PERI

July 20, 2017 | Author: Victor Boateng | Category: Scaffolding, Mechanical Engineering, Building, Engineering, Industries
Share Embed Donate


Short Description

Scaffold...

Description

DOMINO The lightweight Panel Formwork for forming without a crane

Edition 01/2010 PERI GmbH Formwork Scaffolding Engineering P.O. Box 1264 89259 Weissenhorn Germany Tel +49 (0)73 09.9 50-0 Fax+49 (0)73 09.9 51-0 [email protected] www.peri.com

Important Notes: Without exception, all current safety regulations must be observed in those countries where our products are used. The illustrations in this brochure are photographs of real site situations. Safety or formwork anchor details are therefore not to be taken as a definitive guide to the way the equipment is to be used. Safety instructions and load specifications are to be strictly observed at all times. Separate structural calculations are required for any deviations from the standard design data. The information contained herein is subject to technical changes in the interests of progress. Errors and typographical mistakes reserved.

Content

2

DOMINO The lightweight panel formwork for forming without a crane

4

Corners, T-junctions, Fillers

6

Accessories for quick and simple forming

8

Components

24

PERI International

1

DOMINO The lightweight panel formwork for forming without a crane

DOMINO is the lightweight panelized formwork system with elements made of steel or aluminium for smaller residential and civil engineering projects. Only four panel widths This means any ground plan can be formed. The 0.75 m element is also available as a multi-purpose panel.

250 x 100 in steel and aluminium

250 x 75 in steel and aluminium

250 x 50 in steel

250 x 25 in steel

DOMINO DRS Alignment Coupler It fastens, aligns and tightens in a single operation.

Whether on standard panel connections ...

2

... or with filler timbers up to 120 mm wide.

DOMINO DKS Wedge Coupler For the standard panel joint at foundations.

DOMINO panels are extremely light yet withstand a high load. The 250 x 100 panel in aluminium weighs only 59 kg.

The DKS Wedge Coupler for standard panel joints with normal requirements.

High allowable fresh concrete pressure For concreting heights up to 2.50 m, the DOMINO has been designed for the full hydrostatic pressure according to DIN 18202, table 3, line 7 (steel elements) and line 6 (aluminium panels). For greater heights a fresh concrete pressure of 60 kN/m2 (steel panels) is allowable in compliance with DIN 18202, table 3, line 6. This allows quick concreting and ensures very flat concrete surfaces. At greater heights (extended forms) the aluminium panels must only be used as extension panels at the top. – Only 2 ties needed for concreting heights up to 2.50 m. This means 1.25 m² of wall area per tie. – The DOMINO DG 85 scaffold bracket for an 850 mm wide concreting scaffold. The maximum bracket spacing is an economical 2.00 m under an imposed load of 150 kg/m².

DOMINO form with push-pull props and concreting platform ready for use.

3

DOMINO standard application Corners, T-junctions, Fillers

The 50 panel and the DAW external corner angle form the external corner. Together with the DWD 5 compensator, wall thicknesses from 150 to 350 mm in 50 mm increments are possible.

DWD 5

Basic rules for corners: Outside: Panel D 50 Corner Angle DAW Inside: Articulated Corner DGE Adjusted to wall thickness with DWD compensator or timber.

Filler timber 1 cm

DAR 80

2 DWD 5

DAR 80

35

30

DWD 5

DAR 80

DWD 5

External Corner DAW

24

20

Corners

2 DWD 5

Compensation Waler DAR 80

D 50

25

D 50

25

DGE

Two DRS alignment couplers are needed at the internal corner and the standard panel joint.

4

Four DOMINO DRS alignment couplers are needed on each side of the external corner.

T-Junctions

20

The 75 panel and the articulated corner form the T-junction. Together with the DWD 5 compensator, wall thicknesses from 150 to 350 mm in 50 mm increments are possible.

DWD 5

Basic rules for T-junctions: Outside: Panel D 75 Inside: Articulated Corner DGE Adjusted to wall thickness with DWD compensator or timber.

24

Filler timber 1 cm

DGE

25

DGE

30

D 75

Length adjustments DWD 5 35

DWD 5

Up to 300 mm with filler support DPA and compensation waler DAR 80

Up to 120 mm with DOMINO DRS alignment coupler and filler timber.

5

DOMINO Accessories for quick and simple forming

All of the cross struts of the DOMINO panelss have connecting holes for accessories. These details allow to shutter fast the easy way.

Push-Pull Prop Connector DRA For connecting push-pull props and kicker braces to horizontal and vertical struts.

The coupler with captive wedge makes erection very easy.

DOMINO Stacking Device makes handling with the crane and stacking on site easier. The stacks can also be moved with a fork-lift truck. 8 panels of a particular size can be stacked quickly and safely.

DOMINO Scaffold Bracket DG 85 The Scaffold Bracket DG 85 for an 850 mm wide concreting scaffold.

Simply hook in and lock with pin.

DOMINO Lifting Hook Safe working load: 500 kg For lifting upright single panels or units. Always use 2 hooks for each unit being moved.

Large units can be moved with the DOMINO Lifting Hook.

Moving a stack of panels with DOMINO stacking device.

6

The 1.25 m high DOMINO panels have inset tie points and can be used on their sides without any problems.

0,75 m

1,25 m

DOMINO elements are also extremely suitable for forming foundations. One major benefit is the inset tie points of the 1.25 m high panel. These allow even foundation forms to be tied easily.

Wall footings and single-column footings with the foundation tie spanner and tie bracket. – The DOMINO foundation tie clamp for shuttering foundations easily and replaces the bottom tie position and saves work space and hence earthworks. – Ties are tensioned accurately with a self-cleaning hexagonal spindle. – Using the top tie bracket for the top tie point avoids the DOMINO panels having to be aligned exactly. It is possible to tie at any position on the panel. Strip foundations and single footings with the DLS foundation tie spanner (below) and DAH tie bracket (above).

Foundation Tie Clamp DLS Item no. 066090

Perforated Foundation Tie, 25 m roll Item no. 023020

Top Tie Bracket DAH Item no. 066086

7

DOMINO Panel Formwork Panel D 250 x 100 Panel with steel frame and formlining 15 mm.

2500

530

1440

530

Item no. Weight kg 066020 87,700

1000

71,600

Panel D 250 x 75 Panel with steel frame and formlining 15 mm.

2500

530

1440

530

066022

117

750

54,500

Panel D 250 x 50 Panel with steel frame and formlining 15 mm.

2500

530

1440

530

066025

117

500

8

117

DOMINO Panel Formwork Panel D 250 x 25 Panel with steel frame and formlining 15 mm.

2500

530

1440

530

Item no. Weight kg 066026 37,700

250

59,500

Panel DA 250 x 100 Panel with aluminium frame and formlining 15 mm.

2500

530

1440

530

066021

117

1000

2500

530

Panel DA 250 x 75 Panel with aluminium frame and formlining 15 mm.

1440

47,500

530

066023

117

750

117

9

DOMINO Panel Formwork Item no. Weight kg 76,500 50,200

Multi Panels DM/DMA 250 Multi Panel DM 250 x 75 Multi Panel DMA 250 x 75 Panel Steel/Alu with formlining 15 mm. For oblique angles, wall connections etc..

Complete with 46 x 030290 Plug Ø 20 mm

2500

1440

530

066024 066032

750 22 x 30 = 660

45

39,000

Articulated Corner DGE 250 Made of aluminium. For oblique angles from 75° for the outside and inside.

Complete with 2 x 066100 Corner Locking DEA 90°

2500

1440

530

066029

117

530

45

250

250

530

117

250

7,820 11,600

Wall Thickness Compensations DWD 250 Wall Thickness Compensation DWD 250 x 5 Wall Thickness Compensation DWD 250 x 10 For adaptating to different wall thicknesses.

2500

10

50

27

100

117

530

27

117

1440

530

066030 101986

DOMINO Panel Formwork Outside Corner Angle DAW 250 For panel connection at 90° external corners.

2500

Item no. Weight kg 066028 10,500

117

117

4,150

Filler Support DPA 250 For infillings with 21 mm plywood.

45

Shaft Panel DSE 275 For lifting complete internal formwork in shafts.

Safety instructions Load-bearing point: max. capacity 2.0 t.

500

117

148,000

2750

111603

93 / 87

2490

066033

11

DOMINO Panel Formwork Item no. Weight kg 111665 4,360

Spindle Shaft Panel DSE For use with Shaft Panel DSE. For spindling back to the starting position. 1 piece per Shaft Panel DSE.

Complete with 2 x 105822 Pin Ø 20 x 102, galv. 2 x 022230 Cotter Pin 5/1, galv. Note Spanner size SW 24. SW 24

230

66

150

16,200 17,900

Stopend Panels DOMINO AT 250 Stopend Panel DOMINO AT 250 x 3 Stopend Panel DOMINO AT 250 x 5 Outside piece for stopend formwork.

Note Concrete cover approx. 30 or 50 mm.

2500

101927 108855

248

AT 250 x 3

27,100 31,200 36,000 39,700

Stopend Panels DOMINO MTF 250 Stopend Panel DOMINO MTF 250 x 20 Stopend Panel DOMINO MTF 250 x 24/25 Stopend Panel DOMINO MTF 250 x 30 Stopend Panel DOMINO MTF 250 x 35/36 With water stop bar for stopend formwork.

B 118 158 218 268

2500

101928 101929 101930 101931

120

B

12

117

210

117

210

AT 250 x 5

DOMINO Panel Formwork Panel D 125 x 100 Panel with steel frame and formlining 15 mm.

930 280

1250

40

Item no. Weight kg 066040 47,300

1000

38,700

Panel D 125 x 75 Panel with steel frame and formlining 15 mm.

930 40

240

1250

40

066041

117

750

28,600

Panel D 125 x 50 Panel with steel frame and formlining 15 mm.

930 280

1250

40

066043

117

500

930

40

Panel D 125 x 25 Panel with steel frame and formlining 15 mm.

1250

18,600

280

066044

117

250

117

13

DOMINO Panel Formwork Panel DA 125 x 100 Panel with aluminium frame and formlining 15 mm.

930 280

1250

40

Item no. Weight kg 066050 31,000

1000

24,800

Panel DA 125 x 75 Panel with aluminium frame and formlining 15 mm.

930 40 240

750

43,700 27,300

Multi Panels DM/DMA 125 Multi Panel DM 125 x 75 Multi Panel DMA 125 x 75 Panel Steel/Alu with formlining 15 mm. For oblique angle, wall connections etc..

117

Complete with 46 x 030290 Plug Ø 20 mm

22 x 30 = 660

45

117

1250

750 45

280

932

38

066042 066052

1250

40

066051

117

21,300

Articulated Corner DGE 125 Made of aluminium. For oblique angles from 75° for the outside and inside.

Complete with 1 x 066100 Corner Locking DEA 90°

40

066047

250

250

117

930 280

14

1250

250

DOMINO Panel Formwork Item no. Weight kg 4,030 5,940

Wall Thickness Compensators DWD 125 Wall Thickness Compensator DWD 125 x 5 Wall Thickness Compensator DWD 125 x 10 For adaptating to different wall thicknesses.

5,490

100

Outside Corner Angle DAW 125 For panel connection at 90° external corners.

1250

066046

27

117

50

117

27

280

930

1250

40

066048 101964

117

117

77,100

Shaft Panel DSE 125 For lifting complete internal formwork in shafts.

Safety instructions Load-bearing point: max. capacity 2.0 t.

500

117

111655

45

93 / 87

Filler Support DPA 125 For infillings with 21 mm plywood.

1250

2,070

1240

066053

15

DOMINO Panel Formwork Item no. Weight kg 8,140 8,980

Stopend Panels DOMINO AT 125 Stopend Panel DOMINO AT 125 x 3 Stopend Panel DOMINO AT 125 x 5 Outside piece for stopend formwork.

Note Concrete cover approx. 30 or 50 mm.

1250

AT 125x3

210

117

210

14,600 15,200 17,500 19,300

Stopend Panels DOMINO MTF 125 Stopend Panel DOMINO MTF 125 x 20 Stopend Panel DOMINO MTF 125 x 24/25 Stopend Panel DOMINO MTF 125 x 30 Stopend Panel DOMINO MTF 125 x 35/36 With water stop bar for stopend formwork.

B 118 158 218 268

B 120

1250

101935 101936 101937 101940

Panel D 75 x 25 Panel with steel frame and formlining 15 mm.

280

750

12,100

430 40

066064

250

Panel D 75 x 50 Panel with steel frame and formlining 15 mm.

280

430 40

19,300

117

750

066063

500

Panel D 75 x 75 Panel with steel frame and formlining 15 mm.

750

16

750

26,600

117

280 430 40

066061

AT 125x5

117

117

101934 108856

DOMINO Panel Formwork

280

430 40

Panel D 75 x 100 Panel with steel frame and formlining 15 mm.

750

Item no. Weight kg 066060 32,400

1000

066062

31,600

Multi Panel DM 75 x 75 Panel with steel frame and formlining 15 mm. For oblique angles, wall connections, stopend formwork etc.

117

Complete with 23 x 030290 Plug Ø 20 mm

45

117

750

22 x 30 = 660

280

432 38

750 45

066067

12,800

Articulated Corner DGE 75 Made of aluminium. For oblique angles from 75° for the outside and inside.

Complete with 1 x 066100 Corner Locking DEA 90°

117

Wall Thickness Compensator DWD 75 x 5 For adaptating to different wall thicknesses. 27

50

117

280

430 40

2,520

066066

3,500

250

750

066068

250

750

280 430 40

250

Outside Corner Angle DAW 75 For panel connection at 90° external corners.

117

750

117

Corner Locking DEA 90° For 90° inside corners.

120

165

1,470

60

066100

120

17

DOMINO Panel Formwork Item no. Weight kg 066095 1,060

Positioning Pin DGE 135° internal For 135° internal corners.

Complete with 2 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 308

40

M 12x40

066097

1,560

Positioning Pin DGE 135° external For 135° external corners.

Complete with 2 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv. 470

40

M 12x40

066080

3,630

Alignment Coupler DRS For all DOMINO panel connections. Compensations up to 12 cm possible. 61

127

max 173

288

1,160

Wedge Clamp DKS For standard DOMINO panel connections not under high load.

151

133

25

066081

259

109

066084

8,510

Compensation Waler DAR 80 For length compensations, height extensions, stopend formwork and special applications for DOMINO. With captive connection components. 60

40

18

165

112

40

790

DOMINO Panel Formwork Item no. Weight kg 066085 6,570

Scaffold Bracket DG 85 For assembly of working and concreting scaffolds for DOMINO.

Technical Data Permissible load 150 kg/m2 with maximum width of influence 2.00 m. 45

653

1044

106877

2,730

Accessories Guardrail Post HSGP Guardrail Post Holder DOMINO For assembly of guardrails on DOMINO panels.

Complete with 1 x 018060 Cotter Pin 4/1, galv. Technical Data Maximum width of influence 2.00 m.

28

3,520

146

213

349

034580

142

3,520

034580

3,520

Accessories Guardrail Post HSGP Guardrail Post HSGP As guardrail for different systems.

65

Stopend Tie-2 DSA For transferring forces from the stopend formwork to the DOMINO panels. Thread DW 15.

95 DW 15 443

174

2,100

150

110406

35

1300

1050

440

120

034580

19

DOMINO Panel Formwork Brace Connector DRA For connecting push-pull props and kickers to DOMINO panels.

Complete with 1 pc. 027170 Bolt Ø 16 x 42, galv. 1 pc. 018060 Cotter Pin 4/1, galv.

Ø16x42

120

Plug Ø 20 mm For sealing tie holes Ø 20 mm, which are not required.

Note Delivery unit 500 pieces.

Ø25

0,002

98

Ø21

030290

68

117

Item no. Weight kg 066082 1,040

13

027680

49,600

Connector SB-1,2 - MX/TR/D For assembling Brace Frame SB-1,2 to MAXIMO, TRIO and DOMINO panels.

Safety instructions Load-bearing point load capacity 1.0 t with a crane sling angle ≤ 15°. 240

490

650

1770

max 1650 min 1270

120

265

160

60

250

21

0,368 2,400 0,433 1,250

025740

9,140

Accessories Bolt Ø 19 x 165, galv. Hook Strap SB-1, 2 Bolt SB-MAXIMO, galv. Sleeve SB-MAXIMO, galv. Connector SB-A, B, C - MX/TR/D For assembling SB-A0, A, B, C to MAXIMO, TRIO and DOMINO panels.

Note One for each tie point.

125

027690 113255 114107

20

0,368 0,433 1,250

Accessories Bolt Ø 19 x 165, galv. Bolt SB-MAXIMO, galv. Sleeve SB-MAXIMO, galv.

120

130

027690 027590 113255 114107

130

DOMINO Panel Formwork Item no. Weight kg 027690 0,368

Bolt Ø 19 x 165, galv. For panel formwork with 12 cm overall height. 165 125

Ø19

066090

2,480

Foundation Tie Clamp DOMINO DLS For anchoring foundation formwork in combination with the Perforated Foundation Tie.

Note Spanner size SW 14.

152

0,676

Perforated Foundation Tie, 25 m roll For use with Foundation Tie Clamp TRIO, DOMINO and HANDSET.

Technical Data Permissible tension force 12,9 kN

20

50

023020

34

170

SW 14

50

066086

1,100

22

Top Tie Bracket DAH, galv. For tying at any position outside of the frame, particularly for foundations.

100

Ø20,5

100

80

112

Safety instructions Always use 2 pieces per transportation unit. Follow Instructions for Use. Load capacity 500 kg.

195

Lifting Hook DOMINO 500 kg For transporting DOMINO panels.

512

6,330

55

066091

88

187

100

21

DOMINO Panel Formwork Stacking Device DOMINO, galv. For stacking and transportation of 2-8 DOMINO panels of all sizes. Suitable for crane and fork-lift transportation. 4 pieces per stack.

Safety instructions Follow Instructions for Use. Load-bearing capacity: 250 kg per device, 1 t per stack.

Stacking Device DOMINO DSH Plastic. Prevents the element from sliding sideways. 30

0,020

19

066093

125

100

1115

Item no. Weight kg 066094 7,980

55

066099

0,030

Stacking Aid DOMINO DSW For stacking DOMINO panels. 4 pieces per stack.

22

50

49

50

23

PERI International

42

19 20 22

32 34

18 38 11

52 6 01 PERI GmbH Rudolf-Diesel-Strasse 89264 Weissenhorn info @ peri.com www.peri.com

21

1

5

17 2

46 30

3

16

13

29

28

9 53

24

48

4

41 61 33

02 France PERI S.A.S. 77109 Meaux Cedex [email protected] www.peri.fr

09 Italy PERI S.p.A. 20060 Basiano (MI) [email protected] www.peri.it

16 Austria PERI Ges.mbH 3134 Nußdorf ob der Traisen offi[email protected] www.peri.at

23 Korea PERI (Korea) Ltd. Seoul 135-080 [email protected] www.perikorea.com

29 Slovania PERI SLOWENIEN 2000 Maribor [email protected] www.peri.de

03 Switzerland PERI AG 8472 Ohringen [email protected] www.peri.ch

10 Japan PERI Japan K.K. Tokyo 103-0015 [email protected] www.perijapan.jp

17 Czech Republic PERI spol. s r.o. 252 42 Jesenice [email protected] www.peri.cz

24 Portugal PERIcofragens Lda. Linda-a-Pastora 2790-326 Queijas [email protected] www.peri.pt

30 Slovakia PERI spol. s r.o. 903 01 Senec [email protected] www.peri.sk

04 Spain PERI S.A. Sociedad Unipersonal 28110 Algete/Madrid [email protected] www.peri.es

11 United Kingdom/Ireland PERI Ltd. Rugby, CV23 0AN [email protected] www.peri.ltd.uk

18 Denmark PERI Danmark A/S 2670 Greve [email protected] www.peri.dk

05 Belgium/Luxembourg N.V. PERI S.A. 1840 Londerzeel [email protected] www.peri.be

12 Turkey PERI Kalıp ve İskeleleri Kıraç - Büyükçekmece/ Istanbul 34500 [email protected] www.peri.com.tr

19 Finland PERI Suomi Ltd. Oy 05460 Hyvinkää [email protected]fi www.perisuomi.fi

06 Netherlands PERI B.V. 5480 AH-Schijndel [email protected] www.peri.nl

13 Hungary PERI Kft.. 1181 Budapest [email protected] www.peri.hu

14 Malaysia 07 USA PERI Formwork Malaysia PERI Formwork Systems, Inc. 43300 Seri Kembangan, Elkridge, MD 21075 Selangor DE [email protected] [email protected] www.peri-usa.com www.perimalaysia.com 08 Indonesia PT Beton Perkasa Wijaksana 15 Singapore PERI ASIA Pte. Ltd Jakarta 10210 Singapore 387355 [email protected] [email protected] www.peri.de www.periasia.com

24

20 Norway PERI NORGE AS 3036 Drammen [email protected] www.peri.no 21 Poland PERI Polska Sp. z o.o. 05-860 Płochocin [email protected] www.peri.pl.pl 22 Sweden PERIform SVERIGE AB 30013 Halmstad [email protected] www.periform.se

25 Argentina PERI S.A. (1625) Escobar/Prov. Bs. As. [email protected] www.peri.com.ar 26 Brazil PERI Formas e Escoramentos Ltda. CEP 06730-000 Vargem Grande Paulista São Paulo [email protected] www.peribrasil.com.br 27 Chile PERI Chile Ltda. Colina, Santiago de Chile [email protected] www.peri.cl 28 Romania PERI România SRL 077015 Baloteşti - ILFOV [email protected] www.peri.ro

31 Australia PERI Australia Pty. Ltd. Glendenning NSW 2761 [email protected] www.periaus.com.au 32 Estonia PERI AS 76406 Saku vald Harjumaa [email protected] www.peri.ee 33 Greece PERI Hellas Ltd. 194 00 Koropi [email protected] www.perihellas.gr 34 Latvia PERI SIA 1057 Riga [email protected] www.peri-latvija.lv 35 United Arab Emirates PERI (L.L.C.) Dubai [email protected] www.perime.com

12

44

36

43 7

50 39 60

49

47

23

51

37 40 57 56

54

58

59 35

10

55

63 14 15 8 26

62

27

31

45 25

42 Iceland 36 Canada MEST ltd., PERI Formwork Systems, Inc. 220 Hafnarfjordur Bolton, Ontario [email protected] L7E 1K1 www.mest.is [email protected] www.peri.ca 43 Kazakhstan TOO PERI Kazakhstan 37 Libanon 050010 Almaty PERI GmbH [email protected] Beirut www.peri.kz P.O. Box 90 416 Jdeidet [email protected] 44 Russian Federation www.peri.de OOO PERI 142403 Noginsk 38 Lithuania [email protected] PERI UAB www.peri.ru 02300 Vilnius [email protected] 45 South Africa www.peri.lt PERI Wiehahn (Pty.) Ltd. Bellville 7535 39 Marocco [email protected] PERI S.A. www.periwiehahn.co.za Tanger [email protected] 46 Ukraine www.peri.de TOW PERI Ukraina 07400 Brovary 40 Israel [email protected] PERI Formwork www.peri.ua Engineering Ltd 49002 Israel 47 Egypt [email protected] PERI GmbH www.peri.co.il 11361 Heliopolis Cairo 41 Bulgaria [email protected] PERI BULGARIA EOOD www.peri.com.eg 1839 – Sofia per[email protected] 48 Serbia www.peri.bg PERI Oplate d.o.o.

11272 Dobanovci offi[email protected] www.peri.co.yu

49 Mexico PERI Cimbras y Andamios, S.A. de C.V. Estado de México, C.P. 54680 [email protected] www.peri.com.mx 50 Azerbaijan PERI Kalıp ve İskeleleri Baku [email protected] www.peri.com.tr 51 Turkmenistan PERI Kalıp ve İskeleleri 744035 Aşgabat [email protected] www.peri.com.tr 52 Belorussia PERI Belarus 220030 Minsk [email protected] www.peri.com.tr 53 Croatia PERI oplate i skele d.o.o. 10 250 Donji Stupnik/ Zagreb [email protected] www.peri.com.hr 54 Iran PERI GmbH Building No. 4 P.O. Box 1939793669 Teheran-Iran [email protected] www.peri.ir

55 India PERI (India) Pvt Ltd Mumbai – 400064 [email protected] www.peri.in

62 Peru PERI Peruana SAC Lima/Peru [email protected] www.peri.com.pe

56 Jordan PERI Jordan 11947 Amman [email protected] www.peri.de

63 Panama PERI Panama Inc. 587 Panama City [email protected] www.peri.com.pa

57 Kuwait PERI Kuwait 13011 Kuwait [email protected] www.peri.de 58 Saudi Arabia PERI Saudi Arabia Jeddah - 21463 K.S.A [email protected] www.peri.de 59 Qatar PERI Qatar LLC Doha [email protected] www.peri.de 60 Algeria Société PERI S.A.S. Kouba - Alger [email protected] www.peri.fr 61 Albania Autostrada TIRANE-DURRES Tirane / ALBANIA [email protected] www.peri.com.tr

25

Wall Formwork Panel Formwork Girder Formwork Circular Formwork Facade Formwork Brace Frame

Climbing Systems Climbing Scaffold Self-Climbing System Climbing Protection Panel Platform Systems

Column Formwork Square Rectangular Circular

Scaffold, Stairways, Working Platforms Facade Scaffold Working Platform Weather Protection Roof Stairway Access

Slab Formwork Panel Formwork Beam Grid Formwork Girder Formwork Slab Table Beam Formwork

Bridge and Tunnel Formwork Cantilevered Parapet Carriage Cantilevered Parapet Platform Engineer’s Construction Kit

Shoring Systems Steel Slab Props Aluminium Slab Props Tower Systems Heavy-Duty Props

Services Formwork Assembly Cleaning / Repairs Formwork Planning Software Statics Special Constructions

Additional Systems Plywood Formwork Girders Stopend Systems Pallets Transportation Containers

PERI GmbH Formwork Scaffolding Engineering P.O. Box 1264 89259 Weissenhorn Germany Tel +49 (0)73 09.9 50- 0 Fax +49 (0)73 09.9 51- 0 [email protected] www.peri.com

D e 01/2010 10ma Art.-Nr.: 790352 © Copyright by PERI GmbH

PERI Product Range

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF