in your ability to benefit and recover from this approach Only select movements you’re competent in. This is not a novice program and you must know the basic lifts well. Consider consulting a local powerlifting coach to help you with technique if you’re struggling. To help you remember the proper techniques for the exercises, every time you pick an exercise, its how-to video, will pop up in a clickable link in the light blue “2.)” column right next to the exercise name column. These videos are a great reference point for you, and they star RP’s very own Dr. Melissa Davis (and sometimes Dr. James Hoffmann on the odd exercise here and there)

Step 3: Entering your estimated 10RM values. Once you’ve picked your exercises in column “1.),” you’re ready to pick the estimated 10RM values in the 10RM column “3.)” colored purple. 10RM means “10 repetition max,” the most weight you can do for one set of 10 on each exercise. Does this mean you MUST actually go to the gym for the whole week before this program and find your 10RM values by testing them? Absolutely not. If you have actual recent 10RM values from your older training, great, use those. If you don’t, you don’t have to worry at all. This program is designed to work well in a wide range of weights that are estimates of your 10RM. Your only job when picking them is to not be a complete knucklehead during the process. For example, don’t pick for a 10RM something you’re likely going to struggle getting for 6 reps on a good day. These don’t have to be “gun to your head” 10RMs, just realistic ones. On the other hand, don’t get super conservative and put down weights you can rep out for 15 on any given day. Just give your best guess to a realistic 10RM, keep your fear and ego out of the decision as much as you can, and go from there. After the first week, if your first couple of sets on an exercise are 6 or fewer reps on mesocycles 1-2, 10 reps or less on mesocycle 3, and less than 3 reps on mesocycle 4, you need to bump the weight down in that initial 10RM column. If they are over 12 reps on mesocycle 4, over 20 reps on mesocycles 1 and 2 or over 30 reps on mesocycle 3, you need to bump that weight up. All else should work just fine. If your last couple of sets in any exercise (when you are tired from the first sets) dip below 6 reps, no worries, so long as the first couple were over 6 reps.

Step 4: Following the workouts. Once you’ve completed the 10RM column and filled in all those values, you can switch over to the “4.)” column where the first week of your newly generated workout awaits! Your whole workout will be generated for you, including weights, sets, and rep recommendations. First things first when you’re training; the warmup. You’ve lifted a bunch before, so we’re not going to tell you how to warm up. Warm up how you usually do until you’re ready to begin the working sets, and feel free to warm up for the different exercises to your liking within each workout. When you’re doing each working set, you’ll notice that the “rep goal” column is rather strange. It says something like “3/fail, 2/fail or 1/fail.” What does the /fail (read: “from fail”) system mean? It’s VERY SIMPLE. If the rep goal says “3/fail,” then you are to stop the set when you think you’ve got about 3 reps left in the tank. When it says “2/fail,” stop when you only have two reps or so left and when it says “1/fail,” stop the set when you only have one rep left before you give out. That’s it, it’s as simple as that. What this means is that you’ll be pushing it pretty easy on the first weeks, and ramping up the relative intensity as the weeks progress to week 4, which will of course be pure hell. This system is designed to execute the function of progressive overload to give you maximum results, and it will work well ONLY IF YOU’RE HONEST WITH YOURSELF. If you push all the work sets to near failure in the first weeks, you’re going to overreach and hit the proverbial wall long before the mesocycle is over (getting subpar results). If you take it too easy, then the workouts will not be sufficiently challenging in order to deliver the best results. A very quick note; if you have to break your technique to get more reps, YOU’VE ALREADY FAILED. When we write “3/fail,” we ALWAYS mean “3 reps away from failure WITH GOOD TECHNIQUE.” Never let your technique slide for more reps. Sorry for yelling.  Lastly, if you’re confused about the from-fail system and are just not sure if you’re guessing right, don’t be frustrated. Always seek to learn your body better, but in the meantime, just guess your best. Great results will come even if you’re not 100% on target with every guess. Remember, you’re NEVER training to failure in any week of this program. Step 5: Rating the workouts. After each workout, write down the reps you actually got in the “rep results” column. You’re almost done with your workout-tracking for the day. You just need to do one more thing; rate your effort. Most of the exercises have drop down menus (in blue, just to the right of the “rep results” column for each workout) for almost every single training day, save for deload and the first couple and last couple days of each mesocycle. Rate the exercises that have blue cells in their rows for that day by selecting either -1, 0 , or 1 from the drop-down menu in every blue cell. The purpose of the ratings is very important. How you rate your exercises plugs into a feedback system that programs the future number of sets for that muscle group. The algorithm can get quite complicated, but the usual process is to alter the number of sets you’ll be doing in the next half-week of training. Thus, if your training was super tough early in the week, your training later in the week will be made easier so that you can recover better. If your training was smooth, no changes will be made, and if

you training was too easy, the next half week will get harder. This function extends through most of the mesocycle, so please stay diligent with the ratings to get the most out of the plan. The exact rating descriptions are featured at the top of each mesocycle sheet in the blue column labeled “5.)” sheet, so please read them carefully and rate accordingly. Note: while the rating system for mesos 1-3 is the same, meso 4’s rating system is a bit different, so please pay close attention when reading its instructions. These ratings ONLY WORK if you’re HONEST about your experience. No tough girl stuff, but don’t take it too easy either. If you blew through all the reps and didn’t feel a twinge sore from last time, fantastic, rate it a 1 and you’ll have more work in your future. But if you had a tough workout and were still sore from last time but still rated it a 1, you’re setting up a tidal wave of volume that will crush down on your already-beat-down-self in mere days. That can lead to performance loss, unintentional overreaching, bad results, and possibly even injury. So do your best with the ratings and the workout will adjust itself for you, no ego or fear of overtraining required. Step 6: Deloading. Assuming you’ve survived week 4 of the accumulation phase, the 5th week of the plan (4th only in the last mesocycle) is a deload. You can see this week once you’ve scrolled all the way to the right, and it’s colored green for easy visibility. The purpose of this week is to preserve your muscle gains while dropping your fatigue off and allowing you to have another productive training cycle ahead. You’ll notice that the week’s rep goal is usually to do “1/2 reps of week 1,” so that’s exactly what you should do! If the reps of week 1 are odd numbers, just err on the side of lower. So for example, if you did 7,5,4 reps on week 1, doing 3,2,2 reps on the deload week is the recommended approach. Not only are the reps lower, but the weights will be lower too, especially in the second half of the deload week. This is to promote recovery and maintain muscle, and is entirely planned (your template is not broken because the weights are so puny). There is no rating scale for those workouts, in part because they will be super easy. If you choose to skip the deload week or make it harder, that is unlikely to be a good decision for your medium and long term training. Final Step: Repeating the program or moving on? After the deload week, you can move on to the next sheet in the rotation. Make sure to choose different exercises (highly recommended to not just do the same ones) and continue for another 5 weeks of training. After you’ve done the first three mesos, do the fourth and then circle back around to the first, and so on, choosing new exercises every time. You CAN do the same exercises that you did TWO mesocycles ago (such as mesocycle 1 and 3), but shouldn’t do the same exercises in two consecutive mesocycles, such as mesos 2 and 3.